The atmospheric pressure on earth is 1 atm. This pressure is equivalent to the mercuric pressure of 760 mmHg. The atmospheric pressure on the surface of Venus is 9200 kpa which is equivalent to 69017 mmHg.
What is atmospheric pressure?Pressure is the force acting per unit area. In the atmosphere, the gaseous particles and dust exerts a pressure in the atmosphere. The atmospheric pressure depends on the temperature.
There are various units for pressure. Normally the atmospheric pressure is expressed in atm unit. The mmHg pressure is based on the raise in mercuric level with respect to increase in pressure.
1 mmHg = 0.0013133 atm
hence, 760 mmHg = 1 atm
On the surface of Venus, the pressure is 9200 kilopascal.
1 mmHg = 0.133 KPa
then 9200 KPa = 9200/0.133 = 69017 mmHg pressure.
Therefore, height of mercuric column will be 69017 mm in Venus surface.
Find more on atmospheric pressure:
https://brainly.com/question/1393320
#SPJ1
As a warehouse worker pushes a crate across a concrete floor, the force he
applies is not perfectly horizontal, as shown in the image below. If the
coefficient of kinetic friction between the crate and concrete floor is 0.5, what
is the net force on the crate?
Pushing Force
350 N
Weight
460 N
OA. 95 N
OB. 115 N
O C. 130 N
OD. 145 N
10⁰
-Friction Force
2
The crate will be under a net force of 95 N. Resolving the force in the x-direction yields the net force on the crate: F = 300 cos 10° - N F= 295.44-196.45, F= 95.
How do you calculate the frictional force?The resistive force of friction (Fr) divided by the normal or perpendicular force (N) pushing the objects together yields the coefficient of friction (fr), which is a numerical value. The formula fr = Fr/N serves as a representation of it.
What are the friction laws?The friction of a moving item is inversely proportional to the normal force and runs perpendicular to it. The type of surface the thing comes into touch with determines the amount of friction it experiences. As long as there is a point of contact, friction does not depend on the area of contact.
To know more about friction here;
brainly.com/question/13000653
#SPJ1
A longitudinal wave is shown. An illustration of a horizontal spring. In the spring are areas where the rings are closer together and areas where the rings are further apart. The area where the rings are closer together is labeled A, the area where the rings are further apart is labeled B, the height of the spring is labeled C and the distance between adjacent areas where the rings are closer together is labeled D. Which label identifies a rarefaction? A B C D
Answer:
Explanation:
The label that identifies a rarefaction in a longitudinal wave is B.
In a longitudinal wave, such as a wave in a spring, a rarefaction is an area where the particles of the medium are farther apart than they are in the rest of the wave. This is in contrast to a compression, which is an area where the particles of the medium are closer together than they are in the rest of the wave.
In the given illustration, the area where the rings are further apart is labeled B, so B is the label that identifies a rarefaction. The area where the rings are closer together, labeled A, is a compression. The height of the spring, labeled C, does not correspond to a rarefaction or a compression, and the distance between adjacent areas where the rings are closer together, labeled D, is not related to the concept of rarefactions or compressions.
Answer:
wavelength - C
rarefractions - B
compressions - A
Explanation:
correct on EDGE 2023
If a vehicle goes from 15.0 km/h to 28.0 km/h in 4.60 seconds, how far will it have traveled?
Answer:
To find the distance the vehicle traveled, you will need to find the average speed of the vehicle over the 4.60 seconds and multiply that by the time traveled.
The average speed of the vehicle can be found by adding the initial speed and the final speed, and then dividing by 2: (15.0 + 28.0) / 2 = 21.5 km/h.
The distance traveled can be found by multiplying the average speed by the time traveled: 21.5 km/h * 4.60 s = 98.7 km.
So, the vehicle will have traveled 98.7 km.
Explanation:
Please help with this
A unit vector must have length equal to 1. By calculating the length of (1, 1), we discover that (12 + 12) = 2 = 1.414, which is not the same as 1, is the length.
