You are on an airplane traveling with a constant velocity at an altitude of 20,000 m. What is the acceleration of gravity at that altitude

If two blocks are connected by a string of negligible mass that passes over massless pulleys, the system can be analyzed using the principles of Newton's second law and the conservation of energy.

In this scenario, the net force acting on each block is the tension in the string, which is equal in magnitude for both blocks.

Therefore, if the blocks have different masses, they will have different accelerations.

In this scenario, the mechanical energy of the system is the sum of the gravitational potential energy and the kinetic energy of the blocks. If the pulleys are massless and frictionless, then the mechanical energy of the system will be conserved.

In summary, the two blocks will move together with the same acceleration if the pulleys are massless and frictionless.

To know more about pulleys:

https://brainly.com/question/30189162

#SPJ4

Since the displacement is a vector quantity, the distance is 11 miles while displacement is 8.5 miles

Displacement is a distance travelled in a specific direction. Distance is a scalar quantity while displacement is a vector quantity.

Given that Stephen has to drive 8 miles south and 3 miles east to get to work.

His distance will be 8 miles + 3 miles = 11 miles

While his displacement can be calculated by using Pythagoras theorem. That is,

Displacement D = √(8² + 3²)

D = √(64 + 9)

D = √73

D = 8.5 miles

Therefore, his distance is 11 miles and his displacement is 8.5 miles.

Learn more about Displacement here: https://brainly.com/question/2109763

#SPJ1

According to Coulomb's Law the observation of repulsion between two objects provides more conclusive evidence that an object is charged, as opposed to attraction.

What is Coulomb's Law?

Coulomb's Law is a fundamental principle in physics that describes the interaction between electrically charged objects. It states that the force of attraction or repulsion between two charged objects is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.

Attraction or repulsion between two objects is one way to determine if an object is charged. The presence of an electric charge on an object can be determined by observing whether it experiences a force of attraction or repulsion when brought near another charged object.

Attraction or repulsion between two charged objects is a fundamental effect of electric charges. Opposite charges will experience a force of attraction towards each other, while like charges will experience a force of repulsion away from each other. This is known as Coulomb's Law.

Therefore, as per Coulomb's Law the observation of repulsion between two objects provides more conclusive evidence that an object is charged, as opposed to attraction.

To learn more about Coulomb's Law from the given link:

https://brainly.com/question/506926

#SPJ4

The new force of attraction is 324N if the distance between the centres of the two objects is reduced by a factor of 3e.

The equation for the force of gravitational attraction between two objects is: F = G*(m1*m2)/r^2 Where F is the force of attraction, G is the gravitational constant (6.67 x 10^-11 Nm^2/kg^2), m1 and m2 are the masses of the two objects, and r is the distance between their centers. If the distance between the two objects' centers is decreased by a factor of three, the new force of attraction will be: F' = G*(m1*m2)/(r/3)^2The ratio of the new force of attraction to the original force of attraction is:

F'/F = (r/3)^2 If we substitute in the original force of attraction, we have:

F'/36 = (r/3)^2 = F' = 36 * (r/3)^2

As we decrease the distance by a factor of 3, the new force of attraction will increase by a factor of 9.

F' = 36*9 = 324 N

Therefore, the new force of attraction is 324 N.

Learn more about gravitational attraction here:

https://brainly.com/question/19822389

#SPJ4

Answer:

Explanation:

a.speed with direction associated

b.the ability to resist motion

c.The rate of change of position of an object

e.any influence object's motion

f.forces cancel out, create equilibrium

g.total force acting on an object

h. change in position of an object (total distance from starting point)

Yes, seismic-wave velocity can change as the waves pass through different rock types.

Rocks with high porosity and permeability tend to have lower seismic-wave velocities because the pores contain fluid that can dampen the energy of the seismic waves, while rocks with high compaction and densities tend to have higher seismic-wave velocities. Additionally, changes in temperature and pressure can also affect seismic-wave velocity.

Seismic sounders are seismic instruments that use a wide range of sound frequencies to measure the Earth's subsurface structure, composition, and its response to seismic waves generated from a source.

They are used in the exploration of oil, gas and mineral resources and for investigating earthquake and volcanic processes.

