The chemical formula of ethanol is C₂H5OH. So according to the question, the number of carbon atoms, it will be twice the number of molecules, So it will be two times 7.65 Times 10 to about 23.
How dangerous is ethanol?Intoxication with ethanol is frequent in older adolescents and adults. A child's toxic dose is 3 mg/dL, whereas an adult's hazardous dose is 5 mg/dL. Compared to adults, children are more likely to experience hypoglycemia after a single intake.
Why is the boiling point of ethanol so low?The boiling point of ethanol is relatively low. Water has a greater boiling temperature than ethanol because there is less hydrogen bonding between water molecules than between ethanol molecules, which requires less energy to vaporize.
To learn more about ethanol visit:
https://brainly.com/question/20107991
#SPJ1
help plssss!!!! i need this done by tonight!!!!
1. Using your knowledge of the Brønsted-Lowry theory of acids and bases, complete the following acid-base reactions and indicate each conjugate acid-base pair.
i. OH + HPO₂ → H₂O + H₂PO₄²⁻
The conjugate acid-base pair is OH/H₂O, HPO₂²⁻/H₂PO₄²⁻
2) Identify the conjugate acid-base pairs in the following reactions. Write A, B, CA, and CB below the appropriate substance.
i. HCO₃⁻ + NH₃ → NH₄⁺ + CO₃²⁻
The conjugate acid-base pair is HCO₃⁻/CO₃²⁻, NH₃/NH₄⁺
ii. HCI + H₂O → H₃O⁺ + Cl⁻
The conjugate acid-base pair is H₂O/OH⁻, HCI/Cl⁻, H₃O⁺/H₂O, Cl⁻/HCI
iii. CH₃COOH + H₂O → H₃O⁺ + CH₃COO⁻
The conjugate acid-base pair is CH₃COOH/CH₃COO⁻, H₂O/OH⁻, H₃O⁺/H₂O
iv. HOCI + NH₃ → NH₄⁺ + ClO⁻
The conjugate acid-base pair is HOCI/ClO⁻, NH₃/NH₄⁺
3. Write the formula for conjugate bases formed by the following acids.
i. HPO₄²⁻ → PO₄³⁻
ii. H₂O → OH⁻
iii. CN⁻ → HCN
iv. HOOC-COO⁻ → HOOCCOOH
4) Write the formula for conjugate acids formed by each of the following bases.
i. H₃O⁺ → H₂O
ii. HCN → H₂CN⁺
iii. NH₃ → NH₄⁺
5. Classify each of the following pH values as acidic, basic, or neutral.
10 - neutral1.5 - acidic7 - neutral7.5 - basic13 - basic1 - acidicLearn more about Conjugate base pairs here:
https://brainly.com/question/13336099
#SPJ1
If a gas occupies 4.76 L at 6.10 °C and 934 torr, what volume would it occupy at 24.0 °C and 670. torr?
Which gas law should you use?
The gas would occupy approximately 3.00 L at 24.0 °C and 670 torr.
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas at different conditions. The combined gas law is expressed as:
(P1 × V1) / (T1) = (P2 × V2) / (T2)
where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.
Using the given values, we can plug them into the equation and solve for V2:
(P1 × V1) / (T1) = (P2 × V2) / (T2)
(934 torr × 4.76 L) / (279.25 K) = (670 torr × V2) / (297.15 K)
Simplifying and solving for V2, we get:
V2 = [(934 torr × 4.76 L) / (279.25 K)] × (297.15 K / 670 torr)
V2 ≈ 3.00 L
For more question on gas click on
https://brainly.com/question/25736513
#SPJ11
SOMEONE PLEASEHELP!!!!!!! Using the graph to the right, answer the following questions:
1. What is the half-life of the radioactive isotope?
2. If someone had 4,000g of the sample remaining, how many half-lives has the sample gone through?
3. How many days would it take to have only 1,000g of the sample remaining?
^^^^show work!!!!!
