Energy is transported by mechanical waves perpendicular to wave motion. Energy is carried parallel to the wave motion by electromagnetic waves.
What characteristic separates electromagnetic waves in general from mechanical waves?Whether or not the waves require a medium for propagation determines one of their characteristics. This characteristic is also the basis for the main distinction between magnetic and electric waves. While electromagnetic waves can travel without a medium, mechanical waves can not.
What distinguishes electromagnetic waves from mechanical waves?In contrast to mechanical waves, electromagnetic waves can travel without a medium. This implies that microwaves can pass not only through solid objects like air and rock but also through empty space.
To know more about electromagnetic visit :
https://brainly.com/question/17057080
#SPJ4
The air pressure in a tank is measured using an inclined manometer whose arm is inclined 45 degree from the horizontal line. The densities of the air and water are .225 kg/m3 and 1000 kg/m3, respectively. Determine the gauge pressure of air in the tank. Air 6 cm 45 501 Pa 416 Pa 588 Pa 0.510 Pa
The gauge pressure of the air in the tank is 1349.3 Pa in an inclined manometer.
An inclined manometer is a device that measures the pressure of a gas by comparing it to the pressure of a liquid in a column that is inclined at a certain angle. In this case, the manometer is connected to a tank of air, and the column of liquid is inclined at an angle of 45 degrees from the horizontal line. To determine the gauge pressure of the air in the tank, we need to use the equation:
ΔP = ρgh
where ΔP is the pressure difference, ρ is the density of the fluid (in this case, water), g is the acceleration due to gravity, and h is the height difference between the two fluid levels.
In the manometer, the fluid level on one side is at a height of 6 cm and the other side is at an angle of 45 degrees, with pressure readings of 501 Pa and 416 Pa, respectively. We can use trigonometry to find the vertical height difference between the two fluid levels:
h = [tex]6 cm * sin(45) = 4.24 cm[/tex] = 0.0424 m
Next, we can calculate the pressure difference between the two sides of the manometer using the equation above:
ΔP = [tex](1000 kg/m^3 - 0.225 kg/m^3) * 9.81 m/s^2 * 0.0424 m[/tex] = 933.3 Pa
Finally, we can calculate the gauge pressure of the air in the tank by adding the pressure difference to the lower pressure reading:
P_gauge = 416 Pa + 933.3 Pa = 1349.3 Pa
Learn more about gauge pressure here:
https://brainly.com/question/19573649
#SPJ4
A bowling ball weighs 645 N.
What is the mass of the
bowling ball?
n = [?] kg
m
Answer:
Explanation:
To find the mass of an object, we can use the formula:
mass (m) = force (f) / acceleration (a)
Since the force on an object is equal to its weight, which is the force of gravity acting on it, we can use the equation:
mass (m) = weight (f) / acceleration (a)
where weight (f) = 645 N and acceleration (a) is the acceleration due to gravity, which is approximately 9.8 m/s^2 on the surface of the Earth.
So, we have:
mass (m) = 645 N / 9.8 m/s^2 = 66 kg
Therefore, the mass of the bowling ball is 66 kg.
A bowling ball weighs 645 N. then the mass of the bowling ball is 65.8 kg. Weight is gravitational force acting on the ball.
Given,
Weight W = 645 N
Acceleration due to gravity g = 9.8 m/s²
mass m = ?
The weight of the object is given by,
W = mg
645 = m*9.8
m = 65.8 Kg
Hence mass of the ball is 65.8 kg
To know more about mass :
https://brainly.com/question/11954533
#SPJ6.
how does wind speed help predict severe weather?
Answer:
Higher winds mean the possibility of severe weather.
Explanation:
High winds blow low pressure systems into our area, giving us bad weather.
is the wave nature of matter significant for bullets?
The wave nature of matter is generally not significant for bullets, which are macroscopic objects composed of many particles.
The wave-particle duality of matter is a fundamental property of subatomic particles, such as electrons and photons, and is observed at the quantum level. For larger objects, including bullets, classical mechanics provides a sufficient framework for describing their behavior. However, in some cases, such as the diffraction of electrons or neutrons passing through small openings, the wave nature of matter can have practical applications. In general, though, the wave nature of matter is not a significant factor in the behavior of bullets.
