Two protons are a distance 7 10-9 m apart. What is the electric potential energy of the system consisting of the two protons

The stored energy can be represented as 0.0981m Joules, where m is the mass of the person in kilograms. Given that the stretch during a stride lowers the center of mass by 10 mm, we can calculate the stored energy using the following steps:

1. First, we need to convert the 10 mm to meters for consistency in units. To do this, divide 10 by 1000: 10 mm = 0.01 m.

2. Next, we need to determine the force acting on the center of mass due to gravity. This force is the product of the mass (m) and the acceleration due to gravity (g). The formula for this is F = m × g, where g is approximately 9.81 m/s². We don't have the mass, so we'll keep the formula as F = m × 9.81.

3. Now, we can calculate the potential energy stored in the system as the center of mass lowers. Potential energy (PE) is the product of force (F), displacement (d), and the cosine of the angle (θ) between them. In this case, the angle is 0° since the force and displacement are in the same direction, and the cosine of 0° is 1. So, PE = F × d × cos(θ) = (m × 9.81) × 0.01 × 1.

4. Simplify the equation: PE = 0.0981m (Joules).

Since we don't have the mass (m) of the person in question, the stored energy can be represented as 0.0981m Joules, where m is the mass of the person in kilograms.

Learn more about center of mass here:

https://brainly.com/question/28996108

#SPJ11

Therefore, the kinetic energy of the goose is approximately 928.2 joules.

To calculate the kinetic energy of the goose, we need to convert its mass from pounds to kilograms, and its velocity from miles per hour to meters per second.

1 pound = 0.453592 kg

1 mile/hour = 0.44704 meters/second

Using these conversion factors, we can find the mass and velocity of the goose in SI units:

mass = 20.3 lb x 0.453592 kg/lb = 9.20513 kg

velocity = 10.1 miles/hour x 0.44704 meters/second = 4.51444 m/s

The kinetic energy of the goose is given by the formula:

KE =[tex](1/2)mv^2[/tex]

here KE ia all about the kinetic energy, and m is the mass, here v is the velocity.

Put all the values so that we have found, and we get:

KE = (1/2)(9.20513 kg)[tex](4.51444 m/s)^{2}[/tex] = 928.2 joules

Therefore, the kinetic energy of the goose is approximately 928.2 joules.

Learn more about kinetic energy visit: brainly.com/question/8101588

#SPJ4

The magnitude of the impulse due to the collision is approximately 126170 Ns.

The impulse-momentum theorem states that the impulse on an object is equal to the change in its momentum. We can use this theorem to find the magnitude of the impulse due to the collision:

Impulse = Δp

where Δp is the change in momentum of the automobile.

The change in momentum of the automobile can be calculated as:

Δp = p_f - p_i

where p_i is the initial momentum of the automobile and p_f is its final momentum.

The initial momentum of the automobile can be calculated as:

p_i = m v_i

where m is the mass of the automobile and v_i is its initial velocity in the x-direction.

Substituting the given values, we get:

p_i = (1221 kg) x (18 m/s) = 21978 kg m/s

The final momentum of the automobile can be calculated as:

p_f = m v_f

where v_f is the final velocity of the automobile in the x-direction.

Substituting the given values, we get:

p_f = (1221 kg) x (2.5 m/s) = 3052.5 kg m/s

Therefore, the change in momentum of the automobile is:

Δp = p_f - p_i = 3052.5 kg m/s - 21978 kg m/s = -18925.5 kg m/s

The negative sign indicates that the direction of the impulse is opposite to the initial direction of the momentum.

The duration of the collision is given as 0.15 s. The impulse can be calculated as:

Impulse = Δp / t

where t is the duration of the collision.

Substituting the given values, we get:

Impulse = (-18925.5 kg m/s) / (0.15 s) = -126170 Ns

Know more about impulse here:

https://brainly.com/question/30466819

#SPJ11

The pressure exerted by the reflected wave is [tex]1.25 * 10^-^9 Pa[/tex].

To calculate the pressure exerted by the reflected wave, we can use the formula P = (2I)/c, where P is pressure, I is the intensity of the wave, and c is the speed of light.

The intensity can be found using the equation I = (1/2)ε_0c[tex]E^2[/tex], where ε_0 is the electric constant, c is the speed of light, and E is the electric field amplitude.

Since the wave is linearly polarized, we know that the electric field amplitude is equal to the magnetic field amplitude, so E = Bc.

