A per the statement the true and false have been stated.
The mosquitos are flies is True. All large invertebrates live in the sea or at least in water is False. An arthropod is a form of arachnid. False. The giant squid is the world's largest invertebrate is true. Earthworms have skeleton is false. An octopus is the most advance of the mollusks is True. Insects are vertebrates animals is false . Most starfish have shells is true. All Snails have a spiral protective shell is true. The Ants and the termites both live in their colonies with a complex social structure true.Learn more about the statement is correct and False if it is incorrect.
brainly.com/question/25942470.
Conversion factors are useful in solving problems in which a given measurement must be expressed in
a. some other unit of measure.
b. the correct precision.
c. the correct number of significant digits.
d. scientific notation.
Conversion factors are useful in solving problems in which a given measurement must be expressed in some other units of measure.
Conversion factors are helpful in solving issues where one unit of measurement needs to be expressed in another. In general, a measurement's numerical value changes when it is multiplied by a conversion factor, while the quantity being measured's real size stays the same.
A conversion factor is a number that is used to multiply or divide one set of units into another. If a conversion is required, it must be done using the correct conversion factor to get an identical value. For instance, 12 inches equals one foot when converting between inches and feet.
To learn more about Conversion factors please visit -https://brainly.com/question/23510660
#SPJ1
Because of a scarcity of workers in the New World, persons were transported against their will to work on large farms without pay and under difficult conditions. Which of the following best describes this?
British indentured servant
Enslaved African
Spanish conquistador
French fur trapper
Enslaved African is best described as the condition which involved transporting people against their will to work on large farms without pay.
What is Slavery?This is referred to a situation in which an individual is owned by another. Slaves were moved from Africa against their will to work on large farms.
They weren't given any pay and worked under hard conditions thereby making option B the correct choice.
Read more about Slavery here https://brainly.com/question/9374853
#SPJ1
In this reaction, how many grams of CH4 would be formed from 25 g C?
C + 2H2 → CH4
33.33 grams of CH4 would be formed from 25 g C.
C + 2H2 → CH4
from given reaction we can say that ,
2 moles of hydrogen is required for 1 mole of carbon and these will react to form 1 mole of methane.
atomic mass of Carbon = 12 gm
Molecular mass of H2 = 2(H)
= 2(1)
=2gm
moles = molecular mass / given mass
for C,
if 12 gm = 1 mole
then 25 gm = ? mole
=2.083 moles
1 mole of C will produce 1 moles of CH4
so, 2.083 moles of C also will produce 2.083 moles moles of CH4
molecular weight of methane= C+4(H)
= 12+4(1)
= 16 gm
amount of methane produced= moles × molecular mass
=2.083× 16
= 33.33 gm
Learn more about moles here...
brainly.com/question/1427235
#SPJ1
The pressure in car tires is often measured in pounds per square inch ( lb/in.2 ), with the recommended pressure being in the range of 25 to 45 lb/in.2 . Suppose a tire has a pressure of 32.5 lb/in.2 . Convert 32.5 lb/in.2 to its equivalent in atmospheres.
Express the pressure numerically in atmospheres.
when we convert 32.5 lb/in² to atmosphere, the result obtained is 2.21 atm
Conversion scale14.6959 lb/in² = 1 atm
Data obtained from the questionPressure (in lb/in²) = 32.5 lb/in²Pressure (in ATM) =?How to convert 32.5 lb/in² to atm14.6959 lb/in² = 1 atm
Therefore
32.5 lb/in² = 32.5 / 14.6959
32.5 lb/in² = 2.21 atm
Thus, 32.5 lb/in² is equivalent to 2.21 atm
Learn more about conversion:
https://brainly.com/question/2139943
#SPJ1
Identify the chirality center (sometimes called chiral atom) in each molecule. If the molecule does not contain a chirality center, select none.
The only chiral center in the molecule is carbon 4 because is attached to four different atoms or groups.
What is a chiral center?The term chiral center refers to a carbon atom that is attached to four different atoms or groups. This kind of carbon atom is able to rotate the direction of plane polarized light.
We can see from the structure of the molecule that the only chiral center in the molecule is carbon 4 because is attached to four different atoms or groups.
Learn more about chiral center:https://brainly.com/question/13667509
#SPJ1
What would the pH of a solution that had a hydroxide ion concentration of 1 x 10-2 M be?
Taking into account the definition of pH and pOH, the pH of the solution is 12.
