The rectangular prism below is labeled with its measured dimensions. Taking measurement
error into account, what are the minimum and maximum possible volumes?
12 in
13 in
9 in
Minimum possible volume =
Maximum possible volume =
in 3
in 3

A sample size of approximately 136 is needed to estimate the true mean score within 5 points with 95% confidence.

To determine the sample size needed to estimate the true mean score within 5 points with 95% confidence, we can use the formula for sample size calculation:

n = (Z * σ / E)²

In this case, the standard deviation (σ) of the statistics test is given as 29.7, and the desired margin of error (E) is 5.

Plugging these values into the formula:

[tex]n = (1.96 * 29.7 / 5)^2[/tex]

Calculating this expression:

n ≈[tex](58.212 / 5)^2[/tex]

n ≈ [tex]11.6424^2[/tex]

n ≈ 135.6336

Therefore, a sample size of approximately 136 is needed to estimate the true mean score within 5 points with 95% confidence.

Learn more about sample size https://brainly.com/question/30520316

#SPJ1

The standard bus takes x + 29 minutes and the airplane takes x / 2 minutes.

The express bus from Dublin to Belfast takes x minutes, and the standard bus takes 29 minutes longer.

To find the time the standard bus takes, we simply add 29 minutes to the time the express bus takes.

The expression for the time the standard bus takes is:
Standard bus time = x + 29
The airplane takes half the time the express bus takes.

To find the time the airplane takes, we divide the time the express bus takes by 2.

The expression for the time the airplane takes is:
Airplane time = x / 2.

For similar question on expression.

https://brainly.com/question/4344214

#SPJ11

True. Triangulation can be used to find the location of an object by measuring the angles.

Triangulation is a method used to determine the location of an object by measuring the angles between the object and two or more reference points whose locations are known.

This method is widely used in surveying, navigation, and various other fields.

By measuring the angles, the relative distances between the object and the reference points can be determined, and then the location of the object can be calculated using trigonometry.

Triangulation is commonly used in GPS systems, where the location of a GPS receiver can be determined by measuring the angles between the receiver and several GPS satellites whose locations are known.

Know more about triangulation here:

https://brainly.com/question/1558502

#SPJ11

Answer:

--------------------

Area is the product of two dimensions, so the ratio of areas of similar figures is equal to the square of the scale factor k.

Hence the scale factor is:

Therefore the ratio of corresponding parts is:

Using trigonometric identities;

a. We are able to proof that [sin(90° + θ)sin²( θ - 180°) - cos θ(180° +  θ)] / [cos θ - 2sin² θ] = cos 2θ

b. The general solution is:

x = cos⁻¹(-1/3) + 2kπ and x = 2π - cos⁻¹(-1/3) + 2kπ, where k is an integer.

a. To prove the identity:

[sin(90° + θ)sin²( θ - 180°) - cos θ(180° +  θ)] / [cos θ - 2sin² θ] = cos 2θ

First, let's simplify the left-hand side (LHS) of the equation:

[sin(90° + θ)sin²( θ - 180°) - cos θ(180° +  θ)] / [cos θ - 2sin² θ]

= [cos θ sin²( θ - 180°) - cos θ(180° +  θ)] / [cos θ - 2sin² θ]

= [cos θ sin²( θ - 180°) - cos θ(180° +  θ)] / cos θ [1 - 2sin² θ / cos θ]

= [cos θ sin²( θ - 180°) - cos θ(180° +  θ)] / cos θ [1 - 2sin² θ / cos θ]

Next, simplify each term individually:

cos θ sin²( θ - 180°) = cos θ (-sin² θ) = -cos θ sin² θ

cos θ(180° +  θ) = cos θ * 180° + cos θ * θ = 180° cos θ + θ cos θ

2sin² θ / cos θ = 2(sin θ / cos θ)² = 2tan² θ

Substituting these simplified terms back into the equation:

[-cos θ sin² θ - (180° cos θ + θ cos θ)] / cos θ [1 - 2tan² θ]

