Answer:
True
Explanation:
I guess you made a mistake on question.
but I understood what you wanted to say.
Hope this helps... :)
Susan claims that she can throw a dart at a dartboard from a distance of 3.0m and hit the 5.0cm wide bull's-eye if she throws horizontally with a speed of 20 m/s. She starts to throw at the same height as the top of the bull's-eye. Will Susan hit the bull's-eye?
What is being asked? How to calculate?
If a receiver is overly selective:
A) the tank circuits within the tuned amplifiers have insufficient Q.
B) too much noise is picked up and amplified by the receiver.
C) only part of the bandwidth of the AM signal is amplified, causing some of the sideband information to be lost and distortion results.
D) the volume control is turned up to maximum, the desired station is very weak.
Answer:
C) only part of the bandwidth of the AM signal is amplified, causing some of the sideband information to be lost and distortion results.
Explanation:
Selectivity is the ability of a receiver to respond only to a specific signal on a wanted frequency and reject other signals nearby in frequency.
If a receiver is overly selective, only part of the bandwidth of the AM signal is amplified, causing some of the sideband information to be lost and distortion results. Whereas, if a receiver is underselective, the receiver can pick different signals on different frequencies at the same time.
1. Which of the following is the most active in the Philippines?
a. Arayat
b. Hibok-Hibok
c. Kanlaon
d. Mayon
2. Which of the following theories states that the Earth's outer layer is broken into large slowly moving pieces?
a. Big Bang Theory b. Gravitational Theory c. Plate Tectonics Theory d. Theory of Relativity
3. Which type of plate boundaries where two plates are moving away from each other?
a Convergent b. Divergent
c. Fault d. Transform
4. Which of the following refers to the pattern of movement that forms when warm material rises, and eventually sinks
when it cools down.
a. Convection cell
b. Fault
c. Heat
d. Mantle
5. Which of the following forms of electromagnetic wave has the LONGEST wavelength range?
a. microwave
b. radio wave
c. ultraviolet
d. x-ray
6. Which of the following electromagnetic waves has the SHORTEST wavelength range?
a. infrared
b. ultraviolet
c. visible light
7. Which kind of wave is use in night vision goggles?
a. microwave
b. gamma ray
c. infrared
d. visible light
8. The image you see in a plane mirror is called a
image because it is not a real, physical object.
a imaginary
b. physical
c. reflected
d. virtual
9. Which of the following structures of the male reproductive system is responsible in producing sperm cells?
a penis
b. prostate gli
c. scrotum
d. testis
10. The movement of individuals into an area
d immigration
d. X-ray
Answer:
1 d
2c
3b
4a
5b
6 I think the answer is x-ray
7c
8d
10d( Immigration)
a car travelled at 50km/hr for 3 hours, how far did the car travel
Answer:
The answer answer is 150 km
Answer:
Explanation:
Distance =Speed×time
Speed=50km/hr
Time=3hours
Hence the Distance will be(50km/hr×3hours)
The answer is 150km
.Una moto circula a 72km/h. Frena hasta detenerse y tarda 10 segundos en dicha operación.
Calcula su aceleración. Calcula la distancia que recorrió hasta detenerse.
Answer:
I. Aceleración, a = -2 m/s²
II. Distancia, S = 100 metros
Explanation:
Dados los siguientes datos;
Velocidad inicial = 72 km / h
Tiempo = 10 segundos
Velocidad final = 0 m/s
Conversión:
72 km/h a metros por segundo = 72 * 1000/3600 = 72000/3600 = 20 m/s
I. Para encontrar la aceleración, usaríamos la primera ecuación de movimiento;
[tex] V = U + at[/tex]
Dónde;
V es la velocidad final. U es la velocidad inicial. a es la aceleración. t es el tiempo medido en segundos.Sustituyendo en la fórmula, tenemos;
[tex] 0 = 20 + a*10 [/tex]
[tex] -20 = 10a [/tex]
[tex] Aceleracion = \frac{-20}{10}[/tex]
Aceleración, a = -2 m/s²
Nota: el signo negativo indica desaceleración o retraso.
II. To find the acceleration, we would use the third equation of motion;
[tex] V^{2} = U^{2} + 2aS [/tex]
Dónde;
V es la velocidad final. U es la velocidad inicial. a es la aceleración. S es la distancia.Sustituyendo en la fórmula, tenemos;
[tex] 0^{2} = 20^{2} + 2*(-2)*S [/tex]
[tex] 0 = 400 - 4S [/tex]
[tex] 4S = 400 [/tex]
[tex] S = \frac {400}{4}[/tex]
Distancia, S = 100 metros
a cell of EMF 1.5 volt is connected in series with a resistor of Resistance 3 ohms a high resistance voltmeter connected across the cell registers 0.9 volt calculate the internal resistance of the cell
Answer:
0.6 resistance
The chart shows data for four moving objects. Which object has the greatest acceleration?