How do you write unit vector notation?I,J notation is a way to describe a vector. In Cartesian coordinates, a unit vector is a vector with length 1. The unit vectors along the axis are denoted by the letters I and j, respectively. The form ai+bj an I + b j can be used to represent any two-dimensional vector.Numerous operations, including addition, subtraction, and vector multiplication, can be carried out with the aid of the vector form of representation. A=xi+yj+zk is the vector form of the cartesian representation of the three points (x, y, and z). A is equal to x I y j, and z k.Vy = Vyj, Vz = Vz k, and Vx = Vxî. V = Vx + Vy + Vz = Vxî+ Vyj+ Vz k is the result of applying the triangle rule to vector addition twice. The unit vector notation is used in this situation.To learn more about vector refer to:
https://brainly.com/question/30212035
#SPJ1
One of the largest organ pipes is in the auditorium organ in the convention hall in
Atlantic City, New Jersey. The pipe is 38.6 ft long and produces a sound with a
wavelength of about 10.6 m. If the speed of sound in air is 346 m/s, what is the
frequency of this sound?
Among electromagnetic waves, UV rays are most dangerous because exposure to these radiation cause serious problems in living organism. Thus the frequency of sound wave is 0.135 s⁻¹.
What is electromagnetic wave?Electromagnetic wave is a wave which contain two component one is electric component and other is magnetic component. The electric and magnetic component are perpendicular to each other. There are so many wave that comes under electromagnetic wave like infrared wave , radio wave, light wave.
There is a relation between frequency of wave, and wavelength of wave
Mathematically,
speed=distance/time
where,
ν=frequency of light
c is speed of light that is 3×10⁸m/s
λ is the wavelength of light=4.5x10² nm= 10.6 m
Substituting all the values
346 m/s =11.76m÷ t
t=0.033= 0.135 s⁻¹
Thus the frequency of sound wave is 0.135 s⁻¹.
To know more about electromagnetic wave, here:
https://brainly.com/question/12289372
#SPJ1
Explain why a solid has a definite shape
and volume.
6. How does the arrangement of atoms in most
solids differ from the arrangement of atoms in
a liquid?
According to the given statement Atoms in solids vibrate motionless, whereas atoms in fluid move.
Where are atoms found?Everything, that's correct. Matter includes all liquids, solids, sand, plants, animals, and clouds. The building components of matter are called atoms. All stuff is made up of numerous atoms, like how this house is built of many bricks. Because they are not living entities, atoms don't require food, water, or oxygen, and they can't procreate.
Can you kill an atom?The law of energy conservation states that matter cannot be generated or destroyed. As a result, an atom could be destroyed or divided into smaller particles. The electron, proton, the neutron are the three fundamental particles that make up an atom.
To know more about Atom visit:
https://brainly.com/question/12231872
#SPJ1
Anna litic and Noah formula how place a 1.50 kg brick on a wooden board and incline the board at 34.4* above the horziontal. The coefficient of friction between the brick and the board is 0.350. determine the force of gravity, parallel component of gravity and the perpendicular component of gravity. Please also find net force and acceleration
The force due to gravity here is 14.7 N. The net force acting on the brick is 9.5 N and the acceleration of the brick is then 6.3 m/s².
What is frictional force?Friction is a resistive force which opposes the motion of an object. The product of normal force by gravity and frictional coefficient gives the frictional force.
Given that, mass = 1.50 Kg
force by gravity = mg = 1.50 × 9.8 m/s² = 14.7 N
parallel component = 14.7 cos 34.4 = 12.12 N
perpendicular component = 14.7 sin 34.4 = 8.30 N
The frictional force = mg × coefficient of friction
= 14.7 × 0.35 = 5.14 N
then net force = 14.7 - 5.14 = 9.5 N
Acceleration of the brick = net force/mass
a = 9.5 N/1.50 Kg = 6.30 m/s²
Hence, acceleration on the brick is 6.30 m/s².