= [-cos θ sin² θ - 180° cos θ - θ cos θ] / cos θ [1 - 2tan² θ]

= -cos θ [sin² θ + 180° + θ] / cos θ [1 - 2tan² θ]

= -(sin² θ + 180° + θ) / [1 - 2tan² θ]

Now, we can use trigonometric identities to simplify further:

sin² θ + cos² θ = 1

1 - cos² θ = sin² θ

1 - sin² θ = cos² θ

tan² θ + 1 = sec² θ

Using these identities, we can rewrite the expression as:

-(sin² θ + 180° + θ) / [1 - 2tan² θ]

= -(1 - cos² θ + 180° + θ) / [1 - 2tan² θ]

= -(1 - (1 - sin² θ) + 180° + θ) / [1 - 2tan² θ]

= -(-sin² θ + 180° + θ) / [1 - 2tan² θ]

= (sin² θ - 180° - θ) / [1 - 2tan² θ]

= cos 2θ / [1 - 2tan² θ]

Hence, we have shown that the left-hand side (LHS) of the equation is equal to cos 2θ, which verifies the identity.

b. To determine the general solution of 6sin²x +

7cosx - 3 = 0:

Start by rewriting the equation using trigonometric identities:

6(1 - cos²x) + 7cosx - 3 = 0

6 - 6cos²x + 7cosx - 3 = 0

-6cos²x + 7cosx + 3 = 0

Now, let's solve this quadratic equation for cosx:

Multiply the equation by -1 to make the leading coefficient positive:

6cos²x - 7cosx - 3 = 0

Using factoring or the quadratic formula, we can solve for cosx. However, since the coefficients do not easily factor, we will use the quadratic formula:

cosx = (-b ± √(b² - 4ac)) / (2a)

Plugging in the values, we have:

cosx = (-(-7) ± √((-7)² - 4(6)(-3))) / (2(6))

cosx = (7 ± √(49 + 72)) / 12

cosx = (7 ± √121) / 12

cosx = (7 ± 11) / 12

Now we have two possible solutions for cosx:

1. cosx = (7 + 11) / 12 = 18 / 12 = 3 / 2 (not possible since -1 ≤ cosx ≤ 1)

2. cosx = (7 - 11) / 12 = -4 / 12 = -1 / 3

Since the cosine function is positive in the first and fourth quadrants, and the given equation involves cosine, we are interested in solutions in those quadrants.

In the first quadrant, x can be determined using the inverse cosine function:

x = cos⁻¹(-1/3)

In the fourth quadrant, x can be determined using the inverse cosine function and the fact that cosine is periodic:

x = 2π - cos⁻¹(-1/3)

Therefore, the general solution is:

x = cos⁻¹(-1/3) + 2kπ and x = 2π - cos⁻¹(-1/3) + 2kπ, where k is an integer.

Learn more on trigonometric identities here;

https://brainly.com/question/24496175

#SPJ1

The limit of xy/(√[tex]x^2+y^2[/tex]) as (x, y) approaches (0, 0) does not exist.

On the x-axis, all points have y = 0. Therefore, the expression xy/(√[tex]x^2+y^2[/tex]) reduces to 0/|x|, which is equal to 0 for x ≠ 0 and undefined at x = 0.

Next, let's approach (0, 0) along the y-axis. On this path, all points have x = 0. Therefore, the expression xy/(√[tex]x^2+y^2[/tex]) reduces to 0/|y|, which is equal to 0 for y ≠ 0 and undefined at y = 0.

Since the limit of the expression along the x-axis and y-axis are different, the limit at (0, 0) does not exist.

To prove this, we can also use polar coordinates.

Let x = r cosθ and y = r sinθ, then the expression becomes:

lim (r, θ) -> (0, 0) [tex]r^2[/tex] cosθ sinθ / r

which simplifies to:

lim (r, θ) -> (0, 0) r cosθ sinθ

This limit does not exist, as the value of r cosθ sinθ depends on the angle θ. For example, when θ = 0, r cosθ sinθ = 0, but when θ = π/4, r cosθ sinθ = [tex]r^2[/tex]/2.

for such more question on limit

https://brainly.com/question/12017456

#SPJ11

To find the limit, if it exists, of Lim (x, y) → (0, 0) xy/(√x^2+y^2), we first examine the limit as we approach (0, 0) along the x-axis. When we follow this path,it helps to analyse the limit.

