workers can finish the job in days. For the first days, only workers worked on the job. Then for the next days more workers joined them. To finish the job, more workers joined them. After how many days was the whole job done?

Answer: c lower your mortgage interest rate

Step-by-step explanation

The higher your credit score, the less risk you represent for a lender.

My dad taught me this.

Answer:

3,10,8,5,4,1,7,2,9,6

Step-by-step explanation:

Answer:

375 mL

Step-by-step explanation:

Let x = Amount of fluid patient receives in 3 hours

Fluid drip rate: 1000 mL --------- 8hr

                                x        --------- 3 hr

Cross multiplication is applied:

(x).(8 hr) = (1000 mL).(3hr)

x = [(1000mL).(3 hr)]/ (8 hr)

x = 375 mL

The point of intersection of the line [tex]y = x + 1[/tex] and the circle with radius 4 and center [tex](0,1)[/tex] is [tex](x, y) = (-1, 0)[/tex] which is in the first quadrant.

The equation of a circle with center (h, k) and radius r is:

[tex](x - h)^2 + (y - k)^2 = r^2.[/tex]

The equation of the line is given as [tex]y = x + 1[/tex].

Given the center of the circle is (0,1) and the radius is 4, the equation of the circle is [tex](x-0)^2 + (y-1)^2 = 4^2[/tex]

This can be simplified as [tex]x^2 + y^2 - 2y + 1 = 0[/tex]

Now we can substitute [tex]y = x + 1[/tex] in the circle equation:

[tex]x^2 + (x+1)^2 - 2(x+1) + 1 = 0\\x^2 + x^2 + 2x + 1 + 2x + 1 = 0\\2x^2 + 4x = -2\\x^2 + 2x = -1\\(x+1)^2 = 0\\x = -1[/tex]

Now that we have the value of x, we can substitute it in the equation [tex]y = x + 1[/tex]  to find the corresponding y value:

[tex]y = -1 + 1\\y = 0[/tex]

So, the point of intersection of the line [tex]y = x + 1[/tex] and the circle with radius 4 and center (0,1) is [tex](x, y) = (-1, 0)[/tex] which is in the first quadrant.

To know more about  point of intersection visit: https://brainly.com/question/29188411

#SPJ1

On observing the provided question, we can say that the the provided equation f(x) =  is the basic cubic function.f(x) = 8100

An statement, rule, or law in mathematics that specifies the connection between an independent variable and a dependent variable (the dependent variable). A relationship between a group of inputs and one output each is referred to as a function. In plain English, a function is an association between inputs in which each input is connected to precisely one output. Y=X2 is an illustration of this. You only receive one output for y if you enter anything for x. The fact that x is the input value leads us to argue that y is a function of x.

basic cubic function is =  f(x) = x^2

x =  90

f(x) = 8100

To know more about functions visit:

brainly.com/question/28193995

#SPJ1

On solving the provided question, we can say that It is possible to construct a parking lot since the angle J's measurement is 180 - (50 + 90) = 40. More than 38 degrees, 40 degrees.

An angle is a form in Euclidean geometry made composed of two rays, called the angle's sides, that meet at a point in the middle known as the angle's vertex. In the plane where the rays are placed, two rays can produce an angle. An angle is also produced when two planes intersect. They're known as dihedral angles. In plane geometry, an angle is the form that two rays or lines with a common termination might take. The Latin word "angulus," which means "horn," is where the English word "angle" comes from. The two rays, also known as the sides of the angle, have a common termination known as the vertex.

It is possible to construct a parking lot since the angle J's measurement is 180 - (50 + 90) = 40. More than 38 degrees, 40 degrees.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

Answer:

Yes

Step-by-step explanation:

Let's calculate the resistance of one inch for our wire and compare it with the maximum:

20250 / 25 = 810 Ohm

810 < 840 ? Yes!

Yes, this is within the acceptable limit. Wire can be used.

