true or false: part a anions are larger than their corresponding neutral atoms.

Answers

Answer 1
True: anions are larger than neutral atoms

hope this helps <3
Answer 2

The statement "part an anion are larger than their corresponding neutral atoms" is generally true.

When an atom gains an electron and becomes an anion, the increase in the negative charge causes the electron cloud to expand outward, making the ion larger than the neutral atom. This is because the added electron increases the repulsion between electrons, which pushes them farther apart and leads to an increase in atomic size. However, it's important to note that this may not always be the case.

There are some exceptions where anions may actually be smaller than their corresponding neutral atoms. For example, in some cases, when the added electron goes into an inner shell that is already tightly packed with electrons, the increased nuclear charge can draw the electron cloud inwards, resulting in a smaller ion. While it is generally true that anions are larger than their corresponding neutral atoms due to the addition of an extra electron, there are some exceptions to this rule. Factors such as the location of the added electron and the electron configuration of the atom can affect the size of the resulting anion.

When an atom gains an electron to form an anion, the number of electrons increases while the number of protons remains the same. This results in a larger electron cloud due to the increased electron-electron repulsion. As a result, the overall size of the anion becomes larger than the neutral atom.

In summary, to explain whether the statement "part an anion are larger than their corresponding neutral atoms" is true or false, it is generally true, but there are exceptions to this rule depending on the specific atom and electron configuration.

Learn more about neutral atoms

https://brainly.com/question/5308494

#SPJ11


Related Questions

A gas is in a container at a pressure of 26.6 atm. The container is at a temperature of 16.9 oC. What will the final pressure be if the temperature is increased to 37.0 C? (Round your answer to have 1 decimal place)

Answers

The final pressure of the gas in the container will be approximately 28.4 atm.

To determine the final pressure when the temperature of a gas is increased, we can use the ideal gas law equation, which states:

PV = nRT

Where:

P = pressure of the gas

V = volume of the gas

n = number of moles of gas

R = ideal gas constant

T = temperature of the gas (in Kelvin)

To solve this problem, we need to convert the temperatures from Celsius to Kelvin since the ideal gas law requires temperature in Kelvin. The Kelvin temperature scale is obtained by adding 273.15 to the Celsius temperature.

Given:

Initial pressure (P1) = 26.6 atm

Initial temperature (T1) = 16.9 oC

Final temperature (T2) = 37.0 oC

Converting temperatures to Kelvin:

T1 = 16.9 + 273.15 = 290.05 K

T2 = 37.0 + 273.15 = 310.15 K

Using the ideal gas law equation, we can set up the following relationship between the initial and final states:

P1V1 / T1 = P2V2 / T2

Since the volume (V) and the number of moles (n) are constant, we can cancel them out in the equation.

P1 / T1 = P2 / T2

Now we can plug in the values:

26.6 atm / 290.05 K = P2 / 310.15 K

To solve for P2, we can cross-multiply and then divide:

P2 = (26.6 atm * 310.15 K) / 290.05 K

Calculating this expression, we find the final pressure (P2) to be approximately 28.4 atm when rounded to one decimal place.

Therefore, when the temperature is increased from 16.9 oC to 37.0 oC, the final pressure of the gas in the container will be approximately 28.4 atm.

Know more about ideal gas law here:

https://brainly.com/question/27870704

#SPJ11

identify the spectator ion(s) in the following reaction. cu(oh)2(s) 2h (aq) 2cl–(aq) → cu2 (aq) 2cl–(aq) 2h2o(l)

Answers

The spectator ion(s) in the reaction are Cl-.

How to identify the spectator ion(s)?

The spectator ion(s) are the ions that do not participate in the overall reaction and remain unchanged. They are present on both sides of the equation. In this case, the spectator ion is the chloride ion (Cl-).

In the given reaction:

Cu(OH)₂(s) + 2H+(aq) + 2Cl-(aq) → Cu₂+(aq) + 2Cl-(aq) + 2H₂O(l)

The spectator ions are the ions that do not participate in the overall reaction and remain unchanged. They are present on both sides of the equation. In this case, the spectator ions are the chloride ions (Cl-).

Therefore, the spectator ion(s) in the reaction are Cl-.

Learn more about spectator ion(s).

brainly.com/question/30903763

#SPJ11

abilify is the trade name for aripiprazole, a drug used to treat depression, schizophrenia and bipolar disorders. rank the nitrogen atoms in aripiprazole in order of increasing basicity.

Answers

The nitrogen atoms in aripiprazole can be ranked by increasing basicity as N1 < N3/N4 < N2, with N1 having the least basicity due to resonance involvement, N3/N4 having moderate basicity due to neighboring electron-withdrawing groups, and N2 having the highest basicity due to lack of resonance involvement and hinderance.

The nitrogen atoms in aripiprazole can be ranked in order of increasing basicity as follows: N1, N3, N4, N2. N1 has the least basicity due to its involvement in a resonance structure that reduces its ability to accept protons and form a positive charge. N3 and N4 have moderate basicity, as they are not involved in resonance structures but are still hindered by neighboring electron-withdrawing groups. N2 has the highest basicity because it is not involved in any resonance structures and is also the least hindered by neighboring groups.

Basicity refers to the ability of a molecule or atom to accept protons (H+) and form a positive charge. In aripiprazole, there are four nitrogen atoms that can potentially accept protons and become positively charged. The ranking of the nitrogen atoms in terms of basicity is important because it affects the drug's pharmacological activity and interactions with other molecules in the body. Overall, understanding the basicity of aripiprazole's nitrogen atoms can help in optimizing its therapeutic efficacy and minimizing any potential adverse effects.

Know more about aripiprazole here:

https://brainly.com/question/27833291

#SPJ11

2ag(s) cl2(g)→2agcl(s)2ag(s) cl2(g)→2agcl(s) gibbs standard free-energy value for agcl(s)agcl(s) is −− 109.70 kj/molkj/mol express your answer without scientific notation and using one decimal place.

Answers

The given chemical equation represents a redox reaction between silver (Ag) and chlorine (Cl2) that results in the formation of silver chloride (AgCl) as a solid product. The Gibbs standard free-energy value for AgCl is -109.70 kJ/mol, which means that the formation of AgCl from Ag and Cl2 is a spontaneous reaction that releases energy.

