Change in energy of the metal was -1447 Joules. Negative indicating loss of energy.
To find the change in energy of the metal, we need to use the principle of conservation of energy. We know that the heat gained by the metal is equal to the heat lost by the water and the calorimeter. So, we can set up an equation as follows:
Heat gained by metal = Heat lost by water + Heat lost by calorimeter
Let's call the change in energy of the metal "Q". We know that the heat gained by the calorimeter was 167 J, and the heat gained by the water was 1280 J. Therefore, the heat lost by both the water and the calorimeter was:
Heat lost by water + Heat lost by calorimeter = 167 J + 1280 J = 1447 J
Now we can set up our equation:
Q = -1447 J
The negative sign indicates that the metal lost energy. Therefore, the change in energy of the metal was -1447 Joules.
To know more about Principle of energy conservation:
https://brainly.com/question/24772394
#SPJ11
We added DMF during the gravity filtration of the products after we used magnesium sulfate to dry the products. What would the consequence of omitting this step be
Dimethylformamide (DMF) is a commonly used solvent in chemical reactions and processes. In your specific case, DMF was added during the gravity filtration of the products after using magnesium sulfate to dry them. DMF serves as a drying agent and helps to remove any remaining traces of water from the products. Omitting this step could lead to a number of consequences.
Firstly, the presence of water in the final product can cause it to degrade faster over time. This is because water can promote chemical reactions that can alter the product's composition and properties. The product may also become contaminated by microorganisms that thrive in wet conditions.
Secondly, the absence of DMF could also result in a lower yield of the final product. This is because DMF helps to remove any remaining water and other impurities that can affect the purity of the product. In the absence of DMF, these impurities can remain in the final product, leading to a lower yield and a lower quality product.
Lastly, omitting the use of DMF could affect the reproducibility of the results. In chemical reactions, it is important to maintain the same conditions and procedures to ensure that the results are consistent and reproducible. If DMF is omitted, this could affect the results of subsequent experiments, making it difficult to draw meaningful conclusions.
In conclusion, the consequences of omitting DMF during the gravity filtration of products after using magnesium sulfate to dry them could result in a degraded product, lower yield, and less reproducible results. It is therefore important to include this step in your procedure to ensure that the final product is of high quality and purity.
To know more Dimethylformamide (DMF) click this link-
brainly.com/question/29754863
#SPJ11
If you have 6.3 moles of Fluorine gas(F2) how many grams of fluorine would you have if the fluorine gas was contained in a 3 liter jar
If you have 6.3 moles of fluorine gas (F2) in a 3-liter jar, you can use the ideal gas law to determine the mass of fluorine present. The ideal gas law relates the pressure, volume, temperature, and number of moles of a gas to its physical properties. Rearranging the ideal gas law to solve for the mass of the gas, we have:
Mass = Number of moles x Molar mass
The molar mass of fluorine is approximately 38 g/mol. Therefore, 6.3 moles of fluorine gas would have a mass of:
Mass = 6.3 moles x 38 g/mol = 239.4 g
So, if you have 6.3 moles of fluorine gas in a 3-liter jar, you would have approximately 239.4 grams of fluorine. It is important to note that fluorine gas is extremely reactive and dangerous, so proper safety precautions should be taken when handling it.
Hi! To find the mass of fluorine in grams, we can follow these steps:
1. Determine the molar mass of fluorine gas (F2). Fluorine has a molar mass of 19 g/mol, so F2 has a molar mass of 38 g/mol (19 x 2).
2. Use the given moles of fluorine gas to find the mass in grams. We are given 6.3 moles of F2. To convert this to grams, we multiply by the molar mass of F2:
6.3 moles * 38 g/mol = 239.4 grams
So, you have 239.4 grams of fluorine gas contained in a 3-liter jar.
To know more about fluorine visit:
https://brainly.com/question/1940697
#SPJ11
What volume of carbon dioxide gas is produced at STP when 125 mL of a 0.10 M nitric acid solution reacts with excess calcium carbonate
The volume of carbon dioxide gas produced at STP when 125 mL of a 0.10 M nitric acid solution reacts with excess calcium carbonate is 140 mL.
The balanced chemical equation for the reaction between nitric acid and calcium carbonate is:
2HNO3(aq) + CaCO3(s) → Ca(NO3)2(aq) + CO2(g) + H2O(l)
From the equation, we can see that 2 moles of nitric acid react with 1 mole of calcium carbonate to produce 1 mole of carbon dioxide gas.
