Answer:
C
Explanation:
The Anvil is the stationary part of the tool, the spindle is the threaded moveable part
I NEED HELP!!!Situation: A client has hired Jose, a materials engineer, to develop a package for an item he has begun to market. The object needs to be mailed to customers within three days of being ordered.
Answer:
what Jose would do is first develop the package for the product, then find a company to mass produce the package he made, the find a shipping retailer that can get it shipped out to the customer within 3 days of ordering it.
Explanation:
In an ideal reheat cycle, steam is generated at 6.3 Mpa, 450 deg. C and partially expands to 0.84 Mpa. At this point, the steam is withdrawn and passed through a reheater. It re-enters the turbine at 0.84 Mpa and 480 deg. C. Complete expansion now occurs to the condenser pressure of 0.02 Mpa. Find the following: a. Enthalpies b. Total heat added and rejected c. Total turbine work and pump work d. Net cycle work e. Cycle efficiency and engine efficiency
why is it important to follow properly the different steps in painting and varnishing a product ?
Answer:
The main reason for this is the ingredients found in the paint. Different Ingredients are used to make different types of color paints, therefore when each of these paints is used in connection with the solvent the different chemicals in the paint create a certain reaction with the chemicals in the solvent, and each reaction may be different in each color depending on the chemical compound.
Technician A says that the differential gear set allows for the difference is speed of each drive wheel when cornering. Technician B says that the final drive assembly connects the engine to the transmission. Who is correct?
Answer:
Technician A says that the differential gear set allows for the difference is speed of each drive wheel when cornering.
Technician will say that the differential gear set allows for the difference is speed of each drive wheel when cornering.
What is the last stage of gears?The last stage of gears found between the vehicle transmission system and the wheels is the final drive ratio. The function of the final drive gear assembly is to enable a gear reduction control stage to reduce the rotation per minute and increase the wheel torque, such that the vehicle performance can be adjusted and the final gear ratio can be between 3:1 and 4.5:1 not 1:1
A gear is a rotating , circular machine element with teeth that can be cut, or in the case of a cogwheel or gearwheel, they can be inserted. These teeth, known as cogs, mesh with another grooved part to transfer (convert) torque and speed.
The basic idea underlying how gears work is comparable to the fundamental idea behind how levers work. Cog is another casual term for a gear. Geared devices can vary the speed, torque, and orientation of a power supply.
Therefore, Technician will say that the differential gear set allows for the difference is speed of each drive wheel when cornering.
Learn more about Technician on:
https://brainly.com/question/14290207
#SPJ2
Compute the number of games using the formula of “SINGLE ROUND ROBIN” and plot the games in a table:
● N=9
● N=8
● N=10
Answer:
N=27.02
Explanation:
An urgent. Please answer this. :)
1 & 2 are Ω
3 & 4 are V
Answer:
See below ↓
Explanation:
1) 40 Ω
2) 24 Ω
3) 85 V
4) 135 V
Which one of the following best defines hardness: (a) energy absorbed by a material when an object strikes its surface, (b) resistance to bending, (c) resistance to permanent indentation, or (d) resistance to scratching
Resistance to permanent indentation
Which forces on the arrow before is released ?
What should you consider when choosing a shotgun as a firearm?
Which of the following are parts of the natural environment? (Select the best four answers.)
Question 1 options:
A sweater
A bear
Prairie grass
A volcano
A cloud
A bathtub
A car
A log cabin
Answer:
Bear, prairie grass, volcano, and cloud.
how should an instructor act in front of his recruits and cadets?
Answer:
Professional
Explanation:
:)
What is the name of the two-phase microstructure found in steels resulting from the eutectoid transformation of austenite and consisting in alternate layers of ferrite and cementite
Here I hope this is what you need?
When austenite in iron-carbon alloys is transformed isothermally below the eutectoid temperature at small undercooling, it undergoes eutectoid transformation to produce a unique micro- structure termed “pearlite”, which was discovered by Sorby in 1864.
So i was watching a f1 race and i was wondering, what part of the car stops during a lock-up (when the wheel stops while turning on a corner)
pls help me thank you
Answer: 1. Hand Plane
2. Rift Sawn
Explanation: I'm not Sure tho hope it helps
what is shown in the above figure
Answer:
there is no figure .....
Jordan's dad made a new recipe for dinner. Jordan looked at the food and saw that it was white, yellow, and purple in color. She picked up a few pieces and felt that they were firm. As she moved the pieces to her mouth, she recognized the scent of carrot and black pepper. When she took a bite, she noticed it was salty and sweet.
Which statement best describes how Jordan used her senses to know what ingredients were in the recipe?
Answer:
Jordan used her eyes to see the food, her touch to feel the food, and her nose to smell the food, and lastly, but most importantly, she used her mouth to taste the food.
What is the potiental energy of a 3 kg ball that is on the ground
Answer:
147.15
Explanation:
147.15 is the answer
Technician A says that that a box-end wrench is more likely to round the head of a bolt than an open-end wrench. Technician B says that 6-point sockets and wrenches have more surface area on a bolt and will hold more firmly when removing and tightening. Who is correct? a. Technician A b. Technician B c. Both A and B d. neither A nor B I need the answer so I don't fail my test.
Answer:
The answer is C. Both A and B
Select the correct answer from each drop-down menu.
Dan and Andy have studied blology and are interested in different fields of this subject. Dan loves observing animals and studying the motion of
animals, while Andy wants to branch into the medical field and research artificial limbs and other body parts. What branches of engineering
would the two pursue?
Dan and Andy would pursue different branches of mechanical engineering. The field of
deals with the mechanics
of living organisms
y deals with the creation of artificial body parts.
The branches that the two pursue is the field of Biology that deals with the mechanics of living organisms and the field of prosthetics that deals with the creation of artificial body parts.
What is the medical field about?The medical field is known to be the field of Medicine and it is one that centers around health and healing. It is made up of nurses, doctors, etc.
Note that in the above scenario, The branches that the Dan and Andy is the field of Biology that deals with the mechanics of living organisms and the field of prosthetics that deals with the creation of artificial body parts.
Learn more about animals from
https://brainly.com/question/25897306
Help me please.please,please
Answer:
Explanation:
learn some manners You have
For a master blacksmith or metal worker, what qualities distinguish a feature of a house worth preserving for historical reasons from one that is not worth preserving? (Select all that apply.)
metal
original
noncorroded
copper
Answer:
I think "a","b","c"
Explanation:
I tried and sorry if its wrong
which article refers us back to article 430.24 in the service calculation?
A.220.55
B.220.60
C.220.50
D.220.12
Answer:
B
Explanation:
Do Only plastic pipe, not flexible tubing have a maximum temperature rating?
Answer:
No they both can
Explanation:
A 10 kg mass is lifted to a height of 2 m What is the potiental energy at this position
Answer:
5000 wt
Explanation:
Energy=mass÷height
=10,000÷2
=5000wt
When you walk down the street, your muscles are supplying you with the
energy to move (10letters)
Your muscles are supplying you with the energy to move through a biological process called metabolism.
What is metabolism?Metabolism can be defined as a set of chemical and biological processes that are carried out by a living organism, in order to sustain life.
A good example of metabolism is the supply of energy by the muscles in the body of a living organism, which enables him or her to move from one point to another.
In conclusion, your muscles are able to supply you with the energy to move through a biological process called metabolism.
Read more on metabolism here: https://brainly.com/question/1490181