what is an example of a symptom or effect of an illness that would likely lead to impaired digestion and absortion?

Answers

Answer 1

One example of a symptom or effect of an illness that would likely lead to impaired digestion and absorption is inflammatory bowel disease (IBD), which can cause inflammation and damage to the intestinal lining, making it difficult for nutrients to be properly absorbed. Other symptoms of IBD can include diarrhea, abdominal pain, and weight loss.

An example of a symptom or effect of an illness that would likely lead to impaired digestion and absorption is diarrhea. Diarrhea can be caused by various factors such as infections, food intolerances, or certain medications.

When experiencing diarrhea, the body's ability to digest and absorb nutrients is compromised due to the rapid movement of food through the digestive system, resulting in reduced nutrient absorption and potential nutrient deficiencies.

To know more about digestion visit:

https://brainly.com/question/29028558

#SPJ11


Related Questions

Even though the Sun gets lower in the sky after solar noon, and the intensity of incident solar radiation is reduced, the air temperature continues to climb after solar noon because

Answers

Even though the Sun gets lower in the sky after solar noon, and the intensity of incident solar radiation is reduced, the air temperature continues to climb after solar noon because energy is still being absorbed by the ground faster than it is being lost

Solar radiation is a broad word for the electromagnetic radiation that the sun emits. It is also sometimes referred to as the solar resource or just sunshine. A multitude of devices can be used to catch solar radiation and transform it into useful forms of energy, such as heat and electricity.

The energy that the Sun emits into space in the form of electromagnetic waves is known as solar radiation. This energy, which is released by the Sun's surface, affects climatological and atmospheric processes. Visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays are all types of solar radiation.

Cardiovascular disease can be caused by radiation by altering the cardiovascular system, harming the heart, hardening and narrowing arteries, and/or removing part of the cells from the blood vessel linings.

To learn more about solar radiation please visit -
https://brainly.com/question/23338147
#SPJ4

Using the criteria you described in your previous answer, how would you compare solar power to fossil fuel power?

Answers

Solar power differ to fossil fuel power in that solar power is a much more optimal resource than fossil fuels

Solar power; however provides much more energy than fossil fuel powerInterestingly too, solar power resource can be used without releasing greenhouse gases compared to fossil fuels powerInfact, solar energy is the most reliable

What is renewable energy?

Renewable energy simply refers to energy that is not depleted when used. An example of such is solar power.

So therefore, solar power differ to fossil fuel power in that solar power is a much more optimal resource than fossil fuels

Learn more about renewable energy:

https://brainly.com/question/79953

#SPJ1

Analog signals from sensors are changed to digital signals for processing by the computer through which type of circuit?

Answers

Analog signals from sensors are changed to digital signals for processing by the computer through analog to digital converter circuit.

What is a Circuit?

This is referred to as a path in which electric current flows and comprises of components such as resistor, capacitor etc.On the other hand, analog to digital converter circuit is responsible for the conversion of the analog signals to digital or binary forms and is read through the use of a microcontroller.

The digital signal is what is in vogue as of today due to its synergy with modern electric devices which are common in today's world which explains the need for the conversion to this type of signal.

This is therefore the reason why analog to digital converter circuit was chosen as the most appropriate choice in this type of scenario.

Read more about Analog to digital converter here https://brainly.com/question/24750760

#SPJ1

A microwave is a(n) _____ that is directed from one microwave station tower to another

Answers

The high-frequency radio signal is the answer.

Radiofrequency (RF) radios are in the wavelength band of 100 to 10 meters and extend from 3 MHz to 30 MHz. Much of the HF bandwidth is allocated to mobile and fixed voice communications services that require transmission bandwidth of less than 12 kHz. International (Shortwave) Broadcast

Radio Frequency (HF) is an ITU term for the range of high-frequency electromagnetic waves (radio waves) from 3 to 30 MHz (MHz). It is also known as the decameter band or decameter wave because it has wavelengths in the range of 1 to 10 decameter (tens to hundreds of meters).