Answer: oh easy its 1220703250

Step-by-step explanation:

Answer:

9

Step-by-step explanation:

X= -2, substitute -2 for X in the function

-(-2)+7, = 2+7

=9

Answer:150

Step-by-step explanation:

Answer:

150

Step-by-step explanation:

since half of 100 is 50, 2 classes will have 50 minutes. If you add 100+50 you get 150. So therefore ur answer is 150!

The product of the two numbers  45, is the highest number, and the sum of the two numbers  18, is the lowest number follow symmetry .

When an object is split into two identical, mirrored components, it is said to have symmetry in mathematics. What does "axis of symmetry" refer to? An "axis of symmetry" is a fictitious line that has the ability to fold or split a thing into two identical mirror parts. Any object is symmetrical if two parts fit together. To determine the shape's symmetry, draw a mirror line across the center, making sure that all parts are identical. Another way of putting it is that symmetry is when two objects are facing one another or when two items have mated components that circle around an axis.

given

The two numbers on the left and right are multiplied together to create the number at the top.

The two digits on the left and right add up to the number at the bottom.

middle number + top number = 3 * 15 = 45 ( top number )

3+15 Equals 18 ( lowest number ) ( bottom number )

The product of the two numbers on the left and right, 45, is the highest number, and the sum of the two numbers on the left and right, 18, is the lowest number.

To know more about symmetry visit:

https://brainly.com/question/1597409

#SPJ1

The complete question is :-

Here is a completed box challenge puzzle. If you look at it closely, you'll see that the number at the top is the product of the two numbers on the left and right, and the number at the bottom is the sum of the two numbers on the left and right.

A simulation of 200 trials is run, each with a sample size of 100 and a point estimate of 0.62=0.08 to establish the margin of error for this statistic.

Your results will vary from the actual population value by how many percentage points, as indicated by the margin of error.

A 95% confidence interval with a 4% margin of error, for instance, indicates that your statistic will, 95% of the time, be within 4% of the true population figure.

However, the official definition goes a little bit beyond. The range of values in a confidence interval that lie below and above the sample statistic is known as the margin of error.

The confidence interval is a tool for displaying the level of uncertainty surrounding a certain statistic (i.e. from a poll or survey).

According to our question-

Because the sample proportions' range is 0.97-0.73 = 0.24

Calculate the standard deviation:

Range = 6* (s-bar)

= 0.24

s-bar = 0.04

S/Sqrt (100) then equals 0.04

and s = 0.4

S.D = 0.04 + 0.04

= 0.08

Hence, A simulation of 200 trials is run, each with a sample size of 100 and a point estimate of 0.62=0.08 to establish the margin of error for this statistic.

learn more about margin of error click here:

https://brainly.com/question/10218601

#SPJ1

Answer:

The measure of 21 and 22 doesn't make sense as they are not specific angles and they are not defined as to what angle you are refering to.

Without proper context and information, I am unable to provide an accurate answer to your question. Can you please provide more context, or explain what exactly you are trying to ask ?

Step-by-step explanation:

T-test for independent groups analyzes the difference between the means of two independent samples. Hence, option B is the correct answer.

B. T-test for independent groups is the test that analyzes the difference between the means of two independent samples. This test assumes that the two samples are drawn from populations that have normal distributions and that the variances of the two populations are equal. The T-test for independent groups compares the means of the two samples and determines if there is a statistically significant difference between them. This test is also known as a two-sample T-test or independent T-test.

The other options A and C are not the correct ones.

A. Correlated T-Test is used when comparing means of dependent samples, it's also known as a dependent t-test

C. Sign test is a non-parametric test that is used to compare two dependent samples.

Read more about Sample space:

brainly.com/question/2117233

#SPJ4

The sets of numbers that could represent three sides of a triangle is given as follows:

{12, 18, 29}.

In a triangle, the sum of the lengths of the two smaller sides has to be greater than the length of the greater side.

Hence the set in this problem is given as follows:

{12, 18, 29}.

The larger measure is of:

29.

The sum of the two smaller measures is given as follows:

12 + 18 = 30.