The half-life of the radioactive isotope is 8 days.
Mass at 8 days = 8000 g
Number of half-lives in 4000 g = 8000 / 4000 = 2 half life
Time needed for 1000g to remain is 32 days.
The half life of a chemical reaction is the time required by the substance to reach half of its concentration. It is a characteristic property of the unstable atomic nuclei and the way in which they decay.
For a given reaction the half life of a reactant is the time required for its concentration to reach a value that is the arithmetic mean of its initial and final value. For a reactant that is entirely consumed it is the time taken for the reactant concentration to fall to one half of its initial value.
Learn more about Half life, here:
https://brainly.com/question/31666695
#SPJ1
Does anyone know the answer to this question
Answer:
A
Explanation:
If Hydrogen is H₂ There will be two silver
and is Carbon is C There will only be one gray
and if Oxygen is O₃ There will be three red
Suppose you were doing a titration where you start out with a basic solution of around 8.0 and you expect to keep adding an acid until the mixture has a pH of 3.0. Based on the indicator chart which pH indicator would be the best one to use. Describe the color change that would be observed
Based on the information regarding the titration, as the pH of the solution decreases, phenolphthalein will change color to pink.
How to explain the color changeThe best indicator to use for a titration where you start out with a basic solution of around 8.0 and you expect to keep adding an acid until the mixture has a pH of 3.0 is phenolphthalein.
Phenolphthalein is an indicator that changes color in the pH range of 8.3 to 10.0. In basic solutions, phenolphthalein is colorless. As the pH of the solution decreases, phenolphthalein will change color to pink. The color change will be observed at the equivalence point of the titration, which is the point at which the amount of acid added is equal to the amount of base present. At the equivalence point, the pH of the solution will be 7.0.
Learn more about titration on
https://brainly.com/question/186765
#SPJ1
how to synthesize tripropylamine from propylene
The reactions that result in the emission of light involve the ruthenium label and tripropylamine (TPA), two electrochemically active molecules.
Thus, The electrode surface inside the measurement cell is where the reactions take place.
The ruthenium label is oxidized at the electrode surface as an electrical potential is applied, and TPA is oxidized into a radical cation that spontaneously loses a proton.
When the resultant TPA radical interacts with oxidized ruthenium, the ruthenium label enters an excited state and emits a photon (620 nm) before decaying. The ruthenium label is renewed and ready to carry out numerous light-generating cycles as it goes back to its ground state.
Thus, The reactions that result in the emission of light involve the ruthenium label and tripropylamine (TPA), two electrochemically active molecules.
Learn more about tripropylamine, refer to the link:
https://brainly.com/question/32070784?
#SPJ1
Drag the tiles to the correct boxes to complete the pairs.
Match each decimal number to the correct scientific notation.
3.07 x 10-6
3.07 x 106
3.07 x 10-4
3.07 x 104
Answer:
Explanation:
The matching of each decimal number to the correct scientific notation is as follows:
3.07 x 10^-6 -> D) 3.07 x 10^-6
3.07 x 10^6 -> B) 3.07 x 10^6
3.07 x 10^-4 -> A) 3.07 x 10^-4
3.07 x 10^4 -> C) 3.07 x 10^4
So, the correct matching is:
D) 3.07 x 10^-6
B) 3.07 x 10^6
A) 3.07 x 10^-4
C) 3.07 x 10^4
if two magnets are placed on a table, which statement describes a situation with the most attraction between the two magnets
The north pole of one magnet is near the South pole of the other magnet.
The ends of a magnet are called its poles. One end is called the north pole, the other is called the south pole. If you line up two magnets so that the south pole of one faces the north pole of the other, the magnets will pull toward each other.
