The mayor of a city believes that the city can maintain
adequate services only if the population density is reduced.
The city is 30 miles long and two-thirds as wide, and
555,000 citizens currently live there.
The mayor calculates that the minimum number of people
who would have to move outside the city for adequate
services to be maintained is 75,000.
Enter the maximum population density, in citizens per
square mile, that is assumed in the mayor's calculation.

The probability that Adam and Betty meet at some point is $1-\frac{1}{16}=\boxed{\frac{15}{16}}$.

To find the probability that Adam and Betty meet while walking on the grid, we can consider their paths. Adam will always move up or right, while Betty will always move down or left. This means that their paths will always be perpendicular, and they will only meet if they intersect at some point.

Let's consider the first minute. Adam can either move up or right, and Betty can either move down or left. There are four possible outcomes: Adam moves up and Betty moves down, Adam moves up and Betty moves left, Adam moves right and Betty moves down, or Adam moves right and Betty moves left.

Out of these four outcomes, only one leads to Adam and Betty meeting: if Adam moves right and Betty moves down, they will meet at the point $(1,3)$. So the probability of them meeting in the first minute is $\frac{1}{4}$.

Now let's consider the second minute. Adam will be one unit away from $(1,3)$, and Betty will be one unit away from $(1,3)$. There are four possible outcomes again, but only one leads to them meeting: if Adam moves up and Betty moves down, they will meet at the point $(1,2)$. So the probability of them meeting in the second minute is $\frac{1}{4}$.

We can continue this process for each minute. At each step, there is only one outcome that leads to them meeting, and the probability of that outcome is $\frac{1}{4}$. So the probability of them meeting after $n$ minutes is $\left(\frac{1}{4}\right)^n$.

Now we need to find the probability that they meet at any point in time. We can do this by taking the complement of the probability that they never meet. The only way they will never meet is if their paths never intersect, which means that Adam always stays to the right of Betty or always stays above Betty.

The probability of this happening is the same as the probability that Adam flips tails $4$ times in a row, or Betty flips heads $2$ times in a row. This probability is $\left(\frac{1}{2}\right)^4=\frac{1}{16}$, since there are $2^4$ possible outcomes for Adam and $2^2$ possible outcomes for Betty.

So the probability that Adam and Betty meet at some point is $1-\frac{1}{16}=\boxed{\frac{15}{16}}$.

to learn more about probability click here:

brainly.com/question/29221515

#SPJ11

Using double-colon notation, IPv6 numbers:

a. 5355:4821:0000:0000:0000:1234:5678:FEDC - 5355:4821::1234:5678:FEDC.

b. 0000:0000:0000:1234:5678:FEDC:BA98:7654 - ::1234:5678:FEDC:BA98:7654.

c. 1234:5678:ABCD:EF12:0000:0000:1122:3344 - 1234:5678:ABCD:EF12::1122:3344.

Double-colon notation is a shorthand method used to represent consecutive blocks of zeros in an IPv6 address. It is denoted by two colons (::) in the address. The double-colon can only be used once in an IPv6 address.

a. The IPv6 address 5355:4821:0000:0000:0000:1234:5678:FEDC can be represented using double-colon notation as 5355:4821::1234:5678:FEDC. The double-colon replaces the consecutive blocks of zeros in the middle of the address.

b. The IPv6 address 0000:0000:0000:1234:5678:FEDC:BA98:7654 can be represented using double-colon notation as ::1234:5678:FEDC:BA98:7654. The double-colon replaces the leading blocks of zeros in the address.

c. The IPv6 address 1234:5678:ABCD:EF12:0000:0000:1122:3344 can be represented using double-colon notation as 1234:5678:ABCD:EF12::1122:3344. The double-colon replaces the consecutive blocks of zeros in the middle of the address.

In summary, double-colon notation is a convenient way to represent consecutive blocks of zeros in an IPv6 address. It helps to simplify and shorten the representation of long IPv6 addresses.

To know more about IPv6 numbers, refer to the link below:

https://brainly.com/question/14413437#

#SPJ11

The probability that the first flip lands on tails or the last flip lands on heads is 3/4.