On the x-axis, y=0 for all points. Therefore, the limit can be examined as lim (x, 0) → (0, 0) x(0)/(√x^2+0^2). Simplifying, we get lim (x, 0) → (0, 0) 0/|x|. As we approach 0 from both positive and negative sides of the x-axis, the denominator |x| approaches 0. However, the numerator remains 0. Thus, the limit is 0. Therefore, all points on the x-axis approach 0 as we approach (0, 0).

that is,  Lim (x, y) → (0, 0) x(0)/(√x^2+0^2) = Lim (x, y) → (0, 0) 0/(√x^2)

As x approaches 0, the numerator is always 0, while the denominator is |x|. Thus, the limit along the x-axis is:

Lim (x, y) → (0, 0) 0/|x| = 0

To learn more about limit click here, brainly.com/question/29795597

#SPJ11

Answer:

The occurrence of one event (e.g., A) precludes the occurrence of the other event (e.g., B), and vice versa.

Step-by-step explanation:

The pair of events A and B, "Your new skateboard design is a success" and "Your new skateboard design is a failure," are mutually exclusive.

This is because the two events cannot occur simultaneously; the design cannot be both a success and a failure at the same time.

Therefore, the occurrence of one event (e.g., A) precludes the occurrence of the other event (e.g., B), and vice versa.

To know more about mutually exclusive refer here

https://brainly.com/question/9857599#
#SPJ11

(a) The value of the function f.g(x) = f(x²+9) = (x²+9)²
(b) The value of the function g.f(x) = g(x²) = x⁴+9
(c) The value of the function f.f(x) = f(x²) = (x²)²
(d) The value of the function g.g(x) = g(x²+9) = (x²+9)²+9

Domains of each:
(a) All real numbers
(b) All real numbers
(c) All real numbers
(d) All real numbers

For composite functions, you insert the second function into the first function.

(a) f.g(x) = f(g(x)) = f(x²+9) = (x²+9)²
(b) g.f(x) = g(f(x)) = g(x²) = x⁴+9
(c) f.f(x) = f(f(x)) = f(x²) = (x²)²
(d) g.g(x) = g(g(x)) = g(x²+9) = (x²+9)²+9

The domain of a function is the set of input values for which the function is defined. Since all these composite functions are polynomial functions, they are defined for all real numbers.

To know more about composite functions click on below link:

https://brainly.com/question/20379727#

#SPJ11

We need to know the area of the ramp in order to calculate the total cost of the material. Let's assume the ramp has a length of L feet and a width of W feet. Then the area of the ramp can be calculated as:

Area = Length x Width = L x W

We don't have any specific values for L and W, but let's assume that Santiago wants to build a ramp that is 10 feet long and 3 feet wide. In that case:

Area = 10 feet x 3 feet = 30 square feet

Now we can calculate the cost of building the ramp by multiplying the area by the cost per square foot:

Cost = Area x Cost per square foot = 30 square feet x $2.20/square foot

Cost = $66

Therefore, the cost of building the ramp with a length of 10 feet and a width of 3 feet, using material that costs $2.20 per square foot, would be $66.

Answer: If it is just subtraction (I am not sure, it would be 0.69

Step-by-step explanation:

4.73-4.04=.69

again not sure what exactly is being asked here so ill take what i see

The table should be

x  0   1    2   3    4    

y  0   3   6   9    12  

The equation of the table is y = 3x

The appropriate graph is graph A

For the scenario provided, we were told that one bowling game cost $3. If x should represent the number of game and y the cost of each game, then the equation for y should be the multiple of x

Therefore y = 3(0) = 0;  y = 3(1) = 3;    y= 3(2) = 6;  y = 3(3) = 9 and it goes on

The only graph that has shows that when x is 1,y is 3 or when x is 2, y is 6 is graph A. Therefore the right answer is y = 3x and graph A.