Learn more about wave nature:
brainly.com/question/29023881
#SPJ4
Rank each pendulum on the basis of the maximum kinetic energy it attains after release_ Rank from largest to smallest To rank items as equivalent; overlap them View Available Hint(s) Reset Help h -60 cm m = 2 kg h = 30 cm m=4kg h =30 cm m =2kg h =60 cm m =lkg h =45 cm m=3kg h=I5 cm m = 8 kg largest smallest The correct ranking cannot be determined_
Ranking the pendulums based on the maximum kinetic energy they attain after release, from largest to smallest, is not possible with the information provided.
What is its maximum kinetic energy ?The amplitude of the swing, the mass of the pendulum, and the height at which it is released are some of the variables that affect a pendulum's maximum kinetic energy. The height and mass of each pendulum are mentioned in the material; the there is no obvious pattern in the mass and height combinations of the pendulums that would permit a ranking based only on those variables.As a result, with the information provided, it is impossible to determine the pendulums' proper ranking.
To know more about kinetic energy , check out :
https://brainly.com/question/8101588
#SPJ4
If a person visits an exercise facility, buys a new piece of fitness/sporting equipment,or just starts planning to be active, which of the five stages of change for physicalactivity are they at?PlanningMaintenancePrecontemplationContemplation
If a person visits an exercise facility, buys a new piece of fitness or sporting equipment, or just starts planning to be active, they are likely in the "Contemplation" stage of change for physical activity.
What are the Five stages?
The five stages of change for physical activity are:
• Precontemplation: In this stage, the person is not yet considering a change in their physical activity behaviour.
• Contemplation: In this stage, the person is starting to think about making a change and may be weighing the pros and cons of becoming more active.
• Preparation: In this stage, the person has decided to make a change and is taking steps to start an exercise program, such as setting goals and making a plan.
• Action: In this stage, the person has actually started to incorporate physical activity into their routine.
• Maintenance: In this stage, the person has successfully integrated physical activity into their lifestyle and is maintaining the change over time.
Based on the information provided, the person visiting an exercise facility, buying new fitness equipment, or starting to plan to be active is likely in the Contemplation stage, as they are considering making a change in their physical activity behaviour.
To know more about stages of physical activity, Check out:
https://brainly.com/question/15604052
#SPJ4
.
a gamma ray of wavelength 1.00 × 10–8 cm has enough energy to remove an electron from a hydrogen atom. True or false?
This statement is True, a gamma ray of wavelength 1.00 × 10–8 cm has enough energy to remove an electron from a hydrogen atom.
Gamma rays are produced in the disintegration of radioactive atomic nuclei and in the decay of sure subatomic particles. The normally ordinary definitions of the gamma-ray and X-ray regions of the electromagnetic spectrum encompass a few wavelength overlap, with gamma-ray radiation having wavelengths which can be usually shorter than a few tenths of an angstrom (10−10 metre) and gamma-ray photons having energies which are extra than tens of hundreds of electron volts (eV).
There's no theoretical top limit to the energies of gamma-ray photons and no decrease limit to gamma-ray wavelengths; located energies currently expand up to 3 trillion electron volts—those extraordinarily excessive-power photons are produced in astronomical sources via currently unidentified mechanisms.
To learn more about Gamma ray visit here:
brainly.com/question/23281551
#SPJ4
would a plucked guitar string vibrate for a longer time or a shorter time if the instrument had no sounding board? why?
A plucked guitar string would vibrate for a shorter time if the instrument had no sounding board.
What is the use of sounding board?The sounding board, or soundboard, is a large, flat panel that amplifies the sound of the strings by vibrating along with them. This vibration increases the overall volume of the sound and also sustains the vibration of the strings for a longer period of time.
When a guitar string is plucked, it vibrates and creates sound waves that travel through the air and into the listener's ear. The sounding board helps to amplify these sound waves, making the sound of the string louder and more resonant. The sounding board also helps to sustain the vibration of the string by reflecting and reinforcing the sound waves back into the string, keeping it vibrating for a longer period of time.
Without a sounding board, the string would vibrate for a shorter time because the sound waves generated by the string would not be reinforced and amplified in the same way. The vibration of the string would be damped more quickly, causing the sound to decay more quickly and the string to vibrate for a shorter period of time.
