Answer:
When writing a genotype, the dominant allele is usually represented by a capital letter, while the recessive allele has a lowercase letter.
Explanation:
Please mark me brainlest.
Answer:
Because in a punnett square, dominant alleles need to be differentiated from the recessive alleles, to do this, we write the dominant alleles as capital letters.
Explanation:
What is a potential drawback of a fast rate of reaction in industry?
Answer:
It is expensive to generate conditions for a fast reaction
Explanation:
Find the current if 20C of charge pass a particular point in a circuit in 10 seconds.
Answer:
2 A
Explanation:
From the question,
Q = it..................... Equation 1
Where Q = Quantity of charge, i = cudrrent, t = time.
Make i the subject of the equation
i = Q/t.......................... Equation 2
Given: Q = 20 C, t = 10 seconds.
Substitute these values into equation equation 2
i = 20/10
i = 2 A.
Hence the current is 2A
Given values are:
Charge, Q = 20 CTime, t = 10 secondsAs we know,
→ [tex]Current = \frac{Charge}{Time}[/tex]
or,
→ [tex]i = \frac{Q}{t}[/tex]
BY substituting the values, we get
[tex]= \frac{20}{10}[/tex]
[tex]= 2 \ A[/tex]
Thus the answer above is right.
Learn more about current here:
https://brainly.com/question/19668907
Which of the following objects is accelerating?
Answer: A flower pot falling
Explanation:
The car on the curve (its direction is changing) and the falling flower pot (its speed is changing) are both undergoing acceleration.
The earth rotates through one complete revolution every 24 hours. Since the axis of rotation is perpendicular to the equator, you can think of a person standing on the equator as standing on the edge of a disc that is rotating through one complete revolution every 24 hours. Find the angular and linear velocity of a person standing on the equator. The radius of earth is approximately 4000 miles.
Answer:
ω = 7.27 x 10⁻⁵ rad/s
v = 467.99 m/s
Explanation:
First, we will find the angular velocity of the person:
[tex]Angular\ Velocity = \omega = \frac{Angular\ Distance}{Time}[/tex]
Angular distance covered = 1 rotation = 2π radians
Time = (24 h)(3600 s/ 1 h) = 86400 s
Therefore,
[tex]\omega = \frac{2\pi\ rad}{86400\ s}[/tex]
ω = 7.27 x 10⁻⁵ rad/s
Now, for the linear velocity:
[tex]v = r\omega[/tex]
where,
v = linear velocity = ?
r = radius of earth = (4000 miles)(1609.34 m/1 mile) = 6437360 m
Therefore,
[tex]v = (6437360\ m)(7.27\ x\ 10^{-5}\ rad/s)[/tex]
v = 467.99 m/s
Name the four layers of the atmosphere (in order starting at the bottom
Answer:
Troposphere, stratosphere, mesosphere and thermosphere. The next region is the exosphere, but that region is 500+ km from the Earth's surface.
[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Atmosphere.
The four layers of Atmosphere starting from bottom are as follows:
1.) Troposphere - The troposphere is the lowest layer of our atmosphere. Starting at ground level, it extends upward to about 10 km (6.2 miles or about 33,000 feet) above sea level.
2.) Stratosphere - The next layer up is called the stratosphere. The stratosphere extends from the top of the troposphere to about 50 km (31 miles) above the ground.
3.) Mesosphere - Above the stratosphere is the mesosphere. It extends upward to a height of about 85 km (53 miles) above our planet. Most meteors burn up in the mesosphere.
4.) Thermosphere - The layer of very rare air above the mesosphere is called the thermosphere. High-energy X-rays and UV radiation from the Sun are absorbed in the thermosphere, raising its temperature to hundreds or at times thousands of degrees.
An object that is spinning, but not orbiting anything, has zero angular momentum.
True
False
examples of buildup of static energy?
Answer:
Materials that can lose or gain electrons in this way are called triboelectric, according to Northwestern University. One common example of this would be shuffling your feet across carpet, particularly in low humidity which makes the air less conductive and increases the effect.
Explanation:
Hope that helps :)
Newton's law of gravitation is proportional to the inverse cube of the distance between the two objects.
