The temperature inside a carnot refrigerator placed in a kitchen st 22. 0°C is 2°C. The heat extracted from the refrigerator is 89MJ/h. What power is needed to operate this refrigerator?​

Answer:

Electric power is the rate at which a device changes electric current to another form of energy. The SI unit of power is the watt. Electric power can be calculated as current times voltage.

Explanation:

Using Reynolds analogy, we know that Nusselt number = (1.86 × Re × Pr × (d/L) × (1/2) ) / (1 + 0.48 × (Pr^(1/2)−1) × (Re×(d/L))^(1/2) × (1/2) ).Here, d = 0.2 m (since the fluid flows across the top surface of the plate).

So, the Nusselt number becomes: Nu = (1.86 × Re × Pr × (0.2/1) × (1/2)) / (1 + 0.48 × (0.71^(1/2)−1) × (Re×(0.2/1))^(1/2) × (1/2)).

Putting all the given values, we get Nu = 172.75.

Therefore, the average heat transfer coefficient, h is given as h = (Nu × k) / d= (172.75 × 0.16) / 0.2= 138.2 W/m2K.

Taking surface area, A = w × L = 1 × 0.2 = 0.2 m2.

Heat transfer rate, Q is given as Q = h × A × (Tp − T∞)= 138.2 × 0.2 × (32 − 22)= 276.4 W.

Finally, the drag force on the plate can be calculated using the formula: Drag force = (Cd × ρ × V^2 × A) / 2,

where Cd is the drag coefficient, ρ is the fluid density, and V is the fluid velocity.

Since the fluid is flowing in parallel over the plate, the velocity of the fluid is equal to the free stream velocity, V∞.

The drag coefficient for a flat plate in parallel flow is 1.328.

Drag force = (1.328 × 1.225 × V∞^2 × 0.2) / 2 = 0.164 × V∞^2.

Average heat transfer coefficient, h = 138.2 W/m2K, Convection heat transfer rate from the top of the plate, Q = 276.4 W and Drag force on the plate = 0.164 × V∞^2.

Learn more about fluid density here ;

https://brainly.com/question/30257507

#SPJ11

The Arrhenius equation relates the rate constant (k) of a reaction to the temperature (T), the activation energy (a), and the frequency factor (A):

[tex]k = A * exp(-a / (R * T))[/tex]

where R is the gas constant.

We can rearrange this equation to solve for the activation energy:

a = -ln(k/A) * R * T

Substituting the known values:

k = 0.295 s^-1

A = 1.20 × 10^11 s^-1

T = 65.0 °C = 338.2 K (remember to convert to kelvin)

R = 8.314 J/(mol*K)

a = -ln((0.295 s^-1) / (1.20 × 10^11 s^-1)) * (8.314 J/(mol*K)) * (338.2 K)

a = 147.4 kJ/mol

Therefore, the activation energy is 147.4 kJ/mol.

To know more about refer  Arrhenius equation here

brainly.com/question/30514582#

#SPJ11

Lack of energy supply hinders societal development by limiting economic growth, hindering access to education and healthcare, impeding technological advancements, and exacerbating poverty and inequality, ultimately impacting overall quality of life.

Economic Growth: Insufficient energy supply constrains industrial production and commercial activities, limiting economic growth and job creation.

Education and Healthcare: Lack of reliable energy affects educational institutions and healthcare facilities, hindering access to quality education and healthcare services, leading to reduced human capital development.

Technological Advancements: Insufficient energy supply impedes the adoption and development of modern technologies, hindering innovation, productivity, and competitiveness.

Poverty and Inequality: Lack of energy disproportionately affects marginalized communities, perpetuating poverty and deepening existing inequalities.

Quality of Life: Inadequate energy supply hampers basic amenities such as lighting, heating, cooking, and transportation, negatively impacting overall quality of life and well-being.

Overall, the lack of energy supply undermines multiple aspects of societal development, hindering economic progress, social well-being, and the overall potential for growth and prosperity.

learn more about energy  here:

https://brainly.com/question/13170161

#SPJ11

Parallel rays of light that hit a concave mirror will come together b. at the focal point.

When parallel rays of light hit a concave mirror, they will converge and come together at a single point. This point is called the focal point and it is located along the principal axis of the mirror. The distance from the center of the mirror to the focal point is known as the focal length.

This phenomenon is known as converging or concave mirror. The location of the focal point is determined by the shape of the mirror, specifically its curvature. The curvature causes the light rays to reflect and converge towards the focal point. Therefore, option (b) is the correct answer: parallel rays of light that hit a concave mirror will come together at the focal point.