Find more exercises on graph equations;

https://brainly.com/question/30842552

#SPJ1

Answer:

17.4

Step-by-step explanation:

The Hundredths place is above four so it has to be the next number up

Answer:17.40

Step-by-step explanation:

17.37 rounded to the nearest tenth is, 17.40, because when rounding, you see if the number is 5 or up ( that means you round it up.)

The variation of parameter formula is used to determine the general solution of a second-order linear differential equation. In this case, we have t^2y''+3ty'+yln(t)=0. To use the variation of parameter formula, we first need to find the complementary solution. Then we can find two particular solutions and use them to form the general solution. The complementary solution is y_c=c1t^(-1/3)+c2t. To find the particular solutions, we assume y1=u1(t)t^(-1/3) and y2=u2(t)t, where u1(t) and u2(t) are functions of t. Plugging these into the differential equation and solving for u1(t) and u2(t), we get the particular solutions. The general solution is then y=y_c+y1+y2.

The given differential equation is t^2y''+3ty'+yln(t)=0. We first find the complementary solution by assuming y=e^(rt) and solving the characteristic equation r^2+3r+ln(t)=0. The roots are complex, so the complementary solution is y_c=c1t^(-1/3)+c2t.
Next, we assume y1=u1(t)t^(-1/3) and y2=u2(t)t as the particular solutions. Then, we can find the derivatives y1'=-u1'(t)t^(-1/3)+(-1/3)u1(t)t^(-4/3) and y2'=u2'(t)t+(1/t)u2(t), and y1''=u1''(t)t^(-1/3)+(2/9)u1(t)t^(-7/3)+(2/3)u1'(t)t^(-4/3) and y2''=u2''(t)t+(2/t)u2'(t)-(1/t^2)u2(t). Plugging these into the differential equation, we get the system of equations:
u1''(t)t^(-1/3)+(2/9)u1(t)t^(-7/3)+(2/3)u1'(t)t^(-4/3)+u2''(t)t+(2/t)u2'(t)-(1/t^2)u2(t)=ln(t)
(-1/3)u1'(t)t^(-1/3)+(1/t)u2(t)=0
Solving for u1(t) and u2(t), we get:
u1(t)=(1/18)t^2(ln(t)-6C1t^(4/3)+18C2t^(2/3))
u2(t)=C3t+((1/3)t^2+C4)ln(t)
Therefore, the general solution is:
y=c1t^(-1/3)+c2t+(1/18)t^2(ln(t)-6C1t^(4/3)+18C2t^(2/3))+C3t+((1/3)t^2+C4)ln(t)

Using the variation of parameter formula, we found the general solution of the given differential equation to be y=c1t^(-1/3)+c2t+(1/18)t^2(ln(t)-6C1t^(4/3)+18C2t^(2/3))+C3t+((1/3)t^2+C4)ln(t). This formula can be used to solve similar second-order linear differential equations.

To know more about differential equation visit:

https://brainly.com/question/31583235

#SPJ11

If this process is repeated many times, approximately 67% of the time the destination state will be California, 20% of the time it will be Nevada, and 13% of the time it will be Utah.

One way to produce a random number between 1 and 3, denoting the destination state with a probability that is proportional to the number of friends in each state, is:

Calculate the total number of friends: 10 + 3 + 2 = 15

Calculate the probabilities of choosing each state: California = 10/15 = 0.67, Nevada = 3/15 = 0.20, Utah = 2/15 = 0.13

Generate a random number between 0 and 1 using a random number generator, denoted by x.If 0 ≤ x < 0.67, choose California.

If 0.67 ≤ x < 0.87, choose Nevada.

If 0.87 ≤ x ≤ 1, choose Utah.

This method ensures that the probability of choosing each state is proportional to the number of friends in that state.

For example, if this process is repeated many times, approximately 67% of the time the destination state will be California, 20% of the time it will be Nevada, and 13% of the time it will be Utah.

