Determine the de Broglie wavelength of an electron with a velocity of 8.4 x 106 m/s. The mass of the electron is 9.1 x 10-31 kg. A. 8.8 x 10-16 m B. 8.7 x 10-11 m C. 9.8 x 10-12 m D. 6.7 x 10-11 m E. 3.8 x 104 m

A battery charger is connected to a dead battery and delivers a current of 5.0 A for 6 hours, keeping the voltage across the battery terminals at 2 V in the process the battery charger delivers 60 watt-hours (Wh) of energy to the dead battery.

To calculate the energy delivered to the battery, we can use the formula: Energy = Power x Time

We know that the current delivered by the battery charger is 5.0 A and the voltage across the battery terminals is 2 V. Using Ohm's law (V = IR), we can calculate the power delivered to the battery:

Power = Voltage x Current
Power = 2 V x 5.0 A
Power = 10 Watts

Now we can calculate the energy delivered to the battery:

Energy = Power x Time
Energy = 10 W x 6 hours
Energy = 60 Wh (watt-hours)

Therefore, the battery charger delivered 60 watt-hours of energy to the dead battery.
Learn more about battery here: brainly.com/question/11670669

#SPJ11

The wavelength of the photon of light produced by a surgical laser is approximately 656 nm.

To calculate the wavelength of a photon, you can use the equation:

E = h * c / λ

Where E is the energy of the photon (3.027 x 10⁻¹⁹ J), h is the Planck's constant (6.626 x 10⁻³⁴ Js), c is the speed of light (3.0 x 10⁸ m/s), and λ is the wavelength.

First, rearrange the equation to solve for λ:

λ = h * c / E

Now, plug in the given values:

λ = (6.626 x 10⁻³⁴ Js) * (3.0 x 10⁸ m/s) / (3.027 x 10⁻¹⁹ J)

λ ≈ 6.56 x 10⁻⁷ m

To convert the wavelength to nanometers (nm), multiply by 10⁹:

λ ≈ 6.56 x 10⁻⁷ m * 10⁹nm/m

λ ≈ 656 nm

So, the wavelength of the photon is approximately 656 nm.

Learn more about wavelength here: https://brainly.com/question/28995449

#SPJ11

To steadily increase the velocity of something, it requires c. constant net force.

According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. Mathematically, this is represented as F = ma, where F is the net force, m is the mass, and a is the acceleration.  When a constant net force acts on an object, it causes the object to accelerate at a constant rate. This acceleration leads to a steady increase in the object's velocity.

It is important to note that a steadily increasing force would result in an object experiencing an increasing acceleration, which would cause the velocity to increase at an increasing rate rather than steadily. On the other hand, a decreasing force would result in a decreasing acceleration, causing the velocity to increase at a slower rate or even decrease. In conclusion, to steadily increase the velocity of an object, a constant net force must be applied to it. This constant force leads to a constant acceleration, which in turn results in a steady increase in the object's velocity.

To learn more about Newton's second law here:

https://brainly.com/question/13447525

#SPJ11

There will likely be a temperature difference between the West and East sides of the mountain, with the West side being cooler than the East side due to adiabatic cooling.

When air is forced to rise over a mountain, it expands and cools due to the decrease in atmospheric pressure at higher altitudes. This process is known as adiabatic cooling. As the air cools, any moisture in the air may condense and form clouds, leading to precipitation on the windward (West) side of the mountain.

As the now-dry air descends on the leeward (East) side of the mountain, it compresses and warms due to the increase in atmospheric pressure at lower altitudes, a process known as adiabatic warming. This warming and drying of the air leads to drier and warmer conditions on the East side of the mountain compared to the West side.

Therefore, assuming a prevailing wind blowing from West to East, we would expect a temperature difference between the two sides of the mountain, with the West side being cooler and potentially wetter due to the adiabatic cooling and precipitation, respectively.

learn more about adiabatic here:

https://brainly.com/question/14930930

#SPJ11

The current understanding based on observations is that the expansion rate of the universe is increasing with time.

The universe refers to the vast expanse of space that encompasses everything we can observe, including planets, stars, galaxies, and all forms of matter and energy. It is estimated to be about 13.8 billion years old and is constantly expanding.

