What is 0.1 in exponent form

Answer:

Step-by-step explanation:

The formula for the circumference of a circle is C = 2πr, where r is the radius of the circle. Solving for the radius, we have:

r = C/(2π) = 50.24/(2π) ≈ 8

So the radius of the circle is approximately 8 units.

The formula for the area of a circle is A = πr^2, so we have:

A = π(8)^2 = 64π ≈ 201.06

Therefore, the area of the circle is approximately 201.06 square units.

We show that at n = 1 the basis step works, but the inductive step fails.

Let consider the Inequality

[tex]\frac{1}{2}\cdot\frac{3}{4}\dots\dots\frac{2n-1}{2n} < \frac{1}{\sqrt{3n}}[/tex]

We must demonstrate that while the fundamental step of mathematical induction proves the aforementioned inequality, the inductive step does not.

Mathematical induction is a method of proof used in mathematics to prove that a statement is true for all natural numbers.

It involves proving that a statement holds true for a base case (typically zero or one), and then proving that, if it holds true for any given natural number, it must also hold true for the next natural number.

This process is repeated until the statement has been shown to be true for all natural numbers.

Basic Step: n = 1

1/2 < 1/√3, which is true.

Hence we proved that at n = 1  the basic steps of mathematical induction works.

To learn more about mathematical induction link is here

brainly.com/question/30893280

#SPJ4

The complete question is:

Suppose that we want to prove that

[tex]\frac{1}{2}\cdot\frac{3}{4}\dots\dots\frac{2n-1}{2n} < \frac{1}{\sqrt{3n}}[/tex]

for all positive integers n.

Show that if we try to prove this inequality using mathematical induction, the basis step works, but the inductive step fails.

The local tide measurement data contradict the satellite data because the number of decreasing local sea level trends is greater than the number of increasing local sea level trends. So correct option is C.

Measuring tides involves observing and recording changes in the water level of oceans, seas, and other bodies of water over time. Tides are caused by the gravitational pull of the moon and sun on the Earth's water, which results in a rhythmic rise and fall of water levels.

Tide measurements are important for a variety of reasons, including understanding ocean circulation, predicting flooding and storm surges, and planning shipping routes. Tidal data is also used in climate research, as changes in sea level can indicate long-term climate trends.

The local tide measurement data contradict the satellite data because the number of decreasing local sea level trends is greater than the number of increasing local sea level trends.

The measurement is done because the land surfaces are dynamic with some locations rising or sinking relative to sea level changes are different across world coasts.

Therefore, the Option C is correct.

To know more about data visit:

https://brainly.com/question/28852140

#SPJ1

The complete question is:

Answer:

Step-by-step explanation:

[tex]tanx=\frac{15}{18}[/tex]     (tan is opposite/adjacent     SOHCAHTOA)

[tex]x=tan^{-1}(\frac{15}{18}) = 39.8[/tex]

Answer:

Step-by-step explanation:

[tex]\frac{30\sqrt{2^{4n-2} +2^{4n+1} } }{(3^{n} +3^{n+1} )^2} \\=\frac{30\sqrt{2^{4n} *2^{-2} +2^{4n} *2^{1} } }{3^{2n} (1+3^{1}) } \\=\frac{30*2^{2n} \sqrt{\frac{1}{2^{2} }+2 } }{4*3^{2n} } \\=\frac{30*2^{2n}*\frac{3}{2} }{4*3^{2n} } \\=\frac{45(2^{2} )^{n} }{4(3^{2} )^{n} } \\=\frac{45}{4} *(\frac{4}{9} )^{n} \\[/tex]

it is a G.P. with common ratio r=4/9 <1

[tex]s=\frac{a}{1-r} ,a=first~term\\s=\frac{\frac{45}{4} *(\frac{16}{81} )}{1-\frac{4}{9} } [by~n=2]\\s=\frac{20}{9} *\frac{9}{5} \\=4[/tex]

Answer:

-2 squared+3+1=0

I hope it helps

The quadratic function that best matches the provided data is as follows: y = -9.38x2 - 74.8x + 186.1 with a 1594.61 squared difference total.