To know more about musical instruments, visit:
brainly.com/question/16191430
#SPJ4
when placed inside of a magnetic field, nmr active nuclei act in what way?
NMR active nuclei act in a way that causes them to absorb and emit electromagnetic radiation when placed inside of a magnetic field. This allows them to be used to measure the magnetic properties of the sample.
What is the radiation ?Radiation is a form of energy that is released from an atom in the form of electromagnetic waves or particles. It occurs naturally, such as from the sun, and can also be generated artificially, such as through medical or industrial processes. Radiation is all around us, and takes many forms. It can be either ionising or non-ionising radiation. Ionising radiation has enough energy to remove electrons from atoms, thus creating ions. This type of radiation is known to be hazardous and can damage living tissue, such as cells in the body. Non-ionising radiation, on the other hand, does not have enough energy to damage tissue and is therefore considered less hazardous. Examples of non-ionising radiation are radio waves, microwaves and visible light.
To learn more about radiation
https://brainly.com/question/1408043
#SPJ4
What two things must you know to describe the motion of an object?
Both the direction and the speed of an object's motion must be included when describing motion. You also have to reveal its location at a specific time.
What are some ways to describe how an object moves?Position, direction, speed, and acceleration are used to characterise an object's motion. Motion is the gradual alteration of a body's position or orientation. Translational motion is defined as the movement of an object along a line or a curve.
Which two numbers are appropriate to use when describing motion?Scalars or vectors are the two types of variables that are typically employed to describe motion. A quantity whose magnitude and direction may both be used to fully describe it is referred to as a vector. Any quantity whose magnitude alone can adequately explain it is referred to as a scalar.
To know more about motion visit:
https://brainly.com/question/22810476
#SPJ4
If a car moves 12km north,19km east, and 12km south, what is its displacement?
Is NOCl Polar or Nonpolar?
NOCl is a polar molecule due to its trigonal pyramidal shape and polar covalent bond between nitrogen and chlorine.
NOCl (Nitrosyl chloride) is a polar particle because of its sub-atomic calculation and the extremity of its bonds. The particle has a three-sided pyramidal shape with a solitary sets of electrons on the nitrogen iota and a polar covalent connection between the nitrogen and chlorine molecules.
The electronegativity distinction among nitrogen and chlorine makes a dipole second in the NOCl particle, with the nitrogen iota conveying a fractional negative charge and the chlorine molecule conveying a halfway sure charge. This extremity permits NOCl to show intermolecular powers, for example, dipole associations and hydrogen holding.
As a polar particle, NOCl has a higher limit and is more dissolvable in polar solvents contrasted with nonpolar solvents. The extremity of NOCl makes it valuable in different modern applications like in the creation of colors and drugs.
To learn more about Polar and Nonpolar, refer:
https://brainly.com/question/29206689
#SPJ4
What is the Lewis structure for PF6?
The Lewis structure for PF6 has a central phosphorus atom with six surrounding fluorine atoms. Each fluorine atom is bonded to the phosphorus atom by a single bond and has a lone pair of electrons.
PF6 is a polyatomic ion, which means it has a charge. In this case, the charge is -1. The Lewis structure shows how the atoms in the ion are connected and how the electrons are distributed.
The six fluorine atoms form a symmetric octahedral arrangement around the phosphorus atom. Each fluorine atom contributes one electron to form a single bond with the phosphorus atom. The lone pairs on each fluorine atom are not involved in bonding and are localized on the atom.
To know more about the Lewis structure, here
brainly.com/question/29816192
#SPJ4
Una pelota de plástico de 12. 3 g cuelga de un hilo de 28. 6 cm que esta sujeto a una pared vertical. Un campo eléctrico se encuentra en el cuarto. Cuando se le da a la pelota una carga de -1. 11 mC, se observa que permanece suspendida haciendo un ángulo de 17. 4° entre el hilo y la pared. ¿Cuál es la magnitud del campo eléctrico y su dirección?
La magnitud del campo eléctrico es de 4.03 x 10⁶ N/C y su dirección es perpendicular a la pared y hacia arriba.