Definition of pHpH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:
pH= - log [H⁺]= - log [H₃O⁺]
Definition of pOHSimilarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:
pOH= - log [OH⁻]
Relationship between pH and pOHThe following relationship can be established between pH and pOH:
pOH + pH= 14
pH in this caseA solution had a hydroxide ion concentration of 1×10⁻² M. In other words [OH⁻]= 1×10⁻² M.
Replacing in the definition of pOH, it is calculated as:
pOH= - log (1×10⁻² M)
Solving;
pOH= 2
Replacing in the relationship established between pH and pOH, the pH can be calculated as:
pH + 2= 14
Solving:
pH= 14 - 2
pH= 12
In summary, the pH of the solution is 12.
Learn more about pH and pOH:
brainly.com/question/16032912
brainly.com/question/13557815
#SPJ1
A neutral atom has high electronegativity.
Describe what happens to this atom during ionic bond formation.
Please get it cleared and stored into your cerebrum that a cation is formed when a neutral atom loses one or more electrons from its valence electron shell.
However too, on other hand an anion is formed when a neutral atom gains one or more electrons in its outermost electron shell.
A cation means a positive ion
An anion means a negative ion
What is electronegativity?Electronegativity is one of physical periodicity and property of elements that describes the tendency of an atom to attract electrons toward itself.
Generally, electronegativity of an atoms of elements in a particular trend is affected by both its atomic number and the distance that its valence electrons reside from the charged nuclei.
Learn more about electronegativity:
https://brainly.com/question/2456715
#SPJ1
A gas company in Massachusetts charges $1.30 for 17.0ft³ of natural gas. Convert this rate to dollars
per liter of gas.
Answer:
See below
Explanation:
Conversion factor : 1 ft^3 = 28 .317 liters
$ 1.30 /( 17 ft^3 * 28.317 liters/ft^3) = $.0027 per liter
What is the name of Pb(NO3)2? Explain how you determined the bond type and the steps you used to determine the naming convention for the compound.
The name of Pb(NO3)2 of is Lead II trioxonitrate V
The bond which exist in is Lead II trioxonitrate V ( Pb(NO3)2 ) are both ionic and covalent bond
What is a compound?A compound is a substance which contains two or more elements chemically combined together
So therefore, the name of Pb(NO3)2 of is Lead II trioxonitrate V
Learn more about a chemical compound:
https://brainly.com/question/26487468
#SPJ1
C4H4N2 lewis structure and formal charges minimized
The molecule is composed of two nitrogen atoms above and below the plane of four carbon atoms to which four hydrogen atoms are attached.
What is Lewis structure?The Lewis structure shows the arrangement of electrons in atoms of molecules. The molecule C4H4N2 is called pyrazine. It is composed of two nitrogen atoms above and below the plane of four carbon atoms to which four hydrogen atoms are attached.
The structure of the molecule C4H4N2 in which formal charges are minimized is shown in the image attached to this answer.
Learn more about Lewis structure:https://brainly.com/question/4144781
#SPJ1
What is the pH of a 0.0100 M sodium benzoate solution? Kb (C7H5O2-, ) = 1.5 x 10^-10
A) 0.38
B) 5.91
C) 8.09
D) 9.82
E) 13.62
The pH of a 0.0100 M sodium benzoate solution with a Kb of 1.5 × 10-¹⁰ is 5.91 (option B).
How to calculate pH?The pH of a solution in chemistry refers to the notation expressing the acidity or alkalinity of a solution.
The pH is measured on a logarithmic scale of which 7 is neutral, lower values are more acid and higher values more alkaline.
The pH of a solution can be calculated using the following formula;
pH = - log {H+}
pH = - log {0.0100}
pH = 2
Therefore, the pH of a 0.0100 M sodium benzoate solution with a Kb of 1.5 × 10-¹⁰ is 5.91.
Learn more about pH at: https://brainly.com/question/11300720
#SPJ1
If 48.0 g of iodine are reacted with an excess of phosphorus according to the following chemical equation:
2 P(s) + 3 I2(s) → 2 PI3(s)
Calculate the theoretical yield of PI3.
If the actual yield of PI3 is 50.0 g, what is the percentage yield?
Answer:
Theoretical Yield = 51.9 grams PI₃
Percentage Yield = 96.3% PI₃
Explanation:
To find the theoretical and percent yield of PI₃, you need to (1) convert grams I₂ to moles I₂ (via molar mass), then (2) convert moles I₂ to moles PI₃ (via mole-to-mole ratio from reaction coefficients), then (3) convert moles PI₃ to grams PI₃ (via molar mass), and then (4) calculate the percent yield. It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answers should have 3 sig figs to match the sig figs of the given values.