A function in mathematics is a connection between two groups of numbers, known as the domain and the range, where each element in the domain has a unique relationship with each element in the range. The range is the set of possible output values that the function can generate, and the domain is the set of input values for which the function is defined. Algebraic expressions or formulas that explain how the output values are arrived at based on the input values are frequently used to depict functions.

given

The greatest fit will be determined by the function with the smallest sum of squared differences.

The outcome is as follows after computing the sums of squared differences for each function:

Sum of squared differences for y = 9.38x2 + 74.8x + 186.1 is 406.27.

Sum of squared differences for y = -9.38x2 + 74.8x + 186.1 is 406.27.

Sum of squared differences for y = 9.38x2 + 274.8x + 186.1 is 18681.95.

sum of squared disparities is 1594.61 when y = -9.38x2 - 74.8x + 186.1.

The quadratic function that best matches the provided data is as follows: y = -9.38x2 - 74.8x + 186.1 with a 1594.61 squared difference total.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

Answer: The sale price of the dress is $45.

Step-by-step explanation:

To find the discount rate, we need to calculate the amount of the discount first. Since the dress is on sale for 25% off, the discount amount is:

Discount = 25% x $60 = $15

The discount rate is then calculated by dividing the discount amount by the original price of the dress and multiplying by 100:

Discount rate = ($15 / $60) x 100% = 25%

To find the sale price of the dress, we need to subtract the discount amount from the original price:

Sale price = $60 - $15 = $45

Therefore, the sale price of the dress is $45.

the correct options are A), B), and E).

why it is and what is Gallon?

A) 2 quarts = 8 cups

B) 8 cm = 80mm

E) 96 inches = 8 feet

The number 8 cannot correctly fill in the blank for statements C and D.

C) 1 gallon = 16 cups, so 4 gallons = 64 cups, not 8 cups.

D) 1 hour = 60 minutes, so 96 minutes = 1 hour and 36 minutes, not 8 hours.

Therefore, the correct answers are A), B), and E).

A gallon is a unit of measurement for volume commonly used in the United States and some other countries. There are two different sizes of gallons: the US gallon and the imperial gallon.

The US gallon is defined as exactly 3.785411784 liters, and is used for measuring liquids such as gasoline, milk, and other beverages.

The imperial gallon, which is used in the United Kingdom and some other countries, is defined as exactly 4.54609 liters.

In both cases, a gallon is typically divided into smaller units such as quarts, pints, and fluid ounces for measuring smaller amounts of liquid.

To know more about Filling related questions, visit:

https://brainly.com/question/29555029

#SPJ1

The parameter an in the Lotka-Volterra predator-prey model denotes the capture efficiency (alpha).

The lotka-Volterra predator-prey model is what.

The Lotka-Volterra model makes the assumption that a predator's rate of prey consumption is inversely related to its abundance.

The parameter an in the Lotka-Volterra predator-prey model denotes the capture efficiency (alpha).

In conclusion, the lotka-volterra predator-prey model aids in estimating the rate at which prey is consumed.

We possess that

The predator population is x.

y is the number of prey.

The dy/dt equation contains the coefficient c. Hence, this coefficient is correlated with the prey population. The presence of a minus sign indicates a decline in the population of prey. It multiplies x as well, indicating a connection to the predator population.

To know more about Lotka-Volterra , click the below link

https://brainly.com/question/14255455

#SPJ4

Answer:

200 lbs.

Step-by-step explanation:

Divide mass value by 16 to convert oz to lbs.

3,200/16=200

a) The value of Hy = 1.15

b) The proportion of cartons with less than 1.15 broken eggs is 0.60

c) The answer is B)This computation of the mean is incorrect because it does not take into account that the number of broken eggs are not all equally like.