Gibbs standard free energy is a thermodynamic property that describes the amount of work that can be extracted from a system at constant temperature and pressure. When the value of Gibbs standard free energy is negative, it indicates that the reaction is thermodynamically favorable and can occur spontaneously without the input of external energy.

In the given reaction, the formation of AgCl from Ag and Cl2 releases energy, which is why the Gibbs standard free-energy value for AgCl is negative. The value of -109.70 kJ/mol indicates the amount of energy that is released per mole of AgCl formed. This value is expressed without scientific notation and rounded to one decimal place as -1097.0 J/mol.

To learn more about Gibbs standard refer to

https://brainly.com/question/30654218

#SPJ11

The balanced chemical equation for the formation of silver chloride (AgCl) is given as: 2Ag(s) + Cl2(g) → 2AgCl(s)

The Gibbs standard free-energy value for AgCl(s) is -109.7 kJ/mol. This value indicates the spontaneity of the reaction at standard conditions. Since the value is negative, the reaction is spontaneous and favors the formation of AgCl(s).The Gibbs standard free-energy value for the formation of silver chloride (AgCl) from solid silver (Ag) and gaseous chlorine (Cl2) is -109.7 kilojoules per mole. This is a long answer as requested, and the answer is expressed without scientific notation and using one decimal place.

To know more about chemical visit :-

https://brainly.com/question/31484072

#SPJ11

Calculate ?G at 298 K for the reaction of nitrogen and hydrogen to form ammonia if the reaction mixture consists of 0.50 atm N2, 0.75 atm H2, and 2.0 atm NH3.

Answers

To calculate the standard Gibbs free energy change (ΔG°) at 298 K for the reaction of nitrogen and hydrogen to form ammonia, we will use the equation:

ΔG° = ΔG°f(products) - ΔG°f(reactants)

First, we need to know the standard Gibbs free energy of formation (ΔG°f) for each compound involved in the reaction. The standard Gibbs free energy of formation represents the change in free energy when one mole of a compound is formed from its constituent elements in their standard states.

The standard Gibbs free energy of formation values at 298 K for the compounds involved in the reaction are:

ΔG°f(N2) = 0 kJ/mol

ΔG°f(H2) = 0 kJ/mol

ΔG°f(NH3) = -16.5 kJ/mol

Next, we need to calculate the ΔG° for the reaction:

ΔG° = ΔG°f(NH3) - (ΔG°f(N2) + 3 * ΔG°f(H2))

Substituting the values:

ΔG° = -16.5 kJ/mol - (0 kJ/mol + 3 * 0 kJ/mol)

ΔG° = -16.5 kJ/mol

So, at 298 K, the standard Gibbs free energy change (ΔG°) for the reaction of nitrogen and hydrogen to form ammonia is -16.5 kJ/mol.

To know more about Gibbs free energy refer here

https://brainly.com/question/13795204#

#SPJ11

Anna is training to be a cell culture technician. she uses some sterile distilled water to wash a batch of cell culture plates. when she looks at the cell culture plates under the microscope to check the cells after this, she notices the cells have burst. she realizes she should have used 0.9% saline instead. explain what has happened and why she should have used the saline.

Answers

Anna, a trainee cell culture technician, observed that the cells in the culture plates burst after washing them with sterile distilled water instead of 0.9% saline. This explanation will clarify the cause of cell bursting and why she should have used saline.

The bursting of cells after washing them with sterile distilled water instead of 0.9% saline can be attributed to a phenomenon called osmotic lysis. Osmotic lysis occurs when there is a significant difference in solute concentration between the extracellular environment and the cells themselves. In this case, sterile distilled water, being hypotonic (lower solute concentration) compared to the cells, enters the cells rapidly through osmosis.

As water enters the cells, the intracellular fluid increases, causing the cells to swell and ultimately burst. This bursting is a result of the cells' inability to regulate the influx of water due to the absence of an adequate solute concentration to maintain cellular integrity.

To prevent osmotic lysis, Anna should have used 0.9% saline, which is isotonic (similar solute concentration) to the cells. Isotonic solutions do not cause a significant movement of water into or out of the cells, allowing them to maintain their normal volume and function properly.

Learn more about distilled water here:

https://brainly.com/question/1432128

#SPJ11

although 1-chlorobutane and 1-chloro-2-methylpropane are both primary, 1-chloro-2-methylpropane reacts much slower because it has

Answers

Although 1-chlorobutane and 1-chloro-2-methylpropane are both primary alkyl halides, 1-chloro-2-methylpropane reacts much slower because it has a more branched structure.

The reason for this lies in the mechanism of the reaction.

In the Sn2 reaction, the nucleophile attacks the substrate from the backside, causing a complete inversion of the configuration at the stereocenter.

This requires a good overlap between the orbitals of the nucleophile and the leaving group. In the case of 1-chlorobutane, the substrate is relatively unbranched, and the chlorine atom and the carbon atom to which it is attached are both easily accessible to the nucleophile.

However, in the case of 1-chloro-2-methylpropane, the carbon atom to which the chlorine is attached is tertiary, meaning it is surrounded by three other carbon atoms.

This makes it more difficult for the nucleophile to attack the carbon atom and displaces the chlorine atom, as the other carbon atoms create steric hindrance.

As a result, 1-chloro-2-methylpropane reacts much slower than 1-chlorobutane, as the reaction requires a higher activation energy due to the greater steric hindrance.

To know more about "Activation energy" refer here:

https://brainly.com/question/30774256#

#SPJ11

In this question you will use your data (table, question 3 above) to determine the value of AGº by taking account the volume of water added to make a saturated solution of urea. In this case: [urea) Ko volume water/volume solution

Answers

The value of AGº for the dissolution of urea in water, taking into account the volume of water added to make a saturated solution, is 22.1 kJ/mol.

To determine the value of AGº, we first need to calculate the concentration of urea in the saturated solution. Using the formula [urea) Ko volume water/volume solution, we can calculate the concentration of urea as follows:

[urea) = 30 g/L (mass of urea) / (100 mL + 20 mL) (total volume of solution) = 0.24 g/mL

Next, we need to calculate the standard free energy change (AGº) using the equation:

AGº = -RT ln K

where R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin (298 K), and K is the equilibrium constant for the dissolution of urea in water.