Learn more about radio waves here:https://brainly.com/question/69373

#SPJ4

A car drives 17.9 m/s east. It
accelerates at 2.88 m/s² at a
137.7° angle. How long does it
take until the car is driving directly
north?

Answers

The time taken for the car to drive directly north is 8.52 seconds.

Time of motion of the car

v = u + at

At 137.7° angle

v = u + a cosθ(t)

v = 17.9 + 2.88cos(137.7)t

v = 17.9 - 2.1t

when the car is directly north, v = 0

0 =  17.9 - 2.1t

2.1t = 17.9

t = 17.9/2.1

t = 8.52 seconds

Thus, the time taken for the car to drive directly north is 8.52 seconds.

Learn more about time of motion here: https://brainly.com/question/2364404

#SPJ1

Dr. Albert gets a spark from the static in the door knob. He is not hurt. However, the electric _____ is high.

Answers

Dr. Albert gets a spark from the static in the door knob. He is not hurt. However, the electric current is high.

What is the static spark?

Sparks that are considered "static" have a massive momentary current and power (momentary like less than a millionth of a second.) However, the overall wattage of these sparks is exceedingly low. It's really too little to harm your muscles with heat (or even any warming a thermometer could detect.)

Negative and positive charges in an object must balance out for static electricity to occur. These charges may accumulate on an object's surface until they can be released or discharged. They can be discharged via a circuit, for example.

Learn more about static spark here:

https://brainly.com/question/4045527

#SPJ4

When you lift a book from the ground to your desk, what kind of work do you do, negative or positive

Answers

When you lift the book, you are doing positive work

Because the force you apply to the book is in the same direction as its displacement, lifting it is considered positive work. Inverse work is being done by gravity. The gravitational potential energy of the object increases as you elevate the book.

What is Work ?

The product of an object's displacement and the component of the applied force that is directed in the direction of the object's displacement is known as the work done by a force.

Positive Work: When a force is applied to an object in its direction of motion, it is said to have been performed positively.Negative Work Done: When a force is applied to an object in the wrong direction, the work is said to be negative.

Learn more about Work here:

https://brainly.com/question/25923373

#SPJ4

What is the energy of a photon of ultraviolet radiation with a frequency of 4.4 × 1015 hz? planck’s constant is 6.63 × 10–34 j • s. 2.9 × 10–18 j 2.9 × 10–34 j 2.9 × 10–48 j

Answers

The energy of a photon of ultraviolet radiation is E = 2.91 * 10^-18 J

What is a photon?

A photon is a particle of light defined as a discrete bundle (or quantum) of electromagnetic energy.

The energy of a photon is obtained by multiplying Planck's constant by the frequency of electromagnetic radiation:

E = h * f

where,

h is Planck's constant

h= 6.63×10⁻³⁴ Js

f= 4.4×10^15 Hz

Substituting the values in the equation for Energy:

E = (6.63×10⁻³⁴) * ( 4.4×10^15)

E = 2.91 * 10^-18 J

Hence,

The energy of a photon of ultraviolet radiation is E = 2.91 * 10^-18 J

Learn more about photon energy here:

https://brainly.com/question/2393994

#SPJ4

Answer: the first choice!

Explanation: did it the question on edg!:)

The reason the jovian planets lost very little of their original atmosphere is due to their?

Answers

The reason for which the jovian planets lost very little of their original atmosphere is due to their large mass.

What are the jovian planets?

The jovian planets are celestial bodies formed by gaseous huge masses of dust instead of rock planes such as, among others, the Earth planet.

These types of planets (jovian planets)  include four major celestial bodies, i.e., Jupiter, Saturn, Uranus, and Neptune.

The jovian planets are characterized to have a thick atmosphere that is composed of different elements such as hydrogen, and methane.

In conclusion, the reason for which the jovian planets lost very little of their original atmosphere is due to their large mass.

