what is 1/2 x 1/3 i could never get this answer its to hard!!!

Answers

Answer 1

Answer: there

Step-by-step explanation:

0.16666666666


Related Questions

Simplify and write the trigonometric expression in terms of sine and cosine: (1+cos(y))/(1+sec(y))

Answers

The simplified expression in terms of sine and cosine is:
[tex]cos(y) + \frac{1}{(cos(y)+1) }- \frac{sin(y)^2}{(cos(y)+1)}[/tex]

To simplify the expression (1+cos(y))/(1+sec(y)), we need to rewrite sec(y) in terms of cosine and simplify. Recall that sec(y) = 1/cos(y). Substituting this in, we get:

[tex]\frac{(1+cos(y))}{(1+sec(y))} =\frac{ (1+cos(y))}{(1+1/cos(y))}[/tex]

Now we need to get a common denominator in the denominator of the fraction. Multiplying the second term by cos(y)/cos(y), we get:

[tex]\frac{(1+cos(y))}{(1+1/cos(y))} =\frac{ (1+cos(y))}{(cos(y)/cos(y) + 1/cos(y))} = \frac{(1+cos(y))}{((cos(y)+1)/cos(y))}[/tex]
Next, we invert the denominator and multiply by the numerator to simplify:

[tex]\frac{(1+cos(y))}{((cos(y)+1)/cos(y)) }= \frac{(1+cos(y)) * (cos(y)}{(cos(y)+1))} = cos(y) + cos(y)^2 / (cos(y)+1)[/tex]

Finally, we can simplify further using the identity cos(y)^2 = 1 - sin(y)^2, which gives:

[tex]cos(y) + cos(y)^2 / (cos(y)+1) = cos(y) + (1-sin(y)^2)/(cos(y)+1)[/tex]
Combining the terms, we get:

[tex]\frac{(1+cos(y))}{(1+sec(y))} = cos(y) + (1-sin(y)^2)/(cos(y)+1)\\\\ = cos(y) + 1/(cos(y)+1) - sin(y)^2/(cos(y)+1)[/tex]

Therefore, the simplified expression in terms of sine and cosine is:

[tex]cos(y) + \frac{1}{(cos(y)+1) }- \frac{sin(y)^2}{(cos(y)+1)}[/tex]

learn more about expression

https://brainly.com/question/10271512

#SPJ11

HELP!! Triangle MNO is dilated to create triangle PQR on a coordinate grid. You are given that angle N is congruent to angle Q. What other information is required to prove that the two triangles are similar?

Answers

Once we have established that all three angles are congruent and all three sides are proportional, we can conclude that the two triangles are similar.

To prove that the two triangles are similar, we need to show that all three angles are congruent, and all three sides are proportional.

We know that angle N is congruent to angle Q, but we need to find additional information to prove that the triangles are similar. One possible piece of information could be the length of one side or the ratio of two sides.

If we know the ratio of the lengths of two corresponding sides in the two triangles, we can use that information to show that all three sides are proportional.

Alternatively, if we know the length of one side in both triangles, we can use the angle-angle similarity theorem to show that all three angles are congruent.

To learn more about : triangles

https://brainly.com/question/17335144

#SPJ11


A spinner has sections that are numbered 1 through 5. Melanie spins the spinner 15 times and
records her results in the dot plot.
Use the results to predict the number of times
the spinner will land on an even number in 300 trials
300 trials.

Answers

Answer:

160 times in 300 trials

Explanation:

Since the spinner has 5 sections numbered 1 through 5, there are 2 even numbers (2 and 4) and 3 odd numbers (1, 3, and 5).

From the given dot plot, we can see that Melanie landed on an even number 8 times out of 15 spins.

To predict the number of times the spinner will land on an even number in 300 trials, we can use proportion:

8/15 = x/300

Multiplying both sides by 300, we get:

x = 160

Therefore, we can predict that the spinner will land on an even number approximately 160 times in 300 trials.

A soft drink dispensing machine uses plastic cups that hold a maximum of 12 ounces. The machine is set to dispense a mean of x = 10 ounces of liquid. The amount of liquid that is actually dispensed varies. It is normally distributed with a standard deviation of s = 1 ounce. Use the Empirical Rule (68%-95%-99.7%) to answer these questions. (a) What percentage of the cups contain between 10 and 11 ounces of liquid? % (b) What percentage of the cups contain between 8 and 10 ounces of liquid? % (c) What percentage of the cups spill over because 12 ounces of liquid or more is dispensed? % (d) What percentage of the cups contain between 8 and 9 ounces of liquid?

Answers

1)  The percentage of cups that contain between 10 and 11 ounces of liquid is approximately 34%.

2) The percentage of cups that contain between 8 and 10 ounces of liquid is approximately 81.5%.

3) The percentage of cups that spill over is approximately 0.3%.

4) The percentage of cups that contain between 8 and 9 ounces of liquid is approximately 2.5%.

To use the Empirical Rule, we need to assume that the distribution of the amount of liquid dispensed by the soft drink machine follows a normal distribution.

(a) To find the percentage of cups that contain between 10 and 11 ounces of liquid, we need to find the area under the normal curve between 10 and 11 standard deviations from the mean, which is represented by the interval (x - s, x + s).

According to the Empirical Rule, we know that approximately 68% of the data falls within one standard deviation of the mean. Therefore, the percentage of cups that contain between 10 and 11 ounces of liquid is approximately 68%/2 = 34%.

(b) To find the percentage of cups that contain between 8 and 10 ounces of liquid, we need to find the area under the normal curve between 8 and 10 standard deviations from the mean, which is represented by the interval (x - 2s, x + s).

According to the Empirical Rule, we know that approximately 95% of the data falls within two standard deviations of the mean. Therefore, the percentage of cups that contain between 8 and 10 ounces of liquid is approximately (95%-68%)/2 + 68% = 81.5%.

(c) To find the percentage of cups that spill over because 12 ounces of liquid or more is dispensed, we need to find the area under the normal curve to the right of 12 standard deviations from the mean, which is represented by the interval (x + 2s, ∞). According to the Empirical Rule, we know that approximately 99.7% of the data falls within three standard deviations of the mean. Therefore, the percentage of cups that spill over is approximately 0.3%.