The universe is governed by fundamental laws of physics, such as gravity, electromagnetism, and the strong and weak nuclear forces. These laws dictate the behavior of matter and energy, from the smallest subatomic particles to the largest structures in the cosmos. The universe remains a fascinating and complex topic that continues to capture the imagination of people around the world.

To learn more about Universe visit here:

brainly.com/question/9724831

#SPJ4

The internal pressure of the gas will increase by a factor of three if the volume of the gas inside the container is reduced by three times at a constant temperature.

According to Boyle's Law, which states that at a constant temperature, the pressure and volume of a gas are inversely proportional, the pressure of the gas will increase by a factor of three if the volume is reduced by three times. This means that the internal pressure of the gas inside the container will increase.

Mathematically, the relationship between pressure (P) and volume (V) of a gas is expressed as P₁V₁ = P₂V₂, where P₁and V₁ are the initial pressure and volume, respectively, and P₂ and V₂ are the final pressure and volume, respectively. If the volume (V₂) is reduced by three times, then V₂ = (1/3)V1. Substituting this value in the equation above, we get:

P₁V₁ = P₂(1/3)V1

Simplifying, we get:

P₂ = 3P1

This means that the pressure of the gas will increase by a factor of three. Therefore, if the volume of a gas inside a container is reduced by three times at a constant temperature, the internal pressure of the gas will increase by a factor of three.

Learn more about Boyle's Law

https://brainly.com/question/30367133

#SPJ4

The purpose of the extended frequency range of a high-fidelity sound system is to reproduce sounds that are beyond the range of human hearing.

While most people can hear sounds up to around 20,000 Hz, some individuals, particularly young children, can hear sounds up to 30,000 Hz or higher. In addition, sounds at higher frequencies can contribute to the overall quality and clarity of the audio signal, even if they are not consciously perceived by the listener.

Furthermore, even if the listener cannot perceive the sound directly, higher frequency components can influence the perception of other frequencies in the audio signal. For example, harmonics of a particular note can contribute to the overall timbre or tone of a musical instrument, even if they are not heard as distinct pitches.

Additionally, higher frequency components are important for various technical reasons, such as ensuring that the system has adequate bandwidth for transmitting digital audio signals or for reproducing sounds with high levels of distortion or noise.

Know more about frequency here:

https://brainly.com/question/5102661

#SPJ11

The car's initial velocity is 27 m/s and it slows down at a constant rate of 5.4 m/s^2 for 3 seconds. The car's velocity at the end of 3 seconds is 10.8 m/s.

We the equation v = u + at
Substituting the given values, we get:
v = 27 + (-5.4 x 3)
v = 27 - 16.2
v = 10.8 m/s
Therefore, the car's velocity at the end of 3 seconds is 10.8 m/s.
This means that the car has slowed down by 16.2 m/s from its initial velocity of 27 m/s. It's important to note that the negative sign in the equation indicates that the car's velocity is decreasing. The acceleration of 5.4 m/s^2 is negative because it's acting against the direction of motion, which is towards the negative direction of the velocity axis.
In conclusion, the car's velocity at the end of 3 seconds is 10.8 m/s, which means it has slowed down by 16.2 m/s from its initial velocity of 27 m/s at a constant rate of 5.4 m/s^2.

for more such questions on   velocity

https://brainly.com/question/80295

#SPJ11

The magnitude of the acceleration due to gravity at the surface of a sphere of radius 1.6 m with the given density is approximately 16.1 m/s^2.

The magnitude of the acceleration due to gravity :

g = (4/3) * π * G * ρ * R

Plugging in the values given, we get:

g = (4/3) * π * 6.67 x 10^-11 * 7900 * 1.6

g ≈ 16.1 m/s^2

Therefore, the magnitude of the acceleration due to gravity at the surface of a sphere of radius 1.6 m with the given density is approximately 16.1 m/s^2.

To know more about acceleration due to gravity refer here:

https://brainly.com/question/13860566

#SPJ11

The velocity of the man and the skateboard after the jump is  6.92 m/s

When the 80 kg man jumps onto the stationary 3 kg skateboard with frictionless wheels, the two objects will form a system. According to the Law of Conservation of Momentum, the total momentum of the system will remain constant as long as no external forces are acting on it.

Initially, the total momentum of the system is given by:

P1 = (80 kg)(7 m/s) + (3 kg)(0 m/s) = 560 kg m/s

Here, the man has a horizontal velocity of 7 m/s, while the skateboard is stationary.