To find the number of moles of nitric acid in 125 mL of a 0.10 M solution, we can use the formula:
moles = concentration x volume (in liters)
Converting the volume of the solution to liters:
125 mL = 0.125 L
Substituting the values into the formula:
moles of nitric acid = 0.10 M x 0.125 L = 0.0125 moles
Since 2 moles of nitric acid produce 1 mole of carbon dioxide gas, we can calculate the moles of carbon dioxide produced as:
moles of CO2 = 0.0125 moles of HNO3 ÷ 2 = 0.00625 moles
At STP (Standard Temperature and Pressure), 1 mole of any gas occupies 22.4 L. Therefore, the volume of carbon dioxide gas produced at STP can be calculated as:
volume of CO2 = moles of CO2 x 22.4 L/mol = 0.00625 mol x 22.4 L/mol = 0.14 L or 140 mL (rounded to 2 significant figures)
For more such questions on carbon dioxide
https://brainly.com/question/25385913
#SPJ11
A certain radioactive isotope has a half-life of 4.34 minutes. If we initially have 1536 grams of this substance, how many half-lives will pass until 6 grams remain
It takes 11 half-lives for 6 grams of the radioactive isotope to remain.
We can use the formula[tex]N = N_o(1/2)^{(t/T)[/tex], where N is the final amount, N₀ is the initial amount, t is the time elapsed, and T is the half-life of the substance.
In this case, N₀ = 1536 grams and N = 6 grams. We can solve for t by taking the natural logarithm of both sides:
ln(N/N₀) = -(t/T) ln(1/2)
t/T = -ln(N/N₀) / ln(1/2)
t = -ln(N/N₀) / ln(1/2) * T
t = -ln(6/1536) / ln(1/2) * 4.34 minutes
t ≈ 23.63 minutes
Since each half-life is 4.34 minutes, we can divide the total time elapsed by the half-life to find the number of half-lives:
23.63 minutes / 4.34 minutes per half-life ≈ 5.44 half-lives
Since we can't have a fraction of a half-life, we round up to 6 half-lives. Therefore, it takes 6 half-lives for the amount of the radioactive isotope to decrease from 1536 grams to 6 grams.
To know more about radioactive isotope, refer here:
https://brainly.com/question/28039996#
#SPJ11
If the enantiomeric excess of a mixture is 85 %, what are the percent compositions of the major and minor enantiomer
The percent compositions of the major and minor enantiomers are 15% and 85%, respectively.
Enantiomeric excess (ee) is a measure of the degree of excess of one enantiomer over the other in a mixture. It is defined as:
ee = (moles of major enantiomer - moles of minor enantiomer) / (moles of major enantiomer + moles of minor enantiomer) x 100%
If the ee is 85%, then we can write:
85% = (moles of major enantiomer - moles of minor enantiomer) / (moles of major enantiomer + moles of minor enantiomer) x 100%
We can simplify this equation by dividing both sides by 100% and multiplying by the denominator:
0.85 = (moles of major enantiomer - moles of minor enantiomer) / (moles of major enantiomer + moles of minor enantiomer)
We can rearrange this equation to solve for the moles of the major enantiomer:
0.85 (moles of major enantiomer + moles of minor enantiomer) = moles of major enantiomer - moles of minor enantiomer
0.85 moles of major enantiomer + 0.85 moles of minor enantiomer = moles of major enantiomer - moles of minor enantiomer
1.85 moles of minor enantiomer = 0.15 moles of major enantiomer
The percent composition of the major enantiomer is:
% major enantiomer = moles of major enantiomer / (moles of major enantiomer + moles of minor enantiomer) x 100%
% major enantiomer = 0.15 moles / (0.15 moles + 0.85 moles) x 100% = 15%
The percent composition of the minor enantiomer is:
% minor enantiomer = moles of minor enantiomer / (moles of major enantiomer + moles of minor enantiomer) x 100%
% minor enantiomer = 0.85 moles / (0.15 moles + 0.85 moles) x 100% = 85%
For more question on enantiomers click on
https://brainly.com/question/30626673
#SPJ11
An unknown compound has a percent composition as follows: 47.0% potassium, 14.5% carbon, and 38.5% oxygen. Its molar mass is 166.22 g/mol. What is the molecular formula of this compound
The molecular formula of the compound is K₂C₂O₄ and the compound is potassium oxalate.
The number of atoms in each element is indicated in a molecular formula, which is a picture of a chemical complex. It is a succinct approach to explain a compound's chemical make-up. The number and type of atoms in a molecule are indicated by the molecular formula, but the arrangement or bonding of those atoms is not disclosed.
