Use Table B in your Student Guide to answer the questions about ion concentrations.



A solution with a pH = 13 has approximately how many moles of OH– ions per liter?
0.1



How many moles of H+ would this same solution have per liter?
0.000000000000.1
⇒ 0.0000000000001

(Use the decimal form of your answer.)



A different solution with an H+ concentration of 1.0 × 10–4 would have a pH =
4
.

Tempering Valve should be installed to cool the water.

A tempering valve is also called an anti-scald valve.

The thermostat controls the temperature inside the tank between 120F to 140F.

A thermostat is just a switch that is actuated by temperature. The thermostat will activates one of the elements in response to a "request for heat" when it detects a water temperature below its predetermined point.

At 140 degrees F temperature water can cause a burn to the skin in five seconds.

The Tempering valve is the mixing chamber, where cold water is mixed with hot water.  

It functions as a mixing device, mixing hot and cold water to generate the proper water temperature that is emitted from a certain outlet.

For a detailed study about the thermostat refer given link https://brainly.com/question/8312329.

#SPJ1.

Answer:  Carboxylation of hydroquinone

Acetate and hydrogen gas (H2) is never abundant in aerobic soils and sediments because they are tiny, highly reduced molecules that many bacteria that breathe oxygen and nitrates quickly absorb to use as fuel for energy generation. 

Hydrogen is a substrate for methanogenic archaea and, along with acetate, one of the most significant intermediates in the methanogenic breakdown of organic materials. Numerous methanogenic environments exhibit contributions of H₂ to CH₄ production that are both significantly lower and significantly higher than is considered usual. H₂ is rapidly converted in methanogenic settings due to the simultaneous generation by fermenting and syntrophic bacteria and consumption by methanogenic archaea.

Learn more about archaea here:

https://brainly.com/question/3654264

#SPJ4

[tex] \sf \blue{B. H_{2}SO4 \: and \: SO_{2}}[/tex]

As we know in oxidation, oxygen is added and hydrogen is reduced. And in option B, we can observe that is oxygen added +6. So, we conclude that option B is valid.

Cesium Sulfite is formed from the Cs cation and the SO₃⁻² anion. The correct formula for this compound is Cs₂SO₃.

Cations are positively charged ions. It forms when an element lose one or more electrons.

Anions are negatively charged ions. It form when an element gains one or more electrons.

Symbol         Cs⁺¹         SO₃⁻²

Valency           +1              -2

Formula of the compound is Cs₂SO₃.

Thus from the above conclusion we can say that Cesium Sulfite is formed from the Cs cation and the SO₃⁻² anion. The correct formula for this compound is Cs₂SO₃.

Learn more about the Cation and Anions here: https://brainly.com/question/20005547
#SPJ1

When the hydrogen chloride concentration doubles, the number of collisions between the reactants becomes increased, which causes the rate of the forward reaction to be faster.

The rate of a reaction is how fast a chemical reaction occurs i.e. the conversion of reactants to products.

The rate of a chemical reaction can be influenced by certain factors including the concentration of reactants.

The more the concentration of a reactant, the more the collision between the reactants and hence, the faster the reaction will proceed.

Therefore, when the hydrogen chloride concentration doubles, the number of collisions between the reactants becomes increased, which causes the rate of the forward reaction to be faster

Learn more about rate of reaction at: https://brainly.com/question/8592296

#SPJ1

Answer:1. increases 2. increases

Explanation:

Got it right on plato!

A first-order reaction is 81omplete in 264s.The half-life for this reaction (i) t 1/2 = =3.465×10 −3 s.to reach 95% Completion = 285 s.

To measure reaction rates, chemists initiate the reaction, measure the concentration of the reactant or product at different times as the reaction progresses,

For a 0-order response, the mathematical expression that may be employed to determine the half of life is: t1/2 = [R]0/2k. For a first-order reaction, the half of-existence is given by: t1/2 = zero.693/ok. For a 2d-order response, the method for the half-life of the response is: 1/okay[R]0

The 1/2-life of a response (t1/2), is the quantity of time needed for a reactant concentration to lower via half of compared to its initial awareness. Its software is used in chemistry and medicine to are expecting the awareness of a substance over time

Half of the lifestyles is the time required for exactly 1/2 of the entities to decay   50%.

Learn more about first-order reaction here:- https://brainly.com/question/518682

#SPJ4

the strength of the solution formed is 3.8.

The amount of solute dissolved in grammes per litre of the solution is used to determine the solution's strength. It stands for the solution's potency or concentration. It uses grammes per litre of expression.

