Which statement about the inputs to and outputs from nuclear fusion in the Sun is true?

The CMB radiation's current temperature of 2.7 Kelvin is a result of the cooling and redshifting caused by the expansion of the Universe, which has been slowing down over time due to gravity.

The Cosmic Microwave Background (CMB) radiation is a remnant of the early hot and dense Universe. About 380,000 years after the Big Bang, the Universe cooled enough to allow the formation of neutral atoms, which made it transparent to radiation. This released the CMB radiation, which has been traveling through the Universe ever since, and its temperature has been cooling due to the expansion of the Universe. The CMB radiation is currently observed at a temperature of about 2.7 Kelvin, much cooler than the early Universe's temperature of 3000 Kelvin. This cooling is due to the expansion of the Universe, which causes the radiation to redshift to lower energies and longer wavelengths. This effect is known as the cosmological redshift. Moreover, the expansion of the Universe is not constant, but rather it is slowing down due to the gravitational pull of matter. This means that the early Universe's rate of expansion was faster than it is today, causing the CMB radiation to cool more rapidly in the past.

For such more questions on gravity

https://brainly.com/question/30054501

#SPJ11

The term that best describes translational motion along a curved line is option B. curvilinear.

The translational motion refers to the movement of an object in a straight line, where all points of the object move parallel to each other. However, when the motion occurs along a curved path, such as a circle, arc, or any other non-linear trajectory, it is referred to as curvilinear motion.

In curvilinear motion, the object follows a curved path, and the velocity and acceleration vectors change direction as the object moves along the curve. This is different from rectilinear motion, which refers to motion in a straight line.

The rotational motion refers to the movement of an object around an axis or a point, such as the spinning of a wheel or the rotation of a planet. Rotational motion involves objects rotating around a fixed axis rather than moving along a curved line.

General is a broad term that does not specifically describe the type of motion along a curved line. It does not provide any specific information about the nature or characteristics of the motion. Therefore, the correct answer is option B.

The Question was Incomplete, Find the full content below :

Which of the following terms best describes translational motion along a curved line?

A. rectilinear

B. curvilinear

C. rotational

D. general

know more about translational motion here:

https://brainly.com/question/30770506

#SPJ8

The scientific study of physics focuses on the underlying concepts that underpin the laws of nature. It investigates how matter, energy, space, and time behave and interact. Physics' fundamental goal is to comprehend the underlying laws and forces that create our universe.

Physics has developed theories and rules to explain a wide variety of events, from the motion of celestial bodies to the behaviour of subatomic particles, via meticulous observation, investigation, and mathematical analysis.

These theories offer a framework for comprehending and forecasting the behaviour of physical systems, such as Newton's laws of motion and Einstein's theory of relativity.

From the tiniest particles to the biggest cosmic structures, physics has enhanced our understanding of the world and sparked a host of technological advances.

To know more about Physics :

https://brainly.com/question/32123193

#SPJ1.

The velocity of the arrow when it hits the ground, given that the arrow was shot from the roof of a building 30 m high at 5 m/s is 24.5 m/s

First, we shall obtain the maximum height of the arrow from the top of the roof. Details below:

H = u²Sine²θ / 2g

H = [5² × (Sine 45)²] / (2 × 9.8)

H = 0.64 m

Next, we shall obtain the maximum height from the ground. Details below:

Maximum height from ground = Maximum height from root + Height of building

Maximum height from ground = 0.64 + 30

Maximum height from ground = 30.64 m

Next, we shall obtain the time take to reach the ground.

h = ½gt²

30.64 = ½ × 9.8 × t²

30.64 = 4.9 × t²

Divide both side by 4.9

t² = 30.64 / 4.9

Take the square root of both side

t = √(30.64 / 4.9)

t = 2.5 s

Finally, we shall obtain the velocity with which the arrow hits the ground. This is illustrated below:

v = gt

v = 9.8 × 2.5

v = 24.5 m/s

Thus, we can conclude that the velocity the arrow used in hitting the ground is 24.5 m/s

Learn more about motion under gravity:

https://brainly.com/question/28927071

#SPJ1

The shape of a line graph displaying temperature change over time before boiling is typically linear and increasing.