Learn more about seismic sounders:

https://brainly.com/question/15073818

#SPJ4

Since the particle always moves in a circular motion in a direction perpendicular to the radial direction.

The work done by the centripetal force in a circular motion is therefore always zero since the dot product is always zero. A force known as the centripetal force acts on a particle when it is revolving around a specific axis or point. The circular path's center is where this force is directed. The ideal decision is (d) Therefore, the body's weight will be equal to the centripetal force when the angular acceleration reaches the same level as the acceleration caused by gravity. It should be noted that for the centripetal force to equal the weight, there must be a uniform circular motion.

Learn more about acceleration here-

https://brainly.com/question/12550364

#SPJ4

Answer:

378 N

Explanation:

F = ma = (63 kg)(6 m/s²) = 378 N

A skier weighing 63 kg needs 189N of force to accelerate at 6 m/s. The magnitude of the force required to accelerate the sled is 91 newtons.

An object's acceleration is equal to the net force acting on it divided by its mass, or a = F m, according to Newton's second law of motion. When the object's mass and the net force it is subjected to are known, this acceleration equation can be used to determine its acceleration.

By the second law of Newton, F = ma Add the following numbers:

F=189N F=63kg(2ms 2)

Formula for acceleration: there are three equations for acceleration:

To learn more about Newton's second law here:

https://brainly.com/question/13447525

#SPJ1

The difference between active flexibility and passive flexibility is that in active flexibility, we rely on our own muscle power to reach the end range, but in passive flexibility, we rely on an external push to reach the end range.

According to the findings of recent studies, active flexibility has a stronger connection to a person's level of sporting performance than passive flexibility does. The ability to build active flexibility is more difficult to achieve than passive flexibility. Active flexibility involves passive flexibility in addition to muscle strength in order to be able to retain and maintain the initial extended position.

To learn more about active flexibility and passive flexibility, click here:

https://brainly.com/question/14345573

#SPJ4

The ball requires a total of zero work to go to the right at 24 m/s.

Take into account the ball's kinetic energy.

Vi = -24 ms-1 for the initial velocity

Final velocity: vf = +24ms⁻¹

K = 12mvf²- 12mvi² = 12m(vf² - vi²) = 12m(242 - 242) = 0,

meaning that the ball does not undergo any effort.

As an alternative, think about the effort made to stop the ball.

W1 = ½m(0 – 24²) = 0.5 × 0.06 × –576 = –17.28J

Work required to accelerate the ball from rest to +24 milliseconds per second was W2 = 12m(242 - 0) = 0.5 0.06 576 = +17.28 J.

Therefore, the sum of the work is W = W1 + W2 = -17.28 + 17.28 = 0 J.

Learn more about kinetic energy here :

brainly.com/question/26472013

#SPJ4

If the block starts from rest, then revolutions that it make before the tube breaks is 0.947 rotations.

When object turns around an internal axis, it is called a rotation. When object circles an external axis, it is called revolution.

Given mass of block = 600 g = 0.6 kg ; Radius of rotation = 1.0 m-long

Given thrust force of 4.2 N

The maximum tension is 50 N.

As thrust is perpendicular to the tube. So, tangential component of the thrust force is Ft=4.2 N and radial component Fr=0

As we know, α = F/m r

= 4.2/0.6 * 1

α = 7 rad/s²

As, m r ω²= 50 N

ω² = 50/ 0.6 * 1.0

ω = 9.128 rad/s

Ф = ω² - ω0²/2α

= (9.128² - 0)/2 * 7

Ф = 5.951 rad

As 1 Radians = 0.1592 Rotations,

5.951 rad = 0.947 rotations.

To know more about revolution in physics, refer

https://brainly.com/question/10380074

#SPJ1

'Only a decreasing gravitational force that acts downward' act on the ball while it is on the way up.

What is gravitational force?

Gravitational force is the force of attraction between two objects that have mass. It is the force of gravity that causes objects to be pulled towards each other. The strength of the force depends on the mass of the objects and the distance between them.

Since the ball is moving away from the Earth, the gravitational force between the two objects is decreasing. The ball does not experience any upward force and thus the only force acting on it is the decreasing gravitational force that acts downward.

