What is the maximum speed with which a 1200- kg car can round a turn of radius 90.0 m on a flat road if the coefficient of static friction between tires and road is 0.55?

Answers

Answer 1

The maximum speed with which a 1200- kg car can make a turn is 22.02 m/s.

Maximum speed of the car

v(max) = √μrg

where;

μ is coefficient of frictionr is radius of the curved roadg is acceleration due to gravity

v(max) = √(0.55 x 90 x 9.8)

v(max) = 22.02 m/s

Thus, the maximum speed with which a 1200- kg car can make a turn is 22.02 m/s.

Learn more about maximum speed here: https://brainly.com/question/20595261

#SPJ1


Related Questions

Blythe and Geoff compete in a 1.00-km race. Blythe's strategy is to run the first 600 m of the race at a constant speed of 4.10 m/s, and then accelerate to her maximum speed of 7.30 m/s, which takes her 1.00 min, and then finish the race at that speed. Geoff decides to accelerate to his maximum speed of 8.30 m/s at the start of the race and to maintain that speed throughout the rest of the race. It takes Geoff 3.00 min to reach his maximum speed. Assume all accelerations are constant.

Required:
a. Calculate the time of Blythe's run.
b. Calculate the time of Geoff s run.

Answers

Answer:

Explanation:

1.00 km = 1000 m .

Blythe's run : -------

Time taken to run 600 m speed

= distance / speed

T₁= 600 / 4.10 = 146.34 s

Next time T₂ = 1 min = 60 s

acceleration of Blythe

a = (7.30 - 4.10) / 60 = .053 m /s²

displacement during acceleration

= ut + 1/2 at²

= 4.10 x 60 + .5 x .053 x 60²

= 246 + 95.4

= 341.4 m

Rest of the distance to be covered = 1000 - ( 600 + 341.4 )

= 58.9 m

Time taken to cover this distance

T₃= 58.9 / 7.3 = 8.06 s

Total time = T₁ + T₂ + T₃ = 214.4 s

Geoff s run : ---------

initial acceleration during first 3 min

= (8.3 - 0 ) / (3 x 60 )

= .046 m /s²

displacement

s = ut + 1/2 a t²

= 0 + .5 x .046 x ( 3 x 60 )²

= 745.2 m

Rest of the distance of race

= 1000 - 745.2 = 254.8 m

This distance is covered at speed of 8.3 m/s

time taken to cover this distance

T₂ = 254.8 / 8.3

= 30.7 s

Total time taken to complete the race

= 180 + 30.7

= 210.7 s .

Using a simply pulley/rope system, a crewman on an Arctic expedition is trying to lower a 6.17-kg crate to the bottom of a steep ravine of height 23.8 meters. The 55.6-kg crewman is walking along holding the rope, being careful to lower the crate at a constant speed of 1.50 m/s. Unfortunately, when the crate reaches a point 13.2 meters above the ground, the crewman steps on a slick patch of ice and slips. The crate immediately accelerates toward the ground, dragging the hapless crewman across the ice and toward the edge of the cliff.

If we assume the ice is perfectly slick (that is, no friction between the crewman and the ice once he slips and falls down), at what speed will the crate hit the ground? Assume also that the rope is long enough to allow the crate to hit the ground before the crewman slides over the side of the cliff. At what speed will the crewman hit the bottom of the ravine?

Answers

Answer:

a. Vc = 5.06 m/s

b. Vp =  22.18 m/s

Explanation:

The acceleration of the pulley-mass system is as follows:

a = [tex]\frac{mg}{m + M}[/tex]

Solving for acceleration, we get:  

a = [tex]\frac{6.17 *9.8}{6.17 + 55.6}[/tex]

a = 0.97

So, for the part a:

Calculate the velocity of the crewman by using the following equation:

Vc = [tex]\sqrt{Vi^{2} + 2ay}[/tex]

Substituting the values into the equation, we get:

Vc = [tex]\sqrt{1.50^{2} + 2*0.97*13.2}[/tex]

Vc = 5.06 m/s

Now, for part b:

Calculate the final velocity of the pulley by using the following expression:

Vp = [tex]\sqrt{Vi^{2} +2gy }[/tex]

Just plugging in the values.