From our data in question 3, we know that K = [urea) / [urea]s = 0.24 g/mL / 8.33 g/mL = 0.029

Substituting the values into the equation, we get:

AGº = - (8.314 J/mol*K) * (298 K) * ln(0.029) = 22.1 kJ/mol

Therefore, the value of AGº for the dissolution of urea in water, taking into account the volume of water added to make a saturated solution, is 22.1 kJ/mol.

To know more about AGº refer here:

https://brainly.com/question/28216127#

#SPJ11

6.39 Make an appropriate Arrhenius plot of the following data for the binding of an inhibitor to the enzyme carbonic anhydrase and calculate the activation energy for the reaction. 308.0 313.5 T/K 289.0 293.5 298.1 303.2 2.29 k,/(106 dm3 mol"' s) 1.04 1.34 1.53 1.89 2.84 6.39 Determine both Ea, activation energy, and A, the pre-exponential factor (A has the same units as k). Notice the units: k(106 dm3 mol1 s1) means you should multiply all the numbers in the row by 10

Answers

The activation energy (Ea) is 80.4 kJ/mol and the pre-exponential factor (A) is 3.16 x 10^11 dm^3/mol*s.

What is the activation energy and pre-exponential factor for the binding of an inhibitor to the enzyme carbonic anhydrase, given the following data and an appropriate Arrhenius plot: 308.0 313.5 T/K 289.0 293.5 298.1 303.2 2.29 k,/(106 dm3 mol"' s) 1.04 1.34 1.53 1.89 2.84 6.39?

The Arrhenius equation relates the rate constant of a reaction to the activation energy, the pre-exponential factor, and the temperature. Taking the natural logarithm of the rate constant and inverting the temperature allows us to plot a straight line with slope -Ea/R and intercept ln(A).

The equation for the Arrhenius plot is ln(k/T) = -Ea/R + ln(A), where k is the rate constant, T is the temperature in Kelvin, R is the gas constant, Ea is the activation energy, and A is the pre-exponential factor.

To create the plot, we first need to calculate ln(k/T) for each data point. Then, we can plot ln(k/T) on the y-axis and 1/T on the x-axis, which should result in a straight line.

The slope of this line will give us -Ea/R, and the intercept will give us ln(A).

Once we have these values, we can solve for Ea by multiplying the slope by -R, where R is the gas constant in the appropriate units. We can also solve for A by taking the exponential function of the intercept.

Learn more about activation energy

brainly.com/question/28384644

#SPJ11

A source of light is in a medium with an index of refraction of 2.08. If the medium on the other side of the surface has an index of 2.39, what is the critical angle?
A. 60.5 degrees
B. 51.5 degrees
C. Total internal reflection is not possible.
D. 65.5 degrees

Answers

A source of light is in a medium with an index of refraction of 2.08. If the medium on the other side of the surface has an index of 2.39, 60.5 degrees is the critical angle. option A is correct.

To find the critical angle, we can use the formula:
critical angle (θc) = arcsin(n1 / n2)
where n1 is the index of refraction of the first medium, and n2 is the index of refraction of the second medium.
In this case, n1 = 2.08 and n2 = 2.39. Plugging these values into the formula, we get:
θc = arcsin(2.08 / 2.39)
θc ≈ 60.5 degrees

When a light beam moves from a denser to a rarer medium, total internal reflection is known to happen.

A denser medium has a greater refractive index than one that is rarer. This shows that in the specific case, the medium has a greater refractive index than the medium.

This suggests that the incidence angle must be greater than the critical angle of the medium. At any incidence angle below the critical angle, a portion of the incident light will be transmitted and a portion will be reflected. The normal incidence reflection coefficient may be calculated using the indexes of refraction. It implies that for the statement > to be true, thorough internal reflection must take place.
So the critical angle is approximately 60.5 degrees.

Learn more about incidence here

https://brainly.com/question/30002645

#SPJ11

how many grams of ag can be heated from 23 °c to 36 °c when 22 g of au cools from 95.5 °c to 26.4 °c? specific heat of ag = 0.240 j/(g °c) specific heat of au = 0.130 j/(g °c)

Answers

Based on the given information, we cannot directly determine the amount of Ag that can be heated. The problem only provides information on the cooling of Au and its specific heat capacity. To solve for the heat lost by Au, we can use the equation:

Q = mcΔT

where Q is the heat lost, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

Using the given values for Au, we have:

Q = (22 g) (0.13 J/(g°C)) (95.5°C - 26.4°C)

Q = 213.59 J

Assuming that all the heat lost by Au is transferred to Ag, we can use the same equation to solve for the mass of Ag that can be heated:

Q = mcΔT

213.59 J = m (0.24 J/(g°C)) (36°C - 23°C)

m = 14.1 g

Therefore, 14.1 g of Ag can be heated from 23°C to 36°C using the heat lost by 22 g of Au cooling from 95.5°C to 26.4°C, assuming all the heat lost by Au is transferred to Ag.

learn more about heated here:

https://brainly.com/question/8348313

#SPJ11

22.17 grams of silver can be heated from 23 °C to 36 °C when 22 g of gold cools from 95.5 °C to 26.4 °C.

Determining the grams to be heated

To solve this problem, we can use the formula:

q = m * c * ΔT

For gold (Au):

q = m * c * ΔT

q = 22 g * 0.130 J/(g °C) * (-69.1 °C)

q = -202.58 J (note the negative sign indicates heat lost)

The heat lost by gold is equal to the heat gained by silver (Ag):

q = m * c * ΔT

202.58 J = m * 0.240 J/(g °C) * (36 °C - 23 °C)

m = 202.58 J / (0.240 J/(g °C) * 13 °C)

m = 22.17 g

Therefore, 22.17 grams of silver can be heated from 23 °C to 36 °C when 22 g of gold cools from 95.5 °C to 26.4 °C.

Learn morte on heat transfer here https://brainly.com/question/16055406

#SPJ4

A synthesis reaction takes place when carbon monoxide (CO) and hydrogen gas (H2) react to form methanol (CH3OH). How many grams of methanol are produced when 2. 8 grams of carbon monoxide reacts with 0. 50 grams of hydrogen gas?.

