Using scientific methods to investigate natural phenomena has many benefits. Which of the
following describes a benefit of using scientific methods?


A.getting results that are based on empirical evidence

B.getting only results that are scientific truths

C.getting results that do not need to be repeated

D.getting results that always support a hypothesis

Answers

Answer 1

Answer:

B.getting only results that are scientific truths

Answer 2
the correct answer is A.

Related Questions

How does the pacific ocean help explain the weather differences between San Francisco and Kansas city? If possible, discuss your answer.

Answers

The Pacific Ocean is near San Francisco, the high heat capacity of water absorbs large amounts of heat. The humidity in Kansas City is higher, water in the air absorbs heat which makes people feel more hot.

The presence of pacific ocean causes weather differences between San Francisco and Kansas city.

The pacific ocean helps in explaining the weather differences between San Francisco and Kansas city because San Francisco is located near the pacific ocean which has great effect on its climate while on the other hand, Kansas city is located far from the pacific ocean which have less or no effect on the climate of the Kansas city.

San Francisco has hot, dry summers and cool, rainy winters due to presence near the pacific ocean whereas the climate of Kansas City has cold winters and hot summers with frequent thunderstorms so we can conclude that the presence of pacific ocean causes weather differences between San Francisco and Kansas city.

Learn more: https://brainly.com/question/21565755

What devices use radio waves?

Answers

Answer:

television and remote controlled stuff

Explanation:

Answer:

radios

television

cellular phones

walkie talkies

computers

radar

sonar

telescopes

satellites

missiles

rockets

Fill in the Blank: Different wavelengths of light have different ______

Answers

Answer:

energy levels.

What are 3 characteristics of bacteria?

Answers

Answer:

:')

Explanation:

lack of membrane-bound organelles, unicellular and small size.

Answer:

There are three notable common traits of bacteria, 1) lack of membrane-bound organelles, 2) unicellular and 3) small (usually microscopic) size. Not all prokaryotes are bacteria, some are archaea, which although they share common physicals features to bacteria, are ancestrally different from bacteria.

Biotechnology: Genetic Modification Technologies
How is genome editing being used in agriculture, genetics research, and medicine? What is an advantage of its use in each area?

Answers

Genome editing technologies, such as CRISPR-Cas9, are being used in a variety of fields, including agriculture, genetics research, and medicine. Here are some examples of how genome editing is being used in each area and an advantage of its use:

1. Agriculture: Genome editing is being used to develop crops that are more resistant to pests and diseases, have a longer shelf life, and are more nutritious. An advantage of using genome editing in agriculture is that it can be a more precise and efficient method of genetic modification compared to traditional breeding methods.

2. Genetics research: Genome editing is being used to study the function of genes and their role in various diseases. It can also be used to create animal models of human diseases, which can be used to test potential treatments. An advantage of using genome editing in genetics research is that it allows scientists to study the effects of specific genetic changes in a controlled environment.

3. Medicine: Genome editing is being used to develop new treatments for genetic diseases, such as sickle cell anemia and cystic fibrosis. It can also be used to modify immune cells to better target cancer cells. An advantage of using genome editing in medicine is that it has the potential to be a more targeted and precise method of treatment, which can lead to fewer side effects and better outcomes for patients.

Genome editing, is being applied across agriculture, genetics research, and medicine.

In agriculture, it allows modification of crop genomes to enhance yield, resistance to pests and diseases, and nutritional content, leading to increased food production and sustainability.

In genetics research, genome editing enables the study of gene function and disease mechanisms, accelerating the development of targeted therapies and advancements in medicines. In medicine, it offers the cure of genetic disorders by modifying disease-causing genes, previously untreatable conditions.

The advantage lies in improved crop productivity and sustainability in agriculture, accelerated genetic discoveries in research, and potential cures for genetic diseases, positively impacting global scientific understanding.

learn more about genetic modification :

https://brainly.com/question/18378688

plz help me i need rn

Answers

Answer:

....C

Explanation:

Answer:

option d...hope it helps and don'ts copy in the test

Match the terms to the definition.