(d) To find the percentage of cups that contain between 8 and 9 ounces of liquid, we need to find the area under the normal curve between 8 and 9 standard deviations from the mean, which is represented by the interval (x - 2s, x - s).

This interval is equivalent to the complement of the interval (x + s, x + 2s), which we can find using the Empirical Rule. The percentage of data falling outside of two standard deviations of the mean is (100% - 95%) / 2 = 2.5%.

Therefore, the percentage of cups that contain between 8 and 9 ounces of liquid is approximately 2.5%.

To know more about Mean, visit;

https://brainly.com/question/20118982

#SPJ11

Let v1= [1,2,-1], v2=[-2,-1,1], and y=[4,-1,h]. For what value of h is y in the plane spanned by v1 and v2?

Answers

The value of h that makes y lie in the plane spanned by v1 and v2 is 7.5.

How to determine plane spanned?

To find the value of h that makes y lie in the plane spanned by v1 and v2, we need to check if y can be written as a linear combination of v1 and v2. We can do this by setting up a system of equations and solving for h.

The plane spanned by v1 and v2 can be represented by the equation ax + by + cz = d, where a, b, and c are the components of the normal vector to the plane, and d is a constant. To find the normal vector, we can take the cross product of v1 and v2:

v1 x v2 = (-1)(-1) - (2)(1)i + (1)(-2)j + (1)(2)(-2)k = 0i - 4j - 4k

So, the normal vector is N = <0,-4,-4>. Using v1 as a point on the plane, we can find d by substituting its components into the plane equation:

0(1) - 4(2) - 4(-1) = -8 + 4 = -4

So, the equation of the plane is 0x - 4y - 4z = -4, or y + z/2 = 1.

To check if y is in the plane, we can substitute its components into the plane equation:

4 - h/2 + 1/2 = 1

Solving for h, we get:

h/2 = 4 - 1/2

h = 7.5

Therefore, the value of h that makes y lie in the plane spanned by v1 and v2 is 7.5.

Learn more about plane spanned

brainly.com/question/13381746

#SPJ11

Is it possible to get a very strong correlation just by chance when in fact there is no relationship between the two variables? True False

Answers

It is not possible to get a very strong correlation just by chance when there is no relationship between the two variables. False

Is it possible to get a very strong correlation just by chance when in fact there is no relationship between the two variables?

Correlation measures the strength and direction of the linear relationship between two variables. A high correlation coefficient indicates a strong relationship between the variables, while a low or near-zero correlation suggests a weak or no relationship.

A strong correlation implies that changes in one variable are associated with predictable changes in the other variable. Therefore, a high correlation cannot occur by chance alone without an underlying relationship between the variables.

Learn more about correlation at https://brainly.com/question/13879362

#SPJ1

Seventh grade


>


AA. 12 Surface area of cubes and prisms RFP


What is the surface area?


20 yd


16 yd


20 yd


24 yd


23 yd


square yards


Submit

Answers

The surface area of the given object is 20 square yards

The question asks for the surface area of an object, but it does not provide any specific information about the object itself. Without knowing the shape or dimensions of the object, it is not possible to determine its surface area.

In order to calculate the surface area of a shape, we need to know its specific measurements, such as length, width, and height. Additionally, different shapes have different formulas to calculate their surface areas. For example, the surface area of a cube is given by the formula 6s^2, where s represents the length of a side. The surface area of a rectangular prism is calculated using the formula 2lw + 2lh + 2wh, where l, w, and h represent the length, width, and height, respectively.

Therefore, without further information about the shape or measurements of the object, it is not possible to determine its surface area. The given answer options of 20, 16, 20, 24, and 23 square yards are unrelated to the question and cannot be used to determine the correct surface area.

Learn more about area here:

https://brainly.com/question/27776258

#SPJ11

Diagonalize A if possible. (Find P and D such that A = PDP−1 for the given matrix A. Enter your answer as one augmented matrix. If the matrix is not able to be diagonalized, enter DNE in any cell.) 9 −10 2 0 [P D] =

Answers

Thus, the augmented matrix for P and D is:
[  1   -1   0  | 9  0  0]
[-1/2 0   1   | 0 -10 0]
[  0   1  1/2 | 0   0  2]

To determine if a matrix can be diagonalized, we need to find its eigenvalues and eigenvectors. Using the characteristic equation, we get:
det(A-λI) = (9-λ)(-10-λ)(2-λ) = 0
Solving for λ, we get λ1 = 9, λ2 = -10, λ3 = 2.
Next, we find the eigenvectors corresponding to each eigenvalue.
For λ1 = 9, we solve the system (A-λ1I)x = 0 and get:
x1 = 1, x2 = -1/2, x3 = 0
So the eigenvector for λ1 is [1, -1/2, 0].
Similarly, for λ2 = -10, we get the eigenvector [-1, 0, 1].
And for λ3 = 2, we get [0, 1, 1/2].
We can then construct the matrix P by arranging the eigenvectors as columns:
P = [1 -1 0; -1/2 0 1; 0 1 1/2]
And the diagonal matrix D by placing the eigenvalues along the diagonal:
D = [9 0 0; 0 -10 0; 0 0 2]
Finally, we can find A = [tex]PDP^{-1}[/tex]:
A = [tex][1,-1 ,0; -1/2 ,0 ,1; 0 ,1 ,1/2] [9 ,0 ,0; 0 ,-10 ,0; 0 ,0 ,2] [1 -1 0; -1/2 0 1]^{-1}[/tex]

Learn more about eigenvalues here:

https://brainly.com/question/31650198

#SPJ11

I need some help :(




Answers

The slope of the line passing through (4, 4) and (0, -2) is 1.5

What is an equation?

An equation is an expression that shows how numbers and variables are related to each other using mathematical operations.

The slope of a straight line is the ratio of its rise to its run. It is given by:

Slope = Rise / Run

Hence, for the line shown passing through (4, 4) and (0, -2):

Slope = (-2 - 4) / (0 - 4) = 1.5

The slope of the line is 1.5

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1

find fx and fy, and evaluate each at the given point. f(x, y) = xy x − y , (5, −5)

Answers

The partial derivative fx of f(x, y) is y, and the partial derivative fy is x - 1. Evaluating at (5, -5), fx = -5 and fy = 4.

