Engineering

It is okay to speed 7-10 mph over the posted speed limit.The police cannot write speeding tickets for that.
1 Answer
what's the difference between programming paradigms ?
2 Answers
(text 2. 36) A belt sander has a belt speed of 1500 ft/min. The coefficient of friction between the sander and the plywood being finished is 0. 2. If the downward (normal) force on the sander is 15 bf, determine (a) the power transmitted by the belt, in Btu/s and hp, and (b) the work done in one minute of sanding, in Btu
1 Answer
B. Directions: For items 9-15, sequence the steps involved on how to accomplishthe form in order to acquire materials. Write letters a lo h on the blank, 'a' being thefirst step, and so on. Do this in your Activity Notebook. 8. Write your name as requisitioner9. List the cost per unit and the total cost. 10. Write the number of required materials. 11. List the unit of materials to be requisitioned. 12. Secure the approval of the supply officer. 13. Enumerate the materials with their description. 1. 4. State the name of the project and date when you requested for materials.
1 Answer
The density of seawater at a free surface where the pressure is 98 kPa is approximately 1030 kg/m3. Taking the bulk modulus of elasticity of seawater to be 2. 34 109N/m2 and expressing variation of pressure with depth z as dp= rgdz determine the density and pressure at a depth of 2500 m. Disregard the effect of temperature. Recall that:(i) The bulk module of elasticity is defined as: (ii) Density is not assumed as constantin this problem
1 Answer
You are designing a highway to AASHTO guidelines on rolling terrain where the design speed will be 65 mi/h. At one section, a 1.25% grade and a -2.25% grade must be connected with an equal-tangent vertical curve. Determine the minimum length of curve to meet SSD requirements
1 Answer
1. What is a geotechnical investigation? What site investigation should take place before designing concrete foundations? What is a Geotechnical Report? Discuss in detail.
1 Answer
Type I motor units could best be described by which of the following in comparison to type II motor units
1 Answer
The angle grinder disc is turned at speeds that range from 5000 to rpm.
1 Answer
2. What is the maximum pressure that can be used when popping beads? OA. 25 psi OB. 35 psi LOC. 45 psi OD. 55 psi
1 Answer
A flexible pavement has a structural number of 6. If a 36,000 pound single axle is being loaded onto the pavement, how does it compare to a 18,000 pound single axle
1 Answer
Tech A says that dust masks should be used when painting. Tech B says that a respirator should be used when the TLV for a chemical is exceeded. Who is correct
1 Answer
What is the name given to the vehicles that warn motorists about oversized loads/vehicles?a) Pilot Carb) Advanced Carc) Trail Card) Leader Car
1 Answer
raw sugar cane is taken into a process to create sugar, which is essentially sucrose. the raw cane is approximately 16% sucrose, 63% water, and the rest fiber by mass. juice from the cane is extracted by passing the cane through a series of crushers. about 5% extra mass of water is added to the sugar cane prior to this step to help in the extraction process. the crushed cane and liquid juice is sent to a filter press that creates a cake that contains 4% of the weight of the cane juice, which has a composition similar to the overall non-fiber content of the raw cane. the filtrate is sent to an evaporator where enough water is evaporated to obtain a pale yellow juice that is 41% water. a
1 Answer
You are tasked with mapping a drive within the Command Prompt to a share named AlbaLonga on a server named Romulus. Which of the following is the correct syntax?A. net use //AlbaLonga./RomulusB. http://Romulus/AlbaLongaC. net use \\Romulus\AlbaLongaD. ipp://Romulus.com/AlbaLonga
1 Answer
A four-stroke diesel engine has a crankshaft gear with 45 teeth. How many teeth should the camshaft gear have if it is direct drive
1 Answer
_(what)_ cutting is a hand cutting technique that requires holding a torch at a slightangle and keeping the torch in contact with the workpiece as a cut is made.od to as
1 Answer
What does the following UML diagram entry mean? + setHeight(h : double) : void Select one: a. public void method with a parameter of data type double b. private method with no parameters that returns a double data type c. private field called setHeight that is a double data type d. Error - UML diagrams do not contain any symbols e. private data field called setHeight that is a double data type
1 Answer
Problem 2: The crane can be adjusted to any angle 0 90 and any extension 0 x 5m. For a suspended mass of 120 Kg, determine the moment developed at A as a function of x and . What values of both x and develop the maximum possible moment at A? Compute this moment. Neglect the size of the pulley at B.
1 Answer
Question 4: Princeton has a longstanding commitment to service and civic engagement. Tell us how your story intersects (or will intersect) with these ideals.
1 Answer
What size THHN feeder conductor is required for (two), single phase, 230 VAC, 7.5 HP motors, and (one) single phase, 115 VAC, 1.5 HP short time motor which is rated for 15-minute duty cycle and (one) single phase, 230 VAC, 0.75 HP motor
1 Answer
A(n) _________ is a set of permissions that is attached to an object.a. access control list (ACL)b. Subject Access Entity (SAE)c. object modifierd. security entry designator
1 Answer
What is geotechical investigation?
2 Answers
raw sugar cane is taken into a process to create sugar, which is essentially sucrose. the raw cane is approximately 16% sucrose, 63% water, and the rest fiber by mass. juice from the cane is extracted by passing the cane through a series of crushers. about 5% extra mass of water is added to the sugar cane prior to this step to help in the extraction process. the crushed cane and liquid juice is sent to a filter press that creates a cake that contains 4% of the weight of the cane juice, which has a composition similar to the overall non-fiber content of the raw cane. the filtrate is sent to an evaporator where enough water is evaporated to obtain a pale yellow juice that is 41% water. a
1 Answer