you have to choose more than one on this

Answer:

C) The magnitude and direction

Explanation:

Velocity is a vector quantity, meaning that it has both magnitude and direction.

For the momentum, we look at both the direction of the ball (negative, positive) and the magnitude of the velocity (5 m/s, 10 m/s) when figuring out what to use for "v" in p = mv.

The entropy at constant pressure is always greater than that at constant volume and the change in entropy for the two processes is greater for gas B.

According to the second law of thermodynamics, entropy in the isolated system always stays the same or increases.

Since gas does work in isobaric (constant pressure) change processes, the entropy at constant pressure will be greater than that at constant volume.

Thus, for gas A the process is carried out at constant volume while for gas B that is carried out at constant pressure. The change in entropy is greater for gas B.

Learn more about work done by gas at constant pressure here: https://brainly.com/question/11982158

Answer:

Density

Explanation:

The more dense something is, the more packed the particles are. The equation for density is m/v.

The temperature for which the minimum escape energy is 15 times the average kinetic energy of an oxygen molecule is 10,684.4 K.

The temperature for which the minimum escape energy is 15 times the average kinetic energy of an oxygen molecule is determined by applying principle of conservation of energy as shown below;

E = K + U

E = K - GmM/R

0 = K - GmM/R

K = mgR

When the minimum escape energy is 15 times average kinetic energy;

15K = mgR

[tex]15 \times \frac{3}{2} kT = mgR[/tex]

where;

[tex]T = \frac{2mgR}{15 \times 3k} \\\\T = \frac{(2)(5.316 \times 10^{-26})(9.8)(6.371 \times 10^6)}{45(1.38066 \times 10^{-23})} \\\\T = 10,684.4 \ K[/tex]

Thus, the temperature for which the minimum escape energy is 15 times the average kinetic energy of an oxygen molecule is 10,684.4 K.

Learn more about minimum escape energy here: https://brainly.com/question/16008094

A hot tungsten filament emit electromagnetic radiation within the bulb because the tungsten is present within the bulb.

Due to its high melting point, tungsten can be heated to 3000°C where it glows white hot providing very good brightness due to the presence of argon.

So we can conclude that a hot tungsten filament emit electromagnetic radiation within the bulb.

Learn more about radiation here: https://brainly.com/question/893656

Electromagnetic radiation is made up of electromagnetic field waves. A hot tungsten filament emits electromagnetic radiation in the presence of Argon.

Electromagnetic radiation is made up of electromagnetic field waves that travel through space carrying electromagnetic radiant energy. Radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays are all examples of electromagnetic waves.

When tungsten is heated to a temperature of around 3000 °C, the tungsten starts to emit lights. Tungsten when used in a bulb as a filament then because of its high melting point when electricity is passed through it, it starts to shine white-hot and provides extremely good brightness due to the presence of argon.

Hence, A hot tungsten filament emits electromagnetic radiation in the presence of Argon.

Learn more about Electromagnetic Radiation:

https://brainly.com/question/10759891

#SPJ4

For an automobile spring using a 25 kg car battery, the spring constant is mathematically given as

K=4.08.3N/m

Question Parameter(s):

a 25 kg car battery

The springs are pulled out by 0.06 meters

Generally, the equation for the Force  is mathematically given as

F=mg

Therefore

F=(25*9.8)

(25*9.8)=K(0.06)

K=4.08.3N/m

In conclusion, the spring constant

K=4.08.3N/m

Read more about Force

https://brainly.com/question/13370981

Answer:

I don't know

Explanation:

you need then search here

Explanation:

[tex]kinetic \: energy = \frac{1}{2} m {v}^{2} [/tex]

[tex]81 = \frac{1}{2}m {(9)}^{2} [/tex]

[tex] \frac{81 \times 2}{81} = m[/tex]

[tex]m = 2kg[/tex]

Answer:

distance of compression: 0.07071 m

Explanation:

[tex]\sf energy = \dfrac{1}{2} kx^2[/tex]

[tex]\rightarrow \sf 0.5= \dfrac{1}{2} (200)x^2[/tex]

[tex]\rightarrow \sf 0.5= (100)x^2[/tex]

[tex]\rightarrow \sf 5\ *\ 10^{-3}= x^2[/tex]

[tex]\rightarrow \sf x = \sqrt{5\ *\ 10^{-3}}[/tex]

[tex]\rightarrow \sf x =0.07071 \ m[/tex]

Answer:

Dipole

Explanation:

A pair of opposite electric charges of equal magnitude is called a(n)

Answer:

Dipole

Explanation:

Answer:

The triboelectic charging process (a.k.a., charging by friction) results in a transfer of electrons between the two objects that are rubbed together. Rubber has a much greater attraction for electrons than animal fur.

Explanation:

HOPE IT HELP^_^

THANKS^_^

The statement 'a distant star gives off a visible range of light whose color depends on its temperature' is supported by the wave model​.

