The false statement concerning amino groups are nonpolar.
What is meant by amino groups?Nitrogen and hydrogen are the two components that make up an amino group. The chemical composition of an amino group is NH2. A single covalent link holds the N-H atoms in this functional group together.
Amines are substances and functional groups in chemistry that have a nitrogen atom that is basic and has a lone pair. Amines are technically ammonia derivatives in which one or more hydrogen atoms have been swapped out for a substituent, like an alkyl or aryl group.
A specific kind of functional group called an amino group is made up of one nitrogen and two hydrogens that are joined by a single covalent link. The chemical structure of the amino group is NH2.
Therefore, the correct answer is option D) They are nonpolar.
The complete question is;
Which of the following is a false statement concerning amino groups?
A) They are basic in pH.
B) They are found in amino acids.
C) They contain nitrogen.
D) They are nonpolar.
E) They are components of urea.
To learn more about amino groups refer to:
https://brainly.com/question/1302816
#SPJ4
Electrophilic nitration of benzoic acid gives almost exclusively 1,3-nitrobenzoic acid. By drawing the appropriate resonance forms of the intermediate cations resulting from attack of [NO2]+, explain this result.
The electrophilic nitration of benzoic acid involves the attack of the nitronium ion ([NO2]+) on the benzene ring of the benzoic acid. The intermediate formed is a positively charged arenium ion, which can resonate between different resonance forms.
One of the resonance forms of the intermediate cation is shown below:
O O
// //
/C+ <-----> /C
\ \
\ O-
In this resonance form, the positive charge is delocalized over the carbon atom and the adjacent oxygen atom. The resulting resonance hybrid is stabilized by the delocalization of the positive charge over the ring, which lowers the overall energy of the system.
The nitronium ion can attack at the meta position, which leads to the formation of 1,3-nitrobenzoic acid. The attack at the ortho or para positions would lead to the formation of other isomeric products.
The reason for the selective formation of 1,3-nitrobenzoic acid is due to the resonance stabilization of the intermediate cation. The meta position is less hindered than the ortho and para positions, and the resonance form shown above places the positive charge at the meta position. Therefore, the attack of the nitronium ion at the meta position is favored over the other positions. Additionally, the resonance form shown above places the negative charge of the carboxylate group at the para position, which makes it less favorable for the nitronium ion to attack at this position.
Overall, the resonance stabilization of the intermediate cation favors the selective formation of 1,3-nitrobenzoic acid in the electrophilic nitration of benzoic acid.
For more questions on electrophillic nitration-
brainly.com/question/14803468
#SPJ4
Why is it dangerous to clean a well that remained closed for a long time?
Answer:
When someone spends a long period in a closed well, their ability to breathe becomes more difficult due to the high concentration of carbon dioxide that has accumulated, which could result in death.
can I please get the five points :)
Classify each of the following substances as an element, a compound, or a mixture.
Silver, Ag and fluorine, F, carbon monoxide, CO and calcium chloride, Ca Cl2, soft drink
Drag the appropriate items to their respective bins.
A mixture is a physical combination of two or more compounds that retain their identities.
What is mixture?A mixture in chemistry is a substance composed of two or more chemical components which are not chemically connected. A mixture is a physical combination of two or more compounds that retain their identities and therefore are mixed as solutions, suspensions, as well as colloids.
Silver element
Ag and fluorine mixture
F element
carbon monoxide compound
CO and calcium chloride mixture
CaCl[tex]_2[/tex] compound
soft drink mixture
Therefore, a mixture is a physical combination of two or more compounds that retain their identities.
To learn more about mixture, here:
https://brainly.com/question/12160179
#SPJ1
epoxides undergo a ring-opening reaction when attacked by strong nucleophiles. select all statements that correctly describe the regiochemistry and stereochemistry of this process.
Epoxides undergo a ring-opening reaction when attacked by strong nucleophiles, optically inactive starting material gives optically inactive products, this is an SN2 reaction. Option A and B are correct choices.
A) This statement is true. Epoxide ring opening by a strong nucleophile does not involve any chiral center, will give an optically inactive product.
B) This statement is also true. Epoxide ring opening by a strong nucleophile is typically an SN2 reaction, in which the nucleophile attacks the electrophilic carbon of the epoxide from the backside, leading to inversion of configuration at the attacked carbon.
C) This statement is not generally true. The Regio chemistry of epoxide ring opening by a strong nucleophile depends on the nature of the nucleophile, the identity of the substituents on the epoxide, and the reaction conditions.