Molar masses (g/mol): K = 39.1, C = 12.0, O = 16.0
In 1 mole of the compound:
No. of moles of K = (166.22 g) × 47% / (39.1 g/mol) = 2
No. of moles of C = (166.22 g) × 14.5% / (12.0 g/mol) = 2
No. of moles of O = (166.22 g) × 38.5% / (16.0 g/mol) = 4
Therefore, the molecular formula of the compound is K₂C₂O₄.
To know more about molecular formula click on below link :
https://brainly.com/question/28647690#
#SPJ11
how much energy in joules does it take to raise the temperature of 1.5kg of aluminum from 20c to 40c
The amount of energy in joules does it take to raise the temperature of 1.5kg of aluminum from 20°C to 40°C is 26.7 Joules.
A physical characteristic of matter is its capacity for heat or thermal energy. It may be described as the quantity of heat that must be applied to an item in order to cause a unit change in the object's overall temperature. Joule per kelvin is the heat capacity unit used in the SI. A broad attribute is heat capacity.
The mass of aluminum is, m = 1.5 kg
Temperature is to be raised from 20 to 40°C, hence the temperature gradient is, dT = (40-20)°C = 20°C
Heat capacity of aluminum is, Cp = 0.89 kJ/kg°C
Hence, the required amount of heat should be, Q = m × Cp × dT
Q = 1.5 × 0.89 × 20
Q = 30 × 0.89
Q = 26.7 Joules
Therefore, the amount of energy required to raise the temperature of aluminium is 26.7 Joules.
Learn more about Amount of energy:
https://brainly.com/question/30083274
#SPJ4
Select the best description of the major product(s) formed from the following reaction. 1. Hg(OAc)2, H20 2. NaBH4, NaOH А. а single achiral compound B. a pair of enantiomers С. а D. the R enantiomer E. the S enantiomer pair of diastereomers F. two constitutional isomers E ОА ОВ ос O F Enter Your Answer: D Incorrect Select the correct relationship between the following two structures. A. conformational isomers B constitutional isomers C. diastereomers D. enantiomers E. identical structures Enter Your Answer: E A C C Incorrect ШШ
The best description of the major product(s) formed from the given reaction using Hg(OAc)2 and H2O, followed by NaBH4 and NaOH is a pair of enantiomers (option B).
Enantiomers are non-superimposable mirror images of each other, meaning they have the same molecular formula and connectivity but differ in their spatial arrangement in a way that makes them chiral. The reaction involves an asymmetric carbon center, leading to the formation of these two stereoisomers.
As for the relationship between the two structures mentioned, since the provided information is insufficient to identify specific structures, it is impossible to accurately determine their relationship. However, the given options are conformational isomers, constitutional isomers, diastereomers, enantiomers, and identical structures. Each of these terms describes a different type of isomer or relationship between molecules based on their connectivity and spatial arrangement.
To know more about enantiomers click this link-
brainly.com/question/30401546
#SPJ11
Nonmetals gain electrons under certain conditions to attain a noble gas electron configuration. How many electrons must be gained by the element oxygen (O) to attain noble gas electron configuration
The noble gas electron configuration for oxygen (O) is the same as that of neon (Ne), which has 10 electrons. Oxygen has 8 electrons, so it needs to gain 2 electrons to attain a noble gas electron configuration.
How to achieve noble gas electron configuration by elements?To determine how many electrons must be gained by the element oxygen (O) to attain a noble gas electron configuration, follow these steps:
1. Identify the atomic number of oxygen. Oxygen's atomic number is 8.
2. Find the nearest noble gas to oxygen. The nearest noble gas is neon (Ne), with an atomic number of 10.
3. Compare the electron configurations. Oxygen (O) has an electron configuration of 1s² 2s² 2p⁴, while neon (Ne) has an electron configuration of 1s² 2s² 2p⁶.
4. Determine the difference in electrons. To achieve the noble gas electron configuration of neon, oxygen needs to gain 2 more electrons in the 2p orbital.
Thus, Oxygen (O) must gain 2 electrons to attain a noble gas electron configuration like neon (Ne).
To know more about Noble Gas electron configuration:
https://brainly.com/question/29566365
#SPJ11
Experiment 5 Formation and Naming of lonic Compounds QUESTIONS PRE LAB 1. List two visible changes that may occur in this experiment when a cation and anion are mixed together. 2. Which abbreviation will you use to indicate there was no visible change when a cation and anion were mixed? 3. How many drops of anion are placed into a well in the well plate? 4. List the cations used in this experiment.
In the given Experiment 5, the Formation and Naming of Ionic Compounds, the focus is on observing the changes that occur when cations and anions are mixed together. Two visible changes that may occur during this experiment include the formation of a precipitate and a change in color. A precipitate forms when the cation and anion combine to create an insoluble solid. A color change indicates a chemical reaction has taken place between the two ions.
