Volatile high energy stored in bonds easily combustible organic compound liquid at room temperature based on the provided chemical and physical properties of the unknown substance, it would be most useful as a(n).

Absolute threshold refers to the minimum amount of stimulus energy required to be detected 50% of the time.

An absolute threshold is the lowest intensity of stimulation that can be recognized at least half of the time. The phrase is frequently used in neuroscience and experimental research and can refer to any input detectable by the human senses, including sound, touch, taste, sight, and smell.

In a sound detention experiment, for example, researchers may play a sound at varied volumes. The absolute threshold is the lowest level that a person can hear.

It is crucial to remember, however, that at such low levels, people may only register the stimulation a portion of the time.

To know more about absolute threshold, visit:

https://brainly.com/question/15301528

#SPJ4

Answer:

The mass of the plane is 5,096.8 meters

Explanation:

The formula for gravitational potential energy is

[tex]GPE=mgh[/tex]

Note:

[tex]GPE[/tex] is the gravitational potential energy in joules

[tex]m[/tex] is the mass in kilograms

[tex]g[/tex] is the acceleration due to gravity

[tex]h[/tex] is the height in meters

In this example we are given the height and the gravitational potential energy. Knowing that we can evaluate the mass.

[tex]GPE=60000000\\g=9.81\\h=1200\\[/tex]

[tex]60000000=m*9.81*1200[/tex]

[tex]\frac{60000000}{11772} =m[/tex]

[tex]m=5096.83996[/tex]

[tex]m=5096.8[/tex]

Learn more about gravitational potential energy here

https://brainly.com/question/26425766

The planes will be 900 miles apart at 11:12 am.

Speed = Distance / time

Distance = Speed x time

In t hours, first plane travels = 600 t miles

In t hours, the second plane travels =150 t miles

After t hours the distance between the two planes is:

(600t+150t)= 750t ( since both travel in opposite directions)

When the distance is 900 miles:

750t= 900

Solve for t:

t= 900/750

t= 1.2 hours

After 1.2 hours.

1.2 x 60 = 72 minutes = 60 +12 = 1 hour and 12 minutes

Since both leave at 10 pm:

10am + 1 hour and 12 minutes : 11:12 am

They will be 900 miles apart at 11:12 am

Each one traveled:

Plane 1:

Distance: Speed x time = 600 mph x 1.2 = 720 miles

Plane 2:

Distance = Speed x time = 150 mph x 1.2 = 180 miles

What is distance?

To know more about distance, click the link given below:

https://brainly.com/question/15172156

#SPJ4

Colloid osmotic pressure is the oncotic pressure which is opposite to the hydrostatic blood pressure.

Oncotic pressure is the colloid osmotic-pressure. It is a form of osmotic pressure which is induced by the proteins, notably the albumin protein, in a blood vessel's plasma which causes a pull on the fluid back into the capillaries in the body. Participating colloids displace the water molecules, thus creating a relative water molecule deficit with the water molecules moving back into the circulatory system in the body within the lower venous pressure end of capillaries.

Colloid osmotic-pressure has the opposing effect of both the hydrostatic blood pressure pushing water molecules and the small molecules which are out of the blood into interstitial spaces within the arterial end of the capillaries and interstitial colloidal osmotic pressure. These interacting factors can determine the partition balancing of extracellular water between the blood plasma and outside the blood stream.

Learn more about Osmotic pressure here:

https://brainly.com/question/15501096

#SPJ1

Answer:

D

Explanation:

Kinetic Energy = 1/2 m v^2

  the ball will have its maximum v, (velocity), at the bottom thus this is where it will have maximum KE

Solar Prominence is a huge reddish loop of gas that often link different parts of sunspot regions.

What is a Solar Prominence?

A solar prominence is a large, loop-like structure of plasma that extends from the Sun's surface into its outer atmosphere. Prominences are often associated with sunspot regions and can span hundreds of thousands of kilometers. They are composed of charged particles, primarily hydrogen and helium, that are held in place by the Sun's magnetic field. The reddish color is due to the emission of light in the hydrogen alpha spectral line. Solar prominences are dynamic structures that can erupt and release huge amounts of energy into space, in the form of coronal mass ejections.

To know more about Solar Prominence, Check out:

https://brainly.com/question/2827309

#SPJ4

.

The type of switch that connects all devices in a rack to the rest of the network is called a "Top of Rack (ToR) switch".