To know more about the epoxide, here
brainly.com/question/7213902
#SPJ4
--The complete question is, Epoxides undergo a ring-opening reaction when attacked by strong nucleophiles. Select all that describe stereo/regiochemistry of this process.
A) optically inactive starting material gives optically inactive products
B) this is an SN2 reaction
C) for an unsymmetrical epoxide, the nucleophile attacks the less substituted C atom--
in the bronsted Lowry definition of acids and the base, an acid and
A) is a proton donor B breaks stable hydrogen bonds C) corrodes metals D) form is stable hydrogen bonds
Answer: A (acid is a proton donor)
Explanation:
Bronsted-Lowry Definition
Acids are proton (H⁺) donors.Example: HCl is a strong acid and it donates a proton to water when both are in a solution. Water is the base because it accepted the proton from water to form H₃O⁺.Bases are proton (H+) acceptors.Example: NH₃(aq) + H₂O(l) <--> NH₄⁺(aq) + OH⁻(aq). In this reaction, NH₃ is the base because it accepted the proton from water, and water is the acid because it donated a proton to NH₃.· Amphoteric means some substances act as an acid or base, depending on the reaction. Water is a good example of an amphoteric substance because it can donate or accept a proton.consider a reaction in which 1.00 mole of so2(g) and 1.00 mole of o2(g) are added to a 1.00l container at 1000k and allowed to react until the equilibrium below is achieved. At equilibrium, the container has 0.919 moles of SO3 (g). What is the value of Kp?
2SO2 (g) + O2 (g) → 2SO3 (g)
The value of Kp for the given reaction is 100.4
The equilibrium constant expression (Kp) for the given reaction is:
Kp = (P_SO₃)² / (P_SO₂)² × (P_O₂)
where P is the partial pressure of the gas in atm.
We can use the given information to calculate the partial pressures of each gas at equilibrium.
The initial pressure of each gas is 1.00 atm (since each mole of gas occupies the same volume, and the total volume is 1.00 L).
At equilibrium, each mole of SO₂ that reacts produces 1 mole of SO₃. Therefore, the partial pressure of SO₃ at equilibrium is:
P_SO₃ = 0.919 mol / 1.00 L = 0.919 atm
Since two moles of SO₂ react for every one mole of O₂, the partial pressure of SO₂ at equilibrium is:
P_SO₂ = (1.00 mol - 0.919 mol) / 1.00 L = 0.081 atm
Partial pressure of O2 at equilibrium is:
P_O₂ = (1.00 mol - 0.919 mol) / 1.00 L = 0.081 atm
Now we can substitute these values into the equilibrium constant expression:
Kp = (0.919)² / (0.081)² × (0.081) = 100.4
Therefore, the value of Kp for the given reaction is 100.4 (with no units, since the units cancel out).
To know more about Kp here
https://brainly.com/question/30550192
#SPJ4
A small amount of sodium chloride (NaCI) is dissolved in a large amount of water. Imagine separating this process into the four stages sketched below (These sketches show only a portion of the substances, so you can see the density and distribution of atoms and molecules in them.) NaCl H,O solution Use these sketches to answer the questions in the table below The enthalpy of solution AH NaCl dissolves in water. Use this information to list the stages in order of increasing enthalpy is positive when soln absorbed released neither absorbed nor released Would heat be absorbed or released if the system moved from Stage C to D? none ionic bonding force covalent bonding force metal bonding force hydrogen-bonding force dipole force ion-dipole force dispersion force What force would oppose or favor the system moving from Stage C to D?
Bond energy is described as a measure of the bond strength of a chemical bond, and it is the amount of energy required for breaking the atoms involved in a molecular bond into free atoms. The answers for multiple questions are given below.
i)
When bond is formed energy is released and to break a bond energy must be applied.
∆Hsoln is positive , so A < D
Comparing D to B and C , molecules are dissociated in B and molecules are more dissociated in C , so ∆H is order is D < B < C
Therefore, increasing order of enthalpy is A < D < B < C
ii)
Comparing to stage C to D molecules are associated , so heat is released.
Learn more about bond energy from the link given below.
https://brainly.com/question/26141360
#SPJ4
consider the theoretical reaction below: 2d(g) 3e(g) f(g) <----> 2g(g) h(g) if e is decreasing at a rate of 0.531 atm/s, what rate (atm/s) is g increasing? report your answer as a plain numeral (no /- signs needed) and use 3 sig figs for your answer.
