When a sodium atom becomes an ion, the size of the atom
A
decreases by losing an electron,
B
decreases by gaining an electron,
с
increases by losing an electron,
D
increases by gaining an electron,

Answers

Answer 1
decreases by losing an electron

Sodium has an electron configuration of 2-8-1. Since sodium is a metal, it loses that one electron and becomes a positive ion. Since it is losing an electron, it is decreasing in size.

Related Questions

the ability of atoms to attract electrons from surrounding atoms is called

Answers

Answer:

Electronegativity

Explanation:

The ability of an atom to attract itself an electron pair shared with another atom in a chemical bond.

What is the chemical name of the covalent compound SF6?

Answers

Answer:

The name of it is Sulfur Hexafluoride

Explanation:

Bonus fact: It is over 5 times heavier than air so when inhaling it, it makes your voice go very deep. The opposite of helium some would say

Calculate the pH of a hydrochloride acid solution, HCl, whose hydronium ion (H3O)+ concentration is 8.29 X 10-4 M.

Note: answer should have three significant figures

Answers

Answer:

Explanation:

Calculate the pH of a hydrochloride acid solution, HCl, whose hydronium ion (H3O)+ concentration is 8.29 X 10-4 M.

Note: answer should have three significant figures

Why is oxygen reduced in the reaction of hydrogen with oxygen to make water

Answers

Answer:

A. Oxygen pushes electrons towards the hydrogens.

Explanation:

The oxygen is reduced because it undergoes a partial gain of electrons. The oxygen atom in water has greater electron density near it than they did in the O₂ molecule.

What is Reduction Reaction ?

Reduction is a chemical reactions in which the number of electrons associated with an atom or a group of atoms is increased.

The electrons taken up by the substance reduced are supplied by another substance, which is thereby oxidized.

The hydrogen is oxidized because it added oxygen to form water.

Conversely the oxygen is reduced because it added hydrogen to form water.

Therefore, The oxygen is reduced because it undergoes a partial gain of electrons. The oxygen atom in water has greater electron density near it than they did in the O₂ molecule.

Learn more about Reduction reaction here ;

https://brainly.com/question/14698511

#SPJ2

Why do some animals migrate in and out of the coniferous forest? (select two) Food Cover Precipitation Temperature

Answers

Answer:Tep/Shel/

Explanation:

Answer:

it's food and procipitation

Explanation:

how many CO grans are produced from 1.80 mol of sulfur dioxide2

Answers

Answer:

A mol (approximately)represents the number 6.02 X 10^^23. Mols become useful when we learn that, for any element on the periodic table, 6.02 X 10^^23 atoms of that element have a mass equal to the atomic mass in grams. So, on the periodic table carbon has an atomic mass of 12.011. That means: 12.011 grams of carbon is made up of 6.02 X 10^^23 atoms.

The above question is tricky.

If the question considers 1 molecule of SO2 as a particle, then the answer is 1.80 * 6.02 X 10^^23

If the question considers the S as one particle, and the O2 as 2 more particles, then the answer is: 3 * 1.8 * 6.02 X 10^^23.

Explanation:

hope it helps U

What is not a part of the digestive system

A. Large intestine

B. Small intestine

C.Trachea

D. Esophagus

Answers

Answer:

Trachea is not the part of digestive system

Explanation:

Trachea is the part of the respiratory system

Suppose that a 10-mL sample of a solution is to be tested for I− ion by addition of 1 drop (0.2 mL) of 0.13 M Pb(NO3)2.
What is the minimum number of grams of I− that must be present in order for PbI2(s) ( Ksp=8.49×10−9 ) to form?

