What volume (in L) of nitrogen will be produced from the reaction of 6. 8 L of carbon monoxide?


2CO(g)+2NO(g)>N2(g)+2CO2(g)

The appropriate explanation for the non-metal is that the higher effective nuclear charge less will be the atomic radius.

Atomic radius typically decreases during a period from left to right. There are a few little outliers, such how the oxygen radius is a tiny bit bigger than the nitrogen radius. Protons are gradually added to the nucleus at the same time that electrons are gradually added to the main energy level. The enhanced positive charge of the nucleus gradually attracts these electrons closer to it. The size of the atoms shrinks as the strength of attraction between nuclei and electrons grows. Due to electron-electron repulsions that would otherwise result in the atom's size expanding, the effect becomes less pronounced as one proceeds further to the right in a period.

Learn more about nuclear charge

brainly.com/question/13664060

#SPJ4

Option (c) is correct. K atom has the largest radius as the atomic size decreases from across the period and potassium is located in the start of period 3  in the periodic table.

According to the Periodic table, atomic size decreases when going from left to right across a period. Atomic size increases when going from top to bottom down a group. If you look at elements that are located in the same group, potassium will have a larger atomic radius when compared with sodium and  chlorine. Since potassium is located at the start of period 3, potassium will have a larger atomic radius and thus the largest atomic radius of the four given atoms. Atomic radii vary in a predictable way across the periodic table. From top to bottom in a group, orbitals corresponding to higher values of the principal quantum number (n) are being added, which are on average further away from the nucleus, thus causing the size of the atom to increase.

To learn more about Atomic Radii please visit:

https://brainly.com/question/13126562

#SPJ4

14 mean in C14 is C14 has atomic mass of 14.

The radioactive carbon isotope with the longest half-life, carbon-14, whose decay enables precise dating of archaeological artifacts. Six protons and eight neutrons make up the carbon-14 nucleus, giving it an atomic mass of 14. Additionally, the isotope is employed as a tracer to monitor specific carbon atoms as they undergo chemical or biological changes.

The 14 in C14  represents the number of neutrons and protons in the nucleus of that atom or we can called it atomic mass. Carbon-14: with 6 protons and 8 neutrons, and an atomic mass of 14,

Learn more about atomic mass at https://brainly.com/question/17067547

#SPJ4

The mole fraction of C₂H₆O₂ in 12. 7 molal aqueous solution is 12.7.

In chemistry, a mole fraction is the ratio of the moles of one component in a solution or other mixture to the sum of the moles of all the components.

The ratio of the moles of any component to the sum of the moles of all the other components in the mixture is known as the mole fraction. Each gas's partial pressure in a mixture of gases is calculated by multiplying its mole fraction by its total pressure.

The number of solute molecules divided by the sum of the solute molecules and the solvent molecules is known as the mole fraction. This is equal to how many moles of solute there are in a liter of solvent, expressed in molal. If the molal equivalent C₂H₆O₂ is 12.7 this means, all that is in the solution is solute. Hence the mole fraction of C₂H₆O₂ is 12.7.

To know more about mole fraction visit:

https://brainly.com/question/1542843

#SPJ4

We burn the things that have previously grown in the sunlight-carbohydrates. Hydrogen in the carbohydrates burns to form water which is very harmless. The carbon can be recycled into many different compounds.

The carbon in this material becomes carbon monoxide  carbon dioxide, (Poisonous to us mammals) and the carbon or char which can be a nutrient into the soil. Other things that can be burning in the waste will be toxic. Plants will absorb some  worst things that humans will spill out so carelessly like: lead, cadmium, and the other toxic metals—and these toxins are very dangerous in the atmosphere

So we can indeed to alter the composition of our atmosphere by burning things. Once our planet had a carbon dioxide in the atmosphere. It was a hell-hole here. It was very hot and the atmosphere was poisonous to higher life forms. Gradually life on the planet primarily plant life has been changed this atmosphere into something clean and wonderful. But we by our careless behaviour could return it into its original poisonous luckily the huge coniferous forests clean our air of carbon and the other pollution. We are eroding one factor of this margin after the another. Glaciation, wetlands, oceans, coral reefs, wild areas—these are our safeguards and one after another they are being lost.

--The given question is incomplete, the complete question is

"Explain how the following two processes alter the percentage of carbon dioxide in the atmosphere. I. Combustion (3) II. Respiration (3)".

