this element is in group 1 and has a higher atomic number than chlorine but a lower atomic number than bromine

Because it only contains carbon and hydrogen atoms, which evenly transfer electrons across all of the atoms in the molecule, hexane is a non-polar molecule.

The molecule is non-polar because electrons are distributed evenly throughout it as a result of this equitable sharing.

With the chemical formula C6H14, the hydrocarbon hexane indicates that it has six carbon atoms and fourteen hydrogen atoms. There occurs a formation of three covalent bond by using each carbon atom with hydrogen atom and one more with one carbon atom next to it.

These covalent connections, which require sharing electrons between atoms, require one or more electrons from each element.

Learn more about hexane:

https://brainly.com/question/30549157

#SPJ4

The pipette we can use for 874µL is A P1000 and for 57µL is A P20 and for 340µL is A P200 and for 15µL is A P10 .

To select the appropriate pipette, we need to choose one with a volume range that encompasses the desired volume, but also one that is precise enough for the required application. Here are some options:

a. 874 µL: A P1000 pipette would be appropriate, as it has a volume range of 100-1000 µL and can deliver volumes up to 1 mL with high precision.

b. 57 µL: A P20 pipette would be appropriate, as it has a volume range of 2-20 µL and can deliver volumes up to 20 µL with high precision.

c. 340 µL: A P200 pipette would be appropriate, as it has a volume range of 20-200 µL and can deliver volumes up to 200 µL with high precision.

d. 15 µL: A P10 pipette would be appropriate, as it has a volume range of 0.5-10 µL and can deliver volumes up to 10 µL with high precision.

Learn more about pipette here:

https://brainly.com/question/13719419

#SPJ4

The correct answer to this solution is

Using Raoult's Law

P solution = X solvent * P0 solvent

Where, X solvent = mole fraction of solvent

P0 solvent= vapor pressure of pure solvent = 23.56 torr

Number of moles of solute

= mass/molar mass = 90.0g / 58.44g/mol

= 1.540 moles

However, number of moles of solute particles (n1) after complete dissociation

= 2*1.540 = 3.08 moles

Number of moles of solvent (n2) = 250.0g/18.02g/mol

= 13.874 moles

X solvent = (n,)/ (n, +n,)

                = 13.874 / (3.08+13.874)

                = 0.8183

Learn more about vapor pressure here brainly.com/question/11864750

#SPJ4

The carboxyl group is made up of a carbon atom bonded to an oxygen atom, a hydroxyl group (-OH), and a double-bonded oxygen atom.

The carboxyl group is an organic functional group characterized by a carbon atom bonded to an oxygen atom (-COOH) and a hydroxyl group (-OH). The carbon atom is also double-bonded to an oxygen atom, resulting in the formation of a carbonyl group (-C=O). This combination of functional groups makes the carboxyl group highly reactive, and it is a key component of many organic molecules, including carboxylic acids, amino acids, and many other biochemicals.

The presence of the carboxyl group gives these molecules acidic properties and makes them important components of metabolic reactions. The carboxyl group is also a common target for chemical modification and is used in many industrial and research applications, including drug development and chemical synthesis.

Learn more about carboxyl group:

https://brainly.com/question/26445709

#SPJ4

Hammond's postulate predicts that the charge in the transition state of a reaction will be distributed in a way that minimizes the difference in electronegativity between the two atoms.

Hammond's postulate, also known as Hammond's theorem, states that in the transition state of a reaction, the charge is distributed in such a way as to minimize the difference in electronegativity between the two atoms involved in the reaction. This means that if one of the atoms is more electronegative than the other, it will pull electrons towards itself more strongly and therefore, carry a larger portion of the negative charge in the transition state. The charge distribution in the transition state will therefore be a balance between the electronegativities of the two atoms involved in the reaction.

In the case of the Cl and Br atoms, if the electronegativity difference is significant, the Br atom is likely to carry more of the negative charge. However, it is important to note that this is just a prediction and the actual charge distribution in the transition state may be influenced by other factors, such as bond length, bond angle, and electronic factors.

Learn more about Transition State here:

https://brainly.com/question/476481

#SPJ4

The lewis structure of the SeF₄ is as follows :

                 ..

                 |

                 ..

              : F :

     : F : - Se : - : F :

      °°       |          °°

             : F :

              °°

The total valence electrons in the  SeF₄ is the 34 electrons. The molecular structure of the  SeF₄ is the trigonal bipyramidal. The  Selenium that is Se is the least electronegative atom than the fluorine atom and therefore in the center of the structure.

In  SeF₄  Lewis structure with the Selenium which can hold the more than 8 valence electrons and there are the seven Fluorine atoms with the F.