Answers

The minimum number of grams of I that must be present is ; 0.01836 * 10⁻³ mol

Given data :

Volume of solution to be tested for I-ion = 10 mL

Volume of  Pb(NO₃)₂ = 0.2 mL

molarity of Pb(NO₃)₂ = 0.13 M

Determine the number of I that must be present

First step : calculate conc of PB²⁺ ions in the solution

conc of PB²⁺ ions =  ( molarity of Pb(NO₃)₂ * volume of  Pb(NO₃)₂ ) / ( total volume )

                              = ( 0.13 * 0.2 ) / ( 10 + 0.2 )

                              = ( 0.026 ) / ( 10.2 )  = 0.002549 M

Next step : determine the molarity of  I

using the dissociation reaction of PbI₂

PbI₂(s) ---> Pb²⁺ (aq)  + 2I (aq)

also;  Ksp = [ Pb²⁺ ] [ I ]²  ---- ( 1 )

From the question the given value of Ksp = 8.49 * 10⁻⁹

Therefore equation ( 1 ) becomes

8.49 * 10⁻⁹ = ( 0.002549 ) * [ I ]²

[ I ] = √ ( 8.49 * 10⁻⁹ ) / ( 0.002549 )

      = 0.0018 M

Final step : Determine the minimum number of grams of I

moles of I = molarity of I * total volume

                 = 0.0018 M * 10.2 mL

                 = 0.01836 * 10⁻³ mol

Hence we can conclude that The minimum number of grams of I that must be present is ; 0.01836 * 10⁻³ mol

Learn more about Pb(NO₃)₂ : https://brainly.com/question/25071409

2 Which of these rates of travel is slowest
a.5 kilometres per second
b.20 kilometres per minute
c.60 kilometres per hour

Answers

Answer:

60 kilometres per hour is the slowest rate of travel

Explanation:

we convert

20 kilometer per minute into kilometer per second

it comes out 1/3 kilometer per sec

Answer:

c

Explanation:

a- 5/1km per second

b-1/3km per second

c. 1/60km per second

the larger the denominator the smaller the fraction

How many full orbitals are in phosphorus

Answers

Answer:

three half-filled orbitals

Answer:

6p

Explanation:

It can hold a total of 6

Balance the equation ​

Answers

Sorry but I can’t help you. The image is blurry and therefore the supposition is incorrect . But 12/4 equals 3

In the following acid-base reaction,
HPO42- is the
H2PO4- (aq) + NH3(aq) → HPO42- (aq) + NH4+(aq)
А
B
С
acid
conjugate
acid
conjugate
base

Answers

Taking into account the Brønsted-Lowry acid-base theory, HPO₄⁻² is conjugate base of H₂PO₄⁻.

Brønsted-Lowry acid-base theory

The Brønsted-Lowry acid-base theory (or the Brønsted-Lowry theory) identifies acids and bases based on whether the species accepts or donates protons or H⁺.

According to this theory, acids are proton donors while bases are proton acceptors.

So, reactions between acids and bases are H⁺ proton transfer reactions, causing the acid to form its conjugate base and the base to form its conjugated acid by exchanging a proton.

In other words, a conjugate base is an ion or molecule resulting from the acid that loses the proton, while a conjugate acid is an ion or molecule resulting from the base that gains the proton:

acid + base ⇄ conjugate base + conjugate acid

This case

In this case, you know:

H₂PO₄⁻ + NH₃ → HPO₄⁻² + NH₄⁺

H₂PO₄⁻ behaves like acid because donates an H⁺ proton while NH₃ behaves like base because accepts an H⁺ proton from the acid.

So, NH₄⁺ is the conjugate acid of the NH₃ and HPO₄⁻² is conjugate base of H₂PO₄⁻.

In summary, HPO₄⁻² is conjugate base of H₂PO₄⁻.

Learn more about the Brønsted-Lowry acid-base theory:

brainly.com/question/12916250

brainly.com/question/1191429

brainly.com/question/4000152

brainly.com/question/12808135

#SPJ1

Amory turns the light on in her house. Looking at the lights, she begins to wonder how the charges are moving through the bulb. Which statement best describes how the charges move through the bulb ?

Answers

The statement 'when charges pass through the bulb, light is produced' best describes how the charges move through the bulb.

What is an electrical charge?

An electrical charge is a type of positive or negative charge of the particles that move in a conductor.

At the atomic level, protons are positively charged particles, electrons are negative, and neutrons do not have a charge.

