which of the following in aqueous solution is a weak electrolyte? h2co3(aq) nh4cl(aq) lioh(aq) all of the above none of the above

Concentrated sodium hydroxide (NaOH) must be treated with caution because it is a highly corrosive and caustic substance. Proper protective equipment includes chemical-resistant gloves and safety goggles.

Handling concentrated sodium hydroxide requires strict safety measures due to its potential to cause severe burns and damage to the skin, eyes, and respiratory system. In addition to chemical-resistant gloves and safety goggles, other protective equipment such as a lab coat, closed-toe shoes, and even a face shield can be used to minimize the risk of exposure. In case of accidental contact, it is crucial to have an eyewash station and safety shower nearby to quickly rinse off any NaOH that comes into contact with the skin or eyes.

Furthermore, it is essential to work in a well-ventilated area to prevent the inhalation of harmful fumes, and proper storage guidelines must be followed. Sodium hydroxide should be stored in a tightly sealed, labeled container, away from any acidic or flammable materials. Lastly, it is important to be knowledgeable about emergency procedures and first-aid measures to handle any potential accidents or incidents involving concentrated NaOH.

Know more about Concentrated sodium hydroxide here:

https://brainly.com/question/28612681

#SPJ11

The solute is the substance being dissolved in a solution, the solvent is the medium in the solute is dissolved. The "universal" solvent refers to water, as it has the ability to dissolve a wide range of substances.

Not all solutions are solids dissolved in liquids. Other examples of solutions include gas dissolved in a liquid (e.g., carbonated drinks) and liquid dissolved in a liquid (e.g., ethanol dissolved in water). It is easiest to separate the component substances in a heterogeneous mixture because the different components can be physically separated based on their different properties, such as size, density, or solubility.

The three different types of mixtures are solutions, colloids, and suspensions. A solution is a homogeneous mixture where solute particles are dispersed and evenly distributed in a solvent. A colloid is a heterogeneous mixture where particles are dispersed but not dissolved in the medium. A suspension is a heterogeneous mixture where particles are larger and settle out upon standing.

Classification:

a. Salad - Heterogeneous mixture

b. Tap water - Homogeneous mixture

c. Muddy water - Heterogeneous mixture

Learn more about wide range of substances here

https://brainly.com/question/31798424

#SPJ11

5.91 mL of 0.550 M HI(aq) are needed to react with 15.00 mL of 0.217 M KOH(aq).

The balanced chemical equation for the reaction between HI(aq) and KOH(aq) is: HI(aq) + KOH(aq) → KI(aq) + H₂O(l) According to the equation, the stoichiometry of the reaction is 1:1 between HI and KOH.

This means that 1 mole of HI reacts with 1 mole of KOH. To determine how many milliliters of 0.550 M HI(aq) are needed to react with 15.00 mL of 0.217 M KOH(aq), we need to use the equation: M₁V₁ = M₂V₂

where M₁ and V₁ are the concentration and volume of the HI(aq) solution, and M₂ and V₂ are the concentration and volume of the KOH(aq) solution, respectively. Rearranging the equation to solve for V₁, we get: V₁ = (M₂V₂)/M₁

Substituting the given values, we get:

V₁ = (0.217 mol/L × 0.01500 L)/0.550 mol/L.

V₁ ≈ 0.00591 L or 5.91 mL.

To know more about stoichiometry, refer here:

https://brainly.com/question/28780091#

#SPJ11

6.8 moles of nitrogen are required to make 3.4 moles of Ca(NO₂)₂ due to the 2:1 molar ratio of nitrogen to Ca(NO₂)₂.

To determine the number of moles of nitrogen required to make 3.4 moles of Ca(NO₂)₂, we need to first determine the molar ratio of nitrogen to Ca(NO₂)₂.

From the formula of Ca(NO₂)₂, we can see that there are 2 moles of NO₂ for every 1 mole of Ca(NO₂)₂. Since each NO₂ molecule contains one nitrogen atom, there are also 2 moles of nitrogen for every 1 mole of Ca(NO₂)₂.

