which element has the highest ionization energy?B, Al, Ga, In

Answer:

The Inert Pair effect renders Pb(II) as the more stable oxidation state of lead

Explanation:

SnBr4 + PbBr2 ---> SnBr2 + PbBr4

SnBr2 + PbBr4 ---->

The Inert pair effect is mostly observed between group 15-17 in the periodic table. It leads to stability of the lower oxidation state of an element.

The reason for the Inert pair effect is that the s electrons become Inert due to poor shielding of the d and f-electrons. The Inert pair effect is a tendency of the s electrons not to participate in bonding (remain an Inert pair).

Owing to the Inert pair effect, Pb II is more stable than Pb IV

Answer: The answer is 5.15x10^22

Explanation:

The formula unit present in a teaspoon of salt [tex]NaCl[/tex] having a mass of about 5.0 g is [tex]5.15 \times10^{22}[/tex] formula units.

Molar mass, also known as molecular weight, is the mass of one mole of a substance. It is calculated by summing up the atomic masses of all the atoms in a molecule. The unit of molar mass is grams per mole (g/mol).

Now, to determine the number of formula units in a teaspoon of salt (NaCl), we need to use Avogadro's number and the molar mass of NaCl.

Avogadro's number [tex](N_a)[/tex] is approximately. [tex]6.022 \times10^{23}[/tex] formula units per mole.

The molar mass of [tex]NaCl[/tex] is the sum of the atomic masses of sodium (Na) and chlorine ([tex]Cl[/tex]), which are approximately 22.99 g/mol and 35.45 g/mol, respectively.

To calculate the number of formula units in 5.0 g of [tex]NaCl[/tex], we can follow these steps:

Now, calculate the number of moles of [tex]NaCl[/tex] using its molar mass:

Moles = Mass / Molar mass

Moles = [tex]5.0 g[/tex] / [tex](22.99 g/mol + 35.45 g/mol)[/tex]

Calculate the number of formula units using Avogadro's number:

Formula units = [tex]Moles \times Avogadro's number[/tex]

Let's perform the calculation:

Molar mass of [tex]NaCl[/tex]= [tex]22.99 g/mol + 35.45 g/mol = 58.44 g/mol[/tex]

Moles of [tex]NaCl[/tex] = [tex]5.0 g[/tex] / [tex]58.44 g/mol[/tex] ≈ [tex]0.0856 mol[/tex]

Formula units = [tex]0.0856 mol \times (6.022 \times 10^{23})[/tex] formula units/mol ≈ [tex]5.15 \times10^{22}[/tex]formula units.

Therefore, there are approximately [tex]5.15 \times10^{22}[/tex] formula units in a teaspoon of salt ([tex]NaCl[/tex]) having mass [tex]5.0 g[/tex].

Learn more molar mass about here:

https://brainly.com/question/31545539

#SPJ2

Answer : The number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

Explanation : Given,

Concentration of NaBr = 0.200 M

Volume of solution = 100.0 mL = 0.1 L      (1 L = 1000 mL)

First we have to calculate the moles of NaBr.

[tex]\text{Moles of NaBr}=\text{Concentration of NaBr}\times \text{Volume of solution in L}[/tex]

[tex]\text{Moles of NaBr}=0.200M\times 0.1L=0.02mol[/tex]

Now we have to calculate the moles of precipitate, [tex]PbBr_2[/tex] formed.

The balanced chemical reaction is:

[tex]2NaBr(aq)+Pb(NO_3)_2(aq)\rightarrow PbBr_2(s)+2NaNO_3(aq)[/tex]

From the balanced chemical reaction we conclude that:

As, 2 moles of NaBr react to give 1 mole of [tex]PbBr_2[/tex]

So, 0.02 moles of NaBr react to give [tex]\frac{0.02}{2}=0.01[/tex] mole of [tex]PbBr_2[/tex]

Therefore, the number of moles of precipitate, [tex]PbBr_2[/tex] formed will be 0.01 moles.

The number of mole of the precipitate (i.e PbBr₂) formed when 100 mL of 0.2 M NaBr react with excess Pb(NO₃)₂ is 0.01 mole

Volume = 100 mL = 100 / 1000 = 0.1 L

Molarity of NaBr = 0.2 M

Mole = Molarity x Volume

Mole of NaBr = 0.2 × 0.1

2NaBr(aq) + Pb(NO₃)₂(aq) → PbBr₂(s) + 2NaNO₃ (aq)

From the balanced equation above,

2 moles of NaBr reacted to produce 1 mole of PbBr₂.