Molar Mass (I₂): 2(126.90 g/mol)
Molar Mass (I₂): 253.8 g/mol
Molar Mass (PI₃): 30.974 g/mol + 3(126.90 g/mol)
Molar Mass (PI₃): 411.674 g/mol
2 P(s) + 3 I₂(s) -----> 2 PI₃(s)
48.0 g I₂ 1 mole 2 moles PI₃ 411.674 g
--------------- x ----------------- x ---------------------- x ------------------ =
253.8 g 3 moles I₂ 1 mole
= 51.9 g PI₃
Actual Yield
Percentage Yield = --------------------------------- x 100%
Theoretical Yield
50.0 g PI₃
Percentage Yield = -------------------- x 100%
51.9 g PI₃
Percentage Yield = 96.3% PI₃
The valence electrons found in metallic bonds are different from other bonds
because
A. their valence electrons are immobile
B. they allow for the conductivity of electricity
c. they're able to share electrons with other atoms
D. their valence electrons are free-roaming
SUBMIT
Answer:
D.) their valence electrons are free-roaming
Explanation:
Metals tend to arrange themselves in crystalline structures once they form metallic bonds. The electrons around the positive nuclei are delocalized, and thus freely float within the structure. This is unique to metallic bonding.
Lactic acid has a pKa of 3.08. What is the approximate degree of dissociation of a 0.35 M solution of lactic acid?
The approximate degree of dissociation of a 0.35 M solution of lactic acid is 4,87%
What is degree of dissociation?The degree of dissociation is the quantity used to express the strength of a base, that is, its ability to conduct electric current, which depends on the amount of ions released in the dissociation.
The degree of dissociation (α) is another way of determining the strength of a base. It indicates the fatty acids that were released from a base when it dissociates in water.
With that being said, C stands for concentration and α is the the degree of dissociation.
Latic Acid can be written as C3H6O3
[tex]CH3Ch(OH)CO2H < -- > H^{+} + CH3CH(OH)CO2^{-}[/tex]
[tex]Ka = \frac{[H^{+}] [CH3CH(OH)CO2^{-}] }{CH#CH(OH)CO2H} = \frac{C^{2} \alpha^{2} }{C(1-\alpha )} = \frac{C\alpha ^{2} }{(1-\alpha )}[/tex]
As α is too small (1-α) can be neglected.
[tex]Ka = C\alpha ^{2} \\\\\\alpha = \sqrt[]{\frac{Ka}{C} }[/tex]
[tex]Ka = 10^{-3,08} = 8,32 .10^{-4} .10^{-4} = 0,35[/tex]
[tex]\alpha = \sqrt{\frac{ka}{C} } \\\\\alpha = \sqrt{\frac{8,32.10^{-4} }{0,35} } = 0,0487[/tex]
In this case, is possible to see that approximate degree of dissociation of a 0.35 M solution of lactic acid is 4,87%
See more about pKa at: brainly.com/question/14924722
#SPJ1
If you start with 4 moles of iron and 3 moles of oxygen to produce iron oxide, what is the limiting reagent? (You will need to balance the equation first.) Fe + O2 -> Fe2O3
A. they are equal
B.Fe
C. O2
D.Fe2O3
The correct statement regarding the limiting reactant for the reaction between 4 moles of iron and 3 moles of oxygen is: They are both equal. (Option A)
Balanced equationWe'll begin by writing the balanced equation for the reaction between iron and oxygen. This is given below:
4Fe + 3O₂ --> 2Fe₂O₃
SUMMARY
From the balanced equation above,
4 moles of Fe reacted with 3 moles of O₂
How to determine the limiting reactantThe limiting reactant is the reactant that is consumed completly in a chemical reaction.
The limiting reactant can be obtain as illustrated below:
From the balanced equation above,
4 moles of Fe reacted with 3 moles of O₂
From the illustration above, we can see that 3 moles of Fe required 4 moles of O₂ for complete reaction.
Thus, Fe and O₂ are both the limiting reactant.
Therefore, we can conclude that Fe and O₂ are equal
Learn more about stoichiometry:
brainly.com/question/11587316
#SPJ1
4NH3+5O2=4NO+6H20 if 32.5 grams of NH3 react with enough oxygen, how many grams of water should form?
51.3 gram of water should form if 32.5 g of NH₃ react with enough oxygen.
How to find the Number of moles ?To calculate the number of moles use the formula
Number of moles = [tex]\frac{\text{Given Mass}}{\text{Molar Mass}}[/tex]
= [tex]\frac{32.5}{17}[/tex]
= 1.9 mol
4NH₃ + 5O₂ → 4NO + 6H₂O
4 mol of NH₃ react with oxygen to given 6 mole of water.
