with what tension must a rope with length 2.50 m and mass 0.120 kg be stretched for transverse waves of frequency 40.0 hz to have a wavelength of 0.750 m?

The thing that will  probably happen if you tried to bake bread without using yeast is that dough may not rise as tall as you're used to because of the lackof the yeast composition in the dough.

Lemon juice and baking soda mixed in equal parts can be used as a substitute for yeast. So, if a recipe calls for 1 teaspoon of yeast, you can use 1/2 teaspoon each of baking soda and lemon juice. Remember that the dough will start rising immediately, and the bread won't need to prove for the usual amount of time.

You could find that your dough doesn't rise as much as usual and that the flavor and texture are different. However, these alternatives are definitely worth investigating if you run out of yeast, don't have time to wait for bread to rise, or are attempting to eliminate yeast from your diet for health reasons.

Learn more about yeast at:

https://brainly.com/question/22972098

#SPJ1

The speed of the child is 14.28 m/s at the bottom of the hill.

Energy cannot be created or destroyed, according to the law of conservation of energy. However, it is capable of change from one form to another. An isolated system's total energy is constant regardless of the types of energy present.

Initial potential energy = final kinetic energy

mass × acceleration of gravity × height = 1/2 × mass × speed²

Speed = √( 2 × 9.81 m/s² ×10.4 m)

Speed = 14.28 m/s

So, the speed of the child is 14.28 m/s at the bottom of the hill.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ1

Helium is the only element in group 18 that is a noble gas. It does not react with other elements and does not form compounds.

Noble gases are a group of elements found in the periodic table that are known for their inertness, or resistance to chemical reactions. They are the most stable elements in their respective rows. The noble gases are helium, neon, argon, krypton, xenon, and radon. They have all been discovered in nature, though some only in trace amounts. Noble gases have unique atomic structures, with their outermost electron shells completely filled with electrons.

Helium also has the lowest boiling point and melting point of the elements in group 18. In comparison to the other elements in group 18, helium is the lightest and least dense.

To learn more about noble gas
https://brainly.com/question/18355529
#SPJ4

The only exception is Mars, which is noticeably less brilliant at opposition compared to how apparent the other planets are on Earth.

To learn more about planets refer to:

https://brainly.com/question/30221674

#SPJ1

The frequency of the damped oscillation is 24.6 Hz

The equation for frequency of the damped oscillation is as follows:

f = (1 / (2 × π)) × √((k - (b² / 4 × m)) / m)

where "π" is a mathematical constant approximately equal to 3.1415, "k" is the spring constant, "m" is the mass of the sphere, and "b" is the damping coefficient.

f = (1 / (2 × π)) × √((2.4×10⁴ N/m - (3.00 Ns/m² / 4 × 8.00 kg)) / 8.00 kg)

f = (1 / (2 × π)) × √((2.4×10⁴ N/m - (3.00 Ns/m² / 4 × 8.00 kg)) / 8.00 kg)

f = (1 / (2 × π)) × √((2.4×10⁴ N/m - (3.00 Ns/m² / 4 × 8.00 kg)) / 8.00 kg)

f = (1 / (2 × π)) × √(24000 - (3/32)) N/kg

f = (1 / (2 × π)) × √(23997) N/kg

f = (1 / (2 × π)) × 153.26 N/kg

f = 24.6 Hz

Therefore, the frequency of the damped oscillation is 24.6 Hz

To learn more about oscillation visit: https://brainly.com/question/12622728

#SPJ4

Your question seems to be missing, but I suppose the question was:

"A metal sphere with a mass of 8. 00 kg oscillate at the end of a vertical spring with a spring constant of 2. 40 ✕ 10^4 N/m. The motion is damped by air resistance, and the damping coefficient is b = 3. 00 Ns/m. Calculate the frequency of the damped oscillation."

Deceleration of 1/6 m/s2

Initial Velocity(u) = 25m/s

Final velocity(v) = 0 m/s

Time taken in reaching velocity 0 (t) = 150 s

so as we know from the equation of 2 dimension motions that

So  

As we know that the acceleration is negative so we can conclude that it is a deceleration of 1/6 meter per second square. In the given Question, the information of Fifty - car train has no use in solving acceleration or deceleration.

Acceleration is always Positive as it Increases the speed of the body but Deceleration is negative as it for reducing the speed.

Read more about Acceleration: https://brainly.com/question/460763

In accordance with the conservation of momentum law the 8-ball's final speed after a collision is 0.51 m/s.

momentum is the result of a particle's mass and velocity. Being a vector quantity, momentum possesses both direction and magnitude.