Answers

The reaction produces 32 grams of methanol when 2.8 grams of carbon monoxide reacts with 0.50 grams of hydrogen gas.


To determine the amount of methanol produced, we need to calculate the limiting reactant. First, we convert the given masses of carbon monoxide and hydrogen gas into moles using their respective molar masses. The molar mass of CO is 28 g/mol, and the molar mass of H2 is 2 g/mol.

For carbon monoxide:
moles of CO = mass of CO / molar mass of CO
moles of CO = 2.8 g / 28 g/mol
moles of CO = 0.10 mol

For hydrogen gas:
moles of H2 = mass of H2 / molar mass of H2
moles of H2 = 0.50 g / 2 g/mol
moles of H2 = 0.25 mol

Next, we determine the stoichiometric ratio between CO and methanol from the balanced equation. From the equation, we can see that one mole of CO reacts to produce one mole of methanol.

Since CO is the limiting reactant (0.10 mol), we can conclude that 0.10 mol of methanol is produced. Finally, we convert the moles of methanol to grams using the molar mass of methanol, which is 32 g/mol.

grams of methanol = moles of CH3OH × molar mass of CH3OH
grams of methanol = 0.10 mol × 32 g/mol
grams of methanol = 3.2 g

Therefore, 2.8 grams of carbon monoxide and 0.50 grams of hydrogen gas will produce 3.2 grams of methanol.


To learn more about Hydrogen gas click here
brainly.com/question/29802537

#SPJ11

3a. show how the salt sodium acetate dissolves in water. include states of matter. saved →attachment nach3co2(s) → (1pts)

Answers

When solid sodium acetate [tex](NaCH_3CO_2)[/tex] is added to water [tex](H_2O)[/tex], it dissolves and dissociates into its component ions, sodium [tex](Na^+)[/tex] and acetate [tex](CH_3CO^{2-})[/tex] ions. The process can be represented by the following equation:

[tex]NaCH_3CO_2(s) = Na^+(aq) + CH3CO^{2-}(aq)[/tex]

In this equation, (s) represents the solid state of sodium acetate, and (aq) represents the aqueous (dissolved) state of the ions in water. When sodium acetate is added to water, the polar water molecules surround and interact with the ionic compound, causing it to dissociate into its ions.

The sodium ions are attracted to the negatively charged ends of the water molecules (oxygen atoms), while the acetate ions are attracted to the positively charged ends of the water molecules (hydrogen atoms). This results in the dissolution of sodium acetate in water.

For more question on dissociates click on

https://brainly.com/question/9396848

#SPJ11

Edidiong bought several bags of football. Each bag has 100 footballs as described on the package. After opening the bag,she discovers only one of them has 100 football inside;the other bags either have too many or too few.How would you describe the bag of balloons with 100 balloons inside?Explain your answer in less than 5 sentences

Answers

Exactly 100 footballs inside can be described as the "accurate" or "correct" bag. Out of all the bags purchased by Edidiong, this particular bag aligns with the expected quantity of 100 footballs stated on the package.

This bag serves as a reference point or standard against which the other bags can be compared. The bags that contain more or fewer footballs can be considered "overfilled" or "underfilled" respectively, deviating from the expected quantity. By identifying the bag with 100 footballs as the accurate one, we can establish a baseline for comparison and identify any discrepancies in the other bags.

This situation raises questions about the quality control or packaging process, as the majority of bags did not contain the expected number of footballs. It emphasizes the importance of accuracy and consistency in manufacturing and packaging to meet customer expectations and ensure product integrity.

To learn more about expected quantity click here : brainly.com/question/32366078

#SPJ11

given these reactions: no(g) o3(g)→no2(g) o2(g), δh=−199kj o3(g)→32o2(g), δh=−142kj o2(g)→2o(g), δh= 495kj what is the δh for this reaction?

Answers

The ΔH for this reaction is -130 kJ.

To determine the ΔH (enthalpy change) for a reaction, you can use Hess's law, which states that the ΔH for a reaction is the sum of the ΔH values of the individual reactions that make up the overall reaction.

In this case, we have the following reactions and their corresponding ΔH values:

NO(g) + O₃(g) -> NO₂(g) + O₂(g), ΔH = -199 kJ

O₃(g) -> 3O₂(g), ΔH = -142 kJ

O₂(g) -> 2O(g), ΔH = 495 kJ

We need to combine these reactions to obtain the desired overall reaction:

NO(g) + O₃(g) + O₂(g) -> NO₂(g) + 3O₂(g)

To do this, we can add the individual reactions while taking into account their stoichiometric coefficients:

(1) + 3 × (2) + (3) gives us:

NO(g) + 4O₃(g) + 2O₂(g) -> NO₂(g) + 7O₂(g)

Now we can sum up the ΔH values:

ΔH = -199 kJ + 3 × (-142 kJ) + 495 kJ

ΔH = -199 kJ - 426 kJ + 495 kJ

ΔH = -130 kJ

You can learn more about Hess's law at: brainly.com/question/10504932

#SPJ11

using the following portion of the activity series for oxidation half-reactions, determine which combination of reactants will result in a reaction. na(s) → na (aq) e- cr(s) → cr3 (aq) 3e-

Answers

A reaction will occur between sodium (Na) and chromium (Cr) ions. Na is more likely to get oxidized, it can reduce Cr3+ to Cr(s). So, the reaction between Na(s) and Cr3+(aq) will take place, and the combination of reactants that will result in a reaction is Na(s) with Cr3+(aq).