More can be learned about triangles at https://brainly.com/question/30203256

#SPJ1

a) The probability of eating at a restaurant with unsanitary conditions is 3/7. If you plan to eat at 10 different restaurants, the probability of eating at exactly 3 restaurants with unsanitary conditions is given by the binomial probability formula:

P(X = 3) = (10 choose 3) * (3/7)^3 * (4/7)^7 = 120 * (0.42857)^3 * (0.57143)^7 = 0.1437

So, the likelihood of eating at three restaurants with unsanitary conditions is 14.37%.

b) The probability of eating at 4 or 5 restaurants with unsanitary conditions can be found by summing the binomial probabilities for each case:

P(X = 4) = (10 choose 4) * (3/7)^4 * (4/7)^6 = 210 * (0.42857)^4 * (0.57143)^6 = 0.1735

P(X = 5) = (10 choose 5) * (3/7)^5 * (4/7)^5 = 252 * (0.42857)^5 * (0.57143)^5 = 0.1428

P(X = 4 or X = 5) = P(X = 4) + P(X = 5) = 0.1735 + 0.1428 = 0.3163

So, the likelihood of eating at 4 or 5 restaurants with unsanitary conditions is 31.63%.

c) The probability of eating in at least one restaurant with unsanitary conditions can be found by subtracting the probability of eating in no restaurants with unsanitary conditions from 1. The probability of eating in no restaurants with unsanitary conditions is given by the binomial probability formula:

P(X = 0) = (10 choose 0) * (3/7)^0 * (4/7)^10 = 1 * (1) * (0.57143)^10 = 0.0139

P(X >= 1) = 1 - P(X = 0) = 1 - 0.0139 = 0.9861

So, the probability of eating in at least one restaurant with unsanitary conditions is 98.61%.

d) The most likely number is 3, as it has the highest probability of occuring.

e) The data is not very variable around the most likely number, as the probability of the other numbers is relatively low.

f) Yes, this is a binomial distribution as the experiment has only two possible outcomes, "success" (eating at a restaurant with unsanitary conditions) or "failure" (eating at a restaurant with sanitary conditions) and the number of trials is fixed (10)

g) No, the likelihood of success is not always 50% in a binomial distribution. The probability of success is given by the proportion of successful trials in the population, which in this case is 3/7.

Answer:

The equation 10x2+28x-6 can be simplified using a few steps. Firstly, the greatest common factor (GCF) needs to be identified. The GCF of this equation is 2, which can be identified by factoring out the coefficient of the first term, 10. After factoring out 2, the equation becomes -3 + -14x + 5x2.

The next step is to factor the remaining polynomial. This can be done by multiplying the coefficient of the first term by the constant and then finding two factors whose sum equals the coefficient of the middle term. In this case, the multiplication of the coefficient of the first term (5) and the constant (-3) gives -15. Then, two factors of -15 whose sum adds up to -14 must be found. These factors are -15 and 1. Therefore, the equation can be rewritten as 5x2 - 15x + 1x - 3.

Afterwards, the four terms in the equation can be added up in pairs, pulling out like factors. This results in (5x+1)(x-3), which is the desired factorization. Finally, the expression can be written as 2(x-3)(5x+1). Thus, the GCF of 10x2+28x-6 is 2.

Step-by-step explanation:

Answer:

2 is the answer .

if u r not sure u can try doing it yourself

the answer will be the same as I told

The exact distance from home plate to second base on a baseball diamond is √16,200 feet. To convert this distance to decimal form, we must first understand the concept of a square root and how it relates to the distance formula.

A square root is a mathematical operation that represents the value whose square is equal to a given value. In this case, the square root of 16,200 is equal to the distance from home plate to second base.

To find the decimal form of the square root of 16,200, we can use a calculator or we can use the long division method. With a calculator, we simply input √16,200, which will give us the result of 126.84955592153876

To round to the nearest hundredth we look at the hundredths digit (8) if it's 5 or above we round up otherwise we round down so 126.84955592153876 rounded to the nearest hundredth is 126.85

The distance from home plate to second base on a baseball diamond is 126.85 feet in decimal form.

It's worth noting that the distance from home plate to second base is a critical aspect of the game and it's really important for the catcher to make a quick and accurate throw to second base.

