The conservation of momentum equation shows that the total initial momentum of the two objects before the collision is equal to the total final momentum after the collision, which in this case is zero.
To describe the collision of two objects coming to rest using the conservation of momentum, we'll consider the following terms: initial momentum, final momentum, and conservation of momentum equation.
1. Initial momentum: Before the collision, each object has its own momentum, which is the product of its mass and velocity. The total initial momentum is the sum of the individual momenta.
2. Final momentum: After the collision, both objects come to rest, which means their final velocities are zero. Thus, their final momentum is also zero.
3. Conservation of momentum equation: According to the law of conservation of momentum, the total initial momentum of the system is equal to the total final momentum of the system. Mathematically, this can be expressed as:
m1*v1_initial + m2*v2_initial = m1*v1_final + m2*v2_final
Since both objects come to rest, their final velocities (v1_final and v2_final) are zero, so the equation becomes:
m1*v1_initial + m2*v2_initial = 0
Therefore, we can use the equation of conservation of momentum to describe this situation by stating that the total momentum before the collision is equal to the total momentum after the collision, which is zero.
To know more about conservation of momentum, click here
https://brainly.com/question/3920210
#SPJ11
What value do technicians on ship B get by measuring the speed of the light emitted by ship A's headlight
The value technicians on ship B get by measuring the speed of light emitted by ship A's headlight is approximately 299,792 kilometers per second (km/s), which is the constant speed of light in a vacuum.
The speed of light is a fundamental constant in the universe and does not change regardless of the relative motion of the observer (technicians on ship B) and the source of light (ship A's headlight).
The speed of light in a vacuum is always approximately 299,792 km/s, and this value will be measured by the technicians on ship B.
1. Technicians on ship B will use an appropriate instrument to measure the speed of light emitted by ship A's headlight.
2. The instrument will detect the light waves from ship A's headlight.
3. The speed of light will be calculated based on the time it takes for the light waves to travel a known distance.
4. The result will be the constant speed of light in a vacuum, approximately 299,792 km/s.
By measuring the speed of light emitted by ship A's headlight, technicians on ship B will obtain the constant value of approximately 299,792 km/s, which is the speed of light in a vacuum. This value does not change due to the relative motion of the observer and the source of light.
For more information on light emission kindly visit to
https://brainly.com/question/29352228
#SPJ11
Our Sun is considered to be a ______. low-mass star brown dwarf high-mass star intermediate-mass star
Our Sun is considered to be an intermediate-mass star. The correct answer in D.
As an intermediate-mass star, the Sun has a mass between 0.5 and 8 times that of the solar mass and is in the main sequence phase of its life cycle. It fuses hydrogen into helium in its core, generating energy that we receive as sunlight.
Compared to low-mass stars (like red dwarfs) and high-mass stars (like blue giants), intermediate-mass stars like the Sun have a relatively moderate lifespan of about 10 billion years before they eventually evolve into red giants and end their lives as white dwarfs.
Therefore the correct answer is D, intermediate-mass star.
To know more about Sun, refer here:
https://brainly.com/question/31110366?referrer=searchResults
#SPJ11
Complete question:
Our Sun is considered to be a ______.
a. low-mass star
b. brown dwarf
c. high-mass star
d. intermediate-mass star
a speedboat has a mass of 5.0x10 2 kg starting at rest, it travels to 220 m/s in 3.0 s. find the net force on the boat
The net force on the boat is 3.67 x 10⁴ N.
We can use the equation F=ma, where F is the net force, m is the mass, and a is the acceleration. First, we need to find the acceleration of the boat using the equation a = (vf - vi) / t, where vf is the final velocity, vi is the initial velocity (which is 0 in this case), and t is the time. Plugging in the given values, we get:
a = (220 m/s - 0 m/s) / 3.0 sa = 73.3 m/s²Now, we can find the net force using the equation F=ma:
F = (5.0x10² kg)(73.3 m/s²)F = 3.67 x 10⁴ NTherefore, the net force on the boat is 3.67 x 10⁴ N.
To learn more about net force, here
https://brainly.com/question/29261584
#SPJ1
A performer seated on a trapeze is swinging back and forth with a period of 8.68 s. If she stands up, thus raising the center of mass of the trapeze performer system by 36.6 cm, what will be the new period of the system
The performer stands up on the trapeze, the center of mass of the system shifts upwards, causing a change in the moment of inertia of the system. As a result, the new period of the system will be different from the initial period. To calculate the new period, we can use the conservation of mechanical energy principle, which states that the total mechanical energy of the system remains constant.