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

Answer:

Gamma-rays is the answer i think.

Explanation:

I just learned it in chemistry class in August.

The vapor pressure of sea water at 20°C is 0.45 Tor.

First, we calculate the mole fraction of salt in seawater. We can use the formula:

X₂ = moles of salt / (moles of salt + moles of water)

The molar mass of seawater is approximately 0.9645 kg/mol, so the mass of water in 1 kg of seawater is:

mass of water = 1 kg / (1 + 0.9645 kg/mol) = 0.5093 kg

Therefore, the moles of water in 1 kg of seawater are:

moles of water = mass of water / molar mass of water = 0.5093 kg / 0.01802 kg/mol = 28.32 mol

Using the molality, we can calculate the moles of salt in 1 kg of seawater:

moles of salt = molality × mass of water = 1.10 mol/kg × 0.5093 kg = 0.560 mol

Therefore, the mole fraction of salt in seawater is:

X₂ = 0.560 mol / (0.560 mol + 28.32 mol) = 0.0195

Next, we can use the given vapor pressure of pure water at 15°C to calculate the vapor pressure of pure water at 20°C.

ln(P₂°/P₁°) = (ΔH_vap / R) × (1/T₁ - 1/T₂)

ln(P₂°/17.54 Torr) = (40.7 kJ/mol / (8.314 J/(mol·K))) × (1/288.15 K - 1/293.15 K)

Solving for P₂°, we get:

P₂° = 18.91 Torr

Finally, we can use the equation for the change in vapor pressure to calculate the vapor pressure of seawater at 20°C:

ΔP = X₂ × P₂° × i₂

ΔP = 0.0195 × 18.91 Torr × 1.2

ΔP = 0.45 Tor

To know more about vapor pressure here

https://brainly.com/question/11864750

#SPJ4

The dissolution of sodium acetate in water is exothermic. The dissolution of sodium acetate in water is a chemical reaction that releases heat.

This reaction is exothermic, meaning that it releases energy in the form of heat into the surroundings. This occurs because the bonds between the sodium acetate molecules are broken during the dissolution process, and the energy required to break these bonds is released into the water. The amount of heat released during the reaction can be measured using a calorimeter, and can be used to calculate the enthalpy change for the reaction.

The exothermic nature of the dissolution of sodium acetate in water is due to the fact that the energy released by breaking the bonds between the sodium acetate molecules is greater than the energy required to separate the ions in the solution. This results in a net release of energy, which makes the reaction exothermic.

Learn more about endothermic and exothermic:

https://brainly.com/question/13014923

#SPJ4

Answer: The dissolution of sodium acetate in water is exothermic. The dissolution of sodium acetate in water is a chemical reaction that releases heat. This reaction is exothermic, meaning that it releases energy in the form of heat into the surroundings. This occurs because the bonds between the sodium acetate molecules are broken during the dissolution process, and the energy required to break these bonds is released into the water. The amount of heat released during the reaction can be measured using a calorimeter, and can be used to calculate the enthalpy change for the reaction. The exothermic nature of the dissolution of sodium acetate in water is due to the fact that the energy released by breaking the bonds between the sodium acetate molecules is greater than the energy required to separate the ions in the solution. This results in a net release of energy, which makes the reaction exothermic.

Explanation:

The molecular mass of a Ammonium chloride molecule, NH₄Cl is equals to the 53.5 g/mol.

We have a Ammonium chloride molecule, NH₄Cl. It consists one atom of nitrogen, one atom of chlorine and four atoms of hydrogen. Molecular mass of a molecule is the sum of the masses of the individual atoms within the quantities present in a molecule. So, the molecular mass of NH₄Cl, is sum of individual masses of hydrogen, nitrogen and chlorine atoms with number of their atoms. The atomic mass of chlorine atom, Cl = 35.5 g/mol

The atomic mass of hydrogen atom, H = 39.098 g/mol

The atomic mass of nitrogen atom, N

= 14 g/mol

Now, Molecular mass of NH₄Cl = 1× atomic mass of Nitrogen + 1×atomic mass of chlorine + 4× atomic mass of hydrogen atom

= 1×N + 1×Cl + 4×H

= 1× g/mol + 1×14 g/mol + 4×1 g/mol

= 35.5 g/mol + 14 g/mol + 4 g/mol

= 53.5 g/mol

Hence, the molecular mass of NH₄Cl is 53.5 g/mol.

For more information about Molecular mass, visit :

https://brainly.com/question/24191825

#SPJ4

Standard Temperature and Pressure, or STP

1 mole of any gas takes up 22.4L at STP. Answer is 89.6L

What is STP (Standard Temperature and Pressure)?