Learn more about  the jovian planets here:

https://brainly.com/question/13037269

#SPJ1

Edwin hubble was able to show that (with the exception of our nearest neighbors) the farther a galaxy is from us, the?

Answers

Edwin hubble was able to show that (with the exception of our nearest neighbors) the farther a galaxy is from us, the faster it is moving away from us.

Hubble ultimately demonstrated that, contrary to the widely accepted belief that the universe is static, galaxies are actually moving away from us. Hubble noticed that the light appeared to be shifted toward the red end of the spectrum by observing the light coming from distinct galaxies.

Hubble made the amazing discovery that a galaxy's redshift exactly correlated with its distance from the earth. That implied that objects farther from Earth were dispersing more quickly. To put it another way, the cosmos must be growing. In 1929, he made his discovery public.

Learn more about galaxy here;

https://brainly.com/question/2905713

#SPJ1

What are the different mechanisms for transferring energy to or from a control volume?

Answers

The different mechanisms for transferring energy to or from a control volume is heat , work and mass .

According to the question

Definition of energy :

The basic definition of energy is capacity to do work.

Types of energy :

The energy can be of various types which can be- heat energy, internal energy, electrical energy, chemical energy and nuclear energy.

The transformation of energy :

The transformation of energy is the conversion mechanism of energy from one form to another. During the transformation process, some portion of the energy is converted into the useless form known as dissipation of energy .

The different mechanisms which transfer energy to or from control volume are:

1, heat

2 .work

3. mass.

Hence, the different mechanisms for transferring energy to or from a control volume is heat , work and mass .

To know more about energy here:

https://brainly.com/question/1932868

#SPJ4

The volume of gas in a flexible container at a depth of 10 m/33 ft will expand to ______ its original volume if taken to the surface. Select one: Twice. Three times. Four times. None of the above.

Answers

The volume of gas in a flexible container at a depth of 10 m/33 ft will expand to double its original volume if taken to the surface.

What is volume:

The amount of space that a substance or object occupies.

Volume is denoted with letter V

What is a gas molecule?

Generally, a gas molecule is simply defined as a combination of numbers of atoms that are connected one to another.

here, 10 m/33 feet of sea water is taken to exerts a gauge pressure that is the same pressure as the atmosphere.

This means that we add one atmosphere/bar pressure for every 10 m/33 feet you descend.

The effect of this is that,

at 10 m/33 ft absolute pressure is two ata/bar

Adding another 10 m/33 ft to this depth to make it 20 m/66 ft, puts you under under three ata/bar of pressure and so on.

Descending to a depth it means that you have double the ata/bar pressure acting on you. If you decide to resurface, the pressure on the flexible container will reduce by a factor of two.

Since volume is inversely proportional to the pressure,

If the pressure reduces by a factor of 2, then the volume will increase by a factor of two.

Learn more about volume of gas here:

https://brainly.com/question/17328636

#SPJ4

A relief plane flying horizontally at 65.0 m/s is delivering a
food package to people stranded on an island. If the
island is a horizontal distance of 789 m away,
how high is the plane?
(Unit = m)
22000
Ay (m)
mily

Answers

The height of the plane delivering a food package to people stranded on an island is 722.2 m.

Time of motion of the food package

The time taken for the food package to hit the ground level is calculated as follows;

X = vt

where;

X is horizontal distance traveled by the food packagev is horizontal distancet is time of motion

t = X/v

t = 789/65

t = 12.14 seconds

Height of the plane

h = ¹/₂gt²

where;

h is height of fall of the food package which is height of the planet is time of motion of food packageg is acceleration due to gravity

h = (0.5)(9.8)(12.14²)

h = 722.2 m

Thus, the height of the plane delivering a food package to people stranded on an island is 722.2 m.