Plugging in the values given in the question, we find that I = [tex]6.25 * 10^-^1^5 W/m^2[/tex], and therefore P = [tex]1.25 * 10^-^9[/tex] Pa.

For more such questions on pressure, click on:

https://brainly.com/question/28012687

#SPJ11

To solve this problem, we need to first find the angular acceleration and then the final angular velocity of the flywheel. After that, we can determine the time it takes to complete the remaining 5 revolutions at constant angular velocity.

1. Determine the angular acceleration:
Since the flywheel makes one complete revolution during the 2 seconds of angular acceleration, it rotates through an angle of 2π radians (1 revolution = 2π radians). Using the equation θ = ω₀t + (1/2)αt², where θ is the angle in radians, ω₀ is the initial angular velocity (0 since it starts from rest), α is the angular acceleration, and t is the time (2 seconds), we can solve for α: 2π = 0(2) + (1/2)α(2)²
α = 2π/2² = π rad/s²
2. Determine the final angular velocity:
Using the equation ω = ω₀ + αt, we can find the final angular velocity ω:
ω = 0 + π(2) = 2π rad/s
3. Calculate the time to complete the remaining 5 revolutions:
Now that the flywheel has a constant angular velocity of 2π rad/s, we can calculate the time it takes to complete the remaining 5 revolutions. To do this, we need to find the angle θ for 5 revolutions (5 * 2π = 10π radians) and use the equation θ = ωt: 10π = (2π)t
t = 5 seconds
4. Determine the total time for 6 revolutions:
Finally, we add the initial 2 seconds of acceleration to the 5 seconds it takes to complete the remaining revolutions:
Total time = 2 + 5 = 7 seconds
So, it takes the flywheel 7 seconds to make a total of 6 full revolutions.

For more information on angular acceleration see:

https://brainly.com/question/29428475

#SPJ11

Therefore, a force of 196.2 N must be exerted to push the 100 kg ball up the 50 m ramp to a height of 10 m.

To determine the force needed to push the ball up the ramp, we need to consider the work-energy principle. The work done by the force pushing the ball up the ramp must be equal to the change in the ball's potential energy.

The potential energy gained by the ball is given by:

ΔPE = mgh

here m is the mass of the ball, g is the acceleration due to gravity, and h is the height gained by the ball.

ΔPE = (100 kg)(9.81 m/s^2)(10 m - 0 m) = 9810 J

The work done by the force pushing the ball up the ramp is given by:

W = Fd

here F is the force exerted on the ball, and d is the distance over which the force is applied (in this case, the length of the ramp, 50 m).

The force required to push the ball up the ramp is then:

F = W/d = ΔPE/d = (9810 J)/(50 m) = 196.2 N

Learn more about force Visit: brainly.com/question/25239010

#SPJ4

A force of 196.2 N must be exerted to push the 100 kg ball up the 50 m ramp to a height of 10 m.

To calculate the force needed to push a 100 kg ball up a 50 m ramp to a height of 10 m, we will use the concept of work-energy theorem and the equation for work done against gravity. The work-energy theorem states that the work done on an object is equal to the change in its potential energy.

First, let's determine the change in potential energy (ΔPE). The potential energy is given by the equation

PE = m * g * h

where m is the mass, g is the gravitational acceleration (9.81 m/s²), and h is the height.

In this case,

m = 100 kg and h = 10 m.

Thus,

ΔPE = 100 kg * 9.81 m/s² * 10 m

= 9810 J (Joules).

Now, let's calculate the work done (W) to push the ball up the ramp. Work is defined as the force (F) applied to an object multiplied by the distance (d) over which the force is applied. In this case, the distance is the length of the ramp (50 m).

The equation for work is

W = F * d.

Since the work done equals the change in potential energy, we can write the equation as

9810 J = F * 50 m.

To solve for the force (F), we can divide both sides of the equation by 50 m:

F = 9810 J / 50 m

= 196.2 N (Newtons).

Therefore, a force of 196.2 N must be exerted to push the 100 kg ball up the 50 m ramp to a height of 10 m.

To know more about force, refer to the link below:

https://brainly.com/question/14642565#

#SPJ11

Because surface water molecules absorb the heat from the bulk water and begin to evaporate, evaporation is an endothermic process.

It was clear that the student's skin was warmer than the bracelet's original temperature. The second law of thermodynamics states that heat moves from a temperature that is higher to one that is lower. As a result, the student's skin generates heat that is transferred to the bracelet, warming it.

