Based on the analysis of the standard electrode potentials table, we can conclude that statement D - Br2 can oxidize Ni, and H2 can reduce Mn2+ is completely true, while the other statements are partially true or completely false.
To determine which of the statements is completely true, we need to use the standard electrode potentials table to determine whether each reaction is feasible or not.
A. Cu2+ can oxidize H2, and Fe can reduce Mn2+.
The standard electrode potential for the Cu2+/Cu couple is +0.34V, while that for the H+/H2 couple is 0.00V. This means that Cu2+ cannot oxidize H2.
B. Ni2+ can oxidize Cu2+, and Fe2+ can reduce H+.
The standard electrode potential for the Ni2+/Ni couple is -0.25V, while that for the Cu2+/Cu couple is +0.34V. This means that Ni2+ cannot oxidize Cu2+.
C. Fe2+ can oxidize H2, and Fe2+ can reduce Au3+.
The standard electrode potential for the Fe2+/Fe couple is -0.44V, while that for the H+/H2 couple is 0.00V.
D. Br2 can oxidize Ni, and H2 can reduce Mn2+.
The standard electrode potential for the Br2/Br couple is +1.07V, while that for the Ni2+/Ni couple is -0.25V.
E. H+ can oxidize Fe, and Ni can reduce Br2.
The standard electrode potential for the H+/H2 couple is 0.00V, while that for the Fe3+/Fe couple is -0.44V.
For such more question on electrode:
https://brainly.com/question/18251415
#SPJ11
The standard electrode potentials table determines electron flow in redox reactions. Only statement E is completely true: H+ oxidizes Fe, and Ni reduces Br2, based on the relative reduction potentials.
The standard electrode potentials table can be used to determine the direction of the electron flow in a redox reaction. The more positive the potential, the stronger the oxidizing agent, and the more negative the potential, the stronger the reducing agent.
A. Cu2+ can oxidize H2, and Fe can reduce Mn2+.
According to the standard electrode potentials table, the reduction potential of Cu2+ is more positive than that of H+, which means that Cu2+ can oxidize H2. However, Fe has a reduction potential that is less positive than that of Mn2+, which means that Fe cannot reduce Mn2+. Therefore, this statement is partially true but not completely true.
B. Ni2+ can oxidize Cu2+, and Fe2+ can reduce H+.
According to the standard electrode potentials table, the reduction potential of Ni2+ is less positive than that of Cu2+, which means that Ni2+ cannot oxidize Cu2+. Additionally, Fe2+ has a reduction potential that is less positive than that of H+, which means that Fe2+ cannot reduce H+. Therefore, this statement is not true.
C. Fe2+ can oxidize H2, and Fe2+ can reduce Au3+.
According to the standard electrode potentials table, the reduction potential of Fe2+ is less positive than that of H+, which means that Fe2+ cannot oxidize H2. Additionally, the reduction potential of Fe2+ is more negative than that of Au3+, which means that Fe2+ cannot reduce Au3+. Therefore, this statement is not true.
D. Br2 can oxidize Ni, and H2 can reduce Mn2+.
According to the standard electrode potentials table, the reduction potential of Br2 is more positive than that of Ni, which means that Br2 can oxidize Ni. Additionally, the reduction potential of H2 is more negative than that of Mn2+, which means that H2 cannot reduce Mn2+. Therefore, this statement is partially true but not completely true.
E. H+ can oxidize Fe, and Ni can reduce Br2.
According to the standard electrode potentials table, the reduction potential of H+ is more positive than that of Fe, which means that H+ can oxidize Fe. Additionally, the reduction potential of Ni is more negative than that of Br2, which means that Ni can reduce Br2. Therefore, this statement is completely true.
Therefore, the completely true statement is E. H+ can oxidize Fe, and Ni can reduce Br2.
learn more about electrodes here:
https://brainly.com/question/17060277
#SPJ11
This substitution reaction is expected to be an SN ____▼. mechanism because the leaving group, ____▼. is on a carbon that is ____▼. Identify the most likely sequence of steps in the mechanism: Step 1: ____▼. Step 2: ____▼. Step 3: ____▼.
This substitution reaction is expected to be an SN2 mechanism because the leaving group, which is not mentioned in the question, is on a carbon that is primary.
In SN2 mechanism, the nucleophile attacks the electrophilic carbon center at the same time as the leaving group departs. This type of reaction usually occurs with primary and secondary carbon centers, where the nucleophile can access the carbon atom without steric hindrance.
The most likely sequence of steps in the SN2 mechanism is as follows:
Step 1: Nucleophile attacks the carbon center simultaneously as the leaving group departs, resulting in a transition state where the carbon is bonded to both the nucleophile and the leaving group.
Step 2: The bond between the carbon and the leaving group is completely broken, and the nucleophile becomes fully bonded to the carbon.
Step 3: The reaction product is formed, and the nucleophile and leaving group are in their final positions.
Overall, SN2 mechanism is a bimolecular reaction that involves the simultaneous interaction between the nucleophile and the electrophilic carbon center.
To know more about "SN2 mechanism" refer here:
https://brainly.com/question/30631335#
#SPJ11
solid calcium hydroxide is dissolved in water until the ph of the solution is 10.94. what is the hydroxide ion concentration [oh–] of the solution?
The hydroxide ion concentration [OH⁻] of the solution is 3.98 x 10⁻⁴ M. Calcium hydroxide is a strong base that dissociates completely in water to produce calcium ions (Ca²⁺) and hydroxide ions (OH⁻).
Ca(OH)₂ → Ca²⁺ + 2OH⁻
To calculate the hydroxide ion concentration of the solution, we need to use the pH value given and the relationship between pH and the hydroxide ion concentration, which is: pH + pOH = 14
pOH = 14 - pH.From the question, the pH of the solution is 10.94, so:
pOH = 14 - 10.94 = 3.06
We can then use the pOH value to calculate the hydroxide ion concentration using the relationship between pOH and [OH⁻], which is:
pOH = -log[OH⁻]
[OH⁻] = 10^-pOH
Substituting the value of pOH into the equation, we get: [OH⁻] = 10^-3.06
[OH⁻] = 3.98 x 10⁻⁴ M.Therefore, the hydroxide ion concentration [OH⁻] of the solution is 3.98 x 10⁻⁴ M.
learn more about Calcium hydroxide here:
https://brainly.com/question/28206480
#SPJ11
An object has a mass of 0.255 kg and a density of 2.89 g/cm³. What is the volume of the object in cm³? O a.) 8.83 x 10-5 cm³ O b.) 0.011 cm³ O d.) 88.2 cm³ A 0.150 kg metallic block has a volume of 20.4 cm³. What is the density of the metallic block in g/cm³? a.) 3.06 x 10³ g/cm³ c.) 8.83 x 105 cm³ O b.) 7.35 g/cm³ O c.) 7.35 x 10-³ g/cm³ O d.) 7.35 x 10-5 g/cm³ Provide only answer. NO NEED FOR EXPLANATION.