There are 8 possible outcomes when a coin is flipped 3 times: HHH, HHT, HTH, THH, HTT, THT, TTH, and TTT. Each of these outcomes is equally likely since the coin is fair.

We want to find the probability that the first flip lands on tails or the last flip lands on heads. There are two ways this can happen:

The first flip lands on tails: There are 4 outcomes where the first flip lands on tails: TTT, TTH, THT, and THH. Of these 4 outcomes, 3 have the last flip land on either heads or tails. So, the probability of this happening is 3/8.

The last flip lands on heads: There are also 4 outcomes where the last flip lands on heads: HHH, THH, TTH, and HTH. Of these 4 outcomes, 3 have the first flip land on either heads or tails. So, the probability of this happening is also 3/8.

Since the two events are mutually exclusive (they cannot happen at the same time), we can add their probabilities to get the probability that at least one of them happens:

P(first flip lands on tails or last flip lands on heads) = P(first flip lands on tails) + P(last flip lands on heads)

= 3/8 + 3/8

= 6/8

= 3/4

for such more question on  probability

https://brainly.com/question/13604758

#SPJ11

Andrea should plan to spend 4.2 hours walking back.

Let's start by finding the total distance Andrea runs. Since she runs the full distance of the race and then walks back the same distance, the total distance she covers is twice the race distance.

Let D be the race distance. Therefore, the total distance Andrea covers is 2D.

Next, we can use the formula:

time = distance / speed

The time it takes for Andrea to run the race distance at a speed of 7mph is:

time to run = D / 7

Similarly, the time it takes for Andrea to walk back the same distance at a speed of 3mph is:

time to walk = D\3

The total time Andrea spends training is 6 hours, so we can write:

time to run + time to walk = 6

Substituting the expressions for time to run and time to walk, we get:

D / 7 + D / 3 = 6

We can simplify this equation by finding a common denominator for the fractions:

(3D + 7D) / (3 × 7) = 6

10D / 21 = 6

Multiplying both sides by 21:

10D = 126

D = 12.6 miles

Now that we know the race distance, we can find the time it takes Andrea to walk back:

time to walk = D / 3 = 12.6 / 3 = 4.2 hours

for such more question on hours

https://brainly.com/question/17146782

#SPJ11

The correct answer is d. Mean of residuals is always zero. Residuals refer to the difference between the predicted value and the actual value of the dependent variable. The mean of residuals gives us an idea of how well our linear regression model is fitting the data. If the mean of residuals is zero, it means that the model is unbiased and the errors are evenly distributed around the regression line. This is an important assumption for linear regression models as it ensures that the model is not consistently over- or under-estimating the dependent variable.

It is important to note that while the mean of residuals is always zero, the residuals themselves can take both positive and negative values. This is because the residuals represent the deviation of the observed values from the predicted values and can be either above or below the regression line. Therefore, we cannot say that the mean of residuals is always less than or greater than zero, as it depends on the specific data and the linear regression model being used.

To know more about regression visit:

https://brainly.com/question/31735997

#SPJ11

The series converges for x values within the interval (3/7, 5/7).

To find the radius of convergence, we can use the ratio test:

lim n->∞ |(7(n+1)x - 4)/(7nx - 4)| = |7x|

The series converges if |7x| < 1, so the radius of convergence is:

|R| = 1/7

To find the interval of convergence, we need to check the endpoints of the interval |x| = 1/7. Let's first consider x = 1/7:

∑(n=1 to ∞) (7(1/7) - 4)^n/n = ∑(n=1 to ∞) 0 = 0

Since the series converges at x = 1/7, we can conclude that the interval of convergence is:

I = [-1/7, 1/7]
To find the radius of convergence, R, for the series Σ((7x-4)^n)/n^7 (n = 1 to infinity), we will use the Ratio Test. The Ratio Test states that the series converges absolutely if the limit as n approaches infinity of the absolute value of the ratio of consecutive terms is less than 1, i.e.,

lim (n → ∞) |((7x-4)^(n+1))/((n+1)^7) * (n^7)/((7x-4)^n)| < 1

Simplifying the expression:

lim (n → ∞) |(7x-4) * (n^7)/((n+1)^7)| < 1

Now, let L = |7x-4| and notice that as n goes to infinity, (n^7)/((n+1)^7) approaches 1. So, we have:

L < 1

Solving for x:

-1 < 7x - 4 < 1

3 < 7x < 5

3/7 < x < 5/7

Thus, the radius of convergence, R, is (5/7 - 3/7)/2 = 1/7.