To know more about carbohydrates here

https://brainly.com/question/29775112

#SPJ4

In a first-order breakdown reaction, 81.8% of the molecule takes 19.0 min to break down. A compound breaks down in 7.3 minutes by 33%. The human race started to scratch right away.

A means of climbing the food chain. People snatched what they needed from those who were unsuccessful in the same race without regard for anyone else (the producers and the rest of the consumers). First order in both surfactant and acid concentrations, decomposition is a dislocation process of reaction. The process is autocatalytic since acid is produced during the degradation. Reservoir rock, on the other hand, has a sizable absorbing impact.

x = (81.8*7.3)/33 x = 19.0 min

Learn more about reaction here

https://brainly.com/question/28984750

#SPJ4

Diatomic elements are elements that exist as two atoms bound together, usually in the form of a molecule.

Diatomic molecules are molecules composed of two atoms, held together by chemical bonds. They are the simplest type of molecule, and are very common in nature. Examples of diatomic molecules include oxygen (O2), nitrogen (N2), hydrogen (H2), chlorine (Cl2), and iodine (I2). Diatomic molecules have a wide range of applications in various industries, such as medicine, chemistry, engineering, and energy.

This differs from other elemental substances because those substances contain only one atom. Diatomic elements are very common in nature and make up a large percentage of the atmosphere. They also have unique properties because of the two atoms being bound together. Diatomic elements are an important part of many everyday processes, from respiration to combustion to corrosion.

To learn more about Diatomic
https://brainly.com/question/1611262
#SPJ4

Being a highly chemically reactive metal having seven valence electrons and even a high attraction for electrons, bromine reacts quickly as well as violently with alkali metals, therefore is rarely found in nature pure.

Despite being a potent oxidizer, it is difficult to break down under typical circumstances. Fluorine was the strongest active halogen, followed by chlorine, bromine, as well as iodine.

Since bromine has a higher atomic radius over chlorine, it is much less reactive. Compared to chlorine, bromine does not hold electrons as tightly. This is supported by the fact that chlorine contains fewer electron shells, which causes the electrons to connect nearer to the nucleus.

Due to its lower reactivity, the bromine radical is so much more selective for such 2° radical. Cl• is much less picky and less selective since it is less stable as well as more reactive.

To know more about  chemically reactive

https://brainly.com/question/9621716

#SPJ4

The Sun is a close second in terms of object radii. It would be so spherical if shrunk to the size of a beach ball that the distance between its widest and narrowest diameters would be significantly smaller than the width of a human hair.

Our world is greatly influenced by the sun, which controls the weather, ocean currents, seasons, and climate as well as enabling plant life through photosynthesis. Life on Earth would not live without the heat and light provided by the sun.

Because they developed and collapsed under the force of their own gravity, the Sun and the majority of other big objects in space, including stars, planets, and large moons, are spherical. When our Solar System first formed, it was a massive, whirling cloud of gas and dust that gradually shrank due to gravity.

Thus, The Sun is a close second in terms of object radii.

To learn more about the sun, follow the link;

https://brainly.com/question/17376727

#SPJ1

Answer:

Water is a compound because it is made up of water molecules. There is no such thing as water atoms. Water molecules are made of hydrogen and oxygen atoms, in the definite proportion of two hydrogens for one oxygen.

Explanation:

The difference between a molecule and a compound is this:

A molecule consists of two or more atoms joined by a chemical bond.

A compound consists of two or more different atoms joined by chemical bonds.

Water (H2O) is both a molecule and a compound.

Hydrogen gas (H2) and oxygen gas (O2) are molecules but because the atoms of which they are made are not different, they do not qualify as compounds.

The amount, in grams of Pb that would be required to make 119 g of [tex]H_2O[/tex] will be 685.17 grams.

The balanced equation of the reaction would be as follows:

[tex]Pb+PbO_2+2H_2SO_4--- > 2PbSO_4+2H_2O[/tex]

The mole ratio of Pb to [tex]H_2O[/tex] is 1:2.

Recall that, mole = mass/molar mass.