(a) Hy = 0.67, which means that on average, there are 0.67 broken eggs per carton.

Hy = (0*0.60 + 1*0.20 + 2*0.15 + 3*0.03 + 4*0.02)/1

= 0.67

(b) The proportion of cartons with less than 0.67 broken eggs is 0.60 which is probability of 0 broken eggs.. This may be surprising as the probability of having less than 0.67 broken eggs is only 0.60, but this is due to the fact that the distribution is skewed towards higher values.

(c) Hy is not equal to the simple average of 0, 1, 2, 3, and 4 because the distribution is not symmetrical. The probabilities are weighted towards higher values, which increases the mean. Additionally, the value of zero should be included in the calculation, as it represents a possible outcome. Therefore, the correct formula for Hy is (0*0.60 + 1*0.20 + 2*0.15 + 3*0.03 + 4*0.02)/1 = 0.67.

To know more on symmetrical distribution

https://brainly.com/question/31184447

#SPJ4

--The question is incomplete, answering to the question below--

"Let y denote the number of broken eggs in a randomly selected carton of one dozen eggs.

y 0 1 2 3 4

p(y) 0.60 0.20 0.15 0.03 0.02

(a) Calculate and interpret Hy  

(b) In the long run, for what proportion of cartons is the number of broken eggs less than Hy? (Round your answer to two decimal places).

Does this surprise you?

Yes

No

(c) Explain why Hy is not equal to (0 + 1 + 2 + 3 + 4)/5 = 2.0.  

A. This computation of the mean is incorrect because the value in the denominator should equal the maximum y value.

B. This computation of the mean is incorrect because it does not take into account that the number of broken eggs are not all equally like

C. This computation of the mean is incorrect because it includes zero in the numerator which should not be taken into account when

D. This computation of the mean is incorrect because it does not take into account the number of partially broken eggs."

Answer:

g(x) = 1/2|x - 1| + 2

Step-by-step explanation:

You were almost there, you just got the slope wrong.  

original vertex (h, k): (0, 0)

transformed vertex (h', k'): (1, 2)

original slope:  1

transformed slope: m = (3-2)/(3-1) = 1/2    pick any 2 points to find the slope

equation for the transformed function shown in the graph:

g(x) = 1/2|x - h'| + k'

g(x) = 1/2|x - 1| + 2

The given prescription lacks important information about the frequency and route of administration. Knowing how often a medication should be taken and how it should be administered is crucial for ensuring that patients receive the appropriate dose and achieve the desired therapeutic effect.

Without the frequency information of how (e.g., orally, intravenously, etc.) and when  (e.g., daily, twice daily, etc.)  to take medicine on prescription, patients may take the medication incorrectly or miss doses, potentially leading to ineffective treatment or adverse effects.

Healthcare providers should always provide clear and complete instructions for medication use to ensure patient safety and optimal treatment outcomes.

To know more about prescription:

https://brainly.com/question/24487429

#SPJ4

Answer:

g(x)

=6x−4

=3x

2

−2x−10

Escribe (g∘f)(x) como una expresión en términos de x.

Step-by-step explanation:

Primero necesitamos conocer la función f(x). Luego podemos sustituir f(x) en g(x) para obtener (g∘f)(x).

Como la función f(x) no se proporcionó en la pregunta, asumiré que f(x) es:

f(x) = x^2 - 2x + 1

Entonces, podemos sustituir f(x) en g(x) de la siguiente manera:

g(f(x)) = 6f(x) - 4

= 6(x^2 - 2x + 1) - 4 (sustituyendo f(x))

= 6x^2 - 12x + 2

Por lo tanto, (g∘f)(x) = 6x^2 - 12x + 2.

Answer:

u8hiuhihihoiho'hjoihuiytrdeee

Step-by-step explanation:

Answer:

Step-by-step explanation:

Given,

Let length be x and breadth (x - 5).