Numerous thermodynamic tabulations and computations using STP. The density, viscosity, boiling point, and other characteristics of matter will change when the temperature or pressure changes. Calculations are made simpler and comparisons are made feasible by using a single set of criteria (or "state") to tabulate these data.

It is closely connected to the idea of matter in its usual state, sometimes known as "standard circumstances." Standard state does not always refer to a particular temperature, however 25 °C (298 K) is the most typical value used.

On a safety data sheet, the initials "STP" are most frequently found following a physical characteristic of the substance, such as density, flammable limit, or vapor pressure. The SDS's Section 9 (Physical and Chemical Properties) contains information on these characteristics.

To know more about STP, check the link below:

https://brainly.com/question/27100414

#SPJ4

Sucrose is not highly soluble in ethanol, sucrose particles will be seen in the solution that contains both sugar and ethanol.

Two moles of ATP are created during the fermentation of alcohol from one mole of glucose into two moles of ethanol and two moles of carbon dioxide. The sugar sucrose is made up of two sugars: glucose and fructose.

[tex]$$C_6H_{12}O_6 \rightarrow 2 C_2H_5OH + 2 CO_2[/tex]

Inorganic solvents like acetonitrile, benzene, pyridine, and methanol are easily soluble in sucrose octa acetate. At room temperature, it dissolves in 95% ethanol with a 12% (v/v) solubility.

A specific solute may be easily dissolved by some solvents but not by others. Differentiating between these solvents can be done by testing solubility. Because sucrose is not highly soluble in ethanol, sucrose particles will be seen in the solution that contains both sugar and ethanol.

To learn more about sucrose and ethanol refer to:

https://brainly.com/question/12044380

#SPJ4

The vapor pressure of the solution is approximately 20.91 torr, which is closest to option C: 21.77 torr.

To calculate the vapor pressure of the solution, we can use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution.

The mole fraction of water can be calculated as follows:

moles of water:

= (150.0 g / 18.015 g/mol) / [(150.0 g / 18.015 g/mol) + (20.0 g / 58.44 g/mol)]

= 0.887

Raoult's law states that the solution's vapour pressure is:

vapor pressure of water * mole fraction of water

= 23.56 torr * 0.887

= 20.91492 torr.

Learn more about   vapor pressure here:

https://brainly.com/question/11864750

#SPJ4

The molar mass of NaCl and the molar mass of CaCO₃ contain approximately the same number of grams per mol.

In science, the molar mass (M) of a chemical compound is characterized as the proportion between the mass and how much substance (estimated in moles) of any example of said compound.[1] The molar mass is a mass, not sub-atomic, property of a substance. The molar mass is a normal of many occasions of the compound, which frequently fluctuate in mass because of the presence of isotopes.

Most ordinarily, the molar mass is figured from the standard atomic weight and is consequently an earthly normal and an element of the overall wealth of the isotopes of the constituent particles on the planet. The molar mass is fitting for changing over between the mass of a substance and how much a substance for mass amounts.

i()Molar of mass : NaCl: 58.5 g/mol No. of Moles = Mass / Molar mass Mass = 1 × 58.5g Therefore, mass of 1 mole of NaCl is 58.5 g.

(ii) Molecular mass of CaCO₃ = (1 × Ca + 1 × C + 3 × O) = (1 × 40 + 1 ×12 + 3 × 16) = 40 + 12 + 48 = 100 Molar mass of CaCO₃ = 100 g

To know more about molar mass,visit here:

https://brainly.com/question/22997914

#SPJ4

The molar mass of the ferrocene is the 186.0 g/mol.

The molecular formula for the ferrocene is the C₁₀H₁₀Fe.

The molar mass of the carbon is 12 g/mol

The molar mass of the hydrogen is 1 g/mol

The molar mass of the Fe is 55.8 g/mol

The molar mass of the ferrocene , C₁₀H₁₀Fe is as

The molar mass of the ferrocene = 10 (12) + 10 (1) + 55.8

The molar mass of the ferrocene = 186 g/mol.

Thus, molar mass of the  ferrocene that is the C₁₀H₁₀Fe is 186 g/mol.

The ferrocene, C₁₀H₁₀Fe is also called as the  Dicyclopentadienyliron, this is the earliest and best known for the sandwich compounds.

To learn more about molar mass here

https://brainly.com/question/22997914

#SPJ4

The various signals in a 1H NMR spectrum correspond to various hydrogen atom types. Equivalent hydrogen atoms produce the same signal.