How to determine Campo electricoEl campo eléctrico es de 12,29 N/C con dirección hacia arriba. Esto se calcula usando el principio de conservación de la energía, el cual afirma que el trabajo realizado para cargar la pelota de plástico de 12,3 g con una carga de -1,11 mC es igual al trabajo necesario para sostenerla en un ángulo de 17,4° con el hilo de 28,6 cm.
Así, la magnitud del campo eléctrico se calcula usando la siguiente fórmula:
E = W/q
= (mgh x sin(θ))/q
= (0,0123 x 9,81 x 28,6 x sin(17,4°))/(-1,11x10⁻³)
= 12,29 N/C
La magnitud del campo eléctrico se puede encontrar utilizando la ley de Coulomb y la trigonometría. La ley de Coulomb establece que la fuerza eléctrica entre dos cargas es igual a la constante de Coulomb (k) multiplicada por el producto de las dos cargas dividido por la distancia entre ellas al cuadrado.
En este caso, la fuerza eléctrica es igual a la fuerza gravitacional, ya que la pelota permanece suspendida. Por lo tanto, podemos escribir:
Fe = Fg
k x q₁ x q₂ / r² = m x g
Donde Fe es la fuerza eléctrica, Fg es la fuerza gravitacional, q₁ y q₂ son las cargas, r es la distancia entre ellas, m es la masa de la pelota y g es la aceleración debida a la gravedad.
Utilizando la trigonometría, podemos encontrar la distancia entre la pelota y la pared, que es igual a la longitud del hilo multiplicada por el coseno del ángulo entre el hilo y la pared. Por lo tanto, r = 28.6 cm x cos(17.4°) = 26.9 cm.
Sustituyendo los valores conocidos en la ecuación y resolviendo para q_2, obtenemos:
q₂ = (m x g x r²) / (k xq1)
q₂ = (12.3 g x26.9 cm²) / (9 x 10⁹ N x m²/C² x -1.11 x 10⁻³ C)
q₂ = -2.99 x 10⁻⁶ C
La magnitud del campo eléctrico es igual a la fuerza eléctrica dividida por la carga, por lo que:
E = Fe / q₂
E = (m x g) / q₂
E = (12.3 g x 9.8 m/s²) / (-2.99 x 10⁻⁶ C)
E = -4.03 x 10⁶ N/C
La dirección del campo eléctrico es perpendicular a la pared y hacia arriba, ya que la pelota está suspendida y la fuerza eléctrica es igual a la fuerza gravitacional.
En conclusión, la magnitud del campo eléctrico es de 4.03 x 10⁶ N/C y su dirección es perpendicular a la pared y hacia arriba.
Learn more about magnetic field at https://brainly.com/question/14848188
#SPJ11
If the tides are caused by the gravitational pull of the Moon, why are there multiple tide cycles within one rotation of the moon?
Answer:
Because the sun attracts the earth, and there will be a high tide when the sun is about overhead and a low tide when the earth is between the sun and the water causing the tide.
A long, straight wire lies along the xx-axis and carries current II = 65. 0 AA in the +xx-direction. A small particle with mass 4. 00×10−6kg4. 00×10−6kg and charge 8. 00×10−3C8. 00×10−3C is traveling in the vicinity of the wire. At an instant when the particle is on the yy-axis at yy = 8. 00 cmcm, its acceleration has components ax=−5. 00×103m/s2ax=−5. 00×103m/s2 and ay=+9. 00×103m/s2ay=+9. 00×103m/s2
The magnetic flux (B) is calculated to be -6.15×10^-5 T in the -xx-direction.
The magnetic force on a charged particle moving in a magnetic field is given by:
F = qvBsinθ
where q is the charge of the particle, v is its velocity, B is the magnetic field, and θ is the angle between the velocity and the magnetic field.
In this problem, the particle is moving parallel to the yy-axis, so its velocity vector is in the +yy-direction. The magnetic field is in the +xx-direction due to the current in the wire. Therefore, the angle between the velocity and the magnetic field is 90 degrees, and sinθ = 1.
The magnetic force on the particle is given by:
F = qvB
The acceleration of the particle is related to the net force acting on it by:
F = ma
where m is the mass of the particle and a is its acceleration.
