Which of the following is the correct Lewis dot structure of c4?

Answer:

178.5g of NaCl is the maximum amount that can be dissolved

Explanation:

Solubility is defined as the maximum amount of solute that can be dissolved in aAt 20°C, the solubility of NaCl is 35.7g per 100g of water at 20°C. That means the maximum amount that can be dissolved of NaCl is:

500g water * (35.7g NaCl / 100g water) =

M₁ = 2.0 mol/L

V₁ = 1 L

M₂ = 0.1 mol/L

V₂

M₁V₁ = M₂V₂

V₂ = M₁V₁ / M₂

V₂ = (2.0 mol/L)(1 L) / (0.1 L)

V₂ = 20 L

Therefore, the volume of the new solution will be 20 L.

#ILoveChemistry

#ILoveYouShaina

M₁V₁ = M₂V₂

V₂ = M₁V₁ / M₂

V₂ = (2.0 mol/L)(1 L) / (0.1 L)

V₂ = 20 L

THE BEST ANSWER IS

O 20L

The question is incomplete, the complete question is:

A 7.00 L tank at [tex]21.4^oC[/tex] is filled with 5.43 g of sulfur hexafluoride gas and 14.2 g of sulfur tetrafluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction and partial pressure of each gas. Round each of your answers to significant digits.

Answer: The mole fraction of sulfur hexafluoride is 0.221 and that of sulfur tetrafluoride is 0.779

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.  The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of sulfur hexafluoride = 5.43 g

Molar mass of sulfur hexafluoride = 146.06 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of sulfur hexafluoride}=\frac{5.43g}{146.06g/mol}=0.0372mol[/tex]

Given mass of sulfur tetrafluoride = 14.2 g

Molar mass of sulfur tetrafluoride = 108.07 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of sulfur tetrafluoride }=\frac{14.2g}{108.07g/mol}=0.1314mol[/tex]

Total moles of gas in the tank = [0.0372+ 0.1314] mol = 0.1686 mol

Mole fraction is defined as the moles of a component present in the total moles of a solution. It is given by the equation:

[tex]\chi_A=\frac{n_A}{n_A+n_B}[/tex] .....(2)

where n is the number of moles

Putting values in equation 2, we get:

[tex]\chi_{SF_6}=\frac{0.0372}{0.1686}=0.221[/tex]

[tex]\chi_{SF_4}=\frac{0.1314}{0.1686}=0.779[/tex]

Hence, the mole fraction of sulfur hexafluoride is 0.221 and that of sulfur tetrafluoride is 0.779

Answer:

C H₄ + C Cl₄ = 2 (C H₂ Cl₂)

‎‎‎‎‎‎‎‎‎

Answer:

Nhiệt dung riêng của đồng là  

380

J

/

k

g

.

K

Explanation:

Answer:

1.49 × 10⁹ years

Explanation:

Step 1: Calculate the rate constant (k) for the nuclear decay of U-235

The decay follows first-order kinetics with a half-life (t1/2) of 703 × 10⁶ years. We can calculate "k" using the following expression.

k = ln2/ t1/2 = ln2 / 703 × 10⁶ y = 9.86 × 10⁻¹⁰ y⁻¹

Step 2: Calculate the time elapsed (t) so that the final amount ([U]) is 23.0% of the initial amount ([U]₀)

For first order kinetics, we will use the following expression.

ln ([U]/[U]₀) = -k × t

ln (0.230[U]₀/[U]₀) = -9.86 × 10⁻¹⁰ y⁻¹ × t

ln 0.230 = -9.86 × 10⁻¹⁰ y⁻¹ × t

t = 1.49 × 10⁹ y

Answer: It is true that Your friend should release the [tex]Cl_{2}[/tex] first.

Explanation:

The velocity of particles of a gas is inversely proportional to the mass of gas. This means that more is the mass of gas less will be its velocity.

Or, more will be the mass of gas more slowly it will move from one place to another.

The molar mass of chlorine gas is more than the molar mass of hydrogen gas. Therefore, chlorine gas will move slowly.

So, your friend should release the [tex]Cl_{2}[/tex] gas first and then according to the length of room you should release the [tex]H_{2}[/tex] gas.

Thus, we can conclude that it is true that Your friend should release the [tex]Cl_{2}[/tex] first.

Answer:

The intensity of the color directly changes in response to the concentration

Explanation:

One of the major indicators of the concentration of a solution is the colour of the solution.