Vp = [tex]\sqrt{5.06^{2} +2*9.8*23.8 }[/tex]

Vp =  22.18 m/s

 

While talking to a friend, a construction worker momentarily set her cell phone down on one end of an iron rail of length 7.50 m. At that moment, a second worker dropped a wrench so that it hit the other end of the rail. The person on the phone detected two pulses of sound, one that traveled through the air and a longitudinal wave that traveled through the rail. (Assume the speed of sound in iron is 5,950 m/s and the speed of sound in air is 343 m/s).
A) Which pulse reaches the cell phone first?
B) Find the separation in time (in s) between the arrivals of the two pulses.

Answers

Answer:

A)

The impulse that reaches the cell phone first is the Longitudinal wave

B)  0.0206  seconds

Explanation:

length of Iron rail = 7.5 m

speed of sound in Iron = 5950 m/s

speed of sound in Air = 343 m/s

A) Determine which pulse reaches the cell phone first

The impulse that reaches the cell phone first is the Longitudinal wave

 Time for longitudinal pulse to be detected =  7.5 / 5950 = 0.00126 s

  Time for pulse through air to be detected = 7.5 / 343 = 0.02186  s

B) separation in time between the arrivals of the two pulses

   ΔT = 0.02186 - 0.00126  = 0.0206  seconds

What are two things that happen to the sugars that are made by the plant during photosynthesis?
I

Answers

Answer:

The sugars produced by photosynthesis can be stored, transported throughout the tree, and converted into energy which is used to power all cellular processes. Respiration occurs when glucose (sugar produced during photosynthesis) combines with oxygen to produce useable cellular energy.

Explanation:

I think this is correct lol.

Visualizing yourself crossing the finish line and how'd you'd feel is
a method of blocking unwanted feelings
a way to cope with stress
utilizing positive values
O a method of influence on others

Answers

Answer:

I believe you put how you think you'd feel it's that simple

Answer:

utilizing positive values

Explanation:

The cylinder with piston locked in place is immersed in a mixture of ice and water and allowed to come to thermal equilibrium withthe mixture. The piston is then moved inward very slowly, that thegas is always in thermal equilibrium with the ice-water mixture,what happens to the following(increase, decrease, same)?

a. volume of gas
b. temperature of gas
c. internal energy of gas,
d. pressure of gas

Answers

Answer:

a. volume of gas:  (decreases)

b. temperature of gas:  (same)

c. internal energy of gas: (same)

d. pressure of gas: (increases)

Explanation:

We have a gas (let's suppose that is ideal) in a piston with a fixed volume V.

Then we put in a reservoir at 0°C (the mixture of water and ice)

remember that the state equation for an ideal gas is:

P*V = n*R*T

and:

U = c*n*R*T

where:

P = pressure

V = volume

n = number of mols

R = constant

c = constant

T = temperature.

Now, we have equilibrium at T = 0°C, then we can assume that T is also a constant.

Then in the equation:

P*V = n*R*T

all the terms in the left side are constants.

P*V = constant

And knowing that:

U = c*n*R*T

then:

n*R*T = U/c

We can replace it in the other equation to get:

P*V = U/c = constant.

Now, the piston is (slowly) moving inwards, then:

a) Volume of the gas: as the piston moves inwards, the volume where the gas can be is smaller, then the volume of the gas decreases.

b) temperature of the gas: we know that the gas is a thermal equilibrium with the mixture (this happens because we are in a slow process) then the temperature of the gas does not change.

c) Internal energy of the gas:

we have:

P*V = n*R*T = constant

and:

P*V = U/c = constant.

Then:

U = c*Constant

This means that the internal energy does not change.

d) Pressure of the gas:

Here we can use the relation:

P*V = constant

then:

P = (constant)/V

Now, if V decreases, the denominator in that equation will be smaller. We know that if we decrease the value of the denominator, the value of the quotient increases.

And the quotient is equal to P.

Then if the volume decreases, we will see that the pressure increases.

difine precision and accuracy​

Answers

-precision refers to the closeness of two or more measurements to each other.

