Explanation:
Atomic radii is measured using the distance between nucleus of 2 atoms rather than the distance between the nucleus and outermost shell because:
- There is no clear/sharp boundary of the orbital. This is why it is called an electron cloud.
- Also, the exact location of the electron is not known. What is known is the probability of finding the electron there.
Due to this, it is not possible to measure the atomic radii precisely. That's why the distance between the nucleus of two atoms is used.
MORE THEN ONE ANSWER Factors affecting energy transfer
Lesson 2.14-2.15
Question 9 options:
Wind moving over a relatively flat water surface has less area to come in contact with the water, and this reduces energy transfer.
Larger waves have extra spaces and areas to trap air, increasing the transfer of the wind's energy to the water.
Wind moving over a relatively flat water surface has GREATER area to come in contact with the water, and this INCREASES energy transfer.
SMALLER waves have extra spaces and areas to trap air, increasing the transfer of the wind's energy to the water.
Answer:
1.) Wind moving over a relatively flat water surface has less area to come in contact with the water, and this reduces energy transfer.
2.) Larger waves have extra spaces and areas to trap air, increasing the transfer of the wind's energy to the water.
Explanation:
I got it right on the test.
Wind moving over a relatively flat water surface has less area to come in contact with the water, and this reduces energy transfer and Larger waves have extra spaces and areas to trap air, increasing the transfer of the wind's energy to the water.
What is energy transfer?When energy of any body travels from the one body to the another body, then transfer of energy takes place.
In the oceans, winds transfer their energy to the ocean or to the sea by the interaction with the surface water. When on the surface of ocean or sea up and down movement of water occurs then the interaction of that water with wind takes place and transfer of energy from wind to sea happen. More roughness or more height of the water on the surface of sea observed ten more transfer of energy from wind to sea occur.
Hence, option (1) & (2) is correct i.e. wind moving over a relatively flat water surface reduces energy transfer and Larger waves increasing the transfer of the wind's energy to the water.
To know more about energy transfer, visit the below link:
https://brainly.com/question/2667612
1)Change the following temperatures to Kelvin: 100 C and -20 C
2)Change the following temperatures to Celsius: 273 K and 15 K
Answer:
373 K; 253 K
0°C ; -258°C
Explanation:
In order to change Temperatures to Absolute Value (Kelvin) you shoud do this sum:
T° in C + 273 = T° in K
For question 1:
100°C + 273 = 373K
-20°C + 273 = 253K
For question 2:
T° K - 273 = T° C
273 K - 273 = 0°C
15 k + 273 = -258 °C
Answer:
-67.8
Explanation:
Question 5 of 5
When planning space exploration, scientists face many
challenges. One issue is the weight of the items being
transported. They can use the engineering design process
to help minimize the weight of materials on board a
spacecraft.
You have designed a prototype of a new, lighter material. What should be the
next step in your process?
A. Update your initial design for the new type of material.
B. Test to see
whether your material is strong and works well.
C. Figure out what problems people want to solve.
D. Brainstorm new ways to design materials.
Answer:B
Explanation: got it right on test
Test to see whether your material is strong and works well should be the next step in your process. Therefore, the correct option is option B.
What is space exploration?Space science and technology are used in space exploration to learn more about the universe. While astronomers use telescopes to explore the universe, both unmanned robotic space missions and human spaceflight also participate in the physical exploration of space.
When planning space exploration, scientists face many challenges. One issue is the weight of the items being transported. They can use the engineering design process to help minimize the weight of materials on board a spacecraft. You have designed a prototype of a new, lighter material. Test to see whether your material is strong and works well should be the next step in your process.
Therefore, the correct option is option B.
To know more about space exploration, here:
https://brainly.com/question/12271960
#SPJ5
A reaction that proceeds more slowly than
another reaction has a
(2 words)
______________
(Science) Help Please!
Answer:
product
Explanation:
It is the right answer.
HELP PLEASE , ITS DUE BY 6 ❤️10. If temperature were increased at the same rate for all four substances, which substance
would turn into a gas first?
Answer:
Dependant
Explanation:
Depending on the kind of substance you have (since ur answer of what substances was vauge) you would want to look at the molecular structure of the substances.