Question 1 options:

The idea of that the Earth and planets orbit the sun. A sun-centered view.


Huge clusters of stars, gas, and dust bound by the force of gravity.


A group of objects that orbit a star.


Jupiter, Saturn, Uranus, Neptune. Gas giants.


The spinning of a planet on its axis, causing day and night.


The orbit of a planet around the sun. On Earth, one year.


Mercury, Venus, Earth, Mars. Terrestrial, rocky.


A force of attraction that keeps planets orbiting the sun.


A rock that has entered Earth's atmosphere, leaving a streak of light in the night sky.


The theory the universe came forth from a single spot in an enormous explosion.

1.
Big Bang

2.
Doppler Effect

3.
Nebula

4.
Solar System

5.
Geocentric theory

6.
Heliocentric theory

7.
Gravity

8.
Galaxy

9.
Rotation

10.
Revolution

11.
Inner planets

12.
Outer planets

13.
Meteor

14.
Meteorite

15.
Meteoroid

Answers

1. Big Bang:- The theory the universe came forth from a single spot in an enormous explosion.

3. Nebula:- Huge clusters of stars, gas, and dust bound by the force of gravity.

4. Solar System:- A group of objects that orbit a star (Sun)

6. Heliocentric theory:- The idea that the Earth and planets orbit the sun. A sun-centered view.

7. Gravity:- A force of attraction that keeps planets orbiting the sun.

8. Galaxy:- Huge clusters of stars, gas, and dust bound by the force of gravity.

9. Rotation:- The spinning of a planet on its axis, causing day and night.

10. Revolution:- The orbit of a planet around the sun. On Earth, one year.

11. Inner planets:- Mercury, Venus, Earth, Mars. Terrestrial, rocky.

12. Outer planets:- Jupiter, Saturn, Uranus, Neptune. Gas giants.

13. Meteor:- A rock that has entered Earth's atmosphere, leaving a streak of light in the night sky.

For further information on such terms nad definitions,

https://brainly.in/question/1185001

The solar system consists of many planets, moons, stars, asteroids, comets, and meteoroids, which itself is a part of the milky way galaxy. Beyond this are millions of galaxies that constitute the universe.

Big Bang is the theory the universe came forth from a single spot in an enormous explosion. Solar System is a group of objects that orbit a star. The heliocentric theory is the idea that the Earth and planets orbit the sun, a sun-centered view. Gravity is a force of attraction that keeps planets orbiting the sun.
Galaxy is a huge cluster of stars, gas, and dust bound by the force of gravity. Rotation is the spinning of a planet on its axis, causing day and night. Revolution is the orbit of a planet around the sun. On Earth, one year. The inner planets are Mercury, Venus, Earth, and Mars. Terrestrial and rocky. Outer planets are Jupiter, Saturn, Uranus, Neptune, and Gas giants.
Meteor is a rock that has entered Earth's atmosphere, leaving a streak of light in the night sky.

Learn more about the Universe:
https://brainly.com/question/805395

Explain how scientist might use a Dichotomas key/chart

PLEASE DONT SOMETIHNG RANDOM I WILL REPORT IF YOU DO

Answers

Answer:

A scientist might use a dichotomous key to classify an organism.

Explanation:

Dichotomous keys are used to identify organisms based on their observable traits.

I am approximately 22 feet long, andam a part of your digestive system. I also help you absorb nutrients from the food you eat. What am I?

i need help i have been stuck on this for awhile qwq

Answers

It’s the small intestine

THE TAKING OF AIR RICH IN OXYGEN INTO THE BODY IS CALLED _

Answers

Answer:

Inhalation

Explanation:

hope its correct

Answer:

HELLO!!!

SO UR ANSWER IS...

