Answer:
1.12x10-10 or 0.63 ewan
Explanation:
Correct option is C)
The distance of centre of mass from carbon atom is,
xcm=m1+m2m1x1+m2x2
=12+1612×0+16×1.1
=0.63A˚
Thus, the centre of mass is 0.63A˚ from carbon atom.
The distance between a carbon atom and an oxygen atom in the co molecule is 0.63
What is the distance?Distance is the measurement of the farness of two objects from each other.
The distance between the molecules can be calculated by the given formula
[tex]xcm = m_1+m_2m_1\times 1+m_2 \times 2[/tex]
Putting the values in the equation
[tex]xcm = 12+1612 \times 0+16 \times 1.1 = 0.63 A^\circ[/tex]
Thus, the distance between a carbon atom and an oxygen atom in the co molecule is 0.63
Learn more about distance
https://brainly.com/question/15172156
#SPJ4
There is an extreme temperature difference between day and night in a desert during clear weather. However, even though the outside temperature drops greatly at night, the water in a swimming pool in the desert tends to remain warm. Use your knowledge of heat energy, specific heat, and heat transfer to explain these facts.
please help!!!!!!
Sand has a lower heat capacity hence it heats up easily and looses heat easily. On the other hand, water has a higher heat capacity and looses heat more slowly hence it remains warm at night.
What is heat transfer?The transfer of heat refers to the movement of heat from one body to another. We should note that sand has a low specific heat capacity hence it is rapidly heated up in the day and looses heat quickly at night.
On the other hand, water has a high specific heat capacity hence it heat up slowly and also does not loose heat easily even when the surrounding temperature is much colder. As such, there is an extreme temperature difference between day and night in a desert during clear weather and the water in a swimming pool in the desert tends to remain warm even when the outside temperature drops greatly at night.
Learn more about heat transfer: https://brainly.com/question/12107378
Which of these has an oxidation number of zero (0)? Cal2, Ca CaS, Ca3N2
Ca is the correct answer. Maybe
A 56kg skydiver jumps from the helicopter at
1524m from the ground. What is the jumper's potential energy?
The jumper's potential energy at a height of 1524 meters above the ground is equal to 836,371.2Joules.
Given the following data:
Mass of ball = 56 kilograms.Height = 1524 meters.Acceleration due to gravity = 9.8 [tex]m/s^2[/tex]How to calculate potential energy.Mathematically, potential energy is given by this formula:
[tex]P.E = mgh[/tex]
Where:
m is the mass.h is the height.g is acceleration due to gravity.Substituting the given parameters into the formula, we have;
[tex]P.E = 56 \times 9.8 \times 1524[/tex]
P.E = 836,371.2Joules.
Read more on potential energy here: https://brainly.com/question/1242059
3. How many moles of solute are present in a 2300 mL solution of 0.68 M MgSO.?
There are 1.56 moles of solute present in a 2300 mL solution of 0.68M MgSO4.
How to calculate number of moles?The number of moles of a substance can be calculated by using the following formula:
molarity = no. of moles / volume
According to this question, a volume of 2300 mL solution is contained in 0.68 M MgSO4. The number of moles is calculated as follows:
no of moles = 0.68M × 2.3
no. of moles = 1.56
Therefore, there are 1.56 moles of solute present in a 2300 mL solution of 0.68M MgSO4.
Learn more about moles at: https://brainly.com/question/12127540
what is not a molecule
Answer:
Single atoms of elements are not molecules.
Explanation:
A single oxygen, O, is not a molecule. When oxygen bonds to itself (e.g., O2, O3) or to another element (e.g., carbon dioxide or CO2), molecules are formed
Make a prediction about what will happen in this chemical reaction.
1. Add about 5 mL of Copper (II) sulfate solution into a small beaker.
2. Add a small bundle of steel wool (iron).
3. Leave to sit while you complete the rest of your reactions, but be sure to keep an
eye on this one throughout the lab.
Since iron is more reactive than copper, when steel wopl is placed in a solution of copper (II) sulfate solution into a small beaker, it dissolves and copper metal is produced.
What is a displacement reaction?A displacement reaction is one in which a more reactive element displaces another from its compound.
Reactive metals displace less reactive metals from their solutions.
Iron is a more reactive metal than copper and will displace copper from a solution of its salt.
Therefore, when steel wool is placed in a solution of copper (II) sulfate solution into a small beaker, the iron dissolves and copper metal is produced.
Learn more about displacement reactions at: https://brainly.com/question/14043577
A lot of energy is not stored in biomass, but is used for biological processes instead. Which process removes waste from the body? Give the scientific term.
We can confirm that the energy is being used for a biological process to remove waste known as excretion.
