Ten percent of the items produced by a machine (ongoing process) are defective. A random sample of 100 items is selected and checked for defects. What is the probability that the sample will contain more than 5% defective units

Mrs. Staviski will get 4 sections if she cuts a 2-foot long piece of yarn into 1/2-foot sections.

If Mrs. Staviski divides a 2-foot-long strand of yarn into 1/2-foot-long sections

We must divide the overall length of the yarn by the length of each segment to see how many sections will result:

2 feet long divided by 1/2 foot per segment equals (2*2) / 1 = 4 sections

Therefore, Mrs. Staviski will get 4 sections if she cuts a 2-foot long piece of yarn into 1/2-foot sections.

Learn more about  sections at https://brainly.com/question/3603397

#SPJ1

The average monthly power usage in the electrical maintenance shop is 51.93 kilowatt-hours.

The average monthly power usage in the electrical maintenance shop can be calculated by adding the power usage of each month and dividing by the number of months.

April: 42.2 kWh
May: 59.25 kWh
June: 53.63 kWh
July: 62.4 kWh
August: 63.75 kWh
September: 30.35 kWh

Total power usage: 42.2 + 59.25 + 53.63 + 62.4 + 63.75 + 30.35 = 311.58 kWh

Number of months: 6

Average monthly power usage: 311.58 kWh / 6 = 51.93 kWh

Know more about average here:

https://brainly.com/question/24057012

#SPJ11

To determine the number of receptacles required for the bathroom counter space, we need to refer to the electrical code guidelines. The specific requirements may vary depending on the country or region, as well as the local electrical codes in place.

In the United States, according to the National Electrical Code (NEC), at least one 20-ampere-rated branch circuit is required to serve the bathroom receptacles. The code specifies that this circuit should be dedicated solely to the bathroom receptacles and should not serve any other areas.

The NEC also states that at least one receptacle outlet is required on the bathroom countertop. This receptacle should be located within 3 feet of the outer edge of the countertop and should be installed above the countertop surface. This means that a receptacle needs to be placed within reach of the bathroom counter space.

Considering the given information that the bathroom counter space is seven feet, including the sink, we need to install at least one receptacle outlet on the countertop within 3 feet of the outer edge. Depending on the specific layout and size of the counter space, additional receptacles may be required to meet the code's requirements for accessibility and convenience.

To ensure compliance with local electrical codes and safety standards, it is advisable to consult with a licensed electrician or refer to the specific electrical codes applicable in your area. They will be able to provide accurate guidance based on the local requirements and regulations.

To know more about electrical refer here

https://brainly.com/question/31173598#

#SPJ11

The correct interpretation of the 95% confidence interval for 20-year-old homes with 3000 square feet of area is that we are 95% confident that the true mean sales price of 20-year-old homes with 3000 square feet of area falls between $200,000 and $230,000 (in $1000s).

A confidence interval provides a range of values within which we can be a certain level of confident (e.g. 95%) that the true population mean falls. In this case, the interval [200, 230] (in $1000s) is a range of values that is likely to contain the true mean sales price of 20-year-old homes with 3000 square feet of area with a 95% level of confidence.

We cannot say for certain that the true mean sales price falls within this interval, but we can be reasonably confident that it does based on the data and the method used to calculate the confidence interval.

To know more about confidence interval, refer here:

https://brainly.com/question/14366786#

#SPJ11

The sole inference whereby the total amount of figures on the cube will be divisible by three.

The cube’s faces are labeled as A, B, C, D, E, and F.

It’s apparent that pairs of opposite sides combine to equal the same value: namely A+F=S, B+E=S, and C+D=S.

Thus, determining the summation of all values entails adding each group of pairs together: (A+F) + (B+E) + (C+D) = 3S.

Unless additional information is provided, the sole inference whereby the total amount of figures on the cube will be divisible by three.

Read more about cubes here:

https://brainly.com/question/26726803

#SPJ1

Having the right product means that the software being developed meets the needs and requirements of its intended users.

This involves identifying the target audience, understanding their needs, and designing the software in a way that meets those needs. In addition to functionality, having the right product also means ensuring the software is user-friendly, reliable, and efficient. Achieving the right product requires effective communication between developers and stakeholders, as well as ongoing testing and feedback to ensure that the software meets its intended purpose.