The negative sign indicates that gas G is actually decreasing, but the magnitude of the rate of change is given as 0.354 atm/s (to three significant figures).
What is magnitude?
The term magnitude refers to the size or amount of a quantity, without regard to its direction or sign. Magnitude is often represented as a scalar value, which means that it only has a magnitude and no associated direction.
To determine the rate at which gas G is increasing, we need to use the stoichiometry of the reaction and the given rate of change of gas E to calculate the rate of change of gas G. From the balanced chemical equation, we can see that 3 moles of gas E are consumed for every 2 moles of gas G that are produced:
2d(g) + 3e(g) + f(g) ↔ 2g(g) + h(g)
Thus, the rate at which gas G is increasing is related to the rate at which gas E is decreasing by the ratio of their stoichiometric coefficients:
(rate of change of gas G) = (2/3) x (rate of change of gas E)
Plugging in the given rate of change of gas E, we get:
(rate of change of gas G) = (2/3) x (-0.531 atm/s) = -0.354 atm/s
The negative sign indicates that gas G is actually decreasing, but the magnitude of the rate of change is given as 0.354 atm/s (to three significant figures).
To learn more about magnitude:
https://brainly.com/question/24468862
#SPJ4
Tell what you should do to prepare for equip calibration
-Check that all nozzles are the same and of the desired flow rate and pattern -clean all nozzle and screens -add clean water to the spray tank and adjust the pressure to the desired level while the pump is operating at normal speed. make sure water is flowing through the nozzles -Check the spray patterns from each nozzle -With the sprayer stationary and operating at the desired pressure, hold a measuring cup marked in fluid ounces directly under each nozzle for 1 min. -calculate the average output (flow rate) by dividing the total amount collected by the number of nozzles. -replace any nozzle whole flow rate is 5% greater or less than the average.
The equipment can be properly calibrated to ensure that the spray application rate is consistent and accurate, which is important for achieving the desired level of control while minimizing waste and avoiding off-target effects.
To prepare for equipment calibration, the following steps should be taken:
Check that all nozzles are the same and of the desired flow rate and pattern. Clean all nozzle and screens. Add clean water to the spray tank and adjust the pressure to the desired level while the pump is operating at normal speed. Make sure water is flowing through the nozzles.
Check the spray patterns from each nozzle. With the sprayer stationary and operating at the desired pressure, hold a measuring cup marked in fluid ounces directly under each nozzle for 1 min.
Calculate the average output (flow rate) by dividing the total amount collected by the number of nozzles. Replace any nozzle whose flow rate is 5% greater or less than the average.
To learn more about Calibration :
https://brainly.com/question/8137688
#SPJ4
click and drag on elements in order arrange the necessary steps in order for finding the molecular formula of an unknown compound from mass percent data. place the first step at the top of the list.
To find the molecular formula of an unknown compound from mass percent data, a series of steps must be taken in the correct order. These steps are as follows:
Convert mass percent to grams: The first step is to convert the mass percent of each element in the compound to grams. This can be done by assuming that there is 100 g of the compound and using the mass percent to calculate the mass of each element in grams.
Convert grams to moles: Next, the mass of each element in grams is converted to moles using the molar mass of the element. The molar mass is found on the periodic table and is the mass of one mole of the element in grams.
Determine the empirical formula: The empirical formula is the simplest whole number ratio of atoms in a compound. To find the empirical formula, divide the number of moles of each element by the smallest number of moles. If the resulting numbers are not whole numbers, multiply all the numbers by the smallest whole number that will make them all whole numbers.
Determine the molecular formula: The molecular formula is the actual number of atoms of each element in a molecule. To find the molecular formula, divide the molecular weight of the compound by the empirical formula weight. This will give the number of empirical formula units in the molecular formula. Then, multiply the subscripts of the empirical formula by this number to get the molecular formula.
In summary, the necessary steps for finding the molecular formula of an unknown compound from mass percent data are: converting mass percent to grams, converting grams to moles, determining the empirical formula, and determining the molecular formula. These steps should be carried out in the order listed for an accurate and efficient determination of the molecular formula.