Learn more about probability here, https://brainly.com/question/25839839

#SPJ11

Answer:      266.6666667% of 150 = 400

Step-by-step explanation:

I find organized lists to be the easiest method to use to identify sample spaces for compound events. This is because organized lists are the most straightforward way to list all of the possible outcomes of an event.

Tables and tree diagrams can be helpful as well, but they can be more difficult to create and interpret.

The Fundamental Counting Principle states that if there are n ways to do one thing, and m ways to do another thing, then there are n × m ways to do both things. This principle can be used to help identify a sample space for a compound event by multiplying the number of ways each event can occur. For example, if you are rolling a die and flipping a coin, there are 6 ways to roll the die and 2 ways to flip the coin. Therefore, there are 6 × 2 = 12 possible outcomes of the compound event.

The Fundamental Counting Principle is a useful tool for identifying sample spaces, but it does have some limitations. One limitation is that it only applies to events that are independent. Independent events are events where the outcome of one event does not affect the outcome of the other event. For example, the outcome of drawing a card from a deck does affect the outcome of drawing another card from the deck. In this case, the Fundamental Counting Principle cannot be used to determine the sample space.

Another limitation of the Fundamental Counting Principle is that it does not take into account the probability of each outcome. The probability of an outcome is the likelihood that the outcome will occur. For example, the probability of rolling a 6 on a die is 1/6. The probability of flipping a coin and getting heads is 1/2. The probability of rolling a 6 and flipping a coin and getting heads is 1/6 × 1/2 = 1/12.

Find out more on Fundamental Counting here: https://brainly.com/question/30884753

#SPJ1

Answer: 3

Step-by-step explanation:

Answer:

2x+9=15

Step-by-step explanation:

Find common denominator

Combine fractions with common denominator

Multiply the numbers

Multiply all terms by the same value to eliminate fraction denominators

Cancel multiplied terms that are in the denominatorMultiply the numbers

The maximum number of jugs of drinking water and cases of paper towels that the truck can transport is 75 cases of paper towels and 31 jugs of drinking water.

A truck is transporting jugs of drinking water and cases of paper towels. A jug of drinking water weighs 40 pounds, while a case of paper towels weighs 16 pounds. The truck can carry a total of 2000 pounds of cargo.

When it comes to such problems, it is necessary to use algebra to solve them. x is the number of jugs of water, while y is the number of paper towel cases. The problem is that the total number of jugs and cases should not exceed 2000 pounds.x + y ≤ 2000

The weight of each jug and the weight of each case are added together:40x + 16y ≤ 2000These two equations are used to construct the answer by combining them to yield a range of possible values for x and y, as well as the feasibility of the solution.

Using the first equation:x + y ≤ 2000y ≤ -x + 2000

Using the second equation:40x + 16y ≤ 2000-5x - 2y ≤ -250y ≤ 5/2x + 125

Finally, graph the inequalities:

y ≤ -x + 2000y ≤ 5/2x + 125

Using the graph, the region where both inequalities are satisfied is shaded.

As a result, the intersection of these two regions is the area where the equation is valid.

The feasible range of jugs of drinking water and cases of paper towels can now be found. Therefore, a conclusion to this problem can be drawn.

The maximum number of jugs of drinking water and cases of paper towels that the truck can transport is 75 cases of paper towels and 31 jugs of drinking water.

To know more about inequalities visit:

brainly.com/question/20383699

#SPJ11

The angle the ladder makes with the ground is approximately 58.1 degrees.

We can utilize geometry to find the point that the stepping stool makes with the ground. We should call the point we need to find "theta" (θ).

In the first place, we can draw a right triangle with the stepping stool as the hypotenuse, the separation from the wall as the contiguous side, and the level the stepping stool comes to as the contrary side. Utilizing the Pythagorean hypothesis, we can track down the level of the stepping stool:

[tex]a^2 + b^2 = c^2[/tex]

where an is the separation from the wall (6 m), b is the level the stepping stool ranges, and c is the length of the stepping stool (11 m). Improving the condition and settling for b, we get:

b = [tex]\sqrt (c^2 - a^2)[/tex] = [tex]\sqrt(11^2 - 6^2)[/tex] = 9.3 m

Presently, we can utilize the digression capability to track down the point theta:

tan(theta) = inverse/contiguous = b/a = 9.3/6

Taking the converse digression (arctan) of the two sides, we get:

theta = arctan(9.3/6) = 58.1 degrees (adjusted to one decimal spot)

Subsequently, the point that the stepping stool makes with the ground is around 58.1 degrees.