Answer:
Y
Explanation:
Acceleration = (v-u)/t
W = (29-11)/6 = 3
X = (34-10)/12 = 2
Y = (40-12)/7 = 4
Z = (28-20)/8 = 1
So the answer is Y = 4.
Hope this will help. Please mark me brainliest.
A train starts from rest and leaves Greenburg station with an acceleration of 1.20 meters per second2. How long does it take the train to travel a distance of 500 meters?
Answer:
Time, t = 28.87 seconds
Explanation:
Given the following data;
Acceleration = 1.20 m/s²
Distance = 500 meters
Initial velocity = 0 m/s
To find the time to cover the distance, we would use the second equation of motion;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Where;
S represents the displacement or height measured in meters.
u represents the initial velocity measured in meters per seconds.
t represents the time measured in seconds.
a represents acceleration measured in meters per seconds square.
Substituting into the equation, we have;
[tex] 500 = 0*t + \frac {1}{2}*(1.2)*t^{2}[/tex]
[tex] 500 = 0 + 0.6*t^{2} [/tex]
[tex] 500 = 0.6t^{2} [/tex]
[tex] t^{2} = \frac {500}{0.6} [/tex]
[tex] t^{2} = 833.33 [/tex]
Taking the square root of both sides, we have;
[tex] t = \sqrt{833.33} [/tex]
Time, t = 28.87 seconds
In the 4 X 100M relay, how long is the acceleration zone..
a) 20M
b) 30M
c) 40M
d) 100M
Answer:it’s 400 meters
Explanation:
to produce a magnetic field, what does an electromagnet require?
Explanation:
hope it helps
pls mark me as brainliest thanks❤
Compared to stored analog data, what is a disadvantage of stored digital
data?
A. Multiple copies of the stored data take up very little space.
B. They lose quality when they are copied several times.
O
C. Stored data are made up of only two different values.
D. They are vulnerable to hackers and viruses.
Answer:
D
Explanation:
Let's analyze each option.
A "Multiple copies of the stored data take up very little space."
This is actually true, and it is a positive aspect, as stored digital data does not need any "physical space", it only needs memory and not a lot of it.
So storing data digitally is way more efficient than storing analog data.
B: "They lose quality when they are copied several times."
The data shouldn't change when it is copied, so you should not see a lose in quality.
C: "Stored data are made up of only two different values."
True, but as we know, we can define a lot of things with only two values (zeros and ones), so this is not really a disadvantage.
D: "They are vulnerable to hackers and viruses."
This is true, when you store your data digitally you become vulnerable to hackers stealing your data, so you need to get informatic security in order to protect your data. The same thing with viruses, if you have all your data stored in a given device, and the device becomes infected, there is a chance that you just lost all your data, so you need to have multiple backups of your important information, and again, some protection against viruses.
The correct option is D.
Answer:
D
trust me i just did it
Explanation:
what are the 3 formulas which describe the relationship between mass force and acceleration
Explanation:
Newton's second law of motion gives the relation between mass, force and acceleration.
We know that,
Force, F = mass (m) × acceleration (a)
or
[tex]m=\dfrac{F}{a}[/tex]
or
[tex]a=\dfrac{F}{m}[/tex]
Hence, this is the required solution.
A woman pushes a car with a force of 400 N for a distance of 15m. How much work has she done?
Answer:
the work done by the woman is 6,000 J
Explanation:
Given;
force applied by the woman, F = 400 N
distance moved by the woman, d = 15 m
The work done by the woman is calculated as follows;
W = F x d
W = 400 N x 15 m
W = 6000 Nm = 6,000 J
Therefore, the work done by the woman is 6,000 J
A car and a large are moving with the same velocity. Which of the two is more difficult to
slow down? Why?
(Serious Answers Please)
Whichever object has more mass will need more energy to slow it down.
We don't know the mass of the car or the mass of the large.
None of this has anything to do with "difficult". We don't know what's difficult for you, and we don't know the SI unit of "difficult".
4 kg
4 kg
4 kg
Height =1.6 m
Teacher
Position 2
Height = 1.6 m
Edit
LEI
:
5. Let's say that the teacher raised the lawn bowling ball to a height of 1.6 meters before
they released it. THE LAWN BOWLING BALL HAS A MASS OF 4KG. Remember that
"g" ALWAYS equals 9.8 m/s?. Calculate the gravitational potential energy of the lawn
bowling ball at this position (position 1).
Answer:
E = 62.72 J
Explanation:
Given that,
The mass of a ball, m = 4 kg
The teacher raised the lawn bowling ball to a height of 1.6 meters before they released it.