Acceptable answers comprise, but are not restricted to: Copper is less likely to react with things in the air or on the skin than iron because copper has a lower chemical activity. The most prevalent element in the universe, hydrogen, has isotopes called deuterium and tritium. All hydrogen isotopes have one proton, however deuterium also contains one neutron and tritium.

Learn more about heat visit: brainly.com/question/934320

#SPJ4

1.67 m From the center of a frictionless playground, 23.9-kg boy stands  merry-go-round, with a moment of inertia of 221.3 kg m2. The boy begins to run in a circular path with a speed of 0.71 m/s relative to the ground. Then the angular velocity of the merry-go-round is  0.23 rad/s.

Initially, the merry-go-round is at rest, so its angular momentum is zero. The boy's angular momentum is given by:

L = Iω

where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

Substituting the values given in the problem, we have:

L = (221.3 kg[tex]m^2[/tex]) ω

When the boy starts running, he also starts rotating around the center of the merry-go-round. Since the playground is frictionless, there is no external torque acting on the system, so the angular momentum is conserved.

At the final state, the boy and the merry-go-round are rotating together, so their angular momentum add up:

Lfinal = (221.3 kg[tex]m^2[/tex] + mboy[tex]r^2[/tex]) ωfinal

where mboy is the mass of the boy, r is his distance from the center, and ωfinal is the final angular velocity of the system.

Substituting the values given in the problem, we have:

(221.3 kg[tex]m^2[/tex]) ω = (221.3 kg [tex]m^2[/tex]+ (23.9 kg)[tex](1.67 m)^2[/tex]) ωfinal

Simplifying and solving for ωfinal, we get:

ωfinal = ω (221.3 kg[tex]m^2[/tex]) / (221.3 kg [tex]m^2[/tex] + (23.9 kg)[tex](1.67 m)^2[/tex])

Substituting ω = v / r, where v is the boy's speed relative to the ground and r is his distance from the center, we have:

ωfinal = (0.71 m/s) / 1.67 m (221.3 kg [tex]m^2[/tex]) / (221.3 kg[tex]m^2[/tex] + (23.9 kg)[tex](1.67 m)^2[/tex])

Simplifying and solving, we get:

ωfinal = 0.23 rad/s

Therefore, the angular velocity of the merry-go-round is 0.23 rad/s.

To learn more about  angular momentum visit:                  https://brainly.com/question/4126751

#SPJ11

It will take 11.1 ms for the capacitor to lose half its initial stored energy when discharged through a 4.0 kohm resistor.

To calculate the time it takes for a capacitor to lose half of its initial stored energy when discharged through a resistor, we need to use the equation for the energy stored in a capacitor:
E = 1/2 * C * V^2
Where E is the energy stored in the capacitor, C is the capacitance, and V is the voltage across the capacitor.
When the capacitor is fully discharged, the voltage across it is zero, so the energy stored in the capacitor is also zero.
To find the time it takes for the capacitor to lose half its initial stored energy, we can use the equation:
E = 1/2 * C * V^2 = 1/2 * Q^2 / C
Where Q is the charge stored in the capacitor.
When the capacitor is fully charged, Q = C * V.
So, we can find the charge stored in the capacitor at any time t during the discharge using:
Q = Q0 * e^(-t/RC)
Where Q0 is the initial charge stored in the capacitor, R is the resistance of the circuit, and C is the capacitance of the capacitor.
When the capacitor has lost half of its initial stored energy, the charge stored in the capacitor is:
Q = sqrt(2E0/C) = Q0/sqrt(2)
So, we can solve for the time it takes for the capacitor to lose half its initial stored energy using:
t = -ln(1/2) * RC = 0.693 * RC
Substituting the given values, we get:
t = 0.693 * (4.0 kohm * 4.0 mF) = 11.1 ms
Therefore, it will take 11.1 ms for the capacitor to lose half its initial stored energy when discharged through a 4.0 kohm resistor.

learn more about energy here

https://brainly.com/question/16243767

#SPJ11

The required solar array area in m^2 for a spacecraft in cislunar space given an inherent installation loss of 0.81, angle of incidence of 10 degrees, GaAs solar cells, 0.031 degradation per year, 10 year operational lifetime, and a solar array power of 2,760 Watts can be calculated as follows:

1. Determine the incident solar energy. In cislunar space, the solar constant is approximately 1361 W/m^2. Considering the angle of incidence of 10 degrees, the solar energy will be reduced. Calculate the reduction factor as the cosine of the angle: cos(10°) = 0.9848. So, the adjusted solar energy is 1361 W/m^2 * 0.9848 = 1340.83 W/m^2.