To indicate that no visible change occurred when a cation and anion were mixed, the abbreviation "NC" (no change) will be used. This helps differentiate between reactions that had visible changes and those that did not.
In this experiment, a specific number of drops of anion will be placed into a well on the well plate. Generally, this number will be given in the procedure, and you should follow the instructions provided in your lab manual or by your instructor.
The cations used in this experiment may vary, but some common examples include: sodium, calcium, magnesium , and copper . These cations will be mixed with various anions to form different ionic compounds, allowing you to observe and identify the reactions that take place.
Learn more about precipitation here:
https://brainly.com/question/29762381
#SPJ11
Which form of electromagnetic radiation is absorbed by carbon dioxide and water vapor in our atmosphere
The form of electromagnetic radiation Carbon dioxide and water vapor in our atmosphere absorb infrared radiation.
This includes a portion of the electromagnetic spectrum known as the "atmospheric window," which includes wavelengths between 8 and 14 micrometers. The absorption of infrared radiation by these greenhouse gases in the atmosphere contributes to the warming of the Earth's surface, known as the greenhouse effect.
The greenhouse effect is a natural phenomenon that helps regulate the Earth's temperature and is necessary for life to exist. However, human activities that increase the concentration of greenhouse gases in the atmosphere, such as burning fossil fuels, are enhancing the greenhouse effect and leading to global warming.
Learn more about electromagnetic spectrum here:
https://brainly.com/question/15576247
#SPJ11
Cobalt 60 is a radioactive source with a halflife of about 5 years. After how many years will the activity of a new sample of cobalt 60 be decreased to 1 8 its original value
The activity of a new sample of cobalt 60 will be decreased to 1/8 of its original value after 15 years
To find the number of years it takes for the activity of a new sample of Cobalt-60 to decrease to 1/8 of its original value, we need to consider its half-life, which is 5 years.
Since the activity decreases by half with each half-life period, we need to find how many half-life periods it takes to reach 1/8 of the initial activity:
1/2 * 1/2 * 1/2 = 1/8
This equation shows that it takes 3 half-life periods to reach 1/8 of the initial activity. So, for Cobalt-60 with a 5-year half-life:
3 half-life periods * 5 years per half-life = 15 years
Therefore, it will take 15 years for the activity of a new sample of Cobalt-60 to decrease to 1/8 of its original value.
To know more about cobalt 60 click on below link :
https://brainly.com/question/9851418#
#SPJ11
A 4.09 g sample of a laboratory solution contains 1.46 g of acid. What is the concentration of the solution as a mass percentage
If a 4.09 g sample of a laboratory solution contains 1.46 g of acid, the concentration of the solution as a mass percentage is 35.7%
To find the concentration of the solution as a mass percentage, we need to divide the mass of the acid by the mass of the entire solution and then multiply by 100.
Mass percentage = (mass of acid / mass of solution) x 100
Mass of acid = 1.46 g
Mass of solution = 4.09 g
Mass percentage = (1.46 g / 4.09 g) x 100
Mass percentage = 35.7%
Therefore, the concentration of the solution as a mass percentage is 35.7%.
More on concentration: https://brainly.com/question/3595285
#SPJ11
If water is added to the saturated solution and equilibrium is re-established, what change occurs in the amount (moles) of dissolved sucrose
When water is added to a saturated sucrose solution, the system adjusts to the change by dissolving more sucrose to maintain equilibrium. Consequently, the amount of dissolved sucrose (moles) increases until a new equilibrium is established.
When water is added to a saturated solution containing sucrose, the equilibrium is disturbed, and a change occurs in the amount of dissolved sucrose. This process can be understood in terms of Le Chatelier's Principle, which states that when a change is made to a system in equilibrium, the system will shift to counteract that change.
In this case, adding water increases the solvent volume, thus decreasing the concentration of the sucrose solution. To counteract this change, the system shifts towards dissolving more sucrose to maintain equilibrium. As a result, the amount (moles) of dissolved sucrose increases.
This increase in dissolved sucrose continues until the solution becomes saturated again, at which point the dissolution and crystallization processes occur at equal rates. The new equilibrium will have a higher number of moles of dissolved sucrose due to the increased volume of solvent.
Know more about equilibrium here:
https://brainly.com/question/517289
#SPJ11
What is the empirical formula for a compound which contains 0.0134 grams of Iron, 0.00769 grams of Sulfur and 0.0115 grams of Oxygen
The empirical formula for a compound that contains 0.0134 grams of Iron, 0.00769 grams of Sulfur, and 0.0115 grams of Oxygen is FeSO3.