The colour of the solution changes as the concentration of the solution changes. If the solution becomes more concentrated, the colour of the solution becomes deeper. If the solution becomes more dilute, the colour of the solution becomes lighter.

It then follows that, the intensity of the color of a solution directly changes in response to the concentration of the solution.

Answer:

Concentration of unknown solution is 0.0416 M

Explanation:

As we know  

Absorbance is equal to the product of molar absorptivity of KMnO4 m, path length and concentration

From the given set of graphical data, it is clear that the absorbance vs concentration is a straight line.  

From the graph, we can obtain-  

Y = 5.73 X – 0.0065

Absorbance = 0.232

0.232 = 5.73 X – 0.0065

X = 0.0416  

Concentration of unknown solution is 0.0416 M

Answer:

i think formula is PV=K?

Explanation:

Answer:

gamma rays > X-rays > ultraviolet radiation > visible light > infrared > radio waves.

Explanation:

Electromagnetic waves are those waves that require no material medium for propagation. They can travel through space and they all move at the speed of light.

Electromagnetic waves are composed of both electric and magnetic fields which are mutually at right angles to each other.

The order of decreasing energy of electromagnetic waves is;

gamma rays > X-rays > ultraviolet radiation > visible light > infrared > radio waves.

Answer:

liquid is the right answer k

Answer:

liquid

Explanation:

Answer:

The answer is B.

Explanation:

Answer:

NA+

Explanation:

NA+

hope help

it's NA+

Write the formula of sodium ion.

[tex]\implies {\blue {\boxed {\boxed {\purple {\sf { {Na}^{ + } }}}}}}[/tex]

[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]

Answer:

it is b step by step

Explanation:

The naming of this compound is 2,3,5,6 tetramethyl-4-octane.

Hence, option (B) is correct answer.

A ketone is functional group which contains the carbonyl group that is -C = O. The structure for ketone is R¹ - C = O - R² where R¹ and R² are alkyl group or aryl group.

Here we can see that the longest carbon chain is Octane. And the functional group is here ketone so suffix is -one. Now starting the number from the left hand side. We can see that on 2, 3,5,6 positions methyl group is attached in this chain. On 4th position ketone group is attached.

So the naming of the ketone is 2,3,5,6 tetramethyl-4-octane.

Thus, from above conclusion we can say that the naming of this compound is 2,3,5,6 tetramethyl-4-octane.

Hence, option (B) is correct answer.

Learn more about the Ketone function group here: https://brainly.com/question/27425066

#SPJ2

Answer:

A colloidal system in which liquid is a dispersed phase and solid is dispersion medium is known as Gel.

Explanation:

Answer: Pressure of the gas is 0.129375 atm when the volume of the vessel increased by a factor of 16.00.

Explanation:

The formula for ideal gas equation is as follows.

[tex]PV = Nk_{b}T[/tex]

where,

[tex]k_{b}[/tex] = Boltzmann constant

N = number of moles

That can also be written as:

[tex]\frac{PV}{T} = constant[/tex]

As pressure and volume are inversely proportional to each other. So, if one of the state variable is increased then the other one will decrease or vice-versa.

So, if volume of the vessel increased by a factor of 16.00 then it means pressure is decreased by a factor of 16.00

Therefore, final volume is as follows.

[tex]65.8 L \times 16.00\\= 1052.8 L[/tex]

Now, final pressure is as follows.

[tex]\frac{2.07}{16.00}\\= 0.129375 atm[/tex]

Initially the product of pressure and volume is as follows.

[tex]PV = 2.07 \times 65.8\\= 136.206[/tex]

Hence, if volume of the vessel increased by a factor of 16.00 and pressure is decreased by a factor of 16.00 then its product is as follows.

[tex]PV = 0.129375 \times 1052.8\\= 136.206[/tex]

Here, product of pressure and volume remains the same.

Thus, we can conclude that pressure of the gas is 0.129375 atm when the volume of the vessel increased by a factor of 16.00.

Answer:

còmo supòtànté insígídà pàtàtàk

Answer:

sorry i cant give the answer but you can gi end check in answer sheet of this becoz i had same question in exam in chemistry so i revised then i checked the answer if you want to check answer go to www.coachscotchemistry.com there you xan find the answer

Answer:

Explanation:

The solution of known concentration is expressed as molarity. Molarity is the mole fraction of solute (i.e. the dissolved substance) per liter of the solution, Molarity is also commonly called molar concentration.