The electrical charges depend on the charge's initial time, the final time, and the net outward current.

Learn more about electrical charges here:

https://brainly.com/question/2373424

Planck's constant, h, is 6.626 x 10-34 Js. The speed of light in a vacuum, c, is 3.00 x 108 m/s. Calculate the energy of ultraviolet light with a frequency of 9.58 x 1014 Hz. A) 1.45x1048 J B) 3.92x107 J C) 6.35x10-19 J D) 6.92x10-49 J

Answers

Given the Planck's constant and the speed of light, the energy of the ultraviolet light with a frequency of 9.58×10¹⁴ Hz is 6.35×10¯¹⁹ J (Option C)

Data obtained from the question Planck's constant (h) = 6.626×10¯³⁴ JsSpeed of light (v) = 3×10⁸ m/sFrequency (f) = 9.58×10¹⁴ HzEnergy (E) =?

How to determine the energy

The energy of the ultraviolet light can be obtained as follow:

E = hf

E = 6.626×10¯³⁴ × 9.58×10¹⁴

E = 6.35×10¯¹⁹ J

Learn more about energy:

https://brainly.com/question/10703928

please help, I'm giving brainliest. Explain the term'wear acid'.​

Answers

Acids that give high concentration of H+ ions on ionisation in aqueous solution are said to be strong acids and acids which give less H+ ions on ionisation in aqueous solution are said to be weak acids.


Weak acids are acids that don't completely dissociate in solution. In other words, a weak acid is any acid that is not a strong acid. The strength of a weak acid depends on how much it dissociates: the more it dissociates, the stronger the acid.

1. How many joules of heat are necessary to melt 500 g of ice at its freezing point?

Please show work!

Answers

Answer:

40 kcal

Explanation:

Heat required to melt

1 g

of ice at

0°C

is approximately

80 cal

. This is also called latent heat of fusion of ice.

For

500 g

of ice

Q

=

500

g

×

80

cal

g

=

40000 cal = 40 kcal


If 1.76 g of an ideal gas occupy 1.0 L at standard temperature and pressure (STP), what is the molar mass of the gas?

Answers

Answer:

Explanation:

Whenever you see molar masses in gas law questions, more often than not density will be involved. This question is no different. To solve this, however, we will first need to play with the combined ideal gas equation PV=nRT to make it work for density and molar mass. The derivation is simple but for the sake of time and space, I will skip it. Hence, just take my word for it that you will end up with the equation:M=dRTPM = molar mass (g/mol)d = density (g/L)R = Ideal Gas Constant (≈0.0821atm⋅Lmol⋅K) T = Temperature (In Kelvin) P = Pressure (atm)As an aside, note that because calculations with this equation involve molar mass, this is the only variation of the ideal gas law in which the identity of the gas plays a role in your calculations. Just something to take note of. Back to the problem: Now, looking back at what we're given, we will need to make some unit conversions to ensure everything matches the dimensions required by the equation:T=35oC+273.15= 308.15 KV=300mL⋅1000mL1L= 0.300 LP=789mmHg⋅1atm760mmHg= 1.038 atmSo, we have almost everything we need to simply plug into the equation. The last thing we need is density. How do we find density? Notice we're given the mass of the sample (0.622 g). All we need to do is divide this by volume, and we have density:d=0.622g0.300L= 2.073 g/LNow, we can plug in everything. When you punch the numbers into your calculator, however, make sure you use the stored values you got from the actual conversions, and not the rounded ones. This will help you ensure accuracy.M=dRTP=(2.073)(0.0821)(308.15)1.038= 51 g/molRounded to 2 significant figuresNow if you were asked to identify which element this is based on your calculation, your best bet would probably be Vandium (molar mass 50.94 g/mol). Hope that helped :) 

Why is an enzyme in a chemical reaction like a lock and key?