Top of Rack (ToR) switch is a type of network switch that is typically installed in a data center or server room at the top of a server rack. The main purpose of a ToR switch is to provide high-bandwidth connectivity to the servers or other network devices within the rack and to connect them to the rest of the network.

ToR switches are commonly used in large-scale computing environments, such as cloud data centers, web hosting facilities and enterprise server rooms where they help to improve network efficiency and simplify network management.

Learn more about Tor switches here : brainly.com/question/13318148

#SPJ1

A road able to support heavy loads. it was made out of crushed, packed stones/gravel and clay is true because   it was made out of crushed, packed stones/gravel and clay.

Cobblestone roads are a type of paved road that was commonly used in the past and is still used in some parts of the world today. It consists of small rounded stones that are tightly packed and held in place by a mixture of clay or sand.

The stones used in cobblestone streets are usually made of granite or other hard, durable material that can withstand the weight of heavy loads and resist erosion.Known for its durability and longevity Cobbled streets were often used in towns and cities to provide a smooth surface for horse-drawn carriages and other means of transportation. They are still used today in historic areas and as decorative elements in landscaping.

know more about road click here;

https://brainly.com/question/30632628

#SPJ4

The new total sound power, in decibels, when each of the x objects increases its sound power by 10 decibels, is given by the function g(x) =

60 + 10 log x.

The original function is given as:

f(x) = 50 + 10 log x

When each of the x objects increases its sound power by 10 decibels, the new total sound power can be calculated as:

g(x) = f(x) + 10

= 50 + 10 log x + 10 (adding 10 to account for the increase in sound power of each object)

= 60 + 10 log x

Thus, the new function g(x) is given g(x) = f(x) + 10  which represents the total sound power in decibels produced by x objects each having a sound power of 60 decibels (50 decibels + 10 decibels increase). This function uses the logarithmic scale to calculate the total sound power, where each 10-fold increase in the number of objects corresponds to a 10-decibel increase in the total sound power.

Learn more about decibels

brainly.com/question/26848451

#SPJ4

Answer:

Physics is a mathematical science. The underlying concepts and principles have a mathematical basis. Throughout the course of our study of physics, we will encounter a variety of concepts that have a mathematical basis associated with them. While our emphasis will often be upon the conceptual nature of physics, we will give considerable and persistent attention to its mathematical aspect.

The motion of objects can be described by words. Even a person without a background in physics has a collection of words that can be used to describe moving objects. Words and phrases such as going fast, stopped, slowing down, speeding up, and turning provide a sufficient vocabulary for describing the motion of objects. In physics, we use these words and many more. We will be expanding upon this vocabulary list with words such as distance, displacement, speed, velocity, and acceleration. As we will soon see, these words are associated with mathematical quantities that have strict definitions. The mathematical quantities that are used to describe the motion of objects can be divided into two categories. The quantity is either a vector or a scalar. These two categories can be distinguished from one another by their distinct definitions:

Scalars are quantities that are fully described by a magnitude (or numerical value) alone.

Vectors are quantities that are fully described by both a magnitude and a direction.

The remainder of this lesson will focus on several examples of vector and scalar quantities (distance, displacement, speed, velocity, and acceleration). As you proceed through the lesson, give careful attention to the vector and scalar nature of each quantity. As we proceed through other units at The Physics Classroom Tutorial and become introduced to new mathematical quantities, the discussion will often begin by identifying the new quantity as being either a vector or a scalar.

Explanation:

The wavelength of an electromagnetic wave decreases with increasing frequency.

The wavelength, which also refers to troughs, is the separation between two wave crests. The number of vibrations that span a particular area in a second is known as the frequency, which is measured in cycles per second (Hz) (Hertz).

The distance a wave may travel in one cycle is called its wavelength.. The SI unit for wavelength is the metre, and the wavelength sign is (m). One metre is the distance travelled by light travelling in a vacuum at a time of 1/(3 x 10) as a unit of speed and distance.

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ4

The depth of underwater to dive to quadruple the atmospheric pressure at the surface is 30 meters.

For every additional 10 meters deeper one dives, there is increase in pressure on your body by 1 bar. Our bodies are subject to 3 atmospheres or bars of pressure at a depth of 20 meters and 4 bar/atm at 30m.

At sea level, the pressure of the air that surrounds us is equal to 1 bar, which is every so often referred to as 1 atmosphere. If one dive to just 10 meters deep and that pressure is doubled – because water is much denser than air, it applies a much greater compressive force on your body.