To find the partial derivatives of f(x, y), we differentiate f(x, y) with respect to each variable while treating the other variable as a constant.

Partial derivative fx:

To find fx, we differentiate f(x, y) with respect to x while treating y as a constant.

∂/∂x (xy x - y) = y

Partial derivative fy:

To find fy, we differentiate f(x, y) with respect to y while treating x as a constant.

∂/∂y (xy x - y) = x - 1

Now, evaluating at (5, -5):

Substituting x = 5 and y = -5 into the partial derivatives:

fx(5, -5) = -5

fy(5, -5) = 4

For more questions like Derivative click the link below:

https://brainly.com/question/25324584

#SPJ11

An equation is shown:
3x^3+5/x+1 = Ax^2+Bx+C+ R(x)/Q(x)
Determine the values of B, R(x), and Q(x) that make the equation true

Answers

To determine the values of B, R(x), and Q(x) that make the equation true, we need to manipulate the equation and compare the coefficients of like terms on both sides.

The given equation is:
3x^3 + 5/x + 1 = Ax^2 + Bx + C + R(x)/Q(x)

First, let's focus on the left side of the equation:
3x^3 + 5/x + 1

To simplify the expression, we can find a common denominator for the terms. The common denominator is x, so we can rewrite the equation as:
(3x^4 + 5 + x)/x

Now, we have the left side in a single fraction. To make it match the form on the right side, which is Ax^2 + Bx + C + R(x)/Q(x), we can equate the numerators and denominators of the two sides.

Comparing the numerators:
3x^4 + 5 + x = Ax^2 + Bx + C + R(x)

Comparing the denominators:
x = Q(x)

From the comparison, we can deduce the following values:

B = 1 (coefficient of x)
R(x) = 5 (constant term)
Q(x) = x (denominator)

Therefore, the values that make the equation true are B = 1, R(x) = 5, and Q(x) = x.

Answer: B=3 R=-3x-13 Q=x-

Step-by-step explanation: 3x^2-3x+8+(-3x+13)/(1+x) B=3 R(x)=-3x-13 Q(x)=x-1

Hue is arranging chairs. She can form 2 rows of a given length with 4 chairs left over, or 4 rows of that same length if she gets 14 more chairs

Answers

Let's assume Hue has x chairs. According to the first scenario, we can form 2 rows of a given length with 4 chairs left over.

Therefore, if she arranges the chairs in 2 rows, we get:x = 2a + 4 where a is the number of chairs in each row. Simplifying the equation, we have:x - 4 = 2a          ....(i)

On the other hand, Hue can form 4 rows of that same length if she gets 14 more chairs. This means she will have x + 14 chairs. Therefore, if she arranges the chairs in 4 rows, we get:x + 14 = 4a    ....(ii)

Equation (ii) can be rewritten as follows:4a - x = 14     ....(iii)

Solving equations (i) and (iii) gives us the value of x and a. We have:

x - 4 = 2a4a - x = 14

Adding the two equations together, we have

3a = 18

Therefore, a = 6Substituting a = 6 into equation (i) gives us:

x - 4 = 2(6)

Therefore, x = 16

Therefore, Hue has 16 chairs. To check if this answer is correct, we substitute x = 16 into equations (i) and (ii) and check if they are true. We have:

x - 4 = 2a          ....(i)

16 - 4 = 2(6)

This is true.4a - x = 14     ....(iii)

4(6) - 16 = 8 This is also true.

The solution starts by assuming that Hue has x chairs and proceeds to set up two equations, based on the two scenarios given in the question, which must be satisfied simultaneously to get the value of x. Solving the equations gives us x = 16, which means Hue has 16 chairs.

The solution further shows how to check the answer and concludes by stating that the answer is correct.

To know more about length visit:

https://brainly.com/question/32060888

#SPJ11

If y varies inversely as x and y=3 when x = 3, find y when x =4.

Answers

[tex]\qquad \qquad \textit{inverse proportional variation} \\\\ \textit{\underline{y} varies inversely with \underline{x}} ~\hspace{6em} \stackrel{\textit{constant of variation}}{y=\cfrac{\stackrel{\downarrow }{k}}{x}~\hfill } \\\\ \textit{\underline{x} varies inversely with }\underline{z^5} ~\hspace{5.5em} \stackrel{\textit{constant of variation}}{x=\cfrac{\stackrel{\downarrow }{k}}{z^5}~\hfill } \\\\[-0.35em] ~\dotfill[/tex]

[tex]\stackrel{\textit{"y" varies inversely with "x"}}{y = \cfrac{k}{x}}\hspace{5em}\textit{we also know that} \begin{cases} x=3\\ y=3 \end{cases} \\\\\\ 3=\cfrac{k}{3}\implies 9 = k\hspace{9em}\boxed{y=\cfrac{9}{x}} \\\\\\ \textit{when x = 4, what's "y"?}\qquad y=\cfrac{9}{4}\implies y=2\frac{1}{4}[/tex]

When x = 4, y = 9/4. y will be equal to 9/4 or 2.25.

When a variable y varies inversely as x, it means that their product remains constant. We can represent this relationship mathematically as y = k/x, where k is the constant of variation.

To find the value of k, we can substitute the given values into the equation. Given that

y = 3 when x = 3,

we can write the equation as follows:

3 = k/3

To solve for k, we can multiply both sides of the equation by 3:

9 = k

Now that we have determined the value of k, we can use it to find y when x = 4. Substituting the values into the equation:

y = 9/4

Therefore, when x = 4, y = 9/4. Thus, y is equal to 9/4 or 2.25.

For more such answers on the Constant of variations

https://brainly.com/question/25215474

#SPJ8

suppose that the delivery times for a local pizza delivery restaurant are normally distributed with an unknown mean and standard deviation. a random sample of 24 deliveries is taken and gives a sample mean of 27 minutes and sample standard deviation of 6 minutes. the confidence interval is (24.47, 29.53). find the margin of error, for a 95% confidence interval estimate for the population mean.

Answers

The margin of error for the 95% confidence interval estimate for the population mean is approximately 2.402 minutes.