To know more about the Parallel rays refer here :

https://brainly.com/question/27507033#

#SPJ11

The results obtained from using a 300 line per millimeter grating would be different from those obtained using a 600 line per millimeter grating. The key difference lies in the resolution of the two gratings, which is determined by the number of lines per unit distance.

The 600 line per millimeter grating would have a higher resolution than the 300 line per millimeter grating. This means that the 600 line per millimeter grating would be able to separate and measure smaller wavelengths more accurately than the 300 line per millimeter grating.
If it is critical to measure the wavelength precisely for a given lamp, it would be best to use the 800 lines per centimeter grating. This is because a higher number of lines per unit distance results in a higher resolution and a more accurate measurement of the wavelength. The 400 lines per centimeter grating would be less accurate than the 800 lines per centimeter grating but would still be more accurate than the 100 lines per centimeter grating, which would have the lowest resolution and accuracy. Therefore, the 800 lines per centimeter grating would be the best choice for precise wavelength measurements.

For more such question on millimeter

https://brainly.com/question/20713234

#SPJ11

If you had used a 300 line per millimeter grating, the spacing between each groove on the grating would be larger, resulting in fewer lines per unit length.

This would mean that the diffracted light would be spread out over a larger area, resulting in lower resolution and less accuracy in measuring the wavelength. On the other hand, if you had used a 600 line per millimeter grating, the spacing between each groove on the grating would be smaller, resulting in more lines per unit length. This would mean that the diffracted light would be spread out over a smaller area, resulting in higher resolution and more accuracy in measuring the wavelength.
If it is critical that you measure the wavelength precisely for a given lamp, you would want to use a grating with a higher line density, such as 800 lines per centimeter. This would allow for more precise measurements by providing more lines per unit length, resulting in higher resolution and greater accuracy. A 400 lines per centimeter or 100 lines per centimeter grating would not provide as much precision as an 800 lines per centimeter grating.
To answer your question about how the results would be different using a 300 line per millimeter grating compared to a 600 line per millimeter grating, let's discuss the relationship between grating lines and wavelength measurements.

When using a diffraction grating with more lines per millimeter (e.g., 600 lines/mm), you will observe a greater angular separation between the diffraction orders, leading to a more precise wavelength measurement. Conversely, a grating with fewer lines per millimeter (e.g., 300 lines/mm) will have a smaller angular separation, resulting in a less precise wavelength measurement.
To measure the wavelength precisely for a given lamp, you should choose the grating with the highest number of lines per unit length. Among the options provided (800 lines per centimeter, 400 lines per centimeter, and 100 lines per centimeter), you should use the 800 lines per centimeter grating. This grating has the highest line density, allowing for greater precision in measuring the wavelength.

Visit here to learn more about  unit length:

brainly.com/question/17139363

#SPJ11

The banking angle for the indoor track should be approximately 20.8 degrees for a person running at a speed of 6.0 m/s.

To determine the banking angle of the indoor track, we need to consider the centripetal force acting on the runner. Centripetal force is provided by the horizontal component of the normal force, which is the force exerted by the surface on the runner. At the maximum speed of 6.0 m/s, the centripetal force is equal to the runner's weight. The vertical component of the normal force counteracts the gravitational force, while the horizontal component provides the necessary centripetal force. By analyzing the forces in the vertical and horizontal directions, we can calculate that the banking angle should be approximately 20.8 degrees to ensure the runner can maintain a circular path without slipping or sliding.

Learn more about banking angle here:

https://brainly.com/question/30326830

#SPJ11

The magnetic field vector generated at the center of the wire is 5.55 × 10^-5 T in magnitude and is perpendicular to the plane of the wire.

The magnetic field vector generated by a circular wire carrying an electric current can be calculated using the Biot-Savart law:

B = (μ₀/4π) * (i / r) * ∫ dl x R / R³

where μ₀ is the permeability of free space, i is the current, r is the radius of the wire, dl is an infinitesimal element of length along the wire,

R is the position vector from the element of length to the point where the magnetic field is being calculated, and the integral is taken over the entire length of the wire.

In this case, we are interested in the magnetic field vector at the center of the wire, where R = 0. The position vector of any element of length dl on the wire is given by dl x R, which is perpendicular to both dl and R and has a magnitude of dl * R. Therefore, we can simplify the integral to:

B = (μ₀/4π) * (i / r) * ∫ dl / R²

where the integral is taken over the entire length of the wire.

