1. The modulating signal is [tex]m(t) = 12 cos(21 8800 t) + 12 cos(2\pi 7200 t)[/tex].
2. Amax = 24 and Amin = 12, m = 0.25.
3. The sideband frequencies = the sum and difference of carrier and modulating frequencies.
4. The power in sidebands & power of carrier is 4.32 & 576
1. The carrier wave is highest frequency cosine term: [tex]24 cos(21 8000 t)[/tex].
The modulating signal is the sum of the other two cosine terms, which is [tex]m(t) = 12 cos(21 8800 t) + 12 cos(2\pi 7200 t).[/tex]
2. The modulation index can be calculated using the formula:
[tex]m = (Amax - Amin) / (Amax + Amin).[/tex] m = 0.25.
3. The sideband frequencies can be calculated as the sum and difference of the carrier and modulating frequencies.
4. The power in the sidebands can be calculated using the formula [tex]P(sidebands) = (m^2 / 2) * P(c)[/tex].
[tex](24)^2 = 576[/tex].
Using the modulation index m = 0.25, P(sidebands) = 4.32. The power in the carrier is P(c) = 576.
To know more about modulating signal, here
brainly.com/question/28391199
#SPJ4
A block of mass 0.5kg is pulled to the right with an applied force 3N at an angle 30 degrees above horizontal as shown. Ignoring friction, the acceleration of the block is...
A. 1.8
B. 3
C. 5.2
D. 6
The answer is C, 5.2
Who is farther from home at 4 minutes?
Answer:
lil's sister
hope this helps pls mark brainliest
Which of the following is a variable property for a gas? Select all that apply.
shape
mass
volume
density
Answer:
volume
Explanation:
mass density and shape are not variable to my view.
pressure volume
number of moles and temperature are variable
Blake strikes a punching bag with 80N of force for 0.05 seconds. John strikes a
punching bag with 60N of force for 0.1 second. Who delivers a greater amount of
impulse?
Answer:
So impulse= force × timeP1= 80N× 0.05 = 4 P2= 60N × 0.1= 6 Hence John delivers a greater impulse I do exams and quizzes if your interestedName some minerals used as gems.
Answer:
Minerals to Gemstones
Mineral Name Gemstone Name
Beryl Aquamarine, Beryl, Bixbite, Emerald, Goshenite, Heliodore, Morganite
Brazilianite Brazilianite
Chalcedony Agate, Aventurine, Bloodstone, Carnelian, Chrysoprase, Heliotrope, Jasper, Onyx, Sard
Chrysoberyl Alexandrite, Chrysoberyl
Each external force acts on the system for 10 seconds. Rank the change in momentum of each of the cart-cart systems from largest to smallest. (The label of “m” or “2 m” desginates the relative mass of each cart.)
It is possible to have some of the categories below BLANK since you may have items that are EQUAL to each other.
Put the largest as far up as you can, and the smallest as far down as you can
Answer:
thanks me later
PLEASS MARK ME AS BRAINLIEST ANSWER
Will clothes dry faster when they are folded or when they are not folded on the line?
Answer:
Not folded
Explanation:
how does a longshore current affect a beach?
Answer:
"Longshore currents are affected by the velocity and angle of a wave. When a wave breaks at a more acute (steep) angle on a beach, encounters a steeper beach slope, or is very high, longshore currents increase in velocity. ... This process, known as “longshore drift,” can cause significant beach erosion."
Credits to ocean service
Explanation:
Hope this helps
Physics mcq please be sure
Answer:
1. c 2.d
Explanation:
we did this in middle school
1. A stone is thrown upwards with an initial velocity of 25 m/s at angle of 30° to the ground a. Show that the vertical component if the velocity at the starting is 12.5 m/s upwards.
The vertical component of the velocity at the starting is 12.5 m/s upwards.
What is velocity?Velocity is the direction at which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time.
In kinematics, the area of classical mechanics that deals with the motion of bodies, velocity is a fundamental idea.
Given that stone is thrown upwards with an initial velocity of 25 m/s at angle of 30°.
Hence, the vertical component of the velocity in upward direction = 25 sin30° m/s
= 25 × 1/2 m/s
= 12.5 m/s.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ1
What is the displacement of a car in 50 s if it is travelling with a velocity of 25 m/s?