Perimeter of rectangle is calculated by :

[tex] \: \: \boxed{ \pmb{ \sf{Perimeter_{(rectangle)} = 2(l + b)}}} \\ [/tex]

On substituting the values we get :

[tex]\dashrightarrow \: \: 130 = 2(x + x - 5) \\ [/tex]

[tex]\dashrightarrow \: \: 130 = 2(2x - 5) \\ [/tex]

[tex]\dashrightarrow \: \dfrac{130}{2} = (2x - 5) \\ [/tex]

[tex]\dashrightarrow \: \: 65 = 2x - 5 \\ [/tex]

[tex]\dashrightarrow \: \: 65 + 5 = 2x \\ [/tex]

[tex]\dashrightarrow \: \: 70 = 2x \\ [/tex]

[tex]\dashrightarrow \: \: \frac{70}{2} = x \\ [/tex]

[tex]\dashrightarrow \: \: 35 = x \\ [/tex]

Hence,

Answer:

Step-by-step explanation:

By choosing the LIFO method for inventory, the following items would be decreased (compared to what would have happened if they chose to use FIFO):

Net income

Taxes payable

Total assets

Owner's equity

This is because the LIFO method results in higher cost of goods sold and lower ending inventory, which in turn decreases net income and taxes payable. Lower ending inventory also decreases total assets and owner's equity.

The items that would be decreased by the choice of LIFO (compared to what would have happened if they chose to use FIFO) are Ending inventory and Net profit

The unitary method is a method for solving a problem by the first value of a single unit and then finding the value by multiplying the single value. Unitary method is a technique by which we find the value of a single unit from the value of multiple devices and the value of more than one unit from the value of a single unit. It is a method that we use for most of the calculations in math.

We are given that;

Inventory costs in 2012 were rising

Now,

LIFO stands for last-in, first-out, and FIFO stands for first-in, first-out. These are two ways of assigning costs to the units of inventory that you sell. FIFO assumes that you sell the oldest units first, while LIFO assumes that you sell the newest units first1.

The choice of LIFO or FIFO has implications on a company’s financial statements as this decision impacts the value of inventory, cost of goods sold, and net profit2. If inventory costs are rising during a period, then LIFO will result in a lower value of ending inventory, a higher cost of goods sold, and a lower net profit compared to FIFO1.

Therefore, by unitary method the answer will be Ending inventory and Net profit

Learn more about the unitary method, please visit the link given below;

https://brainly.com/question/23423168

#SPJ2

Answer:

Step-by-step explanation:

We can use the distributive property and FOIL method to multiply these two complex numbers:

(-4 + i)(2 - 3i) = -4(2) + (-4)(-3i) + (i)(2) + (i)(-3i)

Simplifying each term, we get:

(-4 + i)(2 - 3i) = -8 + 12i + 2i - 3i^2

Since i^2 = -1, we can replace it with -1:

(-4 + i)(2 - 3i) = -8 + 12i + 2i - 3(-1)

Simplifying further, we get:

(-4 + i)(2 - 3i) = -5 + 14i

Therefore, the product of (-4 + i) and (2 - 3i) is -5 + 14i.

The length of the base of the triangle is 8 yards.

The formula for calculating a triangle's area is

A = 1/2 * base * height,

where A represents the triangle's area, base its base length, and height its height measured perpendicularly from base to top.

Given that, height of triangle is half of 28 yards and an area of 56 sq. yards.

The area of triangle is given as:

A = 1/2 * base * height

Substitute the value of h = 1/2 (28) = 14 yards, and area = 56.

56 = 1/2 * base * 14

base = 56(2) / 14

base = 8 yards

Hence, the length of the base of the triangle is 8 yards.

Learn more about area of triangle here:

https://brainly.com/question/19305981

#SPJ1

In response to the stated question, we may state that Therefore, the trigonometry exact values of sin(u), cos(u), sin(2u), and cos(2u) are 4/5, 3/5, 24/25, and -7/25, respectively. The exact value of sin(t/2) is 2√5 / 5.