An ideal gas (which is is a hypothetical gas that conforms to the laws governing gas behavior) confined to a container with a massless piston at the top. (Figure 2) A massless wire is attached to the piston. When an external pressure of 2.00 atm
is applied to the wire, the gas compresses from 4.40 to 2.20 L. When the external pressure is increased to 2.50 atm , the gas further compresses from 2.20 to 1.76 L .
In a separate experiment with the same initial conditions, a pressure of 2.50 atm
was applied to the ideal gas, decreasing its volume from 4.40 to 1.76 L
in one step.
If the final temperature was the same for both processes, what is the difference between q for the two-step process and q for the one-step process in joules?
The difference between q for the two-step process and q for the one-step process is 220.38 joules.
To solve this problem, we use the first law of thermodynamics, which states that change in internal energy (ΔU) of system will be equal to the heat (q) added or removed from the system, minus the work (w) done by or on the system;
[tex]Δ_{U}[/tex] = q - w
For an ideal gas, the internal energy depends only on the temperature, so [tex]Δ_{U}[/tex] is zero if the final temperature is the same for both processes. Therefore, we can set [tex]Δ_{U}[/tex] to zero and solve for the difference in heat (q) between the two processes;
q(two-step) - q(one-step) = w(two-step) - w(one-step)
The work done by or on the gas can be calculated using the equation;
w = -P[tex]Δ_{V}[/tex]
where P is the external pressure, and [tex]Δ_{U}[/tex] is the change in volume. The negative sign indicates that work is done on the gas when it is compressed ([tex]Δ_{U}[/tex] < 0), and work is done by the gas when it expands ([tex]Δ_{U}[/tex] > 0).
For the two-step process, we can calculate the work done in two stages;
w(two-step) = -2.00 atm × (4.40 L - 2.20 L) - 2.50 atm × (2.20 L - 1.76 L)
= -3.32 atm L - 0.605 atm L
= -3.925 atm L
For the one-step process, we can calculate the work done in one step;
w(one-step) = -2.50 atm × (4.40 L - 1.76 L)
= -6.10 atm L
Substituting these values into the equation for the difference in heat, we get;
q(two-step) - q(one-step) = -3.925 atm L - (-6.10 atm L)
= 2.175 atm L
To convert this to joules, we need to multiply by the conversion factor for atm L to joules;
1 atm L = 101.3 J
Therefore; q(two-step) - q(one-step) = 2.175 atm L × 101.3 J/atm L
= 220.38 J
Therefore, the difference in heat between the two processes is 220.38 joules.
To know more about first law of thermodynamics here
https://brainly.com/question/3808473
#SPJ1
If you heat 400.0 grams of water in a pot on the stove from 20ºC to 99°C, how much heat did the water absorb?
The amount of heat absorbed by 400 grams of water from 20°C to 99°C is 132,214.4 J.
How to calculate heat?The amount of heat absorbed or released by a substance can be calculated using the following equation;
Q = mc∆T
Where;
Q = quantity of heat absorbed or releasedm = mass c = specific heat capacity∆T = change in temperatureAccording to this question, 400.0 grams of water is heated in a pot on the stove from 20ºC to 99°C. The amount of heat absorbed can be calculated as follows:
Q = 400 × 4.184 × {99 - 20}
Q = 132,214.4 J
Learn more about heat at: https://brainly.com/question/26322639
#SPJ1
Attached below! I need help for part B
The heat capacity of a system is defined as the amount of heat required to raise the temperature through 1°C. It is denoted by c. It is an extensive property. The mass of steel bar is 47.93 g.