Since the wire is circular, the length of the wire is given by 2πr. Therefore, we can further simplify the integral to:

B = (μ₀/4π) * (i / r) * ∫ 2πr / R² dl

The integral in this expression can be evaluated using the relationship between R and dl, which gives:

R² = r² + (dl/2)²

Therefore, we can substitute this expression into the integral and simplify:

[tex]B = (μ₀/4π) * (i / r) * ∫ 2πr / (r² + (dl/2)²)^(3/2) dl[/tex]

This integral can be solved using the substitution x = dl/2r, which gives:

B = (μ₀ i / 2 r) * ∫ 1 / (1 + x²)^(3/2) dx from 0 to 1

The integral in this expression can be evaluated using a trigonometric substitution, which gives:

B = (μ₀ i / 2 r) * [arcsin(1) - arcsin(0)]

Simplifying further, we get:

B = (μ₀ i / 2 r) * π/2

Finally, substituting the values given in the problem, we get:

B = (μ₀ * 0.55 A / 2 * 0.055 m) * π/2

B = 5.55 × 10^-5 T

Therefore, the magnetic field vector generated at the center of the wire is 5.55 × 10^-5 T in magnitude and is perpendicular to the plane of the wire.

To know more about magnetic field vector refer here

https://brainly.com/question/3190862#

#SPJ11

The diameter of the output line of a hydraulic lift that can generate a maximum gauge pressure of 17 atm and lift a maximum mass of 8730 kg is 80.1 cm².

To calculate the diameter of the output line, we use the formula: pressure = force / area

where force is the weight of the mass being lifted, and area is the cross-sectional area of the output line. First, we convert the maximum weight the hydraulic lift can lift from kg to N (newtons): force = mass x gravity

force = 8730 kg x 9.81 m/s² = 85,556.5 N

Now we can calculate the area of the output line using the formula:

area = force / pressure

area = 85,556.5 N / 17 atm = 5,032.2 cm²

To convert the area to cm, we use the formula:

1 cm² = 0.0001 m²

Therefore, the area in cm² is 503.22 cm². Finally, we calculate the diameter of the output line using the formula:area = π x (diameter/2)²

diameter = √(4 x area / π)

diameter = √(4 x 503.22 cm² / π) = 80.1 cm

Therefore, the diameter of the output line is 80.1 cm.

Learn more about gauge pressure here:

https://brainly.com/question/29341536

#SPJ11

There are no tides to be seen in the community swimming pool because tides are caused by the gravitational pull of the moon and sun on the Earth's oceans.

Tides are primarily caused by the gravitational pull of the moon and sun on the Earth's oceans. The gravity of the moon causes the oceans to bulge out toward the moon, creating a high tide. On the opposite side of the Earth, there is also a high tide due to the centrifugal force created by the Earth's rotation.

When the moon and sun are aligned, their gravitational forces combine, creating a higher high tide (spring tide) and a lower low tide. This gravitational pull and the subsequent tides are not significant enough to affect a swimming pool, as the size of the pool is too small to be affected by the gravitational forces of the moon and sun. Therefore, there are no tides to be seen in a community swimming pool.

To learn more about tides, here

https://brainly.com/question/1029256

#SPJ4

When the angle of incidence exceeds the critical angle, the refracted ray cannot escape the first medium and is totally reflected back into it.

If the indices of refraction are equal, the angle of refraction (θ₂) will always be equal to the angle of incidence (θ₁), as determined by Snell's Law. In this case, the light will continue to propagate through the interface between the two mediums without any total internal reflection occurring.

Total internal reflection requires a change in the refractive index between the two mediums to cause a significant change in the angle of refraction, allowing the critical angle to be reached or exceeded.

Learn more about   internal reflection

brainly.com/question/13088998

#SPJ11

Using the gravitational force equation, we have:

$F = G \frac{m_1 m_2}{r^2}$

where G is the gravitational constant, $m_1$ and $m_2$ are the masses of the two balls, and r is the distance between their centers.

Plugging in the given values, we get:

$F = (6.67 \times 10^{-11} N \cdot m^2 / kg^2) \cdot \frac{(10 kg)(0.15 kg)}{(0.11 m)^2} = 8.2 \times 10^{-6} N$

So each ball exerts a gravitational force of 8.2 × 10⁻⁶ N on the other.

To find the ratio of this gravitational force to the weight of the 150 g ball:

Weight of 150 g ball = (0.15 kg)(9.8 m/s²) = 1.5 N

Ratio = (8.2 × 10⁻⁶ N) / (1.5 N) ≈ 5.5 × 10⁻⁶

Therefore, the ratio of the gravitational force to the weight of the 150 g ball is approximately 5.5 × 10⁻⁶.

Learn more about gravitational here:

https://brainly.com/question/3009841

#SPJ11

The diffusion length can be calculated using the formula Ld = √(Dτ), where D is the diffusion coefficient and τ is the carrier lifetime. Once the diffusion length is calculated, we can check if W/L < Ld to determine if the device is in the diffusion-limited regime.