To find the margin of error for a 95% confidence interval estimate for the population mean, we can use the formula:

Margin of Error = (Critical Value) * (Standard Deviation / √(Sample Size))

In this case, the sample size is 24, and the sample mean is 27 minutes. The confidence interval is given as (24.47, 29.53).

To determine the critical value, we need to consider the level of confidence. For a 95% confidence level, the critical value is approximately 1.96 (assuming a large sample size).

The sample standard deviation is given as 6 minutes.

Substituting these values into the formula, we have:

Margin of Error = 1.96 * (6 / √(24))

≈ 1.96 * (6 / 4.899)

≈ 1.96 * 1.226

≈ 2.402

Therefore, the margin of error for the 95% confidence interval estimate for the population mean is approximately 2.402 minutes.

Learn more about Standard Deviation here:

https://brainly.com/question/30252820

#SPJ11

: Explain why L'Hopital's Rule is of no help in finding lim x -> [infinity] rightarrow infinity x+sin 2x/x. Find the limit using methods learned earlier in the semester.

Answers

The limit of the given expression is
lim x -> infinity (x + sin(2x))/x = 1 + 0 = 1

To answer your question, L'Hopital's Rule is of no help in finding lim x -> infinity (x + sin(2x))/x because L'Hopital's Rule applies to indeterminate forms like 0/0 and ∞/∞.

In this case, as x approaches infinity, both the numerator and denominator approach infinity, making the expression an indeterminate form of ∞/∞. However, applying L'Hopital's Rule requires taking the derivative of both the numerator and the denominator, and since sin(2x) oscillates between -1 and 1, its derivative (2cos(2x)) will not help in finding the limit.

To find the limit using methods learned earlier in the semester, we can rewrite the given expression as:

lim x -> infinity (x + sin(2x))/x = lim x -> infinity (x/x + sin(2x)/x)

Now, let's evaluate the limit for each term separately:

lim x -> infinity (x/x) = lim x -> infinity 1 = 1 (since x/x always equals 1)

lim x -> infinity (sin(2x)/x) = 0 (since the sine function oscillates between -1 and 1, its value divided by an increasingly large x will approach 0)

So, the limit of the given expression is:

lim x -> infinity (x + sin(2x))/x = 1 + 0 = 1

Learn more about "limit ":

https://brainly.com/question/23935467

#SPJ11

The time required to build a house varies inversely as the number of workers. It takes 8 workers 25 days to build a house. How long would it take 5 workers?

Answers

It will take 40 days for 5 workers to construct the same house that 8 workers built in 25 days

The time required to build a house varies inversely as the number of people.

Which means if the number of workers is decreased by a component of k, the time required to construct the house might be improved by using a component of k.

let's use the formulation for inverse variation:

t = k/w

in which t is the time required to construct the house, w is the variety of workers, and okay is a consistent of proportionality.

we can use the given information to discover the value of k:

25 = k/8

k = 200

Now we are able to use the value of k to discover the time required to construct the house with 5 workers:

t = 200/5

t = 40

Therefore, it'd take 40 days for 5 workers to construct the same house that 8 workers built in 25 days

Learn more about inverse variation:-

https://brainly.com/question/14978895

#SPJ1

in symbolizing truth-functional claims, the word "if" used alone introduces the consequent of a condition. "only if" represents the antecedent.

Answers

In symbolizing truth-functional claims, the word "if" is used to introduce the consequent of a condition, while the phrase "only if" represents the antecedent.

Symbolizing truth-functional claims involves representing statements or propositions using logical symbols. When using the word "if" in a truth-functional claim, it typically introduces the consequent of a conditional statement. A conditional statement is a type of proposition that states that if one thing (the antecedent) is true, then another thing (the consequent) is also true. For example, the statement "If it is raining, then the ground is wet" can be symbolized as "p → q," where p represents "it is raining" and q represents "the ground is wet."

On the other hand, the phrase "only if" is used to represent the antecedent in a truth-functional claim. In a conditional statement using "only if," it states that if the consequent is true, then the antecedent must also be true. For example, the statement "The ground is wet only if it is raining" can be symbolized as "q → p," where p represents "it is raining" and q represents "the ground is wet."

In summary, when symbolizing truth-functional claims, the word "if" introduces the consequent of a condition, while the phrase "only if" represents the antecedent. These terms help express the relationships between propositions in logical statements.

Learn more about symbols here: https://brainly.com/question/30763849

#SPJ11

Prove that 7 |[3^(4n +1) −5^(2n−1)] for every positive integer n.

Answers

To prove that 7 divides the expression 3^(4n+1) - 5^(2n-1) for every positive integer n, we can use mathematical induction.

Base case: Let n = 1. Then,

3^(4n+1) - 5^(2n-1) = 3^(5) - 5^(1) = 243 - 5 = 238

Since 238 is divisible by 7, the base case holds true.

Inductive step: Assume that the statement is true for some arbitrary positive integer k, i.e.,

7 | [3^(4k+1) - 5^(2k-1)]

We need to show that the statement is also true for k+1.

We have,

3^(4(k+1)+1) - 5^(2(k+1)-1)

= 3^(4k+5) - 5^(2k+1)

= 3^4 * 3^(4k+1) - 25 * 5^(2k-1)

= 81 * 3^(4k+1) - 25 * 5^(2k-1)

= 7 * (9 * 3^(4k+1) - 5^(2k-1)) + 2 * 5^(2k-1)

Since 9 * 3^(4k+1) - 5^(2k-1) is an integer, and 2 * 5^(2k-1) is divisible by 7 (since 5^2 = 25 is congruent to 4 modulo 7), it follows that

7 | [3^(4(k+1)+1) - 5^(2(k+1)-1)]

Thus, by mathematical induction, the statement is true for all positive integers n.

To now more about mathematical induction, visit:

https://brainly.com/question/29503103

#SPJ11

A number cube of questionable fairness is rolled 100 times. The probability distribution shows the results. What is P(3≤x≤5) ? Enter your answer, as a decimal, in the box

Answers

The probability of getting a number between 3 and 5 (inclusive) is  P(3≤x≤5) is 1/600.