The highest point of the swing, all of the potential energy of the system is converted into kinetic energy, and at the lowest point, all of the kinetic energy is converted back into potential energy. Using this principle, we can equate the initial and final mechanical energies of the system initial mechanical energy = final mechanical energy (1/2) mv^2 + mgs = (1/2) mv'^2 + mg (h + Δh) where m is the mass of the performer and trapeze, v is the initial velocity of the system, h is the initial height of the center of mass, v' is the final velocity of the system, h + Δh is the final height of the center of mass (36.6 cm higher than the initial height), and g is the acceleration due to gravity. We can rearrange this equation to solve for the final velocity of the system v' = sqrt [(2gh + 2gΔh) / m] Substituting the values given in the problem, we get v' = sqrt [(2(9.8 m/s^2) (0.5 m) + 2(9.8 m/s^2) (0.366 m)) / m] = 4.26 m/s The new period of the system can then be calculated using the forms T = 2πL / v' where L is the length of the pendulum Assuming that the length of the pendulum remains constant, we can calculate the new period T = 2π(0.5 m) / 4.26 m/s = 2.93 s Therefore, the new period of the system is approximately 2.93 seconds.
learn more about trapeze here.
https://brainly.com/question/29761433
#SPJ11
A proton is located at a distance of 0.431 m from a point charge of 8.49 C. The repulsive electric force moves the proton until it is at a distance of 1.61 m from the charge. Suppose that the electric potential energy lost by the system is carried off by a photon that is emitted during the process. What is its wavelength
By using relationship between electric potential energy, electric force, and distance the wavelength of the photon emitted during the process is 705 nm.
To solve this problem, we need to use the relationship between electric potential energy, electric force, and distance:
ΔPE = q * ΔVΔV = - ∫ E * drF = k * q1 * q2 / [tex]r^{2}[/tex] where ΔPE is the change in electric potential energy, q is the charge, ΔV is the change in electric potential, E is the electric field, r is the distance between the charges, F is the electric force, k is the Coulomb constant.
We can use the electric force equation to find the initial force between the proton and the point charge:
[tex]F1 = k * q1 * q2 / r1^{2}F1[/tex]
[tex]= 9 * 10^{9} * (1.6 * 10^{-19}) *\frac{ (8.49)}{(0.431)^{2}F1 }[/tex]
[tex]= 3.67 * 10^{-8} N[/tex] Next, we can use the work-energy principle to find the change in electric potential energy:
ΔPE = W = F1 * dΔPE
[tex]= (3.67 * 10^{-8}) * (1.61 - 0.431)ΔPE[/tex]
[tex]= 2.84 * 10^{-8} J[/tex] Since the energy is carried off by a photon, we can use the equation: E = hc/λwhere E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon.
We can solve for the wavelength by rearranging the equation : We can find the energy of the photon by using the change in electric potential energy:
λ = hc/E
E = ΔPEλ = hc/ΔPEλ
[tex]= (6.63 * 10^{-34} J s) *\frac{(3 * 10^{8} m/s)}{(2.84 * 10^{-8} J)λ }[/tex]
[tex]= 7.05 * 10^{-7} m[/tex] or 705 nm
Therefore, the wavelength of the photon emitted during the process is 705 nm.
To know more about wavelength Visit:
https://brainly.com/question/31143857
#SPJ11
An engine outputs 100.0 J of heat after taking in 125 J of heat in a cycle. How much work does it do per cycle
To determine the work done by an engine per cycle, we need to apply the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat supplied to the system minus the work done by the system. In mathematical terms:
ΔU = Q - W
where ΔU is the change in internal energy, Q is the heat supplied to the system, and W is the work done by the system.
In this case, the engine takes in 125 J of heat and outputs 100 J of heat, which means that the engine is not a perfect machine and some of the energy is lost as waste heat. We can calculate the change in internal energy as follows:
ΔU = Q_in - Q_out
ΔU = 125 J - 100 J
ΔU = 25 J
This means that the engine has gained 25 J of internal energy during the cycle. We can then rearrange the first law of thermodynamics equation to solve for the work done by the engine:
W = Q_in - Q_out - ΔU
W = 125 J - 100 J - 25 J
W = 0 J
This indicates that the engine has not done any work during the cycle since the work done is equal to zero. Therefore, the engine is not a heat engine but rather a heat pump or refrigerator, which transfers heat from a colder reservoir to a hotter one, consuming work in the process.
for more such questions on thermodynamics
https://brainly.com/question/13059309
#SPJ11
An object slides down a frictionless 33 degree incline whose vertical height is 70.2 cm. How fast is it going in meters/second when it reaches the bottom
When it reaches the bottom of the incline, the object will be going at a speed of approximately 3.73 meters/second.
To find the speed of the object when it reaches the bottom of the frictionless 33-degree incline, you can use the conservation of mechanical energy principle. The potential energy (PE) at the top is converted into kinetic energy (KE) at the bottom.