In a line graph showing the temperature change over time of a liquid before it starts to boil, the shape is generally linear and increasing.

This is because as heat is applied to the liquid, its temperature increases at a consistent rate.

During this phase, the heat energy is used to increase the kinetic energy of the molecules in the liquid, causing a rise in temperature.

Once the boiling point is reached, the graph may show a plateau, as the energy is then used to change the liquid's state rather than further increase the temperature.

For more such questions on temperature, click on:

https://brainly.com/question/26866637

#SPJ11

Approximately 5.88 grams of steam will pass into the calorimeter to raise the temperature of the system from 0°C to 30°C, assuming no heat loss to the surroundings.

To calculate the mass of steam that will pass into the calorimeter, we need to consider the heat exchange that occurs during the process.

First, we need to determine the heat required to raise the temperature of the water and ice from 0°C to 30°C. We can use the specific heat capacity (c) of water to calculate this:

Heat required for water: Q_water = m_water * c_water * ΔT_water

Where:

m_water = mass of water

c_water = specific heat capacity of water

ΔT_water = change in temperature of water

Given:

m_water = 80 g

c_water = 4.18 J/g°C (specific heat capacity of water)

ΔT_water = (30°C - 0°C) = 30°C

Q_water = 80 g * 4.18 J/g°C * 30°C = 9972 J

Next, we need to consider the heat required to melt the ice at 0°C into water at 0°C. This can be calculated using the heat of fusion (ΔH_fus) of ice:

Heat required for ice: Q_ice = m_ice * ΔH_fus

Where:

m_ice = mass of ice

ΔH_fus = heat of fusion of ice (334 J/g)

Given:

m_ice = 10 g

ΔH_fus = 334 J/g

Q_ice = 10 g * 334 J/g = 3340 J

Now, let's calculate the total heat required:

Total heat required = Q_water + Q_ice

Total heat required = 9972 J + 3340 J = 13312 J

Since we neglect heat loss to the surroundings, this total heat is equal to the heat gained by the steam when it condenses:

Heat gained by steam = m_steam * ΔH_vap

Where:

m_steam = mass of steam

ΔH_vap = heat of vaporization of steam (2260 J/g)

Given:

ΔH_vap = 2260 J/g

Substituting the known values into the equation, we can solve for m_steam:

13312 J = m_steam * 2260 J/g

m_steam = 13312 J / 2260 J/g ≈ 5.88 g

For more such questions on calorimeter visit:

https://brainly.com/question/28537741

#SPJ11

1. (a) Peixotto Media's charter authorizes the sale of 35,000,000 shares of stock, but it will begin by offering 20,000 of them at a par value of $4 per share. John William currently has $500 that he would like to invest in this company's stocks. John William will be able to purchase 125 shares of Peixotto Media stock.

(b) Privileges John William will have as a shareholder in Peixotto Media are Voting Rights, Dividend Payments, Capital Appreciation etc.

(a) In order to calculate how much stock John William will be able to purchase, we need to determine how many shares he can buy with his available funds. The par value per share is $4, so to find the number of shares he can buy, we divide his investment amount ($500) by the par value per share ($4):

Number of shares = Investment amount / Par value per share

Number of shares = $500 / $4 = 125 shares

Therefore, John William will be able to purchase 125 shares of Peixotto Media stock.

(b) As a shareholder in Peixotto Media, John William will have certain privileges. These privileges typically include:

Voting Rights: Shareholders are generally entitled to vote on matters that affect the company, such as electing the board of directors or approving major corporate decisions.

Dividend Payments: If the company declares dividends, shareholders may receive a portion of the company's profits in the form of dividend payments.

Capital Appreciation: If the value of the company's stock increases, shareholders can benefit from capital appreciation by selling their shares at a higher price than what they initially paid.

Information Rights: Shareholders have the right to access certain company information, such as financial reports or annual statements, to stay informed about the company's performance.

Liquidation Preference: In the event of the company's liquidation or bankruptcy, shareholders may have a claim on the company's assets after other obligations are fulfilled.

For more such information on: stocks

https://brainly.com/question/26128641

#SPJ11

The net force on particle q2 is a positive force pointing to the right.