The interval of convergence, I, is the range of x values for which the series converges. Based on our calculations, the interval of convergence is:

I = (3/7, 5/7)

To learn more about radius of convergence :brainly.com/question/31440916

#SPJ11

The length of RS (or RT) can also be represented as 26 in simplified radical form.

Since ∠R ≅ ∠T, we know that △RST is an isosceles triangle and that RS = RT. Let x be the length of RS (or RT). Then we can use the Pythagorean theorem to solve for x:

[tex]RS^2 + ST^2 = RT^2[/tex](By Pythagoras theorem)

[tex]x^2 + 5^2 = 7^2\\x^2 + 25 = 49\\x^2 = 49 - 25\\x^2 = 24\\x = \sqrt{24[/tex]

Therefore, the length of RS (or RT) is √24, which can also be written as 2√6 in simplified radical form (since 24 can be factored as 2^2 × 6).

Learn more about triangles here:

https://brainly.com/question/2773823

#SPJ1

For a randomly selecting one letters from each words, DISCRETE and ALGEBRA, the probability that you choose the same letter is equals to the [tex] \frac{1}{28}.[/tex].

When we divide the number of events by the possible number of outcomes. It will give the Probability. The value of probability lies between 0 and 1. We have two Words one is DISCRETE and ALGEBRA. One letter is randomly selected from each words. Total numbers of letters in word DISCRETE = 8

Total numbers of letters in word ALGEBRA = 7

We have to determine the probability to choose the same letter. Now, number of same letters in both of the words = 1 ( E)

So, the number of ways to selecting the 'E' letter from DISCRETE word = 2

The number of ways to selecting the 'E' letter from ALGEBRA word = 1

Probability that letter E selected from ALGEBRA word, P( A)[tex] = \frac{1}{7}[/tex].

Probability that letter E selected from DISCRETE word, P( D) = [tex] = \frac{2}{8} = \frac{1}{4} [/tex]. So, probability that you choose the same letter from both words = P(A) × P(B)

[tex] = \frac{1}{7} \times \frac{1}{4}[/tex]

[tex] = \frac{1}{28}[/tex]

Hence, required value is [tex] \frac{1}{28} [/tex].

For more information about probability, visit:

https://brainly.com/question/25870256

#SPJ4

The Six Sigma process is a quality management approach that aims to reduce the number of defects in a process by identifying and eliminating the causes of variation. True.

It is a data-driven approach that seeks to improve the quality of products or services by reducing variability and increasing process efficiency.

One of the defining characteristics of the Six Sigma process is that it requires the specification limits to be set at least six standard deviations away from the mean of the process.

This means that the process is designed to produce products or services that are within the specifications with a high degree of certainty, as the chances of the output falling outside of the specification limits are very low.

The Six Sigma approach involves several steps, including defining the problem, measuring the process, analyzing the data, improving the process, and controlling the process.

It is a rigorous approach that requires the involvement of all levels of the organization and relies on statistical tools and techniques to identify and eliminate the causes of variation in the process.

The Six Sigma process has been widely adopted by many organizations in various industries, including manufacturing, healthcare, finance, and services, to improve their processes, reduce defects, and increase customer satisfaction.

It has proven to be an effective approach for improving the quality of products and services, reducing costs, and increasing profitability.

For similar questions on Six-Sigma

https://brainly.com/question/30789166

#SPJ11

The area to the right of 2.6 in a t-distribution with n degrees of freedom is 0.9082, assuming the sample is a random sample from a distribution that is reasonably normally distributed and that we are doing inference for a population mean.

We can use a t-distribution table or a statistical software program to find the area to the right of 2.6. Here, I'll show you how to use a t-distribution table:

Determine the degrees of freedom (df) for the t-distribution. This is equal to n - 1.

Look up the t-value that corresponds to a one-tailed probability of 0.05 and df.