The study of the connection between triangle side lengths and angles is known as trigonometry. The concept first originated in the Hellenistic era, during the third century BC, due to the application of geometry in astronomical investigations. The subject of mathematics known as exact techniques deals with certain trigonometric functions and their possible applications in calculations. There are six commonly used trigonometric functions in trigonometry. Sine, cosine, tangent, cotangent, secant, and cosecant are their separate names and acronyms (csc). The study of triangle characteristics, particularly those of right triangles, is known as trigonometry. As a result, geometry is the study of the properties of all geometric forms.

Using the given triangle, we can find the values of sin(u), cos(u), and tan(u) as follows:

sin(u) = opposite / hypotenuse = 4 / 5

cos(u) = adjacent / hypotenuse = 3 / 5

tan(u) = opposite / adjacent = 4 / 3

To find the values of sin(2u) and cos(2u), we can use the double angle formulas:

[tex]sin(2u) = 2 sin(u) cos(u)\\cos(2u) = cos^2(u) - sin^2(u)\\sin(2u) = 2 (4/5) (3/5) = 24/25\\cos(2u) = (3/5)^2 - (4/5)^2 = -7/25[/tex]

sin(t/2) = ± [tex]\sqrt((1 - cos(t)) / 2)[/tex]

We need to determine the sign of the square root based on the quadrant in which t/2 lies. Since 7t/2 is in the second quadrant (between pi and 3pi/2), t/2 is in the second quadrant as well (between pi/2 and pi). In the second quadrant, sine is positive and cosine is negative. Therefore, we take the positive square root:

[tex]sin(t/2) = \sqrt((1 - cos(t)) / 2)\\= \sqrt((1 - (-3/5)) / 2)\\= \sqrt(8/10)\\= \sqrt(4/5)\\[/tex]

= 2/√5

= 2√5 / 5

Therefore, the exact values of sin(u), cos(u), sin(2u), and cos(2u) are 4/5, 3/5, 24/25, and -7/25, respectively. The exact value of sin(t/2) is 2√5 / 5.

To know more about trigonometry visit:

https://brainly.com/question/29002217

#SPJ1

Where F_pivot is the magnitude of the force exerted on the pivot point.

What are perpendicular lines?

Perpendicular lines are lines that intersect at a right angle (90 degrees). In other words, if you draw a line perpendicular to another line, the two lines will form four right angles at the point where they intersect.

(a) The torque applied by the adult rider (on the left) can be calculated as the product of the force applied by the rider and the perpendicular distance from the pivot to the force. Let F_a be the force applied by the adult rider and let r_a be the perpendicular distance from the pivot to the force. Then, the torque applied by the adult rider is:

τ_a = F_a * r_a

The perpendicular distance r_a can be calculated using the Pythagorean theorem:

r_a = sqrt((L/2 - d)^2 + Xoffset^2)

Therefore, the torque applied by the adult rider is:

τ_a = F_a * sqrt((L/2 - d)^2 + Xoffset^2)

(b) Similarly, the torque applied by the child rider (on the right) can be calculated as:

τ_c = F_c * sqrt((L/2 + d)^2 + Xoffset^2)

where F_c is the force applied by the child rider and r_c is the perpendicular distance from the pivot to the force, which can be calculated using the Pythagorean theorem.

(c) The torque applied by the board can be calculated as the sum of the torques applied by the two riders:

τ_b = τ_a + τ_c

Substituting the expressions for τ_a and τ_c, we get:

τ_b = F_a * sqrt((L/2 - d)^2 + Xoffset^2) + F_c * sqrt((L/2 + d)^2 + Xoffset^2)

(d) To determine the distance d in terms of given quantities and variables, we can use the condition for static equilibrium, which requires that the sum of the torques about the pivot point is zero:

τ_a + τ_c = 0

Substituting the expressions for τ_a and τ_c and simplifying, we get:

F_a * (L/2 - d) = F_c * (L/2 + d)