As the man jumps onto the skateboard, the momentum of the system is conserved, and the skateboard and the man move together. Assuming that there is no external force acting on the system, the total momentum of the system remains constant.

The final momentum of the system, P2, is given by:

P2 = (80 kg + 3 kg) v

Here, v is the velocity of the man and the skateboard after the jump.

According to the Law of Conservation of Momentum, P1 = P2. Therefore:

560 kg m/s = (80 kg + 3 kg) v

Solving for v, we get:

v = 6.92 m/s

This means that the man and the skateboard move together with a velocity of 6.92 m/s after the jump.

In conclusion, when the 80 kg man jumps onto the stationary 3 kg skateboard with frictionless wheels, the two objects form a system. The momentum of the system is conserved, and the man and the skateboard move together with a velocity of 6.92 m/s after the jump.

Know more about velocity here:

https://brainly.com/question/80295

#SPJ11

The part of a microscope that focuses on divergent light rays is the condenser. Option (d)

The condenser is located below the stage and collects light from the light source then concentrates and directs it onto the specimen on the stage. It consists of a lens or lenses that focus the light and an aperture that controls the amount of light passing through.

The condenser plays an important role in the quality of the image produced by a microscope, as it determines the intensity and uniformity of the illumination of the specimen. By adjusting the focus and aperture of the condenser, it is possible to optimize the image clarity and contrast.

Learn more about The condenser

https://brainly.com/question/1447093

#SPJ4

The average intensity of the electromagnetic wave with a peak electric field value of 250.0 N/C is approximately 0.89 W/m².

To determine the average intensity of an electromagnetic wave with a peak electric field value of 250.0 N/C, we will follow these steps:
1. Recall the equation for the intensity of an electromagnetic wave: I = (1/2) * ε₀ * c * E², where I is the intensity, ε₀ is the permittivity of free space (8.85 x 10^(-12) C²/Nm²), c is the speed of light in a vacuum (3 x 10^8 m/s), and E is the peak electric field value (250.0 N/C in this case).
2. Plug the given values into the intensity equation: I = (1/2) * (8.85 x 10^(-12) C²/Nm²) * (3 x 10^8 m/s) * (250.0 N/C)².
3. Perform the calculation: I ≈ 0.834 W/m².
4. Compare the calculated intensity to the given options: a) 0.66 W/m², b) 0.89 W/m², c) 83 W/m², d) 120 W/m², and e) 170 W/m².
5. Based on the calculated value, the closest option is b) 0.89 W/m².

learn more about electromagnetic wave Refer: https://brainly.com/question/3101711

#SPJ11

complete question :

value of 250.0 NIC. An electromagnetic wave has an electric field with a peak value of What is the average intensity of the wave? a) 0.66 W/m?  b) 0.89 W/m2 c) 83 W/m  d) 120 W/m2 e) 170 W/m2

The change in angular momentum of the wheel is 20 Nms (counterclockwise).

To calculate the change in angular momentum of the wheel, we can use the formula:

Change in angular momentum (ΔL) = Torque (τ) * Time (t)

Given:

Angular velocity (ω) = 6.0 rad/s (counterclockwise)

Torque (τ) = 5.0 Nm (counterclockwise)

Time (t) = 4.0 s

First, we need to calculate the initial angular momentum (L_initial) of the wheel. Angular momentum is given by the formula:

Angular momentum (L) = Moment of inertia (I) * Angular velocity (ω)

Since the moment of inertia is not provided, we cannot calculate the exact change in angular momentum. However, assuming the moment of inertia remains constant, we can calculate the change in angular momentum relative to the initial angular momentum.

Let's assume the initial angular momentum of the wheel is L_initial.

ΔL = τ * t

ΔL = (5.0 Nm) * (4.0 s)

Calculating the result:

ΔL = 20 Nms

Therefore, assuming the moment of inertia remains constant, the change in angular momentum of the wheel is 20 Nms (counterclockwise).

To learn more about inertia, refer below:

https://brainly.com/question/3268780

#SPJ11

The density calculation methods. When comparing the two methods for density calculation, direct measurements and water displacement, accuracy and precision come into play. Accuracy refers to how close a measurement is to the true value, while precision indicates the consistency of measurements.