A. The active site and the substrate fit perfectly together, and when they do, they unlock the chemical reaction.
B. The non-reactive site and the substrate fit perfectly together, and when they do, they unlock the chemical reaction.
C. None of these
D. The nucleoid and Golgi Apparatus fit perfectly together, and when they do, they unlock the chemical reaction.
E. The active site and the cell membrane fit perfectly together, and when they do, they unlock the chemical reaction.

Answers

Answer:

A

Explanation:

the enzyme is substrate specifix coz of this trait

state one possible mistake in a simple distillation setup and explain the significance of the mistake.

Answers

Answer:

liquid is heated. As the liquid is heated, the molecules within it gain the energy to escape the liquid phase and transition into the gas phase in the form of bubbles.

Explanation:

What properties of water are related to Oxidation?

Answers

Answer:

water has several important physical properties. Most of the physical properties of water are quite atypical e.g molar mass is 18.0151grams per mol and melting point is 0.00 degree

What are the processes that lead to the formation of sedimentary rocks? I WILL GIVE BRAINLIEST

A.weathering and erosion followed by dispersion.
B.volcanic eruptions followed by dispersion,
C. volcanic eruptions followed by compaction
D.weathering and erosion followed by compaction

Answers

Answer:

erosion, weathering, dissolution, precipitation, and lithification So,D.weathering and erosion followed by compaction

Explanation:

mark me brainliest!!

How many grams does 5 helium atoms weigh?

Answers

Answer:

4.002602

Explanation:

the average that reflects the typical ratio of natural abundances of its isotopes.

The weight of 5 helium atoms in grams is 20.01301 grams.

What are atoms?

Atoms are defined as the smallest unit into which matter can divided without the release of electrically charged particles.

It is also defined as a building block of matter and were discovered after big bang theory.  It is a fundamental piece of matter.

The weight of 1 helium atom = 4.002602 g

So, the weight of 5 helium atom = 4.002602 x 5

                                                      = 20.01301 g

Thus, the weight of 5 helium atoms in grams is 20.01301 grams.

To learn more about atoms, refer to the link below:

https://brainly.com/question/1566330

#SPJ2

write the formula for lead oxide.

Answers

Answer:

Lead(II) oxide

Explanation:

Lead(II) oxide, also called lead monoxide, is the inorganic compound with the molecular formula PbO. PbO occurs in two polymorphs: litharge having a tetragonal crystal structure, and massicot having an orthorhombic crystal structure. Modern applications for PbO are mostly in lead-based industrial glass and industrial ceramics, including computer components. It is an amphoteric oxide.[3]

IUPAC nameLead(II) oxide

Other namesLead monoxideLithargeMassicotPlumbous oxideGalena

PreparationPbO may be prepared by heating lead metal in air at approximately 600 °C (1,100 °F). At this temperature it is also the end product of oxidation of other oxides of lead in air:[4]Thermal decomposition of lead(II) nitrate or lead(II) carbonate also results in the formation of PbO:

2 Pb(NO3)2 → 2 PbO + 4 NO2 + O2PbCO3 → PbO + CO2PbO is produced on a large scale as an intermediate product in refining raw lead ores into metallic lead. The usual lead ore is galena (lead(II) sulfide). At a temperature of around 1,000 °C (1,800 °F) the sulfide is converted to the oxide:[5]

2 PbS + 3 O2 → 2 PbO + 2 SO2Metallic lead is obtained by reducing PbO with carbon monoxide at around 1,200 °C (2,200 °F):[6]

PbO + CO → Pb + CO2

pls brainlest meh

A 0.205 g sample of CaCO3 (Mr = 100.1 g/mol) is added to a flask along with 7.50 mL of 2.00 M HCl. CaCO3(aq) + 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g)Enough water is then added to make a 125.0 mL solution.

Answers

The volume of the NaOH used is calculated as 14 mL.

What is stoichiometry?

The term stoichiometry has to do with the calculation of the amount of substance in a reaction using mass - mole or mass - volume relationship.

