27.4 L of carbon dioxide would be produced at STP when 2.43 mol of HF are reacted with an excess amount of sodium carbonate.
The balanced chemical equation for the reaction between hydrofluoric acid (HF) and sodium carbonate (Na2CO3) is:
2 HF + [tex]Na_{2} CO_{3}[/tex] → 2 NaF + [tex]CO_{2}[/tex] + [tex]H_{2} O[/tex]
From the equation, we can see that for every 2 moles of HF reacted, 1 mole of CO2 is produced. Therefore, we can use stoichiometry to calculate the volume of CO2 produced from 2.43 mol of HF:
2 HF : 1 [tex]CO_{2}[/tex]
2.43 mol : x
x = (1 mol [tex]CO_{2}[/tex] / 2 mol HF) x (2.43 mol HF) = 1.215 mol [tex]CO_{2}[/tex]
At STP (standard temperature and pressure), which is 0°C and 1 atm, 1 mole of any gas occupies a volume of 22.4 L. Therefore, the volume of CO2 produced from 2.43 mol of HF at STP would be:
V = nRT/P
V = (1.215 mol) x (0.0821 Latm/mol·K) x (273 K) / (1 atm)
V = 27.4 L
What is pressure?
Pressure is defined as the force per unit area applied on a surface. It is a scalar quantity, which means it has only magnitude and no direction.
To know more about the pressure visit:
brainly.com/question/12971272
#SPJ11
A solution has an initial concentration of acid HA of 1.4 M. If the equilibrium hydronium ion concentration is 0.12 M, what is the percent ionization of the acid
To find the percent ionization of the acid, we first need to calculate the initial concentration of hydronium ions (H3O+).
HA + H2O ⇌ H3O+ + A-
Initial concentration of HA = 1.4 M
Equilibrium concentration of H3O+ = 0.12 M
Using the equilibrium constant expression for acid dissociation (Ka):
Ka = [H3O+][A-] / [HA]
Assuming the concentration of A- is negligible compared to HA, we can simplify the expression to:
Ka = [H3O+]^2 / [HA]
Rearranging the expression to solve for [H3O+], we get:
[H3O+] = sqrt(Ka x [HA])
We can look up the Ka value for HA (or calculate it if given enough information) and substitute the values:
Ka = [H3O+]^2 / [HA]
1.8 x 10^-5 = [H3O+]^2 / 1.4
[H3O+] = 0.0079 M
Now we can calculate the percent ionization:
% Ionization = ([H3O+] / [HA]) x 100
% Ionization = (0.0079 / 1.4) x 100
% Ionization = 0.56%
Therefore, the percent ionization of the acid is 0.56%.
Hi! To find the percent ionization of the acid, you'll need to use the given initial concentration of the acid HA (1.4 M) and the equilibrium hydronium ion concentration (0.12 M). Percent ionization can be calculated using the formula:
Percent Ionization = (Equilibrium Hydronium Concentration / Initial Concentration of Acid HA) × 100
Percent Ionization = (0.12 M / 1.4 M) × 100 ≈ 8.57%
The percent ionization of the acid is approximately 8.57%.
To know more ionisation of acid visit:
https://brainly.com/question/21897096
#SPJ11
A 3 cation of a certain transition metal has one electron in its outermost d subshell. Which transition metal could this be
Transition elements (also known as transition metals) are elements that have partially filled d orbitals. IUPAC defines transition elements as an element having a d subshell that is partially filled with electrons, or an element that has the ability to form stable cations with an incompletely filled d orbital.
If a 3+ cation of a certain transition metal has one electron in its outermost d subshell, then we know that the electron configuration of the neutral atom must have been [noble gas] (n-1)d1 ns2, where n is the principal quantum number. The transition metal with this electron configuration is Scandium (Sc), which has an atomic number of 21. When Sc loses three electrons to form the 3+ cation, it loses the two electrons in the ns subshell and one of the electrons from the (n-1)d subshell, leaving it with a single electron in the outermost d subshell.
To know more about Transition metal please visit
https://brainly.com/question/31803138
#SPJ11
Write the balanced equation and solubility product equation for the dissolution of potassium dichromate (K2Cr2O7).
The balanced equation for the dissolution of potassium dichromate (K₂Cr₂O₇) in water is:
K₂Cr₂O₇(s) + H₂O(l) → 2K⁺(aq) + Cr₂O₇²⁻(aq)
The solubility product equation for potassium dichromate is:
Ksp = [K⁺]²[Cr₂O₇²⁻]
The balanced equation represents the dissolution of potassium dichromate in water, where solid K₂Cr₂O₇ dissolves to form aqueous ions K⁺ and Cr₂O₇²⁻. The solubility product equation, denoted by Ksp, is an expression that relates the concentrations of ions in a saturated solution of a sparingly soluble salt to its solubility.