In terms of accuracy, the water displacement density method is generally considered more accurate than direct measurements. This is because water displacement accounts for irregularities in the shape and size of the object being measured.  Direct measurements, on the other hand, require assumptions about the object's shape, which may lead to inaccuracies. As for precision, direct measurements can be more precise if the measuring tools, such as calipers or rulers, are of high quality and used skillfully. However, the water displacement method can also provide precise results when performed carefully and with precise measuring equipment for the water displaced. Ultimately, the precision of either method depends on the quality of the tools used and the experimenter's skill. In summary, the water displacement method is generally more accurate in density calculations due to its ability to account for irregular object shapes, while the precision of both methods depends on the quality of the tools used and the skill of the experimenter.

learn more about accuracy here.

https://brainly.com/question/14244630

#SPJ11

According to an observer on Earth, the trip took approximately 5.2 years.

According to special relativity, time dilation occurs as an object approaches the speed of light. This means that time appears to pass more slowly for an object moving relative to an observer than it does for the observer.

In this scenario, the spaceship travels to a star that is 4.5 light-years from Earth at one-half the speed of light. To determine the time it took for the trip according to an observer on Earth, we can use the time dilation equation:

t = t_0 / √(1 - v^2/c^2)

where t_0 is the proper time (the time experienced by an observer on the spaceship), v is the velocity of the spaceship, and c is the speed of light.

Plugging in the values, we get:

t = 4.5 years / √(1 - (0.5c)^2/c^2)

t = 4.5 years / √(1 - 0.25)

t = 4.5 years / √0.75

t = 4.5 years / 0.866

t ≈ 5.2 years

Therefore, according to an observer on Earth, the trip took approximately 5.2 years.

To learn more about spaceship  visit;

brainly.com/question/30031772

#SPJ11

When the driver slams on the brakes, the brakes apply a force to the wheels, which slows down the car. As the car slows down, its kinetic energy is converted into other forms of energy, such as heat and sound, due to friction between the wheels and the road surface.

The amount of kinetic energy that the car had just before stopping is transformed into other forms of energy, and it is no longer in the form of kinetic energy. This energy is dissipated and lost to the environment as the car comes to a complete stop. The energy is transferred to the brake pads and the surrounding air as heat and to the surrounding environment as sound energy. Therefore, the kinetic energy of the car is converted to other forms of energy, resulting in the car coming to a halt.

Learn more about kinetic energy

https://brainly.com/question/15764612

#SPJ4

The force of gravity does no work on objects in orbit because the gravitational force and the object's displacement are always perpendicular to each other.

In physics, work is defined as the product of the force acting on an object and the displacement of the object in the direction of the force (W = Fd*cos(θ)), where θ is the angle between the force and displacement vectors.

In the case of objects in orbit:
1. The gravitational force is always directed towards the center of the Earth.
2. The object's displacement, as it moves in orbit, is always tangential to its circular path.

As a result, the angle between the gravitational force and the object's displacement is always 90 degrees (perpendicular). Since the cosine of 90 degrees is zero (cos(90°) = 0), the work done by the gravitational force on an object in orbit is also zero (W = Fd*cos(90°) = Fd*0 = 0). This is why the force of gravity does no work on objects in orbit.

To learn more about gravitational force refer here:

https://brainly.com/question/12528243#

#SPJ11

the velocity of the sphere immediately after hitting the block is 3.43 m/s. The velocity of the sphere immediately after hitting the block can be found using conservation of energy.

The initial potential energy of the sphere is mgh, where m is the mass of the sphere, g is the acceleration due to gravity, and h is the initial height of the sphere. When the sphere hits the block, some of its potential energy is converted to kinetic energy, and the rest is absorbed by the block. The kinetic energy of the sphere just after hitting the block is (1/2)mv^2, where v is the velocity of the sphere. The final potential energy of the sphere is mgh', where h' is the height the sphere reaches on the other side.

Therefore, using conservation of energy:

mgh = (1/2)mv^2 + mgh'

Solving for v, we get:

v = sqrt(2gh - 2gh')

Substituting the given values, we get:

v = sqrt(2 * 9.81 m/s^2 * (1 m - 0.4 m - 1.2 m))

Simplifying, we get:

v = sqrt(2 * 9.81 m/s^2 * (-0.6 m))

v = 3.43 m/s

Learn more about conservation of energy here:

https://brainly.com/question/13949051

#SPJ11

The correct option is A, A typical galaxy is a collection of a few hundred million to a trillion or more stars, bound together by gravity.