Understanding intermolecular bonds are key here (research this)
For example, Bromine is found as Br2 and only exerts London dispersion forces as there is no difference in polarity. And because this force is weaker, it has a lower boiling point
Another example being something like Hydrochloric acid (HCl). This is where Hydrogen acts as the positive atom while chlorine is the negative atom. This creates a stronger force and thus, a higher boiling point than Br2
Finally, there is Something like H2O where the force in play is Hydrogen bonding as Nitrogen, Oxygen, Fluorine where the bonds are strongest due to the electronegativity is at the greatest difference between these and Hydrogen. and thus having a higher boiling point.
So depending on the substance's bond, that will help determine the boiling point. If they fall under the same group, go based on the greatest difference in electronegativity.
I don't know if this is what you're looking for but, hope this helps. :)
Which of the following best explains how minerals get into streams?
A. Rainwater that is high in minerals from the atmosphere falls into the stream.
B. The stream absorbs minerals from the plants growing in and around its banks.
C. Rainwater dissolves minerals out of the rocks and soil along the stream during runoff.
D. When water evaporates from the ocean, it takes minerals with it and redeposits them as rainwater into the stream.
please help me
Answer:
C:Rainwater dissolves minerals out of the rocks and soil along the stream during runoff
As the moon orbits the ______________, its gravitational pull is______________ on the side of the earth closest to the ______________.This ______________ force pulls on the water facing the moon,creating a ______________. The moon also ______________ on the solidearth, causing the water on the far side of earth to ______________as well. These bulges in the water are the ______________.The areas in between the close and far side of the earth which are not in ______________ with the moon experience ______________.
pls help i give brainlyest
Answer:
Earth
Strongest
Moon
Gravitational
Tide
Pulls
Bulge
Waves
Proximity
Low Tide
Is the bond C=O polar or non polar
Answer:
Non Polar
Explanation:
Non Polar molecule because of its linear symmetric shape
how would I solve this problem?
Answer:
D
Explanation:
The goal in this set up is to make sure all units cancel each other.
Since we need to go from grams to atoms, our final unit should be atoms.
Using method of elimination, let's see why other options are wrong.
A - Although 'g' is cancelled out, we are left with moles^2 / atoms
B - Although 'g' is cancelled out, we are left with moles^2 / atoms
C - Although 'mol' is cancelled out, we are left with g^2 / atoms
When magnesium reacts with sulfuric acid the products are magnesium sulfate and hydrogen. If there are 15 grams of magnesium at the start of the reaction, how much magnesium will be present in the magnesium sulfate
Answer: 15 grams of magnesium will be present in the magnesium sulfate
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.
The balanced chemical reaction is:
[tex]Mg+H_2SO_4\rightarrow MgSO_4+H_2[/tex]
As the mass remains conserved at the end of the reaction, there will be 15 grams of Magnesium in magnesium sulphate.
What is the charge on an atom after it gains two electrons during the formation of a bond?
One negative charge
One positive charge
Two negative charges
Two positive charges
Answer:
two negative charges is the answer of your question
What is the molarity of a solution that contains 3.66 mol KCl in 7.98 L solution?
Answer:
.4586M
Explanation:
It's simple, just devide the mol value by the volume value. So 3.66mol/7.98L=.4586M
What are the general trends in first ionization energy across a period (LR) within the
periodic table? From bottom to top within a group?
If a star is 300 light years away from Earth, how long does it take light from that star to reach Earth?
A. 300 days
B. 300 hours
C. 300 years
D. 300 light years
A volcano erupts sending lava down its side the lava destroys the forest below which sphere is being impacted negatively? And why
PLEASE HELP ME I DONT HAVE MUCH TIME
Answer:
Biosphere
Explanation:
This is because the biosphere is the category of life. This means that plants, animals, humans, and bacteria are all apart of the biosphere.
What volume will 3.50 mol of ammonia gas occupy at conditions of standard temperature and pressure?
Answer:
Q:
What volume will 3.50 mol of Xe gas occupy at STP?
A:
78.4 L
Explanation:
The volume occupied by 3.5 moles of ammonia gas at standard temperature and pressure (STP) is 78.45 L
Data obtained from the question Number of mole (n) = 3.5 moles Pressure (P) = STP = 1 atm Temperature (T) = STP = 273 KGas constant (R) = 0.0821 atm.L/Kmol Volume (V) =? How to determine the volume
The volume of the gas at standard temperature and pressure (STP) can be obtained by using the ideal gas equation as illustrated below:
PV = nRT
1 × V = 3.5 × 0.0821 × 273
V = 78.45 L
Learn more about ideal gas equation:
https://brainly.com/question/4147359
list 5 things which we can make using each of the following materials
Answer:
Glass
1.microscopes
2.mirrors
3.glass shelves
4.wrist watch glass
5.magnifying glass
Metal
1.keys
2.automobile body parts
3.coins
4.window frames
5.screws and nails
Plastic
1.bottles
2.boxes
3.balls
4.carry bags
5.buckets and mugs
Wood
1.chairs
2.tables
3.shoe stand
4.dressing table
5.shelves
Which is not an example of mechanical energy used in power plants? *
wind
water
O burning fossil fuels
O gravity
burninh fossil fuels is not an example
Answer:
Gravity
Explanation:
Gravity is not a form of mechanical energy used in power plants
how much heat is released as 5.00G of PB cool from 75.0° C to 25.0° C
Answer:
32.25 J
Explanation:
Heat, H = ?