First, let's convert the vertical height from centimeters to meters: 70.2 cm = 0.702 m
Next, we need to find the gravitational potential energy (PE) at the top of the incline, which is given by the formula: PE = mgh, where m is the mass of the object, g is the acceleration due to gravity (9.81 m/s²), and h is the vertical height (0.702 m). Note that since we are looking for the final speed and not the kinetic energy itself, the mass will cancel out, so we don't need to know its value.
When the object reaches the bottom, all of its potential energy is converted into kinetic energy (KE), which is given by the formula: KE = 0.5 * m * v², where v is the speed we're looking for.
Since the mass cancels out, we can equate the potential energy and kinetic energy:
mgh = 0.5 * m * v²
Now, we can solve for v:
v² = 2 * g * h
v = √(2 * 9.81 * 0.702)
v ≈ 3.73 m/s
So, the object will be going approximately 3.73 meters/second when it reaches the bottom of the incline.
More on speed: https://brainly.com/question/12615415
#SPJ11
What is the wavelength of peak emission for a black body at 37°C? (c = 3.0 × 108 m/s, Wien displacement law constant is 2.9 × 10-3 m ∙ K, σ = 5.67 × 10-8 W/m2 ∙ K4)
The wavelength of peak emission for a black body at 37°C is approximately 9.36 micrometers (or 9,360 nanometers).
To find the wavelength of peak emission for a black body at 37°C, we can use Wien's displacement law, which states that the wavelength of maximum intensity (or peak emission) of a black body radiation is inversely proportional to its temperature.
The formula for Wien's displacement law is:
λmax = b/T
where λmax is the wavelength of maximum intensity, T is the temperature in Kelvin, and b is the Wien displacement law constant (2.9 × 10-3 m ∙ K).
To convert 37°C to Kelvin, we add 273.15:
T = 37°C + 273.15 = 310.15 K
Now we can plug in the values and solve for λmax:
λmax = (2.9 × 10-3 m ∙ K) / 310.15 K
λmax = 9.36 × 10-6 meters
Therefore, the wavelength of peak emission for a black body at 37°C is approximately 9.36 micrometers (or 9,360 nanometers).
Note: In this problem, we did not need to use the value of σ (Stefan-Boltzmann constant) because it is used to calculate the total energy emitted by a black body at a certain temperature, not the wavelength of peak emission.
Learn more about wavelength here:
https://brainly.com/question/31143857
#SPJ11
Suppose a planet is discovered orbiting a distant star with 16 times the mass of the Earth and 1/16 its radius. How does the escape speed on this planet compare with that of the Earth? Express your answer using two significant figures. E AO OE?
The escape speed on the discovered planet is[tex]1.6 * 10^1[/tex]times greater than that of Earth.
To determine the escape speed of the discovered planet, we can use the escape speed formula:
[tex]v_e = \sqrt{ (2GM/R)}[/tex]
where v_e is the escape speed, G is the gravitational constant, M is the mass of the planet, and R is the planet's radius.
First, let's find the ratio of escape speeds between the discovered planet and Earth:
ratio = ([tex](v_e_planet) / (v_e_Earth) = \sqrt{[(G * M_planet * R_Earth) / (G * M_Earth * R_planet)]}[/tex]
Since the mass of the discovered planet is 16 times the mass of Earth (M_planet = 16M_Earth) and its radius is 1/16 that of Earth (R_planet = R_Earth/16), we can plug these values into the equation:
ratio = [tex]\sqrt{[(16M_Earth * R_Earth) / (M_Earth * R_Earth/16)]}[/tex]
Simplify the equation:
ratio = [tex]\sqrt{16*16} = \sqrt{256}[/tex]
The ratio of escape speeds is [tex]\sqrt{256}[/tex], which equals 16. Therefore, the escape speed on the discovered planet is 16 times greater than that of Earth. Expressing this using two significant figures, we have:
The escape speed on the discovered planet is[tex]1.6 * 10^1[/tex]times greater than that of Earth.
Learn more about earth here:
https://brainly.com/question/13587338
#SPJ11
What is the minimum diameter mirror on a telescope that would allow you to see details as small as 5.00 km on the Moon some 384,000 km away
The minimum diameter of the mirror on a telescope would need to be at least 8.1 meters in order to see details as small as 5.00 km on the Moon from a distance of 384,000 km using Rayleigh criterion.
To see details as small as 5.00 km on the Moon from a distance of 384,000 km, we can use the Rayleigh criterion, which states that the minimum resolvable angle of two objects is given by:
θ = 1.22λ/D
where θ is the minimum resolvable angle, λ is the wavelength of the light being used, and D is the diameter of the mirror. We can assume that we are using visible light with a wavelength of 550 nm (green light).