A galaxy is a massive system of stars, planets, gases, and other space debris held together by gravity. It is believed that there are billions of galaxies in the observable universe. Galaxies come in different shapes, sizes, and colors, and are classified according to their morphology. Spiral galaxies have a central bulge surrounded by arms that spiral outwards, while elliptical galaxies have a more rounded shape. Irregular galaxies have no discernible shape.

The Milky Way is the galaxy that contains our Solar System and is a barred spiral galaxy. Galaxies can be further classified into active and inactive. Active galaxies have a supermassive black hole at their center, which is actively consuming matter and producing high-energy radiation. In contrast, inactive galaxies have a quiet central region.

To learn more about Galaxy visit here:

brainly.com/question/24836631

#SPJ4

The first law of thermodynamics is a fundamental principle of physics that states that the total energy of the universe is constant.

This means that energy can neither be created nor destroyed; it can only be transferred or transformed from one form to another. In other words, the total amount of energy in the universe remains constant although it may be converted from one form to another.

This law has far-reaching implications for our understanding of the physical universe. It tells us that energy is always conserved, and that any change in the energy of a system must be balanced by an equal and opposite change elsewhere in the universe. This is why the change in energy of the universe is always zero.

The first law of thermodynamics is particularly important in the field of thermodynamics, which is concerned with the study of energy and its transformation in systems. It provides a framework for understanding how energy is transferred and transformed in systems, and is fundamental to our understanding of the natural world.

Overall, the first law of thermodynamics is a powerful principle that underlies much of modern physics and engineering. It tells us that energy is always conserved and that any change in energy must be balanced by a corresponding change elsewhere in the universe.

Know more about first law of thermodynamics here:

https://brainly.com/question/26035962

#SPJ11

If Earth were 4.0 times farther away from the Sun, the gravitational force between them would be 1/16th (or 0.0625) of its original strength.

Let's consider the inverse square law of gravitation.

According to Newton's law of universal gravitation, the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers.

Mathematically, the gravitational force (F) can be expressed as:

F = (G * M * m) / r^2,

where G is the gravitational constant, M and m are the masses of the two objects (in this case, the Sun and Earth), and r is the distance between their centers.

If Earth were 4.0 times farther away from the Sun, the new distance (r') would be four times the current distance (r):

r' = 4.0 * r.

Now, let's examine how the gravitational force changes with this new distance. We can compare the original force (F) with the new force (F'):

F' = (G * M * m) / r'^2.

Substituting r' = 4.0 * r, we have:

F' = (G * M * m) / (4.0 * r)^2,

= (G * M * m) / (16 * r^2),

= F / 16.

Therefore, if Earth were 4.0 times farther away from the Sun, the gravitational force would be 1/16th (or 0.0625) of its original strength.

In other words, it would be 16 times weaker. This demonstrates the inverse square relationship between distance and gravitational force, where doubling the distance leads to a fourfold decrease in the force, and so on.

To learn more about force, refer below:

https://brainly.com/question/13191643

#SPJ11

The lesson illustrated by flood data from the Colorado River and the Yellowstone River is that the largest flood possible along a river is likely to have been witnessed by humans.

Historical flood data from these rivers shows that the largest floods recorded were witnessed by humans, indicating that it is unlikely for a larger flood to occur in the future. This provides insight into the potential risks and impacts of flooding in these areas and can inform future flood management and mitigation strategies. Option A is not supported by the data, as there have been larger floods than those recorded in the past 50 years. Option C is also not supported by the data, as some floods have exceeded 10,000 cubic meters per second.

Flood data from the Colorado River and the Yellowstone River illustrate that historical records may not provide an accurate representation of the largest possible floods or their frequency. The data cannot confirm options A, B, or C as definitive lessons because flood events can be unpredictable, and relying solely on human observation or past records may not account for rare or unprecedented events.

To know more about flood, visit:

https://brainly.com/question/20783715

#SPJ11

The flux density inside the bar of metal is 5348 times the magnetic field intensity inside the coil.

The magnetic susceptibility (χ) of a material is defined as the ratio of its magnetization (M) to the applied magnetic field intensity (H), i.e., χ = M/H.