Here;

Number of  moles of CaCO3 = 0.205 g/100.1 = 0.00205 moles

Number of  moles of HCl = 2.00 M * 7/1000 L = 0.014 moles

2 moles of HCl reacts with 1 mole of CaCO3

x moles of HCl reacts with 0.00205 moles of CaCO3

x = 0.00205 moles * 2/1 = 0.0041 moles

Hence HCl is the excess reactant

Amount of excess HCl =  0.014 moles -  0.0041 moles = 0.0099 moles

Concentration of excess HCl reacted = 0.0099 moles/125 * 10^-3 = 0.0792 M

Using;

CAVA/CBVB = NA/NB

CAVANB = CBVBNA

VB = CAVANB/CBNA

VB = 0.0792 M * 10 mL * 1/ 0.058 M

VB = 14 mL

Missing parts;

A 0.205 g sample of caco3 (mr = 100.1 g/mol) is added to a flask along with 7.50 ml of 2.00 m hcl. caco3(aq) + 2hcl(aq) → cacl2(aq) + h2o(l) + co2(g) enough water is then added to make a 125.0 ml solution. a 10.00 ml aliquot of this solution is taken and titrated with 0.058 m naoh. naoh(aq) + hcl(aq) → h2o(l) + nacl(aq) how many ml of naoh are used?

Learn more about stoichiometry: https://brainly.com/question/9743981

Choose all that apply for neap tides


Moon and sun are at right angles to the earth

Moon, sun, and earth are all in alignment

Smaller than normal range of highs and low tides

Gravity of the sun and moon work against each other

Answers

Answer:

1. Moon and sun are at right angles to the earth

2. Smaller than normal range of highs and low tides

3. Gravity of the sun and moon work against each other

73.5 mol of P4O10 contains how many moles of P ? moles of P:

Answers

Answer:

294 moles of P

Explanation:

For every 1 mol of P4O10 contains 4 mol of P

so;

73.5 mol P4O10 × 4 mol P

1 mol P4O10

= 73.5 × 4

= 294 moles of P

73.5 mol of [tex]P_4O_{10}[/tex] contains 294 moles of P. In 1 mole of [tex]P_4O_{10}[/tex], there are 4 moles of P.

The International System of Units (SI) uses the mole (abbreviated as mol) as its basic unit to measure the amount of a substance. It is mostly used in chemistry and is defined as the volume of a substance that contains exactly 12 grammes of pure carbon-12 in terms of atoms (or equivalent amounts of molecules, ions, or particles). The fundamental notion that atoms combine in whole-number ratios to form compounds serves as the foundation for the concept of the mole. It makes it simple for scientists to convert between a substance's mass and the quantity of atoms or molecules it contains.

In 1 mole of [tex]P_4O_{10}[/tex], there are 4 moles of P.

=4 × 73.5 moles of P.

= 294 moles of P

To know more about moles, here:

https://brainly.com/question/15209553

#SPJ6

Before tackling this problem, be sure you know how to find the antilog of a number using a scientific calculator.
A solution has a pH of 5.4. Write the formula you will use to calculate the [H+] and then show all your work leading to the determination of [H+].

Answers

Question:-

A solution has a pH of 5.4, the determination of [H+].

Given :- pH:- 5.4 pH = - log[H+]

To find :- concentration of H+

Answer:- Antilog(-5.4) or 4× 10-⁶

Explanation:- Formula:- pH = -log H+

Take negative to other side

-pH = log H+

multiple Antilog on both side

(Antilog and log cancel each other )

Antilog (-pH) = [ H+ ]

New Formula :- Antilog (-pH) = [+H]

Now put the values of pH in new formula

Antilog (-5.4) = [+H]

we can write -5.4 as (-6+0.6) just to solve Antilog

Antilog ( -6+0.6 ) = [+H]

Antilog (-6) × Antilog (0.6) = [+H]

[tex]Antilog (-6) = {10}^{ - 6} , \\ Antilog (0.6) = 4 [/tex]

put the value in equation

[tex] {10}^{ - 6} \times 4 = [H+] \\ 4 \times {10}^{ - 6} = [H+][/tex]

what would happen if you put vegetable oil and ice cubes into a beaker together? what would happen if you left it on the counter overnight?