To find the probability of getting a number between 3 and 5 (inclusive) when rolling a number cube 100 times, we need to sum the probabilities of rolling a 3, 4, or 5 and divide it by the total number of rolls.

If the probability distribution is not provided, we cannot determine the exact probabilities for each number. However, assuming the number cube is fair, we can assign equal probabilities to each number from 1 to 6. In this case, the probability of rolling a 3, 4, or 5 would be 1/6 for each number.

Since we rolled the cube 100 times, the total number of rolls is 100. Therefore, the probability of getting a number between 3 and 5 (inclusive) is:

P(3≤x≤5) = (P(3) + P(4) + P(5)) / Total number of rolls

= (1/6 + 1/6 + 1/6) / 100

= 3/6 / 100

= 1/6 / 100

= 1/600

Therefore, P(3≤x≤5) is 1/600.

For such more questions on probability

https://brainly.com/question/23286309

#SPJ11

soccer fields vary in size. a large soccer field is 110 meters long and 90 meters wide. what are its dimensions in feet? (assume that 1 meter equals 3.281 feet. for each answer, enter a number.)

Answers

The dimensions of the large soccer field are 361 x 295.28 feet.

What are the dimensions of the large soccer field in feet?

To convert the dimensions of the large soccer field from meters to feet, we multiply each dimension by the conversion factor of 1 meter equals 3.281 feet.

Length conversion: The length of the soccer field is 110 meters. Multiply this by the conversion factor: 110 meters * 3.281 feet/meter = 361 feet.

Width conversion: The width of the soccer field is 90 meters. Multiply this by the conversion factor: 90 meters * 3.281 feet/meter = 295.28 feet.

Therefore, the large soccer field measures 361 feet long and 295.28 feet wide when converted to the imperial unit of feet.

By applying the conversion factor, we accurately express the field's dimensions in the desired measurement system.

Learn more about converting dimensions

brainly.com/question/29909084

#SPJ11

In complete sentences, explain the relationship between the sines and cosines of the two acute angles in right triangles. State the relationship and explain why that relationship exists

Answers

This relationship holds true for all right triangles and is a fundamental property of trigonometry.

The relationship between the sines and cosines of the two acute angles in right triangles is defined by the concept of trigonometric ratios. The sine of an angle is equal to the ratio of the length of the side opposite the angle to the hypotenuse, while the cosine of an angle is equal to the ratio of the length of the side adjacent to the angle to the hypotenuse. The relationship between the sines and cosines can be summarized as follows: the sine of an angle is equal to the cosine of its complement, and the cosine of an angle is equal to the sine of its complement.

This relationship exists because the two acute angles in a right triangle are complementary angles, meaning their sum is equal to 90 degrees. Since the hypotenuse is the longest side in a right triangle and is shared by both angles, the ratio of the length of the side opposite one angle to the hypotenuse is equal to the ratio of the length of the side adjacent to the other angle to the hypotenuse. Therefore, the sine of one angle is equal to the cosine of its complement, and the cosine of one angle is equal to the sine of its complement. This relationship holds true for all right triangles and is a fundamental property of trigonometry.

Learn more about trigonometric ratios here:

https://brainly.com/question/23130410

#SPJ11

If RS = 4 and RQ = 16, find the length of segment RP. Show your work. (4 points)

Answers

.Answer: Length of segment RP is greater than 3.

Given that RS = 4 and RQ = 16, we need to find the length of segment RP. Now, we have to consider a basic property of triangles that the sum of the lengths of any two sides of a triangle is always greater than the length of the third side. We apply the same rule in the triangle PRS, PQS and PQR.As per the above property, PR+RS>PS ⇒ PR+4>PS...

(1) PR+PQ>QR ⇒ PR+16>QR...

(2) PQ+QS>PS ⇒ PQ+8>PS..

(3)Adding equation 2 to equation 3, we get PR+PQ+16+8>PS+QR⇒PR+PQ+24>PS+QR....

(4)Adding equation 1 to equation 4, we get 2(PR+PQ+12)>30 ⇒ PR+PQ+12>15 ⇒ PR+PQ>3..

. (5)Now, we consider a triangle PQR. As per the above property, PR+QR>PQ ⇒ PR+QR>16⇒ PR>16-QR.....(6)Substituting equation (6) in equation (5), we get 16-QR+PQ>3 ⇒ PQ>QR-13We know that PQ=QS+PS And RS=4Therefore, QS+PS+4>QR-13 ⇒ QS+PS>QR-17.We also know that PQ+QS>PS ⇒ PQ>PS-QS. Substituting these values in QS+PS>QR-17, we get PQ+PS-QS>QR-17 ⇒ PQ+QS-17>QR-PS. Again, PQ+QS>16⇒ PQ>16-QSPutting this value in PQ+QS-17>QR-PS, we get 16-QS-17>QR-PS ⇒ QS+PS>3On simplifying we get PS>3-QSSince RS=4, we have PQ+PS>3 and RS=4Therefore, PQ+PS+4>7 ⇒ PQ+PS>3On solving the equations we get: PS>3-QSQR>16-QS PQ>16-PSFrom the above equations, we have PQ+PS>3Therefore, the length of segment RP is greater than 3. Hence, we can conclude that the length of segment RP is greater than 3

Know more about triangle  here:

https://brainly.com/question/10652623

#SPJ11

Final answer:

Without more information about how the segments are related, it's not possible to calculate the length of RP just from the lengths of RS and RQ.

Explanation:

The detailed information provided does not seem to relate directly to your question about finding the length of segment RP given the lengths of segments RS and RQ. Without additional information on the relationship between these segments (e.g., if they form a triangle or a straight line), it's not possible to calculate the length of RP directly from the given information. However, if RQ and RS are related in a certain way, such as the sides of a right triangle, we'd require the Pythagorean theorem or other geometric principles to find the length of RP.

Learn more about Geometry here:

https://brainly.com/question/31408211

#SPJ11

In order to compute a binomial probability we must know all of the following except: O a. the value of the random variable. Hob. the number of trials. c. the number of elements in the population. O d. the probability of success.