In this case, the solubility product equation for potassium dichromate is given by [K⁺]²[Cr₂O₇²⁻], where [K⁺] and [Cr₂O₇²⁻] represent the concentrations of potassium ions and dichromate ions, respectively, in the saturated solution.
The solubility product constant, Ksp, is a constant value that depends on the temperature and can be used to determine the solubility of potassium dichromate in water at a given temperature.
To know more about potassium dichromate refer here:
https://brainly.com/question/25968589#
#SPJ11
If 2 grams of water absorbs 20 calories of heat, the resulting water temperature change is ________.
If 2 grams of water absorbs 20 calories of heat, the resulting water temperature change is a rise of 10 degrees Celsius.
This is because water has a specific heat capacity of 1 calorie/gram/degree Celsius, meaning it takes 1 calorie of heat to raise 1 gram of water by 1 degree Celsius. Therefore, 20 calories of heat can raise 2 grams of water by 10 degrees Celsius (20 calories / 2 grams / 1 calorie/gram/degree Celsius = 10 degrees Celsius).
When 2 grams of water absorbs 20 calories of heat, the resulting water temperature change can be determined using the specific heat formula. The specific heat of water is 1 calorie/g°C. Using the formula, q = mcΔT, where q is heat in calories, m is mass in grams, c is specific heat, and ΔT is temperature change:
20 calories = (2 g)(1 cal/g°C)(ΔT)
Solving for ΔT, we get:
ΔT = 20 calories / (2 g × 1 cal/g°C) = 10°C
The resulting water temperature change is 10°C.
For more information on Heat capacity visit:
brainly.com/question/28921175
#SPJ11
Sarah and Keith are making candy for a holiday party and begin to argue about whether the melting sugar is a chemical or physical change. Keith says his teacher, Ms. Ortega, said physical changes are only a change in the state of matter, not a change in the chemicals that make up the material. Sarah argues that melting sugar is a change in the chemical makeup of the sugar because it doesn't look like sugar anymore. Who is right?
Keith is mostly correct. Melting sugar is a physical change, not a chemical change. In a physical change, the substance undergoes a change in its physical state, such as melting or freezing, without any change in its chemical composition.
The sugar molecules remain the same, just in a different physical state. So when sugar is melted, it is still sugar chemically, even though it looks different in its liquid form.
On the other hand, in a chemical change, the substance undergoes a change in its chemical composition, resulting in the formation of one or more new substances with different chemical properties. For example, when sugar is burned, it undergoes a chemical change, producing carbon dioxide and water, which have different chemical properties than sugar.
So while Sarah is right that melted sugar looks different, this change in appearance is due to a physical change rather than a chemical change.
For more question on sugar click on
https://brainly.com/question/397060
#SPJ11
Use the information below to calculate the equilibrium constant (Keq) for the following reactions. C (5) + CO2 (8) + > 2C0 (g)
At equilibrium [CO2] = 8.3 × 10° M.
[CO] = 5.4 × 10-5 M
The equilibrium constant of the reaction is 3.5 * 10^-10
What is the equilibrium constant?A quantitative indicator of the location of a chemical equilibrium in a chemical reaction is the equilibrium constant, abbreviated as K. With each concentration raised to the power of its stoichiometric coefficient, it is the ratio of the product concentrations to the reactant concentrations at equilibrium.
We know that;
The balanced reaction equation is CO2 (g) + C (s) → 2 CO (g)
Keq = [CO]^2/[CO2]
Keq = ( 5.4 × 10^-5)^2/(8.3 × 10°)
Keq = 3.5 * 10^-10
Learn more about equilibrium constant:https://brainly.com/question/30620209
#SPJ1
The pressure of a sample of argon gas was increased from 1.83 atm to 6.67 atm at constant temperature. If the final volume of the argon sample was 11.7 L, what was the initial volume of the argon sample
The initial volume of the argon sample was 42.7 L.
To solve this problem, we can use the combined gas law:
(P1V1)/T1 = (P2V2)/T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.
Since the temperature is constant, we can simplify the equation to:
P1V1 = P2V2
Plugging in the given values, we get:
P1 = 1.83 atm
V2 = 11.7 L
P2 = 6.67 atm
So, rearranging the equation to solve for V1, we get:
V1 = (P2V2)/P1 = (6.67 atm x 11.7 L)/1.83 atm = 42.7 L
to know more about combined gas law refer here:
https://brainly.com/question/30458409#
#SPJ11
A 2 cation of a certain transition metal has six electrons in its outermost d subshell. Which transition metal could this be
A 2+ cation of a certain transition metal has six electrons in its outermost d subshell. This transition metal is Iron (Fe) .
To identify the transition metal with a 2+ cation having six electrons in its outermost d subshell, we need to understand the electron configuration of transition metals and their cations.
A transition metal is an element found in the d-block of the periodic table, and these metals are characterized by having partially filled d orbitals. The outermost d subshell refers to the d orbitals of the highest energy level in the electron configuration.