To learn more about atmospheric pressure,

brainly.com/question/13450762

#SP J4

The correct option is B, The fact that we always see the same face of the Moon tells us that the Moon rotates with the same period that it orbits Earth.

The Moon rotates on its own axis in a process known as rotation. Like most celestial bodies, the Moon rotates in a counterclockwise direction when viewed from above its north pole. This means that as the Moon orbits the Earth, the same side of the Moon always faces us. This phenomenon is known as synchronous rotation, and it occurs because the Moon's rotation period is almost exactly the same as its orbital period around the Earth.

The Moon's rotation is not a perfect sphere, however, and it has a slight bulge at the equator. This is due to the gravitational pull of the Earth, which has caused the Moon to become slightly deformed over time. The Moon's axial tilt is also very small, which means that its poles are nearly perpendicular to its orbital plane.

To learn more about Moon rotates visit here:

brainly.com/question/30629800

#SPJ4

The true statement is, the charge is confined to the surface and is uniformly distributed. Option B is correct.

This is known as the "electrostatic shielding effect". When a conductor is charged, the charges will distribute themselves on the surface of the conductor, and the electric field inside the conductor will be zero. This is due to the fact that charges in a conductor will always rearrange themselves in such a way as to minimize the energy of the system, and having charges inside the conductor would increase the system's energy.

As a result, the charges on a conductor will distribute themselves on the surface, where they can spread out as much as possible and minimize their mutual repulsion.

To know more about the electrostatic shielding effect, here

brainly.com/question/26366780

#SPJ4

The magnitude of the electric force is 8.16 x 10⁻¹⁵ N

We solve by the formula:

q = 1.6 x 10⁻¹⁹ x 30

Solving gives:

F=Eq= 1,700 x 1.6 x 10⁻¹⁹C x 30

= 8.16 x 10⁻¹⁵ N

There are two types of forces, namely touching forces and non-touching forces. These two types of forces are divided according to the presence or absence of contact.

Touch force is a force that arises as a result of direct contact or physical contact with objects. In this type of force, the force cannot exist if the objects do not touch each other. Examples of this touch force are frictional force, muscle force and spring force.

The non-contact force is the force that arises due to the presence of a field around the object that is the source of the force with the surrounding objects. Even though the objects do not touch each other, the objects around the source of the force will feel the effect, for example the electric force, the magnetic force and the gravitational force.

Based on the explanation above, it can be concluded that the electric force is a force that is generated or generated by various objects that have an electric charge. Electric force can also be interpreted as a force generated by objects that have an electric charge in an electric field.

Find out more on  magnitude at

https://brainly.com/question/870552

#SPJ4

We never see the Moon next to Polaris (the North Star) because the Moon's orbit around the Earth is not aligned with the Earth's rotation axis. Instead, the Moon's orbit is inclined at an angle of about 5 degrees to the Earth's orbit around the Sun.

This means that the Moon appears to move across the sky along a path that is inclined at a similar angle to the Earth's equator. Polaris, on the other hand, appears to remain in a fixed position relative to the Earth's rotation axis. As a result, the Moon and Polaris appear to move along different paths in the sky and are unlikely to be seen next to each other.

To know more about Moon's orbit, here

https://brainly.com/question/17228122

#SPJ4

"An electron beam is aimed at two closely spaced slits. The beam is attenuated to produce only one electron per minute is known as interference pattern." The answer is yes.

When an electron beam is aimed at two closely spaced slits, the electrons passing through the slits will interfere with each other, producing an interference pattern on a screen behind the slits. The interference pattern will be a series of bright and dark bands, where the bright bands correspond to constructive interference and the dark bands correspond to destructive interference.

When a beam of electrons is passed through two closely spaced slits, it creates an interference pattern on a screen behind the slits. This pattern results from the wave-like behaviour of electrons and the interference between the electrons passing through the two slits. The pattern appears as a series of bright and dark bands, where the position and intensity of the bands are determined by the relative phase of the electrons.

The interference pattern only becomes noticeable with a large number of electrons passing through the slits at the same time. If only one electron is passing through the slits per minute, the pattern will not be easily observable.

To know more about electron beam:

https://brainly.com/question/30631048

#SPJ4

So the speed 7.5 seconds later is 17.97m/s.

m = mass of the jetliner = 3.57 x 10⁵ kg

The initial speed of the jet is v1=27 m/s

Net Braking force=– 4.30 × 10⁵ N

To find v2

v2=Ft/m +v1

v2=( –4.30 × 10⁵ NN ×7.5 s/ 3.57 x 10⁵ kg) + 27m/s

v2=17.97 m/s

Mass was first discovered by Sir Isaac Newton through research on gravity and the inertial properties of objects he developed. Newton was an English physicist, mathematician, chemist, astronomer, natural philosopher, and theologian.