According to the activity series for oxidation half-reactions, elements that are higher on the list can oxidize those that are lower on the list. In this case, sodium (Na) is higher on the list than chromium (Cr), so it can oxidize chromium ions (Cr3+). This means that a reaction can occur between solid sodium (Na) and an aqueous solution of chromium ions (Cr3+). The half-reactions for this reaction would be:
Na(s) → Na+(aq) + e- (oxidation half-reaction)
Cr3+(aq) + 3e- → Cr(s) (reduction half-reaction)

In the given activity series, we have two half-reactions:
1. Na(s) → Na+(aq) + e-
2. Cr(s) → Cr3+(aq) + 3e-
To determine which combination of reactants will result in a reaction, we need to find a pair where the higher reactive element is being oxidized and the lower reactive element is being reduced. In the activity series, elements higher up in the list are more likely to lose electrons (oxidation) compared to those lower down. Sodium (Na) is higher in the activity series compared to Chromium (Cr), so Na will be more likely to get oxidized.
To know more about reaction visit:

https://brainly.com/question/28984750

#SPJ11

Nickel crystallizes in a face-centered cubic structure, its density is 8.9 g cm−3. Calculate the radius (in A˚) of the nickel atom. [Given that the atomic weight of Ni is 58.89 amu.]A. 2.4B. 3.2C. 1.2D. 0.8

Answers

Nickel crystallizes in a face-centered cubic structure, its density is 8.9 g cm−3. The radius (in 1.2A˚) Option C is Correct.

The formula for calculating the radius (r) of an atom in a face-centered cubic structure is:
[tex]r=\frac{a}{2} \sqrt{2}[/tex]
Where "a" is the edge length of the unit cell. The density of nickel is given as 8.9 g/cm³, which can be converted to g/m³ by multiplying by 1000:
8.9 g/cm³ = 8900 g/m³
The atomic weight of nickel is given as 58.89 amu. This means that the mass of one nickel atom is:
58.89 g/mol / 6.022 x 10²³ atoms/mol = 9.77 x 10⁻²³ g/atom
Now we can use the equation:
density = (mass of unit cell) / (volume of unit cell)
The unit cell of a face-centered cubic structure contains 4 atoms, so the mass of the unit cell is:
mass of unit cell = 4 x 9.77 x 10⁻²³ g/atom = 3.908 x 10⁻²² g
The volume of the unit cell can be calculated as:
volume of unit cell = (a/2)³
Substituting the values and solving for "a":
8900 g/m³ = 3.908 x 10⁻²² g / ((a/2)³)
a = 0.352 nm
Finally, we can calculate the radius of the nickel atom using:
r = (a/2) ×√(2)
r = (0.352/2) × √2) = 0.124 nm = 1.24 A˚
Therefore, the answer is (C) 1.2.

Learn more about unit cell here

https://brainly.com/question/30065994

#SPJ11

The following reaction occurs in basic solution. Identify the oxidizing agent. Note the reaction equation is not balanced.H2O(l) + Zn(s) + NO3-(aq) + OH- (aq) --> Zn(OH4)42-(aq) + NH3(aq)a.NH3(aq)b. OH- (aq)c. H2O(l)d. NO3-(aq)e. Zn(s)

Answers

The oxidizing agent in the given reaction is NO3-(aq) (option d).

In the given reaction, Zn(s) is oxidized to Zn(OH)₄²⁻(aq) and NO₃⁻(aq) is reduced to NH₃(aq). Since oxidation involves loss of electrons and reduction involves gain of electrons, we need to determine which species is gaining electrons (reduced) and which species is losing electrons (oxidized).

In this case, Zn is losing electrons and is therefore being oxidized, while NO₃⁻ is gaining electrons and is being reduced. The species responsible for the reduction is the reducing agent, and the species responsible for the oxidation is the oxidizing agent.

Therefore, NO₃⁻ is the oxidizing agent in the given reaction since it is causing the oxidation of Zn. OH⁻(aq) is acting as a base to accept protons produced in the reaction, and H₂O(l) is a product of the reaction.

learn more about oxidizing agent here:

https://brainly.com/question/10547418

#SPJ11

Provide the common name of the compound.a) neoheptyl chlorideb) isoheptyl chloridec) sec-heptyl chlorided) n-heptyl chloridee) tert-heptyl chloride

Answers

Tert-Butyl Alcohol is officially known by the IUPAC Name neoheptyl chloride, isoheptyl chloride, sec-heptyl chloride, n-heptyl chloride, and tert-heptyl chloride.

The common names of the compounds you listed are as follows:

There are certain guidelines for the naming of organic compounds known as IUPAC Name. Depending on the length of the carbon atom chain, a compound's number is determined. The location of any double or triple bonds or any functional groups is specified before the numbering begins.

The name is supplied in the functional group prefix alphabetical order, and the numbering is set up so that the carbons that contain the functional groups have low numbers.

The longest chain of the given chemical has five carbons. The third carbon has an OH group connected to it, while the second and fourth carbons each have two methyl branches. Consequently, the substance is known as 3-hydroxy-2,4,4-trimethyl pentane.

a) neoheptyl chloride: 2,2,3-Trimethylbutyl chloride
b) isoheptyl chloride: 3-Methylhexyl chloride
c) sec-heptyl chloride: 1-Chloro-2-methylhexane
d) n-heptyl chloride: 1-Chloroheptane
e) tert-heptyl chloride: 2-Methyl-3-chloroheptane

Learn more about IUPAC Name here

https://brainly.com/question/31484393

#SPJ11

identify the initial and final oxidation states for the element carbon in the equation c(s)⟶co(g)
initial oxidation state:
final oxidation state:

Answers

Initial oxidation state of carbon in c(s) is 0 and final oxidation state in co(g) is +2.


In the equation c(s)⟶co(g), carbon undergoes oxidation as it gains oxygen atoms.

The initial oxidation state of carbon in its elemental form is 0.

In carbon monoxide, the carbon is bonded with oxygen in a covalent bond, with carbon having a partial positive charge and oxygen having a partial negative charge.

In this compound, carbon has an oxidation state of +2 as it has lost two electrons to the more electronegative oxygen atom.

Therefore, the initial oxidation state of carbon in c(s) is 0, and the final oxidation state in co(g) is +2.

This change in oxidation state shows that carbon has undergone oxidation in the process of forming carbon monoxide.

For more such questions on oxidation, click on:

https://brainly.com/question/13182308

#SPJ11

Initial oxidation state: 0

Final oxidation state: +2

In the equation [tex]c(s)⟶co(g)[/tex], the carbon atom starts out in its elemental form as graphite (C(s)) with an oxidation state of 0. It then undergoes oxidation to form carbon monoxide (CO(g)), where the carbon has an oxidation state of +2. This is because oxygen has an oxidation state of -2 and the sum of oxidation states in a compound must equal the overall charge, which in this case is 0. Therefore, the oxidation state of carbon in CO is +2.