Given data :

Mass of cue ball(m1) = 0.17 kg

Mass of 8-ball(m2) = 0.16 kg

Initial speed of cue ball (u1) = 0.48 m/s

Initial speed of 8-ball (u2) = 0 m/s

Final speed of cue ball (v1) = 0 m/s

Final speed of 8-ball (v2) = v2 m/s

The total momentum before and after a collision is equal, according to the conservation law of momentum.

Hence,

m1u1 + m2u2 = m1v1 + m2v2

0.17 × 0.48 + 0.16 × 0 = 0.17 × 0 + 0.16 × v2

0.0816 + 0 = 0 + 0.16v2

0.0816 / 0.16 = v2

0.51 m/s = v2

v2 = 0.51 m/s

To know more about momentum visit :

https://brainly.com/question/24030570

#SPJ1

(a) The rate of change of momentum of the water is 333.33 kgm/s².

(b) The force exerted by the building against the water is -333.33 N.

(c) The force exerted by water against the building is 333.33 N.

The rate of change of momentum of the water is calculated by applying the following equation as shown below.

ΔP/t = mv / t = (m/t)v

where;

ΔP/t = ( 1000 kg x 20 m/s ) / ( 1 min x 60 s )

ΔP/t = 333.33 kgm/s²

Based on Newton's third law of motion, action force and reaction force are equal and opposite. If the water exerts a certain force against the building, the building will exert equal and opposite force against the water.

The force exerted by water against the building, F = ma = (mv) / t

F = (mv) / t = 333.33 N

The force exerted by the building against the water;

F = - 333.33 N

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

Iron filings arrange around a U-shaped magnet because of the magnetic field generated by the magnet. The magnetic field creates invisible lines of force that extend out from the north pole of the magnet to the south pole. The iron filings align themselves along these lines of force, which form a pattern that is often described as "field lines." The U-shaped magnet has two poles, north and south, and the field lines extend from the north pole to the south pole, passing through the center of the U-shape. The filings align along these lines of force, forming a pattern that is often described as "field lines". As the filings come in contact with the magnetic field, they align in a pattern that is determined by the strength and direction of the magnetic field.

Hope This Helps You!

The current (I3) flowing through resistor three is not provided with the given information. To find the current, we would need the value of the total resistance (RT) which is not provided. Additionally, we would also need the value of R₁ and R₂ to calculate the total resistance.

A resistor is a passive electrical component that resists the flow of electrical current, reducing the current flowing through a circuit. They are often used to limit the current in a circuit, distribute power, or to adjust the voltage level in a circuit. They can be made of various materials such as carbon, metal film, and metal oxide, and are characterized by their resistance value measured in ohms (Ω).

Learn more about resistor in brainly.com/question/24297401

#SPJ1

Answer:

222.222m/s

Explanation:

Convert 800 km per hour to m/s

[tex] \frac{800km}{hr \\ } = \frac{800 \times 1000m}{60 \times 60sec} [/tex]

[tex] \frac{8 \\ 00000m}{3600s} [/tex]

[tex] = 222.22222 m {s}^{ - 1} [/tex]

i hope this helps

Answer: the process by which businesses or other organizations develop international influence or start operating on an international scale.

Explanation:

Answer:

Globalization is the free movement of goods, services and people across the world in a seamless and integrated manner. Globalization can be thought of to be the result of the opening up of the global economy and the concomitant increase in trade between nations.

hope that helps

The total work required to increase the speed of the mass to 11.5 meters per second is 67.5 Joules.

Speed is the rate of motion, velocity, or the rate of change of position in a given period of time. It is a measure of how quickly an object or person moves from one place to another. Speed is usually measured in units such as meters per second (m/s), kilometers per hour (km/h), or miles per hour (mph). Speed is an important factor in many sports, such as running, cycling, swimming, and racing. It also plays a role in everyday activities such as driving, walking, and getting around. Speed is a key factor in safety, as it can help people stay ahead of potential risks and hazards.

The total work that must be done on the mass is given by the equation W = F x d,
Where W is the work done,
F is the net force applied,
and d is the displacement.

In this case, the displacement is the change in velocity, or 4.5 meters per second.
The force needed to accelerate the mass to 11.5 meters per second is given by the equation F = m x a,
where m is the mass (15 kilograms) and a is the acceleration (4.5 meters per second2).
Therefore, the total work required to increase the speed of the mass to 11.5 meters per second is W = 15 x 4.5 = 67.5 Joules.

To learn more about speed
https://brainly.com/question/3004254
#SPJ4

According to the given statement The planes must be flying away from each other.