Convert the given masses of each element to moles using their molar masses:
Molar mass of Fe = 55.845 g/mol
Molar mass of S = 32.06 g/mol
Molar mass of O = 15.999 g/mol
Moles of Fe = 0.0134 g / 55.845 g/mol = 0.00024 mol
Moles of S = 0.00769 g / 32.06 g/mol = 0.00024 mol
Moles of O = 0.0115 g / 15.999 g/mol = 0.00072 mol
Calculate the mole ratio of the elements in the compound by dividing the number of moles of each element by the smallest number of moles:
Moles of Fe = 0.00024 mol / 0.00024 mol = 1
Moles of S = 0.00024 mol / 0.00024 mol = 1
Moles of O = 0.00072 mol / 0.00024 mol = 3
The empirical formula of the compound is FeSO3, indicating that the compound contains one atom of Fe, one atom of S, and three atoms of O.
To learn more about the empirical formula:
https://brainly.com/question/14044066
#spj4
The compound aluminum chloride is a strong electrolyte. Write the reaction when solid aluminum chloride is put into water.
Answer:
produces steamy clouds of hydrogen chloride gas.
Explanation:
Aluminum chloride reacts dramatically with water. A drop of water placed onto solid aluminum chloride produces steamy clouds of hydrogen chloride gas. Solid aluminum chloride in an excess of water still splutters, but instead an acidic solution is formed.
Evaluate your experimental results and briefly explain why they do or do not verify Charles's Law(1) temperature of water in the boiling-water bath, ____∘ C (2) volume of water pulled into the flask, mL (3) temperature of water in the ice-water bath,∘C (4) volume of flask, mL (5) barometric pressure, ____ (units)
(6) barometric pressure, torr (7) pressure of dry, cold air, torr (8) volume of wet, cold air, mL (9) volume of dry, cold air, mL (10) temperature of water in the boiling-water bath, K (11) temperature of water in the ice-water bath, K
(12) V/T for hot, dry air, mL K-1(13) V/T for cold, dry air, mL K −1
Based on your experimental results, you can evaluate if they verify Charles's Law by comparing the relationship between the volume (V) and temperature (T) of the gases involved. According to Charles's Law, V1/T1 = V2/T2, where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.
1) Record the temperature of water in the boiling-water bath in degrees Celsius (ºC).
2) Record the volume of water pulled into the flask in milliliters (mL).
3) Record the temperature of water in the ice-water bath in degrees Celsius (ºC).
4) Record the volume of the flask in milliliters (mL).
5) Record the barometric pressure and its units.
6) Convert the barometric pressure to torr.
7) Calculate the pressure of dry, cold air in torr.
8) Record the volume of wet, cold air in milliliters (mL).
9) Calculate the volume of dry, cold air in milliliters (mL).
10) Convert the temperature of water in the boiling-water bath to Kelvin (K).
11) Convert the temperature of water in the ice-water bath to Kelvin (K).
12) Calculate V/T for hot, dry air in mL K-1.
13) Calculate V/T for cold, dry air in mL K-1.
After calculating the values for steps 12 and 13, compare them. If they are approximately equal, your results verify Charles's Law. If not, there could be experimental errors or inaccuracies in your measurements that could have affected your results.
To learn more about Volume Here:
https://brainly.com/question/25252629
#SPJ11
what is the concentration of magnesium ions when the concentration of hydroxide is high enough to precipitate out both magnesium and calcium ions?
When the concentration of hydroxide ions is high enough to precipitate out both magnesium and calcium ions, the concentration of magnesium ions will depend on several factors.
Firstly, the initial concentration of magnesium ions in the solution will play a role. If the initial concentration is high, there will still be a significant amount of magnesium ions left in solution after precipitation. Conversely, if the initial concentration is low, most of the magnesium ions will have precipitated out.
Additionally, the pH of the solution will also affect the concentration of magnesium ions. If the pH is too high, the magnesium ions may form insoluble hydroxide complexes, further reducing their concentration. The temperature of the solution may also have an effect, as precipitation reactions may be affected by temperature changes.
Overall, the concentration of magnesium ions when both magnesium and calcium ions are precipitated out by high concentrations of hydroxide ions will depend on several factors, including the initial concentration of magnesium ions, the pH of the solution, and the temperature.
To know more about magnesium ions click here:
https://brainly.com/question/1698012
#SPJ11
What is the total gas pressure in a sealed flask that contains oxygen at a partial pressure of 0.41 atm and water vapor at a partial pressure of 0.58 atm
The total gas pressure in a sealed flask that contains oxygen at a partial pressure of 0.41 atm and water vapor at a partial pressure of 0.58 atm is 0.99 atm.