What is excretion?In biology, excretion is a metabolic process in which organisms discard waste and other by-products of metabolism. This process is essential for organisms to maintain homeostasis.
Therefore, we can confirm that energy is being used for a biological process to remove waste known as excretion.
To learn more about homeostasis visit:
https://brainly.com/question/9087319?referrer=searchResults
A mixture of h2 and water vapor is present in a closed vessel at 20.00°c. the total pressure of the system is 755.0 mmhg. the partial pressure of the water vapor 17.50 mmhg. what is the partial pressure of h2? type in your answer using the correct number of significant figures. mmhg
The partial pressure is the pressure exerted by a single gas in a volume of the mixture. The partial pressure of dihydrogen is 737.5 mmHg.
What is Dalton's law?According to Dalton's law, the sum of partial pressure of non-reacting gases gives the total pressure of the system.
Given,
Total pressure = 755.0 mmHg
The partial pressure of water = 17.5 mmHg
The partial pressure of dihydrogen = ?
The partial pressure of dihydrogen is calculated as:
[tex]\begin{aligned}\rm p_{total} &= \rm p_{H_{2}O} + p_{H_{2}}\\\\755.0 &=\rm 17.5 + p_{H_{2}}\\\\&= 737.5 \;\rm mmHg\end{aligned}[/tex]
Therefore, the partial pressure of dihydrogen is 737.5 mmHg.
Learn more about partial pressure here:
https://brainly.com/question/13960663
Answer:
737.5Explanation:
In the titration of 50. 0 mL of 0. 400 M HCOOH with 0. 150 M LiOH, how many mL of LiOH are required to reach the equivalence point
The volume of the 0.15 M LiOH solution required to react with 50 mL of 0.4 M HCOOH to the equivalence point is 133.3 mL
Balanced equationHCOOH + LiOH —> HCOOLi + H₂O
From the balanced equation above,
The mole ratio of the acid, HCOOH (nA) = 1
The mole ratio of the base, LiOH (nB) = 1
How to determine the volume of LiOH Molarity of acid, HCOOH (Ma) = 0.4 MVolume of acid, HCOOH (Va) = 50 mLMolarity of base, LiOH (Mb) = 0.15 MVolume of base, LiOH (Vb) =?MaVa / MbVb = nA / nB
(0.4 × 50) / (0.15 × Vb) = 1
20 / (0.15 × Vb) = 1
Cross multiply
0.15 × Vb = 20
Divide both side by 0.15
Vb = 20 / 0.15
Vb = 133.3 mL
Thus, the volume of the LiOH solution needed is 133.3 mL
Learn more about titration:
https://brainly.com/question/14356286
Why did mendeleev leave gaps in the periodic table?.
Answer:
Mendeleev left some gaps in his periodic table because he believed that in future more elements will be discovered.
Explanation:
"Mendeleev left gaps in his table to place elements not known at the time. By looking at the chemical properties and physical properties of the elements next to a gap, he could also predict the properties of these undiscovered elements."
An acetylene tank has a volume of 390.0 L. It is stored at a temperature of 23.5 °C and has a
pressure of 1765 kPa. How many moles of acetylene are in the tank?
Considering the ideal gas law, there are 279.42 moles of acetylene in the tank.
Definition of ideal gasIdeal gases are a simplification of real gases that is done to study them more easily. It is considered to be formed by point particles, do not interact with each other and move randomly. It is also considered that the molecules of an ideal gas, in themselves, do not occupy any volume.
Ideal gas lawAn ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of gases:
P×V = n×R×T
Moles of acetyleneIn this case, you know:
P= 1765 kPa= 17.4192 atm (being 101.325 kPa= 1 atm)V= 390 Ln= ?R= 0.082 [tex]\frac{atmL}{molK}[/tex]T= 23.5 °C= 296.5 K (being 0 °C= 273 K)Replacing in the ideal gas law:
17.4192 atm× 390 L = n×0.082 [tex]\frac{atmL}{molK}[/tex]× 296.5 K
Solving:
[tex]n=\frac{17.4192 atmx 390 L}{0.082 \frac{atmL}{molK}x296.5 L}[/tex]
n= 279.42 moles
Finally, there are 279.42 moles of acetylene in the tank.
Learn more about ideal gas law:
https://brainly.com/question/4147359
Which element cannot be the central atom of a lewis structure?.
Answer:
Hydrogen
Explanation:
Hydrogen can never be central atom despite its low electronegativity
SCIENCE- The Periodic Table of elements
help help
Answer:
hydrogen is the first in periodic table
A container with a volume 2.0 l is filled with a gas at a pressure of 1.5 atm. by decreasing the volume of the container to 1.0 l, what is the resulting pressure? type in your answer using the correct number of significant figures. remember to use the formula for boyle's law: p1v1 = p2v2 atm
Answer:
3.0 atm
Explanation:
got it right on edge after guessing 2 times
The resulting pressure of the gas after decreasing the initial volume is 3 atm.