Combining these equations, we have:
qvB = ma
Solving for B, we get:
B = (ma)/(qv)
Substituting the given values, we get:
B = [(4.00×10^-6 kg) × (-5.00×10^3 m/s^2)] / [(8.00×10^-3 C) × (65.0 A)]
B = -6.15×10^-5 T
The negative sign indicates that the magnetic field is in the opposite direction to the +xx-direction of the wire, which means that it is in the -xx-direction.
Therefore, the correct answer is -6.15×10^-5 T in the -xx-direction.
Learn more about magnetic flux :
https://brainly.com/question/18597382
#SPJ4
Question 2 of 10
A scientist adds different amounts of salt to 5 bottles of water. She then
measures how long it takes for the water to boil. What is the responding
variable in this experiment?
A. The kind of bottles used
B. The brand of salt used
C. The time it takes for the water to boil
D. The amount of salt added to the water
The responding variable in this experiment on adding salt to bottles of water is C. The time it takes for the water to boil.
How to find the responding variable ?The responding variable in this experiment is the time it takes for the water to boil, which is being measured and recorded by the scientist. This variable is dependent on the independent variable, which in this case is the amount of salt added to each bottle of water.
The scientist is manipulating the independent variable (the amount of salt added) to observe the effect it has on the responding variable (the time it takes for the water to boil).
Find out more on responding variable at https://brainly.com/question/28417576
#SPJ1
When you encounter a new or frightening situation, your body launches a stress response commonly known as
When you encounter a new or frightening situation, your body launches a stress response commonly known as "fight-or-flight” response.
What is "fight-or-flight” response?This is referred to as a physiological reaction that occurs in response to a perceived harmful event, attack, or threat to survival.
It involves the body responding to stress through different types of changes in the body system such as the heart pounding faster, muscles tighten, blood pressure rises, breath quickens, and your senses become sharper which is therefore the reason why it was chosen as the correct choice.
Read more about Stress response here https://brainly.com/question/1131417
#SPJ1
A 6-kg bucket of water is being pulled straight up by a string at a constant speed. (a) What is the tension in the rope? (b) At a certain point the speed of the bucket begins to change. The bucket now has an upward constant acceleration of magnitude 3 m/s. What is the tension in the rope now? (c) Now assume that the bucket has a downward acceleration, with a constant acceleration of magnitude 3 m/s. Now what is the tension in the rope?
(a) When the bucket is being pulled up at a constant speed, the tension in the rope must be equal to the weight of the bucket and the water. The weight of the bucket and water is given by:
[tex]w = m*g[/tex]
where m is the mass of the bucket and water (6 kg in this case), and g is the acceleration due to gravity [tex](9.8 m/s^2).[/tex] So,
[tex]w = 6 kg * 9.8 m/s^2 = 58.8 N[/tex]
Therefore, the tension in the rope must also be 58.8 N.
(b) When the bucket has an upward constant acceleration of [tex]3 m/s^2,[/tex] the tension in the rope must be greater than the weight of the bucket and water, in order to provide the additional force needed to accelerate the bucket upwards. The tension in the rope can be calculated using the equation:
[tex]T - w = m*a[/tex]
where T is the tension in the rope, w is the weight of the bucket and water (58.8 N), m is the mass of the bucket and water (6 kg), and a is the acceleration of the bucket (3 m/s^2). Substituting these values, we get:
[tex]T - 58.8 N = 6 kg * 3 m/s^2\\T - 58.8 N = 18.0 N\\T = 76.8 N[/tex]
Therefore, the tension in the rope when the bucket has an upward constant acceleration of[tex]3 m/s^2[/tex] is 76.8 N.
(c) When the bucket has a downward constant acceleration of 3 m/s^2, the tension in the rope must be less than the weight of the bucket and water, in order to balance out the force of gravity pulling the bucket downwards. The tension in the rope can be calculated using the same equation as before:
[tex]T - w = m*a[/tex]
where T is the tension in the rope, w is the weight of the bucket and water (58.8 N), m is the mass of the bucket and water (6 kg), and a is the acceleration of the bucket (-3 m/s^2) because it is now going downwards. Substituting these values, we get:
[tex]T - 58.8 N = 6 kg * (-3 m/s^2)\\T - 58.8 N = -18.0 N\\T = 40.8 N[/tex]
Therefore, the tension in the rope when the bucket has a downward constant acceleration of [tex]3 m/s^2[/tex] is 40.8 N.