Taking in of air rich in oxygen into the body is called INHALATION.

Thanks I hope it helps

CAN I GET HELP PLEASE TYSM GET POINTS

Answers

Answer: The answer is Rockskipper and convict tang are omnivores.

Explanation:

Researching the dietary preferences of peacock flounders and other marine organisms can be achieved through a simple search or by seeking information on the eating habits of convict tangs, zooplankton, phytoplankton, and rock skippers. I have the pertinent information readily available for your perusal. Please, mark me brainiest.

Answer: Rockskipper, Convict tang

answer pleaseeeee .................

Answers

Wait what are we suppose to answer ?

Answer:

The life of a red blood cell is one of repetition and of enrichment. We begin at the heart, as an un-enrichied blood cell, we travel through the ventricles and into the lungs, we travel along the lung sack and become enriched with oxygen, the arteries are slow and calm as the human is not moving too often, we travel to the legs where we enrich the muscles through the capillaries and enter the veins which will bring us back to the heart and continue the cycle again.

This is for a project at school
For those into the hobby of aquascaping what type of driftwood do you prefer?
A. Malaysian driftwood
B. Cholla wood
C. Mopani wood
D. Bogwood

Answers

Answer:

B or C they both look good

Explanation:

B is a good answer and also A I would say

Gravitropism is a coordinated process of differential growth by a plant in response to gravity pulling on it. It also occurs in fungi. Is this true?


OKAY SO IK THE ANSWER BUT NOW THAT ALL THE MODERATORS ARE GONE FREEEE POINNNNTSSSSSS!!!!!

Answers

Answer:

Gravitropism (also known as geotropism) is a coordinated process of differential growth by a plant in response to gravity pulling on it. It also occurs in fungi. Gravity can be either "artificial gravity" or natural gravity. It is a general feature of all higher and many lower plants as well as other organisms.

Explanation:

i totally didnt copy and paste your answer into the search bar or anything

How many TOTAL atoms are in this compound?

H2C3O4N5

Answers

Answer:

14 atoms

Explanation:

14 atoms in this compound

Drag the labels to identify whether each image mainly shows mechanical weathering or chemical weathering. Each label can be used more than once.

Answers

The holes in rock and the rusting statue is chemical weathering and the desert rock and the snow valley are mechanical weathering.

We can see here that identifying whether each image mainly shows mechanical weathering or chemical weathering, we have:

Image 1: Chemical weathering.

Image 2: Mechanical weathering.

Image 3: Chemical weathering.

Image 4: Chemical weathering.

What is chemical weathering?

The breakdown and alteration of rocks and minerals by chemical reactions with water, gases, and other elements in the environment is known as chemical weathering.

Both the creation of new minerals and the disintegration of old minerals into smaller particles are possible outcomes of chemical weathering.

Learn more about chemical weathering on https://brainly.com/question/29784355

#SPJ1

PLEASE HELPME OUT I WILL GIVE BRAINLIESTUOSDFODH

Answers

Answer:

Manta ray and trigger fish

Explanation:

Both of these are feeding on primary consumers, which are consuming plants (the producers).

Manta ray and Trigger fish

Why do animals not have photosynthesis?


A. animals have chloroplasts


B. animals do not have chloroplasts


C. animals have vacuoles


D. animals have cell walls

Answers

b. animals do not have chloroplasts.

A herbicide is a chemical that kills plants. Which best describes the effect of a herbicide being
applied to all of the plants in a food web?

A.All organisms would be affected

B.Only primary consumers would be affected.

C.Producers and decomposers would be the only populations affected.

D.Primary and secondary consumers would be affected, but tertiary consumers would not

Answers

A. All organisms would be affected
Because plants are the producers and food source to herbivores which are food for carnivores.

Answer:

A. All organisms would be affected...

I'LL GIVE BRAINLIEST:

Answers

It should be A and C.

It’s b and c because cells are the building blocks of life

PART A: Which of the following best describes the central idea of the text?