Here the amount of heat taken by the steel rod is equal to the amount of heat lost by water. The heat required to raise the temperature of the sample of mass 'm' having specific heat 'c' is:
Q = c (T - T₀) m
Cs (Ts - T0s) ms = -Cw (Tw - T0w) mw
ms = - Cw (Tw - T0w) mw / Cs (Ts - T0s)
Mass of water = 110 mL × 1.00 g / mL = 110.00 g
ms = -4.18 J / g°C × (21 .10 - 22.00) 110.00 g / 0.452 J / g°C (21.10 - 2.00) = 47.93 g
To know more about heat capacity, visit;
https://brainly.com/question/29766819
#SPJ1
how to get N-methyl-4-(p-tolyldiazenyl)aniline from benzene and toluene
The synthesis of N-methyl-4-(p-tolyldiazenyl)aniline can be accomplished in a few steps, as outlined below:
Step 1: Nitration of toluene
Step 2: Reduction of p-nitrotoluene
Step 3: Diazotization of p-toluidine
Step 4: Coupling with N-methylaniline
Toluene is first nitrated to form p-nitrotoluene. This can be done by treating toluene with a mixture of nitric acid and sulfuric acid under controlled conditions. The reaction can be represented as follows:
Toluene + HNO3 → p-nitrotoluene + H2O
The p-nitrotoluene is then reduced to form p-toluidine, using a reducing agent such as iron and hydrochloric acid. The reaction can be represented as follows:
p-nitrotoluene + 6HCl + Fe → p-toluidine + 3H2O + FeCl3
The p-toluidine is then diazotized using nitrous acid to form the diazonium salt. The reaction can be represented as follows:
p-toluidine + HNO2 → p-tolyldiazonium chloride + H2O
The diazonium salt is then coupled with N-methylaniline to form N-methyl-4-(p-tolyldiazenyl)aniline. The reaction can be represented as follows:
p-tolyldiazonium chloride + N-methylaniline → N-methyl-4-(p-tolyldiazenyl)aniline + HCl
Overall reaction:
Toluene + HNO3 → p-nitrotoluene + H2O
p-nitrotoluene + 6HCl + Fe → p-toluidine + 3H2O + FeCl3
p-toluidine + HNO2 → p-tolyldiazonium chloride + H2O
p-tolyldiazonium chloride + N-methylaniline → N-methyl-4-(p-tolyldiazenyl)aniline + HCl
It is important to note that these reactions require careful handling and should only be attempted by individuals with proper training and experience in organic chemistry.
For more question on synthesis click on
https://brainly.com/question/30332351
#SPJ11
Gaseous butane (CH₂(CH₂)₂CH₂) will react with gaseous oxygen (O₂) to produce gaseous carbon dioxide (CO₂) and gaseous water (H₂O). Suppose 48. g of butane is mixed with 54.6 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Be sure your answer has the correct number of significant digits.
The maximum mass of carbon dioxide that could be produced by the chemical reaction is 46.2 g
How do i determine the mass of of carbon dioxide produced?First, we shall determine the limiting reactant. This obtained as follow
2CH₃(CH₂)₂CH₃ + 13O₂ -> 8CO₂ + 10H₂O
Molar mass of CH₃(CH₂)₂CH₃ = 58 g/molMass of CH₃(CH₂)₂CH₃ from the balanced equation = 2 × 58 = 116 g Molar mass of O₂ = 32 g/molMass of O₂ from the balanced equation = 13 × 32 = 416 gFrom the balanced equation above,
116 g of CH₃(CH₂)₂CH₃ reacted with 416 g of O₂
Therefore,
48 g of CH₃(CH₂)₂CH₃ will react with = (48 × 416) / 116 = 172.14 g of O₂
From the above calculation, we can see that a higher amount (i.e 172.14 g) of O₂ than what was given (i.e 54.6 g) is needed to react with 48 g of CH₃(CH₂)₂CH₃
Thus, the limiting reactant is O₂
Finally, we shall determine maximum mass of carbon dioxide, CO₂ produced. Details below:
2CH₃(CH₂)₂CH₃ + 13O₂ -> 8CO₂ + 10H₂O
Molar mass of O₂ = 32 g/molMass of O₂ from the balanced equation = 13 × 32 = 416 gMolar mass of CO₂ = 44 g/molMass of CO₂ from the balanced equation = 8 × 44 = 352 gFrom the balanced equation above,
416 g of O₂ reacted to produce 352 g of CO₂
Therefore,
54.6 g of O₂ will react to produce = (54.6 × 352) / 416 = 46.2 g of CO₂
Thus, the maximum mass of carbon dioxide, CO₂ produced is 46.2 g
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
Estimate the pH and Fraction (in terms of percentage) CH3COOH molecules deprotonated in 0.15 M CH3COOH
The pH of the 0.15 M [tex]CH_3COOH[/tex] solution is approximately 2.38. and around 2.9% of the [tex]CH_3COOH[/tex] molecules in the 0.15 M solution are deprotonated.