In this case, we're looking for a transition metal with a 2+ cation that has six electrons in its outermost d subshell. This means the neutral atom would have eight electrons in its outermost d subshell, as the 2+ cation loses two electrons.
The transition metal that fits this description is Iron (Fe), which has an atomic number of 26. Its electron configuration is [Ar] 4s2 3d6 for the neutral atom. When it forms a 2+ cation (Fe2+), it loses the two 4s electrons, resulting in the electron configuration [Ar] 3d6 (noble gas configuration) or 1s2 2s2 2p6 3s2 3p6 3d6 (electronic configuration) . This Fe2+ cation has six electrons in its outermost d subshell, making it the transition metal you are looking for.
Learn more about transition metal : https://brainly.com/question/2879928
#SPJ11
Complete combustion of 5.00 g of a hydrocarbon produced 15.4 g of CO2 and 7.10 g of H2O. What is the empirical formula for the hydrocarbon? Insert subscripts as necessary.
The empirical formula for the hydrocarbon is CH₂.
The combustion reactions are :
C + O₂ --> CO₂
H₂ + 1/2 O₂ --> H₂O
The molar mass of CO₂ =b 44 g/mol
The Mass of Carbon, C = (15.4 g CO₂)(1mol/44g)(1 mol C/1 mol CO₂)(12 g/mol)
The Mass of Carbon, C = 4.2 g C
The Mass of H = 5 - 4.2
The Mass of H = 0.8 g
The Moles C = 4.2 / 12 = 0.35
The Moles H = 0.8 / 1 = 0.8
Dividing by the smallest one :
The Moles of C = 1
The Moles of H = 2
The empirical formula of the hydrocarbon is CH₂ with the complete combustion of the 5 g of hydrocarbon.
To learn more about empirical formula here
https://brainly.com/question/14044066
#SPJ4
While many elemental spectral lines are visible, almost all molecular lines lie in the _____ portion of the spectrum, since they are at much lower energy.
While many elemental spectral lines are visible, almost all molecular lines lie in the __infrared___ portion of the spectrum, since they are at much lower energy.
What are spectral lines ?
A spectral line is a dim or shining line in a spectrum that is otherwise uniform and continuous, caused by an excess or shortage of photons in a specific frequency range in comparison to frequencies closer to it.
Infrared waves, or infrared light, are part of the electromagnetic spectrum. People encounter Infrared waves every day; the human eye cannot see it, but humans can detect it as heat. A remote control uses light waves just beyond the visible spectrum of light—infrared light waves
Therefore, infrared portion of the spectrum is the part where molecular lines lie.
To know more about electromagnetic from the given link:
https://brainly.com/question/24319848
#SPJ4
15 g KCl is dissolved in water to generate a solution of 0.30 M. What is the volume of this solution, in liters
The volume of the solution after solving is 0.67 liters.
To find the volume of the solution, we need to use the formula:
Molarity = moles of solute / volume of solution in liters
We are given that the molarity of the solution is 0.30 M. We also know the mass of the solute (KCl) is 15 g. To find the moles of KCl, we need to divide the mass by its molar mass:
Moles of KCl = 15 g / 74.55 g/mol = 0.201 moles
Now we can rearrange the formula to solve for the volume of the solution:
Volume = moles of solute / molarity
Volume = 0.201 moles / 0.30 M = 0.67 L
Therefore, the volume of the solution is 0.67 liters.
To know more about Molarity here
https://brainly.com/question/2817451
#SPJ11
Consider a 400 mL solution of 0.10 M \ce{NaOH}NaOH. Calculate the mass of solid \ce{NaOH}NaOH required to achieve this solution. Report your rounded answer to two significant figures.
The mass of solid \ce{NaOH} required to make a 0.10 M solution of 400 mL is 1.60 grams.
To calculate the mass of solid \ce{NaOH} required, we need to use the formula:
Mass (in grams) = molarity (in mol/L) x volume (in L) x molar mass (in g/mol)
First, we need to convert the volume from milliliters to liters by dividing by 1000:
400 mL ÷ 1000 mL/L = 0.4 L
Next, we plug in the values we know into the formula:
Mass (in grams) = 0.10 mol/L x 0.4 L x 40 g/mol
Mass (in grams) = 1.60 g
Finally, we round the answer to two significant figures, giving us a final answer of 1.6 grams.
First, determine the number of moles of NaOH required. Moles = Molarity × Volume (L)
Moles = 0.10 M × (400 mL / 1000 mL/L) = 0.040 mol NaOH, 2. Next, calculate the mass of NaOH using its molar mass (22.99 g/mol for Na + 15.999 g/mol for O + 1.008 g/mol for H = 39.997 g/mol).