-Accuracy refers to the closeness of a measured value to a standard or known value.
the accuracy (as in binary or decimal places) with which a number can be represented usually expressed in terms of the number of computer words available for representation.

degree of conformity of a measure to a standard or a true value

Please help I’m almost done with exam

Which phrase is the best description of what a telescope does?
O A. Causes objects to grow larger
B. Transports equipment to space
C. Converts solar energy to electricity
D. Detects electromagnethwaves

Answers

Answer:

D

Explanation:

Telescopes detect electromagnetic waves from space and it travels back to the telescope lens in order for you to see.

Answer:

D

Explanation:

Ap ex science exam lol

Plzz answer this question correctly

Answers

Answer:

by reducing friction.....

A football quarterback runs 15.0 m straight down the playing field in 2.30 s. He is then hit and pushed 3.00 m straight backward in 1.74 s. He breaks the tackle and runs straight forward another 28.0 m in 5.20 s.
Calculate his average velocity (in m/s) for each of the three intervals. (Assume the quarterback's initial direction is positive. Indicate the direction with the sign of your answer.)

Answers

Answer:

6.52 m/s

1.72 m/s

5.38 m/s

Explanation:

this question requires us to find the average velocity.

1. velocity in straight down direction:

velocity = distance/time

= 15.0/2.30

= 6.52 m/s

2. velocity in straight backward direction:

velocity = distance/time

= 3.00 /1.74

= 1.72m/s

3. velocity in straight forward direction

velocity = distance/time

= 28.0/5.20

= 5.38 m/s

these are the his velocities for each if the intervals.

thank you!

Part of understanding the physical effects on Mars, we must understand
first that our laws of Physics on Earth must apply in the same manner that it
is on Mars. Discuss the Three Laws of Motion as set forth by Isaac Newton.
Following this, write out the mathematical description of these laws. Provide
three examples to con rm your results, and include free body diagrams

Answers

Answer:

so easy add the subtract then multiplay the add

Explanation:

1: Give one word answer.

The bouncing back of the light rays after hitting a smooth surface _____

Answers

Answer:

RThe answer is Reflection....

The electric field 30cm from a van de Graaff generator is measured to be 28,300N/C. What is the charge of the van de Graaf?

Answers

Answer:

14

Explanation:

EWAN KO LANG DIN BASTA YAN ALAM KO

Greatest to least order

Answers

Answer:

Explanation:

FBEDAC

What force acts in the opposite direction to
an object moving through the air?

Answers

Air resitances also know as drag is a force that is caused by air the force acts in oppsite directions to an object moving through the air ..

HOPE THIS HELP YOU ..

YALL PLEASE HELP I BARELY HAVE TIME
Which of the following is not a property of light?
Light travels in a straight line.
Light travels through empty space.
Light moves in a compressional wave.
All options are true

Answers

Answer:

All of then are true

I need brainliest so I can rank up

Explanation:

Answer:

I think all options are true is the right answer

Explanation:

Mark me the brainliest plzzz

An object's mass has a greater influence on its kinetic energy than does its velocity. True or False?

Answers

Answer: I think false

Explanation:The velocity at which an object is sent moving and the mass of the object both play a hand in the level of kinetic energy that object produces. Mass and kinetic energy have a positive relationship, which means that as mass increases, kinetic energy increases, if all other factors are held constant.

A plastic cup weighing 100 g floats on water so that 1/4 of the volume of the cup is immersed in water. How much volume of oil can be poured into the glass to keep it still sinking? The density of the oil is 900 kg / m​

Answers

Answer:

Any floating object displaces a volume of water equal in weight to the object's MASS. ... If you place water and an ice cube in a cup so that the cup is entirely full to the ... If you take a one pound bottle of water and freeze it, it will still weigh one ... Fresh, liquid water has a density of 1 gram per cubic centimeter (1g = 1cm^3, ...

Do you ever have a sensation of loneliness?