Concentration of NaOH = 19 M

Initial volume of NaOH = 25 mL= 0.025 L

Moles of NaOH = 19*0.025

                        = 0.475 moles

Final volume of NaOH solution = 5 L

Final concentration = 0.475/5

                              = 0.095 M

so, the strength is 19/5

                            = 3.8

to know more about strength of the solution go to - https://brainly.com/question/15848974

#SPJ4

The equilibrium molarity HPO²₄- = 6.2 x 10⁻⁸M See the explanation below.

The molar concentration of a certain species in a solution is known as equilibrium molarity.

The initial concentration H₃PO₄ = 0.31 M

Kₐ₁ = 6.92 x 10⁻³ (See Image 1 attached)

Kₐ₁ = [H⁺][tex]_{eq}[/tex][H₂PO₄-][tex]_{eq}[/tex] / [H₃PO₄][tex]_{eq}[/tex]

6.92⁻³ x 10 = [(x) * (x)] / (0.31 M - x)

Solving for x, x = 0.043 M

[H+] = x = 0.043 M

[H₂PO₄-] = x = 0.043 M 0.0429805

Kₐ₂ = 6.2 x 10⁻⁸

See the second attached table

Kₐ₂ = [H+][tex]_{eq}[/tex] [HPO₄²-]eq / [H₂PO₄-]eq

6.2 x 10⁻⁸ = [(0.043 M + x) * (x)] / (0.043 M - x)

Solving for x, x = 6.2 x 10⁻⁸ M

[H₂PO₄-]eq = x = 6.2 x 10⁻⁸ M

Learn more about equilibrium molarity at;
https://brainly.com/question/14469428
#SPJ1

The number of moles of CO₂ that is produced when burning 6.0 mol of ethanol is 12 mol.

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

Now we have to write the balanced equation

C₂H₅OH + 3O₂ → 2CO₂ + 3H₂O

We can see that every 1 mole of ethanol we will get 2 mole of CO₂.

So 6.0 mol of ethanol we will get = 6.0 × 2.0

                                                       = 12 mol of CO₂

Thus from the above conclusion we can say that The number of moles of CO₂ that is produced when burning 6.0 mol of ethanol is 12 mol.

Learn more about the Balanced Chemical Equation here: https://brainly.com/question/26694427

#SPJ1

To determine how stable the beads are as well ensue the securing of maximum enzymes as well as the retention of their activity.

The concentration of a substance simply means the amount of the substance in solution. Thus we are looking at the amounts of sodium alginate and CaCl2 in the system.

The concentrations of the sodium alginate and CaCl2 is varied in order to determine how stable the beads are as well ensue the securing of maximum enzymes as well as the retention of their activity.

Learn more about enzymes:https://brainly.com/question/14953274

#SPJ1

B. The chemical reaction that represents oxidation - reduction reaction is CaCO3(s) → CaO(s) + CO2(g).

In oxidation reduction reaction, the oxidizing agent is reduced while reducing agent is oxidized.

CaCO3(s) → CaO(s) + CO2(g)

Calcium (ca) is oxidized calcium (II) ion while the carbon (IV) oxide is reduced carbon (IV) oxide.

Thus, the chemical reaction that represents oxidation - reduction reaction is CaCO3(s) → CaO(s) + CO2(g).

Learn more about oxidation reduction reaction here: https://brainly.com/question/4222605

#SPJ1

Answer: The answer is B

Explanation: on edge

The halogen or halogen-containing compound is typically used as a form of topical antisepsis will be "iodophor".

Iodine will be employed as an antiseptic in the manner of a tincture of iodine, essentially an alcoholic solution.

Iodophor would be an iodine-containing solution that also contains a solubilizing agent, like povidone or a surfactant. Iodophor would be a common sanitizer in the dairy but also brewing sectors. Generally, a high molecular weight carrier, commonly a polymer, has been polymerized with iodine.

Therefore, the halogen or halogen-containing compound is typically used as a form of topical antisepsis will be "iodophor".

To know more about antisepsis

https://brainly.com/question/15186144

#SPJ4

Considering the definition of percentage by mass, the concentration of a solution if 15 g of salt is added to 170 g of water is 8.108 %.

The percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.

In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]

In this case, you know:

Replacing in the definition of percentage by mass:

[tex]percentage by mass=\frac{15 grams}{185 grams}x100[/tex]

Solving:

percent by mass= 8.108 %

Finally, the concentration of a solution if 15 g of salt is added to 170 g of water is 8.108 %.

Learn more about percentage by mass:

brainly.com/question/19168984

brainly.com/question/18646836

#SPJ1

The classification of the alcohols gives;

Organic compounds occurs in families. The family of compounds is called a homologous series. The homologous series always have a functional group. The functional group is the atom, group of atoms or bond that is responsible for the chemical reactivity of the members of a given homologous series.