To learn more about an example on ladder problems, refer:

https://brainly.com/question/18982257

#SPJ1

Note that the missing probability P(A | B) =  12/25. this was solved using Bayes Theorem.

By adding new knowledge, you may revise the expected odds of an occurrence using Bayes' Theorem. Bayes' Theorem was called after the 18th-century mathematician Thomas Bayes. It is frequently used in finance to calculate or update risk evaluation.

Bayes Theorem is given as

P(A |B ) = P( A and B) / P(B)

We are given that

P(B) = 1/4 and P(A and B) = 3/25,

so substituting, we have

P(A |B ) = (3/25) / (1/4)

To divide by a fraction, we can multiply by its reciprocal we can say

P(A|B) = (3/25) x (4/1)

 = 12/25

Therefore, P(A | B) = 12/25.

Learn more about probability:
https://brainly.com/question/11234923?
#SPJ1

Answer:

In the given relation {(4, 2), (-3, 0), (2, 5), (-1, 4), (0, 1)}, the x-values are 4, -3, 2, -1, and 0.

Therefore, the domain of the relation is {4, -3, 2, -1, 0}.

Step-by-step explanation:

Answer:

{4, -3, 2, -1, 0}.

Step-by-step explanation:

To calculate the deflection at point D on the circular rod, we need to consider the segments BD, CD, and AD. Using the formula δ=∑NLAE, we can calculate the deflection as 0.0516 m.

To calculate the deflection at point D using the formula δ=∑NLAE, we need to first segment the rod and then calculate the deflection for each segment.

Segment the rod

Based on the given information, we need to consider segments BD, CD, and AD to calculate the deflection at point D.

Calculate the internal normal force N for each segment

We can calculate the internal normal force N for each segment using the formula N=F1+F2 (for BD), N=F2 (for CD), and N=0 (for AD).

For segment BD

N = F1 + F2 = 140 kN + 55 kN = 195 kN

For segment CD

N = F2 = 55 kN

For segment AD

N = 0

Calculate the cross-sectional area A for each segment

We can calculate the cross-sectional area A for each segment using the formula A=πd²/4.

For segment BD:

A = πd₁²/4 = π(7.6 cm)²/4 = 45.4 cm²

For segment CD

A = πd₂²/4 = π(3 cm)²/4 = 7.1 cm²

For segment AD

A = πd₁²/4 = π(7.6 cm)²/4 = 45.4 cm²

Calculate the length L for each segment

We can calculate the length L for each segment using the given dimensions.

For segment BD:

L = L₁/2 = 6 m/2 = 3 m

For segment CD:

L = L₂ = 5 m

For segment AD:

L = L₁/2 = 6 m/2 = 3 m

Calculate the deflection δ for each segment using the formula δ=NLAE:

For segment BD:

δBD = NLAE = (195 kN)(3 m)/(100 GPa)(45.4 cm²) = 0.0124 m

For segment CD:

δCD = NLAE = (55 kN)(5 m)/(100 GPa)(7.1 cm²) = 0.0392 m

For segment AD

δAD = NLAE = 0

Calculate the total deflection at point D:

The deflection at point D is equal to the sum of the deflections for each segment, i.e., δD = δBD + δCD + δAD = 0.0124 m + 0.0392 m + 0 = 0.0516 m.

Therefore, the deflection at point D is 0.0516 m.