Learn more about tension, here:
https://brainly.com/question/30033702
#SPJ1
Determine whether an interference pattern is observed on other side of the slits in each of the following experiments. a. An electron beam is aimed at two closely spaced slits. The beam is attenuated to produce only 1 electron per minute. b. An electron beam is aimed at two closely spaced slits. A light beam is placed at each slit to determine when an electron goes through the slit. c. A high-intensity light beam is aimed at two closely spaced slits. d. A gun is fired at a solid wall containing two closely spaced slits.
Two slits with close spacing are the target of an electron beam. It is possible to tell when an electron passes through a slit by placing a laser beam at each one. (Position b)
What does intensity look like?The amount of physical power the body consumes during an activity is known as its intensity and is expressed as a percentage of the maximal oxygen consumption. To walk a mile in 20 minutes, for instance, a certain amount of exercise intensity is required.
How do people behave with intensity?Arousal, dedication, effort, assertiveness, and attentional concentration are just a few of the traits that can be used to measure how well a person does in a given activity or sector. additionally known as performance intensity.
To know more about Intensity visit:
https://brainly.com/question/17583145
#SPJ4
how do we know what the surface of venus looks like?
A few ways that scientists have been able to study the surface of Venus are:
Radar imaging: This involves sending radar signals from a spacecraft and measuring the time it takes for the signals to bounce back.Spacecraft missions: These missions have used a variety of instruments, including cameras, spectrometers, and radar, to gather data about the planet.Ground-based observations: Astronomers have used telescopes to study the planet's brightness and other features, as well as to map its surface.How does surface of Venus look ?The surface of Venus is a fascinating and unique environment, with a number of unique features and conditions. Here are some of the most notable characteristics of the surface of Venus:
Volcanoes: Venus has a large number of volcanoes, many of which are still active. Some of the largest volcanoes on Venus are among the largest in the solar system.Plains: Much of the surface of Venus is covered by vast, flat plains, which are thought to have formed from volcanic eruptions.Mountains: There are also a number of mountain ranges on Venus, including the Maxwell Mountains, which are some of the tallest in the solar system.Craters: The surface of Venus is also dotted with impact craters, which are the result of collisions with asteroids and other objects.Extreme conditions: The surface of Venus is characterized by extreme conditions, including high temperatures, a toxic atmosphere, and crushing atmospheric pressure. These conditions make it difficult for spacecraft to operate and for life to exist.The various methods have allowed scientists to learn a great deal about the surface of Venus, including its geological features, such as its numerous volcanoes and vast plains, as well as its extreme atmospheric conditions, such as its thick and toxic atmosphere.
To know more about Surface of Venus, visit:
https://brainly.com/question/30391233
#SPJ4
what condition is necessary for heat to flow between two objects?
Temperature difference, Material separating the objects, Heat transfer mechanism, Contact area & Time are the conditions necessary for heat flow.
What are conditions for heat flow?The following conditions are necessary for heat to flow between two objects:
Temperature difference: Heat always flows from an object with a higher temperature to an object with a lower temperature, so a temperature difference between the two objects is necessary for heat to flow.
Material separating the objects: Heat can only flow between two objects if there is a material that separates them. The type of material and its thermal conductivity will affect the rate at which heat flows.
Heat transfer mechanism: Heat can be transferred between objects through conduction, convection, or radiation. The specific heat transfer mechanism will depend on the conditions of the objects and the material separating them.
Contact area: The larger the contact area between the two objects, the greater the heat transfer will be.
Time: Heat transfer is a process that occurs over time, so a sufficient amount of time must be allowed for heat to flow from one object to the other.
To know more about heat flow, visit:
brainly.com/question/14437874
#SPJ4
The figure shows an arrangement in which four disks are suspended by cords. The longer, top cord loops over a frictionless pulley and pulls with a force of magnitude 86.5 N on the wall to which it is attached. The tensions in the shorter cords are T1 = 55.6 N, T2 = 36.5 N, and T3 = 9.6 N. What are the masses of (a) disk A, (b) disk B,(c) disk C, and (d) disk D?