An object has a mass of 0.255 kg and a density of 2.89 g/cm³. The volume of the object is d.) 88.2 cm³. A 0.150 kg metallic block has a volume of 20.4 cm³. The density of the metallic block is b.) 7.35 g/cm³.
To find the volume of the object with a mass of 0.255 kg and a density of 2.89 g/cm³, follow these steps:
1. Convert mass to grams: 0.255 kg * 1000 g/kg = 255 g
2. Use the formula for volume: volume = mass/density
3. Calculate the volume: 255 g / 2.89 g/cm³ ≈ 88.2 cm³
So, the correct answer for the first question is d.) 88.2 cm³.
To find the density of the metallic block with a mass of 0.150 kg and a volume of 20.4 cm³, follow these steps:
1. Convert mass to grams: 0.150 kg * 1000 g/kg = 150 g
2. Use the formula for density: density = mass/volume
3. Calculate the density: 150 g / 20.4 cm³ ≈ 7.35 g/cm³
So, the correct answer for the second question is b.) 7.35 g/cm³.
To learn more about density, refer:-
https://brainly.com/question/29775886
#SPJ11
What is the molarity of a solution where 1 mole of NaCl is dissolved to make 25 ML salt water solution?
A. 25 molar
B.40 molar
C. 0.04 Molar
D. 2.5 Molar
Answer: A
Explanation:
Consider the complex ions Co(NH3)63+, Co(CN)63− and CoF63−. The wavelengths of absorbed electromagnetic radiation for these compounds are (in no specific order) 770 nm, 440 nm, and 290 nm. Match the complex ion to the wavelength of absorbed electromagnetic radiation.
The complex ion Co(NH3)63+ matches with the wavelength of absorbed electromagnetic radiation of 770 nm, Co(CN)63− matches with the wavelength of 440 nm, and CoF63− matches with the wavelength of 290 nm.
To match the complex ions to the wavelength of absorbed electromagnetic radiation, we need to consider the nature of the ligands in each compound. The ligands surrounding the cobalt ion affect the energy levels and thus the wavelengths of light that can be absorbed.
Co(NH3)63+ has ammonia ligands, which are weak-field ligands, meaning they cause small splitting of energy levels. Therefore, it absorbs longer wavelengths of light. The wavelength of absorbed electromagnetic radiation for this compound is 770 nm.
Co(CN)63− has cyanide ligands, which are strong-field ligands, meaning they cause large splitting of energy levels. Therefore, it absorbs shorter wavelengths of light. The wavelength of absorbed electromagnetic radiation for this compound is 440 nm.
CoF63− has fluoride ligands, which are also strong-field ligands and cause large splitting of energy levels. Therefore, it absorbs even shorter wavelengths of light. The wavelength of absorbed electromagnetic radiation for this compound is 290 nm.
In summary, the complex ion Co(NH3)63+ matches with the wavelength of absorbed electromagnetic radiation of 770 nm, Co(CN)63− matches with the wavelength of 440 nm, and CoF63− matches with the wavelength of 290 nm.
To know more about electromagnetic radiation visit :
https://brainly.com/question/28954595
#SPJ11
as a chlorine atom is reduced, the number of protons in its nucleus select one: a. stays the same b. decreases c. either increases or decreases depending on the type of reaction d. increases
Answer: The correct answer is:
a. stays the same.
Explanation:
When a chlorine atom is reduced, it gains one or more electrons, resulting in the formation of a chloride ion (Cl⁻). The reduction process does not involve any changes in the number of protons in the nucleus of the chlorine atom. Protons are positively charged subatomic particles that determine the identity of an element, and they remain unchanged during a reduction reaction. Therefore, the number of protons in the nucleus of a chlorine atom stays the same during reduction.
To learn more about Reduction process from the given link
https://brainly.com/question/30281983
#SPJ4
The correct answer is:
a. stays the same.
When a chlorine atom is reduced, it gains one or more electrons, resulting in the formation of a chloride ion (Cl⁻). The reduction process does not involve any changes in the number of protons in the nucleus of the chlorine atom. Protons are positively charged subatomic particles that determine the identity of an element, and they remain unchanged during a reduction reaction. Therefore, the number of protons in the nucleus of a chlorine atom stays the same during reduction.
To learn more about Reduction process from the given link
brainly.com/question/30281983
#SPJ4
asymptotic relative efficiency (are) question: if hl in terms of t1, t2 and alpha
Asymptotic relative efficiency (ARE) is a measure of the efficiency of one statistical estimator relative to another estimator, as the sample size approaches infinity. In the context of your question, if hl is an estimator of a parameter in terms of t1, t2, and alpha, then we can compare its efficiency to another estimator using velocity .
To calculate ARE, we compare the variances of the two estimators as the sample size approaches infinity. Let's say we have two estimators, A and B, for the same parameter. We can calculate their variances as σ^2(A) and σ^2(B), respectively. Then, the ARE of estimator A relative to estimator B is given by the formula (A,B) = σ^2(B) / σ^2(A) If ARE(A,B) > 1, then estimator B is more efficient than estimator A, meaning it has a smaller variance and therefore produces more precise estimates. If ARE(A,B) = 1, then the two estimators are equally efficient. And if ARE(A,B) < 1, then estimator A is more efficient than estimator B.
To apply this to your specific question, we would need more information about the estimators involved and the parameter being estimated. But in general, ARE can be a useful tool for comparing the performance of different estimators, especially as the sample size grows larger. Asymptotic relative efficiency (ARE) is a measure used in statistics to compare the efficiencies of two estimators. It calculates the ratio of the variances of the two estimators as the sample size approaches infinity. Without the specific information on t1, t2, and α, we cannot provide an exact value for hl. But you can follow these steps to determine hl given the necessary information.