To determine the net force on particle q2, we need to calculate the individual forces exerted on q2 by q1 and q3 and then add them vectorially.

The force between two charged particles can be calculated using Coulomb's law, which states that the force (F) between two charged particles is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them:

F = k * (|q1| * |q2|) / r^2

where k is the electrostatic constant.

Given:

q1 = +8.0 μC

q2 = +3.5 μC

q3 = -2.5 μC

Distance between q1 and q2 (r12) = 0.10 m

Distance between q2 and q3 (r23) = 0.15 m

First, let's calculate the force between q1 and q2:

F12 = k * (|q1| * |q2|) / r12^2

Substituting the values:

[tex]F12 = (9 \times 10^9 N m^2/C^2) * ((8.0 \times 10^-6 C) * (3.5 \times 10^-6 C)) / (0.10 m)^2[/tex]

Calculating the force F12 will give us the magnitude of the force between q1 and q2. However, since q1 and q2 have the same charge sign, the force will be repulsive, pointing to the right.

Next, let's calculate the force between q2 and q3:

[tex]F23 = k * (|q2| * |q3|) / r_{23}^2[/tex]

Substituting the values:

F23 = (9 x 10^9 N m^2/C^2) * ((3.5 x 10^-6 C) * (2.5 x 10^-6 C)) / (0.15 m)^2

Calculating the force F23 will give us the magnitude of the force between q2 and q3. Since q2 and q3 have opposite charge signs, the force will be attractive, pointing to the left.

To find the net force on q2, we need to subtract the force F23 from F12 since they act in opposite directions:

Net force on q2 = F12 - F23

Finally, we need to consider the direction of the forces. Since F12 is repulsive (positive) and F23 is attractive (negative), the net force on q2 will be positive, pointing to the right.

For more such questions on  net force visit:

https://brainly.com/question/14361879

#SPJ8

The statement "all cells are not created equal" emphasizes that within a multicellular organism, cells differentiate and specialize to possess unique characteristics and perform distinct functions, contributing to the complexity and efficiency of the organism's overall functioning.

The statement "all cells are not created equal" emphasizes the idea that within a multicellular organism, different cells can possess unique characteristics and perform distinct functions. This concept is often discussed in the field of developmental biology, which explores how cells differentiate and specialize during the growth and maturation of an organism.

During early embryonic development, cells undergo a process called cell differentiation, where they acquire specific characteristics and functions. This process is regulated by various factors, such as gene expression patterns and signaling molecules. As a result, cells differentiate into various types, such as muscle cells, nerve cells, skin cells, and blood cells, among others.

Once cells have differentiated, they become specialized to perform specific tasks in different tissues and organs. For instance, muscle cells have contractile proteins that enable movement, while nerve cells have specialized extensions called axons and dendrites that facilitate communication between different parts of the body. Similarly, blood cells have diverse roles, including carrying oxygen (red blood cells), defending against infections (white blood cells), and facilitating blood clotting (platelets).

These specialized cells are adapted to carry out specific functions efficiently and effectively, and their structures and characteristics reflect their roles within the organism.

Therefore, the statement "all cells are not created equal" highlights the idea that cells within a multicellular organism are diverse and have distinct features and functions that contribute to the overall functioning and complexity of the organism.

To learn more about The organelle plant cells click:

brainly.com/question/23970132

#SPJ1

A broken stabilizer link is the most likely cause of excessive body lean and sway.

The most likely cause of excessive body lean and sway while cornering is worn or broken stabilizer (sway) bar links. The stabilizer bar, also known as the sway bar, plays a crucial role in reducing body roll and maintaining stability during cornering.

When the stabilizer bar links wear out or become broken, they lose their ability to effectively transfer forces between the suspension components, leading to increased body lean and sway. This can result in a less stable and potentially unsafe driving experience, as the vehicle may feel unstable and have reduced cornering capabilities.

In summary, while all the mentioned components can impact suspension performance, a broken or worn stabilizer bar link is the most likely cause of excessive body lean and sway while cornering. It is crucial to have the stabilizer bar links inspected and replaced if necessary to restore proper stability and handling during cornering maneuvers.