Find more on friction:
https://brainly.com/question/13000653
#SPJ1
Please give me the answer to this question
There is not enough information to determine the work done. Option iv
What is the work done?Let us note that we say that there is work done when the force that has been applied moves a distance in the direction of the force. In this case, we have been told that there is the combination of the works that is done by the object.
Now, we also have to note that we do not have other information to determine the work done such as the magnetic feild and the mass of the electron. All these are lacking in the question.
Learn more about work done:https://brainly.com/question/13662169
#SPJ1
Gravity on earth is 9.8
Jaydens mass is 50 kilograms his weight is
A horse trots past you and then a fencepost that is 36m away from you. It takes the horse 11.0 sec to make this trot. What is the average velocity of the horse?
As the horse trots a fencepost that is 36m away from you in 11.0 second, the average velocity of the horse is 3.27 m/s.
What is velocity?The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.
A horse trots past you and then a fencepost that is 36m away from you.
Time taken to make this trot = 11.0 second.
Hence, the average velocity of the horse is = total distance travelled/time interval
= 36/11.0 m/s
= 3.27 m/s.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ1
Which ideas did you include in your answer? Check all that apply.
Scientists use relative and absolute dating to determine age of rocks.
Scientists can organize the rocks layers based on their age on the geologic time scale.
The type of rocks and the fossils in the rock layers tell scientists about Earth’s history.
By contrasting a fossil with related rocks and fossils of known ages, relative dating can estimate the fossil's age.
By utilising radiometric dating to track the isotope decay inside the fossil or, more frequently, the rocks it is linked with, absolute dating may pinpoint an object's exact age.
What are the benefits of using relative and absolute dating of rocks?It is possible to identify whether one artefact, fossil, or stratigraphic layer is older than another using relative dating, which does not provide particular dates.
Absolute dating techniques offer more precise dates and times of origin, such as a range in age in years.
learn more about fossil refer
https://brainly.com/question/19083813
#SPJ1
what change do you need to make when comparing objects going upward against gravity versus downward with gravity?
A. Different amount of time in motion
B. Different length of displacement
C. Different sign + or - on the acceleration
D. Different changes to velocity
If an object is working against gravity, that means gravity must have the opposite sign of the object (this is why we see objects slow down at their peak height and return to us if we throw them in the air!). If the object is working with gravity, though, they must both be moving in the same direction, therefore gravitational acceleration would be the same sign as the velocity (positive or negative depending on how you define your axes).
Therefore, your answer should be C. Different sign + or - on the acceleration.
I hope this helps!
If an object is moving and the sum of all the vector forces on it is zero, then the object will:
accelerate at a constant rate
come to rest
move at a constant speed
none of the previous
If an object is moving and the sum of all the vector forces on it is zero, then the object will move at a constant speed. The correct option is c.
What is vector force?A force's magnitude and direction are both represented by a force vector. This contrasts with expressing the force's magnitude alone, which is known as a scalar quantity.
Typically, a vector is represented by an arrow that points in the direction of the force and has a length proportionate to the strength of the force.
Therefore, the correct option is c, move at a constant speed.
To learn more about vector force, refer to the link:
https://brainly.com/question/13492374
#SPJ1
a defender running away from a goalkeeper at 5m/s is hit in the back by the goal kick. the ball stops dead and the players speed increases to 5.5m/s if the ball had a mass of 500g and the player mass is 70k how fast was the ball moving?
The goal kick strikes a defender racing at 5 m/s away from a goalkeeper in the back. The ball was moving at a speed of 70 m/s if it weighed 500g and the player's mass was 70k.
Why does the goalie in a football game pull his hands back after holding the ball that has been shot towards the goal?The goalkeeper extends the amount of time he has to hold the ball by pulling his hands back. He lessens the force (rate of change of momentum) the football exerts on him by lengthening the time.