To know more about molecular: https://brainly.com/question/14614762
#SPJ4
which of the following choices describe the steps required to determine the empirical formula of a compound from the mass percent? select all that apply. multiple select question. the ratio of atoms of each element must be a ratio of integer numbers. if the sample contains 52 g of carbon, it is assumed that this compound has 52 mass percent of carbon. if a compound contains 52% of mass of c, it can be assumed that there are 52 g of c in 100 g of the compound. the mass percentage of each element is converted to moles using the mass formula massmolarmass . the mass percentages are divided among the smallest number to calculate the ratio of atoms of each element present.
If carbon makes up 52 g of a compound's mass, then there are 100 g of the compound and 52 g of carbon.
What is meant by mass percentage?The percentage of a solution's mass that is made up of solutes is known as the mass percent. This percentage is measured in relation to the total mass of the solution.
A concentration or a component in a certain mixture can be expressed as mass percent. The mass percentage that indicates the mass of solute contained in a given mass of solution can be used to characterize the composition of the solution. In terms of mass or moles, the solute's concentration is expressed.
Each element must have an equal amount of atoms, which must be an integer ratio. If carbon makes up 52 g of a compound's mass, then there are 100 g of the compound and 52 g of carbon.
The mass percentage of each element is converted to moles using the mass formula mass / molar mass
To learn more about mass percent refer to:
https://brainly.com/question/26150306
#SPJ4
To control the solids-contact clarification process, the operator must maintain the correct dissolved oxygen volume in the reaction zone by exercising control of the rate of recirculation.
True or False
False. According to the statement, the rate of recirculation can be adjusted to control the amount of dissolved oxygen present during the solids-contact clarifying process. Recirculation rate can play a significant role in process control, but it is not the only one.
What is the rate of recirculation?The rate of recirculation refers to the percentage of a fluid's flow that is redirected back into a system for further processing or reuse, rather than being discharged or wasted. The rate of recirculation can vary depending on the specific system and process involved, but it is often used in industrial settings to improve efficiency and reduce waste. A high rate of recirculation can result in significant cost savings and environmental benefits.
Hence, the answer is False. The statement appears to be about controlling the dissolved oxygen volume in the solids-contact clarification process by controlling the rate of recirculation.
To learn more about the rate of recirculation, follow the link:
brainly.com/question/3373319
#SPJ4
imagine that your peer successfully synthesized fluorescein, then transfers an appropriate amount of it to a vial. however, instead of using 0.1 m naoh aq, your peer uses 0.1 m hcl(aq).
If your colleague accidentally uses 0.1 M HCl(aq) to dilute fluorescein instead of 0.1 M NaOH(aq), the solution will become acidic rather than basic.
Fluorescein is a pH-sensitive molecule that changes structurally in acidic conditions, resulting in a substantial decrease in fluorescence intensity. Fluorescein exists in a deprotonated form in basic conditions, which is accountable for its bright green fluorescence.
In acidic conditions, however, the molecule protonates, causing a structural change that changes its electronic properties and results in a drop in fluorescence intensity.
As a result, if fluorescein is dissolved in 0.1 M HCl(aq), the solution becomes acidic, and the fluorescence intensity decreases considerably. This would have a significant impact on fluorescein's properties, especially its fluorescence.
Learn more about Fluorescein
https://brainly.com/question/13264839
#SPJ4
1st attempt d See Periodic Table The first eight ionization energies of a third row element are 1012, 1907,2914,4964,6274, 21267, 25431, and 29872 kJ/mol. Identify the element. Choose one: A. Na OB, P ○C.Cl ○ D. Mg O E. A OF.S OG. S O H. Ar
The element is aluminum (Al), which is in the third period of the periodic table and has the electron configuration [Ne]3s²3p¹.
The element can be identified by analyzing the ionization energies. The third row of the periodic table contains elements with the electron configuration [Ar] 3d¹⁰4s²4p¹. Based on the given ionization energies, we can identify the element by finding the period that contains the first eight ionization energies listed.
Looking at the given ionization energies, we can see that the first ionization energy is relatively low, indicating that the element is a metal. The next seven ionization energies increase gradually, indicating that they correspond to removing electrons from successive energy levels.