Therefore,

0.02 mole of NaBr will react to produce = [tex]\frac{0.02}{2} \\\\[/tex] = 0.01 mole of PbBr₂.

Thus, the number of mole of the precipitate (i.e PbBr₂) produced from the reaction is 0.01 mole

Learn more: https://brainly.com/question/19572703

Answer:

Number of moles = 10.6 mol

Explanation:

Given data:

Molar mass of H = 1.008 g/mol

Molar mass of C = 12.01 g/mol

Molar mass of O = 16.00 g/mol

Mass of citric acid = 2.03 kg (2.03×1000 = 2030 g)

Number of moles of citric acid = ?

Solution:

Formula:

Number of moles = mass/molar mass

Now we will calculate the molar mass of citric acid:

C₆H₈O₇ = (12.01× 6) + (1.008×8) + (16.00×7)

C₆H₈O₇ = 72.06 + 8.064+112

C₆H₈O₇ = 192.124g/mol

Number of moles = 2030 g/ 192.124g/mol

Number of moles = 10.6 mol

The number of moles in a 2.03 kg sample of citric acid is :

- 10.6 mol

Given:

Molar mass of H = 1.008 g/mol

Molar mass of C = 12.01 g/mol

Molar mass of O = 16.00 g/mol

Mass of citric acid = 2.03 kg (2.03×1000 = 2030 g)

Number of moles of citric acid = ?

Formula:

Number of moles = mass/molar mass

The molar mass of citric acid:

C₆H₈O₇ = (12.01× 6) + (1.008×8) + (16.00×7)

C₆H₈O₇ = 72.06 + 8.064+112

C₆H₈O₇ = 192.124g/mol

Number of moles = 2030 g/ 192.124g/mol

Number of moles = 10.6 mol

Learn more about "Molar Mass":

https://brainly.com/question/12127540?referrer=searchResults

Answer:

blocks 1 and 2 the rhdh huff hgfhh5

Answer:

Explanation:

From the information given :

The cis and trans isomer are in the ratio of 1:3, and the description of how the ratio of the cis- and trans-2-methylcyclohexanols from the 1H NMR spectrum can be explained as follows:

We are being told that the trans isomer's peak is 3.75 ppm (part per million). However, because the methyl group is far away from the OH group, it is less shilled than the cis isomer, which peaked at 3.05. Thus, the peak at 3.05 occurs in an area whose integration is three (3) times more than the peak at 3.75.

Answer:

The new pressure will be  

1000 L

, rounded to one significant figure.

Explanation:

Boyle's law states that when a gas is held at a constant temperature and mass in a closed container, the volume and pressure vary inversely. The equation to use is  

P

1

V

1

=

P

2

V

2

.

Given

V

1

=

200

mL

×

1

L

1000

mL

=

0.2 L

P

1

=

700 mmHg

V

2

=

100

mL

×

1

L

1000

mL

=

0.1 L

Unknown

P

2

Equation

P

1

V

1

=

P

2

V

2

Solution

Rearrange the equation to isolate  

P

2

and solve.

P

2

=

P

1

V

1

V

2

P

2

=

(

700

mmHg

×

0.2

L

)

0.1

L

=

1400 L

, which must be rounded to  

1000 L

because all of the measurements have only one significant figure

Explanation:

Answer:

Chelation is a type of bonding of ions and molecules to metal ions. It involves the formation or presence of two or more separate coordinate bonds between a polydentate ligand and a single central atom. These ligands are called chelants, chelators, chelating agents, or sequestering agents.

Answer:

Chemical compound that react with metal ions. They can form several covalent bonds to a metal without changing its own structure.

Explanation:

There's a list of chelating agents you can find in your book probably. An application of chelating agents is to transport metal ions across the membranes.

you should also know:

Chelating agents are any compound that reacts with a metal ion to produce a metal ion.

Ligand ion molecule or functional group that binds to another chemical to make a larger complex.

They are used to detoxify poisonous metal agents by binding and converting them so the body can excrete them without further harm.

Answer: here is your answer

Explanation: You are visiting your Grandmother and notice that she is eating a balanced diet, taking vitamins, getting the proper amount of sleep and is not overweight. Despite her healthy lifestyle, she appears run down and tired. You realize that it's due to her lack of physical activity. Write a convincing letter to your grandma explaining the benefits of participating in regular physical activity.

Answer:

D

Explanation:

trust me bro ive done this

Option D does not represent an example of plants demonstrating the characteristics of life.