Group of answer choices

People like buying experiences and products, but they gain more joy from the experiences that purchase than the products.

People gain more joy from buying experiences than buying products, but scientists have no explanation for why this happens.

People gain just as much joy from buying temporary experiences as they do from buying lasting products.

People feel negatively about buying products and positively about buying experiences.

Answers

Number 1 because it tells you that they liked experiences better than products because they were more likely have to wait to get those products. Paragraph 5 has the answer to the question.

True or False: The Calvin cycle is also known as the “light-dependent reaction” because it needs sunlight.

Answers

Answer:

false

Explanation: The Calvin Cycle, or light independent reaction, does not utilize sunlight as an input. During the light independent reaction, or the Calvin Cycle, carbon fixation first occurs. CO2 produced during the light dependent reaction reacts with RuBP, ultimately producing PGA.

Have a nice day!

False. The Calvin cycle is also known as the "light-independent reaction" because it does not require sunlight. The Calvin cycle is the process that plants use to convert carbon dioxide into glucose, and it takes place in the stroma of the chloroplasts. The light-dependent reactions, on the other hand, occur in the thylakoid membranes of the chloroplasts and require sunlight to produce energy in the form of ATP and NADPH, which are used to power the Calvin cycle.

the grasses that cover the prairies in America are disappearing. The soil is good and there is enough rain. What is MOST LIKELY causing the grass to disappear?

USATESTPREP!!!! IT IS AN ANSWER TO THAT MULTIPLE CHOICE ANSWER!!!!!!

YOU GET 25 POINTS IF YOU ANSWER ME NOW!!!!!

Answers

Answer: the scorching sun

Explanation:   As the prairies are under the most sunny regions of America

what is this question about

Please help me with the image that I am going to attach! I am very confused

Answers

Answer:

12

Explanation:

It’s 12 because of the pattern in the table

solar energy from the sun drives the water cycle. Using the words in the diagram, explain how the sun drives the movement of water into the atmosphere and back down to earth.

Answers

precipitation

Explanation:

Solar energy grants high-quality quantities of electricity to Earth each day maximum of which is going to the sea which cowl 75% of the Earth the daylight heats up the water inflicting it to evaporate because the water this is now withinside the shape of a fuel line Rises to the top atmospheres and condensates as it's miles condensation it will become dense and begins off evolved to precipitate on a mountain or everywhere on Earth for that depend supposing the water this is now precipitate lands Mountain which comes down as a shape of Water via way of means of a river that flows down that.

The river water reaches the sea and it occurs again and again once more inflicting the water cycle to be powered via way of means of the solar electricity.

What is solar energy?

Solar energy is the energy provided by the sun capable of producing heat and causing a chemical reaction.

Hence it concluded that solar energy from the sun drives the water cycle.

To know more about solar energy refer to the link:

https://brainly.com/question/17711999

Lol Answer This. Good Luck

Answers

Answer:

A

Explanation:

Message travels through the spinal cord

Answer:

D

Explanation:

Sorry if you get this wrong but I am pretty sure the message gets sent to the brain before you take action. So yeah.

⊙﹏⊙

Biotechnology: Genetic Modification Technologies
What are six ethical concerns that people have about genetic modification?

Answers

Answer:
Genetic Modification technology
:  It is a method that includes adding DNA into an organism's genome where the DNA is transferred into plant cell.

Explanation:

The ethical concerns are

1. SAFETY is the primary concern due to the likelihood of off-target consequences (edits in the wrong spot) and mosaicism (where some cells carry the edit but others do not).

2. INFORMED CONSENT

3. JUSTICE AND EQUITY

4. GENOME- EDITING RESEARCH INVOLVING EMBRYOS
5. POTENTIAL DAMAGE TO THE ENVIRONMENT

6.  EXCESSIVE CORPORATE DOMINANCE

Learn more about the ethical concerns:

https://www.genome.gov/about-genomics/policy-issues/Genome-Editing/ethical-concerns

The geneyic modification os general

Put an X next to all the statements that can be considered signs of global warming.