Ultimately, having the right product leads to greater user satisfaction, increased productivity, and improved overall performance of the software.

To learn more about Coordinates click here

brainly.com/question/16634867

#SPJ11

The correct answer is a) Yes, (27.950, 34.250) covers the true mean. We can reasonably conclude that the interval (27.950, 34.250) covers the true mean with a high degree of certainty.

Based on the information provided by the employee of the College Board, we can say with 97% confidence that the true mean number of correct answers falls within the interval (27.950, 34.250). This means that there is only a 3% chance that the true mean falls outside of this interval. A confidence interval is a range of values that is likely to contain the true population parameter, in this case, the true mean. Since the confidence interval is at a 97% level, we can be 97% confident that the true mean lies within this range. Therefore, the best answer is that (27.950, 34.250) does cover the true mean.

Learn more about true mean here

brainly.com/question/28405119

#SPJ11

For a sample for manufacturing process will increase the mean acceptable transmission distance, the correct test statistic value is t = 2.36. So, option(a) is right one.

We have a sample of a type of light-carrying fiber optic cable, and the research team wants to investigate whether modifications in the manufacturing process will increase the diameter. Then sample mean, [tex] \bar X [/tex] = 60.3 km

Population mean, μ = 58 km

Standard deviation, σ = 4.35 km.

Sample size, n = 20

Let's consider the population is normally distributed. We have to determine the value of test statistic that is t-score.

Test statistic : From the normal distribution the t-score formula for mean difference is, [tex]t =\frac{ \bar X - \mu}{\frac{\sigma}{\sqrt{n}}}[/tex]

Substitute all known values in above formula, [tex]t = \frac{ 60.3 - 58 }{\frac{ 4.35}{\sqrt{20}}} [/tex]

[tex]= \frac{ 2.3 }{ \frac{4.35}{\sqrt{20}}} [/tex]

= 2.3646 ~ 2.36

Hence, required test statistic value is 2.36.

For more information about test statistic, visit :

https://brainly.com/question/29337608

#SPJ4

Complete question:

A certain type of fiber optic cable transmits light at a mean distance of 58 km. A research team wishes to investigate if a modification in the manufacturing process will increase the mean acceptable transmission distance. A sample of twenty batches of cable produced under the new process is tested. The sample mean is 60.3 km with a sample standard deviation of 4.35 km. Assume the population is normally distributed. The correct test statistic is

a) t= 2.36

b) t=−2.36

c) z=4.45

d) z=2.36

e) z=−2.36

There are over 6 quadrillion ways to make starting hands for Derek, Margaret, and Lenny!

We can start by finding the number of ways to choose 7 cards out of the 52 for Derek, then the number of ways to choose 7 cards out of the remaining 45 for Margaret, and then the remaining cards (which will form Lenny's hand).

The number of ways to choose 7 cards out of 52 is:

C(52,7) = 133,784,560

Once Derek has his 7 cards, there are 45 cards remaining, so the number of ways to choose 7 cards for Margaret is:

C(45,7) = 45,379,620

Finally, Lenny gets the remaining cards, so there is only one way to choose his hand.

Therefore, the total number of ways to make starting hands for all three players is:

133,784,560 x 45,379,620 x 1 = 6,081,679,822,404,800

So there are over 6 quadrillion ways to make starting hands for Derek, Margaret, and Lenny!

To learn more about cards  here

https://brainly.com/question/28714039

#SPJ4

Amir's search for Hassan and the blue kite occurs in the novel "The Kite Runner" by Khaled Hosseini. The two men Amir encounters mock Hassan primarily because of his Hazara ethnicity, which is a marginalized and discriminated group in Afghanistan.

Hassan's social status is further complicated by the fact that he is Amir's family's servant, emphasizing the existing class differences between them. The novel portrays the social and cultural tensions in Afghanistan during that period, highlighting the disparities between the dominant Pashtun ethnic group, which Amir belongs to, and the Hazara minority. These disparities manifest in various forms of prejudice, including mockery, which further emphasizes the power dynamics at play.