The mass of disk A is approximately 5.67 kg, the mass of disk B is approximately 3.72 kg, the mass of disk C is approximately 0.98 kg, the mass of disk D is approximately 2.53 kg.
To solve for the masses of the disks, we can use the fact that the tension in each cord is equal to the weight of the disk it supports, or:
T1 = m_A * g
T2 = m_B * g
T3 = m_C * g
T4 = m_D * g
where m_A, m_B, m_C, and m_D are the masses of disks A, B, C, and D, respectively, g is the acceleration due to gravity, and T1, T2, T3, and T4 are the tensions in the cords.
We can also use the fact that the total force on the system is equal to the force applied by the longer cord, or:
T1 + T2 + T3 + T4 = F_applied
where F_applied is the force of magnitude 86.5 N applied by the longer cord.
Using these equations, we can solve for the masses of the disks:
(a) To find the mass of disk A, we can use the equation for T1:
T1 = m_A * g
Substituting T1 = 55.6 N and g = 9.8 m/s^2, we get:
m_A = T1 / g
= 55.6 N / 9.8 m/s^2
≈ 5.67 kg
Therefore, the mass of disk A is approximately 5.67 kg.
(b) To find the mass of disk B, we can use the equation for T2:
T2 = m_B * g
Substituting T2 = 36.5 N and g = 9.8 m/s^2, we get:
m_B = T2 / g
= 36.5 N / 9.8 m/s^2
≈ 3.72 kg
Therefore, the mass of disk B is approximately 3.72 kg.
(c) To find the mass of disk C, we can use the equation for T3:
T3 = m_C * g
Substituting T3 = 9.6 N and g = 9.8 m/s^2, we get:
m_C = T3 / g
= 9.6 N / 9.8 m/s^2
≈ 0.98 kg
Therefore, the mass of disk C is approximately 0.98 kg.
(d) To find the mass of disk D, we can use the equation for T4:
T4 = m_D * g
Substituting T4 = (F_applied - T1 - T2 - T3) = (86.5 N - 55.6 N - 36.5 N - 9.6 N) = 24.8 N and g = 9.8 m/s^2, we get:
m_D = T4 / g
= 24.8 N / 9.8 m/s^2
≈ 2.53 kg
Therefore, the mass of disk D is approximately 2.53 kg.
Learn more about tension here:
https://brainly.com/question/11348644
#SPJ4
3. A baseball player leads off the game and hits a long home run. The ball leaves the bat at
an angle of 30.00 from the horizontal with a velocity of 40.0 m/s. How far will it travel in
the air?
A baseball player launches a big home run to start the game. The ball leaves the bat with a speed of 40.0 m/s and an angle of 30.0° from the horizontal.
What is Projectile Motion?An item or particle that is propelled into a gravitational field, for example from the surface of the Earth, and moves across a curved route only under the influence of gravity is said to be experiencing projectile motion. Most calculations make the assumption that the effects of air resistance are passive and insignificant in the specific instance of Earth projectile motion. The curving path of objects in projectile motion was proved by Galileo to be a parabola, but it could also be a straight line in the specific situation when it is hurled directly upwards. One such trajectory is a ballistic trajectory, which is the study of such motions.
To know more about above topic visit:
https://brainly.com/question/29545516
#SPJ1
Replace the loading acting on the beam by a single resultant force. specify where the force act, measured from B
The question is incomplete but the resultant force would act along the straight lines that were holding the beam.
What is the resultant force?
The resultant force, also known as the net force, is the single force that has the same effect as all of the individual forces acting on an object. It represents the overall effect of all forces on an object, taking into account their magnitude, direction, and type (compressive, tensile, frictional, etc.).
The concept of the resultant force is important in mechanics and engineering, as it determines the motion of an object. For example, if the net force acting on an object is zero, the object is said to be in a state of equilibrium and will not accelerate or change its velocity. On the other hand, if the net force on an object is not zero, the object will accelerate in the direction of the net force.
Learn more about net force:https://brainly.com/question/29261584
#SPJ1
When a boxer moves into an oncoming punch, the force experienced is
The force experienced when the boxer moves into an oncoming punch will increased due to less time period of contact.