Mass can be interpreted as a measure of the number of particles contained in a substance or object. Mass is also one of the principal quantities that shows the size of the inertia of an object. Mass becomes an intrinsic property of an object, so that wherever the object is, the mass value will remain the same. If it is based on the effect of the object on the direction of motion, mass is classified as a scalar quantity (only has value).

Learn more about mass at

https://brainly.com/question/6240825

#SPJ4

The correct option is, that the answer depends on the type of steel and the type of wood to find the shallowest angle at which the block will begin to fall.

The block of steel is to be made and has to be placed on the wood board and the wood board is to be titled and we have to find that at which face of the block on the wood will slide the block at the shallowest angle.

The box will slide depending upon the friction, the friction is given by,

F = uMa

Where,

u is the coefficient of static friction and it depends on the nature of the wood and the steel type,

M is the mass of the block and a is acceleration

As w see that m and a are constant and only u can change so, we conclude that, the answer depends on the type of steel and the type of wood.

To know more about friction, visit,

https://brainly.com/question/24338873

#SPJ4

The precise moment when visible light energy from the sun is captured and converted to chemical energy is called Photosynthesis.

Define Photosynthesis.

The process by which light energy is transformed into chemical energy in the form of sugars is known as photosynthesis. Using light energy, glucose (or other sugars) are created from carbon dioxide and water, with oxygen being released as a byproduct.

When a photochemically activated specific chlorophyll molecule of the photosynthetic reaction center loses an electron through an oxidation reaction, light energy is transformed into chemical energy. Water and carbon dioxide are converted by plants into a sugar called glucose using the power of the sun. Plants use glucose as a source of energy and to create other compounds like cellulose and starch.

To learn more about Photosynthesis use link below:

https://brainly.com/question/13027734

#SPJ1

When a dielectric material is inserted between the plates of a charged capacitor, the free charge on the surface of the plates will remain unchanged, while the total charge (free and bound) on the surface of the plates will decrease.

A dielectric material is an insulating material that can store electrical energy in an electric field. In other words, it is a material that has a high resistance to the flow of electric current and does not conduct electricity.

Dielectric materials are commonly used as insulators in capacitors, which are electronic components that store electrical energy in an electric field. When a dielectric material is placed between the plates of a capacitor, it increases the capacitance of the capacitor, allowing it to store more electrical energy.

Examples of dielectric materials include air, glass, ceramics, and certain plastics. The properties of a dielectric material, such as its dielectric constant, determine how effective it is at storing electrical energy in an electric field.

Overall, dielectric materials play an important role in many electrical and electronic devices, including capacitors, transformers, and other components that use electric fields to store and transfer electrical energy.

To know more about dielectric material , visit:

https://brainly.in/question/38622095

#SPJ4

1. D

2. B

3. D

No 4?

5. C

The root cap, a specialised organ at the apex of the root, aids plants in understanding gravity.

The portion of a plant that is underground and usually extends downward into the soil are called plant roots. The main job of the roots is to draw water and nutrients from the ground and anchor the plant in place. They are made up of a variety of specialised components, such as vascular tissue, root hairs, and caps on the roots.

At the root's tip, the root cap serves as protection for the growing tip since it penetrates the ground. The surface area that is available for absorption is increased by the root hairs, which are tiny, finger-like projections that protrude from the surface of the root.

To know more about plant root visit :

https://brainly.com/question/8647279

#SPJ4

Spillover effect has been magnified with the advent of globalization and the interconnectedness of economies.

The spillover effect refers to the transmission of effects from one country or market to another. This can occur through various channels such as trade, finance, and investment. With the increasing integration of economies and financial markets, a crisis in one country or market can quickly spread to other countries, magnifying the impact of the initial shock.

In order to mitigate the negative impact of spillover effects, it is important for countries to maintain a strong and stable financial system, and to promote international cooperation and coordination in financial regulation. This can help to reduce the likelihood and severity of future financial crises, and to ensure that any negative effects are contained and quickly resolved.

Learn more about Spillover effect  here: https://brainly.com/question/21448889

#SPJ1

The Earth's Moon, whose diameter is roughly 1/4 that of the Earth, stands out as exceptional for our solar system.