So 1.9 mol of NH₃ produces = [tex]\frac{1.9}{4}\times 6[/tex]
= 2.85 mol of water
Mass of water = Molar Mass of water × Number of moles of water
= 18 × 2.85
= 51.3 gram
Thus from the above conclusion we can say that 51.3 gram of water should form if 32.5 g of NH₃ react with enough oxygen.
Learn more about the Moles here: brainly.com/question/15356425
#SPJ1
The protons of a __________ acid would be completely transferred to the solvent when dissolved.
Group of answer choices
inert
neutral
strong
weak
The protons of a strong acid would be completely transferred to the solvent when dissolved.
What is an acid?An acid is defined as a substance that contains hydrogen that it can donate when reacting with another substance.
There are two main types of an acid which include:
weak acids andstrong acids.A strong acid is a type of acid that has the ability to donate it's hydrogen/ protons completely in a chemical reaction.
Learn more about acids here:
https://brainly.com/question/25148363
#SPJ1
18. What is assigned a rating of 3 in the yellow diamond of the NFPA 704 symbol.
OA. Helium
OB. Sodium
OC. Ammonium nitrate
OD. Chlorine dioxide
4 and 5 pls and thank uuu
Answer:
4. -ol
5. cyclic ketone
Explanation:
biology stuff
sorry it's hard to explain
I need help with the solution
Answer:
1
Explanation:
The empirical formula describes the simplest whole number ratio of each type of atom in a compound. To find this formula, you need to (1) convert grams of each element to moles (via their atomic masses) and then (2) find the ratio of each element (by dividing each molar value by the smallest mole value).
(Step 1)
Atomic Mass (Zn): 65.380 g/mol
Atomic Mass (C): 12.011 g/mol
Atomic Mass (O): 15.998 g/mol
10.40 grams Zn 1 mole
------------------------ x ------------------------ = 0.159 moles Zn
65.380 grams
1.92 grams C 1 mole
--------------------- x ----------------------- = 0.160 moles C
12.011 grams
7.68 grams O 1 mole
---------------------- x ------------------------ = 0.480 moles O
15.998 grams
(Step 2)
0.159 moles Zn / 0.159 = 1 atom Zn
0.160 moles C / 0.159 = 1 atom C
0.480 moles O / 0.159 = 3 atom O
The empirical formula is Zn₁C₁O₃. Therefore, the value that should be in the space is 1.
A student measures the length of an object to be 152 cm. What is the measurement in km?
Answer:
0.00152 km
Explanation:
The easiest way to complete the conversion is by (1) converting cm to m and then (2) converting m to km. It is important to arrange the conversions in a way that allows for the cancellation of units.
1,000 m = 1 km
100 cm = 1 m
152 cm 1 m 1 km
------------- x -------------- x ---------------- = 0.00152 km
100 cm 1,000 m
[tex]\large\displaystyle\text{$\begin{gathered}\sf So \to \ \ 152\not{cm}*\frac{1 \ km}{100,000\not{cm}}=0.00152 \ km \end{gathered}$}[/tex]
Answer:Therefore, the measurement of the object in km is: 0.00152 Kilometers.
I hope my answer is useful to you
pls help question is above
a. The calories increase by 9:00 whenever the running speed goes up by two. so so if a dog were running at 10 km/h it would be 54 calories burnt
b. they are multiplied by 9
For the balanced equation: 2H2S + 3O2 → 2SO2 + 2H2O
How many moles of sulfur dioxide will be produced from the reaction of 12 moles of oxygen?
Answer:
8 moles SO₂
Explanation:
To find the moles SO₂, you need to multiply the given value by the mole-to-mole ratio. This ratio, between O₂ and SO₂, is made up of the coefficients from the balanced equation.
2 H₂S + 3 O₂ -----> 2 SO₂ + 2 H₂O
12 moles O₂ 2 moles SO₂
-------------------- x ---------------------- = 8 moles SO₂
3 moles O₂
Write the balanced molecular equation for the aqueous reaction of hydroiodic acid (HI) and zinc metal.
The balanced chemical equation is for the aqueous reaction of hydroiodic acid (HI) and zinc metal is Zn + 2HI → ZnI₂ + H₂.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
Now write the balanced chemical equation
Zn + 2HI → ZnI₂ + H₂
Here Zn is a reducing agent, HI is an oxidizing agent.
Thus from the above conclusion we can say that The balanced chemical equation is for the aqueous reaction of hydroiodic acid (HI) and zinc metal is Zn + 2HI → ZnI₂ + H₂.
