Valence bond theory predicts that tin will use _____ hybrid orbitals in SnCl3-.
A) sp B) sp2 C) sp3 D) sp3d E) sp3d2

A) Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

The temperature and pressure of a reaction will affect the rate of reaction.

Pressure

Pressure and the rate of reaction have a direct relationship. This means that as one increases, so does the other. So, if the pressure increases. then the rate of reaction will also increase. This is due to the number of collisions. As pressure increases, the number of collisions between molecules increases. This causes the reaction to occur faster. Thus, the rate of reaction increases.

Temperature

Kinetic energy and temperature are proportional. This means that as temperature increases, so does kinetic energy. This leads to temperature and rate of reaction also having a direct relationship. So, temperature and rate of reaction increase and decrease together. This is due to the fact that when temperature increases, the energy of the molecules increases. This leads to an increased number of collisions. As stated above, more collisions lead to a faster reaction.

Answer:

In a quantum model of the atom, the shape of an electron orbital represents the probability distribution of finding an electron in a particular region of space around the nucleus of an atom. In other words, an electron orbital is a three-dimensional space around the nucleus where there is a high probability of finding an electron with a given energy level.

Different orbitals can have different shapes, such as spherical, hourglass-shaped, or more complex shapes.

Electron Orientations:

s = 1 orbital orientation

p = 3 orientations ([tex]6e^-[/tex])

d = 5 orientations ([tex]10e^-[/tex])

f = 7 orientations ([tex]14e^-[/tex])

The data one must have in order to complete a titration problem is the molarity and volume of the titrant and titrand.

Titration in analytical chemistry is the determination of the concentration of some substance in a solution by slowly adding measured amounts of some other substance (normally using a burette) until a reaction is shown to be complete, for instance by the colour change of an indicator.

In titration procedure, acids and bases are commonly but not always involved. After the titration experiment, the following formula is used to calculate the molarity of the titrant:

CaVa = CbVb

Where;

Learn more about titration at: https://brainly.com/question/31271061

#SPJ1

The coordination number of [Co(NH3)6]3+ is 6, [Ca(EDTA)]2- is 8, Pt(NH3)4 2+ is 4, and Na[Au(CI)2] is 2.

a. [Co(NH3)6]3+: The coordination number of this complex is 6. Each ammonia molecule has a lone pair of electrons that can form a coordinate covalent bond with the cobalt ion. Therefore, the cobalt ion is surrounded by six ammonia molecules in an octahedral arrangement. b. [Ca(EDTA)]2- : The coordination number of this complex is 8. The EDTA molecule has four carboxylic acid groups and two amine groups that can form coordinate covalent bonds with the calcium ion. Therefore, the calcium ion is surrounded by eight atoms or groups in a square antiprismatic arrangement. c. Pt(NH3)4 2+ : The coordination number of this complex is 4. Each ammonia molecule has a lone pair of electrons that can form a coordinate covalent bond with the platinum ion. Therefore, the platinum ion is surrounded by four ammonia molecules in a square planar arrangement. d. Na[Au(CI)2] : The coordination number of this compound is 2. The gold ion is coordinated by two chloride ions in a linear arrangement. The sodium ion is not involved in the coordination sphere of the gold ion

For more such questions on coordination

https://brainly.com/question/31537476

#SPJ11

As Earth makes its way around the sun (earth orbit) along a tilted path relative to its own axis we experience staggered views of different stars and constellations depending on where we find ourselves across our annual trajectory.

The cycle of our planet traveling along an elliptical orbit around the sun provides us with what we know as a year or roughly 365.25 days of time measurement; however, this orbital path isn't uniformed and appears like a flattened circle with one focus positioned near our star - The Sun.

This causes changes in distance between both objects throughout different periods of time during its annual journey; for instance, early January denotes when we reach perihelion or our shortest distance from Sun while we hit aphelion on early July - marking our farthest measured distance from it.

Learn about earth's orbit here https://brainly.com/question/19520552

#SPJ1

Option D (HOOC-CH2-CH2-COOH) is the most acidic compound among the given options.

To determine the most acidic compound among the given options and to identify the true relationship between them, let's evaluate each compound:

A) CH3OH: Methanol

Methanol is a weak acid. It can donate a proton (H+) but not as readily as some other compounds. It is less acidic compared to the other options.

B) (CH3)3COH: tert-Butanol

Tert-butanol is a weak acid. It can donate a proton (H+), but it is relatively less acidic than some other compounds.