Acetic acid ([tex]CH_3COOH[/tex]) is a weak acid that only partially dissociates in water to form [tex]H^+[/tex] ions and [tex]CH_3COO^-[/tex] ions. To estimate the pH and fraction of [tex]CH_3COOH[/tex]molecules deprotonated in a 0.15 M [tex]CH_3COOH[/tex]solution, we can use the following equations and approximations:
The dissociation constant for acetic acid (Ka) is 1.8 x 10^-5.
The initial concentration of [tex]CH_3COOH[/tex] is equal to its concentration at equilibrium, since it only partially dissociates.
The concentration of [tex]H^+[/tex] ions is equal to the concentration of [tex]CH_3COO^-[/tex] ions at equilibrium, since the dissociation reaction involves a 1:1 ratio of [tex]H^+[/tex] ions to [tex]CH_3COO^-[/tex] ions.
Using these approximations, we can set up an equilibrium expression for the dissociation of [tex]CH_3COOH[/tex] :
[tex]Ka = [H^+][CH_3COO^-]/[CH_3COOH][/tex]
We also know that the initial concentration of [tex]CH_3COOH[/tex] is 0.15 M. Let x be the concentration of [tex]H^+[/tex] ions and [tex]CH_3COO^-[/tex] ions at equilibrium. Then:
[[tex]H^+[/tex]] = x
[[tex]CH_3COO^-[/tex]] = x
[[tex]CH_3COOH[/tex]] = 0.15 - x
Substituting these values into the equilibrium expression and solving for x, we get:
Ka = x^2 / (0.15 - x)
1.8 x 10^-5 = x^2 / (0.15 - x)
x = 0.0042 M
The pH can be calculated using the formula:
pH = -log[[tex]H^+[/tex]]
pH = -log(0.0042)
pH = 2.38
Therefore, the pH of the 0.15 M [tex]CH_3COOH[/tex] solution is approximately 2.38.
To estimate the fraction of [tex]CH_3COOH[/tex] molecules that are deprotonated, we can use the equation:
Fraction deprotonated = [tex][CH_3COO^-] / [CH_3COOH][/tex] x 100%
At equilibrium, the concentration of [tex]CH_3COO^-[/tex] ions is equal to the concentration of [tex]H^+[/tex] ions, which we calculated to be 0.0042 M. The concentration of [tex]CH_3COOH[/tex] at equilibrium is 0.15 - 0.0042 = 0.1458 M. Substituting these values into the equation, we get:
Fraction deprotonated = 0.0042 / 0.1458 x 100%
Fraction deprotonated = 2.9%
For more question on pH click on
https://brainly.com/question/172153
#SPJ11
Choose the equation below that is balanced correctly.
S8 +24 028 SO3
S8+ 12 0₂8 SO3
6 S8+8 026 SO3
2 S8 +3 022 SO3
The balanced equation for the reaction between sulfur (S₈) and oxygen (O₂) to form sulfur trioxide (SO₃) is 2S₈ + 16O₂ → 16SO₃.
What is the balanced chemical equation?Balancing chemical equations involves the addition of stoichiometric coefficients to the reactants and products.