The wavelength can be defined as the periodic distance of a given wave that repeats in a constant way.

The emissivity of particles is a function of both wavelength and temperature of a given material/object. Visible wavelengths range from 700 nm to 400 nm (violet color).

Star temperature largely determines its color, blue stars are warmer than yellow and red stars, and red stars are cooler than yellow stars.

Learn more about visible wavelengths here:

https://brainly.com/question/10728818

The experiment was conducted in my toilet wash hand sink with a bar soap 30 centimeter away from the faucet, the number of drips record per minute is 120 drips

Data

Calculation for the number of drips per minute

= 20*6

= 120 drips

What is Control Experiment

Control  experiment are carried out to minimize the effects of variables other than the independent variable

Learn more about about control experiment

https://brainly.com/question/24708013

The triangular crest. shows the resulting wave when they cross at a point x. The meeting point of two waves is known as wave interference ia x.

A wave pulse is a short, non-periodic wave that is formed by a single energy input rather than a continuous or repeated energy input.

Wave interference is the result of multiple waves interacting. There are two types of interference: constructive and destructive.

The relative displacement of the waves is the difference between the two. Wave beats are frequently caused by wave interference.

Hence the triangular crest. shows the resulting wave when they cross at a point x.

To learn more about the wave pulse refer to the link;

https://brainly.com/question/1291549

Answer:

B

Explanation:

Got it right on edge

1200

Explanation:

F = m x (v / t)

v / t = F / m

v = (F / m) / t

v = (600 / 5) / 0.1

v = 120 / 0.1

v = 1200 m / s

Answer:

ν = E/h = 4.56x10-19 J / 6.626x10-34 Jsec-1

ν = 6.88x1014 s-1

Explanation:

The frequency of a photon with an energy of 4.56 x 10⁻¹⁹ J is 6.88×10¹⁴ s⁻¹.

The number of waves that travel through a particular point in a given length of time is described by frequency. So, if a wave takes half a second to pass, the frequency is 2 per second.

Given that the energy of the photon is 4.56 x 10⁻¹⁹ J. Therefore, the frequency of the photon can be written as,

[tex]\rm \gamma = \dfrac{E}{h} = \dfrac{4.56x10^{-19} J}{6.626 \times 10^{-34}\ Jsec^{-1}}\\\\\\\gamma = 6.88 \times 10^{14}\ s^{-1}[/tex]

Hence, the frequency of a photon with an energy of 4.56 x 10⁻¹⁹ J is 6.88×10¹⁴ s⁻¹.

Learn more about Frequency:

https://brainly.com/question/5102661

#SPJ4

A brown dwarf is a starlike body that do do not have enough mass to ignite hydrogen fusion in their centers.

Brown dwarf refer to a body of substellar that is not huge or big enough to undergo nuclear fusion of o hydrogen into helium in their cores. This formed when there is contraction of gases in the intercellar spaces. The have a mass between 13 to 80 times that of Jupiter.

Therefore, brown dwarf is a starlike body that do don't not have enough mass to ignite hydrogen fusion in their centers.

Learn more about brown dwarf below.

https://brainly.com/question/15722167

I believe the answer to your question would be True

The wavelength of light will be 195.34 nm.

The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.

The wavelength is also defined as the distance between two locations in a wave that have the same oscillation phase.

The wavelength from the diffraction grating formula is found as;

[tex]\rm m \lambda= d sin\theta \\\\ \lambda= \frac{dsin \theta }{m}\\\\ \lambda= \frac{600 \times sin 19^0 }{1} \\\\ \lambda= 195.34\ nm[/tex]

Hence the wavelength of light will be 195.34 nm.

To learn more about the wavelength refer to the link;

brainly.com/question/7143261

Answer:543nm

Explanation:

becuase

The final kinetic energy of the skateboarder after she freewheels and did work against friction on the flat section of the path is 4,600 J.

The final kinetic energy of the stakeboarder is determined by applying the principle of conservation of energy as shown below;

ΔK.E = -W

K.Ef - K.Ei = -W

where;

K.Ef = K.Ei - W

K.Ef = 5,000 J - 400 J

K.Ef = 4,600 J

Thus, the final kinetic energy of the skateboarder is 4,600 J.

Learn more about kinetic energy here: https://brainly.com/question/25959744

For a  flat coil of wire has an inductance of 40. 0 mh and a resistance of 6. 00 ω, the rate of energy being delivered is mathematically given as

P= 53 W

Generally, the equation for the Battery power  is mathematically given as

P = I (dt)V

Therefore

P= 2.50 A * 21.2V

P= 53 W

In conclusion, rate of energy being delivered

P= 53 W

Read more about Energy

https://brainly.com/question/13439286

A flat coil of wire has an inductance of 40. 0 mh and a resistance of 6. 00 ω. It is connected to a 21. 2-v battery at the instant t = 0.The power developed will be 53 Watt.