C) CH3COOH: Acetic acid

Acetic acid is a weak acid. It can donate a proton (H+), and it is more acidic than both methanol and tert-butanol.

D) HOOC-CH2-CH2-COOH: Malonic acid

Malonic acid is a dicarboxylic acid, which means it can donate two protons (H+). It is more acidic than the previous compounds mentioned.

Therefore, the true relationship among the compounds in terms of acidity is as follows:

A) CH3OH < B) (CH3)3COH < C) CH3COOH < D) HOOC-CH2-CH2-COOH

For more question on acidic compound click on

https://brainly.com/question/23116443

#SPJ11

Answer:

c

Explanation:

dnc

Answer:

Explanation:

balance

2 C2H6 + 7  O2  --> 4 CO2 + 6 H2O

given 360 g H20 (g)

required =586.67 g CO2

360 g H20 x (1mole/18 g H20) X (4 mole CO2/6 moles H20) X (44g CO2/1mole) =586.67 g CO2

Answer:

The chemical elements are arranged from left to right and top to bottom in order of increasing atomic number, or the number of protons in an atom's nucleus.

Explanation:

We can use the following formula to determine the standard cell potential from standard free energy changes:

ΔG° = -nFE°

where

ΔG° is the standard free energy change,

n is the number of moles of electrons transferred in the balanced chemical equation,

F is Faraday's constant (96,485 C/mol), and

E° is the standard cell potential.

You can find the standard free energy change (G°) for a specified fuel cell in readily available references. These values ​​are listed:

1. Fuel cell for H2/O2: G° = -237.2 kJ/mol

The chemical formula is 2H2 + O2 -> 2H2O.

In this example, n is equal to 4 (transferring 4 moles of electrons).

After entering the values ​​into the formula, we get:

-4 * 96,485 C/mol * E°1 = -237.2 kJ/mol

As we solve for E°1, we get:

E°₁ ≈ 1.23 V

2. G° = -326.7 kJ/mol for a methanol/O2 fuel cell.

The balanced chemical formula is: CO2 + 2H2O = CH3OH + 1.5O2.

In this example, n is equal to 6 (transferring 6 moles of electrons).

After entering the values ​​into the formula, we get:

-6 * 96,485 C/mol * E°2 = -326.7 kJ/mol

As we solve for E°2, we get:

E ° ₂ ≈ 0.54 V

3. Fuel cell for ethanol and oxygen: G° = -329.6 kJ/mol

The chemical formula is: C2H5OH + 3O2 -> 2CO2 + 3H2O.

In this example, n is equal to 12 (12 electron moles are exchanged).

After entering the values ​​into the formula, we get:

-12 * 96,485 C/mol * E°3 = -329.6 kJ/mol

As we solve for E°3, we get:

E°₃ ≈ 0.27 V

4. Fuel cell for glucose and oxygen: G° = 2,840 kJ/mol

The chemical formula is C6H12O6 + 6O2 -> 6CO2 + 6H2O.

Since 24 moles of electrons are transported, n = 24 in this example.

After entering the values ​​into the formula, we get:

-24 * 96,485 C/mol * E°4 = 2,840 kJ/mol.

Solving for E°4, we get:

E°₄ ≈ 0.37 V

Learn more about chemical formula, here:

https://brainly.com/question/32018188

#SPJ1

The total pressure of the gases in the container is 1.000 atm at RTP.

To calculate the total pressure of the gases in the container, we need to use the ideal gas law, which states:

PV = nRT

where P is the pressure of the gas, V is the volume of the container, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin.

At RTP (standard temperature and pressure), the temperature is 273 K and the pressure is 1 atm. The volume of the container is not given, but since it is rigid, we can assume it is constant.

To find the total pressure, we need to first calculate the partial pressures of each gas using the mole fraction of each gas. The mole fraction is the fraction of the total moles of gas that are made up of each gas.