Now we know that the alcohols are those organic compounds that contains the -OH group. The could be aliphatic or alicyclic compounds. We shall now proceed to name the kind of alcohols that each of the compounds shown are;

Learn ore about alcohols:https://brainly.com/question/4698220

#SPJ1

The process which is best described by "A" in this Venn diagram is: C. fusion of atoms.

Nuclear fusion can be defined as a type of nuclear reaction that involves joining or combining two (2) smaller nuclei of atoms, so as to form a single heavier nucleus accompanied with the release of energy.

Based on the Venn diagram in the image attached below, we can logically deduce that the process which is best described by "A" is fusion of atoms.

Read more on nuclear fusion here: https://brainly.com/question/9903602

#SPJ1

Chemical changes are changes that alter the identity or the chemical composition of substances at the atomic level.

When a substance changes chemically, the identity of the substance changes.

In other words, chemical changes are changes that occur to substances such that the entire chemical properties of the substances change.

These changes happen at the atomic levels of substances. Sometimes, the changes can also be physical as well.

More on chemical changes can be found here: https://brainly.com/question/23693316

#SPJ1

The volume of 30% concentrated lime juice that must be added to a 4L solution of 80% concentrated lime juice and 20% water is 6 L.

Mixtures are substances which are formed when two or more substances are physically combined together.

Mixtures are heterogenous in nature and the constituents can be easily separated.

The volume of 30% concentrated lime juice that must be added to a 4L solution of 80% concentrated lime juice and 20% water, so that the concentration of the resulting solution is 50% concentrated lime juice is determined as follows:

Let the volume of 30% lime juice required be x;

total volume of lime juice = 0.3x

For 80% lime juice, volume of lime juice = 0.8 * 4 = 3.2 L

New volume of lime juice = 4 + x

New amount of lime juice added = 3.2 + 0.3x

Also, new amount of lime juice = 0.5 * ( 4 + x)

3.2 + 0.3x = 0.5 * ( 4 + x)

0.2x = 1.2

x = 6 L

In conclusion, the volume to be added is obtained from the percent concentration.

Learn more about percent concentration at: https://brainly.com/question/19379932

#SPJ1

The enthalpy of fusion for Al is 10.7 kJ/mol. -12.2 kJ is the energy change when 30.8 g of Al solidifies at 660°C.

The amount of energy needed to change 1 mole of substance under state change at constant temperature and pressure is called enthalpy of fusion. It is also known as Latent heat of fusion. Unit of enthalpy of fusion is kJ/mol.

To find the change in energy use this expression:

q = n ΔH

where

q = Energy change

n = number of moles

ΔH = Molar enthalpy

Number of moles (n) = [tex]\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

                                  = [tex]\frac{30.8\ g}{26.98\ \text{g/mol}}[/tex]

                                  = 1.141 mol

Now put the values in above formula we get

q = - n ΔH                    [Negative sign is used because Al solidifies here]

  =  - (1.141 mol × 10.7 kJ/mol)

  = -12.2 kJ

Thus from the above conclusion we can say that The enthalpy of fusion for Al is 10.7 kJ/mol. -12.2 kJ is the energy change when 30.8 g of Al solidifies at 660°C.

Learn more about the Latent heat of fusion here: https://brainly.com/question/87248

#SPJ1

[tex]\\ \rm\dashrightarrow \Delta T_f=ik_fm[/tex]

Moles of NaCl

Molality

[tex]\\ \rm\dashrightarrow \Delta T_f=i(-1.86)(8.68)[/tex]

[tex]\\ \rm\dashrightarrow \Delta T_f=-16.14i[/tex]

i is vant Hoff factor

For NaCl vant Hoff factor is 2( Actually 1.9)

[tex]\\ \rm\dashrightarrow \Delta T_f=-16.14(2)=-32.28°C[/tex]

Moles of NaCl

[tex]\\ \tt{:}\dashrightarrow \dfrac{1000g}{23g/mol}[/tex]

[tex]\\ \tt{:}\dashrightarrow 43.4mol[/tex]

Find Molality

[tex]\boxed{\sf Molality=\dfrac{Moles\:of\:solute}{Volume \:of\: solution\:in\:kg}}[/tex]

[tex]\\ \tt{:}\dashrightarrow m=\dfrac{43.4}{6}=7.2m[/tex]

Vant Hoff factor

[tex]\\ \tt{:}\dashrightarrow NaCl\longrightarrow Na^++Cl^-[/tex]

Freezing point depression

[tex]\\ \tt{:}\dashrightarrow \Delta T_f=iK_fm[/tex]

[tex]\\ \tt{:}\dashrightarrow \Delta T_f=2(-1.86)(7.2)[/tex]

[tex]\\ \tt{:}\dashrightarrow \Delta T_f=-26.7°C[/tex]

Entropy directs to the degree of disorderliness in a system. Generally, solids have a greater degree of order when corresponded to gas in which the molecules/particles move randomly in all directions.