In this particular scene, the men's mockery of Hassan is an attempt to belittle and demean him, thereby reinforcing the status quo that supports their own position within the social hierarchy. Amir's reaction to the situation also sheds light on his  internal struggle with loyalty, friendship, and personal identity.

In conclusion, the men mock Hassan due to his Hazara ethnicity and his position as a servant in Amir's household, reflecting the societal prejudices and power imbalances present in Afghanistan during that time.

Know more about hierarchy here:

https://brainly.com/question/31044709

#SPJ11

The probability density function f(x) is given by f(x) = c(3x^2 - 8x - 5) for 0 < x < 1. The value of the constant c is -1/8. The cumulative distribution function of X is F(x) = (-1/8)(x^3 - 4x^2 - 5x).

The random variable X represents the portion of a flood insurance claim for flooding damage to a house, and To find the constant c, we need to ensure that the probability density function integrates to 1 over the specified interval, which is a fundamental property of probability density functions.

∫[0,1] c(3x^2 - 8x - 5) dx = 1

First, integrate the function without the constant c:

∫(3x^2 - 8x - 5) dx = (x^3 - 4x^2 - 5x)|[0,1] = (1 - 4 - 5) - (0) = -8

Now, multiply the constant c by the integral:

c(-8) = 1

Solve for c:

c = -1/8

Thus, the value of the constant c is -1/8.

Next, we find the cumulative distribution function (CDF) F(x) of X, which is the integral of the probability density function from 0 to x:

F(x) = ∫[-1/8 (3t^2 - 8t - 5)] dt, where the integration is done over the interval [0, x].

Upon integrating and applying the limits, we get:

F(x) = (-1/8)(t^3 - 4t^2 - 5t)|[0,x] = (-1/8)(x^3 - 4x^2 - 5x)

So the cumulative distribution function of X is F(x) = (-1/8)(x^3 - 4x^2 - 5x).

To learn more about probability  click here

brainly.com/question/30034780

#SPJ11

Answer:4x32 givea you

Step-by-step explanation:

Answer:  A and D

Step-by-step explanation:

For the function to be linear for your problem, you could see if the x increases each time by the same amount and separately looking at the y the y needs to be increasing by the same amount.

A.  Correct  If I add 3 to each for x's, it's ok, and for the y's i subtract 4 each time

B.  Incorrect.  The x's look ok because 2 is subtracted each time but y's it starts to subtract 4 then it subtracts 5 for the next one

C. Incorrect.   x's are ok but then y's subtract 2 and the last one subtracts 1

D.  Correct.  x's, each add 1,  and y's each subtract 3

We can estimate that B × T is roughly 0.57, or equivalently, T is roughly 0.57 / B.

Assuming that the rumor spreads according to the logistic law, we can use the following formula to estimate the number of people who will hear the rumor by 5 pm:

[tex]P(t) = K / (1 + A \times e^{(-B\times t)})[/tex]

where:

P(t) is the number of people who have heard the rumor by time t,

K is the maximum possible number of people who can hear the rumor (in this case, the total population of the town, which is 10,000),

A and B are constants that determine the shape of the logistic curve, and

e is the mathematical constant approximately equal to 2.71828.

To solve for A and B, we need to use the information given in the problem. We know that at noon, 4,000 people have heard the rumor. Let's assume that "noon" corresponds to t=0 (i.e., we start counting time from noon). Then we have:

[tex]P(0) = 4,000 = K / (1 + A \times e^{(-B\times 0)})[/tex]

4,000 = K / (1 + A)

1 + A = K / 4,000

We also know that the logistic law predicts that the number of people who hear the rumor will eventually level off and approach the maximum value K. Let's assume that the leveling off occurs after a long time T (which we don't know). Then we have:

P(T) = K

We can use these two equations to solve for A and B:

A = (K / 4,000) - 1

B = ln((K / 4,000) / (1 - K / 4,000)) / T

where ln denotes the natural logarithm.