To find the total gas pressure in the sealed flask, we need to add together the partial pressures of all the gases present. According to Dalton's law of partial pressures, the total pressure of a mixture of gases is equal to the sum of the partial pressures of each gas in the mixture.
So, the total pressure P of the gas mixture is:
P = P_O₂ + P_H₂O
where P_O₂ is the partial pressure of oxygen and P_H₂O is the partial pressure of water vapor.
Plugging in the given values, we get:
P = 0.41 atm + 0.58 atm = 0.99 atm
Therefore, the total gas pressure in the sealed flask is 0.99 atm.
To know more about the total gas pressure refer here :
https://brainly.com/question/29816871#
#SPJ11
A piston has an external pressure of 5.00 atm . How much work has been done in joules if the cylinder goes from a volume of 0.130 liters to 0.610 liters
The work done by the piston on the gas is -2400 Joules. Note that the negative sign indicates that work was done on the gas by the external pressure (since the volume increased).
The work done by the piston on the gas can be calculated using the formula:
W = -Pext * ΔV
where W is the work done, Pext is the external pressure, and ΔV is the change in volume of the gas.
Converting the initial and final volumes from liters to cubic meters (1 L = 0.001 m^3), we get:
Vi = 0.130 L = 0.130 x 0.001 m^3 = 0.00013 m^3
Vf = 0.610 L = 0.610 x 0.001 m^3 = 0.00061 m^3
The change in volume is then:
ΔV = Vf - Vi = 0.00061 m^3 - 0.00013 m^3 = 0.00048 m^3
Substituting the given values into the formula, we get:
W = -Pext * ΔV = -(5.00 atm) * (0.00048 m^3) = -2400 J
Therefore, the work done by the piston on the gas is -2400 Joules.
To know more about External pressure please visit
https://brainly.com/question/31802755
#SPJ11
An alkyne with the molecular formula C6H10 was treated with ozone followed by water, and a single carboxylic acid was isolated as the only product. Draw the structure of the starting alkyne and the product of ozonolysis.
The structure of the starting alkyne and the product of ozonolysis.
Starting Alkyne: H-C≡C-C-C-C-C-H
Product of Ozonolysis: H-COOH-C-C-C-C-H
What is alkyne ?Alkyne is an organic compound composed of a carbon and hydrogen atoms, with at least one carbon-carbon triple bond. It is the simplest form of unsaturated hydrocarbon and is the most reactive of all hydrocarbons. Alkynes are highly reactive molecules and can be used to form a variety of organic compounds. They are important in the pharmaceutical and biotechnology industries as well as in the production of synthetic rubber, plastics, and textiles. Alkynes can also be used as fuel, lubricants, and solvents. Alkynes are also a source of important industrial chemicals such as acetylene, ethylene, and propylene. Alkynes are also used in the production of fragrances and dyes. Alkynes can be classified according to the number of carbon-carbon triple bonds that they contain. The simplest alkyne is ethyne (acetylene), which has two carbon atoms and one triple bond. Other examples of alkynes are propyne (methylacetylene), butyne (but-1-yne), and pent-1-yne. Alkynes can be further classified according to the number of hydrogen atoms attached to the carbon atoms.
To learn more about alkyne
https://brainly.com/question/22933069
#SPJ4
what is the identity of the substance that has undergone net reduction after the reaction 1 is complete? a.nadp b.fad c.h2o2 d.o2
In order to answer this question, we need to understand the process of net reduction. Net reduction occurs when a molecule gains electrons during a chemical reaction. The molecule that is reduced becomes more negative and has a higher energy state. Conversely, the molecule that is oxidized loses electrons and becomes more positive and lower in energy.
In the reaction 1 that is mentioned in the question, it is not clear which substances are involved or what type of reaction is occurring. Therefore, we cannot determine the identity of the substance that has undergone net reduction after the reaction is complete.
However, we can look at some common examples of reactions that involve net reduction. One example is the reduction of NADP to NADPH in photosynthesis. During this reaction, light energy is used to transfer electrons from water to NADP, resulting in the net reduction of NADP to NADPH. Another example is the reduction of oxygen to water during cellular respiration. In this reaction, electrons are transferred from glucose to oxygen, resulting in the net reduction of oxygen to water.
In summary, the identity of the substance that undergoes net reduction in a chemical reaction depends on the specific reaction that is occurring. Without more information about the reaction mentioned in the question, we cannot determine the identity of the substance that has undergone net reduction.
To know more net reduction click this link-
brainly.com/question/14698511
# SPJ11
The work function for Ni is 5.15 eV and the work function for Mo is 4.2 eV. When Ni and Mo are brought together and in electrical contact with each other, the value of the contact potential developed between the two metals is
The contact potential developed between Ni and Mo when brought together and in electrical contact with each other is 0.95 eV.