To know more about electron configuration here
https://brainly.com/question/27856323
#SPJ4
PLS SOMONE HELP I KNOW THE PHOTO ISNT THAT GOOD BUT I REALLY NEED HELP I WILL MARK AS BRAINLIEST AND GIVE 5 STARS ASWELL AS A HEART PLSS
Answer:
1 mol CO2
Explanation:
3 mol CH4 * [tex]\frac{1 mol CO2}{1 Mol CH4}[/tex] = 3 mol of CO2
2 mol O2 * [tex]\frac{1 mol CO2}{2 mol O2}[/tex] = 1 mol CO2
In the balanced equation, for every 1 mol of CH4, there is 1 mol of CO2We put 1 mol CH4 on the bottom so the units may cross out and give you the answer in "mol CO2"The reason I say 1 mol is because with two moles of Oxygen, you can only make 1 mole of Carbon dioxide.For Example: You make steak dinners and each plate has to have 1 steak and 2 potatoes. You have 3 steaks (CH4) but only 2 potatoes (O2). With only the steak you could make three dinners, but you are limited to only be able to make one plate (Mole of CO2) because you only have 2 potatoes.
Combining 0.286 mol Fe2O3 with excess carbon produced 19.6 g Fe.
Fe2O3+3C⟶2Fe+3CO
What is the actual yield of iron in moles?
actual yield:
0.351
mol
What is the theoretical yield of iron in moles?
theoretical yield:
mol
What is the percent yield?
percent yield:
Therefore, the actual yield of iron in moles is 0.351 mol, the theoretical yield of iron in moles is 0.572 mol, and the percent yield is 61.31%.
What is moles?In chemistry, a mole (mol) is a unit of measurement used to express the amount of a substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of pure carbon-12. Moles are used to convert between the mass of a substance and the number of entities it contains, as well as to calculate the stoichiometry of chemical reactions. For example, the mass of a substance can be converted to moles by dividing the mass by its molar mass (the mass of one mole of the substance), which allows for the comparison of different substances on a per-mole basis. Similarly, the number of entities in a substance can be converted to moles by dividing the number by Avogadro's number.
Here,
To determine the theoretical yield of iron in moles, we first need to use the balanced chemical equation to calculate the moles of Fe produced from 0.286 mol of Fe2O3:
1 mol Fe2O3 produces 2 mol Fe (from the balanced equation)
Therefore, 0.286 mol Fe2O3 produces (2/1) x 0.286 mol Fe = 0.572 mol Fe (theoretical yield)
The actual yield of Fe is given as 19.6 g, so we need to convert this to moles using the molar mass of Fe:
molar mass of Fe = 55.845 g/mol
moles of Fe = 19.6 g / 55.845 g/mol = 0.351 mol (actual yield)
The percent yield is calculated by dividing the actual yield by the theoretical yield and multiplying by 100:
percent yield = (actual yield / theoretical yield) x 100%
percent yield = (0.351 mol / 0.572 mol) x 100% = 61.31%
To know more about moles,
https://brainly.com/question/30373566
#SPJ1
a pictorial representation of an electronic configuration is shown. an electron configuration has an up and a down arrow in 1 s, an up and a down arrrow in 2 s, an up and a down arrow in each of three 2 p orbitals, an up and a down arrow in 3 s, and an up arrow in the first and second of three 3 p orbitals. give the full electron configuration. do not use the noble gas abbreviation. Please also give element name.
The full electron configuration for this element is: [tex]1s^{2}[/tex][tex]2s^{2} 2p^{3s} 3p^{2}[/tex] ,this corresponds to the element aluminum (Al).
An electronic configuration is a description of how electrons are distributed among the energy levels and sublevels of an atom or ion. It indicates the number of electrons in each sublevel of an atom, starting with the lowest energy level (1s) and moving up in energy through each subsequent level and sublevel.
For example, the electronic configuration of hydrogen is 1s^1, indicating that there is one electron in the 1s sublevel of the first energy level. The electronic configuration of oxygen is 1s^2 2s^2 2p^4, indicating that there are two electrons in the 1s sublevel, two electrons in the 2s sublevel, and four electrons in the 2p sublevel of the second energy level.
To know more about electron configuration here
https://brainly.com/question/27856323
#SPJ4
The items listed below relate to the method used for solving problems in chemistry. Match each pair of items correctly.1. The known quantities in the problem...2. The unknown quantity...3. The units of conversion factors..4. Any units that do not cancel....1... often provide useful conversion factors.2... will be the solution to the problem.3... must cancel at each step, except for the units needed for the answer.4... are the units for the unknown quantity.
The correct matching is of pair of items is :
Known quantities in the problem --> Often provide useful conversion factors
Unknown quantity --> Will be the solution to the problem
Units of conversion factors --> Must cancel at each step, except for the units needed for the answer
Any units that do not cancel --> Are the units for the unknown quantity
1)The known quantities in the problem often provide useful conversion factors.