Know more about forces here:

https://brainly.com/question/12785175

#SPJ11

To ensure basic human dignity in relation to safe and healthy living, governments can implement various measures such as accessible healthcare, adequate housing, and sanitation and clean water.

Governments should place a high priority on ensuring that everyone has access to healthcare services, enabling them to receive the essential medical care without suffering financial difficulty. This entails providing access to necessary pharmaceuticals, cheap healthcare, and a strong healthcare system.

All citizens should have access to affordable and good housing, according to governments. Policies may include restrictions on rental costs, programs to expand the supply of affordable housing, and efforts to combat homelessness. Basic hygienic and safety criteria should be met by housing.

Governments must make sure that everyone has access to clean, safe drinking water and adequate sanitary facilities. The spread of diseases and the maintenance of sanitary living circumstances can be aided by investments in sewage systems, water treatment facilities, and public hygiene education.

Learn more on healthy living here https://brainly.com/question/27440736

#SPJ1

The intrepid hero has done 2.332 x[tex]10^6[/tex] Joules of work in pushing the crate.

To ascertain the work done by the traveler, we first need to find the power he applied on the case. As per Newton's subsequent regulation, force is equivalent to mass times speed increase, so the power applied by the traveler on the container is:

Force = mass x speed increase

Force = 220 kg x 2 [tex]m/s^2[/tex] = 440 N

Then, we really want to work out the distance the case was moved. The pilgrim pushed the box a distance of 5.3 km, or 5,300 m.

At long last, we can compute the work done by the pioneer utilizing the equation:

Work = force x distance

Work = 440 N x 5,300 m

Work = [tex]2.332 x 10^6[/tex] Joules

Thusly, the valiant legend has done 2.332 x [tex]10^6[/tex] Joules of work in pushing the case.

The space pilgrim takes care of business on the case by applying a power that makes it speed up. The work done is equivalent to the power duplicated by the distance over which the power is applied. Involving the recipe for force, F=ma, and the given qualities for mass and speed increase, we can ascertain the power applied. Then, at that point, involving the recipe for work, W=Fd, and the given distance, we can ascertain the work done. The work done by the adventurer is 2.332 x [tex]10^6[/tex] J.

To learn more about work, refer:

https://brainly.com/question/29167651

#SPJ1

The amount of acetone that was spilt is around 0.36 liters, or 360 milliliters.

To solve this problem, use the formula for volumetric thermal expansion:

ΔV = V₀βΔT

Where:

ΔV = change in volume

V₀ = initial volume

β = coefficient of volumetric expansion

ΔT = change in temperature

Also use the formula for linear thermal expansion to find the change in length of the container:

ΔL = L₀αΔT

Where:

ΔL = change in length

L₀ = initial length

α = coefficient of linear expansion

ΔT = change in temperature

Initial length can be calculated as follows:

V = L³ ⇒ L = ∛V = ∛6 L ≈ 1.82 meters

Now calculate the change in length of the container and the change in volume of acetone:

ΔL = L₀αΔT = (1.82 m)(10⁻⁵ °C⁻¹)(40 °C) ≈ 0.00073 meters

ΔV = V₀βΔT = (6 liters)(1.5 x 10⁻³ °C⁻¹)(40 °C) ≈ 0.36 liters

Since the acetone spills out of the container, its final volume is equal to the initial volume minus the change in volume:

Vf = Vi - ΔV = 6 L - 0.36 L = 5.64 L

Therefore, the volume of spilled acetone is approximately 0.36 liters or 360 milliliters.

Find out more on acetone here: https://brainly.com/question/14498053

#SPJ1

Answer:

The correct answer is B. Energy cannot be created or destroyed.

The law of conservation of energy states that energy cannot be created or destroyed, but it can be transformed from one form to another. This means that in any physical process, the total amount of energy in a system remains constant. Energy can be converted from one form to another, such as from kinetic energy to potential energy or from electrical energy to light energy, but the total amount of energy in the system remains the same.

The glycerin index predicts the way certain foods affect​ the blood glucose.