Hence, Option A is correct.

To know more about gravitational force,

https://brainly.com/question/72250

#SPJ4

A coulomb is a measure of electrical charge and has units of amperes times seconds (A⋅s). A faraday is a constant equal to the magnitude of electric charge per mole of electrons of 96,485.3399 Coulombs (C).

What is magnitude?
Magnitude is a measure of the size or scale of an object or event. It is often used to describe the intensity or severity of a phenomenon, such as earthquakes and hurricanes. It is usually expressed as a number on a logarithmic scale. In astronomy, magnitude is used to measure the brightness of stars and other celestial bodies. On Earth, magnitude is often used to measure the size of earthquakes and other seismic events. Magnitudes are typically expressed as a number on a logarithmic scale, with a greater magnitude indicating a larger size or scale of the event. Magnitudes can also be used to measure the intensity of light, sound, and other forms of energy.

To learn more about magnitude
https://brainly.com/question/30015989

#SPJ4

Potential energy is the power that a thing possesses as a result of where it is in relation to other objects.

The earth can pull you down through the force of gravity while doing work in the process, being at the top of a stairwell gives you more potential energy than standing at the bottom.

Two magnets have more potential energy when they are held apart than when they are near to one another. They will migrate near each other and begin working if you let them go.

The force acting on the two objects affects the potential energy formula. P.E. = mgh, where m is the mass in kilograms and g is the acceleration due to gravity, is the formula for gravitational force.

Therefore, Potential energy is the power that a thing possesses as a result of where it is in relation to other objects.

To learn more about Potential energy, refer to the link:

https://brainly.com/question/24284560?

#SPJ1

When the filtrate moves through the two arms of the Henle's loop in directions that are diametrically opposed, countercurrent occurs.

For the medullary interstitial fluid to remain at a high osmolarity, Henle's loop's ascending limb is essential. These two limbs' close companion, the vasa recta, similarly has two opposing orientations of function. The hand can be significantly cooled without losing body heat because the deep veins are wrapped around the arteries, and the counter-current flow that results from this short-circuits the loss of body heat.

Over the course of their full interaction, the counter-current exchange system may keep the gradient between the two flows practically constant. This can result in practically all of the property transferring if the length and flow rate are both sufficient.

To know more about countercurrent

https://brainly.com/question/28137052

#SPJ4

Answer:

wool

Explanation:

Wool comes from sheep.  Rayon, candles (the paraffin type) and petrochemicals all come from petroleum.

Answer:

3 km displacement

Explanation:

I'm pretty sure that's the answer, I'm so sorry if it's not

With merely a 2. 3 m/s beginning velocity, a horizontally dart launch accelerates upward at a rate of -9.8 m/s².

The rate at which speed and distance for velocity vary over time is known as acceleration. Anything is said to have been accelerated when it goes quicker or slower in a single direction.

When an item accelerates positively, it moves more quickly than it did before. In the first instance, the moving automobile showed positive acceleration. The acceleration is accelerating in a way that is comparable with the direction in which the vehicle is speeding up and velocomotion is accelerated in a route that is compatible with the direction in which the vehicle is

Let's say a body of mass (m) is shot from a height (h) above surface of the planet. As it descends at a faster rate, it eventually reaches the ground.

Under the influence of gravity, which is acting at a distance r from the earth's core, the body begins to accelerate in that direction.

Then, ma = GMm/r²

a = GM/r²

Therefore, the value of the acceleration due to gravity (g) = GM/r2.

Any object freely falling to the surface of the earth has acceleration due to gravity is 9.8m/s².

The earth's gravitational attraction is felt by the object if it shifts away from the planet's surface. Dart's vertical acceleration is therefore equivalent to -g.

As a result, the dart's vertical acceleration is equivalent to -9.8m/s2.

To know more about acceleration visit:

https://brainly.com/question/2303856

#SPJ4

The causes diffusion in cells are,  temperature, area of interaction, the size of the concentration gradient.

1) Temperature, The rate of diffusion increases as temperature rises.

2) Area of Interaction: The rate of diffusion increases as the surface area of interacting molecules increases.