Therefore, to make 3.4 moles of Ca(NO₂)₂, we would need 2 × 3.4 = 6.8 moles of nitrogen.

To know more about the molar ratio refer here :

https://brainly.com/question/1792057#

#SPJ11

The rate law for the overall reaction is: Rate = k[A][B]².  Option c is correct.

The rate-determining step in this mechanism is the slow step, which involves the collision of A and B to form AB. Therefore, the rate law for this step is Rate = k[A][B]. However, we still need to express the rate of the overall reaction in terms of the concentrations of the reactants. The first step, A₂ → 2A, is fast and does not affect the overall rate law. Thus, we can use the steady-state approximation to express the concentration of A in terms of [A₂] and [AB].

Since A₂ is consumed twice as fast as B in the overall reaction, we can assume that [A₂] = 2[AB]. Substituting this expression into the rate law for the slow step gives Rate = k[2AB][B] = 2k[AB][B] = k[A][B]², which is the rate law for the overall reaction.

C is the correct option.

To know more about rate law here

https://brainly.com/question/30379408

#SPJ4

The complete question is

Given the following proposed mechanism, predict the rate law for the overall reaction.

A2 + 2B ? 2AB (overall reaction)

Mechanism A2 →2A fast A + B ? AB slow

Possible Answers: A. Rate = k[A2][B]

B. Rate = k[A2][B]1/2

C. Rate = k[A][B]

D. Rate = k [A2]1/2[B]

E. Rate = k[A2]

The spectator ions in a neutralization reaction involving this weak acid (HBrO2) and sodium hydroxide (NaOH) is Na+(aq) and BrO2-(aq).

The neutralization reaction between HBrO2 and NaOH can be represented as follows:

HBrO2  +  NaOH   →   NaBrO2   +  H2O

The complete ionic reaction is

H+BrO2-   +   Na+OH-   →   Na+BrO2-   +  H2O

The net ionic reaction is

H+    +   OH-    →       H2O

In this reaction, Na+ and OH- are the ions that combine to form NaOH and they are called the spectator ions because they do not participate in the formation of the products.

Therefore, the answer is option B. Na+(aq) and BrO2-(aq).

To know more about the spectator ions, click below.

https://brainly.com/question/15053039

#SPJ11

In the t-test, the sample standard deviation (s) is used to estimate the population standard deviation (σ) is true, because the population standard deviation is generally unknown and must be estimated from the sample data.

The t-test is a statistical hypothesis test that is used to determine whether there is a significant difference between the means of two groups. It is often used when the sample size is small and the population standard deviation is unknown. The t-statistic is calculated as the difference between the sample means divided by the standard error of the difference, which is calculated using the sample standard deviations and the sample sizes. The t-statistic is compared to a t-distribution with degrees of freedom equal to the sum of the sample sizes minus two, and the p-value is calculated based on the probability of observing a t-value as extreme as the calculated t-value assuming the null hypothesis is true.

Learn more about t-test: https://brainly.com/question/15870238

#SPJ11

In the type of hybridization known as sp³ hybridization, the angle between the hybrid orbitals is 109.5 degrees. In this hybridization, one s orbital and three p orbitals combine to form four equivalent sp³ hybrid orbitals, which are arranged in a tetrahedral geometry around the central atom, resulting in bond angles of approximately 109.5 degrees.

In sp³ hybridization, one s orbital and three p orbitals of the central atom combine to form four hybrid orbitals that are arranged in a tetrahedral shape. In order for an atom to be sp³ hybridized, it must have an s orbital and three p orbital. These hybrid orbitals are used to form bonds with other atoms or groups of atoms. Examples of molecules that exhibit sp³ hybridization include methane (CH₄), ethane (C₂H₆), and ammonia (NH₃).

for more questions on hybridization: https://brainly.com/question/19538722

#SPJ11

Increasing the amount of H3O+ does not directly affect C6H5COO- (the acetate ion).

[tex]H3O+[/tex] is a strong acid and acts as a proton donor in reactions. Acetate ions, on the other hand, are weak bases and can accept protons. However, in a typical scenario, increasing the amount of H3O+ does not directly influence the behavior of C6H5COO-. The reactivity of C6H5COO- is primarily determined by its specific reaction partners and the reaction conditions involved.