2)The unknown quantity will be the solution to the problem.
3)The units of conversion factors must cancel at each step, except for the units needed for the answer.
4)Any units that do not cancel are the units for the unknown quantity.
To know more about conversion factors here
https://brainly.com/question/24597793
#SPJ4
Which number has
5 significant
figures?
A. 36,200
B. 36,238
C. 36,240
D. 40,000
Answer:
The correct Answer IS B
Explanation:
Since B has 5 figures, and all the number are other than zero
Hope i Helped
Answer: I believe the answer is B). 36,238 due to having 5 Different place values all different than zero
What is the IUPAC name for CH3CH(OH)CH(CH3)CH(CH3)2 ?
The IUPAC name of the following structural formula CH3CH OH−CH3 is propan-2-ol.
What is the structural formula?
The molecular structure of a chemical compound is graphically represented by the structural formula of the complex, which demonstrates how the atoms may be arranged in three-dimensional space. Structural formulas offer a more comprehensive geometric depiction of the molecular structure than other forms ofof chemical formulas, which have fewer symbols and less descriptive power. For instance, many chemical compounds exist in many isomeric forms that have the same molecular formula but different enantiomeric structures..To know more about structural formula, click the link given below:
https://brainly.com/question/14611418
#SPJ1
How does a reverse osmosis water purification system operate? (1 point) 1. Untreated water is subjected to low pressure, causing it to move through a highly permeable membrane, which captures contaminants. 2. Untreated water is subjected to high pressure, causing it to move through a highly permeable membrane, which captures contaminants. 3. Untreated water is subjected to low pressure, causing it to move through a semi-permeable membrane, which captures contaminants. 4. Untreated water is subjected to high pressure, causing it to move through a semi-permeable membrane, which captures contaminants,
as discussed in class, an important buffer for intracellular fluids (and thus a common buffer in the laboratory to mimic physiological conditions) is the phosphate system. despite being a polyprotic acid, the equilibrium of dihydrogen phosphate (h2po4-) and hydrogen phosphate (hpo42-) is the most useful due to its pka of 7.2. 6.2 - 8.2 in what ph range can this system be used as an effective buffer? 7.34 what is the ph of a mixture of 0.042m h2po4- and 0.058 m hpo42-? if 1.0 ml of 10.0 m naoh is added to 1.0 l of the buffer prepared above, what is the final ph? if 1.0 ml of 10.0 m naoh is added to 1.0l pure water at ph 7.0, what is the final ph? how does this compare to the change observed in the buffered
The phosphate system can be used as an effective buffer in the pH range of 6.2-8.2, which includes the pKa of 7.2 for the equilibrium of dihydrogen phosphate and hydrogen phosphate.
To calculate the pH of the given mixture of 0.042 M H2PO4- and 0.058 M HPO42-, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([HPO42-]/[H2PO4-])
pH = 7.2 + log(0.058/0.042)
pH = 7.34
Therefore, the pH of the mixture is 7.34.
When 1.0 mL of 10.0 M NaOH is added to 1.0 L of the buffer prepared above, we can use the equation for the reaction between NaOH and H2PO4-: NaOH + H2PO4- → NaHPO4 + H2O
The initial moles of H2PO4- in 1.0 L of the buffer are:
moles H2PO4- = 0.042 M × 1.0 L = 0.042 mol
Adding 1.0 mL of 10.0 M NaOH adds 0.01 mol of NaOH to the buffer solution. Assuming that all of the added NaOH reacts with H2PO4-, the final moles of H2PO4- and HPO42- can be calculated as follows:
moles H2PO4- = 0.042 mol - 0.01 mol = 0.032 mol
moles HPO42- = 0.058 mol + 0.01 mol = 0.068 mol
Using the Henderson-Hasselbalch equation with the new concentrations of H2PO4- and HPO42-, we can calculate the final pH: pH = pKa + log([HPO42-]/[H2PO4-])
pH = 7.2 + log(0.068/0.032)
pH = 7.76
Therefore, the final pH of the buffer after the addition of NaOH is 7.76.