The balanced equation for the reaction between sulfur (S₈) and oxygen (O₂) to form sulfur trioxide (SO₃) is determined as;
2S₈ + 16O₂ → 16SO₃
From the reactants side we can see that sulfur is 16 and also 16 in the product side. The number of oxygen in the reactant side is 32 and also 32 in the product side.
Thus, the balanced equation for the reaction between sulfur (S₈) and oxygen (O₂) to form sulfur trioxide (SO₃) is 2S₈ + 16O₂ → 16SO₃.
Learn more about balanced chemical equation here: https://brainly.com/question/26694427
#SPJ1
Part C
Close the simulation window for carbon dioxide and return to the Cool Molecules Explore page.
Next, click C and H in the periodic table and repeat the process for methane (CH₂). In the table below, record the names of its vibrational modes
and describe the vibration of the molecule in each mode. Also record the number of unique possible states for each mode.
Vibration Mode
Al stretch
E bend
T2 stretch
T2 bend
Number of States in the:
Mode
Description:
The vibrational modes and unique possible states for each mode are detailed in the table below.
What is the vibrational mode of a molecule?A vibrational mode of a molecule refers to a specific way in which the atoms inside a molecule can move relative to each other. Molecules are made up of atoms that are connected to each other by chemical bonds, and these bonds act like springs that can vibrate.
When a molecule absorbs energy, it can cause the bonds to stretch, bend, or twist in specific ways, creating different vibrational modes. The vibrational modes of a molecule can provide important information about its structure and chemical properties.
Find out more on vibrational modes here: https://brainly.com/question/30936396
#SPJ1
what is the density of a liquid that has a volume of 200 mL and a mass of 125 g.
Answer:
0.625g/mL
Explanation:
D=mass (grams) / Volume (mL or cm^3)
m=125g
V=200mL
D= 125g/200mL= 0.625g/mL
What is the change in temperature (AT) when a 25 g block of aluminum absorbs 10,000 J of heat?
The change in temperature (ΔT) when a 25 g block of aluminum absorbs 10,000 J of heat is approximately 44.32°C.
To calculate the change in temperature (T) that occurs when an aluminium block absorbs a certain quantity of heat, we must utilise the specific heat capacity of aluminium (c) and the equation:
Q = mcΔT
Where Q is the heat absorbed or released, m is the substance's mass, c is the substance's specific heat capacity, and T is the temperature change.
The specific heat capacity of aluminium is approximately 0.897 J/g°C.
Given that the aluminium block weighs 25 g and absorbs 10,000 J of heat, we can plug the following values into the equation:
(25 g) * (0.897 J/g°C) * T = 10,000 J
We can now solve for T:
T = 10,000 joules / [(25 g) * (0.897 J/g°C)]
ΔT ≈ 44.32°C
for more questions on temperature
https://brainly.com/question/4735135
#SPJ11
25g of NH3 is mixed with 4 mole of O2 is the given reaction
a.which is the limiting reaction
b.what mass of no is formed
c.what mass of h2o is formed
Whoever wrote that basic answer to my chemistry question that is NOT the complex equation. One of the reactants is [Cu(OH2)6]^2+
so what's the rest of the equation?
Here is the balanced chemical equation for the reaction involving [tex][Cu(OH_2)_6]^{2+}:[/tex]
[tex][Cu(OH_2)_6]^{2+} + 4Cl^- = [CuCl_4]^{2-} + 6H_2O[/tex]
In this reaction, [tex][Cu(OH_2)_6]^{2+}[/tex] is a complex ion of copper(II) that reacts with chloride ions to form the complex ion [tex][CuCl_4]^{2-}[/tex] and water molecules.
The balanced equation indicates that for every one mole of [tex][Cu(OH_2)_6]^{2+[/tex] that reacts, four moles of chloride ions are required and two moles of [tex][CuCl_4]^{2-[/tex] and six moles of water are produced.
A balanced chemical equation is a written representation of a chemical reaction that shows the same number of atoms of each element on both the reactant and product sides of the equation.