To know more about NaOH visit:-
https://brainly.com/question/26482748
#SPJ11
In a thermonuclear device, the pressure of 0.050 liters of gas within the bomb casing reaches 4.0 x 106 atm. When the bomb casing is destroyed by the explosion, the gas is released into the atmosphere where it reaches a pressure of 1.00 atm. What is the volume of the gas after the explosion
The volume of the gas after the explosion is 0.025 liters.
Using the formula for the ideal gas law, PV=nRT, we can solve for the number of moles of gas in the bomb casing before the explosion:
PV=nRT
(4.0 x [tex]10^6[/tex] atm)(0.050 L)=n(0.08206 L•atm/mol•K)(298 K)
n=0.000988 mol
Since the number of moles of gas is conserved, we can use PV=nRT again to solve for the volume of gas after the explosion:
PV=nRT
(1.00 atm)(V)=(0.000988 mol)(0.08206 L•atm/mol•K)(298 K)
V=0.025 L or 25.0 mL
Therefore, the volume of gas after the explosion is 0.025 liters or 25.0 milliliters.
Learn more about ideal gas law on: https://brainly.com/question/27870704
#SPJ11
If one were to construct a galvanic cell consisting of two Zn2 /Zn electrodes at two different concentrations, the more concentrated cell will be the _____. Multiple choice question. cathode anode
If one were to construct a galvanic cell consisting of two Zn2 /Zn electrodes at two different concentrations, the more concentrated cell will be the anode
In a galvanic cell, the more concentrated solution is typically associated with the anode, while the less concentrated solution is associated with the cathode. This is because, in the anode compartment, the metal electrode undergoes oxidation and releases metal ions into solution, resulting in an increase in the concentration of metal ions.
In contrast, in the cathode compartment, metal ions from the solution are reduced onto the metal electrode, resulting in a decrease in the concentration of metal ions.
Therefore, in the case of a galvanic cell consisting of two Zn2+/Zn electrodes at two different concentrations, the more concentrated cell would be associated with the anode.
Learn more about galvanic cell,
https://brainly.com/question/13031093
#SPJ4
Full Question: If one were to construct a galvanic cell consisting of two Zn2 /Zn electrodes at two different concentrations, the more concentrated cell will be the _____. Multiple choice questions.
cathode anodeA parallel collimator is used in order to localize the source of gamma emission during SPECT imaging. This is necessary because in the absence of the collimator:
In the absence of a parallel collimator during SPECT imaging, the gamma rays emitted from the source would travel in multiple directions and result in blurred and scattered images.
What is a parallel collimator?
A parallel collimator is used in order to localize the source of gamma emission during SPECT imaging. This is necessary because, in the absence of the collimator, the gamma photons emitted from different points in the source would reach the detector without any directionality, leading to blurred and indistinguishable images. The parallel collimator ensures that only gamma photons traveling parallel to the collimator's axis reach the detector, creating a clearer and more accurate representation of the gamma emission source.
The collimator is designed to only allow gamma rays that are traveling parallel to the collimator's axis to pass through, thus creating a focused beam and allowing for accurate localization of the source of gamma emission.
To know more about Parallel Collimator:
https://brainly.com/question/29036237
#SPJ11
In radioactive dating, the ratio of carbon-12 to carbon-14 is related to the time of death of the animal or plant under investigation. True or False
True. The ratio of carbon-12 to carbon-14 is used to determine the age of organic materials through radioactive dating.
What is Radiocarbon dating?In radioactive dating, the ratio of carbon-12 to carbon-14 is related to the time of death of the animal or plant under investigation. This method, known as radiocarbon dating, measures the decay of carbon-14 over time, providing an estimate of the age of the specimen. As carbon-14 decays over time, the ratio changes, allowing scientists to estimate how long it has been since the organism died.
Carbon-14 is a radioactive isotope of carbon that is constantly formed in the atmosphere by cosmic rays, and it decays over time at a known rate. When an organism dies, it stops taking in carbon-14, and the carbon-14 that was in its body begins to decay. By measuring the ratio of carbon-12 to carbon-14 in a sample and comparing it to the known ratio of carbon-12 to carbon-14 in the atmosphere, scientists can determine how long it has been since the organism died.
To know more about Radiocarbon Dating:
https://brainly.com/question/17649598
#SPJ11
What is the relative humidity for a parcel of air with 6 millibars vapor pressure and 30 millibars saturation vapor pressure
The relative humidity for a parcel of air with 6 millibars vapor pressure and 30 millibars saturation vapor pressure is 20%.
The amount of water vapor in an air-water mixture relative to the maximum amount possible is known as relative humidity (RH). Relative humidity is a ratio of the humidity of a specific water-air mixture and the saturation humidity ratio at a particular temperature.
It can be calculated using the formula:
Relative humidity = (vapor pressure / saturation vapor pressure) x 100%
Substituting the given values:
Relative humidity = (6 / 30) x 100% = 20%
Therefore, the relative humidity for this parcel of air is 20%.