2. Account for the inherent installation loss (0.81): Adjusted solar energy with installation loss = 1340.83 W/m^2 * 0.81 = 1086.07 W/m^2.

3. Determine the efficiency of the GaAs solar cells. GaAs solar cells typically have an efficiency of around 28%. So, the available power from the solar cells is: 1086.07 W/m^2 * 0.28 = 303.7 W/m^2.

4. Calculate the degradation factor. With 0.031 degradation per year and a 10-year operational lifetime, the total degradation is 0.031 * 10 = 0.31. The solar cells will have an efficiency of 1 - 0.31 = 0.69 at the end of their lifetime.

5. Adjust the available power for degradation: 303.7 W/m^2 * 0.69 = 209.55 W/m^2.

6. Finally, to find the required solar array area, divide the desired solar array power (2,760 Watts) by the degraded available power: 2,760 W / 209.55 W/m^2 ≈ 13.17 m^2.

So, the required solar array area for the spacecraft in cislunar space is approximately 13.17 m^2.

Learn more about area at: https://brainly.com/question/25292087

#SPJ11

The expression for the component of the object's weight force that is parallel to the incline can be found using trigonometry. It is equal to the weight force of the object (which is its mass multiplied by the acceleration due to gravity) multiplied by the sine of the angle of inclination.

This is because the weight force can be resolved into two components - one parallel to the incline and one perpendicular to it. The parallel component is equal to the weight force multiplied by the sine of the angle, while the perpendicular component is equal to the weight force multiplied by the cosine of the angle.

When an object sits on an inclined plane that makes an angle (θ) with the horizontal, the component of the object's weight force that is parallel to the incline can be calculated using the expression: F_parallel = mg * sin(θ), where m is the object's mass, g is the acceleration due to gravity, and θ is the angle between the inclined plane and the horizontal.

To know more about trigonometry please visit....

/brainly.in/question/1445116

#SPJ11

A. Indirect sound reflections refer to the sound waves that bounce off surfaces in a room before reaching the listener.

The major concern involved in architectural acoustics is how indirect sound reflections change sound quality.

These reflections can affect the sound quality by altering the characteristics of the sound, such as its clarity, intelligibility, and reverberation.

Architectural acoustics aims to optimize the design and arrangement of spaces to control and manage these indirect sound reflections.

This involves techniques such as the strategic placement of sound-absorbing materials, the use of diffusers to scatter sound waves, and the control of room dimensions and shapes to minimize undesirable echoes and reverberation.

While direct sound reflections can also influence the sound quality, they are often less of a concern in architectural acoustics compared to indirect reflections.

Direct sound refers to the sound that reaches the listener without any significant interaction with the room's surfaces. However, the design of architectural spaces can still consider the control of direct reflections to improve sound clarity and intelligibility in specific scenarios.

Therefore, among the given options, A. indirect sound reflections changing sound quality is the primary concern in architectural acoustics.

To learn more about sound, refer below:

https://brainly.com/question/29707602

#SPJ11

The weight of the person does not decrease when they go from sea level to the mountain top.

To determine the change in weight of a 100-kg person when going from sea level to a mountain top, we need to consider the variation in gravitational acceleration with respect to the change in altitude.

At sea level, the standard average value for gravitational acceleration is approximately 9.8 m/s². However, as we move to higher altitudes, the gravitational acceleration decreases slightly.

The formula for calculating weight (W) is given by:

W = mass * gravitational acceleration.

Let's calculate the weight at sea level:

W_sea_level = 100 kg * 9.8 m/s² = 980 N.

Now, we need to determine the change in gravitational acceleration as we move from sea level to the mountain top.

The change in gravitational acceleration with respect to altitude is quite small and can be neglected for most practical purposes unless we are dealing with extremely high altitudes or precision calculations.

Therefore, for simplicity, we can assume that the gravitational acceleration remains approximately constant as the person moves from sea level to the mountain top. In reality, the change in altitude is not significant enough to affect the gravitational acceleration significantly.

Thus, the weight of the person does not decrease. It remains approximately the same at 980 N, assuming negligible changes in gravitational acceleration due to the altitude difference.

To learn more about standard, refer below:

https://brainly.com/question/31979065

#SPJ11

The spacing of the resulting lines on the screen will depend on the spacing of the diffraction grating and the wavelength of the light.

When light passes through a diffraction grating, it diffracts or bends as it interacts with the closely spaced slits in the grating.