In other words, the law of conservation of mass is obeyed in a balanced chemical equation, which states that the total mass of the reactants must equal the total mass of the products.
For more question on balanced chemical equation click on
https://brainly.com/question/11904811
#SPJ11
an element consists of 3 isotopes. isotopes A has an abundance of 45.6 % and it’s mass is 14.0 amu. Isotope B has an abundance of 25.2%, and has a mass of 15 amu, and isotope c has an abundance of 29.2% and it’s mass is 16 amu. What is the atomic mass of the element
The quantity of protons, neutrons, and electrons that each element has makes it unique.
Each chemical element's atoms has the same number of protons and electrons, which is important because neutrons' quantities are variable.
Isotopes are atoms with the same number of protons but differing numbers of neutrons.
They differ in mass, which affects their physical characteristics even if they have nearly identical chemical properties. There are unstable isotopes that emit radiation as well as stable isotopes that do not. These are referred to as radioisotopes.
Thus, The quantity of protons, neutrons, and electrons that each element has makes it unique.
Learn more about Electrons, refer to the link:
https://brainly.com/question/1255220
#SPJ1
What is the energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H?
Substance Mass (u)
4He 4.00260
3H 3.01605
1H 1.00783
The energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H is approximately -[tex]2.57 * 10^{-12 }.[/tex] Joules
How do we calculate?The balanced nuclear equation for the fusion of 3H and 1H to form 4He is shown below:
3H + 1H → 4He
We find that the difference in mass between the reactants and products is: (3 × 3.01605 u) + (1 × 1.00783 u) - (1 × 4.00260 u) = -0.01854 u
Einstein's energy equation is E = mc².
E = (-0.01854 u) × (1.66054 × 10^-27 kg/u) × (2.998 × 10^8 m/s)^2
E = [tex]-4.03 * 10^{-12}[/tex] J
The number of reactions = 2.55 g / 4.00260 g/mol = 0.637 mol
The total energy is = [tex]-4.03 * {10^-12} J[/tex]× 0.637 mol
total energy = [tex]2.57 * 10^{-12} J[/tex]
Learn more about Einstein's energy equation at:
https://brainly.com/question/27158464
#SPJ1
please help me!!!!!! Polonium-290 has a half-life of 57.6 years. If you start with a 10-gram sample of polonium-290, how much will be left after 172.8 years
^^^MUST SHOW WORK
It is significant to remember that the order of a reaction affects how a reaction's half-life is calculated. It is commonly expressed in seconds and is represented by the sign "t 1/2." The amount which is left after 172.8 years is 0.8 g.
The time it takes for the concentration of a particular reactant to reach 50% of its initial concentration, or the time it takes for the reactant concentration to reach half of its initial value, is known as the half-life of a chemical reaction.
To calculate the remaining amount:
N₀ / N = 2ⁿ
n = time / t1/2
172.8 / 57.6 = 3
N = 2ⁿ / N₀
N = 2³ / 10 = 0.8 g
To know more about half-life, visit;
https://brainly.com/question/31821452
#SPJ1
Two samples of carbon come into contact. A heat transfer will occur between sample A and sample B. What must be true
for heat to transfer from sample A to sample B?
The average kinetic energy of A is greater than that of B.
The average kinetic energy of B is greater than that of A.
The average kinetic energy of both samples is equal.
The average kinetic energy does not determine the direction of heat transfer.
Mark this and return
Save and Exit
56:26
Next
Submit
The axis of symmetry of a parabola is x = -2. It crosses the x axis at (-5,0). What is the coordinate of the other x-intercept?
The coordinate of the other x-intercept of a parabola with axis of symmetry x = -2 and crossing the x-axis at (-5,0) is (-1,0).
We know the vertex of the parabola in the example above is at the location (-2, y), where y is an integer. This is because the vertical line that passes through the vertex of a parabola is its axis of symmetry.