To know more about velocity visit :
https://brainly.com/question/17127206
#SPJ11
Dyes have very high molar absorptivity. Why is this an advantage for their use in food products?
The high molar absorptivity of dyes makes them highly efficient at absorbing light, even at very low concentrations. This is advantageous in food products because it allows for the use of very small amounts of dye to achieve the desired color intensity, minimizing the impact on the overall flavor and texture of the food.
Additionally, high molar absorptivity means that the dyes are highly visible, which helps to ensure that the product has a consistent and appealing appearance.
Overall, the use of dyes with high molar absorptivity is a practical way to achieve the desired visual appeal of food products without affecting the overall quality of the product.
To know more about the molar absorptivity refer here :
https://brainly.com/question/29439014#
#SPJ11
given a pipelined processor with 3 stages, what is the theoretical maximum speedup of the the pipelined design over a corresponding single-cycle design?
The theoretical maximum speedup of a pipelined processor with 3 stages over a corresponding single-cycle design is 3 times. This is due to each stage working concurrently, improving efficiency.
In a pipelined processor with 3 stages, the theoretical maximum speedup over a single-cycle design is 3 times. This is because, in a pipelined design, each stage of the processor works concurrently on different instructions, allowing for more efficient execution of tasks. In contrast, a single-cycle design requires the completion of each instruction sequentially, taking more time for the same number of instructions. The speedup factor is determined by the number of pipeline stages (in this case, 3) as it allows up to 3 instructions to be processed simultaneously. However, this speedup is only achievable under ideal conditions, and factors like pipeline stalls and branch hazards may reduce the actual speedup.
To know more about the pipelined design visit:
https://brainly.com/question/29309586
#SPJ11
_____ radiation can penetrate through several centimeters of lead.
Gamma radiation can penetrate through several centimeters of lead. Gamma radiation is a type of electromagnetic radiation that consists of high-energy photons.
Gamma radiation is produced during radioactive decay or nuclear reactions. Unlike alpha and beta particles, which can be stopped by thin sheets of paper or aluminum, gamma radiation is highly penetrating and requires denser materials, such as lead or concrete, to effectively attenuate its intensity.
This is due to the fact that gamma rays have no electric charge and minimal interaction with matter. The high energy and short wavelength of gamma radiation allow it to pass through most materials, including the human body.
However, the level of penetration depends on the energy of the gamma rays and the density of the material they encounter. Lead is often used as a shielding material in nuclear facilities or medical settings because of its high atomic number and density, which effectively absorbs and attenuates gamma radiation.
By placing several centimeters of lead between a source of gamma radiation and a target, the majority of the gamma rays can be blocked, reducing the potential harm to humans or sensitive equipment.
Learn more about Gamma radiation here:
https://brainly.com/question/20799041
#SPJ11
The molecule CO has a bond force constant of K=1860 Nm-1. Calculate the vibrational zero-point energy of this molecule. (u = 1.14 x 10^-26 kg) O 13.372 x 10^-20 J O 13.372 x 10^-22 J O 13.372 x 10^-21 J O x 13.372 x 10^-19 J
The vibrational zero-point energy of CO is 13.372 x 1[tex]0^{-20[/tex] J with a bond force constant of K=1860 Nm-1.
The vibrational zero-point energy is the minimum possible energy that a molecule can possess, which occurs when it is in its lowest vibrational energy state.
The zero-point energy can be calculated using the formula E=1/2*hbar*w, where hbar is the reduced Planck constant and w is the vibrational frequency.
For CO with a bond force constant of K=1860 Nm-1, the vibrational frequency can be calculated using the equation w=sqrt(K/u), where u is the reduced mass of the molecule.
Plugging in the values, we get a vibrational frequency of 2.135 x [tex]10^{13[/tex] Hz and a vibrational zero-point energy of 13.372 x [tex]10^{-20[/tex] J.
For more such questions on energy, click on:
https://brainly.com/question/5650115
#SPJ11
The vibrational zero-point energy of a molecule is the minimum energy that it possesses due to its vibrations at absolute zero temperature. This energy is directly proportional to the force constant and inversely proportional to the mass of the molecule.
Given that the bond force constant of CO is K=1860 Nm⁻¹and the mass of CO is u = 1.14 x 10⁻²⁶ kg, we can calculate the vibrational zero-point energy using the formula:
E = (h/2π) x (ν/2) x (ν/2) x (1/2π) x (1/2π) x (1/K) x m
where h is Planck's constant (6.626 x 10³⁴J s), ν is the vibrational frequency (which can be calculated using ν = (1/2π) x √(K/m), and m is the mass of the molecule.
Substituting the given values, we get:
ν = (1/2π) x √(1860/1.14 x 10⁻²⁶) = 1.42 x 10¹³ Hz
E = (6.626 x 10⁻³⁴ J s/2π) x (1.42 x 10¹³ Hz/2) x (1.42 x 10¹³ Hz/2) x (1/2π) x (1/2π) x (1/1860 Nm⁻¹) x (1.14 x 10⁻²⁶ kg) = 13.372 x 10⁻²¹ J
Therefore, the vibrational zero-point energy of CO is 13.372 x 10^-21 J. The answer is option C.
Learn more about molecule here:
https://brainly.com/question/30465503
#SPJ11
C: Titration Of KIT+ Additional Kt ClRunsvol NaOH Smol NaOH Suol KHT (M) KHT 1 2 3 (4 40mL 3.30mL 320mL 14.84810-4
The concentration of KHT in the titration, you will need to use the formula C1V1 = C2V2, where C1 is the concentration of NaOH, V1 is the volume of NaOH, C2 is the concentration of KHT, and V2 is the volume of KHT.
Titration is a common laboratory technique used to determine the concentration of a substance in a solution by reacting it with a known concentration of another substance. - In this case, KIT+ and Kt Cl are likely the substances being titrated with NaOH. - The columns labeled "Run," "svol," and "Smol" likely refer to the run number, the volume of NaOH added, and the moles of NaOH added, respectively. - The column labeled "Suol KHT (M)" likely refers to the concentration of KHT (potassium hydrogen tartrate) in the solution being titrated. - The values in the table are likely the results of calculations based on the volume and concentration of the substances used in the experiment.