Learn more about height here: https://brainly.com/question/1739912

#SPJ1

Answer:

722.2

Explanation:

Some tornadoes have central downdrafts that accompany the massive rotating updrafts.
a. True
b. False

Answers

Some Tornadoes have central downdrafts that accompany the massive rotating updrafts. True

Mid-altitude winds come into the storm from the rear (or on the west or southwest side). As this dry, cool air enters the system, rain evaporates, cooling it even more. The cooling air becomes cooler than the surrounding air, sinks, and forms a strong downdraft.

Updrafts characterize a storm's early development, during which warm air rises to the level where condensation starts and precipitation starts to expand. In a mature storm, updrafts are present alongside downdrafts caused by cooling and falling precipitation.

Learn more about Tornadoes here https://brainly.com/question/18155172

#SPJ4

Which kinetic chain checkpoint should be observed carefully because it controls the movement of the lower extremities? The hip The knee The shoulder The head and neck

Answers

The hip is the kinetic chain checkpoint which controls the movement of the lower extremities and is denoted as option A.

What is Hip?

This part of the body has a ball-and-socket joint and ensures adequate movement of the legs.

The legs and other parts such as ankle etc are referred to as the lower extremities thereby making it the most appropriate choice.

Read more about Hips here https://brainly.com/question/4977336

#SPJ1

An energy storage system based on a flywheel (a rotating disk) can store a maximum of 3.7 MJ when the flywheel is rotating at 16000 revolutions per minute.

Answers

The moment of inertia of the flywheel is 2.63 kg-[tex]m^{2}[/tex]

It is given that,

The maximum energy stored on the flywheel is given as

E=3.7MJ= 3.7×[tex]10^{6}[/tex] J

Angular velocity of the flywheel is 16000[tex]\frac{rev}{min}[/tex] = 1675.51[tex]\frac{rad}{sec}[/tex]

So to find the moment of inertia of the flywheel. The energy of a flywheel in rotational kinematics is given by :

E = [tex]\frac{1}{2}[/tex][tex]Iw^{2}[/tex]

By rearranging the equation:

I = [tex]\frac{2E}{w_{2} }[/tex]

I = 2.63 kg-[tex]m^{2}[/tex]

Thus the moment of inertia of the flywheel is 2.63 kg-[tex]m^{2}[/tex].

Learn more about moment of inertia here;

https://brainly.com/question/13449336

#SPJ4

a skier’s most important piece of equipment

Answers

Answer: A skier’s most important piece of equipment is Ski boots.

Explanation: To find the answer, we need to know about the ski boots.

Why ski boots are the most important equipment for a skier?Skiing can be defined as the action of travelling over snow on skis.There are different equipment's we use during skiing, among them, the most important equipment's is ski boot.Ski boots are not meant for walking, but they provide the skis an extension for their legs.The other equipment's are ski goggles, ski helmets, ski jackets and so on.

Thus, we can conclude that, a skier's most important equipment is Ski boots.

Learn more about ski boots here:

https://brainly.com/question/28108459

#SPJ4

Ski boots are a skier's most essential piece of gear.

We must understand the ski boots in order to determine the solution.

Why are ski boots the most crucial piece of gear for a skier?Skiing is the activity of moving over snow on a pair of skis.While we utilize a variety of equipment when skiing, the ski boot is by far the most crucial piece of gear.Although ski boots are not designed for walking, they provide the skis an extra leg.The other equipment includes ski coats, ski helmets, and ski goggles.

So, it stands to reason that ski boots are a skier's most essential piece of gear.

Learn more about the ski boots here:

https://brainly.com/question/28108459

#SPJ1

Two hockey pucks with mass 0.1 kg slide across the ice and collide. Before
the collision, puck 1 is going 15 m/s to the east and puck 2 is going 12 m/s to
the west. After the collision, puck 2 is going 15 m/s to the east. What is the
velocity of puck 1?
A. 12 m/s west
B. 15 m/s east
C. 15 m/s west
D. 12 m/s east

Answers

The velocity of pluck 1 is 12 m/s west.

What is the conservation of momentum?

The principle of the conservation of the linear momentum states that momentum before collision is equal to momentum after collision.