What is Boyle's Law?According to the Boyle's Law at constant temperature, pressure of the gas is inversely proportional to the volume of the gas:
P ∝ 1/V
For the given question required equation is:
P₁V₁ = P₂V₂, where
P₁ = initial pressure = 1.5 atm
V₁ = initial volume = 2 L
P₂ = final pressure = ?
V₂ = final volume = 1 L
On putting all these values on the above equation, we get
P₂ = (1.5)(2) / (1) = 3atm
Hence required pressure is 3 atm.
To know more about Boyle's Law, visit the below link:
https://brainly.com/question/469270
Draw the alkyl bromide(s) you would use in a malonic ester synthesis of ethyl 2-methyl-4-pentenoate
The structure of the alkyl bromides used in a malonic ester synthesis of ethyl 2-methyl-4-pentenoate are as drawn in the attached image.
Ethyl 2-methyl-4-pentenoate by Malonic ester synthesis.The malonic ester synthesis is a chemical reaction characterized by the alkylation of diethyl malonate or a similar ester of malonic acid at the carbon alpha (directly adjacent) to both carbonyl groups, and subsequently converted to a substituted acetic acid.
Hence, it follows from the structure of Ethyl 2-methyl-4-pentenoate that the alkyl bromides used are Ethyl bromide and methyl bromide.
Read more on Malonic ester synthesis;
https://brainly.com/question/17237043
The structure of alkyl bromide that would be used in a malonic ester synthesis of ethyl 2-methyl-4-pentenoate are ethyl bromide and methyl bromide.
What is alkyl bromide?
When halogens such as Br, Cl, I, attched to the sp3 carbon atom of alkyl group, they called alkyl halides.
Here, bromide is attached to an alkyl group.
Ethyl bromide and methyl bromide are the alkyl halides used in synthesis of ethyl 2-methyl-4-pentenoate
Thus, ethyl bromide and methyl bromide are the alkyl bromides.
Learn more about alkyl bromide
https://brainly.com/question/14126879
#SPJ4
Which argument is correct
Answer:
The first agrument.
Explanation:
Because only heat can be transfered. Thats why if you put something hot in a refridgerator the heat energy will go off in the fridge and powers the cold energy. Im pretty sure this is right this is what my teachers tought me so i hope they right
Thermohaline circulation _______. a. supplies heat to polar regions b. causes salt lake formation c. causes oxbow lake formation d. is unaffected by heat fluctuations Please select the best answer from the choices provided A B C
Thermohaline circulation that occur in the ocean part that flows across sea surface help to supply heat to polar regions.
What is Thermohaline circulation?The thermohaline circulation refer to a section and region of the ocean circulation which is majorly driven by heat gradient and freshwater that flows across the sea surface and also from the mixture of heat and salt that occur at the inside part of the ocean.
Therefore, Thermohaline circulation help to supply heat to polar regions.
Learn more about thermohaline circulation here.
https://brainly.com/question/1176119
Generic Formula & Molecular Geometry of o3
Answer:
We use the following formula as given below Use the formula below to find the lone pair on the oxygen atom of the SO3 molecule. L.P (O) = V.E (O) – N.A (S-O) Lone pair on the terminal oxygen atom in SO3 = L.P (O)
Explanation:
Fe2O3 (s) +3CO (g) ----> 2Fe (l) + 3CO2 (g)
How many moles of Fe2O3 must react to produce 262 mol of Fe?
136 grams of barium sulfate is used to make a 2.5 M solution. How many liters of water are needed?
Answer:
yay well done good job keep going
The sum of the kinetic energies and potential energies of all of the molecules
in a substance is called the ___ energy of the substance.
Answer:
The sum of the kinetic energies and potential energies of all of the molecules in a substance is called the thermal energy of the substance.
Using the data below, what conclusion could you draw?
Car
Cara
Cars
Massi) Trial Time (3) Trial 2 Time(s).Trial 3 Time (s) Average Time (s)
15.5
4.7
49
47
4.8
20.2
3.3
2
3.1
28
79
59
5.6
5.8
Based on the data provided, the mass of the object is inversely proportional to acceleration and directly proportional to the time taken to cover the distance.
How does the mass of a object affect its acceleration?Given that the force applied on an object is constant, the acceleration of the object is inversely proportional to the mass of the object.
According to the Newton's second law of motion, the acceleration of an object is inversely proportional to the mass of the object and directly proportional to the force and takes place in the direction of the applied force.
Based on the data provided, the more mass the car has, the more time it takes to complete the distance.