Let's assume that we have 100 moles of gas in the container. Then, we have:

20.0 moles of helium (20.0% of 100 moles)

20.0 moles of neon (20.0% of 100 moles)

60.0 moles of argon (60.0% of 100 moles)

The total moles of gas is then:

n = 20.0 moles + 20.0 moles + 60.0 moles = 100 moles

The mole fraction of helium is:

X(He) = n(He) / n = 20.0 moles / 100 moles = 0.200

The mole fraction of neon is:

X(Ne) = n(Ne) / n = 20.0 moles / 100 moles = 0.200

The mole fraction of argon is:

X(Ar) = n(Ar) / n = 60.0 moles / 100 moles = 0.600

The partial pressure of helium is:

P(He) = X(He) * P(total) = 0.200 * 1 atm = 0.200 atm

The partial pressure of neon is:

P(Ne) = X(Ne) * P(total) = 0.200 * 1 atm = 0.200 atm

The partial pressure of argon is:

P(Ar) = X(Ar) * P(total) = 0.600 * 1 atm = 0.600 atm

The total pressure is the sum of the partial pressures:

P(total) = P(He) + P(Ne) + P(Ar) = 0.200 atm + 0.200 atm + 0.600 atm = 1.000 atm

For more question on pressure click on

https://brainly.com/question/24719118

#SPJ11

In the following experiment, a coffee-cup calorimeter containing 100 mL of [tex]H_{ 2} O[/tex] is used. The initial temperature of the calorimeter is 23.0 ∘C. If 6.60 g of [tex]CaCl_{2}[/tex] is added to the calorimeter, Final temperature of the solution in the calorimeter = 11.

The first step in solving this problem is to calculate the number of moles of [tex]CaCl_{2}\\[/tex] added to the calorimeter.

Moles of [tex]CaCl_{2}[/tex] = mass of [tex]CaCl_{2}[/tex] / molar mass of [tex]CaCl_{2}[/tex]

Moles of[tex]CaCl_{2}[/tex] = 6.60 g / 110.98 g/mol (molar mass of [tex]CaCl_{2}[/tex]

Moles of[tex]CaCl_{2}[/tex] = 0.0594 mol

We can use the equation for heat transfer to find the change in temperature of the solution. q = mCsΔT, where q is the heat transferred, m is the mass of the solution, Cs is the specific heat of the solution, and ΔT is the change in temperature.

We know that the initial temperature of the calorimeter is 23.0 ∘C and the mass of the solution is 100 g (since the density of water is 1 g/mL). We can solve for ΔT: ΔT = q / mCs

To find q, we can use the enthalpy change of solution (ΔHsoln) and the number of moles of[tex]CaCl_{2}[/tex]added: q = ΔHsoln x moles of[tex]CaCl_{2}[/tex]

q = -82.8 kJ/mol x 0.0594 mol

q = -4.92 kJ

Now we can solve for ΔT: ΔT = (-4.92 kJ) / (100 g x 4.184 J/g⋅∘C)

ΔT = -11.8 ∘C

We can find the final temperature of the solution by adding the change in temperature to the initial temperature: Final temperature = 23.0 ∘C - 11.8 ∘C =11 ∘C.

Learn more about calorimeter here:

https://brainly.com/question/4802333

#SPJ1

Answer:

Explanation:

constant = 33.43 ml  charles law; formula is v1/t1=v2/t2

129.77 mmhg= boyles law;  = p1v1=p2v2

659.51 K ; gay-lussac law; P1/T1=P2/T2

20.79 mL; combined gas law; p1v1/t1=p2v2/t2

90.67 mmHg; combined gas law; P1V1/T1=P2V2/T2

Explanation:

To calculate the heat gained by nickel, we can use the formula:

q = m * c * ΔT

where q is the heat gained, m is the mass of the nickel, c is the specific heat of nickel, and ΔT is the change in temperature.

Given:

- Mass of nickel, m = 31.4 g

- Specific heat of nickel, c = 0.443 J/g · °C

- Change in temperature, ΔT = 64.2 °C - 27.2 °C = 37.0 °C

Substituting the values into the formula, we get:

q = (31.4 g) * (0.443 J/g · °C) * (37.0 °C)

Simplifying the calculation, we get:

q = 584 J

Therefore, the heat gained by nickel when 31.4 g of nickel is warmed from 27.2 °C to 64.2 °C is 584 J.

Due to the extreme density of the white dwarf, a piece the size of an ice cream cone would weigh approximately 523,600,000 g, or 523,600 kg.

This is roughly equivalent to 523.6 metric tonnes. A white dwarf is far denser than any material on Earth, with a density of about 1 million grams per cubic centimeter. A white dwarf's high density is the result of its atoms being packed together due to intense gravitational pressure. We can better understand the tremendous density of a white dwarf by comparing the weight of an ice cream cone-sized piece to the weight of a typical object.

Learn more about Density, here:

https://brainly.com/question/29775886

#SPJ1

The final temperature of the water is 71.99°C.