To learn more about relative humidity visit:
https://brainly.com/question/30765788
#SPJ11
Question 1 - A glass of cold milk sometimes forms a coat of water on the outside of the glass (often referred to as 'sweat'). How does most of the water get there
condensation.
the hot air around the cold glass cools down into water droplets.
2. A UV spectrometer was used to measure a water sample contaminated with salicylic acid at 250 nm with a 1 cm cuvette. The absorbance was 0.320. A sample containing 0.67 ppm salicylic acid had an absorbance of 0.419. What was the concentration of salicylic acid in the first sample
The concentration of salicylic acid in the first water sample was 0.512 ppm.
We'll use the Beer-Lambert Law to find the concentration of salicylic acid in the first sample.
Step 1: Determine the molar absorptivity constant (ε) using the known sample:
A = εbc
0.419 = ε(1 cm)(0.67 ppm)
ε = 0.419 / (1 cm × 0.67 ppm) = 0.625 ppm⁻¹cm⁻¹
Step 2: Calculate the concentration of salicylic acid in the first sample:
A = εbc
0.320 = (0.625 ppm⁻¹cm⁻¹)(1 cm)(c)
c = 0.320 / (0.625 ppm⁻¹cm⁻¹ × 1 cm) = 0.512 ppm
So, the concentration of salicylic acid in the first water sample was 0.512 ppm.
To know more about salicylic acid visit:
https://brainly.com/question/14635153
#SPJ11
A sample of nitrogen gas is produced in a reaction and collected under water in a graduated cylinder. The temperature is 26.0 oC and the volume of the gas is 45.7 mL. During the experiment, the total pressure in the graduated cylinder is 757 mmHg. How many grams of nitrogen were collected
During the experiment, the total pressure in the graduated cylinder is 757 mmHg, and 0.0421 grams of nitrogen is collected.
To solve this problem, we need to use the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
First, we need to convert the temperature from Celsius to Kelvin:
T = 26.0 + 273.15 = 299.15 K
Next, we need to convert the pressure from mmHg to atm:
P = 757 mmHg / 760 mmHg/atm = 0.995 atm
Now we can rearrange the ideal gas law equation to solve for n, the number of moles of nitrogen gas:
n = PV/RT
Plugging in the given values, we get:
n = (0.995 atm)(0.0457 L)/(0.0821 L·atm/mol·K)(299.15 K) = 0.00150 moles of nitrogen gas
Finally, we can use the molar mass of nitrogen (28.01 g/mol) to convert moles to grams:
grams of nitrogen = 0.00150 moles x 28.01 g/mol = 0.0421 g
Therefore, 0.0421 grams of nitrogen were collected.
To know more about ideal gas law:
https://brainly.com/question/27870704
#SPJ11
If 200 grams of water are put into an 85.0 g Aluminum calorimeter with a 5.00 g Copper coil and are allowed to come to equilibrium at 23 oC How much heat energy is developed to raise the temperature to 34 oC
The heat energy developed to raise the temperature of the system from 23°C to 34°C is 7905 J.
The heat energy developed can be calculated using the formula:
q = (m_Al * C_Al * ΔT) + (m_Cu * C_Cu * ΔT) + (m_H2O * C_H2O * ΔT)
where q is the heat energy developed, m_Al, m_Cu, and m_H2O are the masses of aluminum, copper, and water, respectively, C_Al, C_Cu, and C_H2O are their respective specific heat capacities, and ΔT is the change in temperature.
We can assume that the calorimeter is an isolated system, so the heat gained by the water, aluminum, and copper is equal to the heat lost by the surroundings. Therefore:
q = -q_surroundings
The heat lost by the surroundings can be calculated using the formula:
q_surroundings = C_env * ΔT
where C_env is the heat capacity of the surroundings (in this case, the calorimeter and the air around it).
Substituting the values given in the problem, we get:
q = -(85.0 g * 0.900 J/g°C * (34°C - 23°C) + 5.00 g * 0.385 J/g°C * (34°C - 23°C) + 200 g * 4.184 J/g°C * (34°C - 23°C))
q = -(-7905 J)
q = 7905 J
To know more about heat energy, refer here:
https://brainly.com/question/29210982#
#SPJ11
The first small solid grains or flakes formed in our Solar System by the process of ____, the addition of material to an object an atom or molecule at a time. Group of answer choices accretion sublimation hydration condensation
The first small solid grains or flakes formed in our Solar System by the process of condensation, the addition of material to an object an atom or molecule at a time.
This process occurs when the temperature and pressure of the gas or vapor are lowered to a point where the particles can come together and form a solid. In the early Solar System, dust and gas were present in a cloud around the Sun.
As the temperature and pressure decreased with increasing distance from the Sun, the gas and dust began to condense into solid grains. These grains then stuck together through a process called accretion, forming larger and larger bodies, including the planets, moons, and asteroids.