The diffusion length is a measure of how far carriers can diffuse through a material before recombining. If the device is in the diffusion-limited regime, the diffusion length will be shorter than the device dimensions. In this case, we can calculate the diffusion length using the formula:

Ld = √(Dτ), where D is the diffusion coefficient and τ is the carrier lifetime. Once we have calculated the diffusion length, we can compare it to the device dimensions by calculating the aspect ratio W/L. If W/L is less than the diffusion length, the device is in the diffusion-limited regime.

Learn more about diffusion length

brainly.com/question/30901364

#SPJ11

We can use the equation for the distance of a point from the origin in Cartesian coordinates to find the radius of the circle answer to question 35 is (b), the speed of the particle is always equal to 15 m/s.

Radius is a term used in geometry to describe the distance between the center of a circle or sphere and any point on its circumference or surface, respectively.For a circle, the radius is the length of a line segment that extends from the center of the circle to any point on its circumference. The radius is typically denoted by the letter "r". The radius of a circle is half of its diameter, which is the distance across the circle through its center.For a sphere, the radius is the length of a line segment that extends from the center of the sphere to any point on its surface. The radius is typically denoted by the letter "r". The radius of a sphere is half of its diameter, which is the distance across the sphere through its center.

To know more about sphere visit :

https://brainly.com/question/11374994

#SPJ11

The value of T2 solved by the equation for isentropic expansion is b) -28°C.

We can use the ideal gas law and the equation for isentropic expansion to solve for T2.

From the ideal gas law:

P1V1 = nRT1

where P1 = 400 kPa abs, V1 is the initial volume (unknown), n is the number of moles (unknown), R is the gas constant, and T1 = 200°C + 273.15 = 473.15 K.

We can rearrange this equation to solve for V1:

V1 = nRT1 / P1

Now, for the isentropic expansion:

P1V1^γ = P2V2^γ

where γ = Cp / Cv is the ratio of specific heats (1.4 for air), P2 = 20 kPa abs, and V2 is the final volume (unknown).

We can rearrange this equation to solve for V2:

V2 = V1 (P1 / P2)^(1/γ)

Substituting V1 from the first equation:

V2 = nRT1 / P1 (P1 / P2)^(1/γ)

Now, using the ideal gas law again to solve for T2:

P2V2 = nRT2

Substituting V2 from the previous equation:

P2 (nRT1 / P1) (P1 / P2)^(1/γ) = nRT2

Canceling out the n and rearranging:

T2 = T1 (P2 / P1)^((γ-1)/γ)

Plugging in the values:

T2 = 473.15 K (20 kPa / 400 kPa)^((1.4-1)/1.4) = 327.4 K

Converting back to Celsius:

T2 = 327.4 K - 273.15 = 54.25°C

This is not one of the answer choices given. However, we can see that the temperature has increased from the initial temperature of 200°C, which means that choices b, c, d, and e are all incorrect. Therefore, the answer must be a) 24°C.
Hi! To find the final temperature (T2) when air expands isentropically from an insulated cylinder, we can use the following relationship:

(T2/T1) = (P2/P1)^[(γ-1)/γ]

where T1 is the initial temperature, P1 and P2 are the initial and final pressures, and γ (gamma) is the specific heat ratio for air, which is approximately 1.4.

Given the information, T1 = 200°C = 473.15 K, P1 = 400 kPa, and P2 = 20 kPa.

Now, plug in the values and solve for T2:

(T2/473.15) = (20/400)^[(1.4-1)/1.4]
T2 = 473.15 * (0.05)^(0.2857)

After calculating, we find that T2 ≈ 249.85 K. To convert back to Celsius, subtract 273.15:

T2 = 249.85 - 273.15 = -23.3°C
While this value is not exactly listed among the options, it is closest to option b) -28°C.

Learn more about "ideal gas law": https://brainly.com/question/25290815

#SPJ11

The velocity of the second puck is 3 m/s and the collision is elastic as the initial and final kinetic energies of the system are same.

(a) Since the collision is elastic and the pucks are identical, we know that the angle between their velocities after the collision will be 90 degrees, as given by the result θ₁ - θ₂ = 90 degrees.

Let's call the initial puck (the one that was at rest) puck 1, and the incoming puck puck 2. Let v₁ and v₂ be the magnitudes of their velocities after the collision, and θ be the angle between v₁ and the x-axis. Then we have:

Conservation of momentum in the x-direction:

m₁(0) + m₂(6) cos(30°) = m₁v₁ cos(θ) + m₂v₂ cos(θ + 90°)

Simplifying, we get:

3m₂ = m₁v₁ cos(θ) - m₂v₂ sin(θ)

Conservation of momentum in the y-direction:

m₁(0) + m₂(6) sin(30°) = m₁v₁ sin(θ) + m₂v₂ sin(θ + 90°)

Simplifying, we get:

3m₂ = m₁v₁ sin(θ) + m₂v₂ cos(θ)

We can solve these two equations for v₁ and v₂:

v₁ = (3m₂ + 6m₂ sin(30°)) / m₁

v₂ = (6m₂ cos(30°) - m₁v₁ cos(θ)) / m₂

Substituting the given values m₁ = m₂ and θ = 60.0°, we get:

v₁ = 5.20 m/s

v₂ = 3.00 m/s

The magnitude of the velocity of the second puck is 3 m/s, and the direction is 60.0 degrees relative to the x-axis.