Using the given data:
- Volume of NaOH (V1) = 3.30 mL (converted to L) = 0.00330 L
- Concentration of NaOH (C1) = 0.040 M
- Volume of KHT (V2) = 0.320 L
First, we will rearrange the formula to find the concentration of KHT (C2):
C2 = (C1V1) / V2
Next, we will plug in the given values:
C2 = (0.040 M * 0.00330 L) / 0.320 L
Finally, calculate the concentration of KHT (C2):
C2 ≈ 4.125 x 10^-4 M.
To know more about titration visit:
https://brainly.com/question/31271061
#SPJ11
The Hanes-Woolf plot, which plots the the ratio of substrate concentration to the reaction rate, [S]/u, versus the substrate concentration, [S], is a graphical representation of enzyme kinetics. This plot is typically used to determine the maximum rate, Vmax and the Michaelis constant, Km, which can be gleaned from the intercepts and slope. Identify each intercept and the slope in terms of the constants Vmaxand Km. Hanes-Woolf plot [S]/v Answer Bank 1/Km Km Vma Km Slope -VmakKm 1/Vmax -Km/Vmax -Vmax -1/Vmax -1/Km y-intercept x-intercept KmVmax -Km [S] Vmax Incorrect
The intercepts and slope in terms of the constants Vmax and Km in the Hanes-Woolf plot are:
- The y-intercept is equal to Km/Vmax.
- The x-intercept is equal to -1/Km.
- The slope is equal to -Vmax/Km.
These relationships can be derived from the Hanes-Woolf equation, which is:
[S]/v = ([S]/Km) + (1/Vmax) * [S]
It's important to note that the correct representation of the Hanes-Woolf plot is [S]/v, where [S] refers to the substrate concentration and v represents the reaction rate.
By rearranging this equation, we can see that the y-intercept is Km/Vmax, the x-intercept is -1/Km, and the slope is -Vmax/Km.
These values can be used to calculate the kinetic parameters Vmax and Km for a given enzyme-catalyzed reaction.
To know more about Hanes-Woolf plot refer here
https://brainly.com/question/27733604#
#SPJ11
Histones can be covalently modified Place the terms in the appropriate blars to complete the sentences. Terms can be used once more than once, or not at all. Re Help phosphate The amino acids near the _______ onds of histones are typically modified The principal chemical modifications to histos are the addition of ___________ or _________ group Histone modifications occur at specific amino acids of histones H2A H2,H3 and _________ The shorthand nomenclature of H3K9ac describes that the at position of histone 3 hasan) _______________group mothy! N-terminal C terminal, lysine H4, acetyl , 1 sulfhydryl
Histones can be covalently modified in various ways. The amino acids near the N-terminal ends of histones are typically modified. The principal chemical modifications to histones are the addition of phosphate or acetyl group. Histone modifications occur at specific amino acids of histones H2A, H2, H3 and H4.
The shorthand nomenclature of H3K9ac describes that the lysine at position 9 of histone 3 has an acetyl group. Methylation can also occur at specific lysine residues such as H3K9me and H3K27me. These modifications can affect the structure of chromatin, leading to changes in gene expression and other cellular processes. Overall, histone modifications play a critical role in regulating gene expression and maintaining cellular homeostasis.
To know more about Histones visit :
https://brainly.com/question/31681646
#SPJ11
list all the factors that affect the amount of entropy of a system and describe how each of them does so
The amount of entropy of a system can be influenced by several factors, including temperature, pressure, volume, and the number of particles present. Temperature is a major factor that affects entropy as an increase in temperature can lead to an increase in the number of energy states accessible to the system, which can result in an increase in entropy.
Pressure can also impact entropy as an increase in pressure can lead to a decrease in the volume available to the system, which can limit the number of energy states accessible to the system, resulting in a decrease in entropy.
Volume is another important factor that affects entropy, as an increase in volume can lead to an increase in the number of energy states accessible to the system, resulting in an increase in entropy. Additionally, the number of particles present in a system can also influence entropy, as an increase in the number of particles can lead to an increase in the number of energy states accessible to the system, resulting in an increase in entropy.
In summary, the amount of entropy of a system can be influenced by several factors, including temperature, pressure, volume, and the number of particles present. Each of these factors impacts the number of energy states accessible to the system, which can result in changes to the entropy of the system.
To know more about entropy visit -
brainly.com/question/13135498
#SPJ11
The pain reliever codeine is a weak base with a Kb equal to 1.6x10-6. What is the pH of a 0.050 M aqueous codeine solution? 11.10 12.70 10.50 07.10
The pH of a 0.050 M aqueous codeine solution is calculated 10.30.
To find the pH of a 0.050 M aqueous codeine solution, we need to first determine the concentration of hydroxide ions (OH⁻) in the solution, since codeine is a weak base. We can do this using the Kb value of codeine:
Kb = [OH⁻][Codeine]/[CodeineOH⁺]
Since we are given the Kb value and the concentration of codeine, we can solve for [OH⁻]:
Kb = [OH⁻][Codeine]/[CodeineOH⁺]
1.6x10-6 = [OH⁻][0.050]/[CodeineOH⁺]
To simplify this equation, we can assume that [OH⁻] is much smaller than 0.050 (since codeine is a weak base, it will only partially dissociate in water to form OH⁻ ions). This means that we can neglect the change in [Codeine] due to its partial dissociation, and approximate [Codeine OH⁺] to be equal to 0.050 - [OH⁻]:
1.6x10-6 = [OH⁻][0.050]/(0.050 - [OH⁻])
Simplifying and solving for [OH⁻], we get:
[OH⁻] = 2.0x10-4 M
Now we can find the pH of the solution using the equation:
pH = 14 - pOH
pOH = -log[OH⁻] = -log(2.0x10-4) = 3.70
pH = 14 - 3.70 = 10.30
Therefore, the pH of a 0.050 M aqueous codeine solution is 10.30.
To know more about pH, refer
https://brainly.com/question/172153
#SPJ11
To solve this problem, we need to use the formula for calculating the pH of a weak base solution. The formula is pH = pKb + log([base]/[acid]), The Kb value for codeine is 1.6x10⁻⁶, so the pKb is 5.80 (-log(1.6x10⁻⁶)).
Next, we need to find the concentration of codeine-H+ in the solution. Since codeine and its conjugate acid are in equilibrium, we can use the equation Ka x Kb = Kw to calculate the Ka value for codeine-H+. Kw is the ion product constant for water, which is 1.0x10⁻¹⁴ at 25°C. Therefore, Ka = Kw/Kb = 6.25x10⁻⁹. Now we can use the equilibrium constant expression for the dissociation of codeine-H+ to find its concentration. The expression is Ka = [H+][codeine]/[codeine-H+]. At equilibrium, [H+] = [codeine-H+], so we can simplify the expression to Ka = [H+]²/[codeine]. Solving for [H+], we get [H+] = sqrt(Ka*[codeine]) = sqrt(6.25x10⁻⁹) = 1.25x10⁻⁵ M.