The final temperature when 625 grams of water at 75.0°C loses 7.96 x 10⁴ J can be found using the specific heat capacity equation:

q = mcΔT

where q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

First, we need to determine the specific heat capacity of water, which is 4.18 J/g°C. Then we can rearrange the equation to solve for ΔT:

ΔT = q / (mc)

Substituting the given values, we get:

ΔT = (7.96 x 10⁴ J) / (625 g x 4.18 J/g°C)

ΔT = 3.01°C

Therefore, the final temperature is:

Tfinal = Tinitial - ΔT

Tfinal = 75.0°C - 3.01°C

Tfinal = 71.99°C

As a result, the water's ultimate temperature is 71.99°C.

To know more about the Temperature, here

https://brainly.com/question/10185010

#SPJ1

The kinetic energy of a single molecule of nitrogen (N₂) with a velocity of 400.0 m/s is approximately 3.72 x 10^-21 joules.

To calculate the kinetic energy of a single molecule of nitrogen (N₂) with a velocity of 400.0 m/s, we can use the equation for kinetic energy: KE = 1/2 * m * v², where KE represents the kinetic energy, m is the mass of the molecule, and v is the velocity.

(a) Unit conversions:

The mass of a nitrogen molecule (N₂) is approximately 28 atomic mass units (u) or 4.65 x 10^-26 kilograms (kg).

The given velocity is already in meters per second (m/s), so no further conversion is needed.

(b) Calculating the kinetic energy:

Plugging the values into the kinetic energy equation, we have:

KE = 1/2 * (4.65 x 10^-26 kg) * (400.0 m/s)²

Evaluating the expression:

KE = 1/2 * 4.65 x 10^-26 kg * 160000 m²/s²

= 3.72 x 10^-21 joules (J)

For more such questions on  kinetic energy

https://brainly.com/question/8101588

#SPJ11

The graph that correctly identifies the reaction that was carried out with a catalyst is Trial 2 because it decreased the activation energy needed for the reaction to occur. The correct option is C.

Catalysts are substances that increase the rate of a chemical reaction without undergoing any permanent changes themselves.

Catalysts increase the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.

Catalysts have the following features:

Learn more about catalysts at: https://brainly.com/question/31596895

#SPJ1

Cuso4 + NaoH -》cu(oH)2 +Na2So4

Cuso4 + 2NaoH -》cu(oH)2 +Na2So4

Explanation:

this is balanced equation

If the Earth were to rotate from east to west (opposite to its current direction) at the same rate, the day and night cycle would be affected.

The most noticeable difference would be the direction of sunrise and sunset. With an east-to-west rotation, the Sun would rise in the west and set in the east. This reversal of the day-night cycle would affect our perception of time and require adjusting our daily routines accordingly.

Reversing the rotation would reverse the Coriolis effect as well. This change would lead to different global wind patterns and ocean currents, affecting weather systems and climate patterns worldwide.

Learn more about the Earth, here:

https://brainly.com/question/16455426

#SPJ1

To name Type 2 ionic compounds such as AuCl₃, you need to use the Stock system or Roman numeral system to indicate the oxidation state of the cation. Some steps are; Identify the cation, Determine the charge, Write the name, and combine two names.

Here are the steps to name AuCl₃; Identify the cation and anion. In this case, the cation is Au³⁺ and the anion is Cl⁻.

Determine the charge on the cation by using the anion's charge and balancing the charges to zero. Since Cl⁻ has a charge of -1 and there are three Cl⁻ ions in the compound, the total negative charge is -3. Therefore, the Au³⁺ ion has a charge of +3.

Write the name of the cation first, followed by the name of the anion with an -ide ending. Since the cation is Au³⁺, we use the name "gold(III)" to indicate the oxidation state of +3. The anion is Cl⁻, so we add the -ide ending to get "chloride".

Combine the two names to get the compound's name: "gold(III) chloride".

Therefore, the name of the Type 2 ionic compound AuCl₃ is "gold(III) chloride".

To know more about ionic compounds here

https://brainly.com/question/9167977

#SPJ1

Answer:

0.9192mol

Explanation:

2 FeCl2 + Cl2 → 2 FeCl3

Cl2       :       FeCl3

1            :      2

X           :      1.8384

X= 1.8384/2

X= 0.9192

I hope it helps :)

The atomic mass of Aluminum is 23, which means it has a total of 23 particles in its nucleus, including protons and neutrons.

Aluminum has an atomic number of 13, which means it has 13 protons in its nucleus.

To find the number of neutrons, we subtract the atomic number from the atomic mass. So, Aluminum has 23 - 13 = 10 neutrons in its nucleus. Electrons are the negatively charged particles that orbit around the nucleus of an atom.