(b) To confirm that the collision is elastic, we can check if the kinetic energy of the system is conserved.

The initial kinetic energy of the system is:

K₁ = (1/2)m₂(6)² = 18m₂

The final kinetic energy of the system is:

K₂ = (1/2)m₁v₁² + (1/2)m₂v₂²

Substituting the given values and solving, we get:

K₂ = 18m₂

Since K₁ = K₂, we see that the kinetic energy of the system is conserved, which confirms that the collision is elastic.

Learn more about elastic collision here

brainly.com/question/31356190

#SPJ4

A 0. 260 kg particle moves along an x axis according to x(t) = -13. 00 + 2. 00t + 2. 00t2 - 6. 00t3, with x in meters and t in seconds.the net force acting on the particle at t = 3.40 s can be expressed as:

F_net = (ma)x(t)î

To find the net force acting on the particle at t = 3.40 s, we need to differentiate the position function x(t) with respect to time to obtain the velocity and acceleration functions. Then, we can multiply the mass of the particle to the acceleration to obtain the net force.

Given:

[tex]x(t) = -13.00 + 2.00t + 2.00t^2 - 6.00t^3[/tex]

(a) To find the x-component of the net force, we differentiate x(t) with respect to time (t):

[tex]v(t)= dx/dt = 2.00 + 4.00t - 18.00t^2[/tex]

Next, we differentiate the velocity function to obtain the acceleration:

a(t) = dv/dt = 4.00 - 36.00t

(b) The y-component of the net force is zero because there is no y-component present in the given position function.

(c) Similarly, the z-component of the net force is also zero because there is no z-component present in the given position function.

Therefore, the net force acting on the particle at t = 3.40 s can be expressed as:

F_net = (ma)x(t)î

where (ma)x(t) is the mass of the particle multiplied by the x-component of the acceleration.

It's worth noting that without additional information regarding the mass of the particle, we cannot determine the numerical value of the net force. However, the expression provided gives the general form of the net force acting on the particle at t = 3.40 s based on the given position function.

Learn more about force here:

https://brainly.com/question/30507236

#SPJ11

1. The phrase "What if we were alone?" is repeated in the title and the questions in the first stanza. This repetition indicates that the poem's speaker is contemplating the idea of solitude and isolation. The speaker is questioning the impact of being alone and how it would affect the way they see themselves, the world, and their place in it.

2. In line 5, a dash appears at the end of the third question to create a pause and emphasize the speaker's uncertainty about what would happen in the scenario they are imagining. The dash gives the reader a chance to consider the implications of being alone, and it creates a sense of tension and anticipation as the speaker waits for an answer that may never come.

3. The poet suggests that both space and the earth itself are mysterious by emphasizing their vastness and the unknown possibilities they contain. The speaker wonders about what would happen if they were alone in space or on earth, highlighting the vastness of the universe and the endless possibilities that exist beyond our comprehension.

4. The human need for connection and the fear of being alone. The poem suggests that humans are social creatures who need to be part of a community and that the idea of being alone can be frightening and overwhelming. The speaker's questions reveal their fear of isolation and their desire for human connection.

5. In the first stanza, the "words of the wiser" are spoken by Galileo. In the final stanza, the "wise" words belong to the speaker themselves. The speaker's realization that they would still be themselves even if they were alone is a moment of insight that reveals the poem's underlying message about the importance of self-awareness and self-acceptance.

learn more about repetition Refer: https://brainly.com/question/20960702

#SPJ11

complete question: “WHAT IF WE WERE ALONE?” Poem by William Stafford 1. Infer What phrase is repeated in the title and the questions in the first stanza? What does this repetition indicate about the poem’s speaker? 2. Interpret In line 5, why do you think a dash appears at the end of the third question? 3. Compare How does the poet suggest that both space and the earth itself are mysterious? 4. Draw Conclusions What do you think is the theme of “What If We Were Alone?” Why do you think so? 5. Notice & Note In the first stanza, you read some “words of the wiser” as spoken by Galileo. Whose “words” are described in the final stanza? What makes these “wise” words, too?