Solving for d, we get:

d = (F_a/F_c - 1) * L/4

Substituting F_a = Mg and F_c = mg, where M is the mass of the adult rider, m is the mass of the child rider, and g is the acceleration due to gravity, we get:

d = (M/m - 1) * L/4

(e) The magnitude of the force exerted on the pivot point by the see-saw while in use can be calculated using the condition for static equilibrium, which requires that the sum of the forces in the vertical direction is zero:

F_a + F_c = Mg + mg

Substituting F_a = Mg and F_c = mg, we get:

F_pivot = Mg + mg

Therefore, where F_pivot is the magnitude of the force exerted on the pivot point.

To learn more about perpendicular line from the given link:

https://brainly.com/question/29268451

#SPJ1

Let X and Y be independent random variables, uniformly distributed in the interval [0, 1 ]. The CDF of X - Y is FZ(z) = (1/2)(1+z)^2 for -1 ≤ z ≤ 0, 1 - (1/2)(1-z)^2 for 0 ≤ z ≤ 1, 0 for z < -1 or z > 1. The PDF of X - Y is fZ(z) = z + 1 for -1 < z < 0, 1 - z for 0 < z < 1, 0 otherwise.

To find the CDF of X - Y, we first note that the range of X - Y is [0, 1]. Let Z = X - Y, then:

FZ(z) = P(Z ≤ z) = P(X - Y ≤ z)

We can write this as an integral over the joint distribution of X and Y:

FZ(z) = ∫∫[X - Y ≤ z] fXY(x, y) dx dy

Since X and Y are independent, the joint distribution is simply the product of their marginal distributions:

fXY(x, y) = fX(x) fY(y) = 1 * 1 = 1

for 0 ≤ x, y ≤ 1.

Thus, we have:

FZ(z) = ∫∫[X - Y ≤ z] dx dy

= ∫∫[Y ≤ X - z] dx dy

= ∫0^1 ∫0^(x-z) 1 dy dx + ∫0^1 ∫(x-z)^1 1 dy dx

= ∫0^(1+z) (1-z) dx

= (1/2)(1+z)^2 for -1 ≤ z ≤ 0

= 1 - (1/2)(1-z)^2 for 0 ≤ z ≤ 1

Therefore, the CDF of X - Y is:

FZ(z) =

(1/2)(1+z)^2 for -1 ≤ z ≤ 0

1 - (1/2)(1-z)^2 for 0 ≤ z ≤ 1

0 for z < -1 or z > 1

To find the PDF of X - Y, we differentiate the CDF:

fZ(z) = dFZ(z)/dz =

z + 1 for -1 < z < 0

1 - z for 0 < z < 1

0 otherwise

Therefore, the PDF of X - Y is:

fZ(z) =

z + 1 for -1 < z < 0

1 - z for 0 < z < 1

0 otherwise

To know more about CDF and PDF:

https://brainly.com/question/31140093

#SPJ4

Answer:

15.8823% error

Step-by-step explanation:

Percent Error Formula

abs([tex]\frac{(a-x)}{x}[/tex]) * 100%

abs:  absolute value

a:  actual value

x:  expected value

Percent Error = abs([tex]\frac{14.3 - 17}{17}[/tex]) * 100%

                       = abs(-0.158823) * 100%

                       15.8823% error

√9+25 = 28

π-4 = -0.8571

³√-27 = -3

2 / 3 = 0.6667

18÷2 = 9

√-27​ = 5.196

In mathematics, a surd is a term used to describe an irrational number that is expressed as the root of an integer. Specifically, a surd is a number that cannot be expressed exactly as a fraction of two integers, and is usually written in the form of a radical (e.g. √2, √3, √5, etc.).

We have √9+25 = 28

find the square root of 9 = 3

3 + 25 = 28

π-4 = 3.14 - 4

= -0.8571

³√-27 = ³√3³

= 3

2÷3 = 0.6667

18÷2 = 9

Read more on surds here:https://brainly.com/question/840021

#SPJ1

question:

given :√9+25 : π-4 : ³√-27 : 2÷3 : 18÷2 : √-27​

find the value of the terms

The probability that at least 3 minutes will elapse before the next telephone order is 0.797.