The following information should be considered:

Therefore we can conclude that Option D does not represent an example of plants demonstrating the characteristics of life.

Learn more: brainly.com/question/20934155

Answer:

Explanation:

The kinetic energy of an object can be found by using the formula

[tex]KE = \frac{1}{2} m {v}^{2} \\ [/tex]

where

m is the mass

v is the velocity

From the question we have

[tex]KE = \frac{1}{2} \times 0.46 \times {25}^{2} \\ = 0.23 \times 625[/tex]

We have the final answer as

Hope this helps you

Answer:Fe(s) + Sn^2+(aq) ----> Fe^2+(aq) + Sn(s)

Explanation:

The net ionic equation involved is;

Fe(s) + Sn^2+(aq) ----> Fe^2+(aq) + Sn(s)

We must recall that iron is above tin in the electrochemical series. The implication of this is that, iron has a more negative reduction potential compared to tin.

A metal can displace metals below it in the electrochemical series from their aqeous solution. Hence, iron displaces tin from it's solution.

Answer: a) A decrease in the solubility of an ionic compound as a result of the addition of a common ion : Common ion effect

b) The mass of a salt in grams that will dissolve in 100 mL of water: Solubility

c) A solution that has dissolved the maximum amount of a compound at a given temperature. Any further addition of salt will remain undissolved: Saturated solution

d) The product of the molarities of the dissolved ions, raised to a power equal to the ion's coefficient in the balanced chemical equation : Solubility product constant

e) The maximum number of moles of a salt that will dissolve in 1 L of solution : Molar solubility

Explanation:

Solubility is expressed usually as the mass of solute per 100 grams or 100 ml of solvent.

Molar solubility of a solid is expressed as the concentration of the dissolved solid in a saturated solution.

Solubility product constant is defined as the equilibrium constant in which a solid ionic compound is dissolved to produce its ions in solution. It is represented as [tex]K_{sp}[/tex]

The common-ion effect is the decrease in solubility of a sparingly soluble salt by the addition to the solution of a soluble compound with an ion in common with the precipitate.

Saturated solution is defined as the solution in which no more solute particles can be dissolved in the solvent.

Answer:

X indicates proteins Y indicates lipids

Explanation:

X shows membrane bound proteins. Y shows lipids in the plasma membrane.

Answer:

I think that x indicates proteins and y indicates lipids

Explanation:

Proteins often are channels that help things get in and out of the cell, and x looks like one.

Membranes are made of phospholipids, which are types of lipids. Y is a lipid.

Answer:

atom

Explanation:

the atom is the smallest form.

Answer:

It is more difficult to remove electrons from a noble gas than it is to remove electrons from elements in other groups.

Explanation:

Let me restate here that in the noble gases, the outermost shell is filled. Owing to this full shell, noble gases has the outermost eight electrons required  for any specie to attain stability.

It is very difficult to remove an electron from a closed shell. This is why the first ionization energy of noble gases is usually far higher than that of elements from other groups.

Answer:

You would add its kinetic and potential energies.

Explanation:

Hope this helps!! :)

Answer:

A) Add its kinetic and potential energies

Explanation:

I got it right on Edge 2022

Answer: The answer is D.

Explanation:

The form of energy associated with the motion, position, or shape of an object is called mechanical energy. An object's mechanical energy is a combination of its potential energy and its kinetic energy. The basketball has both potential energy and kinetic energy.

Hope this helps!

Answer:

It's a heterogeneous mixture.

Explanation:

Diamond is made of just one element: carbon. Each carbon atom in diamond is connected to four other carbon atoms, in a crystal that extends on and on. There are other forms of pure carbon where the atoms are bonded differently, notably charcoal and graphite.

Answer:

It's a heterogeneous mixture.

Explanation:

Diamond is made of just one element: carbon.

Answer:

Explanation:

Materials are clothes and heavy rope

Answer:

Metamorphism is the change of minerals or geologic texture (distinct arrangement of minerals) in pre-existing rocks (protoliths), without the protolith melting into liquid magma (a solid-state change). The change occurs primarily due to heat, pressure, and the introduction of chemically active fluids.

Explanation:

i hope this helps :)

Answer:

Fluorine is a non-metal, fills its shell by gaining one electron and becomes a negatively charged ion.

Explanation:

Fluorine have seven electrons in its outermost shell. This means that fluorine is located in Group 17(Halogens) in the Periodic Table. Note that halogens are non-metal elements. So fluorine is a non-metal.