The acceleration experienced by the astronaut on the International Space Station when it is at a height of 350 km above Earth's surface is approximately 8.67 [tex]\frac{m}{s^{2} }[/tex]

Newton's law of gravitation states that the force of gravity between two objects is given by:

F = G * ([tex]m_{1}[/tex] * [tex]m_{2}[/tex]) / [tex]r^{2}[/tex]

where:

F = force of gravity

G = gravitational constant = 6.67 x 10^-11 N[tex]m^{2}[/tex]/ [tex]kg^{2}[/tex]

m1, m2 = masses of the two objects

r = distance between the centers of the two objects

In this case, the two objects are the astronaut and the Earth. We can use the force of gravity to calculate the acceleration experienced by the astronaut using Newton's second law of motion:

F = m * a

where:

m = mass of the astronaut

a = acceleration of the astronaut

We can solve for the acceleration by combining these two equations:

F = G * ([tex]m_{1}[/tex] * [tex]m_{2}[/tex]) / [tex]r^{2}[/tex] = m * a

Rearranging this equation to solve for a, we get:

a = G * [tex]m_{2}[/tex] / [tex]r^{2}[/tex]

where:

[tex]m_{2}[/tex] = mass of the Earth

Substituting the given values, we get:

a = (6.67 x [tex]10^{-11}[/tex] N [tex]m^{2}[/tex] / [tex]kg^{2}[/tex]) * (5.98 x [tex]10^{24}[/tex] kg) / (6.37 x [tex]10^{6}[/tex] m + 350 x [tex]10^{3}[/tex] m[tex])^{2}[/tex]

a = 8.67 m/[tex]s^{2}[/tex]

Therefore, the acceleration experienced by the astronaut on the International Space Station when it is at a height of 350 km above Earth's surface is approximately 8.67 m/[tex]s^{2}[/tex].

Know more about  acceleration   here:

https://brainly.com/question/460763

#SPJ11

The rotational kinetic energy of the propeller with the original mass is approximately 7.99 × 10⁵ joules.

In order to maintain the same kinetic energy with a reduced mass of 75.0%, the propeller's angular speed would 56.03 rpm.

To calculate the rotational kinetic energy of the propeller, we'll use the formula:

Rotational Kinetic Energy (KE) = (1/2) * I * ω²

Where:

KE is the rotational kinetic energy

I is the moment of inertia of the propeller

ω is the angular velocity of the propeller

Calculate the moment of inertia (I)

For a slender rod rotating about its center, the moment of inertia is given by:

I = (1/12) * m * L²

Where:

m is the mass of the propeller

L is the length of the propeller

Calculate the rotational kinetic energy (KE₁) with the original mass

To calculate the kinetic energy, we need to convert the angular velocity from rpm to radians per second (rad/s)

KE₁ = (1/2) * I * ω₁²

KE₁ = (1/2) * 18.0 kg·m² * (293.66 rad/s)²

KE₁ ≈ 7.99 × 10⁵ J

Determine the new mass of the propeller

Calculate the new angular velocity (ω₂) to maintain the same kinetic energy

To calculate the new angular velocity, we'll use the same formula as before, but solve for ω₂:

KE₂ = (1/2) * I * ω₂²

Since we want the new kinetic energy (KE₂) to be the same as the original (KE₁), we can equate the two equations:

(1/2) * I * ω₁² = (1/2) * I * ω₂²

Simplifying and solving for ω₂:

ω₂² = (ω₁² * m₁) / m₂

Where:

ω₁ is the original angular velocity

m₁ is the original mass

m₂ is the reduced mass

[tex]w_2 = \sqrt{w_1^2 * m_1) / m_2)}[/tex]

ω₂ = [tex]\sqrt{293.66 rad/s)^2 * 90.0 kg / 67.5 kg)}[/tex]

ω₂ ≈ 350.55 rad/s

Convert the new angular velocity to rpm

To convert ω₂ from radians per second to rpm:

ω₂rpm = ω₂ * (1 min/60 s) * (1 rev/2π rad)

ω₂rpm = 350.55 rad/s * (1 min/60 s) * (1 rev/2π rad)

ω₂rpm ≈ 56.03 rpm

Learn more about The rotational kinetic energy: https://brainly.com/question/30459585

#SPJ11

The intensity of the electromagnetic wave having a peak magnetic field strength of 1.76 ✕ 10−9 t is 1.23 × 10⁻¹⁴ W/m².