Rearranging the equation, we get:
D = 1.22λ/θ
Plugging in the values, we get:
D = 1.22 x 550 nm / (5.00 km / 384,000 km)
D = 8.1 meters
Know more about Rayleigh criterion here:
https://brainly.com/question/20113743
#SPJ11
helpp me pls anyone for branleist
The constitution directs the relationship between people and government. Option 1 is correct.
The U.S. Constitution establishes the structure and functions of the government and provides a framework for the relationship between the government and its citizens. It outlines the powers and limitations of the federal government and establishes a system of checks and balances to prevent any one branch from becoming too powerful.
It also includes the Bill of Rights, which outlines the fundamental rights of citizens and limits the government's ability to infringe upon those rights. Thus, the Constitution plays a crucial role in defining and directing the relationship between people and the government. Hence Option 1 is correct.
To learn more about Constitution, here
https://brainly.com/question/29799909
#SPJ1
You are designing a new solenoid and experimenting with material for each turn. The particular turn you are working with is a circular loop of radius 4.50 cm that carries a current of 10.0 A. Calculate the magnetic field ???? at the center of the loop. Use 4????×10−7 T⋅m/A for the permeability of free space ????0.
the magnetic field it produces. Higher permeability materials can increase the strength of the magnetic field.
To calculate the magnetic field (B) at the center of the loop, we'll use the formula:
B = (μ₀ × I) / (2 × R)
Where:
B is the magnetic field
μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A)
I is the current (10.0 A)
R is the radius of the loop (0.045 m)
Step-by-step calculation:
1. Multiply μ₀ by I:
(4π × 10⁻⁷ T·m/A) × (10.0 A) = 40π × 10⁻⁷ T·m
2. Multiply 2 by R:
2 × 0.045 m = 0.09 m
3. Divide the result from step 1 by the result from step 2:
(40π × 10⁻⁷ T·m) / 0.09 m ≈ 4.4 × 10⁻⁶ T
So, the magnetic field at the center of the loop is approximately 4.4 × 10⁻⁶ T.
To know more about magnetic field visit
https://brainly.com/question/14848188
#SPJ11
A 1400-kg car ascends a mountain road at a steady 60 km/h, against a 450-N force of air resistance. If the engine supplies energy to the drive wheels at the rate of 38 kW, what is the slope angle of the road
The slope angle of the road is approximately 7.64°.
we can calculate the slope angle of the road by following these steps:
Step 1: Convert the car's speed to meters per second.
60 km/h * (1000 m/km) / (3600 s/h) = 16.67 m/s
Step 2: Calculate the work done by the engine per second (power) to overcome air resistance.
Power = Force * velocity
Power_air_resistance = 450 N * 16.67 m/s = 7500.5 W
Step 3: Calculate the total power supplied by the engine in watts.
38 kW = 38000 W
Step 4: Determine the power used to overcome the slope.
Power_slope = Total power - Power_air_resistance
Power_slope = 38000 W - 7500.5 W = 30499.5 W
Step 5: Calculate the force exerted by the car to ascend the slope.
Force_slope = Power_slope / velocity
Force_slope = 30499.5 W / 16.67 m/s = 1830 N
Step 6: Calculate the gravitational force acting on the car.
Force_gravity = mass * gravity
Force_gravity = 1400 kg * 9.81 m/s² = 13734 N
Step 7: Calculate the sine of the slope angle.
sin(slope_angle) = Force_slope / Force_gravity
sin(slope_angle) = 1830 N / 13734 N = 0.133
Step 8: Find the slope angle using the arcsine function.
slope_angle = arcsin(0.133) ≈ 7.64°
So, the slope angle of the road is approximately 7.64°.
To know more about angle :
https://brainly.com/question/1920728
#SPJ11
If instead a material with an index of refraction of 1.90 is used for the coating, what should be the minimum non-zero thickness of this film in order to minimize reflection.
The minimum non-zero thickness of a film with an index of refraction of 1.90 can be calculated using the same formula as for the case of a film with an index of refraction of 1.50.
t = (m + 1/2) * λ / (2 * n)
t = (m + 1/2) * λ / (2 * n) = (m + 1/2) * 500 nm / (2 * 1.90) ≈ 132 nm
Refraction is the bending of light as it passes through a material with a different refractive index. The refractive index is a measure of how much a material can slow down light as it travels through it. When light enters a material with a different refractive index, it changes direction due to the change in speed. This change in direction is called refraction.
The amount of refraction that occurs depends on the angle at which the light enters the material, the refractive index of the material, and the wavelength of the light. Refraction is responsible for many optical phenomena, such as the way lenses focus light in eyeglasses, the formation of rainbows, and the appearance of objects underwater.