Answers

Answer:

nope

Explanation:

sige bigyan kitang Happy pills

You throw a small rock straight up from the edge of a highway bridge that crosses a river. The rock passes you on its way down, 5.00 s after it was thrown. What is the speed of the rock just before it reaches the water 22.0 m below the point where the rock left your hand? Ignore air resistance.

Answers

Answer:

Explanation:

for vertical movement , time to reach the top = time to reach the hand = 2.5 s

v = u - gt

At the top , v = 0 , time t = 2.5 s

0 = u - g x 2.5

u = 2.5 x 9.8 = 24.5 m /s

velocity of throw = 24.5 m /s

So , when it passes the hand on its way down , it will have velocity equal to 24.5 m /s and it will accelerate downwards . Let its velocity down by 22 m be v

v² = u² + 2 g s

= 24.5² + 2 x 9.8 x 22

= 600.25 + 431.2

= 1031.45

v = 32.11 m /s .

10. A change in
indicates the acceleration of an object
O A the time of travel
OB the distance from a given point
O c displacement
OD velocity

Answers

Answer:

d velocity will be the one according to me

There is a parallel plate capacitor. Both plates are 4x2 cm and are 10 cm apart. The top plate has surface charge density of 10C/m^2 and the bottom plate has a surface charge density of -10C/m^2. Find the total charge on each plate. Find the electric field at the point exactly midway between the plates. Find the electric potential between the two plates. If an electron was in the middle the two plates, find the force on it.

Answers

Answer:

1) The total charge of the top plate is 0.008 C

b) The total charge of the bottom plate is -0.008 C

2) The electric field at the point exactly midway between the plates is 0

3) The electric field between plates is approximately 1.1294 × 10¹² N/C

4) The force on an electron in the middle of the two plates is approximately 1.807 × 10⁻⁷ N

Explanation:

The given parameters of the parallel plate capacitor are;

The dimensions of the plates = 4 × 2 cm

The distance between the plates = 10 cm

The surface charge density of the top plate, σ₁ = 10 C/m²

The surface charge density of the bottom plate, σ₂ = -10 C/m²

The surface area, A = 0.04 m × 0.02 m = 0.0008 m²

1) The total charge of the top plate, Q = σ₁ × A = 0.0008 m² × 10 C/m² = 0.008 C

b) The total charge of the bottom plate, Q = σ₂ × A = 0.0008 m² × -10 C/m² = -0.008 C

2) The electrical field at the point exactly midway between the plates is given as follows;

[tex]V_{tot} = V_{q1} + V_{q2}[/tex]

[tex]V_q = \dfrac{k \cdot q}{r}[/tex]

Therefore, we have;

The distance to the midpoint between the two plates = 10 cm/2 = 5 cm = 0.05 m

[tex]V_{tot} = \dfrac{k \cdot q}{0.05} + \dfrac{k \cdot (-q)}{0.05} = \dfrac{k \cdot q}{0.05} - \dfrac{k \cdot q}{0.05} = 0[/tex]

The electric field at the point exactly midway between the plates, [tex]V_{tot}[/tex] = 0

3) The electric field, 'E', between plates is given as follows;

[tex]E =\dfrac{\sigma }{\epsilon_0 } = \dfrac{10 \ C/m^2}{8.854 \times 10^{-12} \ C^2/(N\cdot m^2)} \approx 1.1294 \times 10^{12}\ N/C[/tex]

E ≈ 1.1294 × 10¹² N/C

The electric field between plates, E ≈ 1.1294 × 10¹² N/C

4) The force on an electron in the middle of the two plates

The charge on an electron, e = -1.6 × 10⁻¹⁹ C

The force on an electron in the middle of the two plates, [tex]F_e[/tex] = E × e

∴ [tex]F_e[/tex] = 1.1294 × 10¹² N/C ×  -1.6 × 10⁻¹⁹ C ≈ 1.807 × 10⁻⁷ N

The force on an electron in the middle of the two plates, [tex]F_e[/tex] ≈ 1.807 × 10⁻⁷ N

1) In order to get work done, what must be present?
a) Energy
b) Oxygen

please help

Answers

Answer:

In order to accomplish work on an object there must be a force exerted on the object and it must move in the direction of the force

Explanation:

option a is right

Cars A and B are racing each other along the same straight road in the following manner: Car A has a head start and is a distance DA beyond the starting line at t=0. The starting line is at x=0. Car A travels at a constant speed vA. Car B starts at the starting line but has a better engine than Car A, and thus Car B travels at a constant speed vB, which is greater than vA?