The diffracted light waves interfere with each other, creating a pattern of bright and dark lines on a screen placed behind the grating. The spacing between the lines on the screen is determined by the distance between the slits in the grating and the wavelength of the light.
In the case of blue light with a wavelength of 434 nm, the spacing of the lines on the screen will be smaller than if a longer wavelength of light was used.

This is because shorter wavelengths of light diffract more than longer wavelengths, resulting in a wider spread of the light on the screen. Therefore, the lines on the screen will be closer together.
The spacing of the resulting lines on the screen will depend on the spacing of the diffraction grating and the wavelength of the light. Shorter wavelengths of light will produce lines that are closer together than longer wavelengths of light.

For more information on wavelength kindly visit to

https://brainly.com/question/31414745

#SPJ11

The motion of a swing is a periodic motion, that means it takes one period for a back and forth motion, which is constant. Here it is 12s, so it will take 12s for a back and forth motion, no matter the distance. The length of the rope in the given case is 11.8m

What is periodic motion?

The motion of a swing is a periodic motion that goes back and forth. The time it takes to complete one back and forth motion is called the period. In this case, the period of the swing is 12 s, which means it takes 12 s to swing from one side to the other and back again, no matter the distance.

The length of the rope affects the distance the swing travels, but not the period of the motion. This is because the period only depends on the gravitational force acting on the swing and the length of the rope, not on the distance traveled.

To determine the length of the rope, we need to know the distance the swing travels in one back and forth motion. Let's assume that the swing travels a distance of 4 meters from one side to the other. This means that the total distance traveled in one back and forth motion is 8 meters.

The period of the motion is given by the formula T=2π√(L/g), where T is the period, L is the length of the rope, and g is the acceleration due to gravity. We know that T=12 s and g=9.81 m/s². Substituting these values into the formula, we get:

12=2π√(L/9.81)

Squaring both sides and rearranging, we get:

L=(12/π)²×9.81/4

L=11.8 meters (approximately)

Therefore, the length of the rope is approximately 11.8 meters.

To know more about  periodic motion  visit:

https://brainly.com/question/28249471

#SPJ11

Heat energy travels from an object with a higher temperature to an object with a lower temperature.

Heat always flows from hot to cold objects due to the difference in their internal energy. This flow of heat continues until both objects reach thermal equilibrium or the same temperature. Heat transfer occurs due to the difference in temperature between two objects. The object with higher temperature has more thermal energy, and this energy flows to the object with lower temperature in an attempt to reach a state of equilibrium.
Therefore, heat energy moves from a high temperature object to a lower temperature object until both objects reach the same temperature.

To know more about heat energy, click here

https://brainly.com/question/25384702

#SPJ11

The magnitude of the angular momentum of the thin rod is 17.5 kg [tex]m^2[/tex]/s.

The angular momentum of the thin rod can be calculated using the formula L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

To find the moment of inertia, we need to know the shape of the rod. Let's assume that it is a uniform thin rod, rotating about an axis passing through its center. In this case, the moment of inertia of the rod is given by I = (1/12) m[tex]L^2[/tex], where m is the mass of the rod and L is its length.

Substituting the given values, we get:

m = 3.6 kg
L = 2.6 m

Therefore, the moment of inertia is:

I = (1/12) m[tex]L^2[/tex]
I = (1/12) (3.6 kg) [tex](2.6 m)^2[/tex] = 0.752 kg [tex]m^2[/tex]

Now, we can calculate the angular momentum using the formula:

L = Iω

where ω is the angular velocity, given as 3.7 revolutions per second. To convert revolutions per second to radians per second, we need to multiply by 2π since there are 2π radians in one revolution. Therefore:

ω = (3.7 rev/s) (2π rad/rev) = 23.25 rad/s

Substituting the values, we get:

L = (0.752 kg [tex]m^2[/tex]) (23.25 rad/s) = 17.5 kg [tex]m^2[/tex]/s

Therefore, the magnitude of the angular momentum is 17.5 kg [tex]m^2[/tex]/s.

Know more about Angular momentum here :

https://brainly.com/question/4126751

#SPJ11

The brass rod expands about 0.0583 mm more than the invar rod when the temperature increases by 5.0°C.

To determine the difference in expansion between a 655-mm-long brass rod and an invar rod when the temperature increases by 5.0°C.

First, let's recall the formula for linear thermal expansion: ΔL = L₀ * α * ΔT, where ΔL is the change in length, L₀ is the original length, α is the coefficient of linear expansion, and ΔT is the change in temperature.