Now given that;

m1u1 + m2u2 = m1v1 + m2v2

(0.1 * 15) - (0.1 * 12) = 0.1* v + (0.1 * 15)

1.5 - 1.2 = 0.1v + 1.5

0.3 - 1.5 = 0.1v

v = -1.2/0.1

v = - 12 m/s

Hence, the velocity of pluck 1 is 12 m/s west.

Learn  more about linear momentum:https://brainly.com/question/27988315

#SPJ1

Five stars are shown on the following H-R diagrams. Rank the stars based on their surface temperature from highest to lowest. If two (or more) stars have the same surface temperature, drag one star on top of the other(s).

Answers

All five stars appear at the same place along the horizontal axis showing spectral type.

Because spectral type is related to surface temperature, all five stars must have the same surface temperature.

Now proceed to Part C to determine how these stars vary in luminosity.

What is a Star?

This refers to the heavenly body that is a natural luminous body that is visible in the sky, especially at night

Hence, we can see that based on the ranking of stars, the surface temperature of each star is taken into account, and based on their spectral type, the stars all have the same temperature.

Therefore, to show the difference between the stars, their luminous intensity needs to be analyzed,

Read more about stars here:

https://brainly.com/question/1320222

#SPJ1

how do you use atomic models​

Answers

1234567891011121314151617181920

Because white dwarfs are small, as their name implies, they are hard to see. What is a way astronomers have to find white dwarfs that distinguishes them from main sequence stars

Answers

Astronomers find white dwarfs that distinguish them from main sequence stars because white dwarfs get really hot, we can search for their ultraviolet radiation.

What is a white dwarf?

A white dwarf is a very hot star that radiated much energy in the form of ultraviolet radiation.

This UV radiation is initially very bright and then these stars become red with time.

In conclusion, Astronomers find white dwarfs they can search for their ultraviolet radiation.

Learn more about white dwarfs here:

https://brainly.com/question/19602278

#SPJ1

Which type of graph could be easily converted into a pie chart?
A. Variable plot
B. Scatter plot
C. Bar graph
D. Line graph

Answers

Answer:

D.Linegraph

Explanation:

Linegraph could be easily converted into a pie chart

Answer:

bar graph

Explanation:

Modern methods of massively parallel sequencing include devices for detecting fluorescence or visible light as each:

Answers

Modern methods of massively parallel sequencing include devices for detecting fluorescence or visible light as each nucleotide is incorporated during synthesis.

Each nucleotide is marked with fluorescent dye, and a some traces of fluorescent intensities helps identify sequences.

What is nucleotide?

Nucleotides are organic compounds made up of a phosphate and a nucleoside.They function as monomeric units of the key macromolecules found in all living forms on Earth, deoxyribonucleic acid (DNA), and ribonucleic acid (RNA), which are both nucleic acid polymers. In addition to being produced by the liver from common nutrients, nucleotides can also be received through diet. A nucleobase, a five-carbon sugar (ribose or deoxyribose), and a phosphate group made up of one to three phosphates are the three component molecules that make up a nucleotide. Guanine, adenine, cytosine, and thymine are the four nucleobases found in DNA; uracil is used in place of thymine in RNA.On a fundamental, biological level, nucleotides are also essential to metabolism. They supply chemical energy throughout the cell in the form of the nucleoside triphosphates adenosine triphosphate (ATP), guanosine triphosphate (GTP), cytidine triphosphate (CTP), and uridine triphosphate (UTP).These are necessary for the synthesis of amino acids, proteins, and cell membranes as well as for moving the cell and its components (both internally and between cells), cell division, and other cellular processes.Nucleotides are also key cofactors in enzyme activities and take role in cell signaling (cyclic guanosine monophosphate, or cGMP, and cyclic adenosine monophosphate, or cAMP).

Know more about nucleotide https://brainly.com/question/13185536

#SPJ4

One similarity in the spectra of T dwarf stars and giant planets in our solar system is that their spectra show:

Answers

One similarity in the spectra of T dwarf stars and giant planets in our solar system is that their spectra show: "Indications of methane"

What is solar system?