The magnetic field intensity is related to the magnetic flux density (B) by the permeability of the material (μ), i.e., B = μH, where μ is the permeability of the material.

For a material with a relative permeability of μr, the permeability is given by μ = μ0μr, where μ0 is the permeability of free space.

Assuming that the bar of metal is placed inside a coil with a known magnetic field intensity (H), we can calculate the magnetic flux density (B) inside the bar using the formula:

B = μH

where μ is the permeability of the material.

Since the magnetic susceptibility of the bar of metal is given (χ = 1.87 x 10^-4), we can use the relationship between magnetization and susceptibility, which is:

M = χH

where M is the magnetization of the material.

We also know that the magnetic permeability of the bar is equal to the permeability of free space (μ0) multiplied by its relative permeability (μr), i.e., μ = μ0μr. The relative permeability is not given, so we will assume that it is equal to 1 (i.e., the material is non-magnetic), which gives μ = μ0.

Therefore, we can calculate the magnetic flux density inside the bar using:

[tex]B = μH = μ0H = M/χH = (1.0/1.87 x 10^-4)H = 5348H tesla[/tex]

where H is the known magnetic field intensity inside the coil, and [tex]μ0 = 4π x 10^-7[/tex]T·m/A is the permeability of free space.

So the flux density inside the bar of metal is 5348 times the magnetic field intensity inside the coil.

Learn more about  magnetic field

https://brainly.com/question/14848188

#SPJ4

The spring constant is 0.943 N/m. The spring pushes the object back towards its original position and this energy is converted into kinetic energy.

The system in this scenario consists of the 250. g object and the spring it is attached to. When the object is pushed against the spring, it compresses and stores potential energy. When released, the spring pushes the object back towards its original position and this energy is converted into kinetic energy.

The fact that the system experiences 12 cycles every 20 seconds tells us that the object oscillates back and forth 12 times in 20 seconds. One full oscillation is equal to the object moving from its starting position, to the maximum displacement from that position, back to the starting position, and then to the maximum displacement in the opposite direction, before returning again to the starting position.

To find the spring constant, we can use the equation for the period of oscillation of a mass-spring system:

T = 2π * sqrt(m/k)

where T is the period of oscillation, m is the mass of the object, and k is the spring constant.

We know that T = 20 s / 12 = 1.67 s (since there are 12 cycles in 20 seconds). We also know that m = 250. g = 0.25 kg.

Plugging these values into the equation, we can solve for k:

1.67 s = 2π * sqrt(0.25 kg/k)

1.67 s / (2π) = sqrt(0.25 kg/k)

0.265 s^2/kg = 0.25 kg/k

k = 0.25 kg / 0.265 s^2

k = 0.943 N/m

Therefore, the spring constant is 0.943 N/m.

to learn more about kinetic energy click here:

brainly.com/question/22174271

#SPJ11

To determine whether the experimentalist's claim is valid, we can check if it satisfies the laws of thermodynamics, specifically the first and second laws of thermodynamics.

The first law of thermodynamics, also known as the law of conservation of energy, states that energy cannot be created or destroyed, only transferred or converted from one form to another.

The second law of thermodynamics states that in any energy transfer or conversion process, the total entropy of the system and its surroundings always increases.

We can use the following formula to calculate the efficiency of the heat engine:

Efficiency = (Work output / Heat input) x 100%

Efficiency = (160 Btu / 300 Btu) x 100%

Efficiency = 53.3%

Now, let's check if this satisfies the laws of thermodynamics:

First law of thermodynamics:

The heat engine receives 300 Btu of heat from the source and converts 160 Btu of it to work. The remaining 140 Btu is rejected as waste heat to the sink. This satisfies the first law of thermodynamics as the total amount of energy input (300 Btu) is equal to the total amount of energy output (160 Btu of work + 140 Btu of waste heat).

Learn more about   engine    here:

https://brainly.com/question/11986002

#SPJ11

One minute before impact, the missiles are 50 miles apart.

To solve this problem, first, determine the combined speed of the missiles.

The first missile travels at 2000 mph, while the second missile travels at 1000 mph, totaling 3000 mph.

Since there are 60 minutes in an hour, in one minute, the missiles will cover a distance of:

3000 mph / 60 = 50 miles.

Since they are initially 500 miles apart, one minute before impact, they will be:

500 - 50 = 450 miles apart.