Mathematically;

[tex]\mathtt{Molarity = \dfrac{moles \ of \ solute}{ liters \ of \ solution}}[/tex]

To copy and complete the road map from the given question, we have the following array:

      Volume A (L)

               ↓

d. multiplied by the molarity of A

               ↓

          moles A

               ↓

b. multiplied by the moles of B / moles of A

               ↓

         moles B

               ↓

c. divided by the molarity of B

               ↓

        volume B (L)

Answer:

Identify the indicated protons in the following molecules as unrelated, homotopic, enantiotopic, or diastereotopic. a) Methyls a & b: _________ b) Ha & Hc: ________

Explanation:

Homotopic hydrogens:

Consider two hydrogens in the given molecule and replace one by one with a different atom say for example deuterium, then if the two molecules formed by replacing hydrogens are the same then the two hydrogens are called homotopic hydrogens.

After replacing the two hydrogens with a different atom then, enantiomers are formed then, the two hydrogens are called enantiotopic hydrogens.

After replacing the two hydrogens with a different atom then, diastereomers are formed then, the two hydrogens are called diastereotopic hydrogens.

In the methyl group, select two hydrogens and replace one hydrogen atom with a D-atom name the compound.

Again replace another hydrogen atom with D-atom.

Name it.

If both are the same then, the hydrogens are homotopic and they are shown below:

Hence, they are homotopic protons.

Answer: Hello I was able to find the missing options related to your question online but I couldn't attach them hence I just used them to provide the relevant solution

answer:

Explanation:

OPEN end of the tube down. Continue tapping until the sample. Is a couple of mm high Then, with the Closed end of the tube down, tap the sample down slowly or drop tube into a longer/larger tube to move the sample down faster. Finally, make sure that you can see  sample clearly in the magnifier when placed in the melting point apparatus before turning on the heat.

Answer:

Charles's law states that the volume of a gas is directly proportional to the temperature of the gas, while pressure and number Of moles are kept constant (V/T = constant). All temperatures must be in kelvins when used in gas law calculations.

Boyle's law states that the volume of the gas varies inversely to the pressure on the gas, while temperature and number of moles are kept constant (PV = constant).

Avogadro's law states that the volume of a gas is directly proportional to the number of moles of the gas, while pressure and temperature are kept constant (V/n constant).

Explanation:

Charles's law says that at constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. This is because "temperature" means movement of the particles. So, the greater the movement of the particles (temperature), the greater the volume of the gas. Then, Charles's law indicates that the volume is directly proportional to the temperature of the gas.

So, Charles's law states that the volume of a gas is directly proportional to the temperature of the gas, while pressure and number Of moles are kept constant (V/T = constant). All temperatures must be in kelvins when used in gas law calculations.

As the volume increases, the gas particles (atoms or molecules) take longer to reach the walls of the container and therefore collide with them fewer times per unit of time. This means that the pressure will be lower because it represents the frequency of collisions of the gas against the walls. In this way pressure and volume are related, determining Boyle's law which says:

"The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure"

So, Boyle's law states that the volume of the gas varies inversely to the pressure on the gas, while temperature and number of moles are kept constant (PV = constant).

Avogadro's Law is a gas law that relates the volume and quantity of gas at constant pressure and temperatures. This law states that the volume of a gas held at constant temperature and pressure is directly proportional to the number of moles of the gas: if the amount of gas increases, the volume will increase, and if the amount of gas decreases, the volume decreases.

Then, Avogadro's law states that the volume of a gas is directly proportional to the number of moles of the gas, while pressure and temperature are kept constant (V/n constant).

Answer:

Boyle's Law: This gas relates pressure and volume at a fixed Temperature.

Charles' Law: This gas law relates the volume of a given mass and its temperature at a fixed pressure.

Avogadro's Law: This gas law relates the volume occupied by an ideal gas and the number of moles present at a fixed temperature and pressure.Avogadro's Law

Ideal Gas Law: This law states that the volume of any gas is directly proportional to the number of moles of the gas and the temperature of the gas and is inversely proportional to the pressure of the gas.

Answer: 9.18 Litres

Standard Temperature and Pressure (STP). Think of this as the perfect environment where the Temp. is 0°C or 273 Kelvin and Pressure is always 1 atm. This is only true in STP.

This question uses the Ideal Gas Equation:

PV=nRT

P= 1 atm

V = ??

T = 273 K (always convert to Kelvin unless told otherwise)

n = 0.410 mol

R = 0.0821 L.atm/mol.K

What R constant to use depends on the units of the other values. (look at the attachments) The units cancel out and only Litres is left. You simply multiply the values.

Answer:

9.18 liters .............

heya