True
False
what is impulse in physical science
Answer:
In classical mechanics, impulse (symbolized by J or Imp) is the integral of a force, F, over the time interval, t, for which it acts. Since force is a vector quantity, impulse is also a vector quantity. ... A resultant force causes acceleration and a change in the velocity of the body for as long as it acts.
8. What is the mass of a toy car with a speed of 12.5 m/s and 47500 J of kinetic energy?
Answer:
608kg
Explanation:
Formula : Kinetic energy
½ ×mass x speed²
47500
½×12.5²
=608 Kg
Who watching all star draft? Luka better get picked first ong
What is the acceleration of a 7 kg object if a force of 63 N is applied?
Answer:
9m/s^2
Explanation:
F=ma
a=F/m
a=63/7
a=9m/s^2
A 10 N force is used to push a 30 kg box across the floor, moving it a distance of 20 m. There is no friction. What is the magnitude of work done on the box?
A. 2 J
B. 10 J
C. 30 J
D. 200 J
what kind of weather would u assosiate with higher perssure system? How does the density, humidity and air motion compare to that of low pressure system?
Answer:
Low pressure systems typically arrive with storms and clouds. Air motion is usually upwards, as heated are is less dense and more buoyant than cooler air. A high pressure system is typically cooler than its counter-part, and skies are usually clear. Low pressure systems carry more water vapor due to rising hot air cooling and condensing.
Which type of electricity is a one-time event, caused by unbalanced charges trying to become neutral again?
Answer: yes
Explanation:
During which sequence of phases does the moon's visibility increase
During the "waxing" phases, the two weeks immediately following the New Moon.
New Moon ==> waxing crescent ==> First Quarter ==> waxing gibbous ==> Full Moon
The phase of the moon decides the moon's visibility. The sequence of phases does the moon's visibility increases is; the waxing crescent, first quarter, waxing gibbous, full Moon.
What is the moon phase?The moon changes shape every day. This is due to the fact that the celestial body has no light of its own and can only reflect sunlight.
Only the side of the moon facing the sun can reflect this light and seem bright. The opposite side appears black. this is a full moon.
We can only see the black section when it lies between the sun and the earth when a new moon occurs. We witness intermediate phases like a half-moon and crescent in between these two extremes.
Following are the sequence of phases does the moon's visibility increase is;
1. Waxing crescent
2. First Quarter
3. Waxing gibbous
4. Full Moon
The phase of the moon decides the moon's visibility. Hence the visibility changes with the change in the phase of the moon.
To learn more about the moon's phase refer to the link;
https://brainly.com/question/2285324
Help please :)
Ultraviolet waves are transmitted by ....... ?
Answer:
Sunlight is the greatest source of UV radiation. Man-made ultraviolet sources include several types of UV lamps, arc welding, and mercury vapour lamps.
Explanation:
A magnet produces a magnetic field.
Which diagram shows the magnetic field pattern around a bar magnet
You Forgot To Add The Pictures
Which graph illustrates constant speed?
A
B
C
D
I will reward you
Answer:
D because the line isn't changing which means constant speed it's going at the same rate so yea it's D
Answer:
D.
Hope that helps!?
Explanation:
Someone pls help!! Right now :(
coefficient of viscosity of a glycerine is 8.4 poison explain
Answer:
coefficient of viscosity of 8.4 poison denotes that the tangential frictional force acting per unit area when divided by the velocity gradient as a result of streamline flow conditions gives 8.4.
Explanation:
Viscosity is defined as the extent to which a fluid can resist flow when a force is applied to it.
Now, coefficient of viscosity is the term in which viscosity is calculated. It is basically the tangential frictional force acting per unit area which is divided by the velocity gradient as a result of streamline flow conditions.
Thus, coefficient of viscosity of 8.4 poison denotes that the tangential frictional force acting per unit area when divided by the velocity gradient as a result of streamline flow conditions gives 8.4.
an egg is Free Falling Down from a nest in a tree (neglect air resistance)
We are to calculate the acceleration.
Answer:
-9.8 m/s²
Explanation:
Since the egg is in a free fall, it means that the force due to gravity will be equal to the normal force.