Aluminum, being a neutral atom, has an equal number of electrons to the number of protons in its nucleus, which is 13. These electrons are distributed in different energy levels or shells around the nucleus.

Aluminum is a widely used metal in different applications due to its unique properties such as low density, high strength, and resistance to corrosion. It is used in the manufacturing of cans, foils, and aircraft parts. The number of protons and electrons determines the atomic number and chemical properties of an element. The number of neutrons affects the stability and isotopes of an element.

for more questions on atomic

https://brainly.com/question/30390726

#SPJ11

The crystal I chose is sodium chloride crystals and it is beneficial for man as it is used in the preservation of food as well as in seasoning of food.

A solid whose components are arranged in a highly ordered microscopic structure to form an all-pervasive crystal lattice is referred to as a crystal.

Sodium chloride also referred to as common salt is an ionic compound that has the chemical formula NaCl.

Sodium chloride is an essential nutrient employed in healthcare. It is employed as a spice to improve flavor and as a food preservative. Additionally, sodium chloride is employed in the production of plastics and other goods and is applied to de-ice sidewalks and roadways

Learn more about sodium chloride at: https://brainly.com/question/24878544

#SPJ1

The tilt of the Earth's axis plays a crucial role in causing the seasons. The Earth's axis is tilted at an angle of approximately 23.5 degrees relative to its orbital plane around the Sun. This tilt means that different parts of the Earth receive varying amounts of sunlight throughout the year.

During the summer season, when a particular hemisphere is tilted towards the Sun, its sunlight rays strike that hemisphere more directly, resulting in more concentrated solar energy. This leads to warmer temperatures and longer days.

Meanwhile, the opposite hemisphere experiences winter as it is tilted away from the Sun, receiving sunlight at a more oblique angle, resulting in weaker solar energy, cooler temperatures, and shorter days.

During the spring and autumn seasons, the tilt of the Earth's axis is such that neither hemisphere is significantly tilted towards or away from the Sun, resulting in more balanced amounts of sunlight and moderate temperatures. The tilt of the Earth's axis is the primary reason behind the beautiful cycle of seasons we experience throughout the year.

For more such questions on seasons

https://brainly.com/question/10667808

#SPJ11

It can serve as a valuable starting point for your research on igneous rocks. It can be a valuable resource for understanding the formation and characteristics of igneous rocks.

However, I can suggest three commonly used and reputable websites that you can consider using to start your research:Encyclopedia Britannica (www.britannica.com): This website provides reliable and comprehensive information on a wide range of topics, including geology and earth sciences.

United States Geological Survey (USGS) (www.usgs.gov): The USGS website offers a wealth of geological information, including articles, maps, and data related to rocks, minerals, and various geological processes.

Geology.com (www.geology.com): Geology.com is a website that covers various geological topics, including igneous rocks. It provides articles, images, and interactive tools that can help you explore and understand the subject in detail.

Remember to critically evaluate the information obtained from these sources and cross-reference it with other reputable sources to ensure accuracy and reliability.

For more such questions on igneous rocks

https://brainly.com/question/1143409

#SPJ11

The mass (in grams) of carbon dioxide, CO₂ produced, given that 360 g of water vapor was produced from the reaction is 586.67 g

First, we shall obtain the mass of C₂H₆ that reacted to produce 360 g of water vapor, H₂O. This is obtain as follow:

2C₂H₆ + 7O₂ -> 4CO₂ + 6H₂O

From the balanced equation above,

108 g of H₂O were obtained from 60 g of C₂H₆

Therefore,

360 g of H₂O will be obtain from = (360 × 60) / 108 = 200 g of C₂H₆

Thus, we can mass of C₂H₆ that reacted is 200 g

Finally, we shall obtain the mass of carbon dioxide, CO₂ produced. This is shown below:

2C₂H₆ + 7O₂ -> 4CO₂ + 6H₂O

From the balanced equation above,

60 g of C₂H₆ reacted to produce 176 g of CO₂

Therefore,

200 g of C₂H₆ will react to produce = (200 × 176) / 60 = 586.67 g of CO₂

Thus, the mass of carbon dioxide, CO₂ produced is 586.67 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

Answer:

To determine the number of moles of oxygen consumed to produce 68.1g of water, we need to know the amount of hydrogen in the water. Since water has two hydrogen atoms and one oxygen atom, the molar mass of water is 18.015 g/mol.