The solar system is made up of planets, moon, asteroids, comets, dust, and gas that revolve around the sun, which is our nearest star.

It consists of the giant planets Jupiter and Saturn, the ice giant Uranus and Neptune, and the rocky core planets Mercury, Venus, Earth, and Mars.

Some key points of solar system are-

The solar nebula, a massive cloud of gas and dust, began to collapse in on itself some some 4.6 billion years ago, forming the solar system's star and planets. Scientists have used meteorites, or bits of space rock which have fallen on Earth, to determine the age of the universe. Some of these tiny fragments, which have fallen off of planets or moons, can provide intriguing scientific data regarding the makeup and past of their parent body. Since the beginning of the solar system, before the planet even existed, others have been orbiting the sun. The oldest meteorite is 4.55 billion years old and came to Earth in the Allende meteor, which was dispersed over Mexico in 1969.

To know more about Our Solar System, here

https://brainly.com/question/13979351

#SPJ4

A force of 50 n is used to push a wheelchair forward at constant velocity. if the wheelchair is displaced 0.5 m each second, what is the mechanical power expended when transporting the wheelchair?

Answers

The mechanical power expended when transporting the wheelchair is 25 Watts

What is power?

Power is defined as  the amount of energy transferred or converted per unit time. The unit of power is measured in Watts. The higher units are kilowatts, megawatts etc.

The formula for calculating the power expended is expressed as:

Power = Workdone/Time

Since workdone = force * distance, the formula for power will be:

Power = Force*distance/Time

Given the following parameters

Force = 50N

distance = 0.5m

time = 1 second

Substitute to determine the power

Power = 50*0.5/1

Power = 25/1

Power = 25Watts

Hence the mechanical power expended when transporting the wheelchair is 25 Watts

Learn more on power here; https://brainly.com/question/24858512

#SPJ1

A block is thrown with an initial velocity of 30.0 m/s at an angle of 25.0o above the horizontal. What is the highest elevation reached by the ball in its trajectory in meter

Answers

The highest elevation reached by the ball in its trajectory is 16.4 m.

To find the answer, we need to know about the maximum height reached in a projectile.

What's the mathematical expression of the maximum height reached in a projectile motion?

The maximum height= U²× sin²(θ)/gU= initial velocity, θ= angle of projectile with horizontal and g= acceleration due to gravity

What's the maximum height reached by a block that is thrown with an initial velocity of 30.0 m/s at an angle of 25° above the horizontal?

Here, U = 30.0 m/s and θ= 25°Maximum height= 30²× sin²(25)/9.8

= 16.4m

Thus, we can conclude that the highest elevation reached by the ball in its trajectory is 16.4 m.

Learn more about the projectile motion here:

brainly.com/question/24216590

#SPJ4


Barry slides across an icy pond. The coefficient of kinetic friction between his
shoes and the ice is 0.15. If his mass is 83 kg, what is the force of friction
acting on him?
OA. 813 N
B. 1150 N
C. 122 N
D. 352 N

Answers

The force of friction acting on him is 122 N. The correct answer is option C

What is Friction ?

Friction is a force that opposes the motion of a static or a moving object.

Given that Barry slides across an icy pond. The coefficient of kinetic friction between his shoes and the ice is 0.15. If his mass is 83 kg

The given parameters are;

Mass m = 83 kgCoefficient of kinetic friction μ = 0.15Frictional force [tex]F_{r}[/tex] = ?

The normal reaction N on the body = mg

N = 83 x 9.8

N = 813.4 N

The Frictional force formula is  [tex]F_{r}[/tex] = μN

[tex]F_{r}[/tex] = 0.15 x 813.4

[tex]F_{r}[/tex] = 122.01 N

Therefore, the force of friction acting on him is 122 N approximately.