Now,
Force due to gravity: F_g = mg
Normal force; F_n = ma
Thus;
mg = ma
m will cancel out to get
g = a
Since it is a free fall motion, then gravity is negative;
-g = a
g has a constant value of 9.8 m/s². Thus;
a = -9.8 m/s²
Pleaseee I need help!!
Answer:
R1=3.333 Ohms
R2=10 Ohms
R3=16.666 Ohms
Explanation:
30 total
30=R1+R2R3
30=1(x):3(x):5(x)
x=3.3333
R1=3.333 Ohms
R2=10 Ohms
R3=16.666 Ohms
a guitar string transmits waves at 509 m/s. to create a 491 Hz note, to what length should the guitar player shorten the string?
Answer:
Wavelength = 1.04 meters
Explanation:
Given the following data;
Speed = 509m/s
Frequency = 491Hz
To find the wavelength;
Wavelength = speed/frequency
Wavelength = 509/491
Wavelength = 1.04 meters
Therefore, the guitar player should shorten the length of the string to 1.04 meters.
Answer: 0.52
Explanation:
what dose current equal?
A ball on the end of a string is whirled around in a horizontal circle of radius 0.300 m. The plane of the circle is 1.00 m above the ground. The string breaks and the ball lands 2.30 m (horizontally) away from the point on the ground directly beneath the ball's location when the string breaks. Find the centripetal acceleration in m/s2 of the ball during its circular motion.
Answer:
86.7 m/s²
Explanation:
Given that
Radius of the circle, r = 0.3 m
Height of the plane above the ground, = 1 m
Distance at which the ball lands, d = 2.3 m
To solve this question, we would use one of the principles of projectile motion.
v = ut + 1/2at²
-1 = 0 + 1/2 * -9.8 * t²
-1 = -4.9 t²
t² = 1/4.9
t² = 0.204
t = √0.204
t = 0.45 s
Then again, it's constant horizontal speed is
v(x) = x/t
v(x) = 2.3 / 0.45
v(x) = 5.1 m/s
And finally, the centripetal acceleration is gotten using the formula
a = v²/r
a = 5.1² / 0.3
a = 26.01 / 0.3
a = 86.7 m/s²
An electron, moving toward the west, enters a uniform magnetic field. Because of this field the electron curves upward. The direction of the magnetic field is An electron, moving toward the west, enters a uniform magnetic field. Because of this field the electron curves upward. The direction of the magnetic field is downward. towards the west. upward. towards the south. towards the north.
Answer:
towards the north.
Explanation:
The uniform magnetic field has strength and direction in all points. The upwards motion of the field or he electronic curves will show a northern direction. Hence, the field can be created by taking the opposite magnetic in the two directions. The straight line of motion of the field will indicate the flow in the north direction. The magnetic field lines will remain parallel and stay uniform to poles.
___________is
objects total kinetic and potential energy.
Answer:
Bowling ball
Explanation:
Physics help, thank you guys so much!
Answer:
Δt = 5.85 s
Explanation:
For this exercise let's use Faraday's Law
emf = [tex]- \frac{d \phi}{dt}[/tex] - d fi / dt
[tex]\phi[/tex] = B. A
\phi = B A cos θ
The bold are vectors. It indicates that the area of the body is A = 0.046 m², the magnetic field B = 1.4 T, also iindicate that the normal to the area is parallel to the field, therefore the angle θ = 0 and cos 0 =1.
suppose a linear change of the magnetic field
emf = - A [tex]\frac{B_f - B_o}{ \Delta t}[/tex]
Dt = - A [tex]\frac{B_f - B_o}{emf}[/tex]
the final field before a fault is zero
let's calculate
Δt = - 0.046 (0- 1.4) / 0.011
Δt = 5.85 s
You start biking at the top of a steep hill. As you travel downhill, you apply
your brakes to control your speed. What are the energy transformations
taking place in this system?
A. Kinetic energy to mechanical energy to chemical energy
B. Potential energy to kinetic energy to heat energy
C. Thermal energy to mechanical energy to potential energy
D. Electric energy to kinetic energy to chemical energy