Using the molar mass of water, we can calculate the number of moles of water produced:

68.1 g ÷ 18.015 g/mol = 3.78 mol

Since there are two hydrogen atoms in each molecule of water, there must be twice as many moles of hydrogen as there are moles of water:

3.78 mol × 2 = 7.56 mol of hydrogen

Finally, we can use the balanced chemical equation for the reaction of hydrogen and oxygen to form water to determine the number of moles of oxygen consumed:

2H2 + O2 -> 2H2O

For every 1 mole of oxygen consumed, 2 moles of water are produced. Therefore, the number of moles of oxygen consumed is:

7.56 mol H2O ÷ 2 = 3.78 mol O2

So, 3.78 moles of oxygen would be consumed to produce 68.1g of water.

Answer:

d. Light energy to chemical energy

Explanation:

This is because photosynthesis converts light energy into chemical energy in the form of sugars or other carbon compounds.

The other options are not correct because they do not match the actual steps of photosynthesis. Chemical energy to light energy is the reverse of what happens in photosynthesis. Light energy to electrical energy and electrical energy to light energy are not involved in photosynthesis at all.

During photosynthesis, plants convert light energy into chemical energy. Therefore, the correct option is d) Light energy to chemical energy.

In photosynthesis, plants use pigments, such as chlorophyll, to absorb light energy from the sun. This light energy is then used to power a series of chemical reactions in the chloroplasts of plant cells. These reactions involve the conversion of carbon dioxide and water into glucose (a sugar) and oxygen.

The process can be summarized as follows:

1. Light energy from the sun is absorbed by chlorophyll molecules in the chloroplasts of plant cells.

2. This absorbed light energy is used to split water molecules into hydrogen ions (H+) and oxygen atoms.

3. The hydrogen ions are then combined with carbon dioxide (CO2) from the air to produce glucose (C6H12O6).

4. Oxygen gas (O2) is released as a byproduct of photosynthesis.

Overall, photosynthesis is an essential process for plants as it enables them to convert light energy into chemical energy in the form of glucose. This chemical energy can then be used by the plant for growth, reproduction, and other metabolic processes.

Schemes for the formation of bonds:

The schemes for the formation of bonds between the atoms of the following elements are:

Carbon and phosphorus:

C + P → CP

This is an example of a covalent bond, which is a type of bond that is formed by the sharing of electrons. In this case, the carbon atom shares one electron with the phosphorus atom, forming a single covalent bond.

Sulfur:

S + S → S₈

This is an example of a molecular bond, which is a type of bond that is formed by the sharing of electrons between multiple atoms of the same element. In this case, the sulfur atoms share two electrons each, forming a double bond.

Magnesium and silicon:

Mg + Si → Mg₂Si

This is an example of an ionic bond, which is a type of bond that is formed by the transfer of electrons from one atom to another. In this case, the magnesium atom gives up two electrons to the silicon atom, forming a magnesium ion with a charge of +2 and a silicon ion with a charge of -4. These ions are then attracted to each other by the opposite charges.

2. The types of bonds and crystal lattices for the following elements:

CaO: ionic bond, ionic lattice

C: covalent bond, diamond lattice

SiO₂: covalent bond, tetrahedral lattice

Fe: metallic bond, body-centered cubic lattice

K₃N: ionic bond, cubic lattice

3. The processes depicted by the following diagrams, along with the corresponding electronic balances:

Cu0 → Cu⁺²: oxidation

Cu0 → Cu⁺² + 2e⁻

S0⁻ → S⁻²: reduction

S0⁻- + 2e⁻ → S⁻²

Fe⁺³ → Fe⁺²: reduction

Fe⁺³ + 1e⁻ → Fe⁺²

4. The redox reactions and the coefficients arranged by the electronic balance method:

H₂O + CO₂ → HCL + O₂

2H⁺ + ¹/₂O₂ → HCL

2e⁻ + 2H⁺ → H₂

¹/₂O₂ + 2e⁻ → O₂⁻

Fe₂O₃ + H₂ → Fe + H₂O

Fe₂O₃ + 3H₂ → 2Fe + 3H₂O

3Fe⁺³ + 6e⁻ + 6H⁺ → 2Fe + 6H₂O

2O₂⁻ + 6H⁺ → 4H₂O

H₂SO₄ + S → SO₂ + H₂O

2H⁺ + SO₄²⁻ → SO₂ + H₂O

2e⁻ + 2H+ → H₂

S → S²⁻ + 2e⁻

Find out more on bond here: https://brainly.com/question/29282058

#SPJ1