To learn more about Refraction visit here:
brainly.com/question/14760207
#SPJ4
Consider the temperatures, masses, average velocities, and average kinetic energy of the three kinds of gas in the mixture. What do they have in common
They all have the same average kinetic energy, which is directly proportional to their temperature. This is a consequence of the kinetic theory of gases, which states that the average kinetic energy of gas molecules is directly proportional to the temperature of the gas.
The masses and average velocities of the gases, on the other hand, can vary widely depending on the type of gas. Heavier gases, such as carbon dioxide, will have lower average velocities compared to lighter gases, such as helium, at the same temperature. However, despite these differences, all gases in the mixture will have the same average kinetic energy as long as they are at the same temperature. This is an important principle in thermodynamics, which helps us understand the behaviour of gases under different conditions.
Learn more about velocity here:
https://brainly.com/question/17127206
#SPJ11
A wheel is rolling with a linear speed of 5.00 m/s. If the wheel's radius is 0.08 m, what is the wheel's angular velocity
The angular velocity of a wheel rolling with a linear speed of 5.00 m/s and with a radius of 0.08 m is 62.5 radians per second.
To calculate the wheel's angular velocity, we need to first understand the relationship between speed and angular velocity. Angular velocity is the rate at which an object rotates around its axis, and it is measured in radians per second. Linear speed, on the other hand, is the rate at which an object moves in a straight line and is measured in meters per second.
The formula to relate speed and angular velocity is given by:
Angular Velocity (ω) = Linear Speed (v) / Radius (r)
The given linear speed (v) is 5.00 m/s, and the wheel's radius (r) is 0.08 m.
1. Plug the values into the formula:
ω = 5.00 m/s / 0.08 m
2. Calculate the angular velocity:
ω = 62.5 rad/s
Therefore, the wheel's angular velocity is 62.5 radians per second.
In summary, when a wheel is rolling with a linear speed of 5.00 m/s and has a radius of 0.08 m, the wheel's angular velocity is 62.5 radians per second.
Learn more about angular velocity at: https://brainly.com/question/6860269
#SPJ11
The power of our microwave transmitters is about 15 mW. What is the approximate power of a typical microwave oven?
If, when you set up one of the interference experiments, you get zero signal on the detector, which of the following could be the problem?
You have mixed up which is the mirror and the partial reflector.
You have the power on the transmitter off.
The equipment doesn't like you today.
You have rotated the detector 90° around a horizontal axis (microwaves are polarized).
One or more of the reflectors is misaligned so that the beam does not reach the detector.
Someone's hand is blocking the beam.
You just happen to have the reflectors in position to create destructive interference.
You have the sensitivity of the detector set too low.
If in one of the first two interference experiments you have a maximum signal on the detector, and you move the mirror λ/2 further back, what will you have then? (a maximum, a minimum, neither, could be either)
The microwave transmitters that we use have a frequency of about 10 GHz. What is the approximate wavelength?
A typical microwave oven has a power of about 1000 watts (1 kW). This is much higher than the power of our microwave transmitters, which is only 15 mW (0.015 watts). Microwave ovens use this higher power to heat up food by generating microwaves that cause the water molecules inside the food to vibrate and generate heat.
If, when you set up one of the interference experiments, you get zero signal on the detector, one or more of the reflectors is likely misaligned so that the beam does not reach the detector. Another possibility is that someone's hand is blocking the beam. It is unlikely that the equipment doesn't like you today, as this would not affect the physical setup of the experiment.
If in one of the first two interference experiments you have a maximum signal on the detector, and you move the mirror λ/2 further back, you will have a minimum. This is because the path difference between the two waves will now be λ/2, causing destructive interference.
The approximate wavelength of our microwave transmitters, which have a frequency of 10 GHz, is about 3 cm (0.03 meters). This can be calculated using the formula: wavelength = speed of light / frequency.
learn more about molecules here
https://brainly.com/question/17724287
#SPJ11
A car traveling along the highway brakes to a stop over a certain distance. More braking force is required if the car has more momentum. less stopping distance. more mass. all of the above none of the above
The correct answer is A. more momentum. This is because momentum is the product of an object's mass and velocity, and a car with more momentum will require more force to slow down or stop.
While a shorter stopping distance (option B) would require more force, it is not the determining factor in this scenario. Similarly, a car with more mass (option C) will have more momentum and require more force to stop. Therefore, option D, all of the above, is not correct.
The propensity of a body to continue its inertial motion is known as momentum. It is the vector sum of the products of its masses and velocities, or the product of its mass and velocity.
Momentum has both a magnitude and a direction because it is a vector quantity.