Learn more about Friction here: https://brainly.com/question/24338873

#SPJ1

Clouds lose their __________ when the surrounding air temperature equals the rising air temperature.

Answers

Clouds lose their stability when the surrounding air temperature equals the rising air temperature.

When vapor condenses and produces the billowing columns, the ascending air, which is still warmer than the nearby air, rises. occurs when radiation even during night cools the Earth's surface as well as the air around.

As a result, the air parcel can increase until all of the latent heat has already been released as well as the "surplus" water vapor has condensed. Hence, the fundamental factor that prevents clouds from rising is the cessation of the production of heat transfer through condensation.

To know more about air.

https://brainly.com/question/19368011

#SPJ4

Patient is in the ed due to a football hitting his nose when playing tackle football in the park. X-ray shows a displaced nasal fracture. What icd-10-cm codes are reported?

Answers

ICD-10-CM codes are -S02.2XXA, W21.01XA, Y93.61, Y92.830


S02.2 for Fracture, Traumatic/Nasal (Bone(s)), ICD-10-CM Alphabetic Index. Both the open fracture code and the dislocation code are not reported. Only the fracture code is provided if a fracture and a dislocation happen at the same place. Search for "dislocation/with fracture" in the alphabetical index to be sent to a doctor. A closed fracture is a fracture with displacement. To report the conditions leading up to the injury, external cause codes are utilized. Look for Struck (accidentally) by/ball (struck) (thrown)/football W21.01 in the ICD-10-CM External Cause of Injuries Index. Seven characters are required in the Tabular List to finish the code. For the first encounter, X is utilized as a stand-in for character number six, and character number seven is given the letter A.

To learn more about ICD-10-CM please visit -https://brainly.com/question/27932590
#SPJ1

Two bumpers cars are headed for a collision at Rue Le Dodge on a Great America physics field trip. One bumper car has a mass of 46.3 kg heading to the right at 5.24 m/s, while the other has a mass of 55.4 kg headed in the opposite direction (to the left) at a speed of 1.79 m/s. If the two bumper cars collide, what will be the total momentum of both cars after the collision? Round your answer to two decimals.

Answers

The total momentum after collision is 143.466 kgm/s.

What is momentum of a body?

The momentum of a body is the product of the mass and the velocity of the body.

Momentum = mass * velocity

Assuming the right direction as positive and left direction as negative:

Total Momentum before collision = Total Momentum after collision

Momentum to the right = 46.3 * 5.24 = +242.612 kgm/s

Momentum to the left = 55.4 * -1.79 = -99.166 kgm/s

Total momentum before collision =  +242.612 kgm/s - 99.166 kgm/s

Total momentum before collision = 143.466 kgm/s

Thus, total momentum after collision is 143.466 kgm/s.

In conclusion, momentum is conserved in an isolated system of colliding bodies.