The glycemic index is a numerical scale that ranks carbohydrates in foods based on how they affect blood glucose levels compared to a reference food, typically pure glucose  or white bread. Foods with a high glycerin index cause rapid increase in blood sugar levels, while foods with a low glycerin index result in a slower and more gradual increase.

The glycerin index is often used as a tool for managing blood sugar levels, particularly in individuals with diabetes. Foods with a lower glycerin index are generally considered healthier as they provide more sustained energy and have a lesser impact on blood sugar levels.

Learn more about glycerin index below.

https://brainly.com/question/30364885

#SPJ1

The best example of Newton's third law of motion is, When a passenger stepped from a boat to the shore, the boat moved away from the shore. Thus, option C is correct.

Sir Issac Newton gives three laws of motion. The first law states that an object remains at rest or in continuous motion unless an external force acted on it. The second law stated that the force is directly proportional to the acceleration of the object. Newton's third law states that, for every action, there is an equal and opposite reaction.

From the given, Newton's third law is applicable, When a passenger stepped from a boat to the shore, the boat moved away from the shore. This shows the action and reaction of the boat and shore.

Thus, the ideal solution is option C.

To learn more about Newton's law of motion:

https://brainly.com/question/29775827

#SPJ1

There are a few formulas you can use to calculate final velocity, depending on the information given:

If given initial velocity, acceleration, and time, use:

vfinal = vinitial + at

Where:

vfinal is the final velocity

vinitial is the initial velocity

a is the acceleration

t is the time

If given initial velocity, change in velocity, and time, use:

vfinal = vinitial + Δv

Where:

Δv is the change in velocity

If given displacement, initial velocity, acceleration, and time, use:

vfinal = √(vinitial2 + 2aΔx)

Where:

Δx is the displacement

If given initial and final displacements and time, use:

vfinal = Δx/t

So in summary, to calculate final velocity you need:

Initial velocity + Acceleration + Time

OR

Initial velocity + Change in velocity

OR

Initial velocity + Acceleration + Displacement + Time

OR

Initial/final displacement + Time

Then you can use the appropriate formula, plug in the known values, and solve for final velocity (vfinal).

Hope these formulas and explanations help! Let me know if you have any other questions.

The statement "Something established by authority as a rule for measurement is called a standard unit" is True.

Something established by authority as a rule for measurement is called a standard unit. Standard units provide a consistent and universally accepted basis for measuring quantities in various fields such as science, engineering, and commerce.

Standard units are essential because they ensure consistency and accuracy in measurements across different contexts and locations. They serve as a reference point for comparing and quantifying physical quantities. By establishing standardized units, authorities promote uniformity and facilitate effective communication and collaboration in scientific research, technological advancements, and global trade.

In the International System of Units (SI), which is the most widely used system of measurement, there are seven base units: meter (length), kilogram (mass), second (time), ampere (electric current), kelvin (temperature), mole (amount of substance), and candela (luminous intensity). These base units are defined based on fundamental physical constants or natural phenomena, providing a reliable and reproducible foundation for measurement.

Standard units are typically defined and maintained by internationally recognized organizations like the International Bureau of Weights and Measures (BIPM) to ensure global consistency. These organizations establish precise definitions, measurement protocols, and calibration procedures for standard units, often using advanced scientific techniques and technologies.

The use of standard units simplifies scientific research, enables accurate engineering designs, ensures fair trade practices, and facilitates international cooperation. It allows for the seamless exchange of information and data, promotes quality assurance, and supports the development of common standards and regulations in various industries.

In summary, a standard unit is a measurement rule established by authority to provide a consistent and universally accepted reference for quantifying physical quantities. It is a fundamental aspect of scientific progress, technological advancements, and global collaboration.

for more such questions on measurement

https://brainly.com/question/24842282

#SPJ11

Doppler radars work by using radio waves that bounce off objects and thus the object can be tracked.

Doppler radars work by emitting a beam of energy from an antenna known as radio waves. The energy they release when they collide with airborne objects scatters in all directions, with some of it returning directly to the radar.

The quantity of energy returned to the radar increases with object size. We can now perceive raindrops in the atmosphere because of this.

The amount of time it takes for the energy beam to be delivered and returned to the radar also gives us the object's distance.