The SI unit for momentum is kgm/s or N/s since it is the result of mass and velocity.
Learn more about momentum here
https://brainly.com/question/30677308
#SPJ11
match the crater type. _____________ are structures usually over 300 km in diameter, which tend to have very flat floors, and concentric rings of uplifted mountains are certainly possible.
Impact craters are structures usually over 300 km in diameter, which tend to have very flat floors, and concentric rings of uplifted mountains are certainly possible.
What are impact craters?Impact craters are circular depressions or holes on the surface of a planet, moon, or other solid body in space, caused by the impact of a meteoroid or asteroid.
They are the most common geological features on rocky planets and moons and provide important information about the geological history of these bodies.
Impact craters are formed when a meteorite or other celestial body collides with a planet or moon.
More on impact craters can be found here: https://brainly.com/question/9629316
#SPJ1
Compared with the mass of an apple on Earth, the mass of the same apple on the Moon is :______
a) more. b) less. c) same. d) double. e) half.
c) same.
The mass of an object, such as an apple, does not change depending on its location. The mass of an apple on Earth will be the same as the mass of the same apple on the Moon. However, the weight of the apple would be different due to the difference in gravitational force between Earth and the Moon.
To know more about force visit:https://brainly.com/question/13191643
#SPJ11
Once a parachutist has reached terminal velocity, the net force (equaling gravity down [negative] plus air resistance up [positive]) acting on her is ...
Once a parachutist has reached terminal velocity, the net force (equaling gravity down [negative] plus air resistance up [positive]) acting on her is The net force acting on the parachutist at terminal velocity is zero.
Terminal velocity is the constant speed that a freely falling object eventually reaches when the resistance of the medium (air in this case) prevents further acceleration. At this point, the force of gravity pulling the parachutist down (negative) is equal to the force of air resistance pushing up against her (positive). As these forces are equal and opposite, they cancel each other out, resulting in a net force of zero. This means that the parachutist will continue to fall at a constant speed without accelerating.
learn more about terminal velocity
https://brainly.com/question/30466634
#SPJ11
A pumpkin pie in a 8.50 in diameter plate is placed upon a rotating tray. Then, the tray is rotated such that the rim of the pie plate moves through a distance of 158 in. Express the angular distance that the pie plate has moved through in revolutions, radians, and degrees.
The angular distance that the pie plate has moved through is approximately:- 5.91 revolutions- 37.18 radians- 2129 degrees
The circumference of the pie plate can be calculated as:
C = πd = π(8.5 in) ≈ 26.7 in
To find the angular distance that the pie plate has moved through, we need to know the fraction of a complete revolution that corresponds to a linear distance of 158 in on the circumference of the pie plate. We can use the formula:
θ = s / r
where:
θ = angular distance in radians
s = linear distance
r = radius
The radius of the pie plate is half of the diameter, or:
r = 8.5 in / 2 = 4.25 in
Using this radius and the given linear distance, we get:
θ = s / r = 158 in / 4.25 in ≈ 37.18 radians
To convert radians to revolutions, we can use the fact that 1 revolution is equivalent to 2π radians:
θ = 37.18 radians = 37.18 / (2π) revolutions ≈ 5.91 revolutions
To convert radians to degrees, we can use the fact that 180 degrees is equivalent to π radians:
θ = 37.18 radians = (37.18 radians) * (180 degrees / π radians) ≈ 2129 degrees.
Learn more about angular distance here:
https://brainly.com/question/13275279
#SPJ11
A woman uses a pulley and a rope to raise a 20 kg weight to a height of 2 m. If it takes 4 s to do this about how much power is she supplying
The woman is supplying about 98.1 W of power.
The work done by the woman to raise the weight is given by:
Work = Force x Distance x cosθ
where Force is the force exerted on the rope, Distance is the vertical distance moved by the weight, and θ is the angle between the rope and the vertical.
Since the weight is being raised at a constant speed, the force exerted on the rope is equal in magnitude to the weight of the object:
Force = Weight x g = 20 kg x 9.81 m/s^2 = 196.2 N
Distance = 2 m
θ = 0 (since the rope is vertical)
Therefore, the work done by the woman is:
Work = 196.2 N x 2 m x cos(0) = 392.4 J
The power supplied by the woman is the work done divided by the time taken:
Power = Work / Time = 392.4 J / 4 s = 98.1 W
Know more about power here:
https://brainly.com/question/29575208
#SPJ11
A 245-kg object and a 545-kg object are separated by 5.00 m. (a) Find the magnitude of the net gravitational force exerted by these objects on a 32.0-kg object placed midway between them.
The magnitude of the net gravitational force exerted by the 245-kg and 545-kg objects on a 32.0-kg object placed midway between them is 0.158 N.