There will be n linear factors of a polynomial function f of degree n

We derive the above answer based on the following explanation,

The Linear Factorization Theorem states that . . . if f(x) is a polynomial of degree n, where n > 0, then f has precisely n linear factors f(x) = an(x – c1)( x – c2) . . . (x – cn) where c1, c2, . . . , cn are complex numbers.

Let us assume f to be a polynomial function with real coefficients and suppose a+bi, b≠0, is a zero of f(x). Then, by the Factor Theorem, x−(a+bi) is a factor of f(x). For f to have real coefficients, x-(a−bi) must also be a factor of f(x). This is true because any factor other than x−(a−bi) when multiplied by x−(a+bi), will leave imaginary components in the product. Only conjugate pair multiplication will get rid of the imaginary components and produce real coefficients.

Read more about Polynomial functions from:

https://brainly.com/question/30070005

#SPJ4

The x-intercept is the point where the graph of a line intersects the x-axis. The y-intercept is the point where the graph of a line intersects the y-axis.

Given data :

y = ( 2 / π )²

y = 2² / π²

y = 4 / π²

Here i attached the graph of x interception

Learn more about x intercept refer to :

https://brainly.com/question/17932786

#SPJ1

The dimension of Nul A = 0 and the dimension of Col A = 4. means that the matrix A has no solutions for the homogeneous equation A × x = 0, which means that its null space is trivial, and it has 4 linearly independent columns, which means that its column space is 4-dimensional.

In other words, it is the number of linearly independent vectors x that satisfy the equation Ax = 0.

The dimension of Col A, also known as the column space of the matrix A, is the dimension of the subspace spanned by the columns of the matrix A. In other words, it is the number of linearly independent columns of matrix A.

In general, it is not possible to determine the dimensions of Nul A and Col A of a matrix just by looking at its elements. In order to find the dimensions, we need to perform the row echelon form or reduced row echelon form of the matrix to find the rank and the nullity which is the difference in the number of columns and rank.

For the specific matrix A provided, the rank of the matrix is not provided, thus we can not determine the dimension of the Nul A and Col A.

To learn more about the matrix at

https://brainly.com/question/17081673?referrer=searchResults

#SPJ4

The equation for the magnitude of the acceleration of the system is equals to the

a = g (m₂ - m₁μ꜀ cosθ - m₁sinθ )/(m₁ + m₂ ).

We have, two blocks with masses say m₁ = 3.8 kg and m₂ = 8.6 kg inclined on the plane at angle θ=39° above the horizontal. Also, cofficient of friction, μ=0.39. According to problem, In case of block 1 , accelerate up the inclined plane, Then forces along y-axis,

Net force during vertical motion = 0

=> Fₙ - m₁gcosθ = 0 --(1)

On horizontal direction,

Again net force = 0

=> T - f꜀ - m₁gsinθ = m₁a --(2) ( using Newton's second law)

For block 2, Vertical motion

So, net vertical force = 0

=> - T + m₂g = m₂a --(3)

Now, f꜀ = μ꜀ Fₙ= μ꜀ m₁g cosθ

so, T - μ꜀ m₁g cosθ - m₁gsinθ = m₁ a --(4)

Using the equation (4) and (3), we have to determine the equation for acceleration, a.

Adding (3) from (4),

m₁ a + m₂a = -μ꜀ m₁g cosθ - m₁gsinθ + m₂g + T - T

=> (m₁ a + m₂a) = g ( -m₁cosθ - m₁ sinθ + m₂)

=> a ( m₁ + m₂ ) = g (-m₁μ꜀ cosθ - m₁ sinθ + m₂)

=> a = g (- m₁μ꜀ cosθ - m₁sinθ + m₂)/(m₁ + m₂ )

by plugging all the above values we can calculate the magnitude of acceleration.

Hence, required equation is a = g (m₂ - m₁μ꜀cosθ - m₁sinθ)/(m₁ + m₂) .