We need to find the gravitational potential energy of the ball.
We know that,
E = mgh
Where
g is acceleration due to gravity
So,
E = 4 kg × 9.8 m/s² × 1.6 m
E = 62.72 J
So, the gravitational potential energy of the ball is equal to 62.72 J.
The rhinestones in costume jewelry are glass with index of refraction 1.50. To make them more reflective, they are often coated with a layer of silicon monoxide of index of refraction 2.00. What is the minimum coating thickness needed to ensure that light of wavelength 576 nm and of perpendicular incidence will be reflected from the two surfaces of the coating with fully constructive interference
Answer:
[tex]T=62.9*10^{-9}[/tex]
Explanation:
From the question we are told that:
Index of refraction of Rinestones [tex]\gamma_1 =1.5[/tex]
Index of refraction of silicon [tex]\gamma_2 =2.0[/tex]
Wavelength [tex]\lambda=576nm=576*10^{-9}[/tex]
Let each layer have thickness T
Therefore
Total Thickness =2T
Generally the equation for Constructive interference is mathematically given by
[tex]2T=(m+0.5)\frac{l\lambda}{\gamma_2}[/tex]
Where
[tex]M=0[/tex]
[tex]2T=(0+0.5)\frac{576*10^{-9}}{2*2.0}[/tex]
[tex]T=62.9*10^{-9}[/tex]
what is the difference between torque and the moment of a force
Answer:
Torque Of a Force: If The Force has tendency or Bends The Body about Longitudinal axis of the Body it is Torque. Moment Of a Force :If Force has Tendency to or Rotates the Body about Transverse asis the Body It is Moment .
Explanation:
Rewrite the false statements correctly
1.A hydrometer sinks less in a lighter liquid
2.The upthrust is equal to the weight of the liquid displaced by the body
Explanation:
A hydrometer sinks more in a lighter liquid
as water begins to boil in the kettle the hotter water at the bottom of the kettle closest to the stove begins to rise and the cooler water a above sinks warms. why does the occur?
Answer:
condensation?
Explanation:
HELPPPPPPPP!!!!! PLZZZ
Answer:
1- 31.25
2-?
3-?
Explanation:
What happens when a negatively charged object A is brought near a neutral object B?
A.
Object B gets a negative charge.
Ο
O o
B.Object B gets a positive charge.
O C.
Object B stays neutral but becomes polarized.
D.
Object A gets a positive charge.
O
E.
Object A loses all its charge.
Reset
Next
Answer:
A.
Explanation:Object b will get a negative charge .
How does Newton's third law explain how a rocket is launched upward?
Answer:
At lift-off, hot burning gas is pushed downwards by the rocket motors. The hot gas pushes back on the rocket in an upwards direction. When this upwards push, or thrust, exceeds the weight of the rocket, the forces acting on the rocket are unbalanced and the rocket accelerates upwards
Explanation:
Answer:
A. Gases from burning fuel are pushed out of the bottom of the rocket, and these gases push back on the rocket with an equal amount of force.
Explanation:
what is the speed of a wave with a wavelength of 3.0 m and a period of 0.40 s?
¿Qué juegos se practicaban en esa Época? ¿Qué nombre tenían los juegos? ¿En qué consistía cada uno de los juegos? ¿Cómo se iniciaba y finalizaba el juego?
La respuesta correcta para esta pregunta abierta es la siguiente.
A pesar de que se te olvidó especificar el país al que te refieres y a la fecha específica para saber de qué época estás hablando, te podemos ayudar comentando lo siguiente.
¿Qué juegos se practicaban en esa Época?
Anterior al surgimiento de la era digital y la era de los "gammers," los niños y la juventud en general salían a la calle o al parque a realizar diferentes actividades físicas y recreativas. Había juegos de ronda, juegos deportivos, juegos de destreza, y juegos de mesa.
¿Qué nombre tenían los juegos?
Había juegos que se llamaba "Doña Blanca," "La Roña," "Lobo estás ahí," "Las escondidas," "canicas," el yoyo," "el trompo," "el burro castigado," "las cebollitas," "el látigo," además de las "cascaritas" que eran juegos de soccer o futbol americano en las calles y con equipos formados por tus amigos.
¿En qué consistía cada uno de los juegos?
Si jugabas canicas, tenías que golpear una canica con otra para desplazarla y llevarla a cierto lugar. O tenías que meterla en agujeros.
Si jugabas, "Doña Blanca," formabas un círculo entrelazado de las manos. Mientras cantabas la canción de Doña Blanca, alguien que estaba afuera del círculo trataba de romperlo, tratando de soltar algunas de las manos entrelazadas.