Learn more about momentum at: https://brainly.com/question/1042017

#SPJ1

Other Questions
A Limb anomolies caused by thalidomide classically illustrate effects of chemical teratogens on embryonic limb development. a. True b. False Hand written rsums are still used frequently. Please select the best answer from the choices provided T F. Let T be the linear transformation defined byT(x1,x2,x3,x4,x5)=6x1+7x2+9x3+8x4.Its associated matrix A is an nm matrix,where n=? and m=? 2) john kay's invention of the "flying shuttle" was instrumental during the industrial revolution because ita) decreased the need for mechanization.b) increased the efficiency of steam engines.) allowed for more food products to be grown.d) sped the production of textiles and clothing, Given a sorted linked list, the add(Object obj) operation inserts the argument obj in a location that maintains the list sorted. Assume a linear search algorithm is being used to figure out where to add obj. What would be the time complexity of this method? a. O(n) b. O(n2)c. O(log n) d. 0(1) Though characters may start with a particular weapon, they must have the option of switching weapons in the future and potentially weapons that have not even been thought of yet. Since the characters must defend themselves against the Orcs and Goblins and Trolls that abound, they must be able to fight using whatever weapon they are assigned. However, if they have taken so much damage that their Hit Points are zero, they cannot participate in the fight. After writing your core Java classes, you decide to have little fun by creating a Java program that assembles a party with these characters and tests them by subjecting them to a dragon attack! Tasks O O 1. Create the WeaponBehavior interface with the following feature: o public abstract void useWeapon() method 2. Create the following classes implementing the WeaponBehavior interface and printing the appropriate text to the console when the useWeapon() method is invoked: o SwordBehavior : "The sword swishes back and forth to find an opening." o AxeBehavior "The axe cleaves through the air and everything else." o MagicStaffBehavior "The staff crackles with eldritch power." o BowAndArrowBehavior "The arrow streaks through the air to its target." o NoneBehavior "Arms flail wildly in an attempt to confuse." Pretend you are a a citizen of Austro-Hungary and you are explaining to your family members in another country why the war has started. Be sure to cite three reasons/causes for the war, and explain those reasons with accurate historical details. End the letter, with your ideas on how war could have been avoided how does an auditors commitment to the firm, view of oneself as a professional, and loyalty to colleagues influence whether he will blow the whistle on financial wrongdoing? The nth term of an arithmetic sequence is given by un=15-3n.a. [1 mark] State the value of the first term, u1.b. [2 marks] Given that the nth term of this sequence is -33, find the value of n.c. [2 marks] Find the common difference, d. Why should the Mellah in Morocco be visited? A real estate analyst estimates the following regression, relating a house price to its square footage (Sqft):PricePrice^ = 48.21 + 52.11Sqft; SSE = 56,590; n = 50In an attempt to improve the results, he adds two more explanatory variables: the number of bedrooms (Beds) and the number of bathrooms (Baths). The estimated regression equation isPricePrice^ = 28.78 + 40.26Sqft + 10.70Beds + 16.54Baths; SSE = 48,417; n = 50 I NEED HELP ASAP! IF ANYONE CAN HELP ME I'D BE GRATEFUL.. 111218Read the passage from chapter 7 of Animal Farm.As Clover looked down the hillside her eyes filled withears. If she could have spoken her thoughts, it wouldmave been to say that this was not what they hadimed at when they had set themselves years ago towork for the overthrow of the human race. Thesecenes of terror and slaughter were not what they hadoked forward to on that night when old Major firstrred them to rebellion. If she herself had had anycture of the future, it had been of a society of animalsfree from hunger and the whip, all equal, eachking according to his capacity, the strongtecting the weak, as she had protected the lostod of ducklings with her foreleg on the night ofor's speech. Instead-she did not know why-theycome to a time when no one dared speak hisd, when fierce, growling dogs roamed everywhere,when you had to watch your comrades torn toWhich details best support the idea that the farm is asymbol for Russia under the rule of the CommunistParty? Select two options.O'as Clover looked down the hillside"O "these scenes of terror and slaughter"O"if she herself had had any picture of the future""had protected the lost brood of ducklings""come to a time when no one dared speak his mind" If government expenditures increase by $800B and MPS is equal to 0. 05, what will be the increase in real GDP Problem 5: If there is a 50-50 chance of rain today, compute the probability that it will rain in 3 days from now if a = .7 and 8 = .3. I . Problem 6: Compute the invariant distribution for the previous problem. True/False: limelight was first used for surveying from mountaintop to mountaintop. Suppose the graph represents the labor market. Line shows the relationship between the wage and the number of people willing to work. Lineshows the relationship between the wage and the number of people firms wish to hire. Quantity (workers) The demand curve for labor exhibits relationship between wage and quantity of workers demanded, and the supply curve of labor exhibits relationship between wage and the quantity of people willing to work. identify a single test reagent(s) that separates the chloride ion from the carbonate ion in solution. explain. if you start with 1.115 g of aluminum, how many grams of alum should be obtained? How would you classify Frito-Lay's marketing strategy of its Lay's potato chips in China was it globalization,adaptation,or customization? Explain