Answers

The question is incomplete. Here is the complete question.

Cars A nad B are racing each other along the same straight road in the following manner: Car A has a head start and is a distance [tex]D_{A}[/tex] beyond the starting line at t = 0. The starting line is at x = 0. Car A travels at a constant speed [tex]v_{A}[/tex]. Car B starts at the starting line but has a better engine than Car A and thus Car B travels at a constant speed [tex]v_{B}[/tex], which is greater than [tex]v_{A}[/tex].

Part A: How long after Car B started the race will Car B catch up with Car A? Express the time in terms of given quantities.

Part B: How far from Car B's starting line will the cars be when Car B passes Car A? Express your answer in terms of known quantities.

Answer: Part A: [tex]t=\frac{D_{A}}{v_{B}-v_{A}}[/tex]

              Part B: [tex]x_{B}=\frac{v_{B}D_{A}}{v_{B}-v_{A}}[/tex]

Explanation: First, let's write an equation of motion for each car.

Both cars travels with constant speed. So, they are an uniform rectilinear motion and its position equation is of the form:

[tex]x=x_{0}+vt[/tex]

where

[tex]x_{0}[/tex] is initial position

v is velocity

t is time

Car A started the race at a distance. So at t = 0, initial position is [tex]D_{A}[/tex].

The equation will be:

[tex]x_{A}=D_{A}+v_{A}t[/tex]

Car B started at the starting line. So, its equation is

[tex]x_{B}=v_{B}t[/tex]

Part A: When they meet, both car are at "the same position":

[tex]D_{A}+v_{A}t=v_{B}t[/tex]

[tex]v_{B}t-v_{A}t=D_{A}[/tex]

[tex]t(v_{B}-v_{A})=D_{A}[/tex]

[tex]t=\frac{D_{A}}{v_{B}-v_{A}}[/tex]

Car B meet with Car A after [tex]t=\frac{D_{A}}{v_{B}-v_{A}}[/tex] units of time.

Part B: With the meeting time, we can determine the position they will be:

[tex]x_{B}=v_{B}(\frac{D_{A}}{v_{B}-v_{A}} )[/tex]

[tex]x_{B}=\frac{v_{B}D_{A}}{v_{B}-v_{A}}[/tex]

Since Car B started at the starting line, the distance Car B will be when it passes Car A is [tex]x_{B}=\frac{v_{B}D_{A}}{v_{B}-v_{A}}[/tex] units of distance.

The distance traveled by the car A and car B  should be equal to the as they meet at the same position.

The time car B will catch the car A after is,

[tex]\dfrac{D_A}{v_B-v_A}[/tex]

How to calculate the distance traveled by body?

The distance is the product of the speed of the body and the time taken to travel the distance.

Given information-

Car A has a head start and is a distance DA beyond the starting line at,

[tex]t=0[/tex]

Car A travels at a constant speed [tex]v_A[/tex].

Car B travels at a constant speed [tex]v_B[/tex].

The distance is the product of the speed of the body and the time taken to travel the distance.

The position equation from the motion for car A can be given as,

[tex]x_A=v_At+D_A[/tex]

The position equation from the motion for car B can be given as,

[tex]x_B=v_Bt[/tex]

The distance traveled by the car A and car B  should be equal to the as they meet at the same position. Thus,

[tex]x_A=x_B[/tex]

Put the values,

[tex]v_At+D_A=v_Bt\\v_At-v_Bt=-D_A\\t(v_B-v_A)=D_A\\t=\dfrac{D_A}{v_B-v_A}[/tex]

Hence the time car B will catch the car A after is,

[tex]\dfrac{D_A}{v_B-v_A}[/tex]

Learn more about the speed of the object here;

https://brainly.com/question/4931057

[RM.03H]Which of these is the most likely impact of extensive mining of uranium to produce energy?