Answers

c. the number of elements in the population is not necessary to compute a binomial probability.

to know more about binomial , refer here :

https://brainly.com/question/13870395#

#SPJ11

Given the circle below with secants GHI and KJI. If HI = 48, JI = 46 and
KJ is 5 more than GH, find the length of GH. Round to the nearest tenth if
necessary.

Please also explain

Answers

The length of GH is 21 units.

How to find the length of GH?

The Secant-Secant Theorem states that "if two secant segments which share an endpoint outside of the circle, the product of one secant segment and its external segment is equal to the product of the other secant segment and its external segment".

Using the theorem above, we can say:

HI * GI = JI * KI

Since KJ is 5 more than GH, we can say:

KJ = GH + 5

KI = KJ + JI

KI = GH + 5 + 46 = GH + 51

From the figure:

GI = GH + HI

Substituting into:

HI * GI = JI * KI

HI * (GH + HI) = JI * (GH + 51)

48 * (GH + 48) = 46 * (GH + 51)

48GH + 2304 = 46GH + 2346

48GH - 46GH =  2346 - 2304

2GH = 42

GH = 42/2

GH = 21 units

Learn more about Secant-Secant Theorem on:

brainly.com/question/30242636

#SPJ1

Complete Question

Check attached image

a) Show that the set W of polynomials in P2 such that p(1)=0 is asubspace of P2.b)Make a conjecture about the dimension of Wc) confirm your conjecture by finding the basis for W

Answers

The basis for W is {x - 1, x^2 - 1}, and since there are two linearly independent polynomials, the dimension of W is 2, which confirms our conjecture.

a) To show that the set W of polynomials in P2 such that p(1) = 0 is a subspace of P2, we need to verify the three conditions for a subset to be a subspace:

The zero polynomial, denoted as 0, must be in W:

Let p(x) = ax^2 + bx + c be the zero polynomial. For p(1) = 0 to hold, we have:

p(1) = a(1)^2 + b(1) + c = a + b + c = 0.

Since a, b, and c are arbitrary coefficients, we can choose them such that a + b + c = 0. Thus, the zero polynomial is in W.

W must be closed under addition:

Let p(x) and q(x) be polynomials in W. We need to show that their sum, p(x) + q(x), is also in W.

Since p(1) = q(1) = 0, we have:

(p + q)(1) = p(1) + q(1) = 0 + 0 = 0.

Therefore, p(x) + q(x) satisfies the condition p(1) = 0 and is in W.

W must be closed under scalar multiplication:

Let p(x) be a polynomial in W and c be a scalar. We need to show that the scalar multiple, cp(x), is also in W.

Since p(1) = 0, we have:

(cp)(1) = c * p(1) = c * 0 = 0.

Thus, cp(x) satisfies the condition p(1) = 0 and is in W.

Since W satisfies all three conditions, it is indeed a subspace of P2.

b) Conjecture about the dimension of W:

The dimension of W can be conjectured by considering the degree of freedom available in constructing polynomials that satisfy p(1) = 0. Since p(1) = 0 implies that the constant term of the polynomial is zero, we have one degree of freedom for choosing the coefficients of x and x^2. Therefore, we can conjecture that the dimension of W is 2.

c) Confirming the conjecture by finding the basis for W:

To find the basis for W, we need to determine two linearly independent polynomials in W. We can construct polynomials as follows:

Let p1(x) = x - 1.

Let p2(x) = x^2 - 1.

To confirm that they are in W, we evaluate them at x = 1:

p1(1) = (1) - 1 = 0.

p2(1) = (1)^2 - 1 = 0.

Both p1(x) and p2(x) satisfy the condition p(1) = 0, and they are linearly independent because they have different powers of x.

Therefore, the basis for W is {x - 1, x^2 - 1}, and since there are two linearly independent polynomials, the dimension of W is 2, which confirms our conjecture.

To know more about polynomials refer to

https://brainly.com/question/11536910

#SPJ11

Find the difference between the maximum and minimum of the quantity x^(2)y^(2) / 13, where x and y are two nonnegative numbers such that x + y = 2. (Enter your answer as a fraction:)

Answers

The answer is 4/507.

Using AM-GM inequality, we have:

x^2y^2/13 = (x^2/13) (y^2/13) (169/169) ≤ ((x^2/13) + (y^2/13) + (169/169))/3 = (x^2 + y^2 + 169)/507

Since x + y = 2, we have x^2 + y^2 ≥ 2xy = 4 - 2y, so:

x^2 + y^2 + 169 ≥ 173 - 2y

Thus, x^2y^2/13 ≤ (173 - 2y)/507 for any nonnegative x and y with x + y =

2. This expression is a decreasing function of y, so its maximum value occurs at y = 0 and its minimum value occurs at y = 2. Thus:

Max: (173 - 2(0))/507 = 173/507

Min: (173 - 2(2))/507 = 169/507

The difference between these is:

173/507 - 169/507 = 4/507

So the answer is 4/507.

To know more about solving equations refer here:

https://brainly.com/question/30066982

#SPJ11

A radioactive decay series that begins with 23290Th ends with formation of the stable nuclide 20882Pb.
Part A
How many alpha-particle emissions and how many beta-particle emissions are involved in the sequence of radioactive decays?

Answers

In the given decay series, there are a total of 6 alpha-particle emissions, each resulting in a decrease of 4 in the atomic number and 4 in the mass number, and 4 beta-particle emissions, each resulting in a change in the atomic number but no change in the mass number.

In the radioactive decay series that begins with 23290Th and ends with 20882Pb, a total of 6 alpha-particle emissions and 4 beta-particle emissions are involved.

The decay series can be summarized as follows:

23290Th → 22888Ra → 22486Rn → 22084Po → 21682Pb → 21280Hg → 21281Tl (beta decay) → 20882Pb

In each alpha decay, an alpha particle (which consists of two protons and two neutrons) is emitted from the nucleus, resulting in a decrease of 4 in the atomic number and a decrease of 4 in the mass number.

In each beta decay, a beta particle (which is either an electron or a positron) is emitted from the nucleus, resulting in a change in the atomic number but no change in the mass number.