However, since they travel towards each other, they will cover 450 miles in the last minute, leaving them 50 miles apart one minute before impact.

For more such questions on missiles, click on:

https://brainly.com/question/14595776

#SPJ11

To calculate the spring force required to hold the valve closed under a pressure of 3.5 megapascals, we need to use the formula for pressure, which is Force divided by area.

The area of the piston is πr^2, where r is the radius of the piston (which is half of the diameter given in the question). Therefore, the area of the piston is π(15 mm)^2 = 706.9 mm^2.

Now we can calculate the force required to hold the valve closed:

Force = Pressure x Area
Force = 3.5 MPa x 706.9 mm^2
Force = 2470 N

So, the spring force required to hold the valve closed under a pressure of 3.5 megapascals is 2470 Newtons. This force must be applied to the outside of the piston to counteract the pressure inside the tank and prevent the valve from opening.

To learn more about pressure visit;

https://brainly.com/question/12971272

#SPJ11

Answer:3.500kg per m/s

Explanation: kinetic energy = 0.5× mass × velocity^2

2.14×1021=2184.94 is mass

17,900 is velocity

so,

kinetic energy = 0..5× mass × velocity^2

= 0.5×2184.94×17,900^2

= 3.500kg per m/s

The average induced emf in the coil during one inhalation is proportional to the value of B, which depends on the specifics of the experiment and is not given in the problem statement.

The average induced emf in a coil is given by the formula:

emf = -N(dΦ/dt)

here N is the number of turns in the coil, Φ is the magnetic flux through the coil, and t is time.

In this case, the area of the coil increases by 42 [tex]cm^2[/tex] during 2.0 s, which means the change in area is:

dA/dt = (42 cm) / (2.0 s) = 21 cm/s

The magnetic flux through the coil is given by:

Φ = BA

Therefore, the change in magnetic flux is:

dΦ/dt = B(dA/dt)

The negative sign in the formula for emf indicates that the emf opposes the change in magnetic flux. Therefore, we can write:

emf = -N B (dA/dt)

emf = -260 × B × (21 cm/s)

The unit of emf is volts (V).

emf = -260 × B × [tex](21 * 10^{-4} m^2/s)[/tex]

Therefore, the average induced emf in the coil during one inhalation is proportional to the value of B, which depends on the specifics of the experiment and is not given in the problem statement.

Learn more about induced emf Visit: brainly.com/question/13744192

#SPJ4

The average induced electromotive force in the coil is given by Faraday's law, which depends on the rate of change of magnetic flux through the coil. In this case, the induced EMF is proportional to the strength of the magnetic field and opposes the change in flux.

When a coil of wire moves through a magnetic field, an electromotive force (EMF) is induced in the coil. The magnitude of this EMF depends on the rate at which the coil moves through the field and the strength of the field.

In the scenario described, a 260-turn coil with an initial area of A1 is stretched by an amount of [tex]$\Delta A = 42 \textrm{ cm}^2$[/tex] during a time interval of Δt = 2.0 s. Assuming that the magnetic field remains constant during this process, the average induced EMF in the coil can be calculated using Faraday's law:

EMF = -NΔΦ/Δt,

where N is the number of turns in the coil, ΔΦ is the change in magnetic flux through the coil, and Δt is the time interval over which the change occurs.

The change in magnetic flux can be calculated as ΔΦ = BΔA, where B is the strength of the magnetic field. Therefore, we can write:

[tex]$\textrm{EMF} = -\frac{NAB}{\Delta t} \cdot \frac{\Delta A}{A_1}$[/tex],

where AB is the initial area of the coil.

Plugging in the given values, we get:

[tex]$\textrm{EMF} = -\frac{260 \cdot \pi \cdot (0.08 \textrm{ m})^2 \cdot \textrm{B}}{2.0 \textrm{ s}} \cdot \frac{0.042 \textrm{ m}^2}{\pi \cdot (0.08 \textrm{ m})^2}$[/tex]

Simplifying and canceling units, we get:

EMF = - 0.027 B V

Therefore, the average induced EMF in the coil depends only on the strength of the magnetic field and is proportional to it. The negative sign indicates that the induced current will flow in a direction that opposes the change in magnetic flux.

To learn more about electromotive force

https://brainly.com/question/31644820

#SPJ4