land becomes unfit for food production
rainfall decreases because of harmful gases
greenhouse gases are absorbed by the mineral
radiations are better absorbed by the atmosphere

Answers

Answer:

land becomes unfit for food production

A cylinder is filled with a liquid of density d upto a height h. If the beaker is at rest ,then the mean pressure on the wall is?​

Answers

Answer:

h over 2 dg

Explanation:

brainliest!!!!!!!

an object of 5kg is attached to a rope of length 4m is Rotating horizontally at 8m/s horizontally 20m above the ground if the rope is suddenly cut what is the horizontal distance travelled by the object? Please guys help

Answers

Answer:

16 meters

Explanation:

When the rope is suddenly cut the object moving tangent at the circle. In that moment the gravity act in the object making it falls.

First we need to find how much time de object take to reach at the ground.

VERTICALLY EQUATION:[tex]h(t)=h-v*t-\frac{g}{2} t^{2} \\[/tex]

g=acceleration of gravity=10m/s²

v= vertical velocity =0m/s

h=vertical altitude =20m

We will find t such that h(t)=0

[tex]0=20-5t^{2} \\\\5t^{2} =20\\\\t^{2} =4\\\\t=2s[/tex]

HORIZONTALLY EQUATION:*horizontally we do not have acceleration[tex]D(t)=v*t[/tex]

v=horizontal velocity

D(t=2) is the horizontal distancetravelled by the object:

[tex]D(2)=8*2\\\\D(2)=16m[/tex]

In which direction does Earth’s gravitational force act?
a. opposite the direction of motion
b. downward toward the center of Earth
c. upward away from the center of Earth
d. in the direction of motion

Answers

B downward
Earth's gravitational force acts in what direction? Earth's gravity acts downward toward the center of Earth. Gravity causes objects to accelerate downward, whereas air resistance acts in the direction opposite to the motion and reduces acceleration.

Even though Alice visits the wishing well frequently and always tosses in a coin for good luck, none of her wishes have come true. As a result, she decides to change her strategy and make a more emphatic statement by throwing the coin downward into the well. If the water is 5.43 m below the point of release and she hears the splash 0.85 seconds later, determine the initial speed at which she threw the coin. (Take the speed of sound to be 343 m/s.)

Answers

Answer:

Explanation:

Total time taken = 0.85 s .

Time taken by sound to travel 5.43 m + time taken by coin to fall by 5.43 m = .85

5.43 / 343 + time taken by coin to fall by 5.43 m = .85

time taken by coin to fall by 5.43 m = .85 - 5.43/343 = .834 s

Let the initial velocity of throw of coin = u

displacement of coin s  = 5.43 m

time take to fall t =  .834 s

s = ut + 1/2 gt²

5.43 = u x .834 + .5 x 9.8 x .834²

5.43 = u x .834 + 3.41

u x .834 = 2.02

u = 2.42 m /s .

If a car's speed triples, how does the momentum and kinetic energy of the

car change? Answer in form (momentum change, kinetic energy change)

Answers

Answer: When the car speed triples, momentum also triples but Kinetic energy increases 9 times or by 9 fold.

Explanation:

The momentum of a car (an object) is

p= mv

where

m is =the mass of the object( in this case car)

v is its= velocity

While the kinetic energy is is given by the formulae

K=1/2mv²

To determine how momentum and kinetic energy of the  car changes when the speed of the object triples, We have that the new velocity,

v¹= 3v

So that  the momentum  change becomes

p¹=mv¹=m (3v)= 3mv

mv=p

therefore p¹= 3p

we can see that the momentum also triples.