A. The concentration of CO2 is at 400 parts per million (ppm) today. It has never been more than 300 ppm in the past 800,000 years.

B. Global sea level rose about 6.7 in. in the past century. The rate in the past decade, however, is nearly double that of the past century.

C. Since 1880, the 10 hottest years on record have been in the past 17 years.

D. Antarctica lost about 36 cubic miles of ice between 2002 and 2005.

E. Since the beginning of the Industrial Revolution in the 1880s, the acidity of surface ocean waters has increased by about 30 percent.

F. The area covered by sea ice in the Arctic at the end of summer has shrunk by about 40% since 1979.

G. Currently, 37 glaciers in Glacier National Park are retreating.

H. Since 1990, data show that birds are beginning their northern migration earlier and earlier each year—particularly birds that migrate over shorter distances. They are having trouble finding their normal food sources at their destination.

I. The amount of heavy downpours has increased 74% in New England from 1958
to 2011.

Answers

Answer:

A. X

B. X

C. X

D. X

E. X

F. X

G. X

H. X

I. X

All of these statements can be considered signs of global warming. They provide evidence of changes in the Earth's climate that are consistent with the predictions of climate models and the understanding of the underlying physical processes.

Biotechnology: Genetic Modification Technologies
What are three ways that genetic engineering is being used with animals? Give an example of each.

Answers

Genetic engineering in animals is used to enhance agricultural productivity. For example, scientists have genetically modified livestock such as cows and pigs to increase their growth rate or improve their meat quality. By inserting genes responsible for accelerated growth or enhanced muscle development, farmers can produce larger and more efficient animals for meat production.
Genetic engineering is also employed to create disease-resistant animals. Scientists have developed genetically modified mosquitoes with altered genes that make them resistant to certain diseases like malaria or dengue fever. These modified mosquitoes can help control the spread of these diseases by reducing the mosquito population that carries and transmits them.
Genetic engineering is utilized to produce pharmaceutical products using animals. This process, known as biopharming, involves genetically modifying animals, such as goats or rabbits, to produce specific proteins or antibodies in their milk or eggs. These proteins can then be harvested and used for the production of therapeutic drugs, vaccines, or other medical treatments.
It's important to note that the field of genetic engineering is vast and constantly evolving, and there are various other applications and examples of genetic engineering in animals beyond the ones mentioned above.

Answer: Genetic engineering is being used with animals in various ways.

Explanation:

Disease Research and Biomedical Applications: Genetic engineering enables the creation of animal models with specific genetic modifications to study diseases and develop potential treatments. For instance, scientists have created genetically modified mice that carry mutations associated with human diseases like cancer or Alzheimer's.

Agricultural and Livestock Improvement: Genetic engineering is employed in agriculture to enhance traits in livestock and improve agricultural productivity. For example, researchers have developed genetically modified pigs that are more resistant to specific diseases, such as Porcine Reproductive and Respiratory Syndrome (PRRS).

Conservation and Species Preservation: Genetic engineering has the potential to contribute to conservation efforts and species preservation. One example is the use of assisted reproductive technologies, such as in vitro fertilization (IVF) and embryo transfer, to help save endangered species.

To learn more about Genetic Modification:

https://brainly.com/question/16733706

https://brainly.com/question/29022178

HELP ME PLEASE WITH THIS

Answers

Answer:

Producer and consumer

Explanation:

Answers can include any of the following, I’ll separate them with commas.
Parasitism, symbiosis, mutualism, commensalism, and predation.