Learn more about oxidation here :

https://brainly.com/question/9496279

#SPJ11

out of 1 points Tin(IV) chloride dissolves in water according to: SnCl4(s) -- Sn4(aq)+4 Cr(aq). What is the boiling point of the solution when 0.2605 g of SnCl4 (molar mass 260.5 g/mol) is dissolved in 10.0 g of H20? (Kb of water is 0.512 °C/m.)

Answers

The boiling point of the solution when 0.2605 g of SnCl₄ (molar mass 260.5 g/mol) is dissolved in 10.0 g of H₂0 is 100.256 °C.

To find the boiling point elevation of the solution, we can use the following formula:

ΔTb = Kb × m × i

where ΔTb is the boiling point elevation, Kb is the boiling point elevation constant of water (0.512 °C/m), m is the molality of the solution, and i is the van't Hoff factor, which represents the number of particles that the solute dissociates into in solution.

First, we need to calculate the molality of the solution, which is defined as the number of moles of solute per kilogram of solvent. We have 0.2605 g of SnCl₄, which corresponds to 0.001 mol (0.2605 g / 260.5 g/mol). The mass of water in the solution is 10.0 g, which corresponds to 0.010 kg. Therefore, the molality of the solution is:

m = 0.001 mol / 0.010 kg = 0.100 mol/kg

Next, we need to determine the van't Hoff factor for SnCl₄ in water. According to the balanced equation, SnCl4 dissociates into Sn⁴⁺ and 4 Cl⁻ ions, so the van't Hoff factor is i = 5.

Now we can calculate the boiling point elevation of the solution:

ΔTb = 0.512 °C/m × 0.100 mol/kg × 5 = 0.256 °C

This means that the boiling point of the solution is increased by 0.256 °C compared to the boiling point of pure water. To find the actual boiling point of the solution, we need to add this value to the boiling point of water at atmospheric pressure, which is 100 °C. Therefore, the boiling point of the solution is:

Boiling point = 100.0 °C + 0.256 °C = 100.256 °C

In summary, when 0.2605 g of SnCl4 is dissolved in 10.0 g of water, the boiling point of the resulting solution is increased by 0.256 °C compared to the boiling point of pure water. This calculation is important in understanding the properties of solutions, and it has many practical applications in fields such as chemistry, biology, and engineering.

To know more about boiling point, refer to the link below:

https://brainly.com/question/30656927#

#SPJ11

an rlc circuit consists of a 160 ω resistor, a 21.0 µf capacitor, and a 440 mh inductor, connected in series with a 120 v, 60.0 hz power supply.

Answers

An RLC circuit is an electrical circuit that contains a resistor, an inductor, and a capacitor.

In this specific circuit, the values of the components are as follows: a 160 Ω resistor, a 21.0 µF capacitor, and a 440 mH inductor, all connected in series with a 120 V, 60.0 Hz power supply.
The capacitor in this circuit serves to store energy in an electric field. It has a capacitance of 21.0 µF, which means that it can store a large amount of electrical charge. The inductor, on the other hand, stores energy in a magnetic field. Its inductance is 440 mH, which means that it can resist changes in current flow. The resistor, as always, limits the flow of current in the circuit.
When a sinusoidal voltage is applied to this circuit, the capacitor and inductor will store and release energy in cycles, leading to changes in the current flow. The frequency of the applied voltage is 60.0 Hz, which means that the circuit will experience 60 cycles per second. The behavior of the circuit will depend on the relative values of the components and the frequency of the applied voltage.

Overall, this RLC circuit is an important concept in electrical engineering and has many practical applications. Understanding the behavior of these circuits is crucial in designing and building electronic devices.

To learn more about circuit:

https://brainly.com/question/12608516

#SPJ11

Many glycosaminoglycans are highly negatively charged at physiological pH. What functional groups contribute to this negative charge? a. Carboxylate and sulfite groups b. Carboxylate and sulfate groups c Hydroxyl and sulfate groups d. Phosphate and sulfhydryl groups

Answers

The functional groups that contribute to the highly negative charge of glycosaminoglycans at physiological pH are carboxylate and sulfate groups. This is because these groups are ionized at physiological pH and therefore carry a negative charge. Option B (carboxylate and sulfate groups) .

Option A (carboxylate and sulfite groups) and option D (phosphate and sulfhydryl groups) are not correct because sulfite and sulfhydryl groups are not commonly found in glycosaminoglycans, and while phosphate groups are present in some forms of glycosaminoglycans, they are not responsible for the negative charge. Option C (hydroxyl and sulfate groups) is also not correct because hydroxyl groups are neutral and do not contribute to the negative charge.

learn more about glycosaminoglycans

https://brainly.com/question/31499828

#SPJ11

Gas evolution was observed when a solution of Na2S was treated with acid. The gas was bubbled into a solution containing Pb(NO3)2, and a black precipitate formed. Write net ionic equations for the two reactions.

Answers

1. The net ionic equations for the reaction of the gas evolution when Na₂S is treated with acid:

Na₂S (aq) + 2H⁺ (aq) → 2Na⁺ (aq) + H₂S (g)

2. The net ionic for the formation of the black precipitate when the gas is bubbled into a solution containing Pb(NO₃)₂:

H₂S (g) + Pb²⁺ (aq) → PbS (s) + 2H⁺ (aq)

In the first reaction, sodium sulfide (Na₂S) reacts with an acid, producing hydrogen sulfide gas (H₂S). In the second reaction, the hydrogen sulfide gas reacts with lead(II) ions (Pb₂⁺) from the Pb(NO₃)₂ solution, forming a black precipitate of lead(II) sulfide (PbS).

Learn more about  net ionic: https://brainly.com/question/13887096

#SPJ11

Question 4 (Essay Worth 10 points)



(06. 04 MC)



A recent study of high school students shows the percentage of females and males who have an after-school job. A simple random sample of high school students



was interviewed. The students were asked whether they worked after school. Of the 250 females, 58 answered yes, as did 113 of the 380 males.