Answer:
v =25 m/s
time= 50 s
Velocity =Displacement/Time
Displacement = Velocity × Time
S = 25×50
s=1250m
Explanation:
v =25 m/s
time= 50 s
Velocity =Displacement/Time
Displacement = Velocity × Time
skills needed in agawang panyo
Answer:
they are;at first its teamwork,then agility and quick thinking
Some one plz help me I am so confused
Answer:
1. the attractive force that holds atoms or ions together
2. the average distance between the nucleus of two bonded atoms
3. the angle formed by two bonds to the same atom
Urea gets from body cells to the blood plasma by diffusion through the tissue fluid. Explain what this means?
Answer:
Glucose diffuse from the blood plasma, across the capillary walls to the tissue fluid, and then to the cell.
Glucose diffuse from the blood plasma, across the capillary walls to the tissue fluid, and then to the cell. The waste product urea diffuse from the cells of the liver to the tissue fluid, and then across the capillary walls into the blood plasma.
Alice pulls her wagon with a force of 75N. If the she pulls the wagon for 50 meters, how much work has she done?
Answer: W=75.50J
Explanation:
W=Fd
A wave hits an object as shown. A vertical line with Medium 1 to the left and Medium 2 to the right. An arrow from the left reaches the line. An arrow starts from the same point on the line and goes right at a different angle. Which kind of wave interaction is shown?
Answer:
refraction
Explanation:
When the wave moves from medium 1 to medium 2, then the wave gets refracted. Then the correct option is C.
What is the wave?A wave is an energetic disturbance in a medium that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electric or magnetic intensity, an electric potential, or a change in temperature are a few examples.
A wave is a dynamic disturbance of one or more variables that propagates in physics, geometry, and related sciences. When waves oscillate frequently around an equilibrium value at a certain frequency, they are said to be periodic.
The bending of waves as they go from one substance to another is known as wave refraction. It bends when the wave enters a new material because the wave's speed changes. The optical density or index of refraction of the material affects how light waves bend.
Thus, the correct option is C.
More about the wave link is given below.
https://brainly.com/question/29334933
#SPJ6
The missing options are given below.
absorption
diffraction
refraction
reflection
what different forms of energy are demonstrated by tv remote, flashlight, string lol ights, clock, and Toys
Answer:
I hope it helps you
Explanation:
please mark me as brainllest answer please
The biological levels of organization range from a single organelle all the way up to the biosphere in a highly structured hierarchy. Your lab partner is struggling to understand the interaction between the levels in the biological hierarchy. Using the model, what explanations can your offer to help your classmate? Choose ALL that apply.
A) R makes up Q which makes up P which makes up S.
B) Cells that work together make up tissues, which comprise organs.
C) Similar cells working together make up organs which make up organ systems.
D) In the model, the animal cells make up tissues such as muscle or connective tissue.
E) Organs, such as the stomach and intestines, make up organ systems which interact with one another to maintain homeostasis.
The model that depicts the concept of biological levels of an organization which is ranging from single organelle to biosphere is explained by all the options given except for options A and C.
Biology is specifically the study that deals with various forms of life. Since life is considered a vast topic, scientists classified this broad system into different organizational levels for better understanding.
The Biological levels of the organization are described as follows:
The biological level of organization of any living form is depicted and arranged from the simplest forms to the complex ones and thus, the order tends to start from organelles to the biosphere. The elaborated levels are in ascending order as organelles, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere respectively. Each level tends to combine with one another to give rise to the next level. One such example is that the cells that tend to work together make up the tissues, which further comprise the organs. Similarly, organ systems are formed by the interaction between certain organs in order to maintain homeostasis.
Considering all these facts, option C represents the statement that is incorrect as the cells cannot directly form organs without forming tissues and the letters in option A is not specific. And thus, we can conclude that except for options A and C, all the other options correctly depict the model of the Biological levels of the organization.
Learn more about the Biological levels of the organization here:
https://brainly.com/question/20702808
Will mark as brainliest !! plz answer it
Plzzz answer with explnation!!!
the value of acceleration due to gravity (g) will be maximum at:
.
a) 1/2 of the radius of earth
b) 1/4 of the radius of earth
c) 1/8 of the radius of earth
Which angle allows the soil to receive the most direct light from the lamp?
0 degrees
20 degrees
45 degrees
90 degrees
Answer:
D. 90 degrees
Explanation:
just finished lab
An instant soup is very low in fat and calories but high in sodium. Can this food be labeled “ healthy”?
Answer:
no
Explanation:
it is not healthy because sodium is not good to our body
No it is not healthy.