Unfortunately, we don't know the value of T, so we can't calculate B directly. However, we can make an educated guess based on the shape of the logistic curve. Typically, the curve starts out steeply and then levels off gradually. Therefore, we can assume that the time it takes for the curve to reach 90% of its maximum value is roughly equal to T. In other words, we want to solve for T such that:

[tex]P(T) = 0.9 \times K[/tex]

Substituting the expression for P(t) into this equation, we get:

[tex]0.9 \times K = K / (1 + A \times e^{(-BT)})\\0.9 = 1 / (1 + A \times e^{(-BT)})\\1 + A \times e^{(-BT)} = 1 / 0.9\\A \times e^{(-BT)} = 1 / 0.9 - 1\\e^{(-B\times T)} = (1 / 0.9 - 1) / A\\B \times T = -ln((1 / 0.9 - 1) / A)[/tex]

Plugging in the values for K and A, we get:

A = (10,000 / 4,000) - 1 = 1.5

[tex]B \times T = -ln((1 / 0.9 - 1) / 1.5) = 0.57[/tex]

for such more question on equivalent

https://brainly.com/question/17448505

#SPJ11

It is true that the Fisher LSD (Least Significant Difference) confidence interval and the t-test confidence interval may exhibit slight differences. These differences arise from the nature of the tests and their respective assumptions.

The Fisher LSD test is a multiple comparison technique that compares each pair of means after conducting an ANOVA (Analysis of Variance) test. This test is employed when the null hypothesis is rejected, and it helps determine which specific group means differ from one another. The Fisher LSD test assumes equal variances between groups and normality of the data.

On the other hand, the t-test confidence interval is used in a two-sample t-test, which compares the means of two independent groups to determine if there is a significant difference. The t-test can accommodate unequal variances through a variant called the Welch's t-test. It also assumes normality of the data.

The differences between the Fisher LSD and t-test confidence intervals can be attributed to several factors:

1. Multiple comparisons: The Fisher LSD test accounts for multiple comparisons among group means, while the t-test only considers a single comparison between two groups.

2. Assumptions: The Fisher LSD test assumes equal variances, whereas the t-test can be adapted to handle unequal variances.

3. Error rate control: Fisher LSD does not control the family-wise error rate, which may increase the chances of false positive findings when making multiple comparisons. In contrast, the t-test controls the error rate for a single comparison.

In summary, the Fisher LSD and t-test confidence intervals may differ due to the number of comparisons, assumptions about variances, and error rate control. These differences can impact the precision and interpretation of the intervals in specific situations.

To know more about confidence interval, refer to the link below:

https://brainly.com/question/13067956#

#SPJ11

The distance that you will travel if you will drive at given speed for the following situations are 120 km, 330km, 69km, 60km, and 234km respectively.

Calculating distance involves using the formula:

distance = rate x time

Where "rate" is the speed at which you're traveling, measured in units of distance per unit of time (such as kilometers per hour or miles per minute), and "time" is the duration of your travel in those units of time (such as hours or minutes).

To find the distance, simply multiply the rate by the time. For example, if you're traveling at 60 kilometers per hour for 2 hours, your distance would be:

distance = 60 km/h x 2 h = 120 km

So in this case, you would travel 120 kilometers.

Similarly,

Distance = (Speed) x (Time) = 55 km/h x 6 h = 330 km

Distance = (Speed) x (Time) = 46 km/h x 1.5 h = 69 km

Distance = (Speed) x (Time) = 80 km/h x (45 min/60 min) = 60 km

Distance = (Speed) x (Time) = 78 km/h x 3 h = 234 km

Thus, the distances are 120 km, 330km, 69km, 60km, and 234km respectively.

For more details regarding distance formula, visit:

https://brainly.com/question/25841655

#SPJ1

Calculate the distance that you will travel is you will

drive for the following situations. Write your answers on a separate sheet of

paper.