For brass, the coefficient of linear expansion (α) is approximately 19 x 10⁻⁶/°C, and for invar, it's approximately 1.2 x 10⁻⁶/°C. The temperature change, ΔT, is given as 5.0°C, and the original length, L₀, is 655 mm for both rods.

Now, let's calculate the change in length for each rod:

ΔL_brass = 655 mm * 19 x 10⁻⁶/°C * 5.0°C ≈ 0.0622 mm
ΔL_invar = 655 mm * 1.2 x 10⁻⁶/°C * 5.0°C ≈ 0.0039 mm

Next, we'll find the difference in expansion between the two rods:

Difference = ΔL_brass - ΔL_invar ≈ 0.0622 mm - 0.0039 mm ≈ 0.0583 mm

So, the brass rod expands about 0.0583 mm more than the invar rod when the temperature increases by 5.0°C.

To know more about temperature, refer here:

https://brainly.com/question/13694966#

#SPJ11

Complete question:

Two students each build a piece of scientific equipment that uses a 655-mm-long metal rod. One student uses a brass rod, the other an invar rod. If the temperature increases by 5.0 C, how much more does the brass rod expand than the invar rod

Sunspots are cooler regions on the surface of the Sun that appear as dark spots.

They are cooler because they have a lower temperature than the surrounding photosphere. The photosphere is the visible surface of the Sun and is the layer where the energy generated by nuclear fusion is radiated out into space.

The temperature of the photosphere is around 6000 K, whereas the temperature of sunspots can be as low as 3000 K.  The amount of energy emitted by a surface depends on its temperature and surface area.

The energy emitted by a surface per unit area and per unit time is given by the Stefan-Boltzmann law. According to this law, the energy radiated per unit area per unit time is proportional to the fourth power of the temperature.

This means that if the temperature of a surface is halved, the energy radiated per unit area per unit time decreases by a factor of 16.

Therefore, the ratio of the amount of energy emitted by the sunspot to the amount of energy emitted by the photosphere per unit area and per unit time can be calculated using the Stefan-Boltzmann law.

The ratio of the energy emitted by the sunspot to the energy emitted by the photosphere is given by: (E_s / E_p) = (T_s / T_p)^4,

Where E_s is the energy emitted by the sunspot per unit area and per unit time, E_p is the energy emitted by the photosphere per unit area and per unit time, T_s is the temperature of the sunspot, and T_p is the temperature of the photosphere.

Using the temperatures given in the question, we can calculate the ratio of the energy emitted by the sunspot to the energy emitted by the photosphere: (E_s / E_p) = (3000 K / 6000 K)^4, (E_s / E_p) = (0.5)^4, (E_s / E_p) = 0.0625

Therefore, the ratio of the energy emitted by the sunspot to the energy emitted by the photosphere per unit area and per unit time is 0.0625. This means that the sunspot is emitting much less energy per unit area and per unit time than the photosphere.

To know more about temperatures click here

brainly.com/question/30074492

#SPJ11

If the static friction between ball and track were negligible so that the ball slid instead of rolling, then the kinetic energy of the ball decreases, so the speed of the ball reduces and the ball might not even make it to the top of the loop if there is not enough initial speed or enough height to overcome the frictional forces.

If the static friction between the ball and the track were negligible and the ball were sliding instead of rolling, the ball would lose energy due to frictional forces. As the ball moves up the track towards the top of the loop, it would experience an increase in potential energy and a decrease in kinetic energy.

This would cause the ball to slow down and lose speed. Therefore, the speed of the ball at the top of the loop would be less than if there were static friction present and the ball were rolling. In fact, the ball might not even make it to the top of the loop if there is not enough initial speed or enough height to overcome the frictional forces.

To know more about static friction visit:

https://brainly.com/question/13000653

#SPJ11

The magnitude of the electric field is [tex]$E = 5.76 \times 10^6 \mathrm{N/C}$[/tex]

We can use the formula for the force on a charged particle in an electric field, and the formula for acceleration to solve for the electric field.

The force on a charged particle in an electric field is given by:

F = qE

where F is the force, q is the charge, and E is the electric field.

The formula for acceleration is:

a = F/m

where a is the acceleration, F is the force, and m is the mass.