It is a characteristic of things, of substance. All matter is drawn to all other matter, to put it simply. The stronger the attraction between things, the more substance there is, and also the closer together the items are. Gravity constantly draws objects together, unlike power and magnetism, which may either attract or repel.

Regarding the law of attraction, the concept of universal gravitation is a theory, not an established reality. It is important to approach this information with only an open mind and to thoroughly read through and think about it. In spite of the fact that it is not even a good hypothesis, the General Theory of Gravity is frequently taught in schools as truth.

To know more about Gravitational attractions visit:

https://brainly.com/question/19822389

#SPJ4

The complete question is -

Two airplanes are flying in the sky in such a way that the gravitational attractions between them decreases ?

The magnetic field between the magnets causes the charged particles within the wire to move.

Option D is correct

A magnetic field is described as a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials.

Faraday's law of electromagnetic induction sates that whenever their is a relative motion of a conductor is magnetic field, an emf will be induced in the conductor and the strength of the induced emf is directly proportional to the rate of change of magnetic flux linking the circuit.

Therefore,  motion of the electrons is due to magnetic field created by the permanent magnet of the electric generator.

Learn more about electric fields at: https://brainly.com/question/14372859

#SPJ1

Complete question:

In an electric generator a turning loop of wire placed between two permanent magnets causes electromagnetic induction in the wire. which sentence best explains the effect of the turning loop of wire in an electric generator.

A. The magnets cause charged particles within the wire to move as the poles of the magnets switch.

B. The moving electrons flow from the permanent magnets into the loop of wire.

C. The magnetic field of each magnet attracts the metal in the moving loop of wire.

D. The magnetic field between the magnets causes the charged particles within the wire to move.

The amount of energy emitted by the light bulb is 600J.

Efficiency is the extent to which a resource is used for the intended purpose; the ratio of useful work to energy expended.

According to this question, a light bulb is 40% efficient. If it is supplied with 1000 joules of electrical energy, the amount of energy emitted can be calculated as follows:

40% of 1000J = 400J of energy used.

This means that 1000J - 400J = 600J of energy will be emitted.

Learn more about efficiency at: https://brainly.com/question/11752408

#SPJ1

Where, a is the acceleration of the car at the top of the loop. Thus, the minimum speed required to safely make it through the loop is about 12.12m/s 12.12 m / s .

To learn more about roller coaster refer to:

https://brainly.com/question/14145643

#SPJ1

The mechanical advantage of the screwdriver is 0.208.

Mechanical advantage is the ratio of the output force produced by a machine (especially a simple machine) to the applied input force.

The efficiency of a simple machine is determined by calculating their mechanical advantage (MA). Mechanical advantage is a measure of the force amplification attained by the machine.

According to this question, the screwdriver has a radius from the center to the outermost edge of the tip of 50.0 mm, and the radius of the handle of 240 mm. The mechanical advantage can be calculated as follows:

M.A = 50/240

M.A = 0.208

Therefore, 0.208 is the mechanical advantage of the simple machine.

Learn more about mechanical advantage at: https://brainly.com/question/6968974

#SPJ1

The percentage of body weight that is made up of fat when compared to your other tissue, bone and muscles is called body composition.

Body composition refers to the proportion of fat, muscle, bone, and other types of tissue in the body. It is often expressed as a percentage of body weight that is made up of fat. Body composition can be measured using various methods such as skinfold thickness measurements, bioelectrical impedance, and dual-energy x-ray absorptiometry (DXA).

A healthy body composition is generally considered to be one with a low percentage of body fat and a high percentage of muscle mass. It is important to note that body composition is not the same as body weight, as two individuals can weigh the same but have very different body compositions. An imbalance in body composition can lead to health issues such as obesity and increased risk of chronic diseases. Regular exercise and a healthy diet can help to maintain a healthy body composition.

To learn more about body composition visit: https://brainly.com/question/9048015

#SPJ4

The phrase "like dissolves like" can be described as the compounds which have similar nature dissolve in each other that is polar dissolves polar and non-polar dissolves non-polar molecules.

Polarity is the separation of electric charge which is leading to a molecule or the chemical groups which are having an electric dipole moment, with a negatively charged end and a positively charged end as well. Polar molecules are the molecules which must contain one or more polar bonds which occur due to a difference in the electronegativities between the bonded atoms of the molecule.

A simple way to predict the compounds which will dissolve in other compounds is the phrase of the compound such as "like dissolves like". This means that the polar compounds dissolve in polar compounds, and the nonpolar compounds dissolve in nonpolar compounds, however, the polar and nonpolar molecules do not dissolve in each other.