3) The Size of the Concentration Gradient: The rate of diffusion is higher the greater the concentration gradient between the regions.

Higher the rate of diffusion, the more concentration between the locations. The movement is forced because of the increased pressure that the higher concentration creates. The movement of molecules from a location of higher concentration to a region of lower concentration can be used to define diffusion. The continuous motion (or kinetic energy) of atoms in matter is the primary cause of diffusion.

To know more about diffusion

https://brainly.com/question/28851242

#SPJ4

The acceleration of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Acceleration is the rate of change of velocity. At any point on a trajectory, the magnitude of the acceleration is given by the rate of change of velocity in both magnitude and direction. Acceleration of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of wee can calculate. Hence by the primary information that we have we can formerly consider that the acceleration which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Learn more about Acceleration:

brainly.com/question/21509870

#SPJ4

According to the given statement 67.7%  is the efficiency of the engine.

A comparison of the energy output and input in a particular system is called efficiency in physics (and frequently in chemistry). Its definition is the proportion of output energy to input energy, which is provided by the equation: To describe energy in the form of heat or power, this equation is frequently utilized.

n = 1 - (QC/QH)

n = efficiency

QC = Cold Reservoir = 220 K

QH = Hot Reservoir = 680 K

n = 1 - (220 ÷ 680)(÷10)

n = 1 - (22 - 68) (2)

n = 1 - (11 ÷ 34 )

n = (34 - 11) ÷ 34

n = 23 ÷ 34

n = 0.676 * 100

n = 67.6

Therefore, 67.6% is the efficiency of the engine.

Learn more about efficiency from the given link.

brainly.com/question/13222283

#SPJ4

The magnitude of the magnetic field is 7.27 x 10-6 T and its direction is perpendicular to the velocity of the proton.

The force experienced by a charged particle in a magnetic field is given by the equation F = q(v x B), where F is the force, q is the charge of the particle, v is the velocity of the particle, and B is the magnetic field.

Given the information provided in the question, we can set up the following equation:

1.60 1013 m/s2 = (q)(2.20 107 m/s) x B

To find the magnitude of the magnetic field, we can divide both sides of the equation by the velocity:

B = 7.27 x 10-6 T

To find the direction of the magnetic field, we know that the force on the proton is perpendicular to its velocity and the direction of the magnetic field. The direction of the magnetic field can be found using the right-hand rule which states that if you point your fingers in the direction of the velocity and then curl them in the direction of the force, your thumb will point in the direction of the magnetic field.

Find more about proton

brainly.com/question/13059613

#SPJ4

If you push with a force of 65 N and the bookcase accelerates at 0. 12 m/s2. The answer to the given question is A65=41×A.A=1.2m.

Functions and co efficients are: Ff=μkFN F f = μ k F N

The equation for kinetic friction, where FN is the object's normal force and k is the coefficient of kinetic friction.

The resistive force of friction (Fr) divided by the normal or perpendicular force (N) pushing the objects together yields the coefficient of friction (fr), which is a numerical value. The formula which is fr = Fr/N serves as a representation of kinetic friction.

The primary distinction between static and kinetic friction is that kinetic friction occurs when there is relative motion between the surfaces, whereas static friction occurs when the surfaces are at rest.

To learn more about friction visit:

brainly.com/question/13000653

#SPJ4

The statement that best defines climate is as follows: the average conditions of the atmosphere for a large region for the past 30 years or more (option D).

Climate is the long-term manifestations of weather and other atmospheric conditions in a given area or country.

Climate is now usually represented by the statistical summary of its weather conditions during a period long enough to ensure that representative values are obtained (generally 30 years).

A description of a climate includes information on, e.g. the average temperature in different seasons, rainfall, and sunshine.

Therefore, option D correctly describes climate.

Learn more about climate at: https://brainly.com/question/10440860

#SPJ1

Answer:

The amount of work done is 45 J.

Explanation:

We know that the force applied is 15N. The amount of displacement experienced by the box is 3 metres along the floor.

Thus, F= 15N

D= 3 metres

The formula for calculating work done is W= F×D

Thus, W=15×3

W=45J

Thus, the amount of work done is 45J.