Molar mass of [tex]H_2O[/tex] = 18 g/mol

Mole of 119 g of [tex]H_2O[/tex] = 119/18 = 6.61 mol

From the established mole ratio, the equivalent mole of Pb that would be required will be:

1/2 x 6.61 = 3.31 mol

Mass = mole x molar mass

The molar mass of Pb is 207 g/mol

Mass of 3.31 mol Pb = 3.31 x 207

                                  = 685.17 grams

In other words, the amount of Pb that would be required to make 119 g of [tex]H_2O[/tex] according to the illustrated reaction will be 685.17 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

On adding 200g hydrochloric acid to excess calcium carbonate, the percent yield of carbon dioxide is equal to 82.84%.

200g of HCl was added to an excess amount of calcium carbonate to produce 100g of carbon dioxide along with water and calcium chloride. The reaction is written as:

CaCO₃ + 2HCl → H₂O + CO₂ + CaCl₂

Since calcium carbonate is excess, two moles of hydrochloric acid gives rise to one mole of carbon dioxide.

To calculate the percent yield, we can use stoichiometry,

The molar mass of hydrochloric acid = 36.46 g/mol

The molar mass of carbon dioxide = 44.01 g/mol

To calculate theoretical yield,

200g HCl/1 × 1 mole HCl/36.46g HCl × 1 mol CO₂ /2mol HCl × 44.01 mol CO₂/ 1 mole CO₂

= 120.707 g

To calculate the percent yield,

The amount of CO₂ produced = 100g

Dividing 100 by the theoretical yield

=  100/120.707 = 0.8284

Now multiplying the value by 100

= 0.8284 × 100 = 82.84 %

To learn more about percent yield here

https://brainly.com/question/2506978

#SPJ4

moles of HCl are reacting is [tex]135\times10^{-3}[/tex]

In the International System of Units, the mole is used to measure material quantity. The number of a substance's elementary entities that are present in an object or sample depends on the amount of that substance. A solute's molar concentration is used to represent how much of a solute there is per unit volume of a solution or how much of a chemical species there is in a solution.

Magnesium reacts with hydrochloric acid to generate a salt of magnesium chloride and release hydrogen gas.

Mg(s) +HCl(aq) [tex]\rightarrow[/tex] [tex]MgCl_{2}[/tex](aq)+[tex]H_{2}[/tex](g)

molarity =[tex]\frac{moles of solute}{volume of solution \:(l)}[/tex]

molarity of Mg is 3.0M volume of solution is 45ml

now, 3M=[tex]\frac{moles of solute}{45\times 10^{-3} \:(l)}[/tex]

moles of mg = 135 millimoles.

now according to the reaction by using stoichiometry

moles of Mg = moles of HCl

moles of HCl =135 millimoles =[tex]135\times10^{-3}[/tex]

Learn more about moles.

brainly.com/question/26416088

#SPJ4

The empirical formula of the compound is BF3.

The empirical formula of a compound is the simplest whole-number ratio of atoms that represents the compound's composition. To determine the empirical formula of a compound, we need to determine the number of moles of each element present and then simplify the ratio of moles to the smallest whole-number ratio.

First, we can use the percentages of boron and fluorine to find the number of grams of each element present in 100 grams of the compound:

15.94 g boron / 100 g compound

84.06 g fluorine / 100 g compound

Next, we can convert the number of grams of each element to moles using the molar masses of boron and fluorine:

15.94 g B / (10.81 g/mol) = 1.48 mol B

84.06 g F / (18.99 g/mol) = 4.44 mol F

To find the empirical formula, we divide the number of moles of each element by the lowest number of moles:

1.48 mol B / 1.48 mol B = 1.00

4.44 mol F / 1.48 mol B = 3.00

So the empirical formula of the compound is BF3.

It's important to note that this is the empirical formula, and the actual formula of the compound could be a multiple of this depending on the chemical structure of the compound.

Learn more about Empirical Formula here: https://brainly.com/question/11588623

#SPJ4

Answer:

8.3 × 10⁴kg

Explanation:

Solution in the diagram

The definition of the meter in biology is that the meter scale is used to measure the length. it is first unit of the international system of the units.

The meter is the first unit of the length in the international system of the units. currently the definition of the meter is : The meter can be defined as the length of the path that is travelled by the light in the vacuum during the time interval of 1 / 2999792458 second. The symbol of the meter is m.

The meter scale is used to measure the length or the distance between the two points.

To learn more about meter here

https://brainly.com/question/17687457

#SPJ4

To solve this we must be knowing each and every concept related to  landslides. Therefore, the given process describe the landslides process.