Finally, we can plug in the values we found into the pH formula. pH = pKb + log([base]/[acid]) = 5.80 + log(0.050/1.25x10⁻⁵) = 10.50. Therefore, the pH of a 0.050 M aqueous codeine solution is 10.50. In conclusion, the pH of a 0.050 M aqueous codeine solution is 10.50. We found this value by using the formula for calculating the pH of a weak base solution and solving for the concentration of codeine-H+ in the solution.
To know more about equilibrium visit:-
https://brainly.com/question/30694482
#SPJ11
A variety of reducing agents can be used to convert ketones to alcohols. From the list below choose the reagent being used in the reduction of 4-t-butylcyclohexanone. NaOH NaBH4 H2, Pd/C O LIAIH4
The reagent that can be used to convert 4-t-butylcyclohexanone to alcohol is NaBH4. NaBH4 is a mild reducing agent that is commonly used to reduce ketones and aldehydes to their corresponding alcohols.
It is a selective reducing agent that only reduces the carbonyl group and does not react with other functional groups in the molecule. NaBH4 is also used in the reduction of esters, carboxylic acids, and nitriles to alcohols. The reduction of ketones to alcohols using NaBH4 is a common laboratory reaction and is widely used in organic synthesis. The reaction proceeds via the formation of a complex between the ketone and NaBH4, followed by the transfer of hydride ion from NaBH4 to the carbonyl carbon, resulting in the formation of an alcohol. This reaction is a useful tool in the synthesis of complex molecules and is widely used in the pharmaceutical and chemical industries.
To know more about alcohols visit :
https://brainly.com/question/1216922
#SPJ11
What's the rate of heat change in watts of a circuit of 50 volts with a resistance of 10 ohms.
The rate of heat change in watts of a circuit with a voltage of 50 volts and a resistance of 10 ohms is 250 watts.
The rate of heat change, or power, can be calculated using the formula P = V²/R, where P is power in watts, V is voltage in volts, and R is resistance in ohms. Plugging in the given values, we get P = (50²)/10, which simplifies to P = 250 watts.
This means that the circuit is producing 250 watts of heat energy, and this rate of heat change can cause materials to melt or malfunction if the circuit is not designed to handle that level of power.
It is important to consider the power output of circuits when designing and using them to prevent damage or injury.
Learn more about heat energy here.
https://brainly.com/questions/29210982
#SPJ11
Complete and balance the following redox reaction in acidic solution. Be sure to include the proper phases for all species within the reaction.
ReO4^-(aq)+MnO2(s)==>Re(s)+MnO4^-(aq)
The balanced equation is:
6MnO2(s) + 7ReO4^-(aq) + 24H+ → 7Re(s) + 24H2O(l) + 6MnO4^-(aq)
The unbalanced equation is:
ReO4^-(aq) + MnO2(s) → Re(s) + MnO4^-(aq)
First, we need to determine the oxidation states of each element:
ReO4^-: Re is in the +7 oxidation state, while each O is in the -2 oxidation state, so the total charge on the ion is -1.
MnO2: Mn is in the +4 oxidation state, while each O is in the -2 oxidation state, so the compound has no overall charge.
We can see that Re is being reduced, going from a +7 oxidation state to 0, while Mn is being oxidized, going from a +4 oxidation state to a +7 oxidation state.
To balance the equation, we start by balancing the atoms of each element, starting with the ones that appear in the least number of species:
ReO4^-(aq) + 4MnO2(s) → Re(s) + 4MnO4^-(aq)
Now, we balance the oxygens by adding H2O:
ReO4^-(aq) + 4MnO2(s) → Re(s) + 4MnO4^-(aq) + 2H2O(l)
Now, we balance the hydrogens by adding H+:
ReO4^-(aq) + 4MnO2(s) + 8H+ → Re(s) + 4MnO4^-(aq) + 2H2O(l)
Now, we check that the charges are balanced by adding electrons:
ReO4^-(aq) + 4MnO2(s) + 8H+ → Re(s) + 4MnO4^-(aq) + 2H2O(l) + 8e^-
Finally, we multiply each half-reaction by the appropriate coefficient to balance the electrons:
ReO4^-(aq) + 4MnO2(s) + 8H+ → Re(s) + 4MnO4^-(aq) + 2H2O(l) + 8e^-
7e^- + 8H+ + ReO4^-(aq) → Re(s) + 4H2O(l)
Now we add the two half-reactions together and simplify to get the balanced overall equation:
ReO4^-(aq) + 4MnO2(s) + 8H+ → Re(s) + 4MnO4^-(aq) + 2H2O(l) + 8e^-
7e^- + 8H+ + ReO4^-(aq) → Re(s) + 4H2O(l)
6MnO2(s) + 7ReO4^-(aq) + 24H+ → 7Re(s) + 24H2O(l) + 6MnO4^-(aq)
For more question on balanced equation click on
https://brainly.com/question/30196693
#SPJ11
Acrylonitrile, C3H3N, is the starting material for
the production of a kind of synthetic fiber
acrylics) and can be made from propylene,
C3H6, by reaction with nitric oxide, NO, as
follows:
4 C3H6 (g) + 6 NO (g) → 4 C3H3N (s) + 6 H2O
(1) + N2 (g)
What is the limiting reagent if 168. 36 g of
C3H6 reacts with 180. 06 g of NO?
Acrylonitrile, C3H3N, is the starting material for the production of a kind of synthetic fiber acrylics) and can be made from propylene, the ratio of moles is less than the stoichiometric ratio of 4:6, [tex]C_3H_6[/tex] is the limiting reagent.
To determine the limiting reagent, we need to compare the moles of each reactant and identify which one is present in the smallest amount. The limiting reagent is the one that will be completely consumed in the reaction, thereby determining the maximum amount of product that can be formed.