1. 3 hours at 40km/h

2. 6 hours at 55km/h

3. 1.5 hours at 46km/h

4. 45 minutes at 80km/h

5. 3 hours at 78km/h​

To solve the given initial value problems, we need to find the general solution of the differential equation dy/dt = -2t and then use the initial condition to determine the particular solution for each problem.

a. y(0) = -1:

We can start by separating the variables and integrating both sides of the equation:

dy/dt = -2t

dy = -2t dt

Integrating both sides, we get:

y = -t^2 + C

where C is the constant of integration. To find the particular solution that satisfies the initial condition y(0) = -1, we substitute t=0 and y=-1 into the general solution:

-1 = -0^2 + C

C = -1

Therefore, the particular solution is:

y = -t^2 - 1

b. y(0) = 5:

Following the same steps as above, we have:

dy/dt = -2t

dy = -2t dt

Integrating both sides, we get:

y = -t^2 + C

where C is the constant of integration. To find the particular solution that satisfies the initial condition y(0) = 5, we substitute t=0 and y=5 into the general solution:

5 = -0^2 + C

C = 5

Therefore, the particular solution is:

y = -t^2 + 5

In summary, the solutions to the given initial value problems are:

a. y = -t^2 - 1

b. y = -t^2 + 5

To learn more about differential equation  : brainly.com/question/14620493

#SPJ11

The intrinsic rate of increase depends on the initial population size, but for any given population size, it is 11.5 times the population size

The intrinsic rate of increase (r) is given by the difference between the birth rate (b) and the death rate (d), divided by the average population size (N) over the same period of time:

r = (b - d) / N

In this case, the birth rate is 6 beetles per year, and the death rate is 0.5 beetles per year. We can assume that the population is growing exponentially, which means that the average population size over the year is half the initial population size. Therefore:

N = N0 / 2

where N0 is the initial population size.

Putting it all together, we get:

r = (6 - 0.5) / (N0 / 2)

r = 11.5 / N0

The intrinsic rate of increase depends on the initial population size, but for any given population size, it is 11.5 times the population size. For example, if the initial population size is 100 beetles, the intrinsic rate of increase is: r = 11.5 / 100 = 0.115 per year

Learn more about average population

https://brainly.com/question/30744012

#SPJ4

Proving consistency involves demonstrating that a set of requirements can be met simultaneously, while proving inconsistency requires showing that there is at least one conflict or inconsistency. This fundamental difference in approach makes proving inconsistency an easier task than proving consistency.

In general, it is easier to show that a set of requirements is inconsistent rather than to prove that they are consistent because inconsistency requires only a single counterexample, while consistency requires showing that all possible combinations of requirements are compatible with each other.

To prove that a set of requirements is consistent, one needs to demonstrate that all of the requirements can be met simultaneously without any conflicts. This can be a challenging task, particularly when dealing with complex and interdependent requirements.

On the other hand, to show that a set of requirements is inconsistent, one only needs to find a single example where two or more requirements conflict with each other or cannot be met simultaneously. This can be a much simpler and more straightforward process, as it only requires finding a single problem rather than searching for a solution that satisfies all requirements.

for such more question on consistency

https://brainly.com/question/14633769

#SPJ11

To find the probability of a person with "some college or an associate's degree" and in the labor force being employed, we need the following information: the number of people with that education level who are employed and the total number of people with that education level in the labor force.

Let's assume we have the following data (these are just example numbers, you can replace them with actual data if you have it):

1. Number of people with "some college or an associate's degree" who are employed: 400
2. Total number of people with "some college or an associate's degree" in the labor force: 500

Step 1: Divide the number of employed people (400) by the total number of people in the labor force (500).
Probability = (Number of employed people with some college or an associate's degree) / (Total number of people with some college or an associate's degree in the labor force)

Step 2: Calculate the probability
Probability = 400 / 500 = 0.8

Based on the given data, the probability that a person who has completed some college or an associate's degree and is in the labor force is employed is 0.8 or 80%. This means that 80% of individuals with that education level in the labor force are employed.