Slope collapses are essentially natural calamities that occur in a variety of locations across the world. Slope failures, often known as landslides, define a wide range of mechanisms that produce the outward or downward of slope-forming materials such as rock, soil, or landfills.

The down-slope movement of material on Earth is called a slope failure. It is the failure of the slope resulting in transport of debris downhill by sliding, rolling, falling, or slumping. This is an example of slope failure called landslides.

Therefore, the given process describe the landslides process.

To learn more about landslides, here:

https://brainly.com/question/13151615

#SPJ1

Nitrate NO 2 It is inappropriate to use one of the following ions' names and formulas.

Herbicides, explosives, defoliants, paper, leather, dyes, matches, and inks are all made from it. It's also used to make cosmetics and medications. An inorganic salt of sodium with the counter-ion chlorate is known as sodium chlorate. It serves as both a herbicide and an oxidizing agent for bleaching paper.

Chlorate, an anion, can enter drinking water through a number of different causes, such as the use of hypochlorite or chlorine dioxide as disinfectants, the oxidation of hypochlorite or chlorite by ozone, and pesticide runoff or paper mill discharges that contaminate the source water.

To know more about chlorate visit:

https://brainly.com/question/5923839

#SPJ4

The margin error of the population is  0.058. Option B

We know that the margin of error has to do with the allowance that has been given to accommodate the mistakes that can occur in a study. Let us note that the mistakes in the study may arise from a number of factors. One of the factors that could lead to the existence of error in the results of a study is a mistake when we reread off the values that we obtain from the study.

As such, we have;

M = √[p(1 - p)/n]

where:

p = sample proportion

n = sample size

We are given;

p = 44/70 = 0.6286

n = 70

Thus;

M = √[0.6286(1 - 0.6286)/70]

M = √0.003335172

M ≈ 0.058

This is now the margin of the error that we have in the study that has been done here.

Learn more about margin of error:https://brainly.com/question/29101642

#SPJ1

Thermal energy is transformed into kinetic energy that is, the energy of a moving object in this example, the moving piston by the engine. So, the sign of heat is negative and work done is negative.

A complicated device known as a combustion engine consumes fuel to produce thermal energy, which is subsequently used to drive tasks. In a car, the engine is responsible for generating the kinetic energy needed to turn the wheels. An internal combustion engine is the type of combustion engine used in automobiles. Internal-combustion engines are those found in gasoline or diesel-powered automobiles. Such an engine obtains its power from the heat produced during the combustion of the working fluids that have not yet reacted, the oxidizer-fuel mixture. As the heat is released to convert into the kinetic energy the sign of heat is negative and the sign of work done by the internal combustion of vehicles is negative.

To learn more about combustion click here https://brainly.com/question/14335621

#SPJ4

In a typical IR spectrum, wavenumber name describes the units shown on the x-axis.

According to common understanding, IR includes wavelengths between the notional red edge of the visible spectrum, which is at a frequency of 430 THz, and 1 millimeter (300 GHz) (although the longer IR wavelengths are often designated rather as terahertz radiation ).The spatial frequency of a wave is measured in cycles per unit distance (common wavenumber) or radians per unit distance, and is also known as the wavenumber or repetency[1] (angular wavenumber).It is comparable to temporal frequency, which is determined by the quantity of radians or wave cycles per unit of time (ordinary frequency) (angular frequency).

Learn more about wavenumber Refer:brainly.com/question/14941879

#SPJ4

Chemical Indicator refers to a substance that changes color when there is a certain concentration of hydrogen ions in a solution.

Chemical indicators are any substances that provide a clear indication—typically a change in color—of the presence or absence of a certain chemical species, like an acid or an alkali, in a solution. One such chemical is methyl yellow, which gives an alkaline solution a yellow color. When introduced to acidic or alkaline solutions, substances are considered indicators when their color changes. There are several indicators that are frequently used in laboratories, including litmus, phenolphthalein, and methyl orange. Litmus paper: It turns red in acidic solutions and blue in basic ones. Methyl orange: This chemical exhibits a red color in an acidic solution and a yellow color in a basic solution.

Learn more about Chemical indicators

brainly.com/question/13748767

#SPJ4

0.384 moles of nitrogen atoms are inhales by the person in an average breath of air.