For such more questions on Decay series:

https://brainly.com/question/15564068

#SPJ11

The decay series can be represented as follows:

23290Th → 22888Ra → 22889Ac → 22486Rn → 22084Po → 21682Pb → 21280Hg → 21281Tl → 20882Pb

In this decay series, alpha-particle emissions occur at each step except for the decay of 22889Ac to 22486Rn, which involves the emission of a beta particle. Therefore, there are a total of 7 alpha-particle emissions and 1 beta-particle emission involved in the sequence of radioactive decays.

Know more about decay series here:

https://brainly.com/question/31868853

#SPJ11

A car wash gives every 5th custmer a free tire wash and every 8th custermer. A free coffe mug. Which customer will be the firstt to recive both a free tire wash and free coffe mug

Answers

The first customer to  receive both a free tire wash and free coffee mug is customer 40.

In order to determine the first customer to receive both a free tire wash and free coffee mug, we need to find the lowest common multiple (LCM) of 5 and 8.

Using prime factorization method,let's find the prime factors of 5 and 8: 5 = 5 and 8 = 2 * 2 * 2

Therefore, LCM of 5 and 8 is LCM (5,8) = 2 * 2 * 2 * 5 = 40.

So the first customer to receive both a free tire wash and free coffee mug is the 40th customer.

Now let's verify this answer :

Customer 5, 10, 15, 20, 25, 30, 35, 40 will receive a free tire wash.

Customer 8, 16, 24, 32, 40 will receive a free coffee mug.

The first customer to receive both will be customer 40 since they are the first customer to satisfy both conditions of the problem.

To know more about lowest common multiple visit :

https://brainly.com/question/233244

#SPJ11

Following the beginning of the lecture, define the area function A(z) under y = t4 between the lines t = 2 and t = x. Sketch a proper graph. Explain and find the formula for A(x).

Answers

The area function A(x) under y = t⁴ between the lines t = 2 and t = x is given by A(x) = ∫[2,x] t⁴ dt.

How to find the area?

The area function A(x) represents the area under the curve y = t⁴ between the lines t = 2 and t = x.

To find the formula for A(x), we integrate the function y = t⁴ with respect to t over the interval [2, x].

We start by calculating the definite integral of t⁴ with respect to t:

∫[2,x] t⁴ dt = [(1/5) * t⁵] evaluated from 2 to x

= (1/5) * x⁵ - (1/5) * 2⁵

= (1/5) * x⁵ - 32/5

Therefore, the formula for the area function A(x) is given by A(x) = (1/5) * x⁵- 32/5.

Learn more about area

brainly.com/question/1631786

#SPJ11

A and B belong to X. C and D belong to Y. Proof that :

(A ∩ B) × (C ∩ D) = (A × C) ∩ (B × D)

Answers

We have shown that (A ∩ B) × (C ∩ D) is a subset of (A × C) ∩ (B × D), and (A × C) ∩ (B × D) is a subset of (A ∩ B) × (C ∩ D). This establishes the equality: (A ∩ B) × (C ∩ D) = (A × C) ∩ (B × D)

To prove the equality (A ∩ B) × (C ∩ D) = (A × C) ∩ (B × D), we need to show that each side is a subset of the other.

First, let's take an arbitrary element (x, y) from the set (A ∩ B) × (C ∩ D).

(x, y) ∈ (A ∩ B) × (C ∩ D)

This means that x ∈ A ∩ B and y ∈ C ∩ D. By the definition of set intersection, this implies:

x ∈ A and x ∈ B

y ∈ C and y ∈ D

Now, let's consider the set (A × C) ∩ (B × D) and show that (x, y) is also an element of this set.

(x, y) ∈ (A × C) ∩ (B × D)

This means that x ∈ A × C and x ∈ B × D. By the definition of Cartesian product, this implies:

x = (a, c) for some a ∈ A and c ∈ C

x = (b, d) for some b ∈ B and d ∈ D

Since x has two different representations, we can conclude that (a, c) = (b, d). Thus, a = b and c = d.

Therefore, (a, c) = (b, d) is an element of both A × C and B × D. Thus, (x, y) = (a, c) = (b, d) is an element of their intersection, (A × C) ∩ (B × D).

Since (x, y) is an arbitrary element of (A ∩ B) × (C ∩ D), and we have shown that it is also an element of (A × C) ∩ (B × D), we can conclude that (A ∩ B) × (C ∩ D) is a subset of (A × C) ∩ (B × D).

To show the reverse inclusion, we need to take an arbitrary element (x, y) from the set (A × C) ∩ (B × D) and prove that it is also an element of (A ∩ B) × (C ∩ D). The proof follows a similar logic as above but in the reverse direction.

Therefore, we have shown that (A ∩ B) × (C ∩ D) is a subset of (A × C) ∩ (B × D), and (A × C) ∩ (B × D) is a subset of (A ∩ B) × (C ∩ D). This establishes the equality:

(A ∩ B) × (C ∩ D) = (A × C) ∩ (B × D)

Learn more about Cartesian product here:

https://brainly.com/question/22989508

#SPJ11

Other Questions
12. Scout ends the chapter with the words, "...I never figured out how Atticus knew Iwas listening, and it was not until many years later that I realized he wanted me tohear every word he said." Why do you think Atticus wanted Scout to hear what hesaid during his conversation with Uncle Jack? The bond length in the fluorine molecule F2 is 1.28 A, what is the atomic radius of chlorine?a. 0.77 Ab. 0.64 Ac. 0.22 Ad. 1.21 A pension administration and payroll are most likely to be outsourced, since they are ________ activities. when the tax laws change, which rate is used to value deferred tax assets and liabilities? Which was the minimum capital requirement for market risk in the 1996 BIS Amendment? A. At least 2 times 5-day VaR with a 95% confidence levelB. At least 3 times 7-day VaR with a 97% confidence level C. At least 3 times the 10-day VaR with a 99% confidence level D. 1-day VaR with a 99% confidence level (1 point) evaluate the surface integral s(2yj zk)ds. where s consists of the paraboloid y=x2 z2,0y1 and the disk x2 z21,y=1, and has outward orientation. Which of the following statements regarding consolidation of a VIE with its primary beneficiary is true?A) The consolidation of a VIE with its primary beneficiary requires the business enterprise to follow a separate process than the one required for consolidations based on voting interests.B) All intra-entity transactions between the primary beneficiary and the VIE are included in the consolidation.C) Only intra-entity transactions between the primary beneficiary and the VIE resulting from intra-entity transfers are eliminated in the consolidation.D) VIEs with controlling interests must include one hundred percent of the primary beneficiary's net income in a consolidation.E) The allocation of the VIE's net income is based on an analysis of the underlying contractual arrangements between the primary beneficiary and other holders of variable interests. Which of the following is not one of the determinants of productivity in the Neo-Classical theory of the labor market?A efficiency wagesB technologyC Machinery and resourcesD training In an atom, how many electrons can have the quantum number designations n=3, ml=0, ms=1/2? both the copy constructor and the assignment operator should make Historically, most international businesses have been more concerned with training than with management development, focusing on preparing home-country nationals for foreign postingstrue/false complete combustion of 8.90 g of a hydrocarbon produced 27.0 g of co2 and 13.8 g of h2o. what is the empirical formula for the hydrocarbon? insert subscripts as necessary. in general, jobs are designed to accomplish organizational goals by using which of the following methods select one: a. motivation and rewards b. efficiency and standardization c. motivation and ability d. efficiency and effectiveness e. motivation and efficiency The state of plane strain on an element is x = -270(10-6), y = 0, xy = 150(10-6). Determine the equivalent state of strain which represents the principal strains, and the maximum in-plane shear strain and the associated average normal strain. Specify the orientation of the corresponding elements for these states of strain with respect to the original element. (Figure 1)Part APart completeDetermine the orientations of the element at which the principal strains occur.Express your answers using three significant figures separated by a comma.p1, p2 =-14.5,75.5SubmitPrevious AnswersCorrectPart BDetermine the normal strain x of the element with orientation p = -14.5 .Express your answer using three significant figures.x =nothingSubmitRequest AnswerPart CDetermine the normal strain y of the element with orientation p = -14.5 .Express your answer using three significant figures.y =nothingSubmitRequest AnswerPart DPart completeDetermine the shear strain xy of the element with orientation p = -14.5 .Express your answer using six decimal places.xy =0SubmitPrevious AnswersCorrectPart EPart completeDetermine the orientations of the element at which the maximum in-plain shear strain occurs.Express your answers using three significant figures separated by a comma.s1, s2 =30.5,120SubmitPrevious AnswersCorrectPart FDetermine the normal strain x of the element with orientation s = 30.5 .Express your answer using three significant figures.x =nothingSubmitRequest AnswerPart GDetermine the normal strain y of the element with orientation s = 30.5 .Express your answer using three significant figures.y =nothingSubmitRequest AnswerPart HDetermine the shear strain xy of the element with orientation s = 30.5 .Express your answer using three significant figures.xy =nothingSubmitPrevious AnswersRequest Answer Consider the titration of a 60.0 mL of 0.317 M weak acid HA (Ka = 4.2 x 10) with 0.400 M KOH. What is the pH before any base has been added? Consider the titration of a 60.0 mL of 0.317 M weak acid HA (Ka = 4.2 x 10) with 0.400 M KOH. After 30.0 mL of KOH have been added, what would the pH of the solution be? Consider the titration of a 60.0 mL of 0.317 M weak acid HA (Ka = 4.2 x 10) with 0.400 M KOH. After 75.0 mL of KOH have been added, what would the pH of the solution be? An overhead transmission cable for electrical power is 2000 m long and consists of two parallel copper wires, each encased in insulating material. A short circuit has developed somewhere along the length of the cable where the insulation has worn thin and the two wires are in contact. As a power-company employee, you must locate the short so that repair crews can be sent to that location. Both ends of the cable have been disconnected from the power grid. At one end of the cable (point A), you connect the ends of the two wires to a 9. 00-V battery that has negligible internal resistance and measure that 2. 26 A of current flows through the battery. At the other end of the cable (point B), you attach those two wires to the battery and measure that 2. 05 A of current flows through the battery. Required:How far is the short from point A? the creation of props used in a show falls under the responsibility of the ______________ designer. group of answer choices lighting sound costume scene An infinitely long, straight, cylindrical wire of radius RR has a uniform current density J=J^zJ=Jz^ in cylindrical coordinates.Cross-sectional viewSide viewWhat is the magnitude of the magnetic field at some point inside the wire at a distance riB=B=Assuming JJ is positive, what is the direction of the magnetic field at some point inside the wire?positive zzdirectionnegative zzdirectionpositive rrdirectionnegative rrdirectionpositive directionnegative direction 49) what region does the superior cervical ganglion serve? a) abdominal b) pelvic c) heart d) head e) none of the choices are correct Genuine Spice Inc. Began operations on January 1 of the current year. The company produces 8-ounce bottles of hand and body lotion called Eternal Beauty. The lotion is sold wholesale in 12-bottle cases for $100 per case. There is a selling commission of $20 per case. The January direct materials, direct labor, and factory overhead costs are as follows:DIRECT MATERIALS Cost Behavior Units per Case Cost per Unit Cost per CaseCream base Variable 100 ozs. $0. 02 $ 2. 00Natural oils Variable 30 ozs. 0. 30 9. 00Bottle (8-oz. ) Variable 12 bottles 0. 50 6. 00 $17. 00DIRECT LABORDepartment Cost Behavior Time per Case Labor Rate per Hour Cost per CaseMixing Variable 20 min $18. 00 $6. 00Filling Variable 5 14. 40 1. 20 25 min. $7. 20FACTORY OVERHEAD Cost Behavior Total CostUtilities Mixed $600Facility lease Fixed 14,000Equipment depreciation Fixed 4,300Supplies Fixed 660 $19,560The management of Genuine Spice Inc. Wishes to determine thenumber of cases required to break even per month. The utilitiescost, which is part of factory overhead, is a mixed cost. Thefollowing information was gathered from the first six months ofoperation regarding this cost:2016 CaseProduction Utility Total CostJanuary 500 $600February 800 660March 1,200 740April 1,100 720May 950 690June 1,025 705Required:1. Determine the fixed andvariable portion of the utility cost using the high-lowmethod. 2. Determine the contributionmargin per case. 3. Determine the fixed costs permonth, including the utility fixed cost from part (1). 4. Determine the break-even numberof cases per month