Since the parabola intersects the x-axis at (-5,0), we can infer that this location is a parabola's root. Given that the parabola is symmetric, a second root that is located at the same distance from the axis of symmetry must also exist.
The other root must be 3 units to the right of the axis of symmetry because the distance between the axis of symmetry and (-5,0) is 3 units to the left. The opposite x-intercept is therefore at (1, 0) or (-2 + 3, 0).
To know more about parabola, visit,
https://brainly.com/question/64712
#SPJ1
2H+O2 → 2H₂O
Three grams of hydrogen and 24 grams of oxygen were completely reacted to form
water. Which of the following is the amount of water produced?
27 grams of water are produced from the given amounts of hydrogen and oxygen.
To determine the amount of water produced from the reaction between hydrogen and oxygen, we need to compare the amounts of reactants (hydrogen and oxygen) to the stoichiometry of the balanced chemical equation.
The balanced equation is:
2H₂ + O₂ → 2H₂O
The molar mass of hydrogen (H₂) is 2 g/mol, and the molar mass of oxygen (O₂) is 32 g/mol.
Given:
Mass of hydrogen = 3 grams
Mass of oxygen = 24 grams
We can calculate the number of moles of each reactant by dividing their respective masses by their molar masses:
Number of moles of hydrogen = 3 grams / 2 g/mol = 1.5 moles
Number of moles of oxygen = 24 grams / 32 g/mol = 0.75 moles
According to the balanced equation, the ratio of hydrogen to water is 2:2, and the ratio of oxygen to water is 1:2. Therefore, the limiting reactant in this reaction is oxygen, as it is consumed in a smaller quantity compared to the stoichiometry of the reaction.
From the reaction, we can see that 1 mole of oxygen produces 2 moles of water. Thus, the number of moles of water produced is twice the number of moles of oxygen:
Number of moles of water = 2 * 0.75 moles = 1.5 moles
To determine the amount of water produced in grams, we multiply the number of moles by the molar mass of water (H₂O), which is approximately 18 g/mol:
Mass of water produced = 1.5 moles * 18 g/mol = 27 grams
for more such questions on water
https://brainly.com/question/19491767
#SPJ11
H₂F5BLi
plsssss helppp ima fail if i don’t go this
The chemical elements involved are; hydrogen, fluorine, boron and lithium
There are two hydrogen atoms, five fluorine atoms, one boron atom and one lithium atom.
What is a chemical formula?Chemical compounds are represented symbolically by chemical formulas, which reveal the types and amounts of atoms that make up the compound. It is a succinct approach to explain a substance's makeup.
The components of a compound are identified in a chemical formula by their corresponding chemical symbols, which are typically derived from their English or Latin names. The number of atoms of each element in a single compound molecule is indicated by the subscripts that follow each element.
Learn more about chemical formula:https://brainly.com/question/32018188
#SPJ1
The total pressure of gas collected over water is 770.0 mmHg and the temperature is 23.0 degrees Celsius what is the pressure of hydrogen gas formed in mmHg?
What is the density of an unknown compound in g/ml if 1.28 pounds of the compound has a volume of 4.50L
If evaporation causes surface water to be salty, where would you expect ocean water to be very
dense?
One would expect to find the densest ocean water at the bottom of the ocean, where the water is coldest and under the greatest pressure.
Ocean water is densest at the bottom, where it is coldest and under the greatest pressure. The salt content of seawater does affect its density, but it is not the primary factor. The density of seawater is determined by its temperature and salinity.
As seawater evaporates, the concentration of salt increases, but the volume of water decreases, leading to an increase in density. However, this effect is relatively small compared to the influence of temperature. Colder water is denser than warmer water, which means that the deep ocean is much denser than the surface.
Therefore, The density of seawater at the bottom of the ocean can reach up to 1,040 kilograms per cubic meter, which is almost 5% denser than surface seawater.
For more such questions on ocean
https://brainly.com/question/31034213
#SPJ11