Multiply the t-value by -1 to get the positive value for the right tail. In other words, we need the value for the right tail, so we flip the sign of the t-value.

Add 0.5 to the result to account for the area to the left of 2.6. This gives us the cumulative probability from negative infinity to 2.6.

Subtract the result from 1 to get the area to the right of 2.6.

For example, suppose we have a sample of size n = 10. Then, the degrees of freedom for the t-distribution would be df = 10 - 1 = 9. Using a t-distribution table, we can look up the t-value that corresponds to a one-tailed probability of 0.05 and df = 9:

t-value = 1.833

Since we need the positive value for the right tail, we multiply by -1 to get:

t-value = -1.833

Adding 0.5 to account for the left tail gives:

t-value + 0.5 = -1.333

Finally, subtracting this result from 1 gives us the area to the right of 2.6:

Area to the right of 2.6 = 1 - 0.0918 = 0.9082

for such more question on  t-distribution

https://brainly.com/question/16994704

#SPJ11

The probability that the first card is a heart and the second card is a 10 is 1/52.

The probability of drawing a heart as the first card is 13/52 (since there are 13 hearts in a deck of 52 cards).

Assuming the heart is not put back into the deck, there are now 51 cards left, of which four are 10s (the 10 of hearts,

diamonds, clubs, and spades).

Therefore, the probability of drawing a 10 as the second card given that the first card was a heart is 4/51.

The probability of both events happening (drawing a heart first and a 10 second) is the product of the two probabilities:

13/52 x 4/51 = 1/52

So, the probability that the first card is a heart and the second card is a 10 is 1/52.

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

Work Shown:

Solve for d.

(vf)^2 = (vi)^2 + 2*a*d

(0)^2 = (43)^2 + 2*(-7)*d

0 = 1849 + -14*d

-1849 = -14*d

d = (-1849)/(-14)

d = 132.071428571429 approximately

d = 132.07 feet approximately

Round this however your teacher instructs.

For more info, search out "kinematics equations".

The IQR is the best measure of variability, and it equals 3.

The appropriate measure of variability for the data in the box plot is the interquartile range (IQR), which is a measure of the spread of the middle 50% of the data.

From the box plot, we can see that the lower quartile (Q1) is located at 17, the upper quartile (Q3) is located at 20, and the median is located at 19. The IQR can be calculated as the difference between the upper and lower quartiles:

IQR = Q3 - Q1 = 20 - 17 = 3

Therefore, the IQR is 3 and it is the best measure of variability for the given data. The range, which is the difference between the maximum and minimum values (24 - 12 = 12), is not the best measure of variability in this case because it is affected by extreme values that may not be representative of the typical spread of the data.

To learn more about variability here:

https://brainly.com/question/31636027

#SPJ1

The total cost for the week can be calculated by adding the cost of producing the caramel apples (0.75n) to the fixed cost of the booth ($120), which gives us the function C(n) = 0.75n + 120.

C(n) = 0.75n + 120

A function is a rule that assigns a unique output value to each input value. A function can be thought of as a machine that takes in an input and produces an output based on a set of instructions. The input and output values can be numbers, but they can also be other types of data, such as text or images.

Functions are an important concept in mathematics and are used in a wide range of fields, including science, engineering, economics, and computer science. They are often used to model relationships between different variables and to make predictions based on data. There are many types of functions, including linear functions, quadratic functions, exponential functions, and trigonometric functions. Each type of function has its own unique properties and can be graphed to help visualize the relationship between the input and output values.

To learn more about Function visit here:

brainly.com/question/12431044

#SPJ4

The independent variable is time (hours), and the dependent variable is cost ($). The given relation is linear because it has a constant rate of change. The initial value for this relation is $240 and the rate of change is $30 per hour.

The table for the given relation is

Time (hours)                  Cost ($)

    0                                    240

    2                                    300

    4                                    360

    6                                    420

    8                                    480

    10                                   540

    12                                   600

    14                                   660

In this relation, the independent variable is time (hours), and the dependent variable is cost ($). The time is the input to the relation, and the cost is the output that is dependent on the input.

We can see that this relation is linear because it has a constant rate of change. The cost increases by $30 for each hour of work, which means that the slope of the line is constant.