Substituting F from the first equation into the second equation, we get:

a = qE/m

Solving for E, we get:

E = ma/q

Substituting the given values, we get:

[tex]$E = \frac{(1.5 \times 10^{-15} \mathrm{kg}) \times (6.33 \times 10^7 \mathrm{m/s}^2)}{1.65 \times 10^{-9} \mathrm{C}}$[/tex]

Simplifying, we get:

[tex]$E = 5.76 \times 10^6 \mathrm{N/C}$[/tex]

To learn more about magnitude

https://brainly.com/question/15681399

#SPJ4

The wavelength of the earthquake that shook you with a frequency of 13.5 Hz and got to another city 83.0 km away in 12.0 s is approximately 512.37 meters.

To determine the wavelength of an earthquake, we need to use the formula:

wavelength = speed of earthquake/frequency

The speed of an earthquake depends on the type of rock it travels through, but for this question, we can assume it's traveling through the Earth's crust, which has an average speed of about 5 km/s.

Converting the distance between the two cities to meters, we have:

83.0 km = 83,000 m

Using the time it takes for the earthquake to travel from one city to another, we can calculate the speed:

speed = distance/time
speed = 83,000 m / 12.0 s
speed = 6,917 m/s

Now we can plug in the frequency and speed to find the wavelength:

wavelength = speed/frequency
wavelength = 6,917 m/s / 13.5 Hz
wavelength = 512.37 m

You can learn more about wavelength at: brainly.com/question/4112024

#SPJ11

For an object infinitely far away, the lens should be at the focal length. For a specific distance, use the lens equation.

When focusing an object that is infinitely far away, the incoming light rays are parallel with the principal axis of the system.

In this case, the lens should be at its focal length to achieve focus.

This is because parallel rays of light converge to a single point at the focal length of the lens.

For objects at specific distances, the lens equation can be used to determine the required distance between the lens and the film or CCD chip.

The lens equation is 1/f = 1/s + 1/s', where f is the focal length of the lens, s is the distance from the lens to the object, and s' is the distance from the lens to the image.

By rearranging the equation, the distance from the lens to the image can be calculated.

For more such questions on object, click on:

https://brainly.com/question/28308143

#SPJ11

The smallest radius of the unbanked track around which the bicyclist can travel is approximately 10.37 meters.

To determine the smallest radius of an unbanked (flat) track for a bicyclist traveling at 23 km/h with a coefficient of static friction of 0.40, we can use the following equation:

r = v² / (g × μ)

where r is the radius, v is the speed (converted to m/s), g is the acceleration due to gravity (9.81 m/s²), and μ is the coefficient of static friction.

First, convert 23 km/h to m/s: (23 × 1000) / 3600 = 6.39 m/s.

Now, plug in the values to find the smallest radius:

r = (6.39 m/s)² / (9.81 m/s² × 0.40) ≈ 10.37 m

This radius ensures that the centripetal force required for the bicyclist to maintain her curved path is equal to the maximum static frictional force provided by the tires and track, preventing the bicyclist from skidding or losing traction.

You can learn more about radius at: brainly.com/question/24051825

#SPJ11

The estimated mass of the supermassive black hole at the center of this galaxy would be approximately 3.6 billion solar masses.

The mass of the supermassive black hole at the center of a bulge in a galaxy can be estimated using the bulge's velocity dispersion.

Assuming the M-sigma relation holds for this galaxy, we can use the following equation to estimate the mass of the supermassive black hole at the center:

M_bh = ([tex]sigma^2[/tex] * R) / G

where M_bh is the mass of the black hole, sigma is the velocity dispersion of stars in the bulge, R is the radius of the bulge, and G is the gravitational constant.

Assuming a velocity dispersion of 200 km/s and a bulge radius of 5 kpc (kiloparsecs), we get:

M_bh = (200 km/s[tex])^2[/tex] * 5 kpc * (3.086 × 10^19 m/kpc) / (6.674 × [tex]10^-11[/tex]N*(m/kg[tex])^2[/tex])

= 3.6 x [tex]10^9[/tex]solar masses

Learn more about gravitational constant here:

https://brainly.com/question/858421

#SPJ11

Therefore, the charge is 1.20 x [tex]10^{-9[/tex] Coulombs.

The physical field that envelopes electrically charged particles and pulls or attracts all other charged particles in the vicinity is known as an electric field. Additionally, it describes the physical environment of a system of charged particles.  

An electric field, which is measured in Volts per metre (V/m), is an invisible force field produced by the attraction and repulsion of electrical charges (the source of electric flow). As you move away from the field source, the electric field's strength weakens.

The electric field due to a point charge at a distance r is given by:

E = k*q/[tex]r^{2}[/tex]

where k is the Coulomb constant (k = 8.99 x [tex]10^{-9[/tex] Nm/C) and q is the charge.