The freight car which is being dumped into the metal scrap has the final velocity of 0.18 m/s.

In this problem, we use the principle of conservation of linear momentum.

Given that,

Mass of the freight car m₁ = 30,000 kg

Mass of the hopper m₂ = 110,000 kg

Velocity of the freight car u₁ = 0.85 m/s

Velocity of the hopper u₂ = 0

Let the velocity of the loaded freight car = v

We need to find out v.

m₁ u₁ + m₂ u₂ = ( m₁ + m₂) v

After putting the values into the equation above, we have,

30,000 × 0.85 + 110,000 × 0 = (30,000 + 110,000) v

140,000 v = 25500

v = 0.18 m/s

Thus, the required velocity of the loaded freight car is calculated to be 0.18 m/s.

To know more about velocity:

https://brainly.com/question/12945710

#SPJ4

For segment AB in the bacterium's trajectory, The x component of its velocity is 3.92m/s.

[tex]AB_X = 50um AB_Y = 10um[/tex]

[tex]AB =\sqrt{50^{2}+ 10^{2} } = 50.99um[/tex]

[tex]t = \frac{AB}{20} = 2.55[/tex]

[tex]V_ABY = \frac{AB_Y}{T}[/tex]

[tex]\frac{10}{2.55}[/tex] [tex]= 3.92m/s[/tex]

Speed is the directional pace of an item in motion as an illustration of its fee of change in position as discovered from a specific body of reference and as measured with the aid of a selected well-known time (e.g. 60 km/h northbound). speed is an essential idea in kinematics, the department of classical mechanics that describes the motion of our bodies.

Velocity is a physical vector quantity; both importance and route are had to define it. The scalar absolute value (significance) of velocity is known as pace, being a coherent derived unit whose amount is measured within the SI (metric system) as meters per 2d (m/s or m⋅s−1). as an example, "5 meters per 2d" is a scalar, whereas "5 meters in step with 2nd east" is a vector. If there's an exchange in speed, direction, or each, then the object is stated to be present process an acceleration.

To learn more about Velocity visit here:

brainly.com/question/18084516

#SPJ4

The tension in the wire is 2.99986 N.  The amplitude of the oscillation of the wire is approximately 0.01067 meters.

The tension (T) can be calculated using the equation:

T = m × g

T = 0.306 × 9.81

T = 2.99986 N

The linear mass density (μ) of the wire is given by the mass per unit length of the wire. It is calculated as:

μ = m(wire) ÷ L(wire)

μ = 0.185 ÷ 1

μ = 0.185 kg/m

The speed (v) of the wave on the wire can be determined using the equation:

v = √(T ÷ μ)

v = √(2.99986 ÷  0.185 )

v = 7.351 m/s

The power (P) transmitted by the wave is related to the amplitude (A) and the speed (v) of the wave through the equation:

P = 2π² × μ × v × A² × f²

A² = P ÷ (2π² × μ × v × f²)

A² = 139 ÷ (2π² × 0.185 × 7.351 × (60.0)²)

A² = 1.138 × 10⁻⁴

A = √(1.138 × 10⁻⁴)

A = 0.01067 m

Therefore, The amplitude of the oscillation of the wire is approximately 0.01067 meters.

To know more about the oscillation:

https://brainly.com/question/31472633

#SPJ12

Answer:

(a) 0.500 s displacement 70.0 m - 7.2 m velocity 7.2 m/s

(b) 1.00 s displacement 70.0 m - 28.8 m velocity -13.6 m/s

(c) 1.50 s displacement 70.0 m - 57.6 m velocity -20.4 m/s

(d) 2.00 s displacement 70.0 m - 92.8 m velocity -24.0 m/s

(e) 2.50 s displacement 70.0 m -134.4 m velocity -25.2 m/s

The velocity of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Velocity is the rate of change of velocity. At any point on a trajectory, the magnitude of the velocity is given by the rate of change of velocity in both magnitude and direction. Velocity of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of we can calculate. Hence by the primary information that we have we can formerly consider that the velocity which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Learn more about Velocity:

brainly.com/question/18084516

#SPJ4