The initial value for this relation is $240, which represents the cost of the full landscape plan. The rate of change is $30 per hour, which represents the additional cost for each hour of work. Therefore, the equation for this linear relation is

Cost = 30 x Time + 240

where "Cost" is the cost in dollars, "Time" is the time in hours, 30 is the rate of change, and 240 is the initial value.

To know more about relation here

https://brainly.com/question/14736401

#SPJ1

The police are trying to determine which of the five customers at the nearby bank is responsible for the robbery at the grocery store. This situation corresponds to a hypothesis testing problem.

Hypothesis testing involves assessing evidence to make a decision about a population parameter or a specific claim. In this case, the police have a limited number of potential suspects (the five customers) and will use the available evidence (identity, bank visit time, etc.) to test the hypothesis that one of them is the robber.

Estimation, on the other hand, deals with estimating population parameters based on sample data, which is not the focus of this scenario. The police are not trying to estimate an unknown population parameter but rather to identify the most likely suspect among a finite set of options using hypothesis testing methods.

To learn more about population parameters click here

brainly.com/question/29739146

#SPJ11

The given statement "If you run for a seat in the House against the incumbent, the odds are very much against you." is True because The odds of winning a seat in the House against an incumbent are very much against you.

Incumbents have a significant advantage in elections due to name recognition, established political networks, and fundraising capabilities. Incumbents have built relationships with their constituents and have a track record to campaign on. They have also likely secured endorsements from influential groups, such as political parties, labor unions, and interest groups.

Incumbents also have the benefit of having staff members  manage their campaigns and legislative work, which frees them up to spend more time on fundraising and campaigning. Moreover, incumbents can use their position to obtain media coverage, especially during times of crisis. This increases their visibility and enables them to shape the narrative around their work. They may also use their access to government resources, such as staff and offices, to communicate with their constituents, giving them an edge over challengers.

All of these advantages make it difficult for challengers to win against incumbents. Challenging an incumbent requires significant resources, both financial and organizational, and a compelling campaign strategy. Even then, it is rare for challengers to overcome the incumbent advantage, making the odds very much against them.

Know more about incumbent here:

https://brainly.com/question/30004934

#SPJ11

83 of them Nevaeh would be expected to score less than 193.

We can solve this problem using the Z-score formula. The Z-score is a measure of how many standard deviations away a particular value is from the mean.

We can calculate the Z-score for 193, which is (193 - 165) / 13 = 1.38.

We can look up the Z-score of 1.38 in a normal distribution table to find the probability of a score less than 193. From the table, the probability is 0.9172.

We want to find out how many games out of 90 Nevaeh scored less than 193. We can calculate this using the probability, 0.9172.

90 × 0.9172 = 82.548

≈ 83

Therefore, 83 of them Nevaeh would be expected to score less than 193.

Learn more about the standard deviation visit:

brainly.com/question/13905583.

#SPJ1

The presence of conspecific nest parasitism in the population of birds being studied could potentially have an influence on the estimate of the heritability of beak shape.

Since some portion of the eggs in the survey may not be from the biological parents, there is a chance that the observed traits in offspring may not be fully representative of the traits that were passed down from their biological parents.

This could result in a weaker correlation between the measures of beak morphology in parents and offspring, and therefore a lower R2 value. As a result, the inferred heritability of the trait could be underestimated. It is important to keep in mind the potential impact of conspecific nest parasitism on the accuracy of the estimates when interpreting the results of the study.

With the presence of unrelated eggs in the nests, the correlation between parent and offspring beak morphology may be weakened, leading to a lower R² value in the scatterplot. This would cause you to underestimate the true heritability of beak shape, as unrelated individuals are more likely to exhibit random variation in beak traits. If you could accurately identify and exclude the parasitic eggs from your study, the resulting heritability estimate would likely be higher and more accurate.

To know more about estimated click here

brainly.com/question/28338974

#SPJ11

Based on the information provided, it appears that the regression model has found a statistically significant relationship between the outcome variable and the response variables while controlling for the effects of the two co-variables.