It's important to note that changes in the concentration of H3O+ may indirectly affect the overall reaction equilibrium or pH, which can influence the behavior of other species, including C6H5COO-. However, the direct impact of H3O+ on C6H5COO- is limited unless they are involved in a specific reaction where the acetate ion acts as a base.

Learn more about C6H5COO here:

https://brainly.com/question/31973511

#SPJ11

The correct answer to the question is: the process will be spontaneous at any temperature.

ΔG is the amount of energy available to do useful work in a system. It is related to ΔH and ΔS through the equation ΔG = ΔH - TΔS, where T is the temperature in Kelvin.

If ΔG is negative, the process is spontaneous (meaning it will happen on its own without any external energy input), and if ΔG is positive, the process is nonspontaneous (meaning it will not happen on its own without external energy input).

Using the given values of ΔH = -214 kJ/mol and ΔS = 450 J/mol.k, we can calculate ΔG at different temperatures. However, we first need to convert ΔH from kJ/mol to J/mol by multiplying by 1000:

ΔH = -214,000 J/mol

Now we can calculate ΔG at different temperatures using the equation above:

At 298 K (room temperature):

ΔG = -214,000 J/mol - (298 K)(450 J/mol.K) = -349,100 J/mol

Since ΔG is negative, the process is spontaneous at room temperature.

At a high temperature (e.g. 1000 K):

ΔG = -214,000 J/mol - (1000 K)(450 J/mol.K) = 36,000 J/mol

Since ΔG is positive, the process is nonspontaneous at high temperatures.

At a low temperature (e.g. 100 K):

ΔG = -214,000 J/mol - (100 K)(450 J/mol.K) = -229,500 J/mol

Since ΔG is negative, the process is spontaneous at low temperatures.

Therefore, the correct answer to the question is: the process will be spontaneous at any temperature.

To know more about spontaneous, refer

https://brainly.com/question/4248860

#SPJ11

Answer:

1.46 M

Explanation:

M = mol ÷ Liters

26.489 / 46 = .576 mol of ethanol

density of water is 1g/ml, so the amount of liters of water (L) is 395 ÷ 1000 = .395 Liters

.576 ÷ .395 = 1.46 M

The predominant intermolecular force in [tex]NH_{3}[/tex] (ammonia) is hydrogen bonding.

This is because [tex]NH_{3}[/tex] contains a hydrogen atom bonded to a highly electronegative nitrogen atom, resulting in a highly polar molecule.

Hydrogen bonding occurs between a hydrogen atom in a polar molecule and a highly electronegative atom (in this case, the nitrogen atom in another [tex]NH_{3}[/tex] molecule).

This type of intermolecular force is stronger than the other two main types of intermolecular forces, which are London dispersion forces and dipole-dipole interactions.

Bromine ([tex]Br_{2}[/tex]) and iodine ([tex]I_{2}[/tex]) are both nonpolar molecules and only have London dispersion forces between them.

To know more about intermolecular force, refer here:

https://brainly.com/question/9007693#

#SPJ11

The equilibrium concentration of Ag⁺ and PO₃⁻⁴ are 2.35 x 10⁻⁶ M and 7.05 x 10⁻⁶ M, respectively.

First, we need to write the balanced chemical equation for the precipitation of Ag₃PO₄;

3AgNO₃ + Na₃PO₄ → Ag₃PO₄ + 3NaNO₃

According to the stoichiometry of the equation, 3 moles of AgNO₃ are required to react with 1 mole of Na₃PO₄ to form 1 mole of Ag₃PO₄. So, we need to find out which reactant is limiting.

The number of moles of AgNO₃ present in 0.100 L of 0.270 M solution is:

0.100 L x 0.270 mol/L = 0.027 mol AgNO₃

The number of moles of Na₃PO₄ present in 0.100 L of 1.00 M solution is:

0.100 L x 1.00 mol/L = 0.100 mol Na₃PO₄

According to the stoichiometry of the equation, 0.100 mol Na₃PO₄ would require 0.300 mol AgNO₃ (3 times as many moles). However, we only have 0.027 mol AgNO₃, which is the limiting reactant.