Explanation;
Each of these are relationships found in nature, including predation which was mentioned in the question. They all serve to represent different relationships and excluding symbiosis which acts as an umbrella term for some of the terms listed, they are all unique and mutually exclusive.
Other Questions
Suppose R = 3, 2, 4, 3, 4, 2, 2, 3, 4, 5, 6, 7, 7, 6, 5, 4, 5, 6, 7, 2, 1 is a page reference stream.a) Given a page frame allocation of 3 and assuming the primary memory is initially unloaded, how many page faults will the given reference stream incur under Belady's optimal algorithm?b) Given page frame allocation of 3 and assuming the primary memory is initially unloaded, how many page faults will the given references stream incur under LRU algorithim?c) Given a page frame allocation of 3 and assuming the primary memory is initially unloaded, how many page faults will the given reference stream incur under FIFO algorithm?d) Given a window size of 6 and assuming the primary memory is initially unloaded, how many page faults will the given reference stream incur under the working-set algorithm?e) Given a window size of 6 and assuming the primary memory is initially unloaded, what is the working-set size under the given reference stream after the entire stream has been processed? Did RR or TV increase more from rest to 60% HRR? What about him 60% HRR to test termination is this a normal response?Were the Tvent values obtained from the 3 methods consistent if not hypothesis on why these were difference? A stock split does not apply to a. treasury shares b. issued shares c. preferred shares d. common shares python assighment 12 not whole question For this assignment, you will write a series of methods which are designed to help you analyze how often different words appear in text. You will be provided texts as lists of words, and you will use dictionaries to help with your analysis.Methods to writeMethodDescriptionget_word_counts(word_list)This method will take a list parameter and return a dictionary which has as its keys the words from the list, and has as its values the number of times that word appears in the list. So, for example, if you have the following list:words = ["to", "be", "or", "not", "to", "be"] thenget_word_counts(words)should return this dictionary:{'to': 2, 'be': 2, 'or': 1, 'not': 1}number_of_appearances(word_counts, word)This method takes a dictionary of word counts (like the one returned from yourget_word_countsmethod) as a parameter and a single word. It returns the number of times thatwordappears in the text (i.e. the value if it exists in the dictionary, or 0 otherwise).total_words(word_counts)This method takes a dictionary of word counts (like the one returned from yourget_word_countsmethod) as a parameter. It returns the total number of words from the text (i.e. the sum of all the values).most_common(word_counts)This method takes a dictionary of word counts (like the one returned from yourget_word_countsmethod) as a parameter. It returns the word which appears the most frequently (i.e. the key with the highest value in the dictionary). Don't worry if there is more than one most common word; any correct answer should pass the grader, as it will be tested only on word count dictionaries with a single most common word.single_words(word_counts)This method takes a dictionary of word counts (like the one returned from yourget_word_countsmethod) as a parameter. It returns a list containing every word which appears exactly once (i.e. every key which has a value of 1).get_combined_counts(word_counts_a, word_counts_b)This method takes two dictionaries of word counts (like the one returned from yourget_word_countsmethod) as parameters. It returns a single dictionary which combines the totals from both.The starter code already contains the following lines of code to test your methods on some words from two classic Beatles songs.words = ['oh', 'i', 'need', 'your', 'love', 'babe', 'guess', 'you', 'know', 'its', 'true', 'hope', 'you', 'need', 'my', 'love', 'babe', 'just', 'like', 'i', 'need', 'you', 'hold', 'me', 'love', 'me', 'hold', 'me', 'love', 'me', 'i', 'aint', 'got', 'nothing', 'but', 'love', 'babe', 'eight', 'days', 'a', 'week', 'love', 'you', 'every', 'day', 'girl', 'always', 'on', 'my', 'mind', 'one', 'thing', 