Electric power is the product of the voltage and current. Its unit is the watt. It is the rate of the electric work done.

The given data in the problem is;

V is the voltage = 21.2 volt (V)

I is the electric current = 2.50 ampere (A)

The formula for the power is given as;

[tex]\rm P= V I \\\\\ P= 2.50 \times 21.2 \\\\ P=53 \ watt[/tex]

Hence electric power developed will be 53 Watts.

To learn more about the electric power refer to the link;

https://brainly.com/question/12316834

#SPJ4

Answer:

At some point on say, the receiving screen, light emanating from the left side of the slit will be out of phase (a difference of 1/2 wavelengths) from   light coming from the center of the slit.

Thus for every point that is left of the center of the slit, there will be a point on the right side of the slit that is out of phase,

There will be no light on the screen at that particular point and thus there will be a dark fringe there.

That is the basic explanation for the appearance of dark and bright fringes on the receiving screen.

option D

hope it helps...!!!

Answer:

B.

Explanation:

You have to divide.
10.0/20.0 = 0.50

I apologize if it is incorrect-

I hope it helps! Have a great day!

Anygays-

The acceleration of the mass down the plane is determined as (4mg sinθ)/(3mr²).

The acceleration of the mass down the plane is determined by applying the principle of conservation of angular momentum.

Fr = Iα

where;

(mg sinθ)r = Iα

(mg sinθ)r = I(ar)

(mg sinθ) = I(a)

[tex]a = \frac{mg \times sin(\theta)}{I} \\\\a = \frac{mg \times sin(\theta)}{3mr^2/4} \\\\a = \frac{4mg \times sin(\theta)}{3mr^2}[/tex]

Thus, the acceleration of the mass down the plane is determined as (4mg sinθ)/(3mr²).

Learn more about acceleration here: https://brainly.com/question/14344386

The tension does no (zero) work

F· S = W

Since the tension is perpendicular to the direction of motion, and there is no change in S the work done is zero.

The distance between the image and the mirror is -8.6 cm

A concave mirror has a reflective surface that is curved inward and away from the light source. Concave mirrors reflect light inward to one focal point.

Unlike convex mirrors, the image formed by a concave mirror shows different image types depending on the distance between the object and the mirror.

Let's use the mirror equation to solve the problem:

[tex]\dfrac{1}{f}=\dfrac{1}{d_o}+\dfrac{1}{d_i}[/tex]

where f is the focal length of the mirror,  the distance of the object from the mirror, and  the distance of the image from the mirror.

For a concave mirror, for the sign convention f is considered to be positive. So we can solve the equation for  by using the numbers given in the text of the problem:

[tex]\dfrac{1}{12}=\dfrac{1}{5}+\dfrac{1}{d_i}[/tex]

[tex]\dfrac{1}{d_i}=-\dfrac{7}{60}[/tex]

[tex]d_i=-8.6\ cm[/tex]

Where the negative sign means that the image is virtual, so it is located behind the mirror, at 8.6 cm from the center of the mirror.

Hence the distance between the image and the mirror is -8.6 cm

To know more about concave mirror follow

https://brainly.com/question/1147247

Answer:

The equation of equilibrium at the top of the vertical circle is:

\Sigma F = - N - m\cdot g = - m \cdot \frac{v^{2}}{R}

The speed experimented by the car is:

\frac{N}{m}+g=\frac{v^{2}}{R}

v = \sqrt{R\cdot (\frac{N}{m}+g) }

v = \sqrt{(5\,m)\cdot (\frac{6\,N}{0.8\,kg} +9.807\,\frac{kg}{m^{2}} )}

v\approx 9.302\,\frac{m}{s}

The equation of equilibrium at the bottom of the vertical circle is:

\Sigma F = N - m\cdot g = m \cdot \frac{v^{2}}{R}

The normal force on the car when it is at the bottom of the track is:

N=m\cdot (\frac{v^{2}}{R}+g )

N = (0.8\,kg)\cdot \left(\frac{(9.302\,\frac{m}{s} )^{2}}{5\,m}+ 9.807\,\frac{m}{s^{2}} \right)

N=21.690\,N

The type of circuit does this traffic situation model will be a parallel circuit because there is more than one path.

A parallel circuit has branches that split the current such that just a portion of it passes through each branch.

The voltage or potential difference between each branch of a parallel circuit is the same, but the currents might differ.

A parallel circuit is having more than one path in order to reach it on time he has to take a different path.

Hence the type of circuit does this traffic situation model will be a parallel circuit because there is more than one path.

To learn more about the parallel circuit refer to the link;

brainly.com/question/26589211

Answer:

C) a parallel circuit because there is more than one path

Explanation:

C) a parallel circuit because there is more than one path