The probability that less than 15 minutes will elapse between orders is 0.677.

The probability that between 15 and 30 minutes will elapse between orders is 0.2275

To solve the following problem, we need to use the Poisson distribution, which is a probability distribution that describes the number of events that occur in a fixed interval of time or space, given the average rate of occurrence of those events.

The Poisson distribution has the following formula:

               [tex]P(X = k) = (\lambda\times ex^{-\lambda}) / k![/tex]    

Where:

P(X = k) is the probability that there are exactly k events in the interval

λ is the average rate of occurrence of events in the interval

e is the mathematical constant e (approximately 2.71828)

k! is the factorial of k (i.e., k * (k-1) * (k-2) * ... * 2 * 1)

Here we have

Between 11 pm and midnight on Thursday night Mystery pizza gets an average of 4.2 telephone orders per hour

A. The probability that at least 3 minutes will elapse before the next telephone order, using the complement rule:

=> P(at least 3 minutes) = 1 - P(less than 3 minutes)

Assume that the time between telephone orders follows an exponential distribution with a mean of 1/4.2 = 0.2381 hours (or 14.28 minutes).

Therefore, the Poisson distribution is λ = 1/0.2381 = 4.2/1.0 = 4.2.

Using the exponential distribution, we can find the probability of less than 3 minutes elapsing between orders as follows:

P(less than 3 minutes) = [tex]1 - e ^{(-\lambda \times t) }[/tex]

Where t = 3/60 = 0.05 hours

P(less than 3 minutes) = [tex]1 - e^{(-4.2\times 0.05) } = 0.203[/tex]

Therefore,

P(at least 3 minutes) = 1 - 0.203 = 0.797

The probability that at least 3 minutes will elapse before the next telephone order is 0.797.

B. To find the probability that less than 15 minutes will elapse between orders, we can use the same exponential distribution as before and set t = 15/60 = 0.25 hours:

P(less than 15 minutes) = [tex]1 - e ^{(-\lambda \times t) }[/tex]

P(less than 15 minutes) = [tex]1 - e^{(-4.2 \times 0.25)} = 0.677[/tex]

Hence, The probability that less than 15 minutes will elapse between orders is 0.677.

C. To find the probability that between 15 and 30 minutes will elapse between orders, we can subtract the probabilities found in less than 15 minutes and less than 30 minutes.

P(15 to 30 minutes) = P(less than 15 minutes) - P(less than 30 minutes) -

P(15 to 30 minutes) = [tex]e^{ (-\lambda0.5)} - e^{ (-\lambda 0.25)}[/tex]  

= 0.3499 - 0.1224  = 0.2275

Therefore,

The probability that at least 3 minutes will elapse before the next telephone order is 0.797.

The probability that less than 15 minutes will elapse between orders is 0.677.

The probability that between 15 and 30 minutes will elapse between orders is 0.2275

Learn more about Poisson distribution at

https://brainly.com/question/17280826

#SPJ1

Answer:

To calculate the moles of hydrogen gas produced, we need to use the ideal gas law equation:

PV = nRT

where P is the total pressure, V is the volume of the gas, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature to Kelvin by adding 273.15:

T = 26.0 + 273.15 = 299.15 K

Next, we need to calculate the pressure of the hydrogen gas by subtracting the vapor pressure of water from the barometric pressure:

P(H2) = P(total) - P(vapor) = 745 - 25.5 = 719.5 mmHg

Now we can plug in the values into the ideal gas law equation and solve for n:

n = PV/RT

n = (719.5 mmHg)(94.00 mL)/(62.3637 L mmHg/K mol)(299.15 K)

n = 0.00384 mol

Therefore, the moles of hydrogen gas produced by the reaction is 0.00384 mol.