To know more about the Solar System refer here :
https://brainly.com/question/18365761#
#SPJ11
10 . Combing your hair leads to excess electrons on the comb. How fast would you have to move the comb up and down to produce red light
Combing your hair can indeed cause excess electrons to accumulate on the comb due to friction between the comb and your hair. However, the speed at which you move the comb up and down does not determine the color of light produced.
The color of light produced depends on the energy of the electrons as they move between energy levels in an atom or molecule. When an electron moves from a higher energy level to a lower energy level, it emits a photon of light. The energy of the photon determines its wavelength and, therefore, its color.
Red light has a wavelength of approximately 620-750 nanometers. To produce red light, the electrons in a material would need to lose energy corresponding to this wavelength. However, the energy required to produce red light is much higher than the energy produced by combing your hair.
In summary, combing your hair does not produce light with a high enough energy to produce red light, regardless of how fast you move the comb up and down.
For more question on electrons click on
https://brainly.com/question/26084288
#SPJ11
If you have 226.1 mL of a 0.7850 M solution of sodium hydroxide, how many mL of a 0.850 M solution of sulfuric acid do you need in order to neutralize it
You would need 209 mL of a 0.850 M solution of sulfuric acid to neutralize 226.1 mL of a 0.7850 M solution of sodium hydroxide.
To solve this problem, we can use the equation:
Moles of acid = Moles of base
Or
M1V1 = M2V2
First, let's calculate the number of moles of sodium hydroxide:
Moles of NaOH = (volume in liters) x (molarity)
Moles of NaOH = (226.1 mL / 1000 mL/L) x (0.7850 mol/L)
Moles of NaOH = 0.1776 mol
Since sodium hydroxide is a base and sulfuric acid is an acid, we need to use the same number of moles of each to neutralize each other. Therefore, we need 0.1776 moles of sulfuric acid.
Now, we can calculate the volume of 0.850 M sulfuric acid needed:
Moles of H2SO4 = (volume in liters) x (molarity)
0.1776 mol = (volume in liters) x (0.850 mol/L)
Volume in liters = 0.209 L
To know more about neutralisation refer here:
https://brainly.com/question/23008798#
#SPJ11
How many kilojoules of heat are absorbed when 40.4 g of MgO(s) is decomposed into Mg(s) and O2(g) at constant pressure
143.7 kJ of heat are absorbed when 40.4 g of MgO(s) is decomposed into Mg(s) and [tex]O_{2}[/tex](g) at constant pressure.
The decomposition of 40.4 g of MgO(s) into Mg(s) and [tex]O_{2}[/tex](g) at constant pressure is an exothermic reaction. The balanced chemical equation for this reaction is:
2 MgO(s) → 2 Mg(s) + [tex]O_{2}[/tex](g)
According to the equation, 2 moles of MgO(s) produce 2 moles of Mg(s) and 1 mole of [tex]O_{2}[/tex](g). The molar mass of MgO is 40.3 g/mol, and the molar mass of Mg is 24.3 g/mol.
Therefore, the number of moles of MgO(s) in 40.4 g is= 40.4 g / 40.3 g/mol = 1.00 mol
This means that the reaction produces 1.00 mol of Mg(s) and 0.50 mol of [tex]O_{2}[/tex](g).
The standard enthalpy change of decomposition for MgO(s) is -143.7 kJ/mol. This means that the reaction releases 143.7 kJ of heat per mole of MgO(s) decomposed.
Therefore, the total amount of heat released when 40.4 g of MgO(s) is decomposed into Mg(s) and [tex]O_{2}[/tex](g) is= 143.7 kJ/mol x 1.00 mol = 143.7 kJ
So, 143.7 kJ of heat are absorbed when 40.4 g of MgO(s) is decomposed into Mg(s) and [tex]O_{2}[/tex](g) at constant pressure.
To know more about enthalpy visit:
https://brainly.com/question/16720480
#SPJ11
In the presence of oxygen, the three-carbon compound pyruvate can be catabolized in the citric acid cycle. First, however, the pyruvate (1) loses a carbon, which is given off as a molecule of CO2, (2) is oxidized to form a two-carbon compound called acetate, and (3) is bonded to coenzyme A. These three steps result in the formation of
The catabolism of pyruvate in the presence of oxygen results in the production of ATP and CO2.
In aerobic respiration, the process of breaking down glucose begins with glycolysis, which produces pyruvate. In the presence of oxygen, pyruvate can then be further catabolized in the citric acid cycle. However, before entering the cycle, pyruvate goes through several steps. First, it loses a carbon atom, which is released as a molecule of CO2. Second, pyruvate is oxidized, which produces a two-carbon compound called acetate. Third, acetate is bonded to coenzyme A, forming acetyl CoA. This step releases another molecule of CO2 and produces FADH2. The resulting acetyl CoA then enters the citric acid cycle, where it undergoes a series of reactions that produce NADH, FADH2, ATP, and more CO2.
learn more about aerobic respiration refer: https://brainly.com/question/12605249
#SPJ11
An unknown compound contains only C , H , and O . Combustion of 3.20 g of this compound produced 7.54 g CO2 and 2.06 g H2O . What is the empirical formula of the unknown compound? Insert subscripts as needed.