The transformation in entropy from solid to gaseous phase is a positive change. Because there is increase disorderliness of the system.

A campfire is an illustration of entropy. The solid wood burns and becomes ash, smoke and gases, all of which applied energy outwards more efficiently than the solid fuel. Ice melting, salt or sugar dissolving, constructing popcorn and boiling water for tea are processed with growing entropy in your kitchen.

To learn more about Entropy, refer

https://brainly.com/question/6364271

#SPJ9

Answer:

73.68 J

Explanation:

To find the energy absorbed by nickel, you need to use the following equation:

Q = mcΔT

In this equation,

-----> Q = energy (J)

-----> m = mass (g)

-----> c = specific heat (J/g°C)

-----> ΔT = change in temperature

The change in temperature is found by subtracting the initial temperature from the final temperature. You can plug the given values into the equation and simplify to find the energy absorbed.

m = 10.0 g

c = 0.120 J/g°C

ΔT = 63.4 °C - 2.0 °C = 61.4 °C

Q = mcΔT

Q = (10.0 g)(0.120 J/g°C)(61.4 °C)

Q = 73.68  J

Answer:

What was Niels Bohr's most important discovery? Niels Bohr proposed a model of the atom in which the electron was able to occupy only certain orbits around the nucleus. This atomic model was the first to use quantum theory, in that the electrons were limited to specific orbits around the nucleus.

Explanation:

Subjects Of Study: atomic model

Answer:

1.48 x 10²⁵ molecules ZnO

Explanation:

To find the amount of molecules, you need to (1) convert grams to moles (via molar mass) and then (2) convert moles to molecules (via Avogadro's Number). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units.

Molar Mass (ZnO): 65.380 g/mol + 15.998 g/mol

Molar Mass (ZnO): 81.378 g/mol

Avogadro's Number:

6.022 x 10²³ molecules = 1 mole

2,000 g ZnO           1 mole              6.022 x 10²³ molecules
---------------------  x  -----------------  x  ---------------------------------------  =  
                                81.378 g                          1 mole

=  1.48 x 10²⁵ molecules ZnO

Answer:

four 0.5 times 10 to the 23rd Adams of Neptune

Explanation:

Answer:

0.75 ( 6.02 × 10²³) = 4.515 x 10²³

Explanation:

0.75 ( 6.02 × 10²³) = 4.515 x 10²³

Answer:

Explanation:

b

Chemical change: A chemical reaction is the change of one chemical substance into another chemical substance. For instance: The rusting of iron, the curdling of milk, the digestion of food, breathing, etc.

What is a chemical reaction?

A chemical reaction is the change of one chemical substance into another chemical substance.

To learn more about chemical reactions, refer to:

https://brainly.com/question/1222323

#SPJ9

Chemical  change is the change  chemical substance is transformed into another chemical substance.It is irreversible in  nature , for example Reaction of medicine in body , milk to curd etc.

1)Physical change temporary or reversible in nature but chemical change is irreversible in nature

2)In physical change there no new product is formed but in chemical change there formation of new product takes .

3) Physical change is change sin shape ,size or state for example freezing of water , melting of wax , and example of  Chemical change are Burning of  coal, digestion of food

to learn more about chemical change click here https://brainly.com/question/28089135

#SPJ9

Answer:

C - can be solids, liquids, or gases

Explanation:

the pressure in the balloon decreases- True

the pressure in the balloon increases- False

the volume of the balloon increases- True

the volume of the balloon decreases- False

To learn more about weather balloon visit:

https://brainly.com/question/13079902

#SPJ4

The mass of benzoic acid is 0.244 g.

Here use the concept of molarity.

The amount of a substance in a specific volume of solution is known as its molarity (M). The moles of a solute per liter of a solution is known as molarity.

                            Molarity = no. of moles/volume (in L)

Given,

Molarity, M = 0.100 M

Volume, V = 20.00 mL = 20.0 × 10⁻³

To calculate,

Mass of benzoic acid C₇H₆O₂ =?

We know that,

Molecular mass of benzoic acid, C₇H₆O₂  = 122

No. of moles = weight/ molecular mass

The formula is modified as,

Molarity = weight of cholesterol/ (molecular mass) (Volume)

Put the values in the formula,

0.100 = Mass of benzoic acid/ (122) (20 × 10⁻³)

Mass of benzoic acid = 0.100 (122)(20 × 10⁻³)

                                    = 244 × 10⁻³

                                    = 0.244 g

Hence, the mass of benzoic acid is 0.244 g.

Learn more about molarity here:

brainly.com/question/13386686

#SPJ4