Write the formula for momentum and define it.A vector quantity, momentum. A body's momentum is equal to P=m.v if it is travelling at a speed of v while having mass m. P=mv describes the magnitude of the momentum. Because momentum is a function of mass and velocity, its unit is the product of those two quantities.
By using conservation of momentum,
Initial momentum = Final momentum
(5 x 70) + (v x 0.5) = (5.5 x 70) + (0 x 0.5)
350 + 0.5v = 385 + 0
0.5v = 35
v = 70 m/s
To learn more about Momentum visit:
brainly.com/question/24030570
#SPJ1
5.33 A constant force F= (4.70-379, 2.09) N. acts on an object of mass 180 kg, causing a displacement of that object by F= (4.25, 3.69-245) m What is the total work done by this force
The total work done by this force is 28.9-1457.86 N m.
What is total work?Total work is the sum of all the energy expended in completing a job or task. It is the amount of effort and energy expended to accomplish a goal or complete a task. Total work can be calculated by adding up all of the individual components of the job or task, such as time, effort, and materials.
The total work done by this force can be calculated using the formula W = F * Δx, where F is the force vector, and Δx is the displacement vector. In this case, the total work done is:
W = (4.70-379, 2.09) * (4.25, 3.69-245) = (19.9-944.81, 8.00-513.05) N m
Therefore, the total work done is 28.9-1457.86 N m.
To learn more about total work
https://brainly.com/question/25573309
#SPJ1
A 6 kg bowling ball is lifted 1.2 m into a storage rack. The acceleration of gravity is 9.8 m/s². Calculate the increase in the ball's potential energy. Answer in units of J.
Answer:
70.56 J
Explanation:
The increase in potential energy of the ball can be calculated using the formula:
PE = mgh
where:
PE is the increase in potential energy
m is the mass of the ball (6 kg)
g is the acceleration of gravity (9.8 m/s²)
h is the height the ball is lifted (1.2 m)
Substituting in the values, we get:
PE = (6 kg)(9.8 m/s²)(1.2 m)
This simplifies to:
PE = 70.56 J
So the increase in the ball's potential energy is 70.56 J.
Two equally charged pith ball are 3cm apart in air and repel each other with a force of 4X105N - Comput the charge on each bali-
TheThe charge applied on each ball is 2 X 10∧-9 C.
Define force ?
An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
The pitch balls repent each other with force
F= 4 X 10^-5N
Let the charge on each ball be Q.
4 X 10^-5= k(Q)(Q) / (3 X 10^-2)^2
Q^2= 4*10^-5X 9*10^-4 / 9*10^9
Q^2 = 4 X 10^-18
Q= √4 X 10^-18
Q = 2 X 10^-9 C.
Therefore, the charge on each ball is 2X10^-9C.
To know more about Force visit:
brainly.com/question/13191643
#SPZ1
Each ball has been charged with 2 X 10⁹ C. When a product is held in electrostatic energy, its properties referred to as electric discharge allows it to feel force.
What is force?A force can compel a heavily armored item to increase or modify overall velocity. A push or a pull is a simple and effective method to explain force. That's because a force has both magnitude and direction it is a dimensionless number.
The pitch balls repent each other with force
F = 4 X 10⁻⁵N
4 X 10⁻⁵ = k(Q)(Q) / (3 X 10⁻²)²
⇒ Q² = 4 × 10⁻⁵ X 9 × 10⁻⁴ / 9 × 10⁹
⇒ Q² = 4 X 10⁻¹⁸
⇒ Q = √4 X 10⁻¹⁸
⇒ Q = 2 X 10⁻⁹ C.
Therefore, the charge on each ball is 2 X 10⁻⁹C.
To know more about Force visit :-
https://brainly.com/question/13191643
#SPJ1
What conditions determine which process occurs in a cell?