Mass, m = 5g = 5 / 1000 = 0.005 Kg
Initial Temperature = 75.0° C
Final Temperature = 25.0° C
Temperature change, ΔT = Final - Initial = 50° C
Specific heat capacity of lead, C = 129 (J/kg°C)
The relationship between these quantities is given by the equation
H = mCΔT
H = 0.005 * 129 * 50
H = 32.25 J
How to do dots and cross diagrams
Answer:
Draw circles to represent the electron shell of each atom overlapping the circles where the atoms are bonded. Add dots to represent the outer electrons of one type of atom (H). Add crosses to represent the outer electrons of the other type of atom (Cl). Make sure the electrons are always in pairs.
A trait that is helpful to a species will become more common in that
species over time. This is called what.
A. genetic variation
B. transition
C. overproduction
D. selection
Which om sled below is amplo dl an abelis laeler in an evünment?
ban
B. droganty
C. ar temperatura
D. cation
Answer:
Explanation:
i got D
(Help would be greatly appreciated) What is the molarity of a solution which contains 22.41 grams of NaCl in 50.0 mL of solution?
1. 0.488M
2. 7.67mol
3. 7.67M
4. 0.000767M
Answer:
7.67
Explanation:
According to molar concentration, the molarity of solution which contains 22.41 grams of NaCl in 50.0 ml of solution is 7.67 M.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.Substitution of values in the given formula gives, molarity= 22.41/58.44×1/0.05=7.67 M.
Thus, the molarity of solution which contains 22.41 grams of NaCl in 50.0 ml of solution is 7.67 M.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ2
what type of galaxy is this
Explanation:
it is an spiral as it are rounded so
It is a spiral type of galaxy.
classify matter as elements mixtures and compounds
Answer:
An element contains just one type of atom. A compound contains two or more different atoms joined together. A mixture contains two or more different substances that are only physically joined together, not chemically. A mixture can contain both elements and compounds.
Can someone pls help me with this its due in 20 minutes.
Answer:
15. The velocity of a sound wave is affected by two properties of matter: the elastic properties and density.
16. The greater the density of a medium, the slower the speed of sound. This observation is analogous to the fact that the frequency of a simple harmonic motion is inversely proportional to m, the mass of the oscillating object.
17. Temp °C 0 m/s2 m/s
50 360.51 361.62
18. Molecules at higher temperatures have more energy, thus they can vibrate faster. Since the molecules vibrate faster, sound waves can travel more quickly. The speed of sound in room temperature air is 346 meters per second. ... The speed of sound is also affected by other factors such as humidity and air pressure.
Anyone help please more & you get extra points
Answer:
qns-4
1-multicellular organism
2-unicellular organism
3-unicellular organism
4-multicellular organism
5-unicellular organism
6-multicellular organism
7-unicellular organism
What is the solution to the problem expressed to the correct number of significant figures?
7.21= ?
A. 1.688
OB.
1.69
O C.
1.7:
OD
1.70
Answer:
(102 900 ÷ 12) + (170 × 1.27) = 8800
Step 1. Evaluate the expressions inside the parentheses (PEMDAS)
102 900 ÷ 12 = 8575
170 × 1.27 = 215.9
In multiplication and division problems, your answer can have no more significant figures than the number with the fewest significant figures.
Thus, the underlined digits are not significant, but we keep them in our calculator to avoid roundoff error.
Step 2. Do the addition (PEMDAS).
8575
+ 215.9
= 8790.9
Everything that you add to an insignificant digit gives an insignificant digit as an answer.
Thus, the underlined digits are not significant.
We must drop them and round up the answer to 8800.
Explanation:
I’ll really appreciate it if you help me out on these 2 questions.
Answer:
13. A
14. C
Explanation: i tried my best