To learn more about Doppler radars, click:

https://brainly.com/question/28096266

#SPJ1

The total distance traveled by the block in a one full or complete cycle is  2A.

option C.

If a block on the end of a spring is pulled to position x = A and released. In one full cycle of its motion, it will travel the following distance as shown below;

x = A cos (ωt)

where;

During a half cycle the block will travel a total distance of A.

During another half cycle the block will travel a total distance of A.

The total distance traveled by the block in a one full or complete cycle is calculated as follows;

distance = A + A

distance = 2A

Learn more about distance of oscillation here: https://brainly.com/question/30426721

#SPJ1

Answer:

88.89 km/h.

Explanation:

D = S + T

   = 320km + 320km = 640km.

T = D/S

T1 = 320km / 80km/h = 4 hours

T2 = 320km / 100 km/h = 3.2 hours

Ttotal = T1 + T2 = 4 hours + 3.2 hours = 7.2 hours.

S = D/T

  = 640km / 7.2 hours

  = 88.89 km/h.

*Note:

S = Average speed.

D = Total distance.

T = Total time.

The average speed of the motorist for the entire trip is approximately 88.89 km/h.

To calculate the average speed of the motorist for the entire trip, we need to consider the total distance traveled and the total time taken. In this case, the motorist travels 320 km at 80 km/h and then another 320 km at 100 km/h.

First, let's calculate the time taken for each leg of the trip:

Time taken for the first 320 km at 80 km/h:

Time = Distance / Speed = 320 km / 80 km/h = 4 hours

Time taken for the second 320 km at 100 km/h:

Time = Distance / Speed = 320 km / 100 km/h = 3.2 hours

Now, let's calculate the total distance and total time for the entire trip:

Total distance = 320 km + 320 km = 640 km

Total time = 4 hours + 3.2 hours = 7.2 hours

Finally, we can calculate the average speed:

Average speed = Total distance / Total time = 640 km / 7.2 hours ≈ 88.89 km/h

For such more questions on speed

https://brainly.com/question/30000550

#SPJ11

The position of their center of mass is also shown. the square cuboids is the most stable. Hence option B is correct.

A cuboid is a six-sided solid known as a hexahedron in geometry. Quadrilaterals make up its faces. Cuboid is short for "like a cube". A cuboid is similar to a cube in that a cuboid may become a cube by varying the lengths of the edges or the angles between the faces.

The square cuboid has its center of mass on the center of square, the masses are uniformly distributed about it.

Hence option B is correct.

To know more about cuboid :

https://brainly.com/question/29568631

#SPJ1.

Answer: An object's velocity can be different from its average velocity when the object's velocity is changing over time.

Average velocity is calculated by dividing the total displacement of an object by the total time taken. It represents the overall motion of an object during a given time interval. If the object's velocity remains constant during that time interval, then its velocity and average velocity will be the same.

However, if the object's velocity is not constant and changes during the given time interval, then its velocity at any specific moment may be different from its average velocity. This occurs when the object's speed or direction changes at different points in time, resulting in variations in its instantaneous velocity.

To summarize, an object's velocity can differ from its average velocity when there are changes in its speed or direction during the time interval under consideration

Answer:

to prevent food spoilage until it can be consumed

Explanation:

 Gardens often produce too much food at one time—more than can be eaten before spoilage sets in. Preserving food also offers the opportunity to have a wide variety of foods year-round. It's economic.

The external force acting on the artillery shell is 2970 x 10⁴N, which is same as the force exerted by the shell on the ship. Both acts in the opposite directions.

Mass of the artillery shell, m = 1350

Acceleration of the artillery shell, a = 2.2 x 10⁴ m/s²

a) The mass of an object is inversely proportional to its acceleration, which is directly proportional to the net force acting onto it.

A moving object accelerates more quickly as the force pushing on it increases. A decline in acceleration is observed when the mass of the object increases.

So, the external force acting on the artillery shell is,

F = ma

F = 1350 x 2.2 x 10⁴

F = 2970 x 10⁴N

b) According to Newton's third law, the magnitude of force exerted by the shell on the ship will be equal to 2970 x 10⁴N, but it will be acting in the opposite direction.