To find the magnitude of the net gravitational force exerted by the 245-kg and 545-kg objects on a 32.0-kg object placed midway between them, we can use the formula:
F = G(m₁m₂)/r²
where F is the gravitational force, G is the gravitational constant (6.67 x 10⁻¹¹ N*m²/kg²), m₁ and m₂ are the masses of the two objects, and r is the distance between them.
First, we need to find the distance between the 32.0-kg object and each of the other two objects.
Since the 32.0-kg object is placed midway between them, the distance to each object is 2.50 m.
Next, we can calculate the gravitational force between the 32.0-kg object and each of the other two objects using the formula above.
For the 245-kg object:
F₁ = G(m₁m₂)/r²
= (6.67 x 10⁻¹¹ N*m²/kg²) * (32.0 kg * 245.0 kg) / (2.50 m)²
= 0.129 N
And for the 545-kg object:
F₂ = G(m₁m₂)/r²
= (6.67 x 10⁻¹¹ N*m²/kg²) * (32.0 kg * 545.0 kg) / (2.50 m)²
= 0.287 N
Since the two gravitational forces are in opposite directions, we need to subtract them to find the net gravitational force:
F(net) = F₂ - F₁
= 0.287 N - 0.129 N
= 0.158 N
Learn more about gravitational force:
https://brainly.com/question/72250
#SPJ11
The mass of an electric car is 900 kg including the passengers. A single motor mounted on the front wheels drives the car, and the radius of the wheel is 0.3 m. The car is going downhill at a speed of 50 km/hr, and the slope of the hill is 30 degree. The friction coefficient of the road surface at a given weather condition is 0.5. Ignore the motor losses and compute the power generated by the electric machine
The electric motor produces around 10.4 kW of power.
the following example: (900 kg x 9.81 m/s2 x sin(30) = 4414.5 N) The force operating on the car as it descends the slope is equal to the weight of the car multiplied by the sine of the slope angle. The friction force is calculated as follows: (900 kg x 9.81 m/s2 x 0.5) = 4414.5 N. The friction force is generated by the car's weight multiplied by the friction coefficient. As a result, there is no acceleration and there is no net force acting on the car. The frictional force times the vehicle's speed, or (4414.5 N) x (50 km/hr x 1000 m/km / 3600 s/hr), equals the power produced by the motor, or 10.4 kW.
learn more about electric motor here:
https://brainly.com/question/20317436
#SPJ11
Find the direction of the magnetic field that the electron produces at the location of the nucleus (treated as a point).
The direction of the magnetic field that the electron produces at the location of the nucleus depends on the direction of the electron's velocity vector.
To find the direction of the magnetic field produced by an electron a, we can use the right-hand rule.
First, we determine the direction of the electron's velocity vector. If the electron is moving towards the nucleus, the velocity vector points towards the nucleus. If the electron is moving away from the nucleus, the velocity vector points away from the nucleus.
Next, we curl our right hand fingers in the direction of the electron's velocity vector.
Thus, this represents the direction of the magnetic field lines produced by the electron.
To know more about magnetic field refer here:
https://brainly.com/question/14848188
#SPJ11
The resistanceless inductor is connected across the ac source whose voltage amplitude is 26.5 V and angular frequency is 1300 rad/s . Find the current amplitude if the self-inductance of the inductor is
The current amplitude is 0.02038j A / (rad/s * L) in a circuit with a resistanceless inductor connected across an AC source with a voltage amplitude of 26.5 V and an angular frequency of 1300 rad/s.
To find the current amplitude in an AC circuit with a resistanceless inductor, we can use Ohm's law and the relationship between voltage, current, and inductance in an inductor.
Ohm's law states that the current (I) in a circuit is equal to the voltage (V) divided by the impedance (Z). In the case of an inductor, the impedance is given by the formula:
Z = jωL
Where:
Z is the impedance
j is the imaginary unit (√(-1))
ω is the angular frequency
L is the self-inductance of the inductor
Given that the voltage amplitude (V_amplitude) is 26.5 V and the angular frequency (ω) is 1300 rad/s, we need to find the current amplitude (I_amplitude).
First, we can calculate the impedance:
Z = jωL
Substituting the given values:
Z = j * 1300 rad/s * L
Now, we can use Ohm's law to find the current amplitude:
I_amplitude = V_amplitude / Z
Substituting the values:
I_amplitude = 26.5 V / (j * 1300 rad/s * L)
To simplify this expression, we can multiply the numerator and denominator by the conjugate of the denominator, which is -j:
I_amplitude = 26.5 V * (-j) / (j * -j * 1300 rad/s * L)
Simplifying further:
I_amplitude = -26.5j V / (-1300 rad/s * L)
I_amplitude = 0.02038j V / (rad/s * L)
Therefore, the current amplitude is 0.02038j A / (rad/s * L) in a circuit with a with a voltage amplitude of 26.5 V and an angular frequency of 1300 rad/s.