First, let's calculate the moles of each reactant using their molar masses:
Molar mass of [tex]C_3H_6[/tex] (propylene): [tex]\(3 \times 12.01 + 6 \times 1.01 = 42.08 \, \text{g/mol}\)[/tex]
Moles of [tex]C3H6[/tex] = [tex]\(\frac{{168.36 \, \text{g}}}{{42.08 \, \text{g/mol}}} = 4.00 \, \text{mol}\)[/tex]
Molar mass of NO (nitric oxide): \(14.01 + 16.00 = 30.01 \, \text{g/mol}\)
Moles of NO = [tex]\(\frac{{180.06 \, \text{g}}}{{30.01 \, \text{g/mol}}} = 6.00 \, \text{mol}\)[/tex]
According to the balanced chemical equation, the stoichiometric ratio between [tex]C_3H_6[/tex] and NO is 4:6. This means that for every 4 moles of [tex]C_3H_6[/tex] 6 moles of NO are required.
To determine the limiting reagent, we compare the ratio of moles present. We have 4.00 moles of [tex]C3H6[/tex]and 6.00 moles of NO. The ratio of moles for [tex]C3H6[/tex] :NO is 4:6 or simplified to 2:3.
Since the ratio of moles is less than the stoichiometric ratio of 4:6, [tex]C_3H_6[/tex] is the limiting reagent. This means that 4.00 moles of[tex]C_3H_6[/tex] will completely react with 6.00 moles of NO, producing the maximum amount of product possible.
[tex]\[4 \, \text{C}_3\text{H}_6(g) + 6 \, \text{NO}(g) \rightarrow 4 \, \text{C}_3\text{H}_3\text{N}(s) + 6 \, \text{H}_2\text{O}(l) + \text{N}_2(g)\][/tex]
Learn more about limiting reagent here:
https://brainly.com/question/31171741
#SPJ11
Which of the following monosaccharides is not a carboxylic acid? A) 6-phospho-gluconate. B) gluconate. C) glucose. D) glucuronate. E) muramic acid.
Among the following monosaccharides, the one that is not a carboxylic acid is C) glucose.
Carboxylic acid refers to a group of organic compounds that contain a carboxyl group (-COOH) attached to a carbon atom.
A) 6-phospho-gluconate is a derivative of gluconic acid, which is a carboxylic acid.
B) gluconate is a salt or ester of gluconic acid, which is also a carboxylic acid.
D) glucuronate is a salt or ester of glucuronic acid, a carboxylic acid.
E) muramic acid is a modified sugar containing both a carboxylic acid and an amino group.
C) glucose is an aldohexose sugar, which means it has an aldehyde functional group rather than a carboxylic acid functional group. It is an essential source of energy for cellular metabolism but does not have a carboxylic acid group.
Therefore, glucose is a monosaccharide that is not an acid.
To know more about monosaccharides, refer here:
https://brainly.com/question/780562#
#SPJ11
historically, landfills were the cheap and easy way to deal with solid waste. because of rising land prices and increasing costs of
Historically, landfills were indeed considered a cheap and convenient solution for solid waste disposal. However, due to rising land prices and increasing costs associated with managing and maintaining landfills, their viability as a long-term waste management option has diminished.
As land becomes scarcer and more expensive, the cost of acquiring and operating landfills has significantly increased. Landfill operations require large areas of land, which must be carefully selected and engineered to minimize environmental impacts. Additionally, landfills require ongoing monitoring and maintenance to prevent groundwater contamination and methane gas emissions. These factors contribute to the rising costs of landfill operations. The environmental concerns associated with landfills, such as groundwater pollution and greenhouse gas emissions, have also prompted the search for more sustainable waste management solutions. Governments and organizations worldwide are increasingly focusing on waste reduction, recycling, composting, and waste-to-energy technologies as alternatives to landfills. These approaches aim to minimize waste generation, recover valuable resources, and reduce the environmental footprint of waste management practices.
Learn more about greenhouse gas emissions here:
https://brainly.com/question/31236622
#SPJ11
Use the standard half-cell potentials listed below to calculate the standard cell potential for the following reaction occurring in an electrochemical cell at 25�C. (The equation is balanced.)
Sn(s) + 2 Ag+(aq) ? Sn2+(aq) + 2 Ag(s)
Sn2+(aq) + 2 e- ? Sn(s) E� = -0.14 V
Ag+(aq) + e- ? Ag(s) E� = +0.80 V
Use the standard half-cell potentials listed below to calculate the standard cell potential for the following reaction occurring in an electrochemical cell at 25�C. (The equation is balanced.)
Sn(s) + 2 Ag+(aq) ? Sn2+(aq) + 2 Ag(s)
Sn2+(aq) + 2 e- ? Sn(s) E� = -0.14 V
Ag+(aq) + e- ? Ag(s) E� = +0.80 V
A) -1.08 V
B) +1.74 V
C) -1.74 V
D) +0.94 V
E) +1.08 V
The standard cell potential is calculated using E°cell = E°cathode - E°anode. The correct answer is E) +1.08 V.
To calculate the standard cell potential, you must first determine which half-reaction is the anode (oxidation) and which is the cathode (reduction).
Sn is oxidized to Sn2+, so the Sn half-cell is the anode with a potential of -0.14 V.
Ag+ is reduced to Ag, so the Ag half-cell is the cathode with a potential of +0.80 V.
Use the formula E°cell = E°cathode - E°anode, which is E°cell = (+0.80 V) - (-0.14 V).
This gives you a standard cell potential of +1.08 V, which corresponds to option E.
For more such questions on cell, click on:
https://brainly.com/question/29643320
#SPJ11
The correct answer is not listed, as the standard cell potential is +0.66 V.
The electric potential difference between two electrodes in an electrochemical cell is measured by cell potential, also referred to as cell voltage. It gauges the propensity of electrons to move between electrodes, which powers the chemical reaction in the cell. The higher the cell potential and the more energy is available in the cell, the bigger the difference between the potentials of the electrodes.
The Nernst equation, which considers the temperature, the standard electrode potential, the concentrations of the reactants and products in the cell, can be used to compute the cell potential.
To calculate the standard cell potential, we need to use the formula:
Standard cell potential = E°(reduction) + E°(oxidation)
First, we need to determine which half-reaction will be reduced and which will be oxidized. Since Ag+ has a higher half-cell potential than Sn2+, Ag+ will be reduced and Sn will be oxidized.
Ag+(aq) + e- ? Ag(s) E� = +0.80 V (reduction)
Sn(s) ? Sn2+(aq) + 2 e- E� = -0.14 V (oxidation)
Now we can plug in the values into the formula:
Standard cell potential = +0.80 V + (-0.14 V)
Standard cell potential = +0.66 V
Therefore, the correct answer is not listed, as the standard cell potential is +0.66 V.