Therefore, all 0.027 mol of AgNO will react to form Ag₃PO₄. The amount of Ag₃PO₄ that will precipitate can be calculated using its solubility product constant (Ksp);

Ksp = [Ag⁺]³ [PO₃⁻⁴]

Ksp = (x)(3x)³ = 8.89 x 10⁻¹⁷

Solving for x gives;

x = [Ag⁺] = 2.35 x 10⁻⁶ M

[PO₃⁻⁴] = 3x = 7.05 x 10⁻⁶ M

Therefore, the concentrations of Ag⁺ is 2.35 x 10⁻⁶ M and the concentration of PO3-4 is 7.05 x 10⁻⁶ M, respectively.

To know more about concentration here

https://brainly.com/question/10725862

#SPJ4

The solution for this question is A. Destructive; constructive

The weathering of a tall mountain down into a low-lying hill involves the breakdown and erosion of the mountain over time, which is a destructive process. This process typically occurs due to various factors such as wind, water, and ice erosion, which gradually wear away the mountain's structure.

On the other hand, the buildup of sand dunes through the deposition of sediment is a constructive process. This occurs when wind or water carries and deposits sand or sediment in a specific location, gradually forming dunes over time.

Therefore, the weathering of a tall mountain represents a landform being changed through a destructive process, while the creation of sand dunes through the deposition of sediment represents a landform being created through a constructive process.

To know more about Weathering related question visit:

https://brainly.com/question/23449272

#SPJ11

The change in energy required to make 50.0 mL of water from its elements under standard conditions is approximately -793.5 kJ.

To calculate the change in energy required to make 50.0 mL of water from its elements under standard conditions, we need to first determine the number of moles of water being formed.

Water has a density of 1 g/mL, so 50.0 mL of water weighs 50.0 g. The molar mass of water (H₂O) is 18.02 g/mol. To find the number of moles, divide the mass by the molar mass:

moles of water = 50.0 g / 18.02 g/mol ≈ 2.775 moles

The standard molar heat of formation of water is -285.8 kJ/mol. Multiply this value by the number of moles to find the total change in energy:

Change in energy = 2.775 moles × (-285.8 kJ/mol) ≈ -793.5 kJ

So, the change in energy required to make 50.0 mL of water from its elements under standard conditions is approximately -793.5 kJ.

To learn more about heat, refer below:

https://brainly.com/question/1429452

#SPJ11

Essentially, "antiboil" is another term for the antifreeze's function of preventing the engine from overheating.

The antifreeze used in a car is a chemical mixture that is added to the engine's cooling system to prevent the engine from freezing in cold temperatures and overheating in hot temperatures, by raising the boiling point of the coolant.

This ensures that the car's cooling system maintains a stable and efficient temperature range, protecting the engine from overheating or freezing.

The term "antiboil" refers to the antifreeze's ability to prevent the engine's coolant from boiling and evaporating in high temperatures, which could cause the engine to overheat and potentially cause damage.

To know more about the antifreeze, click below.

https://brainly.com/question/16468627

#SPJ11

The correct answer is:

B. The light is getting bigger when it's waxing and smaller when it's waning.

Waxing and waning are terms used to describe the changing appearance of the Moon's illuminated portion as seen from Earth.

Waxing refers to the phase of the Moon when the illuminated area is increasing, starting from a New Moon and progressing towards a Full Moon. During the waxing phase, the Moon appears to grow larger and brighter.

Waning, on the other hand, refers to the phase of the Moon when the illuminated area is decreasing, starting from a Full Moon and progressing towards a New Moon. During the waning phase, the Moon appears to shrink in size and become less bright.

Therefore, the key difference between waxing and waning lies in the direction of change in the illuminated portion of the Moon. Waxing means the illuminated area is getting larger, while waning means the illuminated area is getting smaller.

to learn more about moon click here:brainly.com/question/30653068

#SPJ 11

During an aldol condensation reaction, both addition and elimination reactions occur. Oxidation-reduction and substitution reactions are not involved in this process.