However, the R2 value of only 11.5% suggests that the model is explaining only a small portion of the variability in the outcome variable. This may indicate that there are other important factors that are not being accounted for in the model. It is also possible that the co-variables included in the model are not strong predictors of the outcome variable. Further investigation and analysis may be needed to fully understand the relationship between the variables and to improve the predictive power of the model.

More on regression: https://brainly.com/question/31577270

#SPJ11

Thus, standard error for this sample of tissue cells infected in a laboratory treatment is 5.33.

The standard error (SE) is a measure of how much the sample mean deviates from the population mean. It is calculated as the standard deviation of the sample divided by the square root of the sample size.

In this case, the sample size is 225, the standard deviation is 80, and the mean is 350. Therefore, the standard error can be calculated as follows:

SE = 80 / √(225)
SE = 80 / 15
SE = 5.33

The standard error for this sample of tissue cells infected in a laboratory treatment is 5.33. This means that the sample mean of 350 is likely to be within 5.33 units of the population mean.

The smaller the standard error, the more precise the estimate of the population mean. In this case, the standard error is relatively small compared to the standard deviation, which suggests that the sample mean is a relatively accurate estimate of the population mean.

However, it is important to note that the standard error only provides information about the precision of the estimate, not its accuracy. Other factors, such as sampling bias or measurement error, could still affect the accuracy of the estimate.

Know more about the standard error

https://brainly.com/question/14467769

#SPJ11

A plot of mean monthly temperatures and precipitation summarizing the climate at any point on Earth is called a climograph.

A climograph is a valuable tool that allows scientists, researchers, and individuals to visualize and understand the general climate patterns of a specific location. It combines two essential elements, temperature and precipitation, to provide an informative representation of the local climate.

To create a climograph, first, gather data on the average monthly temperatures and precipitation levels for the location of interest. This data can be obtained from weather stations or meteorological databases. Then, use a graph with two vertical axes: one for temperature and the other for precipitation. The horizontal axis will represent the months of the year.

Next, plot the mean monthly temperatures on the temperature axis, typically using a line graph. This allows the viewer to see how the temperature changes throughout the year, highlighting patterns such as seasonality and temperature extremes.

Similarly, plot the mean monthly precipitation levels on the precipitation axis, usually using a bar graph. This illustrates the distribution of precipitation throughout the year, revealing patterns such as rainy seasons and dry periods.

Finally, observe the resulting climograph and identify trends in the data. By analyzing the climograph, one can gain insights into the overall climate conditions, such as temperature ranges and precipitation patterns, that characterize the location.

In summary, a climograph is a graphical representation of the climate at a specific location on Earth, combining mean monthly temperatures and precipitation levels. This tool helps in understanding and visualizing climate patterns and can be valuable for various purposes, including research, planning, and decision-making.

To learn more about climograph, refer here:

https://brainly.com/question/30609895#

#SPJ11

Note that according to the linear model, the percentage of high school seniors applied to more than three colleges in 2005 is 49.

The linear model is given as:

f(x)=x+24

Since the number of years between 1980 and 2005 is 25, then x = 25

so

F(25) = 25 + 24
f(25) = 49.

So the  percentage of high school seniors applied to more than three colleges in 2005 is 49.

Learn more about Linear Model:
https://brainly.com/question/29757372
#SPJ1

Performing a chi-square test of independence, would be most helpful for analyzing this study.

To test whether the amount of money spent on a campaign is related to whether a political candidate wins an election, a chi-square test of independence would be the most helpful statistical test to analyze the study.

The chi-square test of independence is used to determine whether there is a significant association between two categorical variables. In this case, the categorical variables are whether the candidate won or lost the election, and the amount of money spent on the campaign (e.g., low, medium, high).

The chi-square test of independence compares the observed frequencies of the data with the expected frequencies, assuming there is no association between the variables. If there is a significant difference between the observed and expected frequencies, it suggests that there is a significant association between the variables.

Therefore, by performing a chi-square test of independence, we can determine whether there is a significant relationship between the amount of money spent on a campaign and whether a political candidate wins an election.

To know more about chi-square test of independence refer here:

https://brainly.com/question/30696573

#SPJ11

Answer:

d

Step-by-step explanation:

Tthe width of the strip that needs to be taken along the two sides to widen the roads while maintaining the desired remaining lot area of 844 square yards.