Answer:

a) Simple interest = PRT/100 = (800 x 1.5 x 5)/100 = $60

b) Future value = P(1 + RT) = 800(1 + 0.015 x 5) = $870

Total time of loan = 6 months

Phyllis pays $200 two months into the loan, so she still owes $800 for the remaining 4 months.

Simple interest = PRT/100 = (800 x 2 x 4)/100 = $64

Total interest = $64 + $20 = $84

a) Exact interest = PRT/365 = (500 x 4.5 x 90)/36500 = $5.48

b) Future value = P(1 + RT) = 500(1 + 0.045 x 90/365) = $508.22

a) Ordinary interest = PTR/100 = (3500 x 3.5 x 60)/360 = $183.75

b) Proceeds = P - I = 3500 - 183.75 = $3316.25

c) Amount to be paid at maturity = P = $3500

d) Due date = May 4 + 60 days = July 3

APY = (1 + R/n)^n - 1 = (1 + 0.16/4)^4 - 1 = 0.1664 or 16.64%

Future value = P(1 + R/n)^(nt) = 4500(1 + 0.04/2)^(2 x 2) = $5,011.03

P = FV/(1 + R/n)^(nt) = 8000/(1 + 0.06/4)^(4 x 5) = $5,764.44

Interest = (900 x 0.12) + (500 x 0.1) = $132

APR = (132/900) x (365/20) x 100% = 730%

Future value = PMT x ((1 + R/n)^(nt) - 1)/(R/n) = 1000 x ((1 + 0.08/4)^(4 x 4) - 1)/(0.08/4) = $47,490.08

Future value = PMT x ((1 + R/n)^(nt) - 1)/(R/n) x (1 + R/n) = 50 x ((1 + 0.06/12)^(12 x 2.5) - 1)/(0.06/12) x (1 + 0.06/12) = $1,327.10

The elements in the set  (A∩B¹) = {2,11,12,} and (B∩A¹) ={5,7,8,9,13,15,16,18}

You should understand that Set theory is a branch of mathematical logic that studies sets, which can be informally described as collections of objects such as numbers, alphabets and variables.

The universal set

S = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20}

A = {1,2,6,11,12,19,20}

B = {1,5,6,7,8,9,13,15,16,18,19,20}

S = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20}

B¹ = {2.3.4.10.11.12.14.17)

A = {1,2,6,11,12,19,20}

(A∩B¹) = {2,11,12,}

The elements of (B∩A¹) is

S = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20}

A = {1,2,6,11,12,19,20}

A¹ = {3,4,5,7,8,9,10,13,14,15,16,17,18}

B = {1,5,6,7,8,9,13,15,16,18,19,20}

(B∩A¹)  = {5,7,8,9,13,15,16,18}

Learn more about set theory on https://brainly.com/question/27333813

#SPJ1

OR is the perpendicular bisector and R is the vertex of a pair of congruent angles in the diagram.

What is perpendicular bisector and a pair of congruent angles ?

A perpendicular bisector is a geometric tool that is commonly used in mathematics and geometry. It is used to divide a line segment into two equal parts and is constructed by first finding the midpoint of the line segment. The perpendicular bisector is then constructed by drawing a line perpendicular to the line segment at its midpoint.

In geometry, two angles are said to be congruent if they have the same measure. This means that they have the same size and shape, even if they are oriented differently. In other words, if you were to place one angle on top of the other, they would perfectly overlap.

Explanation of the true statements:

In the given diagram ,

PR=RN and OR is perpendicular .

Hence, OR is the perpendicular bisector because a perpendicular bisector is a line that passes through the midpoint of a line segment and intersects it at a right angle, dividing the segment into two equal parts.

The vertex of a pair of congruent angles is the point where the two angle bisectors intersect.
Hence, R is the vertex of a pair of congruent angles in the diagram.

To know more about bisector visit :

brainly.com/question/28663444

#SPJ1