Rearranging the equation, we have:

q = E*[tex]r^{2}[/tex] 2/k

Substituting the given values, we get:

q = (3 V/m) * (0.6 m) / (8.99 x [tex]10^{-9[/tex] Nm/C)

q = 1.20 x [tex]10^{-9[/tex] C

Therefore, the charge is 1.20 x [tex]10^{-9[/tex] Coulombs.

Learn more about charge visit: brainly.com/question/18102056

#SPJ4

The power that can be generated from water going over a 10 m waterfall at a rate of 100 kg per second can be calculated using the formula P = mgh, where P is power, m is mass, g is the acceleration due to gravity (9.81 m/s^2), and h is the height of the waterfall.

Using the given values, we can calculate the power as follows:

P = (100 kg/s) x (9.81 m/s^2) x (10 m)
P = 9,810 watts or 9.81 kilowatts

Therefore, it is possible to receive up to 9.81 kilowatts of power from water going over a 10 m waterfall at a rate of 100 kg per second.

1. Calculate the gravitational potential energy (PE): PE = m * g * h
  Here, m = 100 kg (mass), g = 9.81 m/s² (gravitational acceleration), and h = 10 m (height).
  PE = 100 kg * 9.81 m/s² * 10 m = 9810 J (joules)

2. The energy is converted into kinetic energy, which can be used to calculate the power (P) generated. To calculate the power, divide the energy by time (t).
  Since the rate is 100 kg per second, the time (t) is 1 second.

3. Calculate the power (P): P = PE / t
  P = 9810 J / 1 s = 9810 W (watts)

So, the maximum power possible to receive from water going over a 10-meter waterfall at a rate of 100 kg per second is 9810 watts.

to know more about  potential energy (PE) here:

brainly.com/question/12068011

#SPJ11

The cat's speed as it passes the hunk of cheese is approximately 17.4 m/s.

To find the cat's speed as it passes the hunk of cheese, we need to consider the net force acting on it, it's mass, and the distance it travels.

The net force components are 5.3 N, 5.6 N/m, and 1.7 N/m². The terms we will include in our answer are net force, speed, and from rest.

To calculate the total net force acting on the cat,

Net force = 5.3 N + (5.6 N/m × 8.4 m) + (1.7 N/m² × (8.4 m)²)
Net force = 5.3 N + 47.04 N + 119.364 N
Net force ≈ 171.7 N

Newton's second law of motion (F = ma) is applied to find the cat's acceleration.
171.7 N = 9.5 kg × a
a ≈ 18.1 m/s²

The kinematic equation is used to find the cat's final speed (Vf), given that it starts from rest (initial speed vi = 0).
vf² = vi² + 2 × a × d
vf² = 0 + 2 × 18.1 m/s² × 8.4 m
vf² = 304.08
vf ≈ √304.08 ≈ 17.4 m/s

So, the cat's speed as it passes the hunk of cheese is approximately 17.4 m/s.

Learn more about speed when acted upon by net force at: https://brainly.com/question/28225565

#SPJ11

The rotation of the Earth on its axis causes a periodic change in the position of the Moon and the Sun relative to any given location on the Earth's surface.

Earth is typically viewed as a massive, rotating, and gravitationally-bound celestial body that orbits around the sun. It has a radius of approximately 6,371 kilometers and a mass of approximately 5.97 x 10^24 kilograms. Earth's rotation on its axis produces day and night cycles, and its orbital motion around the sun produces the yearly cycle of seasons.

Earth's gravity plays a crucial role in many physical phenomena, such as tides, atmospheric pressure, and the motion of objects on its surface. Additionally, Earth's magnetic field helps to protect the planet from the charged particles of the solar wind. In terms of energy, Earth receives radiation from the sun and emits radiation in the form of heat.

To learn more about Earth visit here:

brainly.com/question/31064851

#SPJ4

The angular velocity of the forearm is approximately 104 radians per second.

We can use the formula for angular velocity, which is ω = v/r, where v is the linear velocity (in meters per second), r is the distance from the axis of rotation (in meters), and ω is the angular velocity (in radians per second). In this case, the linear velocity is 34.3 m/s and the distance from the elbow joint is 0.330 m. Therefore, we can calculate the angular velocity as:

ω = v/r = 34.3 m/s / 0.330 m ≈ 104 rad/s

So the angular velocity of the forearm during the pitch is approximately 104 radians per second.

learn more about angular velocity

https://brainly.com/question/29342095

#SPJ11