Avogadro constant is the number of molecules present in 1 mole of gas or a chemical compound. It is used to specify the atomic mass of a certain number of molecules in a substance or chemical compound or gas, in grams. Theses molecules may be atoms, neutron, proton, electron, etc. One mole of a substance contains 6.023 × 10²³ Molecules. In other words the atomic mass of a substance is the weight of 6.023 × 10²³ molecules.

So 2.31 × 10²³ atoms of nitrogen = (2.31 × 10²³)/(6.023 × 10²³)

= 0.384 moles

To know more about nitrogen, here

https://brainly.com/question/16711904

#SPJ4

The reaction that has been shown in the table above is a double replacement reaction, and each compound has the same set of ions. Option D

Another word that we can use for reaction is what we call a chemical change. We know that a chemical change is the kind of change that will lead to the formation of a new product. It is an irreversible process as we can not be able to get back the reactants again.

We should note that there are various types of reactions. In a single  replacement reaction, you would notice that there is only one substance that reacts and causes a change while in the double replacement reaction, the anions that are in the compounds that underwent the reaction would just exchange anion partners and we would have two ionic products.

Learn more about reactions:https://brainly.com/question/28984750

#SPJ1

Cool in cold or lukewarm water for 20 minutes.

This should be done as soon as possible after an injury. Never use ice, ice water, cream, or greasy substances like butter on the burn. Be careful to keep the airways open when treating burn victims. Associated smoke inhalation injuries are very common, especially when the patient is burned in an enclosed space such as a room or building. Even people who have been burned outdoors can inhale smoke. Stop the burning process as soon as possible. Remove all clothing and jewelry near the burned area.

Learn more about inhalation injuries visit:

brainly.com/question/28271345

#SPJ4

Carbohydrates, is 60% of what your food made up of and it is composed of carbon, hydrogen and oxygen.

Carbohydrates are known to be the group of organic compounds that are an important source of energy for the body. They are composed of carbon, hydrogen and oxygen and are classified as simple or complex depending on their chemical structure. Monosaccharides, also called monosaccharides, include glucose, fructose, and galactose, and are found in foods such as fruit, table sugar, and honey. Complex carbohydrates, also called polysaccharides, contain starches and fibers and are found in foods such as grains, legumes, and vegetables. Carbohydrates play an important role in providing energy for the body, maintaining proper brain and nervous system function, and supporting tissue growth and repair.

To know more about Carbohydrates, visit:

https://brainly.com/question/29775112

#SPJ4

The electron rule is broken in the diagram is: (c) Pauli Exclusion Principle.

An electron is a subatomic particle with a negative electric charge. It is found in atoms, and is the main component of electricity. Electrons are incredibly small, measuring only a fraction of a nanometer, and they are around 2000 times lighter than the smallest atom. Electrons are governed by the laws of quantum mechanics and they are move around the nucleus of an atom in discrete orbits. Electrons are responsible for chemical bonding between atoms, and they are essential for the formation of molecules.

To learn more about electron

https://brainly.com/question/25674345

#SPJ1

Answer:

a

Explanation:

boiling point of 111ºC and hexane, with a boiling point of 69ºC, is 42ºC, making these two substances most easily separated

Federal Marshals will receive trafficking penalty for attempting smuggling.

Human trafficking, also referred to as trafficking in persons, is a crime that entails forcing or coercing a person to perform work or services or engage in sexual acts for monetary gain. The exertion of pressure may be covert or obvious, physical or psychological.

A conviction for keeping someone in servitude carries potential fines and a maximum 20-year prison sentence in a federal facility. The maximum penalty is life in prison if there is a death as a result of the violation or if it involved kidnapping, sexual assault, or other aggravating circumstances.

To know more about trafficking penalty visit:

https://brainly.com/question/14449916

#SPJ1

Nitrous acid HNO_2 would be more suitable for use in a solution buffered at pH = 7.0.The other ion needed to make the buffer would be the conjugate base of the acid, which in this case would be the nitrite ion NO_2^-.

A, The Ka value is an indication of the strength of an acid; the lower the Ka value, the weaker the acid. Therefore, the hypochlorous acid HClO has a weaker acidity than nitrous acid HNO_2 and would be less suitable for use in a solution buffered at pH = 7.0.

B, Buffers work by maintaining a certain pH by providing a source of a weak acid and its conjugate base. Therefore, the other ion needed to make the buffer is the conjugate base of the acid, which in this case is the nitrite ion NO_2^-.

learn more about nitrous acid here

https://brainly.com/question/17055219

#SPJ4