The 1H NMR spectrum has three signals in total. 1,3-dimethylbenzene: The two protons in Hc and Hd are each one carbon away from a methyl group, while Hb is located between two methyl groups. The four aromatic protons can therefore be separated into three sets. It is comparable to have two methyl groups.

So, when a 1H NMR experiment is run, the spectrum will only contain one signal that represents all four hydrogens at a single chemical shift. [Here is the NMR spectra]

In terms of NMR, all three Ha protons and all three Hb protons are chemically equal to one another. The Ha and Hb protons are not chemically identical, though. Because of this, the Ha protons' resonance frequency differs from the Hb protons'.

To learn more about 1H NMR spectrum refer to;

https://brainly.com/question/30544771

#SPJ4

A compound can be broken down into simpler substances because it is made up of two or more different elements that are chemically combined together. When a compound is broken down, it results in the formation of new substances that have different properties than the original compound.

Compounds are formed through a chemical reaction between different elements, and the resulting substance is held together by chemical bonds. These bonds can be broken through various processes such as heating, electrolysis, or chemical reactions. Once the bonds are broken, the individual elements that make up the compound are released and can be isolated.

The ability to break down compounds into simpler substances is an important aspect of chemistry, as it allows scientists to study the properties and behavior of individual elements. It also plays a crucial role in industries such as pharmaceuticals and agriculture, where compounds are broken down to extract useful substances. Understanding the composition and behavior of compounds is fundamental to advancing our knowledge of the natural world and improving our quality of life.

Learn more about compound

brainly.com/question/19831841

#SPJ4

The complete question is-

Are the properties of two proteins with the same type and number of amino acids but a different order of linkage the same?

Monosaccharides, also called sugars, have the typical molecular formula [C([tex]$$H_2O[/tex])]n.

Monosaccharides, also called sugars, have the typical molecular formula [C([tex]$$H_2O[/tex])]n, where n = 3–7, and can be classified as either aldehyde-aldoses or ketoses based on whether they contain an aldehyde or ketone functional group.

Examples of monosaccharides include glucose, fructose, galactose, ribose, and deoxyribose. Monosaccharides are one sugar unit (hexose sugar).

The simplest type of carbohydrates are monosaccharides. Monomers called monosaccharides are able to be combined to create more intricate carbohydrates. Carbon, hydrogen, and oxygen make up the molecules that make up monosaccharides.

The monosaccharides consist of simple sugars and their byproducts. The building blocks of more complicated molecules, they are the basic carbohydrate units. At least one hydroxyl group, an aldehyde (RCHO) or ketone (RCOR) group, and carbon atoms with hydrogen atoms attached are the components of monosaccharides.

Therefore, the correct answer is option a. CHOCHO.

To learn more about monosaccharides refer to:

https://brainly.com/question/1768793

#SPJ4

Here, the control group is D. The compost does not affect the photosynthesis of the plant but it will affect its growth. Hence, the possible hypothesis is, since decomposition is necessary for the release of nutrients, the older the compost is, the taller the soybean plants will grow.

Photosynthesis is the biochemical process in plants to produce the chemical energy. The reaction involves combination of water and carbon dioxide to form glucose and oxygen gas. It does not depends on the nutrients or compost from the soil.

Old  compost is made by mixing organic wastes in the right proportions into piles, rows, or containers; adding bulking agents, as needed, to create air spaces; regulating temperature, moisture, and oxygen to achieve accelerated decomposition; and allowing the finished product to fully stabilize and mature through a curing process.

Therefore,  the possible hypothesis for this experiment is option 3. since decomposition is necessary for the release of nutrients, the older the compost is, the taller the soybean plants will grow.

Find more on composts:

https://brainly.com/question/12624929

#SPJ1

The substance which will undergo a change of state from liquid to solid if the temperature was decreased from 30°C to -5°C is bromine and is denoted as option A.

This is referred to as physical change in a matter and it is a reversible change and do not involve any changes in the chemical makeup of the matter.

Bromine exists as a readily-volatilized liquid at room temperature. By using a coolant at a temperature below the freezing point of bromine (m.p. = -7.2 degrees Celsius) it is possible to obtain solid bromine crystals on the surface of the cold test tube.

Read more about Bromine here https://brainly.com/question/23894494

#SPJ1

We must understand the relationship between moles, molar mass and mass to be able to solve questions with them:

[tex]n=\dfrac{m}{M}[/tex]

We're given:

Apply the formula:

[tex]n=\dfrac{m}{M}[/tex]

[tex]n=\dfrac{35.2}{120.368}\\\\n=0.292\hspace{4}mol[/tex]

0.292 mol

The volume of the water is 7100 cm³

A decomposition reaction is a type of chemical reaction in which a single compound breaks down into two or more simpler substances. In a decomposition reaction, a reactant is broken down into two or more products, typically through the application of heat, light, or an electrical current.