When two metals are brought in electrical contact, electrons flow from the metal with lower work function to the metal with higher work function, until the Fermi levels of the two metals are aligned. The contact potential developed between the two metals is equal to the difference between their work functions.
In this case, Ni has a higher work function than Mo (5.15 eV vs. 4.2 eV). Therefore, electrons will flow from Mo to Ni until their Fermi levels align. The contact potential developed between the two metals will be equal to the difference between their work functions:
Contact potential = Work function of Ni - Work function of Mo
Contact potential = 5.15 eV - 4.2 eV
Contact potential = 0.95 eV
Therefore, the value of the contact potential developed between Ni and Mo when brought together and in electrical contact with each other is 0.95 eV.
Learn more about Fermi levels here:
https://brainly.com/question/14544528
#SPJ11
Answer the question on the picture please.
The right answer is :
Ca(NO3)2 salt
HCN weak acid
Ca(OH)2 strong base
Li2SO4 salt
H2SO4 strong acid
H2SO3 weak acid
HF weak acid
CeH12O6 molecule
glucose molecule
NH3 weak base
A salt is a substance created when an acid and a base are neutralised. Ca(NO3)2 and Li2SO4 are categorised as salts in this list.
A base is a chemical that receives hydrogen ions (H+) whereas an acid is a compound that contributes hydrogen ions (H+) in a solution. HCN, H2SO4, H2SO3, and HF are acids on this list, whereas Ca(OH)2 and NH3 are bases.
Strong acids and bases fully dissociate in solution, which means that all of the molecules of the acid or base separate into their individual ions. A weak acid or base, on the other hand, only partially dissociates in solution. HCN, H2SO3, HF, and NH3 are weak acids, whereas Ca(OH)2 and H2SO4 are strong acids and bases, respectively.
Learn more about strong acid at:
https://brainly.com/question/31143763
#SPJ1
The solubility of substances whose curves show greater (steeper) slopes are ________ (more/less) affected by temperature changes than those that have more gradual slopes 2) How many grams of sodium nitrate will dissolve in 100g of water at 20oC
1) The solubility of substances whose curves show greater (steeper) slopes are MORE affected by temperature changes than those that have more gradual slopes. This means that for substances with steep slopes, their solubility will change more significantly with changes in temperature compared to substances with gentle slopes.
2) According to the solubility curve of sodium nitrate, approximately 87 grams of sodium nitrate will dissolve in 100g of water at 20oC.
Solubility is the ability of a substance, known as the solute, to dissolve in a solvent to form a homogeneous mixture known as a solution. The solubility of a substance depends on various factors, such as the chemical nature of the solute and solvent, temperature, pressure, and the presence of other substances in the solution.Temperature also affects the solubility of a substance. In general, the solubility of a solid solute in a liquid solvent increases with increasing temperature, while the solubility of a gas solute in a liquid solvent decreases with increasing temperature. This is because increasing temperature increases the kinetic energy of the molecules, making them more likely to overcome the intermolecular forces between the solute and solvent molecules.
To know more about solubility visit:
https://brainly.com/question/2289344
#SPJ11
If you started with 20.0 g of a radioisotope and waited for 3 half-lives to pass, then how much would remain
If you started with 20.0 g of a radioisotope and waited for 3 half-lives to pass, then 2.5 g would remain
The amount of a radioactive substance remaining after a certain period of time can be calculated using the half-life of the substance. The half-life is the time it takes for half of the original amount of the substance to decay.
In this case, we are given that 3 half-lives have passed. Therefore, the original amount of the substance has been reduced by a factor of 2³, or 8. This means that only 1/8th of the original amount remains.
To calculate the amount remaining, we can use the following formula:
Amount remaining = (original amount) x (1/2)^(number of half-lives)
Plugging in the values given, we get:
Amount remaining = 20.0 g x (1/2)^3
Amount remaining = 20.0 g x 0.125
Amount remaining = 2.5 g
Therefore, after 3 half-lives have passed, only 2.5 g of the radioisotope would remain.
To know more about radioisotope click on below link :
https://brainly.com/question/16856646#
#SPJ11
An oxygen atom with three missing electrons is released near the Van de Graaff generator. What is its kinetic energy in keV at this distance
The kinetic energy of the oxygen atom with three missing electrons near the Van de Graaff generator cannot be determined without knowing the distance from the generator, the charge on the generator, and other specific conditions.