And the kinetic energy change  becomes

K¹=1/2m(v¹)²= 1/2m (3v)²

= 1/2m9v²= 1/2 x m x 9 x v²=9 x1/2mv²

1/2mv²=K

K¹= Kinetic energy = 9k

but Kinetic energy increases 9 times

Other Questions
I am doing a follow up case on the Dadeville shooting in alabama. The suspects were charged with 4 counts of reckless murder. More charges will be filed. Going based off of the 4 counts what is the recommended sentencing based on alabama state law? In the following RLC circuit, R = 5 Ohms and the two cut-off frequencies, 1 and 2 are 237.81 and 262.81 radians per second, respectively. Vs = 50 cos t Volts, Question 1 Determine the resonant frequency, _0, in radians per second. Round to the nearest whole number. Question 2 Determine the bandwidth, B, in radians per second. Round to the nearest whole number. Simple biology question help please! which of the following statements best describes the socialization hypothesis for explaining job segregation? If all observations have a residual of 0, which of the following statements is true?Choose the correct answer below.A. The correlation coefficient will be 0.B. The R-square will be 1.C. The slope of the regression line will be 1.D. An error was made in the calculation as a residual cannot be zero. If families have characteristic facial expressions, shared even by family members who are blind from birth, it is MOST logical to say that facial expressions of emotion are universal. B facial expressions of emotion are inherited. C emotions are subject to cultural expectations. D emotions originate in the limbic system. according to the text, the united states as it is today lives up to alexis de tocquevilles observation of the united states as a place of extraordinary equality. True or false? true or false the well known cia triad of security objectives are the only three security goals information security is concerned with. the hippocampus appears to play a special role in memory for On the planet of Mercury, 4-year-olds average 2. 8 hours a day unsupervised. Most of the unsupervised children live in rural areas, considered safe. Suppose that the standard deviation is 1. 6 hours and the amount of time spent alone is normally distributed. We randomly survey one Mercurian 4-year-old living in a rural area. We are interested in the amount of time X the child spends alone per day. (Source: San Jose Mercury News) Round all answers to 4 decimal places where possible. a. What is the distribution of X? X ~ N(,)b. Find the probability that the child spends less than 0. 8 hours per day unsupervised. c. What percent of the children spend over 4. 1 hours per day unsupervised. % (Round to 2 decimal places)d. 70% of all children spend at least how many hours per day unsupervised? hours If each answer could be 2-5 sentences that'd be perfect!1.How might our solar system be different if ice in the protoplanetary disk froze at 250 K instead of 150 K?2.Why were Pluto and Ceres demoted from planethood?3.Aside from its liquid water, describe two characteristics of Earth that contribute to its habitability Which of the following provides the correct mathematical expression to calculate the pH of a solution made by mixing 10.0ml of 1.00MHCl and 11.0mL of 1.00MNaOH at 25C?A.pH=log(0.0010)=3.00B.pH=14.00+log(0.001)=11.00C.pH=14.00+log(0.0010/0.0210)=12.68D.pH=14.00+log(0.0010/0.0110)=12.96 the solubility of calcium iodate in water is 0.22 g/100 ml. calculate the solubility product constant for calcium iodate, Consider the following class declaration.Assume that the following declaration has been made.Person student = new Person ("Thomas", 1995);Which of the following statements is the most appropriate for changing the name of student from "Thomas" to "Tom" ?A student = new Person ("Tom", 1995);B student.myName = "Tom";C student.getName ("Tom");D student.setName ("Tom");E Person.setName ("Tom"); Hallie hires an accountant to prepare and file her personal income tax return this year.Which type of agent relationship does this represent?SubagentAgency coupled with an interestGeneral agentSpecial agent How can you calculate the peak altitude of the sun in the sky?A. By using the observer's latitude and the sun's declination.B. By using the observer's longitude at the ecliptic.C. By using the observer's altitude at the ecliptic.D. By using the observer's latitude and the sun's right ascension. Question 1To begin your comparison, read this short article comparing the US and UK health care systems. Use thechart.BIUX X 10ptCriteriaDoctors paid byLed or run byPositive aspectPositive aspectNegative aspectNegative aspectUS System UK SystemV AVAISpace used (includes formatting): 1046 / 15000EEEEEE Air expands isentropically from an insulated cylinder from 200C and 400 kPa abs to 20 kPa abs Find T2 in C a) 24 b) -28 c) -51 d) -72 e) -93 HELP ANSWER HOWLE PAGE PLS the federal bank increases zion banks reserve rate. this fed tactic is designed to heat up the economy. (True or False)