Aldol condensation reaction involves the addition and elimination of a carbonyl compound, usually an aldehyde or ketone, under basic or acidic conditions. The reaction starts with the nucleophilic addition of the enolate ion of the carbonyl compound to another carbonyl compound, forming a beta-hydroxy aldehyde or beta-hydroxy ketone intermediate. This intermediate then undergoes dehydration through the elimination of a water molecule, resulting in the formation of an alpha,beta-unsaturated aldehyde, or ketone.

Therefore, aldol condensation is mainly an addition-elimination reaction, and there is no oxidation-reduction or substitution occurring during this process. In summary, a detailed and long answer would be that aldol condensation is a reaction where a carbonyl compound undergoes nucleophilic addition with another carbonyl compound under basic or acidic conditions, forming a beta-hydroxy aldehyde or beta-hydroxy ketone intermediate. This intermediate then undergoes dehydration, leading to the formation of an alpha,beta-unsaturated aldehyde, or ketone. There is no oxidation-reduction or substitution occurring during this process.

An aldol condensation reaction involves two main steps:
1. The addition of an enolate ion (generated from a carbonyl compound) to another carbonyl compound, forming a beta-hydroxy carbonyl compound (aldol).
2. Dehydration of the aldol, which is an elimination reaction, results in an alpha-beta unsaturated carbonyl compound.

So, during an aldol condensation reaction, both addition and elimination reactions occur. Oxidation-reduction and substitution reactions are not involved in this process.

Learn more about aldol reaction

https://brainly.com/question/28984750

#SPJ11

To compute the applied load, we need to use the equation: Load = constant x (Diagonal Length)^2. The constant for a material with a measured hardness of 164 HK is typically 0.2.

To compute the applied load for a material with a measured hardness (HK) of 164 and an indentation diagonal length of 0.24 mm, please follow these steps:

Step 1: Recall the formula for Knoop hardness (HK):
HK = P / A, where P is the applied load in kgf, and A is the projected area of the indentation in mm².

Step 2: Calculate the projected area of the indentation (A) using the formula:
A = 0.0703 * L², where L is the indentation diagonal length in mm (0.24 mm in this case).
A = 0.0703 * (0.24)²
A ≈ 0.00403 mm²

Step 3: Rearrange the HK formula to solve for the applied load (P):
P = HK * A
P = 164 * 0.00403
P ≈ 0.66092 kgf

Therefore, the applied load for the material with a measured hardness of 164 and an indentation diagonal length of 0.24 mm is approximately 0.66092 kgf.

To know more about hardness (HK) visit:

https://brainly.com/question/29729585

#SPJ11

The solubility product (Ksp) for Ce(IO₃)₃ at the given temperature is 3.16×10⁻¹⁰

First, we shall determine the concentration of Ce³⁺. Details below:

Ce(IO₃)₃(aq) <==> Ce³⁺(aq) + 3IO₃⁻(aq)

From the above,

3 moles of IO₃⁻ is present in 1 mole of Ce(IO₃)₃

Therefore,

5.55×10⁻³ M IO₃⁻ will be present = 5.55×10⁻³ / 3 = 1.85×10⁻³ M Ce(IO₃)₃

Now, we can see from the above equation that Ce(IO₃)₃ and Ce³⁺ are in a ratio of 1:1.

Since the concentration of Ce(IO₃)₃ is 1.85×10⁻³ M. Thus, the concentration of Ce³⁺ is also 1.85×10⁻³ M

Finally, we can determine the solubility product (Ksp). This is illustarted below:

Ce(IO₃)₃(aq) <==> Ce³⁺(aq) + 3IO₃⁻(aq)

Ksp = [Ce³⁺ ] × [Ce³⁺]³

Ksp = 1.85×10⁻³ × (5.55×10⁻³)³

Ksp = 3.16×10⁻¹⁰

Thus, we can conclude that the solubility product (Ksp) is 3.16×10⁻¹⁰

Learn more about solubility of product:

https://brainly.com/question/4530083

#SPJ4

The most likely event to occur as a result of a prominence on the Sun is option 2: The auroras would become visible.