'i', 'can', 'say', 'girl', 'love', 'you', 'all', 'the', 'time', 'hold', 'me', 'love', 'me', 'hold', 'me', 'love', 'me', 'i', 'aint', 'got', 'nothing', 'but', 'love', 'girl', 'eight', 'days', 'a', 'week', 'eight', 'days', 'a', 'week', 'i', 'love', 'you', 'eight', 'days', 'a', 'week', 'is', 'not', 'enough', 'to', 'show', 'i', 'care']counts = get_word_counts(words)print("WORD COUNTS")for word in sorted(counts): print(word, counts[word])print()print("Appearances of 'need':", number_of_appearances(counts, "need"))print("Appearances of 'want':", number_of_appearances(counts, "want"))print()print("Total words:", total_words(counts))print("Most common word:", most_common(counts))print()print("SINGLE WORDS")for word in sorted(single_words(counts)): print(word)print()other_words = ['love', 'love', 'me', 'do', 'you', 'know', 'i', 'love', 'you', 'ill', 'always', 'be', 'true', 'so', 'please', 'love', 'me', 'do', 'whoa', 'love', 'me', 'do', 'love', 'love', 'me', 'do', 'you', 'know', 'i', 'love', 'you', 'ill', 'always', 'be', 'true', 'so', 'please', 'love', 'me', 'do', 'whoa', 'love', 'me', 'do', 'someone', 'to', 'love', 'somebody', 'new', 'someone', 'to', 'love', 'someone', 'like', 'you']other_counts = get_word_counts(other_words)print("OTHER WORD COUNTS")for word in sorted(other_counts): print(word, other_counts[word])print()combined_counts = get_combined_counts(counts, other_counts)print("COMBINED WORD COUNTS")for word in sorted(combined_counts): print(word, combined_counts[word])You should uncomment lines to test your methods as you go along. Leave these lines uncommented when you submit your code, as the grader will use them for one of the tests.If you want to transform your own text to a list so you can analyze it using your methods, here is some simple code you can use to change a passage into a list. Be warned - it may not work if your text contains quotation marks or line breaks. with type 2 diabetes (called juvenile-onset or insulin-dependent diabetes), the bodys immune system attacks the insulin-producing beta cells in the pancreas and destroys them.] TRUE/FALSE write a short a paragraph Travel and Touris a negative charge Q1 = -5.50 is located at a point x1=-6.00 abd. positive chsrge Q2= 6.50 uc is located at point x2= 4.00 m find the magnitude and direction of the electric force between rhe charges 1320. Mass of one-dimensional objects Find the mass of the following thin bars with the given density function. 13. p(x) = 1 + sin x, for 0 SX SA maslow proposed that most people in late adulthood _____ through the process of self-actualization. a. how did reagans approach to the soviet union different from his predecessors? Match the oil and gas terms below with the correct description. What are the two most important factors in the process of generating oil from organic remains? describe the hybrid orbitals used and the number of each type of bond formed by the central carbon atom in hco2h . in a ______ network, computers communicate directly with one another and can share resources usually without requiring a network administrator. why do we measure the p-p voltage drop across the sensing resistor indirectly, with the dmm and not with the oscilloscope Which combination is NOT correct? (A) coppert'II) oxide (B) lead(1) oxide (C) potassium permanganate KMno (D) sodium nitride The name of SO, is CuO ???. Na,N if someone listens to a series of phonemes that smoothly and continuously morphs between "bah" and "dah" in four steps, she most likely hears the interest charged on a $100,000 note payable, at the rate of 6%, on a 90-day note would be select one: a. $1,500. b. $500. c. $6,000. d. $3,333. The woods co. and the mickelson co. have both announced ipos at $43 per share. one of these is undervalued by $20, and the over is overvalued by $14, but you have no way of knowing which is which. you plan on buying 1,000 shares of each issue. if an issue is underpriced, it will be rationed, and only half your order will be filled. what is the amount of the difference between your expected profit and the amount of profit you could earn if you could get 1,000 shares of woods and 1,000 shares of mickelson? In Problems 4754 find the eigenvalues and eigenvectors of the given matrix.|2 1||2 1| let p(a) = 0.6, p(b) = 0.3, and p(ab)c = 0.1. calculate p(ab).