Learn more about cell potential here:
https://brainly.com/question/1313684
#SPJ11
Air at 27 °C, 1 atm and a volumetric flow rate of 40 m^3/min enters an insulated control volume operating at steady state and mixes with helium entering as a separate stream at 120 °C, 1 atm and a volumetric flow rate of 25 m^3/min. The mixture exits at 1 atm. Assuem ideal gas behavior, steady-state processes, with ¯M = 28.97, cpair = 1.008 kJ/kg⋅ K, and ¯MHe= 4.003, cpHe = 5.96 kJ/kg⋅K.
The process is adiabatic since the control volume is insulated, so there is no heat transfer and the temperature change is due to the mixing of the two streams.
When air at 27°C and 1 atm is mixed with helium at 120°C and 1 atm, at a volumetric flow rate of 40 m^3/min and 25 m^3/min respectively, the mixture exits at 1 atm. Assuming ideal gas behavior, steady-state processes, with molar mass and specific heat capacity given, the final temperature of the mixture can be calculated as 49.4K
The problem can be solved using the conservation of mass and energy equations. Since the control volume is insulated, there is no heat transfer. Therefore, the energy equation reduces to the conservation of enthalpy. The mass flow rates of air and helium and their specific heat capacities are given, and the molar mass of the mixture can be calculated from the mole fractions of air and helium. The mole fractions can be calculated using the volumetric flow rates and the molar volumes of air and helium at their respective conditions.
Using the conservation of mass equation, the mole fractions of air and helium in the mixture are found to be 0.783 and 0.217, respectively. Using the conservation of enthalpy equation, the final temperature of the mixture can be calculated as 49.4°C.
Learn more about adiabatic:https://brainly.com/question/28302589
#SPJ11
once balanced, the oxidation half reaction of br-1 bro3-1 that occurs in base will require how many h2o molecules?
The balanced oxidation half-reaction of Br⁻¹ to BrO₃⁻¹ that occurs in a basic solution requires 6 H₂O molecules.
what is oxidation?
Oxidation is a chemical process that involves the loss of electrons or an increase in the oxidation state of an element, ion, or molecule. It is one half of a redox (reduction-oxidation) reaction, where oxidation and reduction occur simultaneously.
In oxidation, a species loses electrons, and its oxidation state becomes more positive. The species that undergoes oxidation is called the reducing agent because it donates electrons to another species.
Oxidation reactions are often associated with the addition of oxygen to a substance or the removal of hydrogen from it, although they can also occur without the involvement of oxygen.
To balance the oxidation half-reaction of Br⁻¹ to BrO₃⁻¹ in a basic solution, the number of atoms on both sides of the reaction equation needs to be equal. Initially, the oxidation state of bromine (Br) is -1 in Br⁻¹ and +5 in BrO₃⁻¹.
The balanced equation for the oxidation half-reaction in a basic solution is as follows:
Br⁻¹ (aq) → BrO₃⁻¹ (aq)
To balance the equation, we need to add water molecules (H₂O) to balance the oxygen atoms. In this case, 6 H2O molecules are required on the product side (right side) to balance the oxygen atoms. This ensures that the number of oxygen atoms is the same on both sides of the equation.
The balanced oxidation half-reaction is:
Br⁻¹ (aq) → BrO₃⁻¹ (aq) + 6 H₂O (l)
Therefore, in this balanced oxidation half-reaction, 6 H₂O molecules are required.
To know more about oxidation, refer here:
https://brainly.com/question/13255572#
#SPJ4
Complete question:
Once balanced, the oxidation half reaction of br⁻¹ brO₃⁻¹ that occurs in base will require how many H₂O molecules?
Name the two ways that remove the most carbon dioxide from the atmosphere. Carbon dioxide combines with water to form a single product. Name that product (label it as product #1). That product also reacts with water to produce hydronium ion and _ Name the other product of the second reaction (label it as product #2). BRIEFLY: How do these two reactions affect ocean pH? BRIEFLY: how does ocean pH affect ocean-dwelling organisms?
The two ways that remove the most carbon dioxide from the atmosphere are:
Photosynthesis by plants, algae, and other photosynthetic organisms
Chemical weathering of rocks and minerals, which involves the reaction of carbon dioxide with minerals such as silicates to form bicarbonate ions
The product formed when carbon dioxide combines with water is called carbonic acid (H2CO3), which can dissociate into a hydrogen ion (H+) and a bicarbonate ion (HCO3-). Therefore, carbonic acid can be considered product #1 in this context.
When carbonic acid reacts with water, it dissociates into a hydronium ion (H3O+) and a bicarbonate ion (HCO3-). Therefore, the other product of this reaction (product #2) is a bicarbonate ion (HCO3-).
These reactions affect ocean pH by increasing the concentration of hydrogen ions in the water, which leads to a decrease in pH. This process is known as ocean acidification, and it can have negative effects on marine organisms that rely on certain pH levels for survival, such as shellfish and coral reefs.
When the pH of the ocean decreases, it becomes more acidic, which can make it more difficult for marine organisms to build and maintain their shells and skeletons. This can lead to a decline in populations of shellfish, coral reefs, and other organisms that rely on carbonate minerals to survive. Additionally, ocean acidification can also have indirect effects on food webs and ecosystems that rely on these organisms for food and habitat.
The two ways that remove the most carbon dioxide from the atmosphere are photosynthesis and ocean absorption.
In the first reaction, carbon dioxide combines with water to form carbonic acid (H2CO3), which we can label as product #1. Carbonic acid then reacts with water to produce hydronium ion (H3O+) and bicarbonate ion (HCO3-), with the latter being product #2.
These two reactions affect ocean pH by increasing the concentration of hydronium ions, making the ocean more acidic. The decrease in ocean pH, also known as ocean acidification, can negatively impact ocean-dwelling organisms. For example, it can hinder the ability of shell-building organisms, like corals and mollusks, to form their calcium carbonate shells and skeletons, ultimately affecting the overall health and biodiversity of marine ecosystems.
To know more about carbon dioxide : https://brainly.com/question/21851295
#SPJ11
The preparations of two aqueous solutions are described in the table below. For each solution, write the chemical formulas of the major species present at equilibrium.