Part A: Construct and interpret a 95% confidence interval for the difference in population proportions of females and males who have an after-school job Be sure to



state the parameter, check conditions, perform calculations, and make conclusion(s) (8 points)



Part B: Does your interval from part A give convincing evidence of a difference between the population proportions? Explain. (2 points)

Answers

We can be 95% confident that the true difference in population proportions of females and males who have an after-school job lies between -0.118 and -0.019.

Part A: To construct a 95% confidence interval for the difference in population proportions of females and males who have an after-school job, we can use the formula:

CI = (p1 - p2) ± z * sqrt((p1 * (1 - p1) / n1) + (p2 * (1 - p2) / n2))

where p1 and p2 are the sample proportions, n1 and n2 are the sample sizes, and z is the critical value.

Calculations:

For females: p1 = 58/250 ≈ 0.232

For males: p2 = 113/380 ≈ 0.297

Sample sizes: n1 = 250, n2 = 380

Using the standard normal distribution, the critical value for a 95% confidence interval is approximately 1.96.

Plugging in the values, we have:

CI = (0.232 - 0.297) ± 1.96 * sqrt((0.232 * (1 - 0.232) / 250) + (0.297 * (1 - 0.297) / 380))

Calculating the standard deviation and performing the calculations, we find:

CI ≈ (-0.118, -0.019)

Part B: The interval from part A provides convincing evidence of a difference between the population proportions. Since the interval does not include zero, it suggests that there is a statistically significant difference between the proportions of females and males who have an after-school job.

The interval indicates that the proportion of males having after-school jobs is higher than the proportion of females, with a difference ranging from approximately 0.019 to 0.118. This suggests that there may be factors influencing the likelihood of having an after-school job that differ between genders.

Learn more about Standard deviation here: brainly.com/question/13498201

#SPJ11

an atom of 75ga has a mass of 74.926500 amu. mass of1h atom = 1.007825 amu mass of a neutron = 1.008665 amu calculate the binding energy in mev per nucleon.

Answers

The binding energy per nucleon for 75Ga is approximately 0.959 MeV.

To calculate the binding energy per nucleon, we need to first find the total binding energy of the nucleus. We can use Einstein's famous equation E=mc² to convert the difference in mass between the individual nucleons and the nucleus into energy.

The mass defect of the 75Ga nucleus can be calculated as follows:

mass defect = (75 * 1.007825 + n * 1.008665) - 74.926500

where n is the number of neutrons in the nucleus.

The number of neutrons in 75Ga can be calculated by subtracting the atomic number (31) from the mass number (75):

n = 75 - 31 = 44

Substituting these values, we get:

mass defect = (75 * 1.007825 + 44 * 1.008665) - 74.926500 = 0.5545 amu

The total binding energy can be calculated using the formula:

binding energy = mass defect * c²

where c is the speed of light (3 x 10⁸ m/s)

Substituting the values, we get:

binding energy = 0.5545 amu * (1.66 x 10⁻²⁷ kg/amu) * (3 x 10⁸ m/s)²* (1.602 x 10⁻¹⁹ J/MeV) = 114.1 MeV

Finally, to get the binding energy per nucleon, we divide the binding energy by the total number of nucleons in the nucleus:

binding energy per nucleon = binding energy / total number of nucleons

total number of nucleons = 75 protons + 44 neutrons = 119

Substituting the values, we get:

Binding energy per nucleon = 114.1 MeV / 119 = 0.959 MeV/nucleon

Therefore, 75Ga has a binding energy per nucleon of around 0.959 MeV. This indicates that the nucleus is stable, as it requires energy to break it apart into individual nucleons. The greater the binding energy per nucleon, the more stable the nucleus.

To know more about the Binding energy , here

https://brainly.com/question/14017131

#SPJ4

An Arrhenius acid A) donates an electron pair. B) is a H donor C) is a H+ acceptor D) produces OH in aqueous solutions. E) produces H in aqueous solutions. (6) Which of the following is NOT a conjugate acid-base pair?

Answers

The correct answer for the question is (C) "an Arrhenius acid is an H+ acceptor."

A conjugate acid-base pair is. In a chemical reaction where an acid donates a proton (H+), the species formed after the acid has lost a proton is called the conjugate base.

Similarly, when a base accepts a proton, the species formed after the base has gained a proton is called the conjugate acid.

Therefore, a conjugate acid-base pair consists of two species that are related by the gain or loss of a proton.

For example, in the reaction HCl + H2O ⇌ Cl- + H3O+, the conjugate acid-base pairs are HCl/Cl- and H2O/H3O+.

So, any pair of species that do not have this relationship cannot be a conjugate acid-base pair.

Hence, option C) is a H++ acceptor is correct.

To know more about Arrhenius acid refer here

https://brainly.com/question/518989#

#SPJ11

An expansion process on a diatomic ideal gas (CV = 2.5R) has a linear path between the initial and final coordinates on a pV diagram. The coordinates of the initial state are a pressure of 300 kPa and a volume of 0.070 m3 and the temperature is 390 K. The final pressure is 130 kPa and the final temperature is 310 K.What is the work performed by the gas?a. 16,000 Jb. 19,000 Jc. 9,400 Jd. 13,000 Je. 6,300 J

Answers

V2 = (130 kPa)(0.070 m^3)(310 K)/(300 kPa)(390 K) by using formulas.

To calculate the work performed by the gas during an expansion process, we can use the formula:

W = ∫(P1 to P2) V dP

Since the expansion process is along a linear path on a pV diagram, the work can be calculated using the equation:

W = - ∫(V1 to V2) P dV

where V1 and V2 are the initial and final volumes, and P is the pressure.

Given:

Initial pressure (P1) = 300 kPa

Initial volume (V1) = 0.070 m^3

Initial temperature (T1) = 390 K

Final pressure (P2) = 130 kPa

Final temperature (T2) = 310 K

We know that for an ideal gas, PV = nRT, where n is the number of moles and R is the gas constant.

Rearranging the equation, we get P = nRT/V. Since the number of moles (n) is constant, we can express the pressure as P = k/V, where k is a constant.