A prominence is a large, bright, and relatively cool plasma structure that extends outward from the Sun's surface into the corona. It is associated with magnetic fields and is often observed as a loop or curtain-like structure. When a prominence erupts or releases material, it can lead to the formation of a coronal mass ejection (CME). Coronal mass ejections are large bursts of plasma and magnetic fields from the Sun that can travel through space. When a CME interacts with Earth's magnetosphere, it can cause geomagnetic storms. These storms can trigger the phenomenon known as the auroras, which are displays of colorful lights in the Earth's polar regions. As the CME and its associated magnetic fields interact with Earth's magnetosphere, they can cause the charged particles in the atmosphere to emit light, leading to the formation of auroras. The auroras are typically seen in high-latitude regions such as the Arctic (Northern Lights) and Antarctic (Southern Lights). Therefore, when a prominence leads to a CME and subsequent interaction with Earth's magnetosphere, it is most likely that the auroras would become visible as a result of this solar event.

Learn more about magnetic field here:

https://brainly.com/question/30331791

#SPJ11

When determining the concentration of an unknown sulfuric acid solution, a titration can be performed with a known concentration of sodium hydroxide.

Here are some additional details that may be helpful in understanding the process of titration:

The titration involves adding small amounts of the sodium hydroxide solution to the sulfuric acid solution until the reaction between the two is complete, which is indicated by a change in color of the indicator used. The volume of the sodium hydroxide solution used in the reaction can then be used to calculate the concentration of the sulfuric acid solution.

Learn More About sulfuric acid

https://brainly.com/question/10220770

#SPJ11

The procedure instructs to not clean the Mg electrode with nitric acid because nitric acid can react with and dissolve the Mg metal. This is because Mg is a more active metal than hydrogen, and reacts with the acid to produce hydrogen gas and Mg2+ ions.

according to the following reaction :-

Mg(s) + 2HNO3(aq) → Mg(NO3)2(aq) + H2(g)

The reaction produces hydrogen gas which can interfere with the electrochemical measurements by creating additional voltage and current signals.

Therefore, instead of nitric acid, Mg electrode is typically cleaned using a mixture of water and methanol, followed by rinsing with distilled water, to remove any contaminants or impurities from its surface before use in electrochemical measurements.

To know more about nitric acid refer here :-

https://brainly.com/question/29769012#

#SPJ11

To solve for the change in entropy, we can use the equation:

ΔS = nS°(products) - mS°(reactants)

where:

- ΔS is the change in entropy

- n and m are the stoichiometric coefficients of the products and reactants, respectively

- S° is the standard molar entropy of the substance

First, we need to write the balanced chemical equation for the combustion of silicon:

Si + O2 -> SiO2

From the equation, we can see that the stoichiometric coefficient of silicon is 1. Therefore, n = 1.

Next, we need to determine the standard molar entropy of silicon and silicon dioxide. According to standard tables, the values are:

S°(Si) = 18.8 J/(mol K)

S°(SiO2) = 41.8 J/(mol K)

Now we can substitute the values into the equation:

ΔS = nS°(SiO2) - mS°(Si)

Since all the silicon is consumed, m = 0.802 g / (28.09 g/mol) = 0.0286 mol.

ΔS = 1(41.8 J/(mol K)) - 0.0286 mol(18.8 J/(mol K))

ΔS = 0.919 J/K

Therefore, the change in entropy when 0.802 g of silicon is burned in excess oxygen to yield silicon dioxide at 298 K is 0.919 J/K.

To know more about entropy refer here

https://brainly.com/question/13135498#

#SPJ11

The amount of Hydrogen Fluoride that can be form from the given reaction is 22.08 g.