Therefore, it can be concluded that the mass of the object is inversely proportional to acceleration and directly proportional to the time taken to cover the distance.
Learn more about mass and acceleration at: https://brainly.com/question/14344386
Elements has physical and chemical properties most similar to silicon?
Germanium (Ge) has properties that are similar to silicon.
Holly’s camp stove uses butane (C4H10). This fuel combusts in the presence of oxygen and forms water vapor and carbon dioxide as products. The enthalpy of this reaction is –2877.5 kJ per mole. Write the correct thermochemical equation for this reaction. What does this equation tell us about the reaction? How is a thermochemical equation different from other chemical equations?
Please help me! It is urgent!!
The thermochemical equation for the combustion of butane is:
C₄H₁₀(g) + 6.5 O₂(g) ⇒ 4 CO₂(g) + 5 H₂O(g) ΔH = -2877.5 kJ
It informs us of the entalphy of the reaction and it includes the states of aggregation.
What is a thermochemical equation?A thermochemical equation is a balanced stoichiometric chemical equation that includes the enthalpy change, ΔH.
Step 1: Write the balanced equation for the complete combustion of butane.C₄H₁₀ + 6.5 O₂ ⇒ 4 CO₂ + 5 H₂O
Step 2: Write the thermochemical equation.To the previous equation, we will add the enthalpy change and the states of agregation.
C₄H₁₀(g) + 6.5 O₂(g) ⇒ 4 CO₂(g) + 5 H₂O(g) ΔH = -2877.5 kJ
The thermochemical equation for the combustion of butane is:
C₄H₁₀(g) + 6.5 O₂(g) ⇒ 4 CO₂(g) + 5 H₂O(g) ΔH = -2877.5 kJ
It informs us of the entalphy of the reaction and it includes the states of aggregation.
Learn more about thermochemical equations here: https://brainly.com/question/16097779
What is the main chemical component present in striking surface of a matchbox?
A. Potassium chlorate
B. Phosphorus
C. Potassium
D. Graphite
Answer:
Phosphorus
Explanation:
Actually that's red Phosphorus
The matchstick contains potassium chlorate at topOn reaction between these when we slides them white Phosphorus is formed which burns the match sticksAnswer:
Option B. ( Phosphorus)
Explanation:
Here, we want to select the option which is the main component present in the striking surface of a matchbox
The correct choice here is phosphorus
Red phosphorus which is an allotrope of phosphorus finds use in this particular case. It is the main chemical component present in the striking surface of a matchbox.
Hope this helps!
If you have any queries please ask.
Complete and balance the equation for the reaction of sodium with water.
Na+_H2O+ H2
2Na + 2H2O → 2NaOH + H2
The balanced equation
Please help! How many isotopes are in arsenic?
Answer:
Arsenic (33As) has 33 known isotopes and at least 10 isomers.
Which acid should be stored in plastic containers rather than in glass ones?
Answer:
sulphuric acid and nitric acid
Explanation:
The acids that should be stored in plastic containers rather than in glass ones are hydrofluoric acid, phosphoric acid, sulfuric acid, etc.
What are acids?
Acids are those solutions that are sour in taste and have lower pH to 7.
Hydrofluoric acid is highly corrosive, made up of hydrogen and fluorine.
Phosphoric acid is an important oxygen of phosphorus.
Thus, the acids that should be stored in plastic containers rather than in glass ones are hydrofluoric acid, phosphoric acid, sulfuric acid, etc.
Learn more about acids
https://brainly.com/question/14072179
#SPJ4
An electric motor works by converting electrical energy to mechanical energy in order to create motion.
For example,Force is generated within the motor through the interaction between a magnetic field and winding alternating (AC) or direct (DC) current.
This works because…
An electric motor works by converting electrical energy to mechanical energy in order to create motion.
For example,Force is generated within the motor through the interaction between a magnetic field and winding alternating (AC) or direct (DC) current.
This works because…
Answer : When an electric current flows through the wire in the electromagnet, a magnetic field is produced in the coil.
[tex]\:\mathsf{Hope\:this\:helps\:you!}[/tex]
Answer:
when an electric current flows through the wire in the electromagnet , a magnetic field is produced in the coil .
Explanation:
Hope it's helpful for you .........For many Arrhenius acid base reactions (e.g., NaOH HCl, or KOH HNO3) the enthalpy change is the same regardless of which acid and which base are used. Why do you think this is so
Answer:
that's because
Explanation:
as far as my knowledge is concerned
HCl(g) + H2O ⇄ H3O+ (aq) + Cl– (aq)
or, more simply (and truer to the original theory):
HCl(g) ⇄ H+ (aq) + Cl– (aq) or HCl(aq)