To know more about probability visit:

brainly.com/question/30034780

#SPJ11

The cruising speed of the plane is 468 mph and the speed of the wind is 52mph

To solve this problem, we can use the formula:
distance = rate x time

Let's let "r" be the cruising speed of the plane and "w" be the speed of the wind. Then we can write:

1040 = (r + w) x 2    (since the plane is flying with a tailwind)
1040 = (r - w) x 2.5  (since the plane is flying against the wind)

Now we can solve for r and w. Let's start by solving for r in the first equation:

1040 = 2r + 2w
520 = r + w

Next, let's solve for r in the second equation:

1040 = 2.5r - 2.5w
416 = r - w

Now we have two equations with two variables:

520 = r + w
416 = r - w

We can solve for r by adding the two equations:

936 = 2r
r = 468

Now that we know r, we can solve for w by substituting into either equation:

520 = 468 + w
w = 52

The cruising speed of the plane is 468 mph and the speed of the wind is 52mph

To know more about "Rate" refer here:

https://brainly.com/question/18798899#

#SPJ11

Correct answer is the option (2) 1 yd of carpet for $0.51, is the best buy as it has the lowest cost per yard of carpet.

To determine the best buy among the three options, we need to calculate the cost per yard of carpet for each option.

Option 1: 3 yd of carpet for $1.90

Cost per yard = $1.90 ÷ 3 = $0.63 per yard

Option 2: 1 yd of carpet for $0.51

Cost per yard = $0.51 per yard

Option 3: 2 yd of carpet for $1.08

Cost per yard = $1.08 ÷ 2 = $0.54 per yard

Therefore, from the above solutions, we can see that the second option, i.e., 1 yd of carpet for $0.51, is the best buy as it has the lowest cost per yard of carpet.

To learn more about the lowest cost, click here.

https://brainly.com/question/24120965

https://brainly.com/question/15698993

According to the general equation for conditional probability if P(A∩B)=4/7 and P(B)=7/8, then P(A | B) = 32/49.

We have the general equation of conditional probability as,

P(A | B) = P(A ∩ B) / P(B)

Here it is given that,

P(A ∩ B) = 4/7

P(B) = 7/8

Substituting the given values,

P(A | B) = 4/7 ÷ 7/8

            = 4/7 × 8/7

            = 32/49

Hence the required probability is 32/49.

Learn more about Conditional Probabilities here :

https://brainly.com/question/30144287

#SPJ1

Answer:

6 > 2x + y

To find the slope and y-intercept for this linear inequality, we need to write it in slope-intercept form, which is y = mx + b, where m is the slope and b is the y-intercept.

Rearranging the given inequality, we get:

y > -2x + 6

Comparing this with y = mx + b, we can see that the slope is -2 and the y-intercept is 6.

So, the slope is m = -2 and the y-intercept is b = 6.

To graph this linear inequality, we can draw the line y = -2x + 6 (which has a slope of -2 and y-intercept of 6) as a dashed line (since y > -2x + 6, not y = -2x + 6). Then we shade the region above the line, since all the points in that region satisfy the inequality y > -2x + 6.

x < 3y - 6

Again, we need to write this inequality in slope-intercept form to find the slope and y-intercept. Rearranging, we get:

3y > x + 6

Dividing both sides by 3, we get:

y > (1/3)x + 2

So, the slope is m = 1/3 and the y-intercept is b = 2.

To graph this linear inequality, we draw the line y = (1/3)x + 2 (which has a slope of 1/3 and y-intercept of 2) as a dashed line (since x < 3y - 6, not x = 3y - 6). Then we shade the region below the line, since all the points in that region satisfy the inequality x < 3y - 6.

The integral is convergent. To evaluate it, we use the formula for the integral of e^x, which is e^x + C. So, integrating e^-6p gives us (-1/6)e^-6p. Evaluating this from 0 to infinity, we get: (-1/6)e^-6(infinity) - (-1/6)e^0.

Since e^-6(infinity) approaches 0 as p approaches infinity, the first term becomes 0. Therefore, the integral evaluates to: (-1/6)e^0 = -1/6, So the quantity converges to -1/6.To determine whether the given integral is convergent or divergent, we need to analyze the integral: ∫[2, ∞] e^(-6p) dp.

To evaluate this integral, we first apply the Fundamental Theorem of Calculus. We find the antiderivative of e^(-6p) with respect to p, which is (-1/6)e^(-6p). Now, we need to evaluate the limit: lim (b → ∞) [(-1/6)e^(-6p)] [2, b].

When we take the limit as b approaches infinity, e^(-6p) approaches 0 because the exponent becomes increasingly negative. Thus, the integral is convergent.