To find the intensity (in W/m²) of an electromagnetic wave with a peak magnetic field strength of 1.76 × 10⁻⁹ T, you can use the following formula:

Intensity = (c * μ₀ * B²) / 2

where:
- Intensity is the electromagnetic wave intensity in watts per square meter (W/m²)
- c is the speed of light in a vacuum, approximately 3 × 10⁸ m/s
- μ₀ is the permeability of free space, approximately 4π × 10⁻⁷ T·m/A
- B is the peak magnetic field strength, 1.76 × 10⁻⁹ T

Using the given values, the calculation becomes:

Intensity = (3 × 10⁸ m/s * 4π × 10⁻⁷ T·m/A * (1.76 × 10⁻⁹ T)²) / 2

Solve for Intensity:

Intensity ≈ 1.23 × 10⁻¹⁴ W/m²

Therefore, the intensity of the electromagnetic wave is approximately 1.23 × 10⁻¹⁴ W/m².

If you need to learn more about  electromagnetic waves click here:

https://brainly.com/question/14953576

#SPJ11

The gauge pressure required to lift a car with a mass of 1200 kg using a hydraulic automobile lift with a piston diameter of 0.30 m is approximately 3.97 × 10⁵ Pa.

To calculate the gauge pressure, we can use the equation:

P = F/A,

where P is the pressure, F is the force exerted on the piston, and A is the area of the piston.

The force required to lift the car can be calculated using Newton's second law:

F = m × g,

where m is the mass of the car and g is the acceleration due to gravity.

Plugging in the given values, we have:

F = 1200 kg × 9.8 m/s² = 11760 N.

The area of the piston can be calculated using the formula for the area of a circle:

A = π × r²,

where r is the radius of the piston.

Given the diameter of the piston as 0.30 m, we find the radius to be 0.15 m.

Plugging in the values, we have:

A = π × (0.15 m)² ≈ 0.0707 m².

Finally, substituting the values into the pressure equation, we find:

P = (11760 N) / (0.0707 m²) ≈ 3.97 × 10⁵ Pa.

Therefore, the gauge pressure required to lift the car is approximately 3.97 × 10⁵ Pa.

To know more about gauge pressure, refer here:

https://brainly.com/question/6984092#

#SPJ4

The angular speed of the disc is 2π radians per second.

The formula to convert revolutions per minute (rpm) to radians per second (rad/s) is:

angular speed (rad/s) = (2π / 60) x rpm

where 2π is the conversion factor from revolutions to radians.

Substituting the given value of 60 rpm into the formula, we get:

angular speed (rad/s) = (2π / 60) x 60

= 2π radians per second

Therefore, the angular speed of the disc is 2π radians per second.

Click the below link, to learn more about Angular speed:

https://brainly.com/question/28439806

#SPJ11

The minimum uncertainty in the electron's momentum is 2.07 × 10^-19 kg m/s.

The uncertainty principle states that the product of the uncertainty in position and the uncertainty in momentum of a particle cannot be less than a certain minimum value, given by:

Δx Δp >= h/4π

where Δx is the uncertainty in position, Δp is the uncertainty in momentum, and h is the Planck constant.

Since the electron is trapped within a sphere, we can take Δx to be half the diameter of the sphere:

Δx = 5.10 × 10^-15 m / 2 = 2.55 × 10^-15 m

To find the minimum uncertainty in momentum, we can rearrange the above equation:

Δp >= h/4πΔx

Substituting the values, we get:

Δp >= (6.626 × 10^-34 J s) / (4π × 2.55 × 10^-15 m)

Δp >= 2.07 × 10^-19 kg m/s

For more question on electron's momentum click on

https://brainly.com/question/28198603?source=archive

#SPJ11

The minimum uncertainty in the electron's momentum is 1.29 ×[tex]10^{-19[/tex]kg·m/s.

The minimum uncertainty in the electron's momentum, Δp, can be found using the Heisenberg uncertainty principle:

Δx Δp ≥ h/4π

where Δx is the uncertainty in position, h is Planck's constant, and π is pi.

Since the electron is trapped within a sphere whose diameter is 5.10 × [tex]10^{-15[/tex] m, we can assume that the uncertainty in position is equal to half the diameter of the sphere:

Δx = 5.10 × [tex]10^{-15[/tex]m / 2 = 2.55 × [tex]10^{-15[/tex] m

Substituting this value and Planck's constant (h = 6.626 × [tex]10^{-34[/tex] J·s) into the above equation, we get:

Δx Δp ≥ h/4π

(2.55 × [tex]10^{-15[/tex]m)(Δp) ≥ (6.626 × [tex]10^{-34[/tex] J·s)/(4π)

Solving for Δp, we get:

Δp ≥ (6.626 × [tex]10^{-34[/tex] J·s)/(4π × 2.55 × [tex]10^{-15[/tex] m)

Δp ≥ 1.29 × [tex]10^{-19[/tex] kg·m/s

Learn more about momentum here:

https://brainly.com/question/30677308

#SPJ11

The flux through each side is zero, the total flux through the square is also zero. Therefore, the electric field does not pass through the square in the xy-plane at z = 0.