The empirical formula of the unknown compound is approximately [tex]C_4H_3O_{11/3[/tex].
To determine the empirical formula of the unknown compound, we need to find the ratio of the number of atoms of each element in the compound.
First, we need to calculate the number of moles of [tex]CO_2[/tex] and [tex]H_2O[/tex] produced in the combustion reaction:
moles of [tex]CO_2[/tex]= 7.54 g / 44.01 g/mol = 0.1715 mol
moles of [tex]H_2O[/tex]= 2.06 g / 18.02 g/mol = 0.1143 mol
Next, we need to calculate the number of moles of carbon and hydrogen in the unknown compound using the moles of [tex]CO_2[/tex]and [tex]H_2O[/tex] produced in the combustion reaction:
moles of C = moles of [tex]CO_2[/tex]= 0.1715 mol
moles of H = (moles of [tex]H_2O[/tex]) x (2 mol H / 1 mol [tex]H_2O[/tex]) = 0.2286 mol
We can then use the total mass of the unknown compound to calculate the number of moles of oxygen:
mass of unknown compound = 3.20 g - (mass of [tex]CO_2[/tex] produced + mass of [tex]H_2O[/tex] produced)
mass of unknown compound = 3.20 g - (7.54 g + 2.06 g) = -6.40 g (This negative value indicates an error in the data, as the mass of the unknown compound cannot be negative)
Therefore, there must be an error in the given data.
If we assume that the mass of the unknown compound was recorded incorrectly and should be 13.80 g (the sum of the masses of [tex]CO_2[/tex] and [tex]H_2O[/tex] produced), we can calculate the number of moles of oxygen:
mass of unknown compound = 13.80 g
moles of O = (mass of unknown compound) / (molar mass of unknown compound)
molar mass of unknown compound = (12.01 g/mol x moles of C) + (1.01 g/mol x moles of H) + (16.00 g/mol x moles of O)
molar mass of unknown compound = 12.01 g/mol + 1.01 g/mol + 16.00 g/mol = 29.02 g/mol
moles of O = (13.80 g) / (29.02 g/mol) = 0.4747 mol
Now we have the moles of each element in the compound:
moles of C = 0.1715 mol
moles of H = 0.2286 mol
moles of O = 0.4747 mol
To get the empirical formula, we need to divide each of these values by the smallest value (0.1715 mol):
moles of C = 0.1715 mol / 0.1715 mol = 1
moles of H = 0.2286 mol / 0.1715 mol = 1.333 ≈ 4/3
moles of O = 0.4747 mol / 0.1715 mol = 2.766 ≈ 11/4
Multiplying by the lowest common denominator (12) gives us the simplest whole-number ratio of atoms:
[tex]C_1H_{(4/3)}O_{(11/4)}[/tex] ≈ [tex]C_4H_3O_{11/3[/tex]
For more question on empirical formula click on
https://brainly.com/question/1603500
#SPJ11
5. The rate constant of the reaction between CO2 and OH2 in aqueous solution to give the HCO3- ion is 1.5 x 1010 M-1s-1 at 25 oC. Determine the rate constant at human body temperature (37 oC), given that the activation energy for the reaction is 38 kJ/mol.
The rate constant of the reaction between CO₂ and OH₂ in aqueous solution to give the HCO₃⁻ ion at human body temperature is 2.49 x 10¹⁰ M⁻¹ s⁻¹.
We can use the Arrhenius equation to find the rate constant at human body temperature:
k2 = A2 * exp(-Ea/RT2)
where k2 is the rate constant at human body temperature, A2 is the pre-exponential factor (the frequency factor), Ea is the activation energy, R is the gas constant, and T2 is the temperature in Kelvin (310 K for 37 oC).
We are given that:
k1 = 1.5 x 10¹⁰ M⁻¹ s⁻¹ (rate constant at 25 oC)
Ea = 38 kJ/mol
To find the pre-exponential factor at human body temperature, we need to know the activation energy dependence on temperature, which is not given.
However, we can make a reasonable assumption that the activation energy does not change significantly over the relatively small temperature range between 25 oC and 37 oC. With this assumption, we can use the pre-exponential factor at 25 oC as an approximation for A2:
A2 = A1 = k1 / exp(-Ea/RT1)
where R is the gas constant and T1 is the temperature in Kelvin (298 K for 25 oC).