To find the value of the convergent integral, we can calculate: ((-1/6)e^(-6*2)) - ((-1/6)e^(-6*∞)) = (-1/6)e^(-12) - 0 = (-1/6)e^(-12), So, the integral is convergent, and its value is (-1/6)e^(-12).

To know more about theorem click here

brainly.com/question/30242664

#SPJ11

Answer:

(a - 5) (a + 2)

Step-by-step explanation:

Answer:

(a – 5)(a + 2).

Step-by-step explanation:

To factorize a²– 3a – 10​, we need to find two numbers whose product is -10 and whose sum is -3. These numbers are -5 and 2. So we can write:

a² – 3a – 10 = (a – 5)(a + 2)

Therefore, the factorization of a²– 3a – 10 is (a – 5)(a + 2).

A researcher needs a sample size of 629 to estimate the passing rate of Stats courses at FIU with a margin of error of 3% and a confidence level of 90%.

To estimate the passing rate of Stats courses at FIU with a margin of error of 3% and a confidence level of 90%, we need to calculate the appropriate sample size.

Here's a step-by-step explanation:

1. Identify the key terms: In this problem, the margin of error is 3% (0.03), the confidence level is 90% (z-score corresponding to 90% is 1.645), and the estimated passing rate is 70% (0.7).

2. Convert the passing rate and margin of error to proportions: The passing rate (p) is 0.7, and the margin of error (E) is 0.03.

3. Calculate the standard deviation (SD) for the proportion: SD = √(p(1-p)) = √(0.7(1-0.7)) = √(0.21) ≈ 0.458.

4. Determine the required sample size (n) using the formula: n = (z² * SD²) / E², where z is the z-score corresponding to the desired confidence level (1.645 for 90% confidence).

5. Plug in the values: n = (1.645² * 0.458²) / 0.03² ≈ (2.706 * 0.209) / 0.0009 ≈ 0.565 / 0.0009 ≈ 628.89.

6. Round up the result to the nearest whole number: Since you cannot have a fraction of a person in your sample, round up to the nearest whole number, which is 629.

In conclusion, a researcher needs a sample size of 629 to estimate the passing rate of Stats courses at FIU with a margin of error of 3% and a confidence level of 90%.

To learn more about estimate, refer here:

https://brainly.com/question/17961193#

#SPJ11

The graph is attached in the solution.

Given that, the equation t = 4c represents the number of tires t for c cars,

Here,

t is the dependent variable and c is the independent variable.

To plot the graph, find the coordinates by the values of c and getting the corresponding values of t, then plot those points on the graph, join the line.

The straight line obtained will be the graph of the equation.

Hence, the graph is given in the solution.

Learn more about graphs, click;

https://brainly.com/question/17267403

#SPJ1

Yes, that is correct. Collaboration is the process of working together with others, in this case, the customer, to achieve a common goal or find a mutually satisfying solution. It involves active listening, sharing ideas and information, and finding a compromise that meets the needs and goals of everyone involved.

Collaboration is a cooperative process where two or more parties work together to achieve a common goal. In the context of customer service, collaboration involves working with the customer to identify and solve problems, and to find mutually satisfying solutions that meet both the customer's needs and the organization's objectives.

Collaboration requires active listening, effective communication, and a willingness to work together to find solutions. It involves acknowledging the customer's concerns and understanding their perspective, as well as providing relevant information and options to help them make informed decisions.

for such more question on Collaboration

https://brainly.com/question/24345164

#SPJ11

The percentage of the sheets with no air bubbles is given as follows:

13.53%.

In a Poisson distribution, the probability that X represents the number of successes of a random variable is given by the following mass probability function:

[tex]P(X = x) = \frac{e^{-\mu}\mu^{x}}{(x)!}[/tex]

The parameters are listed and explained as follows:

The mean for this problem is given as follows:

[tex]\mu = 2[/tex]

The proportion of these sheets with no air bubbles is P(X = 0), hence it is given as follows:

P(X = 0) = e^-2 = 0.1353 = 13.53%.

More can be learned about the Poisson distribution at https://brainly.com/question/7879375

#SPJ1