Answers

Oil is hydrophobic, which means that it repels water. The ice cube will immediately begin to melt as soon as it is placed in the oil. Because oil is hydrophobic, it will not mix with the water.

If you leave the beaker overnight, you'll notice that the water sinks to the bottom and the oil floats to the top. This is because water has a higher density than oil, causing it to sink.

Hope this helps!

The text above says that many acids taste sour, but also states that oranges and tomatoes contain acid. Suggest at least one reason why these fruits don't taste sour

Answers

Fruits don't taste sour because of less hydrogen ions and less acid.

Why these fruits taste sour?

Scientists discovered that pulp from sour fruit contains more hydrogen ions, which leads sour taste while on the other hand, the sweeter fruit-like pineapples has pulp that contains fewer hydrogen ions, leading to less acidic and sweeter in taste.

So we can conclude that fruits don't taste sour because of less hydrogen ions and less acid.

Learn more about sour here: https://brainly.com/question/412863

the square below has anarea of 49ft2 what is the perimeter of the square

Answers

Answer:

28ft

Explanation:

if it's a square then each side is equal

the square root of 49 is 7

each side is 7 ft

7 ft times 4 sides is 28ft

the answer is 98 because you do 49ft2 divided by two and then that would be the answer to one side so to find the answer you multiply that by 4
Other Questions
Balance the chemical equation How does Annie escape the orphanage at the beginning of the play when she discovers "Sandy"?This is from the movie Annie Pls help meInsectivorous birds are birds that have a diet where their primary food source is insects. In the fall and winter months in the Northeast region, the temperature starts to drop and insects become scarce. What happens to the carrying capacity for insectivorous birds in winter in a northern New York forest? It stays constant, since carrying capacity is a fixed value that does not change. It quickly drops to zero once the temperature goes below freezing. It slightly fluctuates above and below the optimum level. It rapidly increases during the winter. A ball is placed in a machine that throws the ball up in the air. The table represents some points on a graph of a function that models the balls distance from the ground with respect to the time since the ball was thrown. What is the range for this situation? Which of the following were subjects of famous American artists of the mid-1800s? What subject did the Modernist era writer reflect on?The aftermath of WWIContemporary times - things todayThe romantic eraThe industrial revolution A neutral cloth and a neutral rod are rubbed together. Electrons are transferred from the rod to the cloth. What will be the final charge on the cloth? Which statement describes the most likely message of this passage?Jon's friends were planning to skip school on Friday, but Jon had afeeling they were going to get into trouble, so he went to school asusual. That day, his math teacher gave a pop quiz that Jon aced,pulling his grade up to an AA. Everyone goes through difficult times in life,B. The best friends are the ones you make in high schoolc. People fail when they are not prepared.D. Your instincts will often lead you in the right direction Math homework pls helps!! Mrs. Barnett has 5 cups of sugar. A batch of cookies uses 1/3 cup of sugar.How many batches of cookies can she make? Brainliest if correct Lesson 8: Online ShoppingOne benefit to shopping online is that the consumer can find products not available at local stores.O TrueO False (NEED ANSWER TODAY!) The dimensions of this figure are changed so that the new surface area is exactly 1/3 what it was originally.What is the new surface area?Enter your answer as a decimal in the box. I WILL GIVE 20 POINTS TO THOSE WHO ANSWER THIS QUESTION RIGHT NOOOO SCAMS AND EXPLAIN WHY THAT IS THE ANSWER Which is the graph of 4x 3y = 12? On january 1, 2021, the general ledger of tnt fireworks includes the following account balances: Dictionaries provide only a words definition. Please select the best answer from the choices provided T F100 points. Calculate the acceleration of a 2000kg single engine airlane just before take off when the thrust of the engine is 500n? hello people ~According to Robert Boyle, which of the following is not an acids property?a) turns blue Litmus redb) sour in tastec) neutralize basesd) bitter in taste When going 70 mph, it takes how many feet to stop, including reaction time evaluate f ( - 5 ) =