Learn more about the Balanced Chemical Equation here: brainly.com/question/26694427
#SPJ1
How to convert butanoic acid to propanamide?
Butanoic acid is converted to propanamide by first converting it to propanoic acid, then ammonium propanoate and then finally propanamide by heating.
How are carboxylic acids converted to amides?Carboxylic acids are converted to amides by converting them into into an ammonium salt which then produces an amide on heating.
The ammonium salt is prepared by adding ammonium carbonate to an excess of the acid. The ammonium salt is then heated to give the amide
Therefore, butanoic acid is converted to propanamide by first converting it to propanoic acid, then ammonium propanoate and then finally propanamide by heating.
In conclusion, carboxylic acids are converted to amides in two steps.
Learn more about carboxylic acids and amides at: https://brainly.com/question/9616270
#SPJ1
Hi I need help with the Lab report for the 'Flame Lab' in edge
Flame test is a qualitative test which is used to identify the metal and metalloid ion in the sample.
What is Flame Test ?A Flame test is used to identify the metal and metalloid ion in the sample. Flame test is a qualitative test. Not every metal ion emit color when it is heated in the gas burner.
What is the Purpose of Flame test ?The purpose of flame test is used to find the identities of ions in two solutions of unknown composition by comparing the colors they produce.
What are the material used ?Bunsen Burner MatchesGlovesWeighing dishes BeakersThus from the above conclusion we can say that Flame test is a qualitative test which is used to identify the metal and metalloid ion in the sample.
Learn more about the Flame test here: https://brainly.com/question/864891
#SPJ1
Which scenario would be classified as a conceptual model?
A. A student thinks of bouncing balls as representing gas molecules.
B. Marshmallows and toothpicks are used to show the composition
of a water molecule.
C. A map and a map scale are used to represent a larger area of land.
D. A weather map shows different temperatures over most of the
United States.
The correct answer is A. A student thinks of bouncing balls as representing gas molecules.
What is molecules?When one effectiveness liquefies into another, a resolution is formed. A solution is a homogenous mixture consisting of a solute liquefied into a solvent. The solute is the substance that is being dissolved, while the solvent is the dissolving medium.
Solutions can be formed with numerous different varieties and forms of solutes and solvents. In this department, we will focus on a solution where the solvent is water. An aqueous solution is moisture that contains one or more additional dissolved essence. The dissolved importance in an aqueous resolution may be solids, gases, or different liquids.In directive to be a true explanation, a variety must be stable. When sugar is fully dissolved into water, it can stand for an indefinite quantity of time, and the sugar will not recompense out of the solution. Further, if the sugar-water solution is passed through a filter, it will remain with the water. This is because the liquefied particles in a solution are very small, usually smaller than 1nm in diameter. Solute particles can be particles, ions, or molecules, counting on the classification of nature that has been dissolved.To learn more about molecules, refer to:
https://brainly.com/question/26044300
#SPJ9
How many molecules of zinc oxide are there in a 2 kg sample?
There are 1.48 × 10²⁵ molecules of zinc oxide in a 2 kg sample. Details about number of molecules can be found below.
How to calculate number of molecules?The number of molecules of a substance can be calculated by multiplying the number of moles of the substance by Avogadro's number.
According to this question, there are 2000g of ZnO in a sample. Zinc oxide has a molar mass of 81.38 g/mol.
no of moles = 2000g ÷ 81.38g/mol
no of moles = 24.57mol
number of molecules = 24.57 × 6.02 × 10²³
number of molecules = 147.95 × 10²³
Therefore, there are 1.48 × 10²⁵ molecules of zinc oxide in a 2 kg sample.
Learn more about number of molecules at: https://brainly.com/question/11815186
#SPJ1
A liquid has q voulume of 34.6 mL and a mass of 46.0g ehat is the density of the liquid
Answer:
1.33 g/mL
Explanation:
The density of a substance can be calculated using the following formula:
Density = mass (g) / volume (mL)
Since you have been given both the mass and volume, you can easily calculate the density of the liquid.
Density = mass / volume
Density = 46.0 g / 34.6 mL
Density = 1.33 g/mL
Determine the molecular shape of each of the following species.
Answer:
See-saw
Explanation:
To determine the molecular shape of BrF₄⁺, you need to
1.) Calculate the valence electrons of BrF₄⁺
----> Add the valence electrons of each individual atom
----> Take the positive charge into account (subtract 1 electron)
2.) Draw the Lewis Dot diagram of BrF₄⁺
----> Each bond has 2 electrons
----> Bromine can have an expanded octet
3.) Determine the molecular shape of BrF₄⁺