When a mass moves in space, it carries some momentum and the momentum is defined as per the second law of motion by Newton in the following manner,
Force = change in momentum/time of contact
Change in momentum = force x time of contact.
The time of contact will decide the amount of momentum when the force is constant.
When the boxer moves towards an oncoming punch, the force experienced is increased because the time period required for the contact is decreased to a very low level.
To learn more about force,
brainly.com/question/29268524
#SP J4
How do you convert joules to eV?
To convert joules (J) to electronvolts (eV), you can use the conversion factor of 1 eV = [tex]1.60218 * 10^-^{19}[/tex]J. This means that one electronvolt is equivalent to the amount of energy gained by an electron when it moves through a potential difference of one volt.
In physics, an electronvolt is the measure of an amount of kinetic energy gained by a single electron accelerating from rest through an electric potential difference of one volt in vacuum.
To convert joules to electronvolts, you can use the following formula:
Energy in eV = (Energy in J) / [tex](1.60218 * 10^-^{19})[/tex]
For example, if you have an energy value of 1.5 J, you can convert it to electronvolts using the formula:
Energy in eV = 1.5 J / [tex](1.60218 * 10^-^{19})[/tex] ≈ 9.35 x[tex]10^{18}[/tex] eV
Therefore, 1.5 J is equivalent to approximately 9.35 x [tex]10^{18}[/tex] electronvolts.
For such more questions on Electronvolts
https://brainly.com/question/30145077
#SPJ4
What is electric boogaloo meaning?
The term "electric boogaloo" originated from the 1984 movie "Breakin' 2: Electric Boogaloo."
The movie is a sequel to the 1984 film "Breakin'" and features street dancers battling a developer who wants to tear down their community center.
The term "electric boogaloo" has since been used to refer to a sequel or a continuation of something, often in a humorous or satirical way. For example, someone might say "The Hangover 2: Electric Boogaloo" to refer to the sequel of the movie "The Hangover." It is often used in internet memes and on social media as a way to poke fun at sequels or continuations of events.
Since the release of the movie, the phrase "Electric Boogaloo" has been used in various ways in popular culture, including as a humorous way to indicate a sequel, a way to mock or criticize a sequel or follow-up, or simply as a way to add emphasis to a statement.
To know more about electric boogaloo here:
https://brainly.com/question/28932217#
#SPJ11
imagine a planet moving in a perfectly circular orbit around the sun. is this planet experiencing acceleration?
Yes, the planet is experiencing acceleration. If we imagine a planet moving in a perfectly circular orbit around the sun. is this planet experiencing acceleration?
Acceleration is defined as the rate of change of velocity, and since the planet is moving in a circular orbit, it is constantly changing its direction, resulting in an acceleration towards the center of the orbit. This is known as centripetal acceleration, and it is what keeps the planet in its circular path and prevents it from flying off into space. The magnitude of this acceleration depends on the speed of the planet, its distance from the sun, and the mass of the sun.
In conclusion, even though the planet is moving in a circular path and its speed may not be changing, its direction is constantly changing, causing it to experience acceleration. This centripetal acceleration ensures that the planet remains in its orbit around the sun.
Learn more about acceleration
brainly.com/question/12734730
#SPJ4
the iris, or the colored part of your eye, controls the amount of light passing through. from there, it then hits the lens. this is the clear structure inside the eye that focuses light rays onto the retina. (T/F)
True - the iris, or the colored part of your eye, controls the amount of light passing through. from there, it then hits the lens. this is the clear structure inside the eye that focuses light rays onto the retina.
The iris is the colored part of the eye and it is made up of two layers of muscles. These muscles control the amount of light that passes through the pupil, which is the black dot in the center of the iris.
The iris opens and closes to allow more or less light to enter the eye. When it is bright outside, the iris closes and when it is darker outside, the iris opens.
The light that passes through the pupil then hits the lens. The lens is a transparent structure inside the eye that is curved and helps to focus the light onto the retina. The lens is flexible and can change shape to help focus the light.
This focused light is then sent to the retina, which contains light-sensitive cells called rods and cones. These cells convert the light into electrical signals, which are then sent to the brain where they are interpreted as images.
To know more about rods and cones,
https://brainly.com/question/13255224
#SPJ4