To know more about deflection of rod:

https://brainly.com/question/30887198

#SPJ4

--The given question is incomplete, the complete question is given

"For a bar subject to axial loading, the change in length, or deflection, between two points A and Bis δ=∫L0N(x)dxA(x)E(x), where N is the internal normal force, A is the cross-sectional area, E is the modulus of elasticity of the material, L is the original length of the bar, and x is the position along the bar. This equation applies as long as the response is linear elastic and the cross section does not change too suddenly.

In the simpler case of a constant cross section, homogenous material, and constant axial load, the integral can be evaluated to give δ=NLAE. This shows that the deflection is linear with respect to the internal normal force and the length of the bar.

In some situations, the bar can be divided into multiple segments where each one has uniform internal loading and properties. Then the total deflection can be written as a sum of the deflections for each part, δ=∑NLAE.

The circular rod shown has dimensions d1 = 7.6 cm , L1 = 6 m , d2 = 3 cm , and L2 = 5 m with applied loads F1 = 140 kN and F2 = 55 kN . The modulus of elasticity is E = 100 GPa . Use the following steps to find the deflection at point D. Point B is halfway between points A and C.

Segment the rod

For the given rod, which segments must, at a minimum, be considered in order to use δ=∑NLAE to calculate the deflection at D?"--

Each label should be dragged to the correct location on the table as shown below.

In Mathematics and Statistics, a frequency table can be used for the graphical representation of the frequencies or relative frequencies that are associated with a categorical variable or data set.

Assuming approximately 24% of the customers that were surveyed have a scone with their tea while approximately 36% of the customers surveyed bought a muffin, the column and row headings of the frequency table should be completed as follows;

                 Scone         Muffin        Cookie       Total_

Coffee        40                100             110             250

Tea             120               80              50             250_

Total           160               180            160             500

Read more on frequency table here: brainly.com/question/20744563

#SPJ4

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

The parameterization of the ellipse in a counterclockwise manner is x = 3cos(t) y = 2sin(t) where t varies from 0 to 2π.

One common way to parameterize an ellipse is to use trigonometric functions such as sine and cosine. We can write the equation of the ellipse as:

4x² + 9y² = 36

We can then use the following parameterization:

x = 3cos(t) y = 2sin(t)

where t is the parameter that varies between 0 and 2π, traversing the ellipse once in a counterclockwise manner.

To see why this parameterization works, let's substitute x and y into the equation of the ellipse:

4(3cos(t))² + 9(2sin(t))² = 36

Simplifying this equation gives:

36cos²(t) + 36sin²(t) = 36

Which is true for any value of t. This shows that our parameterization does indeed describe the ellipse 4x² + 9y² = 36.

Furthermore, we can see that when t=0, we get x=3 and y=0, which is the starting point (3,0). As t varies from 0 to 2π, x and y will trace out the ellipse exactly once in a counterclockwise manner.

Therefore, the parameterization of the ellipse 4x² + 9y² = 36 that begins at the point (3,0) and traverses once in a counterclockwise manner is:

x = 3cos(t) y = 2sin(t)

where t varies from 0 to 2π.

To know more about parameterization here

https://brainly.com/question/14762616

#SPJ4

The student will have $6,500 after 15 weeks.

The initial deposit is $5,000 and the weekly automatic deposit is $100. Let x be the total amount of money the student will have after 15 weeks.

Therefore, the equation that represents the total amount of money the student will have is:x = $5,000 + $100(15)

Since the question wants to know the total amount of money the student will have after 15 weeks,

we simply substitute the value of 15 for the weeks in the equation.

x = $5,000 + $100(15)

x = $5,000 + $1,500

x = $6,500

Therefore, the student will have $6,500 after 15 weeks.

To know more about substitute , visit

https://brainly.com/question/29383142

#SPJ11

According to the given a scholarship in 2018 for $400 and mom made you invest in a bank that pay 15% interest.  the money is worth $418 this year

Given: You won a scholarship in 2018 for $400 and mom made you invest in a bank that pays 15% interest.

To find: How much is that money worth this year?

Solution: We are given the amount and the rate of interest.