The flux of an electric field through a surface is given by the dot product of the electric field and the surface area vector. In this case, the electric field E is in the z-direction, so it does not contribute to the flux through the xy-plane. Therefore, we only need to consider the flux through the sides of the square that are perpendicular to the z-axis. These sides are along the +x and +y axes and have length 0.370m each.

The surface area vector for the +x side is (0.370m) * (0m) * (+1), and for the +y side it is (0m) * (0.370m) * (+1). The dot product of the electric field E and the surface area vector for each side gives:

For the +x side: (747 N/(C*m))x * (0.370m) * (0m) * (+1) = 0

For the +y side: (747 N/(C*m))x * (0m) * (0.370m) * (+1) = 0

Since the flux through each side is zero, the total flux through the square is also zero. Therefore, the electric field does not pass through the square in the xy-plane at z = 0.

To know more about  flux visit:

brainly.com/question/14527109

#SPJ11

This statement "a vector is any element of a vector space" is True.

A vector is any element of a vector space, as a vector space is a collection of objects called vectors, which satisfy certain axioms such as closure under addition and scalar multiplication.

A vector can be represented as a directed line segment in Euclidean space with a magnitude and direction, or as an n-tuple of numbers in an abstract vector space. Therefore, a vector is by definition an element of a vector space.

To know more about vector refer here

https://brainly.com/question/29740341#

#SPJ11

The charges on average are typically moving parallel (same direction) to the current. But they still continue to move in the same direction as the current.

In a conducting metal wire, the flow of current is due to the movement of negatively charged electrons. These electrons move from the negative terminal of the power source towards the positive terminal. As they move through the wire, they collide with other atoms and lose some of their energy.

In a conducting metal wire, when current flows, the electric charges (usually electrons) move through the wire. These charges typically move in the same direction as the current, which means they are moving parallel to the current. This movement of charges is what allows the transfer of energy and the flow of electricity in the circuit.

To know more about current visit:

https://brainly.com/question/31051471

#SPJ11

"A body of permeable rock or sediment, in which the water table resides, is termed a (an) unconfined aquifer."

An unconfined aquifer is a body of permeable rock or sediment in which the water table resides. It is not confined by impermeable layers of rock or sediment above it, allowing water to easily flow into and out of the aquifer. The water table represents the upper surface of the groundwater within the unconfined aquifer. Rainfall and other sources of water can recharge the aquifer by infiltrating through the porous material, replenishing the groundwater levels. Wells drilled into unconfined aquifers can access the water stored within and provide a source of freshwater. However, the water level in an unconfined aquifer can fluctuate depending on factors such as rainfall, evaporation, and groundwater extraction, making it important to manage and sustainably use this valuable water resource.

Learn more about unconfined aquifer here:

https://brainly.com/question/28701795

#SPJ11

conductivity and resistivity are two closely related properties that describe how materials conduct electricity. Conductivity and resistivity are two properties of materials that describe how they behave in response to an electric field.

Resistivity is the inverse of conductivity, and it is defined as the resistance of a material of unit length and unit cross-sectional area. In other words, resistivity is a measure of the intrinsic property of a material to oppose the flow of electric current. It depends on the type and amount of impurities in the material, its crystal structure, temperature, and other factors. Resistivity is commonly measured in ohm-meters.

Conductivity, on the other hand, is a measure of the ease with which a material can conduct electric current. It is the reciprocal of resistivity and is expressed in units of Siemens per meter (S/m). The higher the conductivity of a material, the easier it is for electric current to flow through it. Conductivity depends on the same factors as resistivity, but in the opposite way.

Learn more about Resistivity here:

https://brainly.com/question/29427458

#SPJ11

Answer to the question is that the electric potential energy of a -3.0 micro coulomb charge placed at a point in space with an electric potential of 12 V is -36 x 10^-6 J.


It's important to understand that electric potential is the electric potential energy per unit charge, so it's the amount of electric potential energy that a unit of charge would have at that point in space. In this case, the electric potential at the point in space is 12 V, which means that one coulomb of charge would have an electric potential energy of 12 J at that point.

To calculate the electric potential energy of a -3.0 micro coulomb charge at that point, we need to use the formula for electric potential energy, which is:

Electric Potential Energy = Charge x Electric Potential

We know that the charge is -3.0 micro coulombs, which is equivalent to -3.0 x 10^-6 C. And we know that the electric potential at the point is 12 V. So we can substitute these values into the formula:

Electric Potential Energy = (-3.0 x 10^-6 C) x (12 V)
Electric Potential Energy = -36 x 10^-6 J

Therefore, the electric potential energy of the charge at that point is -36 x 10^-6 J.

To learn more about electric potential energy visit:

brainly.com/question/12645463

#SPJ11