Fluorine fills its shell by gaining one electron because it only needs one electron to achieve stable octet electron arrangement. ( it's easier to gain one electron than to lose all seven electrons in the outermost shell)

As fluorine atom gain one electron to achieve stable octet electron arrangement, its number of electrons becomes greater than its number of protons. So it becomes a negatively charged ion.

Answer:

pH = 10.113

Explanation:

Here, we can find pOH first:

pOH = [tex]-log([OH^-])[/tex] = 3.886.

Then, we can find pH which is 14 - pOH. We then get the answer above.

Then, we can find pH which is 14 - pOH. We then get the answer above.

The pH of acid is between 0-7 on pH scale while for base pH range is from 7-14. Thus the pH of 1.3×10⁻⁴  M  bleach solution is 10.62.

pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. More the value of hydronium ion concentration, more will be the solution acidic.

On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. pH depend on the temperature. At room temperature pH scale is between 0 to 14. pH of neutral solution is 7

The concentration of bleach solution  is 1.3×10⁻⁴ M

Concentration of OH⁻=1.3×10⁻⁴ M

Mathematically,

pOH=-log[OH⁻]

Substituting the values

pH=-log[1.3×10⁻⁴]

    =  3.886.

pH+ POH=14

pH=14-3.886.=10.62

Therefore,  the pH of 1.3×10⁻⁴  M  bleach solution is 10.62.

To learn more about pH, here:

https://brainly.com/question/27945512

#SPJ3

Answer:

solute

Explanation:

Answer:

8.937g/cm³

Explanation:

To answer this question we need to know that, in 1 unit FCC cell you have:

Edge length = √8 * R

Volume = 8√8 * R³

And there are 4 atoms per unit cell

Mass of 4 atoms in g:

4 atom * (1mol / 6.022x10²³atom) * (63.55g / mol) = 4.221x10⁻²²g

Volume in cm³:

0.1278nm * (1x10⁻⁷cm / 1nm) = 1.278x10⁻⁸cm

Volume = 8√8 * (1.278x10⁻⁸cm)³

Volume = 4.723x10⁻²³cm³

And density is:

4.221x10⁻²²g / 4.723x10⁻²³cm³ =

Answer:

swap

Explanation: because it is a low wet land

Answer:

4.   swamp

5.   Island

Plz mark brainliest:)

Answer:

25.82°C

Explanation:

Based on the reaction, 1 mole of HCl and 1 mole of NaOH reacts, that means the reaction is 1:1. The moles of each compound are:

Moles HCl:

0.025L * (0.144mol/L) = 0.0036 moles HCl

Moles NaOH:

0.020L * (0.132mol/L) = 0.00264 moles NaOH

Thus, moles of reaction are 0.00264 moles

The heat released in a calorimeter is obtained using the equation:

Q = m*c*ΔT

Where Q is heat released in the reaction:

0.00264 moles * (-57.62kJ/mol) = 0.1521kJ = 152.1J of reaction

m is mass of the solution:

25.0mL + 20.0mL = 45mL * (1.04g/mL) = 46.8g

c is specific heat of the solution:

3.93J/gºC

And ΔT is change in temperature.

Solving for ΔT:

Q /mc = ΔT

151.2J / 46.8g*3.93J°C = 0.82°C = ΔT = Final temperature - Initial temperature.

Final temperature = 0.82°C + 25°C =

Metals typically lose electrons to complete their octet in a reaction with non-metals, whereas non-metals typically acquire electrons to complete their octet. Ionic compounds are typically formed via reactions between metals and nonmetals. The given compound barium hydroxide is ionic.

Ions with the opposite charge are carefully packed together to form crystalline solids. Ionic compounds typically result from reactions between metals and non-metals. The electrostatic interaction between the positive and negative ions holds ionic solids together.

Baryta, commonly known as barium hydroxide, has the chemical formula Ba(OH)₂. It is an odorless, clear-white powder. It has a toxic disposition. It is ionic in nature, with two hydroxide ions per molecule of barium hydroxide (Ba(OH)₂ in an aqueous solution an example.

To know more about ionic compound, visit;

https://brainly.com/question/13058663

#SPJ6

Answer:

Density of block of gold is 3.5 g/cm³.

Explanation:

Given data:

Volume of block = 1000 mL

Mass of block = 3.5 kg (3.5×1000 = 3500 g)

Density of block = ?

Solution:

Density of substance is calculated by dividing the mass of substance over its volume.

Formula:

d = m/v

d = 3500 g/ 1000 mL

d = 3.5 g/mL

or

d = 3.5 g/cm³             (1ml = 1cm³)