The kinetic energy (KE) of the oxygen atom can be calculated using the formula KE = qV, where q is the charge of the ion and V is the potential difference experienced by the ion. In this case, the oxygen atom is missing three electrons, so it has a charge of +3e (where e is the elementary charge, 1.6 x 10^-19 C). To find the kinetic energy in keV, we need to know the potential difference (V) the oxygen ion experiences near the Van de Graaff generator.
This value depends on the specific conditions of the experiment, such as the distance from the generator and the charge on the generator. Once V is known, the kinetic energy in joules can be calculated and then converted to keV by dividing by the conversion factor, 1.6 x 10^-16 J/keV.
Learn more about electrons here:
https://brainly.com/question/1255220
#SPJ11
If the concentration of Sn2 in the cathode compartment is 1.30 M and the cell generates an emf of 0.21 V , what is the concentration of Pb2 in the anode compartment
The concentration of Pb2+ in the anode compartment is 0.096 M(by using Nernst equation).
To solve this problem, we can use the Nernst equation which relates the cell potential (Ecell) to the standard cell potential (E°cell), the concentration of the reactants and products, and the gas constant (R) and the Faraday constant (F). The Nernst equation is given as follows:
Ecell = E°cell - (RT/nF) ln(Q)
where:
R = 8.314 J/mol·K (gas constant)
T = temperature in Kelvin
n = number of electrons transferred in the balanced redox equation
F = 96,485 C/mol (Faraday constant)
Q = reaction quotient
In this case, we have a redox reaction between Sn2+ and Pb2+ ions:
Pb(s) + Sn2+(aq) → Pb2+(aq) + Sn(s)
The standard cell potential for this reaction is given as:
E°cell = +0.14 V
The reaction involves the transfer of 2 electrons, so n = 2.
At equilibrium, the reaction quotient (Q) is equal to the ratio of the product concentrations to the reactant concentrations, each raised to their stoichiometric coefficients:
Q = [Pb2+]/[Sn2+]
We are given that the concentration of Sn2+ in the cathode compartment is 1.30 M. Let x be the concentration of Pb2+ in the anode compartment. Then, the concentration of Sn2+ in the anode compartment is also x, since the two compartments are connected by a salt bridge and the total amount of Sn2+ and Pb2+ ions in the cell is constant.
Substituting the given and unknown values into the Nernst equation, we get:
0.21 V = 0.14 V - (8.314 J/mol·K × 298 K / (2 × 96,485 C/mol)) ln(x/1.30)
Solving for x, we get:
x = 0.096 M
Therefore, the concentration of Pb2+ in the anode compartment is 0.096 M.
To know more about Nernst equation, please click on:
https://brainly.com/question/31593791
#SPJ11
The shape of a protein molecule is determined completely by Group of answer choices disulfide bridges the sequence of nucleotides in the cahin the sequence of amino acids in the chain. the sequence of ethylenes in the chain dispersion forces hydrogen bonding dipole-dipole forces ion-dipole attractions
The shape of a protein molecule is completely determined by the sequence of amino acids in the chain, as this sequence influences how the polypeptide chains fold and interact with each other.
1. Proteins are made up of amino acids, which are the building blocks of these molecules.
2. Amino acids are linked together by peptide bonds to form a linear chain called a polypeptide.
3. The sequence of amino acids in the polypeptide chain determines the primary structure of the protein.
4. Interactions between the amino acids, such as hydrogen bonding, disulfide bridges, and other forces, cause the polypeptide chain to fold into specific three-dimensional structures (secondary and tertiary structures).
5. The overall shape of the protein molecule (its quaternary structure) is determined by the combination and arrangement of these folded polypeptide chains.
For more information on shape of protein molecule referhttps://brainly.com/question/884935
#SPJ11
Sodium nitrate, an ionic compound, contains two oppositely charged ions; the compound is neutral. The formula for the cation is
Sodium nitrate, NaNO₃, is an ionic compound that contains two oppositely charged ions, the sodium cation (Na+) and the nitrate anion (NO₃⁻). In order for the compound to be neutral, the number of positive charges from the cation must balance out the number of negative charges from the anion.
Therefore, the formula for the cation in sodium nitrate is simply Na⁺. This is because sodium has a single valence electron in its outermost shell, which it easily donates to become a positively charged ion with a full outer shell.
The formula for the cation in sodium nitrate is Na+, and it is necessary for this cation to combine with the nitrate anion in order to form a neutral ionic compound.
The cation in the ionic compound sodium nitrate is Na⁺. Sodium nitrate is composed of the positively charged sodium cation (Na⁺) and the negatively charged nitrate anion (NO₃⁻). In this compound, the charges balance each other out, resulting in a neutral compound with the formula NaNO₃.
To know more about sodium nitrate, refer
https://brainly.com/question/29199898
#SPJ11