So, Principal (P) = $400

Rate of Interest (R) = 15%

= 0.15

Time (T) = (2021-2018)

= 3 years

We know, Simple Interest (SI) = (P×R×T)/100

Substituting the values in above formula,

SI = (400 × 0.15 × 3)/100S

I = $18

Total amount after 3 years = Principal + Simple Interest

= $400 + $18

= $418

Hence, the money is worth $418 this year

To know more about rate of interest. visit :

https://brainly.com/question/28272078

#SPJ11

The relation s on the set of real numbers is an equivalence relation.

To prove that s is an equivalence relation on R, we must show that it satisfies the three properties of an equivalence relation: reflexivity, symmetry, and transitivity.

Reflexivity: For any real number x, x - x = 0, which is an integer. Therefore, x is related to itself by s, and s is reflexive.

Symmetry: If x and y are real numbers such that x - y is an integer, then y - x = -(x - y) is also an integer. Therefore, if x is related to y by s, then y is related to x by s, and s is symmetric.

Transitivity: If x, y, and z are real numbers such that x - y and y - z are integers, then (x - y) + (y - z) = x - z is also an integer. Therefore, if x is related to y by s and y is related to z by s, then x is related to z by s, and s is transitive.

Since s satisfies all three properties of an equivalence relation, we conclude that s is indeed an equivalence relation on R.

Learn more about equivalence relation here

https://brainly.com/question/13098676

#SPJ11

Based on the given information, we can conclude that there is a statistically significant but weak positive relationship between variables A and B.

The correlation coefficient of .12 indicates a positive relationship, but the fact that it is closer to 0 than 1 suggests that the relationship is not very strong.

The significance level of p < .01 means that there is less than a 1% chance of the observed correlation occurring by chance alone.

Therefore, we can be confident that there is some true relationship between A and B, but it is important to note that correlation does not necessarily imply causation.

In other words, we cannot conclude that variable A causes variable B based on this correlation alone.

It is possible that there is a third variable or set of variables that is influencing both A and B.

Further research and analysis would be needed to establish causation.

Overall, we can conclude that there is a statistically significant but weak positive relationship between A and B, but we cannot determine causation based on this information alone.

Know more about variables   here:

https://brainly.com/question/28248724

#SPJ11

If the null space of a 9x4 matrix A is 3-dimensional, the dimension of the row space of A is 1.

If the null space of a 9x4 matrix A is 3-dimensional, the dimension of the row space of A can be found using the Rank-Nullity Theorem.

The Rank-Nullity Theorem states that for a matrix A with dimensions m x n, the sum of the dimension of the null space (nullity) and the dimension of the row space (rank) is equal to n, which is the number of columns in the matrix. Mathematically, this can be represented as:

rank(A) + nullity(A) = n

In your case, the null space is 3-dimensional, and the matrix A has 4 columns, so we can write the equation as:

rank(A) + 3 = 4

To find the dimension of the row space (rank), simply solve for rank(A):

rank(A) = 4 - 3
rank(A) = 1

So, if the null space of a 9x4 matrix A is 3-dimensional, the dimension of the row space of A is 1.

To know more about null space refer here:

https://brainly.com/question/17215829

#SPJ11

To analyze the test results, we need to determine the p-value associated with the test statistic value of 2.01. Since the alternative hypothesis is µ > 75, we are conducting a one-sided test.

To find the p-value, we look up the critical value corresponding to the significance level α (usually set at 0.05 or 0.01) in the appropriate distribution table (e.g., standard normal distribution table).

Alternatively, we can use statistical software or calculators to calculate the p-value directly. In this case, with a test statistic value of 2.01, we calculate the area under the curve to the right of 2.01 in the standard normal distribution.

The p-value represents the probability of observing a test statistic as extreme as 2.01 or more extreme under the null hypothesis. If the p-value is smaller than the chosen significance level (e.g., 0.05), we reject the null hypothesis. Otherwise, if the p-value is greater than the significance level, we fail to reject the null hypothesis.

Without the specific p-value or significance level, we cannot determine the conclusion of the hypothesis test based solely on the test statistic value of 2.01.

Learn more about hypothesis here: brainly.com/question/32386524

#SPJ11