The balanced chemical reaction is given as,

5F₂ (g)  +  2NH₃ (g)  -->  N₂F₄ (g)  +  6HF (g)

According to the stoichiometry of the reaction

5 moles of F₂ reacts with 2 moles of NH₃

Given,

Mass of NH₃ = 42 g

=> Moles of NH₃ = 42 / 17 = 2.75 moles

Mass of F₂ = 35 g

=> Moles of F₂ = 35 / 38 = 0.92 moles

5 moles of F₂ reacts with 2 moles of NH₃

=> 1 mole of F₂ reacts with 2/5 = 0.4 moles of NH₃

=> 0.92 moles of F₂ reacts with 0.4 x 0.92 = 0.368 moles of NH₃

We see form the above calculations that NH₃ is present in excess of 2.75 - 0.368 = 2.38 moles

Hence F₂ is the limiting reagent of the reaction

From the stoichiometry 5 moles of F₂ reacts to produce 6 moles of HF

Hence,

0.92 moles of F₂ reacts to produce 0.92 x 6 / 5 = 1.104 moles of HF

=> Moles of HF produced = 1.104

=> Mass of HF = 1.104 x 20 = 22.08 g

Learn more about Mass from the link given below.

https://brainly.com/question/19694949

#SPJ4

Yes, liquid will be present. The mass of the liquid present will be 1498.85 g.

The density of water is approximately 1 g/mL or 1 g/cm³. Therefore, 1.15 g of water has a volume of 1.15 mL or 0.00115 L. Since the container has a volume of 1.5 L, there is still space for more liquid.

The container has a volume of 1.5 L, which is equivalent to 1500 mL or 1500 cm³. The volume of the water is 1.15 mL or 1.15 cm³. Therefore, the remaining volume of the container is 1498.85 mL or 1498.85 cm³.

Assuming that the container is completely filled with liquid, we can use the density of water to calculate the mass of liquid present.

Density = mass/volume

1 g/cm³ = mass/1498.85 cm³

mass = 1498.85 g

To learn more about density visit:

brainly.com/question/29775886

#SPJ11

The equations provided show the dissociation of various potassium salts in water, along with the ionization reactions of the weak acid anions they contain.

Potassium dihydrogen phosphate dissolving in water:

Potassium hydrogen sulfate dissolving in water:

Potassium hydrogen phthalate dissolving in water:

Potassium hydrogen tartrate dissolving in water:

Learn more about potassium salts: brainly.com/question/31563020

#SPJ11

There are approximately 0.1229 moles of strontium phosphate in 55.50 grams of the compound.

To determine the number of moles of strontium phosphate [tex](Sr_3(PO_4)_2)[/tex] in 55.50 grams, we need to use the concept of molar mass and Avogadro's number.  First, we calculate the molar mass of strontium phosphate by summing up the atomic masses of each element present in the compound. Strontium (Sr) has an atomic mass of approximately 87.62 grams/mol, phosphorus (P) has an atomic mass of approximately 30.97 grams/mol, and oxygen (O) has an atomic mass of approximately 16.00 grams/mol.  So, the molar mass of strontium phosphate is:

3(Sr) + 2([tex](PO_4)[/tex]) = 3(87.62) + 2(30.97 + 4(16.00)) = 261.86 + 2(30.97 + 64.00) = 261.86 + 2(94.97) = 261.86 + 189.94 = 451.80 grams/mol

Next, we use the formula:

moles = mass / molar mass

Plugging in the given mass of 55.50 grams and the molar mass of 451.80 grams/mol:

moles = 55.50 g / 451.80 g/mol ≈ 0.1229 mol

Learn more about  molar mass here:

https://brainly.com/question/30640134

#SPJ11

To prepare a 0.15 M solution using a 50 mL volumetric flask, the student needs to dissolve 0.15 moles of the salt in the flask. To find the mass of the salt needed, we can use the formula:
mass = moles x molar mass

So, mass = 0.15 moles x 20.163 g/mol = 3.02445 g
Therefore, the student should dissolve 3.02445 grams of the salt to prepare a 0.15 M solution in a 50 mL volumetric flask.To prepare a 0.15 M solution of the salt (molar mass = 20.163 g/mol) in a 50 mL volumetric flask, the student should dissolve:

grams of salt = (0.15 mol/L) x (20.163 g/mol) x (0.050 L) = 0.15195 g
The student should dissolve approximately 0.15195 grams of the salt.

To know more about volumetric flask visit-

https://brainly.com/question/15289714

#SPJ11