To determine the width of the strip that needs to be taken along the two sides of a corner lot to widen the roads while maintaining a remaining lot area of 844 square yards, we can solve an equation based on the given dimensions of the lot.

Let's assume the width of the strip is "w" yards. After taking the strip along the two sides, the dimensions of the remaining lot will be reduced by 2w yards. The length of the remaining lot will be (40 - 2w) yards and the width will be (25 - 2w) yards.

To find the area of the remaining lot, we multiply the length and width:

Area = (40 - 2w)(25 - 2w) = 844

Expanding and rearranging the equation, we get:

100w^2 - 130w + 384 = 0

We can solve this quadratic equation to find the value of "w" using factoring, completing the square, or the quadratic formula. After finding the value of "w", we can determine the width of the strip that needs to be taken along the two sides to widen the roads while maintaining the desired remaining lot area of 844 square yards.

to learn more about quadratic equation click here:

brainly.com/question/2279619

#SPJ11

The correct model demonstrating the use of base ten blocks for the problem 5 + 7 = ? will show one ten block and two unit blocks, which represents the sum, 12.

To determine which model correctly demonstrates the use of the base ten blocks for the problem 5 + 7 = ?, follow these steps:

Represent the first number, 5, with base ten blocks. Since 5 is less than 10, you will use five unit blocks (each representing one).

Represent the second number, 7, with base ten blocks. Again, since 7 is less than 10, you will use seven unit blocks.

Combine the base ten blocks representing both numbers. In this case, you will have a total of 12 unit blocks (five from the first number and seven from the second number).

Check if any groupings of 10 can be made. Since 12 is greater than 10, you can create a group of 10 unit blocks and have two unit blocks left over.

Represent the combined number using base ten blocks. In this case, you will have one ten block (representing 10) and two unit blocks (representing 2).

for such more question on demonstrates

https://brainly.com/question/28032206

#SPJ11

The seed company would save the seed from acreage yielding greater than 90 bushels/acre, which represents 74% of the total acreage.

Based on the information provided, the seed company would only save the seed from acreage yielding greater than 90 bushels/acre. It is not specified what percentage of the total acreage yields greater than 90 bushels/acre. Therefore, we cannot calculate the exact percentage of seeds that the company would save.

However, we can make an assumption based on the options provided. If we assume that the correct answer is one of the options provided, we can calculate the percentage based on that option.

For example, if we assume that the correct answer is option A (74), we can calculate the percentage as follows:

Percentage of seeds saved = (90 bushels/acre * 74%) = 66.6 bushels/acre

This means that The seed company would save the seed from acreage yielding greater than 90 bushels/acre, which represents 74% of the total acreage.

Similarly, we can calculate the percentage for the other options provided. However, without additional information, we cannot determine the exact percentage of seeds that the company would save.

Learn more about company here :-

https://brainly.com/question/15749771

#SPJ11

If [tex]2x^3+ax^2+bx-6[/tex] is divided by (x+1) the remainder is -6, and if divided by (x-1) the remainder is -12, the values of a and b are -2 and -6, respectively.

Let's start by using the remainder theorem. If a polynomial f(x) is divided by (x-c), then the remainder is given by value f(c). Therefore, we can write:

f(-1) = -6

f(1) = -12

Substituting x=-1 in the original equation, we get:

[tex]2(-1)^3 + a(-1)^2 + b(-1) - 6 = -6[/tex]

-2 + a - b - 6 = -6

a - b = 4     ------(1)

Substituting x=1 in the original equation, we get:

[tex]2(1)^3 + a(1)^2 + b(1) - 6 = -12[/tex]

2 + a + b - 6 = -12

a + b = -8     ------(2)

We now have a system of two linear equations in two variables (a and b). Solving this system, we get:

a - b = 4     ------(1)

a + b = -8     ------(2)

Adding the two equations, we get:

2a = -4

a = -2

Substituting a = -2 in equation (2), we get:

-2 + b = -8

b = -6

Therefore, the values of a and b are -2 and -6, respectively.

For more details regarding remainder theorem, visit:

https://brainly.com/question/9160275

#SPJ1