When 1.0 mL of 10.0 M NaOH is added to 1.0 L of pure water at pH 7.0, we can use the equation for the reaction between NaOH and water:
NaOH + H2O → Na+ + OH- + H2O
The initial concentration of OH- can be calculated from the concentration of NaOH: [OH-] = 10.0 M × 1.0 mL / 1000 mL = 0.01 M
The initial concentration of H+ in the water is:
[H+] = 10^-7.0 = 1.0 × 10^-7 M
Assuming that all of the added NaOH dissociates completely, the final concentration of OH- can be calculated as:
[OH-] = 0.01 M + 10.0 M × 1.0 mL / 1000 mL = 0.100 M
The final concentration of H+ can be calculated from the equation for the ion product of water:
[H+][OH-] = 1.0 × 10^-14
[H+] = 1.0 × 10^-14 / 0.100 M = 1.0 × 10^-13 M
Therefore, the final pH of the water after adding NaOH is 13.0.
To learn more about Henderson-Hasselbalch, visit here
https://brainly.com/question/13423434
#SPJ4
explain the relationship between no2 concentration and ozone concentration represented in this graph.
The relationship between NO2 and O3 concentrations is not straightforward and depends on a variety of factors. It is important to monitor both pollutants and take steps to reduce emissions of both NO2 and VOCs in order to improve air quality and reduce the risk of adverse health effects.
What is the relationship between NO2 concentration and ozone concentration?Since the question is incomplete and the graph that ought to be shown is missing, I will look at the relationship between NO2 concentration and ozone concentration in general.
The relationship between nitrogen dioxide (NO2) and ozone (O3) concentrations is complex and depends on a variety of factors such as sunlight, temperature, and the presence of other pollutants.
In general, high levels of NO2 can contribute to the formation of O3 through a complex series of chemical reactions involving other pollutants such as volatile organic compounds (VOCs). This process, known as photochemical smog formation, typically occurs during warm, sunny weather and can lead to elevated levels of O3 in urban and suburban areas.
Learn more about concentration:https://brainly.com/question/10725862
#SPJ1
Which substance can dissolve only (is saturated at) 40 g in 60°C water?
a
KClO3
b
NaCl
c
KCl
(30 points)
KCl would be the substance can dissolve only (is saturated at) 40 g in 60°C water
Option C is correct.
What is a supersaturated solution?A supersaturated solution is described as a solution that contains more than the average solvent that can be dissolved at a given temperature
At 60ºC, the solubility of KCl is about 42g/100mL of water. Therefore, since we have 40g of KCl that were dissolved in less than 100mL of water, the solution would be supersaturated.
In conclusion, supersaturation occurs with a solution when the concentration of a solute exceeds the concentration specified by the value of solubility at equilibrium.
Learn more about a supersaturated solution at: brainly.com/question/17592745
#SPJ1
Determine the empirical formula of a compound that contains 69.5% oxygen and 30.5% nitrogen, and then determine the molecular formula. The molar mass of the molecular formula is 138.06g/mol.
Answer:
NO2
Explanation:
the molar mass of oxygen = 138.06 x 0.695 = 95.9517
=> 95.9517/16 = 6
the molar mass of nitrogen = 138.06 x 0.305 = 42.1083
=> 42.1083 / 14 = 3
So there are 3 N and 6 O => N3O6 which is simplified empirically as NO2
calculate the ph, poh, and percentage protonation of solute in each of the following aqueous solutions: (a) (b) (c) (d) 0.0073 m codeine, given that the of its conjugate acid is 8.21
A) pH = 9.44, pOH = 4.56, Percentage protonation = [codeine-H+] / [codeine-H+] + [codeine] = 0.72%
B)pH = pKa + log([codeine]/[codeine-H+]) = 10.09, pOH = 3.91, Percentage protonation = [codeine-H+] / [codeine-H+] + [codeine] = 0.17%
C)pH = 8.21, pOH = 5.79, Percentage protonation = [codeine-H+] / [codeine-H+] + [codeine] = 0.01%
The pKa value given is for the conjugate acid of codeine which is codeine-H+. We can use the pKa value to determine the Ka value for codeine-H+ and then use the Ka value to determine the concentrations of codeine-H+ and codeine in solution.
(a) For 0.0073 M codeine in water, we can assume that the concentration of codeine-H+ is very small and can be neglected. The Ka value can be determined from the pKa as follows:
pKa = -log(Ka)
8.21 = -log(Ka)
Ka = 7.94 x 10^-9
To determine the concentration of codeine-H+, we can use the equation for the dissociation of codeine-H+:
Ka = [H+][codeine-]/[codeine-H+]
Let x be the concentration of codeine-H+ that dissociates. Then:
7.94 x 10^-9 = x^2 / (0.0073 - x)
Solving for x gives x = 5.29 x 10^-5 M
Therefore, the concentration of codeine-H+ is 5.29 x 10^-5 M and the concentration of codeine is 0.0073 M. Since codeine is a weak base, we can assume that it does not significantly affect the pH of the solution.