Substituting the given values:
A2 = A1 = (1.5 x 10¹⁰ M⁻¹ s⁻¹) / exp(-38000 J/mol / (8.314 J/mol*K * 298 K))
= 6.47 x 10¹² M⁻¹ s⁻¹
Now we can use the Arrhenius equation to find k2:
k2 = A2 * exp(-Ea/RT2)
= (6.47 x 10¹² M⁻¹ s⁻¹) * exp(-38000 J/mol / (8.314 J/mol*K * 310 K))
= 2.49 x 10¹⁰ M⁻¹ s⁻¹
To know more about the rate constant refer here :
https://brainly.com/question/14977272#
#SPJ11
Use the table to solve for H andAS, then use those numbers to solve forAG (AG=AH - TAS)
a) Ni(s) +C/218) --> NiC|2(8)
b) CaCO3(s, calcite) --> CaO(s) + CO2(8)
A double displacement reaction occurs when two reactants swap their ions to generate two distinct products. The enthalpy of formation for Ni(s) is 0 kJ/mol, whereas the enthalpy of formation for CaCO3(s) is -1206.9 kJ/mol, according to the table.
NiC2(s) has a formation enthalpy of -51.8 kJ/mol while CaO(s) has a formation enthalpy of -635.4 kJ/mol. CO2(g) has a formation enthalpy of -393.5 kJ/mol. We may compute AG for the above reaction using the provided equation, AG=AH-TAS. First, we must compute AH and TAS.
The total of the enthalpies of production of the products less the sum of the enthalpies of formation of the reactants yields AH. TAS is determined by adding the entropies of The total of the entropies of product formation minus the sum of the entropies of reactant formation.
AH = -2080.7 kJ/mol (-51.8 + -635.4 + -393.5) - (0 + -1206.9) TAS = (-0 + 213.8) - (-0) = 213.8 J/K.mol We may compute AG for the reaction using these variables. TAS = -2080.7 - (213.8/1000) = -2081.9 kJ/mol AG = AH
Learn more about reaction at:
https://brainly.com/question/17434463
#SPJ1
Ammonium formate, NH4(HCOO), dissolves in water to give ammonium ions and formate ions. These ions then undergo an unfavorable and endothermic Brønsted acid- base reaction according to this equation:
NH4+ (aq) + HCOO– (aq) NH3 (aq) + HCOOH (aq)
Keq < 1 (at 298 K)
∆Horxn > 0
(a) (8 pts.) Calculate Keq and ∆Gorxn (at 298 K) for equation (19).
(b) (6 pts.) Qualitatively, would one expect ∆Sorxn for equation (19) to be positive or negative? Briefly justify your answer.
(c) (10 pts.) If 1.00 mol NH4(HCOO) is dissolved in 1.00 L water at 298 K, what is the pH of the solution?
(d) (7 pts.) The solution from part (c) (1.00 mol NH4(HCOO) in 1.00 L water) can be made into an effective buffer at pH = 3.00 by the addition of either NaOH or HCl. Specify whether NaOH or HCl would be required, and whether more than 0.500 or less than 0.500 mol of the reagent would be needed.
(e) (8 pts.) Consider the solution from part (c) (1.00 mol NH4(HCOO) in 1.00 L water at 298 K). For each of the changes below, circle the effect on the concentration of NH3 (aq) at equilibrium after the change is made, and briefly give the reasoning for your choice.
NH4+ (aq) + HCOO– (aq) NH3 (aq) + HCOOH (aq)
Keq < 1 (at 298 K)
∆Horxn > 0
(i) The temperature of the solution is increased to 340 K.
[NH3] increases [NH3] decreases [NH3] does not change
Explanation:
(ii) The volume of the solution is increased to 2.00 L by adding 1.00 L water.
[NH3] increases [NH3] decreases [NH3] does not change
Explanation:
To calculate Keq and ∆Gorxn, you would need additional information, such as the equilibrium concentrations of each species. The ∆Gorxn can be calculated using the equation ∆Gorxn = -RTln(Keq), where R is the gas constant and T is the temperature in Kelvin.
We would expect ∆Sorxn to be negative since the reaction results in fewer moles of gas, and there is a decrease in the overall disorder of the system.
To calculate the pH of the solution, you need to determine the concentrations of NH4+ and HCOO- ions after the dissolution of NH4(HCOO) and then use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]), where [A-] is the concentration of formate ions and [HA] is the concentration of ammonium ions.
To create an effective buffer at pH 3.00, HCl would be required to lower the pH. The exact amount needed would depend on the initial concentrations of NH4+ and HCOO- ions and their pKa values.
(i) [NH3] increases. Since the reaction is endothermic, increasing the temperature will shift the equilibrium to the right, producing more NH3.
(ii) [NH3] does not change. Adding water will dilute the solution, but the ratio of products to reactants remains constant. Therefore, the concentration of NH3 at equilibrium does not change.
To know more about equilibrium
https://brainly.com/question/517289
#SPJ11