Although there are more than 3,200 other stars in our galaxy with planets around them, only our planetary system is officially referred to be a "solar system" by astronomers. A star with planets surrounding it, the solar system is just one example of a planetary system.

When Earth's surface temperature rises four billion years from now, a runaway greenhouse effect will result, producing conditions that are more extreme than those on Venus right now and heating the planet's surface to the point of melting. By then, all life on Earth will have vanished.

To know more about Solae system visit:

https://brainly.com/question/28335698

#SPJ4

The battery has a voltage of roughly 16.6 V.

an easy downshifter with resistors. A resistive divider is the most basic step-down circuit that is feasible. Put the 5V output through a series of resistors and then tap the 3.3V logic input. An applied 5V input should result in a 3V output from a chain of 2.2k and 3.3k resistors.

When resistors are connected in series, the circuit's overall resistance is the sum of its component resistances:

R_total = R_1 + R_2 + ...

R_total = R_1 + R_2 = 25.0 ohm + 40.0 ohm = 65.0 ohm

The current flowing through the circuit is given as 0.255 Amps.

We can use Ohm's law to calculate the voltage of the battery:

V = I × R_total

Substituting the values, we get:

V = 0.255 A × 65.0 ohm ≈ 16.6 V

To know more about voltage visit:-

https://brainly.com/question/13521443

#SPJ1

Monocular depth cues are visual cues that can be perceived with one eye, while binocular depth cues are visual cues that require both eyes to be perceived.

Monocular depth cues include:
- Relative size: Objects that are closer appear larger than objects that are farther away.
- Linear perspective: Parallel lines appear to converge as they get farther away.
- Interposition: Objects that are closer block the view of objects that are farther away.
- Texture gradient: The texture of an object becomes less detailed as the object gets farther away.
- Light and shadow: The way light falls on an object can give the impression of depth.

Binocular depth cues include:
- Retinal disparity: Each eye sees a slightly different image of an object, and the brain uses the difference between these images to judge the distance of the object.
- Convergence: The closer an object is, the more the eyes have to turn inward to focus on it.

Both monocular and binocular depth cues are important for perceiving depth and distance in the world around us.

To know more about depth cues here:

https://brainly.com/question/1256135#

#SPJ11

The word Core means: The sun's center.

Depending on the context, the word "core" can indicate many different things, but when it comes to the Sun, it typically refers to option the Sun's center. The nuclear fusion reactions that take place in the Sun's core are where the energy for the star is produced. The core of the sun is the area where nuclear fusion processes occur, producing a huge quantity of heat and energy. The sun's core has the highest temperature, up to a whopping 27 million degrees Fahrenheit. Since the sun's energy is produced in the core and radiates outward to its surface and beyond, the core is known as the sun.

To know more about the core, check out:

https://brainly.com/question/29452644

#SPJ4

The force of magnitude 22N will also be double to a magnitude of 44N when the mass of one of the bodies is doubled.

The gravitational force of any two bodies is given by,

F = GMm/R²

Where,

M and m are the masses of the bodies,

R is the distance between them and G is the universal gravitational constant.

Currently the force of gravitation between two bodies is given to be 22N.

Now, if one of the mass is doubled, let say M = 2M, so the new force will be,

F' = G(2M)m/R²

F' = 2GMm/R²

Putting F = GMm/R²,

F' = 2F

So, the force of gravitation between the two bodies will be doubled. So, the new force will be 44N.

To know more about gravitation, visit,

https://brainly.com/question/557206

#SPJ4

Anions, which are negatively charged ions, are typically larger than their parent neutral atoms. This is because the addition of an electron to the outermost energy level of an atom results in an increase in the electron-electron repulsion, which causes the electron cloud to expand.

The negative charge of the electrons in an atom balances the positive charge of the nucleus in a neutral atom. Yet, the number of electrons rises when an atom gains an electron to form an anion, leading to a larger electron-electron attraction. The atomic radius rises as a result of the electron cloud dispersing in this way.

For instance, if a neutral chlorine atom obtains an electron to form a chloride ion, the additional electron moves into the atom's outermost energy level and strengthens the electron-electron attraction. As a result, the electron cloud widens, increasing the chloride ion's atomic radius relative to the neutral chlorine atom.

As a result of the presence of an additional electron, anions are typically bigger than their parent neutral atoms.

For such more questions on parent neutral atom:

brainly.com/question/29235711

#SPJ4