The conditions that determine which process occurs in a cell are largely based on the environment and the needs of the cell.
What is cell?A cell is the basic unit of life. It is the smallest unit of an organism that is capable of independent functioning. Cells are composed of a variety of molecules, including proteins, lipids, carbohydrates, and nucleic acids. Cells are able to carry out functions such as energy production, metabolism, growth and division, movement, and communication.
These conditions include the availability of nutrients, the presence or absence of specific signaling molecules, the amount of oxygen, and the temperature. In addition, the genetic makeup of the cell and its response to internal and external cues can also determine which processes occur.
To learn more about cell
https://brainly.com/question/3717876
#SPJ1
a stage light uses a white lamp wgat color of light will be seen when
a yellow filter is used
an orange filter is used
Answer:
Explanation:
When a yellow filter is used, the stage light will appear yellow because the filter absorbs all colors of light except for yellow, which it allows through. When an orange filter is used, the stage light will appear orange for the same reason.
It is important to note that the color of the lamp itself will not change, but the light that is seen by the observer will appear to be the color of the filter due to the absorption and transmission properties of the filte
A 42 kg cart is pushed forward with a total force of 225 Newtons. What is the work done if the cart moves forward 12 meters
Important Formulas:
[tex]w=Fd[/tex]
work(measured in joules) = force(measured in newtons) * distance(measured in meters)
__________________________________________________________
Given:
[tex]m=42kg[/tex]
[tex]F=225N[/tex]
[tex]d=12m[/tex]
[tex]w=Fd[/tex]
__________________________________________________________
Finding work:
[tex]w=Fd[/tex]
[tex]w=225\times12[/tex]
__________________________________________________________
[tex]\fbox{w = 2700 Joules}[/tex]
What will be the linear expansion of a piece of wrought iron 8 feet long if it’s temp is raised 70 degrees F?
The linear expansion of the wrought iron is 0.0038 feet.
What is the linear expansion of the wrought iron?
The linear expansion of the wrought iron is the increase in length of the wrought iron due to change or increase in temperature.
Mathematically, the formula for the linear expansion of metals is given as;
ΔL = αLΔθ
where;
ΔL is the linear expansion of the metalα is the coefficient of thermal expansion of the metalL is the original length of the metalΔθ is the change in temperature of the metalThe coefficient of thermal expansion of wrought iron = 0.0000067 / ⁰F
The linear expansion of the wrought iron is calculated as follows;
ΔL = αLΔθ
ΔL = ( 0.0000067/ ⁰F x 8 ft x 70 ⁰F )
ΔL = 0.0038 ft
Thus, the linear expansion of the wrought iron is a function of the increase in temperature of the iron and the original length of the iron.
Learn more about linear expansion here: https://brainly.com/question/14325928
#SPJ1
Three point charges are arranged at the corners of a square of side L as shown in Fig. What is the potential at the fourth corner (point A), taking V=0 at a great distance?
Thus the electric field at the fourth corner of the square of side L is E4 = kQ.[2/a² + 1/a√2].
What is Electric field strength?Electric field strength is a quantitative expression of the intensity of an electric field in an electric circuit at a particular location and time. The standard unit of the electric field strength is the volt per meter (V/m or V·m⁻¹). An electric field strength of 1 V/m represents a potential difference of about 1V between the two points which are separated by 1 meter distance.
We are given that:
Number of point charges = 3
Here, we shall use the superposition principle to calculate the net electric field at the fourth point, so
E4 = E1 + E2 + E3
E4 = kQ/a² + kQ/√(2a²) + kQ/a²
E4 = kQ [1/a² + 1/√(2a²) + 1/a²]
E4 = kQ [2/a² + 1/a√2]Thus the electric field at the fourth corner is E4 = kQ [2/a² + 1/a√2].