Mass of the ZnSO4.7H2O = 54.46g - 41.64g

= 12.86 g

Number of moles of the  ZnSO4.7H2O =  12.86 g/287.6 g/mol

= 0.045 moles

If 1 mole of ZnSO4.7H2O produces 7 moles of water

0.045 moles produces  0.045 * 7/1

= 0.315 moles

If 1 mole of gas occupies 22.4 L

0.315 moles of gas occupies 0.315 * 22.4/1

= 7.1 L or 7100 cm³

Learn more about decomposition:https://brainly.com/question/8009068

#SPJ1

Ammonia (NH₃) is a weak base.

When dissolved in water, ammonia reacts with water molecules to form ammonium ions (NH₄⁺) and hydroxide ions (OH⁻), according to the following equation:

NH₃ + H₂O ⇌ NH₄⁺ + OH⁻

Ammonia only partially dissociates in water, which means that it produces relatively few hydroxide ions compared to a strong base like sodium hydroxide (NaOH). Therefore, ammonia is considered a weak base.

The strength of a base is determined by its ability to donate hydroxide ions (OH⁻) in water, which is quantified by the base dissociation constant (Kb). The Kb value for ammonia is relatively low (1.8 x 10⁻⁵), compared to strong bases like sodium hydroxide (Kb value of 1.0 x 10¹⁴).

Overall, ammonia can still react with acids to form salts and water, but its reactivity is much weaker than that of a strong base.

To know more about Ammonia here

https://brainly.com/question/15409518

#SPJ4

The strongest intermolecular force in phosphoric acid is ion-dipole.

What is an ion dipole bond?

An ion-dipole bond is a type of chemical bond that occurs between an ion and a molecule with a dipole moment. Ions are charged atoms or molecules that have lost or gained one or more electrons, resulting in a net positive or negative charge. Dipole moments occur when the electrons in a molecule are not evenly distributed, resulting in one end of the molecule having a partial negative charge and the other end having a partial positive charge.

In an ion-dipole bond, the ion is attracted to the opposite partial charge on the dipole molecule. This attraction is known as an electrostatic interaction or Coulombic interaction, and it is a type of intermolecular force.

To learn more about the ion dipole bond, click the given link ;

https://brainly.com/question/29282058

#SPJ4

The IUPAC names for the following compounds are :

(a) Propylbenzene

(b) 3-Methylpentanenitrile

(c) 2,5-Dimethylheptane

(d) 3-Brome-3-chloroheptane

(e) 3-chloropropanal

(f) 2,2-Dichloroethanol

The IUPAC naming rules are the certain rules that are regarding the naming of the organic compounds. The compounds will be numbered based on the longest chain of the carbon atoms in it. The numbering will be starts from the position of the double bond or the triple bond.

The name will be given in the alphabetical order with the prefix of the functional groups and the number is  in the manner that the carbons atoms containing the functional groups will have the small numbers.

To learn more about IUPAC here

https://brainly.com/question/30086566

#SPJ4

The concept of covalent bond is introduced by the scientist G.N. Lewis. The Lewis structure of hydrogen sulfide is similar to that of water.

The structure in which the electrons of the compound are represented by dots is defined as the Lewis structure. It provide a picture of bonding in molecules in terms of the shared pairs of electrons and the octet rule.

The structure of H₂S contains two 'H' atoms and one 'S' atom. The central element is sulfur and two hydrogen atoms are linked with the help of a single bond. It has tetrahedral shape.

Thus the Lewis structure of H₂S is shown below.

To know more about Lewis structure, visit;

https://brainly.com/question/20300458

#SPJ1

The compound CO has name carbon monoxide while CH₂ and NO₂ respectively ethylene and nitrogen dioxide respectively.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ1

Atomic mass of bromine is 80 g. The mass of four moles of molecular bromine (Br₂) is 640 g. The correct alternative is not given.

To find the mass of four moles of molecular bromine (Br₂), you can use the formula:

mass = moles × molar mass

The molar mass of Br₂ is the atomic mass of bromine multiplied by two, since there are two atoms of bromine in each molecule of Br₂. So the molar mass of Br₂ is:
molar mass of Br2 = 80 g × 2 = 160 g

Now you can plug in the values for moles and molar mass into the formula:

mass = 4 moles × 160 g = 640 g

So the mass of four moles of molecular bromine (Br₂) is 640 g.

To know more about Atomic mass here:

https://brainly.com/question/29117302#

#SPJ11