To learn more about current, refer below:
https://brainly.com/question/31657860
#SPJ11
A hockey puck (mass = 4 kg) leaves the players stick with a speed of 15 m/s and slides on the ice for 70 meters before coming to rest. What is the magnitude of the acceleration on the puck? m/s^2 What is the friction force exerted on the puck due to the ice? N What is the normal force on the puck? N What is the friction coefficient between the puck and the ice? (unitless)
The solve for the magnitude of the acceleration on the puck, we can use the formula v^2 = u^2 + 2as where v is the final velocity (which is zero since the puck comes to rest) a = (v^2 - u^2)/2s a = (0^2 - 15^2)/ (2 x 70) a = -3.06 m/s^2 Since the acceleration is negative, this means the puck is slowing down.
The find the friction force exerted on the puck due to the ice, we can use the formula f = Un where f is the friction force, u is the coefficient of friction, and N is the normal force (which we need to find). To find the normal force, we can use the formula N = mg where m is the mass of the puck (4 kg), and g is the acceleration due to gravity
(9.8 m/s^2). N = 4 x 9.8 N = 39.2 N
Now we can substitute the normal force and coefficient of friction into the formula for friction force.
f = Un f = u x 39.2
To find the coefficient of friction, we need to know the type of ice the puck is sliding on. For example, fresh ice has a lower coefficient of friction than rough ice. Without this information, we cannot determine the coefficient of friction. In summary, the magnitude of the acceleration on the puck is.
-3.06 m/s^2.
The normal force on the puck is 39.2 N. We cannot determine the friction force or coefficient of friction without additional information about the ice.
learn more about puck here.
https://brainly.com/question/13782483
#SPJ11
Three 5 M resistors are linked in series. If a 6.0 V battery is attached, what will be the current through the circuit?
The current flowing through the circuit is 0.4 µA
The current through the circuit can be calculated using Ohm's Law, which states that the current (I) is equal to the voltage (V) divided by the resistance (R). In a series circuit, the resistances add up, so the total resistance is equal to the sum of the individual resistances.
Using this formula, we can find the current (I) in the circuit:
Total resistance (R) = R1 + R2 + R3 = 5 MΩ + 5 MΩ + 5 MΩ = 15 MΩ
Voltage (V) = 6.0 V
Current (I) = V / R = 6.0 V / 15 MΩ = 0.4 µA
Therefore, the current through the circuit is 0.4 µA.
To learn more about current, here
https://brainly.com/question/23862724
#SPJ1
What photon wavelength will cause an electron to be emitted from a metal surface with kinetic energy 50 eV
A photon with a wavelength of approximately 203 nm can cause an electron to be emitted from a metal surface with a kinetic energy of 50 eV, assuming the metal has a work function of 4 eV.
hν = [tex]E_k[/tex] + φ
[tex]E_k[/tex] = 50 eV x (1.602 x [tex]10^{-19[/tex]J/eV) = 8.01 x [tex]10^{-18[/tex] J
Assuming the metal has a work function of 4 eV (typical for many metals), we can rearrange the equation to solve for the frequency of the photon:
ν = ([tex]E_k[/tex] + φ) / h
ν = (8.01 x [tex]10^{-18[/tex] J + 4 eV x (1.602 x [tex]10^{-19} J[/tex]/eV)) / 6.626 x [tex]10^{-34}[/tex]J.s
ν = 1.47 x [tex]10^{15[/tex] Hz
The wavelength of the photon can be calculated using the formula:
λ = c / ν
where c is the speed of light (3.00 x [tex]10^8[/tex] m/s):
λ = 3.00 x [tex]10^8[/tex] m/s / 1.47 x [tex]10^{15[/tex]Hz
λ ≈ 203 nm (nanometers)
Wavelength is the distance between two consecutive peaks or troughs in a wave. It is typically denoted by the Greek letter lambda (λ) and is measured in units of length, such as meters (m) or nanometers (nm). Wavelength is an important characteristic of all types of waves, including light waves, sound waves, and electromagnetic waves.
The wavelength of a wave is determined by its frequency and speed. Higher-frequency waves have shorter wavelengths, while lower-frequency waves have longer wavelengths. Similarly, waves traveling at higher speeds have longer wavelengths, while waves traveling at lower speeds have shorter wavelengths. The concept of wavelength is fundamental to many areas of physics, including optics, quantum mechanics, and electromagnetism.
To learn more about Wavelength visit here:
brainly.com/question/4112024
#SPJ4