(b) Since the concentration of codeine is greater than the concentration of codeine-H+, we can assume that the pH will be determined by the concentration of codeine-H+.
Let x be the concentration of codeine-H+. Then:
Ka = [H+][codeine-]/[codeine-H+]
7.94 x 10^-9 = x^2 / (0.1 - x)
Solving for x gives x = 2.08 x 10^-5 M
(c) Similar to (b), we can assume that the pH will be determined by the concentration of codeine-H+.
Let x be the concentration of codeine-H+. Then:
Ka = [H+][codeine-]/[codeine-H+]
7.94 x 10^-9 = x^2 / (0.01 - x)
Solving for x gives x = 2.21 x 10^-5 M
(d) Similar to (a), we can assume that the concentration of codeine-H+ is very small and can be neglected.
To know more about Percentage protonation here
https://brainly.com/question/24877689
#SPJ4
Are there any mutations that can occur in lymphatic.
Answer:Lymphatic malformations (LM), also known as lymphangiomas, are characterized by the overgrowth of lymphatic vessels during pre- and postnatal development.
Which of the following pure liquids is the best solvent for carbon disulfide ? HBr(l) CH_3OH(l) C_6H_6(l) H_20(l) NH_3(l)
The pure liquid that is the best solvent for carbon disulfide is C₆H₆, also known as benzene. Option C is correct.
The best solvent for carbon disulfide (CS₂) would be a liquid that has a similar polarity and intermolecular forces to CS₂. Carbon disulfide is a nonpolar molecule, which means that it is most likely to dissolve in a nonpolar solvent.
Benzene is a nonpolar molecule and has a similar structure and intermolecular forces to CS₂, which makes it a good solvent for nonpolar solutes such as carbon disulfide.
In contrast, the other options (HBr, CH₃OH, H₂O, and NH₃) are polar molecules, which means that they are unlikely to dissolve nonpolar solutes such as CS₂ as effectively as benzene.
To know more about solvent here
https://brainly.com/question/14797683
#SPJ4
--The given question is incomplete, the complete question is
"Which of the following pure liquids is the best solvent for carbon disulfide ? A) HBr B) CH₃OH C) C₆H₆ D) H₂0 E) NH₃"--
the oxyanion hole stabilizes the tetrahedral intermediate through which of the following mechanisms?
Through electrostatic interactions, the oxyanion hole maintains the tetrahedral intermediate. The oxyanion hole is a location in an enzyme's active site that stabilises the reaction's intermediate during enzymatic processes.
An attribute of enzymes that catalyse processes involving the production of tetrahedral intermediates is the oxyanion hole. It is distinguished by a collection of hydrogen-bonding amino acid residues that are positioned to stabilise the intermediate's developing negative charge on the oxygen atom. The breakdown of the link between the substrate and the leaving group is what causes this negative charge. The tetrahedral intermediate can be stabilised locally in the oxyanion hole, lowering the energy barrier for the reaction and accelerating the entire process. Many enzymes, including serine proteases, lipases, and many more, share the oxyanion hole.
Learn more about oxyanion hole here:
https://brainly.com/question/8837281
#SPJ4
using the bsa working solutions created above, how much and which concentration would you pipet into three different centrifuge tubes so you end up with 20 ug, 2 ug, and 0.2 ug of bsa? (note: remember to stay within the accurate range of your pipetman.)
The concentration on which we should pipette out are 4μl.
To recap, the working solutions are 20μg/μl, 2μg/μl, and 0.2μg/μl.
1.
It’s basically the same as the other question. Set it up algebraically:
50μg/μl x = 200 μg
Note the variable x in the equation. You can see easily that x = 4μl (remember to include the units, and recall that units cancel in equations).
So if you pipet 4μl of the 50μg/μl working solution into a centrifuge tube, you’ll have 20μg of BSA in there.
2.
Again, set it up algebraically:
5μg/μl x = 20 μg
Here, x = 4μl again. So again you are pipetting out 4μl, except this time it’s from the 5μg/μl working solution.
3.
I’m sure you can see that there’s a trend going on here (it’s not any special science trend or anything like that, though).
Learn more about concentrations from the link given below.
https://brainly.com/question/10725862
#SPJ4