The following information should be considered:
The instant soup is the processed food and it have the expire time of about 6 months.If we make the soup homemade than it will be okay for only 1 or 2 foods. Also it is high in sodium.Learn more: brainly.com/question/17429689
A person does 15 J of work moving a couch 1.3 m. How much force was used?
Answer:
11.53 N.
Explanation:
Work = Force * Displacement
W= 15 J
D = 1.3
And now you solve for Force.
15= 1.3F
F= 11.53 N
work out
A rectangular block of mass 20 kg lies with a side 0.2m by 500cm on a tab
What is the pressure exerted by its weight on the table?
Explanation:
force/area=pressure
force=10*mass
area=0.2*500
pressure=200/100=2
Mary takes a trip to California for her vacation. Her airplane leaves Boston and flies 3,000 miles west, arriving in San Francisco 6 hours later. What was the plane’s velocity? Calculate and include proper units!
Answer:
two hr lead =90 miles
90/15=6hrs
2+6=8pm
Explanation:
13-1 LIVE
2, A rectangulv Container of base socmby 30cm is filled
with water to be depth of 5cm. how much is the pressure exerted
at the base? (take pw= 1000kg /m3 and g=10m/s)
Correct question is;
2, A rectangular Container of base 50 cm by 30cm is filled with water to be depth of 5cm. how much is the pressure exerted at the base? (take pw= 1000kg /m3 and g=10m/s)
Answer:
P = 500 N/m²
Explanation:
Pressure exerted at the base is the hydrostatic pressure and it is given by the formula;
P = ρgh
Where;
ρ is density = 1000 kg/m³
g = 10 m/s²
h is depth = 5 cm = 0.05 m
Thus;
P = 1000 × 10 × 0.05
P = 500 N/m²
Sound will travel slowest through which medium?
Assignments
1. A shopper pushes a grocery cart 20.0 m at constant speed on level ground, against a 35.0 N
frictional force. He pushes in a direction 25.0" below the horizontal. (a) What is the work done
on the cart by friction? (b) What is the work done on the cart by the gravitational force? (c)
What is the work done on the cart by the shopper? (d) Find the force the shopper exerts, using
energy considerations. (e) What is the total work done on the cart?
Hello there!
I hope you and your family are staying safe and healthy during this unprecendented time.
A) What is the work done?
Answer: We need to use the formula
[tex]w=-F_f(d)[/tex]
[tex]w=-(35)(20)[/tex]
[tex]w=-700J[/tex]
B) What is the work done on the cart by the gravitational force?
Alright, we know that the gravitional force is perpendicular to the diplacement. Therefore, we gonna use the following formula:
[tex]w=Fdcos90[/tex]
[tex]w=0[/tex]
C) What is the work done on the cart by the shopper?
This is the easier part, since we already know that the work done by the shopper is the same as the work done by the friction force
[tex]W shopper + W friction = 0\\W shopper = W-friction \\W shopper = 700J[/tex]
D) Find the force the shopper exerts, using energy considerations.
[tex]F_f+Fcos25=0\\-35+Fcos25=0\\F=38.6N[/tex]
E) What is the total work done?
You just need to add them:
[tex]w=wshopper+wfriction\\w=0[/tex]
The seed planted at extreme cold or in the region of frozen ice do not germinate, why?
Answer:
yes
The the seed planted at Extreme cold or in the region of frozen I did not germinate because the amount of moisture of the seed is too high which results in lack of air of the sea in the frozen ice
In fact, a soil temperature below 50°F might be problematic for many garden plants. Seeds will quickly absorb water at 40°C, but they won't begin to grow. This presents a risk for rot and disease, which may cause damping-off or subpar growth.
What is germination of seed?The formation of the seedling is the consequence of germination, which is often the growth of a plant inside a seed. It is also the process of the seed's metabolic machinery being reactivated, which causes the radicle and plumule to emerge. A vascular plant's seed is a little bundle that develops in a fruit or cone as the result of the union of the male and female reproductive cells.
Given the need for particular internal or external stimuli to resume growth, dormant seeds are viable seeds that do not germinate. When the right circumstances are present, the seed starts to germinate and the embryo starts to grow again, eventually becoming a seedling.
Learn more about germination here:
https://brainly.com/question/1675149
#SPJ2
Hello anyone I need the answer to this, thank you!
Answer:
yes
yes yes yes yes
yes yes yes
What characteristic is necessary for the uranium in a nuclear reactor?
Answer:
U-235
Explanation:
a rare needed compound