Learn more about Charge here:
https://brainly.com/question/3412043
#SPJ1
acceleration to move 650N with mass of 100 kg
A sign which weighs 38.3 N is supported symmetrically by two cables which make an angle of 1.0 degrees with the horziontal. A single cable will pull upward on the sign with a force of how may Newtons?
The single cable will pull upward on the sign with a force of 38.3 N.
What is single cable?Single cable is a type of cable that is composed of a single electrical conductor. It is most commonly used in low voltage applications such as wiring for computers and domestic appliances. Single cable is typically insulated with rubber, PVC or other insulating materials. The insulator protects the conductor from short circuits and other electrical hazards.
This is because the sign is supported symmetrically by two cables, which means that the total downward force on the sign is equal to the total upward force. Since the two cables make an angle of 1.0 degrees with the horizontal, the total downward force on the sign is equal to the combined weight of the sign (38.3 N) and the two cables pulling down on it. Therefore, the single cable must pull up with a force of 38.3 N in order to keep the sign in equilibrium.
To learn more about single cable
https://brainly.com/question/29015552
#SPJ1
A 68.2 kg high jumper leaves the ground with a vertical velocity of 8 m/s. How high can he jump? The acceleration of gravity is 9.8 m/s². Answer in units of m.
How long does it take the Earth to spin on its axis once?
Explanation:
it takes the earth 24 hours to spin on it's axis once
*NOTE* The answers in this question are
NOT realistic. Don't second guess yourself!
A pitcher claims he can throw a 0.151 kg
baseball with as much momentum as a 3.22 g bullet moving with a speed of 1.90312 x
10° m/s.
What must be its speed if the pitcher's claim is valid?
Answer in units of m/s. Answer in units of ms.
004 (part 2 of 3) 1.0 points
What is the kinetic energy of the bullet?
Answer in units of J. Answer in units of J.
005 (part 3 of 3) 1.0 points
What is the kinetic energy of the ball?
Answer in units of J. Answer in units of J
Answer: It is not clear what is the power of 10 in the speed of the bullet but here is a general procedure for the question.
Explanation:
[tex]P_{bullet}=(3.22*10^{-3}kg)*(10^{?}m/s)\\P_{baseball}=P_{bullet}\\[/tex]
Therefore we can write:
[tex](0.151*10^{-3} kg)*v_{baseball}=(3.22*10^{-3}kg)*(10^{?}m/s)[/tex]
From this using the relationship:
[tex]v_{baseball}=\frac{(3.22*10^{-3}kg)*(10^?m/s)}{0.151*10^{-3}kg}[/tex]
I cannot give a precise answer since power of then for speed of the bullet is not clear. But using the above equation you can reach the answer. General form of the equation is therefore:
[tex]v_{baseball}=\frac{P_{bullet}}{m_{baseball}}[/tex]
Where m is the mass of the ball which is 0.151 g.
A satellite’s speed is
5,000 m/s. After 1 min, it is 10,000 m/s.
What is the satellite’s acceleration?
Acceleration = (change in speed) / (time for the change)
Change in speed = (10,000 m/s) - (5,000 m/s)
Change in speed = 5,000 m/s
Time for the change = 1 minute
Time for the change = 60 sec
Acceleration = (5,000 m/s) / (60 s)
Acceleration = 83-1/3 m/s²
Hi can anyone please help me with this question? i just cant seem to do it.. Thanksss
Newtons Universal Gravitational Law.
Bill gates a billionaire and space-X CEO, send Robin, 65kg, to planet Gidz. Gidz has a very weak gravitational attraction, of 1.56 N/Kg. Planet GIdz has a radius of 6.35 x 10^11 m.
i. determine the mass of planet Gidz.
Answer:
F = G M m / R^2 = m a
G M / R^2 = a
M = a R^2 / G
M = 1.56 N/kg * 6.35 m^2 / 6.67E10-11 N-m^2 / kg^2
M = 1.56 * 6.35 / 6.67E-11 kg
M = 1.49 * 10^11 kg
three way to calculate average are