To learn more about force, click:

https://brainly.com/question/30959077

#SPJ1

Answer:

[tex]W_{by}=9.00 \times 10^4 \ J\\\\W_{on}=-9.00 \times 10^4 \ J[/tex]

Option (c) is correct.

Explanation:

[tex]\boxed{\left\begin{array}{ccc}\text{\underline{Work done on/by a gas:}}\\W_{by}=P \Delta V \ or \ \int\limits^{V_f}_{V_0} {P} \, dV \\W_{on}=-P\Delta V \ or \ -\int\limits^{V_f}_{V_0} {P} \, dV \end{array}\right }[/tex]

Given:

[tex]P=1.8 \times 10^5 \ Pa\\\\V_0=1.2 \ m^3\\\\V_f=1.7 \ m^3[/tex]

Find:

[tex]W_{by}=?? \ J\\\\W_{on}=?? \ J[/tex]

(1) - Calculating the change in volume

[tex]\Delta V= V_f-V_0\\\\\Longrightarrow \Delta V=1.7-1.2\\\\\therefore \boxed{\Delta V=0.5 \ m^3}[/tex]

(2) - Calculating the work done by the gas

[tex]W_{by}=P \Delta V\\\\\Longrightarrow W_{by}=(1.8 \times 10^5)(0.5)\\\\\therefore \boxed{\boxed{W_{by}=9.00 \times 10^4 \ J}}[/tex]

(3) - Calculating the work done on the gas

[tex]W_{on}=-P \Delta V\\\\\Longrightarrow W_{on}=-(1.8 \times 10^5)(0.5)\\\\\therefore \boxed{\boxed{W_{on}=-9.00 \times 10^4 \ J}}[/tex]

Options (a) and (d) can be eliminated. Option (b) can be eliminated since there is no negative in front of the answer. This leaves the correct answer being option (c).

Answer:

reflect the light

refract the light

Answer:  60 Joules (J)

Explanation:

To compute the work done by a force, you can use the formula:

Work = Force × Distance × cosθ

In this case, the force applied is 300 N, and the distance is 20 cm (which can be converted to meters by dividing by 100, giving us 0.20 m).

The angle θ represents the angle between the direction of the force and the direction of displacement. Since the force is used to compress the spring, the displacement is in the same direction as the force, and the angle θ is 0 degrees. The cosine of 0 degrees is 1, so we can omit the cosine term.

Now we can calculate the work done:

Work = 300 N × 0.20 m

Work = 60 Joules (J)

Therefore, the work done by the force in compressing the spring is 60 Joules (J).

The weight at the foot of each glass will be the same because it is decided by the stature of the fluid column over it and the increasing speed due to gravity. Be that as it may, the weight applied by the fluid on the dividers of the holder will be diverse due to contrasts in thickness.

Since natural product juice incorporates a higher thickness than water, the mass of the same volume of natural product juice will be more noteworthy than that of water.

This implies that the constraint applied by the natural product juice on the dividers of the glass will be more prominent than the constraint applied by the water on the dividers of its glass, as the drive is straightforwardly corresponding to mass.

Subsequently, the weight of the glass of natural product juice will be higher than the weight of the glass of water.

In rundown, in spite of the fact that the weight at the foot of each glass will be the same, the weight applied by the fluid on the dividers of the holder will be diverse due to the contrasts in thickness, with the natural product juice applying a more noteworthy weight. 

To know more about pressure refer to this :

https://brainly.com/question/25736513

#SPJ1

Our intrepid hero has done 2332 kJ of work pushing the crate on the frictionless surface of the newly discovered planet.

The work done by the space traveler can be determined utilizing the recipe W = F x d, where W is work, F is power, and d is distance. To find the power, we can utilize the recipe F = m x a, where m is mass and an is speed increase. Connecting the given qualities, we get F = 220 kg x 2 m/s^2 = 440 N.

Presently we can compute the work done by increasing the power by the distance: W = 440 N x 5.3 km = 2332 kJ. Accordingly, our fearless legend has done 2332 kJ of work pushing the container on the frictionless surface of the newfound planet.

To learn more about work, refer:

https://brainly.com/question/31961577

#SPJ1