To learn more about inclined plane, refer:

https://brainly.com/question/26262923

#SPJ4

Complete question:

Referring to the image to the above figure , the mass of block 1 is m1=3.8 kg while the mass of block 2 is m2=8.6 kg. The coefficient of friction between m1 and the inclined surface is μ=0.39. The inclined surface is at an angle θ=39∘ above the horizontal. Using the variables from the problem statement together with the acceleration due to gravity, g , write an equation for the magnitude of the acceleration of the system. hint: based upon the numeric choices, block 1 will accelerate up the incline while the suspended block, block 2, accelerates vertically downward.

Using mathematical operations, we can say that only 1 brand has less than 1/4 grams of sodium per cup which is Crispy Flakes.

An operation is a function in mathematics that transforms zero or more input values into a clearly defined output value.

The operation's arity is determined by the number of operands.

Basic arithmetic operations or calculations, such as addition, subtraction, multiplication, and division, are covered in Fundamentals of Mathematics and are concepts we learn in primary school.

Students will eventually study fundamental ideas like algebra, geometry, factors, ratios, etc. in upper classes.

So, we have that:

Crispy Flakes have 0.23 grams of sodium per cup.

Corn Puffers have 0.28 grams of sodium per cup.

Energy Doodles have 0.26 grams of sodium per cup.

Now, brands that have less than 1/4 gram of sodium per cup:

100 * 1/4 = 25

Then, 1/4 of 1.00 = 0.25

0.23 > 0.25

Therefore, using mathematical operations, we can say that only 1 brand has less than 1/4 grams of sodium per cup which is Crispy Flakes.

Know  more about mathematical operations here:

https://brainly.com/question/28937023

#SPJ1

x = 5

7x+8=43

First, we want to separate the variable, so we subtract 8 from both sides:
7x=35

Then we divide both sides by 7 to get x all by itself:

x=5

This is because 35/7=5

The value of y is 6 and the length of RS and ST are 28, 26 respectively.

What is a line ?

line is a straight one dimensional figure having no thickness is called as the line.

Given , number lines

RS = 4y+4

ST = 3y+8

RT = 54

From the given figure ,

RS+ST = RT

4y+4+3y+8 = 54

7y+12 = 54

7y = 54-12

7y = 42

y =42/7

y = 6

The RS = 4y+4 = 4*6+4 = 28

ST = 3y+8 = 3*6+8 = 26

Hence, The value of y is 6 and the length of RS and ST are 28, 26 respectively.

To learn more about line from the given link.

https://brainly.com/question/29176531

#SPJ1

Answer:

Step-by-step explanation:

L = 4 in real life = 4*30 =120 miles

W=6 in real life =6*30=180 miles

actual area = 120*180 = 21600sq miles

to fit into a 6sq in paper it'll need to shrink to 2x3 inches, 1/2 of what it was before, so the scale becomes 1" for every 60miles.

In step 2 the addition property of equality was applied. Thus, the correct option is A.

When the same amount is added to both sides of an equation, according to the addition property of equality, the equation remains the same. An equation that reads as A = B still holds true if a number x is added to both sides. The equation is A + x = B + x in mathematics.

When the same amount is added to both sides of an equation, the equation remains true, which is known as the addition property of equality. One of the basic characteristics of equality in mathematics, it is also very significant. The division, multiplication, and addition properties of equality are the additional characteristics.

Learn more about addition property of equality

https://brainly.com/question/30148588

#SPJ1

Full question:-

Select the correct answer. The given equation has been solved in the table. (see attachment)

The rate of change for the interval between –6 and –3 on the x-axis is; 2

To find the rate of change  for the interval between –6 and –3 on the x-axis, we will first identify the ordered pairs at those two points. The ordered pairs from the graph would be (3, -2) and (6, 4).

Using the slope formula with those two points, we can find the rate of change as;

slope; m = (y₂ - y₁)/(x₂ - x₁)

m = (4 + 2)/(6 - 3)

m = 6/3

m = 2

This value of m represents the rate of change

Read more about rate of change at; https://brainly.com/question/8728504

#SPJ1

-2 is the answer i cant exaplin it bc i jsut guessed and got it right