You can leave out water itself. Write the chemical formulas of the species that will act as acids in the 'acids' row, the formulas of the species that will act as bases in the 'bases' row, and the formulas of the species that will act as neither acids nor bases in the 'other' row.
You will find it useful to keep in mind that NH3 is a weak base.
To answer this question, we need to identify the major species present in each aqueous solution and categorize them as acids, bases, or neither. It is also important to keep in mind the concept of equilibrium, where the forward and backward reactions occur at the same rate.
Starting with Solution A, which is prepared by dissolving HCl in water. HCl is a strong acid and will fully dissociate in water to form H+ and Cl- ions. Therefore, the major species present at equilibrium in Solution A are H+ and Cl-. These are both acids, as they can donate a proton to a base.
Moving on to Solution B, which is prepared by dissolving NH3 in water. NH3 is a weak base and will only partially dissociate in water to form NH4+ and OH- ions. Therefore, the major species present at equilibrium in Solution B are NH3, NH4+, and OH-. NH3 and NH4+ are both bases, as they can accept a proton from an acid. OH- is also a base, as it can donate a lone pair of electrons to form a bond with a proton.
In terms of the 'other' category, we can include water molecules and any ions or molecules that do not have acidic or basic properties. In Solution A, the 'other' species would be water and any ions that may have been present in the initial HCl sample. In Solution B, the 'other' species would be water and any ions that may have been present in the initial NH3 sample.
In summary, the chemical formulas of the major species present at equilibrium in Solution A are H+ and Cl-, both of which are acids. The chemical formulas of the major species present at equilibrium in Solution B are NH3, NH4+, and OH-, all of which are bases.
To know more about bases visit:
https://brainly.com/question/27089588
#SPJ11
use the given reccurrence relation to find the indicated constant (k 2)(k 1)ak 2 - (k-1)ak 1 (k^2 - k 1)ak=0
The indicated constant is 2(k-1)(k+1)/[(k^2 - k + 1)^2].
The given recurrence relation is:
(k^2 - k + 1) a_k = (k^2 - k + 2) a_{k-1}
To use this recurrence relation to find the indicated constant, we can first write out the first few terms of the sequence:
a_1 = c (some constant)
a_2 = (3/2) c
a_3 = (8/5) c
a_4 = (15/7) c
a_5 = (24/11) c
...
We notice that each term can be written in the form:
a_k = [p(k)/q(k)] c
where p(k) and q(k) are polynomials in k. To find these polynomials, we can use the recurrence relation and simplify:
(k^2 - k + 1) a_k = (k^2 - k + 2) a_{k-1}
(k^2 - k + 1) [p(k)/q(k)] c = (k^2 - k + 2) [p(k-1)/q(k-1)] c
[p(k)/q(k)] = [(k^2 - k + 2)/ (k^2 - k + 1)] [p(k-1)/q(k-1)]
Therefore, we have the recursive formula:
p(k) = (k^2 - k + 2) p(k-1)
q(k) = (k^2 - k + 1) q(k-1)
Using this recursive formula, we can easily compute p(k) and q(k) for any value of k. For example, we have:
p(2) = 3, q(2) = 2
p(3) = 20, q(3) = 15
p(4) = 315, q(4) = 280
Now, we can use the first two terms of the sequence to find the constant c:
a_1 = c = k/(k^2 - k + 1) * a_0
a_2 = (3/2) c = (k^2 - k + 2)/(k^2 - k + 1) * a_1
Solving for c gives:
c = 2(k-1)/(k^2 - k + 1) * a_0
Finally, we substitute this expression for c into the formula for a_k and simplify:
a_k = [p(k)/q(k)] c
= [(k^2 - k + 2)/ (k^2 - k + 1)] [p(k-1)/q(k-1)] * [2(k-1)/(k^2 - k + 1)] * a_0
= 2(k-1)(k+1)/[(k^2 - k + 1)^2] * a_0
Therefore, the indicated constant is 2(k-1)(k+1)/[(k^2 - k + 1)^2].
Click the below link, to learn more about Recurrence relation:
https://brainly.com/question/31446203
#SPJ11
an aminoacyl trna is mutated so that it now attaches the amino acid glycine to the trna valine instead of valine. what will happen at translation
The mutation in the aminoacyl tRNA that causes glycine to be attached to tRNA-valine instead of valine can disrupt translation, affect protein structure and function, and potentially cause negative cellular consequences. Translation wll be adversely affected.
When an aminoacyl tRNA is mutated and attaches the amino acid glycine to tRNA-valine instead of valine, it will disrupt the translation process. Translation is the synthesis of proteins based on the genetic code carried by mRNA. It relies on the accurate pairing of tRNA molecules carrying specific amino acids with the corresponding codons on the mRNA.
In this case, the mutation causes the wrong amino acid to be incorporated into the growing polypeptide chain whenever the mRNA codon for valine is encountered. Since glycine and valine have different properties, this will affect the protein's structure and function. Glycine is the smallest amino acid and provides flexibility to the protein structure, while valine is a larger, hydrophobic amino acid that contributes to the protein's stability.
As a result, the translated protein may not fold correctly, leading to a loss of function or reduced activity. This can cause various downstream effects depending on the role of the protein in the cell. If the protein is essential for cellular function, the mutation could lead to cell death or the development of diseases.
Additionally, the mutated tRNA might also decrease translation efficiency, as the ribosome may stall or prematurely terminate translation upon encountering the incorrect amino acid.
Know more about mutation here:
https://brainly.com/question/17130462
#SPJ11
A student is studying a sample of neon in a container with a moveable piston (this means the container can change in size). If the sample in the container is initially at a pressure of 757.2 torr when the container has a volume of 81.4 mL, what is the pressure of the gas when the piston is moved so that the volume of the container becomes 132.5 mL? Round your answer to the nearest 0.01 and include units!
The pressure of the gas in the container when the volume is 132.5 mL is 465.54 torr (rounded to the nearest 0.01) with units of torr.
To solve this question, we can use the ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature. Since the sample of neon is at a constant temperature and the number of moles of gas is constant, we can use the equation P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
Using the given values, we can write:
P1V1 = P2V2
(757.2 torr) x (81.4 mL) = P2 x (132.5 mL)
Solving for P2, we get:
P2 = (757.2 torr x 81.4 mL) / 132.5 mL
P2 = 465.54 torr
For more such questions on pressure
https://brainly.com/question/17426370
#SPJ11