Learn more about Polarity here:

https://brainly.com/question/30002497

#SPJ1

Answer:

11520

Explanation:

6.4×1800 wich is kw × 30 minutes in seconds

Answer:

Below

Explanation:

Find distance vehicle travels during this acceleration

d = vo t + 1/2 a t^2    

   a = change in velocity / change in time = 17.9/9.6 = 1.86458 m/s^2

   vo = 0    ( it starts from rest )

then  d = 1/2 ( 1.86458)* 9.6^2 = 85.92  meters

Now divide by the tire circumference to get the number of revs

     85.92 m / ( .38 m * pi )/rev = ~  71.97 revs

Answer: 64.5 rev. ✅

Explanation: The diameter of the tire is 38cm and the car accelerates uniformly from rest to reach a speed of 17.9m/s in 9.6s. The distance covered by the tire can be calculated by using the formula: distance = speed x time.

The distance covered by the tire is 17.9 x 9.6 = 171.84 meters. But when we convert it centimeters it is 17184 cm

The distance covered by the tire is equal to the circumference of the tire, which is equal to 2πd (d is the diameter of the tire). So we can calculate the number of revolutions by dividing the distance covered by the tire by the circumference of the tire.

Number of revolutions = distance covered / Circumference of the tire = 17184/ (2 x π x (38/100)) = 64.5 ✅

magnification m = -v/u  = -2

Concave mirrors can generate both real and virtual images. A virtual, magnified image of the object is produced when the concave mirror is positioned very near to it.

As the distance between the object and the mirror increases, the size of the image decreases and real images are produced. When an object's distance is less than the focal length in a concave mirror, the magnification will be higher than one. When the object's distance exceeds the focal length, the magnification is less than one.

Given focal length f = 18 cm

image distance v = 54 cm

then from lens equation

(1/f) = (1/u)+(1/v)

(1/18) = (1/u)+(1/54)

-(1/u) = (1/54)-(1/18)

object distance u = (18*54)/(18-54) = 27 cm

magnification m = -v/u = (-54)/(27) = -2

To know more about Concave mirror here:

https://brainly.com/question/3359672#

#SPJ4

Inability of Wegener to provide adequate explanation of the forces responsible for continental drift and prevailing belief that the earth was solid and immovable resulted in scientific dismissal of his theories.

The primary reason that Wegener's hypothesis could not be accepted was because he suggested no mechanism for the moving of continents. He thought that the force of Earth's spin was sufficient enough to cause continents to move, but geologists knew that rocks are too strong for this to be true.

Wegener is not qualified to propose theories in the fields of geology and  history of Earth because there was no mechanism available to endorse his proposals and offer convincing and truthful explanation.

The fossils could naturally be located in the places Wegener found them because fossils are mostly found where sedimentary rocks of the right age are exposed, such as river valleys, cliffs and hillsides.

To know more about Wegner, refer

https://brainly.com/question/798637

#SPJ1

When the ball experiences a net force of 0 newtons, its state of motion remains unchanged, that is, it will remain in rest or will move with same speed in same direction.

The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

As  the ball experiences a net force of 0 newtons, it experiences balanced force and its state of motion remains unchanged.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

Maximum resultant pulse will be 22.36 cm, if the amplitude of pulse A is 20 cm, and that of pulse B is 10 cm.

Equations of two superimposing waves with a phase difference of π/2, are:

y₁ = a₁sin(ωt) and y₂ = a₂sin(ωt + π/2) = a₂cos(ωt)

The equation of the resultant wave will be:

y = y₁ + y₂

y = a₁sin(ωt) + a₂cos(ωt)

Assuming a₁ = acos(Φ),  a₂ = asin(Φ)

So, y = asin(ωt+Φ)

(a₁)² + (a₂)² = a²(sin²Φ + cos²Φ)

(a₁)² + (a₂)² = a²

a = √((a₁)² + (a₂)²)

a = √(20²+10²)

a = √500

a = 22.36 cm.

To know more about amplitude, here

https://brainly.com/question/2845956

#SPJ4

Smaller ions have greater conductivity than larger ions.

The molar conductivity is the conductivity per mole: as the concentration grows, so does the number of charge carriers, and hence the conductivity. The molar conductivity would be constant if the quantity of ions scaled perfectly with the concentration of electrolyte.

However, the conductivity per ion decreases because ions do not act as totally independent charge carriers: they combine, and the rate at which they combine increases as the number of ions increases. This behavior leads to Kohlrausch’s Law (the law you mentioned at the beginning of your query), which is only applicable for strong (completely dissociated) electrolytes.

To learn more about molar conductivity to refer:

https://brainly.com/question/26097545

#SPJ1