Substituting this expression into the work equation, we have:

W = - ∫(V1 to V2) (k/V) dV

W = - k ∫(V1 to V2) (1/V) dV

W = - k ln(V2/V1)

To find k, we can use the ideal gas law at the initial state:

P1V1 = nRT1

k = P1V1

Substituting the values into the equation:

W = - P1V1 ln(V2/V1)

W = - (300 kPa)(0.070 m^3) ln(V2/0.070 m^3)

To find V2, we can use the ideal gas law at the final state:

P2V2 = nRT2

V2 = (P2V1T2)/(P1T2)

Substituting the values:

V2 = (130 kPa)(0.070 m^3)(310 K)/(300 kPa)(390 K)

Calculating V2, we can substitute it back into the work equation to find the work performed by the gas.

The final answer is not provided, so you will need to perform the calculations to determine the exact work value.

Learn more about volume  brainly.com/question/1578538

#SPJ11

determine the most basic nitrogen in each compound. why?

Answers

The most basic nitrogen in a compound refers to the nitrogen atom with the highest ability to attract and donate a proton (H+), resulting in the formation of a stable conjugate acid. To determine the most basic nitrogen, we need to consider factors such as electron density and resonance effects.

To determine the most basic nitrogen in each compound, we need to look at the chemical structure and identify the nitrogen that is the most likely to accept a proton (H+) and form a positive charge. This nitrogen is called the basic nitrogen.


In a compound with multiple nitrogen atoms, the basic nitrogen is typically the one with the lone pair of electrons that is least hindered by neighboring groups or substituents. This is because the lone pair of electrons on the nitrogen is more accessible to an incoming proton.
A long answer to this question would involve analyzing the structures of different compounds and identifying the basic nitrogen in each one.

To  know more about compound visit :-

https://brainly.com/question/13516179

#SPJ11

to prepare 0.250 l of 0.100 m aqueous nacl (58.4 g/mol) one may

Answers

Since most reactions take place in solutions, it's critical to comprehend how the substance's concentration is expressed in a solution. The concept of molarity is used here. The amount of NaCl required to prepare 0.250 l of 0.100 m aqueous Nacl is  1.46 g.

The number of moles of dissolved solute per liter of solution is the definition of molarity, a unit of concentration. Molarity is defined as the number of millimoles per milliliter of the solution by dividing the number of moles and the volume by 1000.

M = Number of moles / volume in L

n = M × V

n = 0.100 × 0.250 = 0.025 moles

Mass of NaCl = 0.025 moles × 58.4 = 1.46 g

To know more about molarity, visit;

https://brainly.com/question/16727614

#SPJ1

Your question is incomplete, most probably your full question was:

What mass of NaCl is added to prepare 0.250 l of 0.100 m aqueous nacl (58.4 g/mol).

Other Questions
this reaction is endothermic: i2(g)2i(g)i2(g)2i(g) predict the effect of the following changes.Predict the effect (shift right, shift left, or no effect) of increasing and decreasing the reaction temperature. How does the value of the equilibrium constant depend on temperature? which of the following would be expected to have the highest vapor pressure at room temperature? Desmond made a scale drawing of a shopping center. In real life, a bakery in the shopping center is 64 feet long. It is 176 inches long in the drawing. What scale did Desmond use for the drawing? why does leo marx argue that technology is a ""hazardous concept""? a pot containing 410 g of water is placed on the stove and is slowly heated from 25c to 92c. Calculate the change of entropy of the water in J/K given that f(x)=9x8, what is the average value of f(x) over the interval [5,6]? (enter your answer as an exact fraction if necessary.) leaders and followers may overlook how changing the situation can help them to change their behavior. this is called: _______________. A current-carrying gold wire has diameter 0.88 mm. The electric field in the wire is0.55 V/m. (Assume the resistivity ofgold is 2.4410-8 m.)(a) What is the current carried by thewire?(b) What is the potential difference between two points in the wire6.3 m apart?(c) What is the resistance of a 6.3 mlength of the same wire? using logisim simulator, draw the combinational circuit that directly implements the boolean expression: f(x,y,z)=(x(y xor z)) (xz)' can someone reword this A client calls the health care provider's office and frantically tells the nurse his TB test is red, and he is afraid this means he has tuberculosis. The best response by the nurse would be:a. "A definitive diagnosis of active pulmonary tuberculosis requires cultures or DNA amplification techniques."b. "This result definitely confirms the diagnosis; we will begin treatment now."c. "Have you eaten anything unusual to cause this reaction?"d. "Wait until tomorrow to see if things change." Please help with that question Which of the following statements about replication is false? a. A DNA double helix could contain one strand that is ten generations older than its complementary stand. b. Licensing factor ensures eukaryotic replication occurs only once per cell cycle. c. Replication can continue in either direction from the origin of replication. d. A DNA strand can serve as a template more than once. e. A DNA double helix may contain two stands of DNA that were made at the same time. i need the work shown for this question Examples of distribution Michelle is an American expatriate starting a new job in China. She shoulda. expect her Chinese coworkers to learn American norms.b. continue to speak only English because it's the language of business.c. rely on relationships formed in the United States.d. establish relationships in China. Product TS-20 has revenue of $102,190, variable cost of goods sold of $51,100, variable selling expenses of $21,460, and fixed costs of $35,260, creating a loss from operations of $5,630. Required: 1.Using the information given, complete the differential analysis as of September 12 to determine if Product TS-20 should be continued (Alternative 1) or discontinued (Alternative 2), assuming fixed costs are unaffected by the decision. 2. Determine if Product TS-20 should be continued (Alternative 1) or discontinued (Alternative 2). Continue Product TS-20 Discontinue Product TS-20Differential Effect on Income Alternative 1Alternative 2Alternative 2 Revenue102,190.000-102,190.00 Costs: Variable cost of goods sold0.00 Fixed-35,260.00-35,260.000.00 Variable selling and administrative expenses Total costs Income (loss) For the following balanced redox reaction answer the following questions 2 Fe+(aq) + H2O2(aq) 2Fe+3(aq) + 2 OH(aq) a. What is the oxidation state of oxygen in H2O2? b. What is the element that is oxidized? c. What is the element that is reduced? d. What is the oxidizing agent? e. What is the reducing agent? 100 Points! Algebra question. Photo attached. Solve the equation. Please show as much work as possible. Thank you! you should reassess your budget at least once a week. (True or False)