La verdad era sumamente divertido, creativo, te reías, mucho, y lo mejor de todo era que hacías ejercicio y no te quedabas sentado todo el día frente a una pantalla de computadora.
1. The electromagnetic spectrum is the range of all types of radiation.
a. index of refraction
b. EM
c. laser
Answer:
EM
Explanation:
The index of refraction is a special property that shows how light travels through different medias. It does not concern itself with the spectrum, only what it will do to that spectrum under laboratory conditions.
Laser light is a very narrow concentrated light form. It is not the entire spectrum, but only a very small part of it.
The answer you want is EM Electromagnetic Radiation
What is the current in the 60.0 resistor
Answer:
Option (c)
Explanation:
According to question,
R= 60 ohm
V=120 V
Current can be calculated as :
[tex]I=\frac{V}{R}[/tex]
Where,
I is current
V is voltage
R is resistance
[tex]I=\frac{120}{60} \\I=2 A[/tex]
Current is flowing across 60 ohm will be 2.0 A
Therefore, option c is correct
Un hombre de pie puede ejercer la misma fuerza con sus piernas tanto en la tierra como en la luna. Sabemos que la masa del hombre es la misma en la Tierra y en la Luna. También sabemos que F=m x a (masa x aceleración, corresponde a la 2° Ley de Newton), es verdad tanto en la Tierra y la Luna. ¿Será el hombre capaz de saltar más alto en la Luna que en la Tierra? ¿Por qué o por qué no?
Answer:
The height jumped by the person on the moon is 6 times the height jumped by the person on earth.
Explanation:
As we know that the acceleration due to gravity on moon is 1/6 of the acceleration due to gravity on earth.
So, it is false.
Let the mass of man is m and the gravity on moon is g' = g/6.
Let the height jumped on earth is h and the height jumped on moon is h'.
So,
m x g' x h' = m x g x h
g/6 x h' = g x h
h' = 6 h
So, the height jumped by the person is 6 times the height jumped by the person on earth.
Please answer !!!A company wants to install a sensor to monitor the light level in the offices of their buildings. The sensor contains an LDR which has a resistance of 10kohlms in daylight and 100kohlms in the dark . The choice of resistor in the circuit is between one of 25kohlms and 1 megaohlm. The input p.d to the sensing circuit of 12 v . State and explain which resistor is the best choice for the circuit in light and dark which each of the resistors . You could put your calculations in a table .
Answer:
Explanation:
The sensor contains an LDR which has a resistance of 10kohlms in daylight and 100kohlms in the dark.
If the resistor in the circuit is 1 megaohlm, the total resistance in daylight and darkness will be 1.01 megaohms and 1.1 megaohlms.
The percentage difference = (1.1-1.01)/1.1*100% = 8.18%
If the resistor in the circuit is 25 kohlm, the total resistance in daylight and darkness will be 35 kohms and 125 kohlms.
The percentage difference = (125-35)/125*100% = 72%
With the input p.d to the sensing circuit fixed at 12 v, the sensing current will change according to the total resistance. A 72% difference is much more detectable. So the 25 kohm resistor is the better choice.
Answer:
Explanation:
V=IR
I=12/(R of resistor + R of LDR)
R of LDR = 10kohm in light and = 100kohm in dark
R1 = 25kohm
R2 = 1Mohm
solve 4 current
light dark
R1 12/(25+10)=0.343mA 12/(25+100)=0.096mA
R2 12/(1000+10)=0.012mA 12/(1000+100)=0.011mA
so R1 is better as its easier 2 tell its light or dark
A educação física, enquanto componente curricular da educação básica. Qual a tarefa que educação física?? Alguem me ajuda por fvr ??
Answer:
como assim qual a tarefa que educação física? se você me explicar melhor eu consigo te responder !!
Explanation:
a) How much electrical energy, in joules, does a 1000W space heater consume when it runs for 8h? (b) How much energy is that in kilowatt hours? (c) Calculate the cost of using this heater if 1kWh costs 0.5 dollars.
Answer:
a. Energy = 28800000 Joules
b. Energy = 8 Kwh
c. Cost = $4
Explanation:
Given the following data;
Power = 1000 Watts
Time = 8 hours
Cost = $0.5 per KWh
Conversion:
1 hour = 60 * 60 = 3600 seconds
8 hour = 8 * 3600 = 28800 seconds
a. To find much electrical energy, in joules;
Energy = power * time
Energy = 1000 * 28800
Energy = 28800000 Joules
b. To find how much energy is that in kilowatt hours;
Energy = power * time
Energy = 1000 * 8
Energy = 8000 Watt-hour = 8000/1000 = 8 Kwh (1 Kilowatts is equal to 1000 watts).
c. To calculate the cost of using this heater;
Cost = 8 * 0.5
Cost = $4