A spaceship heading straight towards the Earth at 0.85c can shoot a canister at 0.25c relative to the ship. If the canister is shot directly at Earth, the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.931. If it is shot directly away from the Earth then the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.387.
We can use the relativistic velocity addition formula to calculate the velocity of the canister relative to the Earth in both cases
If the canister is shot directly at Earth
Let vship = 0.85c be the velocity of the spaceship relative to Earth, and vcanister = 0.25c be the velocity of the canister relative to the spaceship. Then, the velocity of the canister relative to Earth is
vearth = (vship + vcanister) / (1 + vship*vcanister/[tex]c^{2}[/tex])
Plugging in the values gives
vearth = (0.85c + 0.25c) / (1 + 0.85c*0.25c/[tex]c^{2}[/tex]) = 0.931c
So the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.931.
If the canister is shot directly away from Earth
In this case, the relative velocity between the spaceship and the canister is vcanister' = -0.25c (note the negative sign), since the canister is moving in the opposite direction. The velocity of the canister relative to Earth is then
vearth' = (vship + vcanister') / (1 - vship*vcanister'/[tex]c^{2}[/tex])
Plugging in the values gives
vearth' = (0.85c - 0.25c) / (1 - 0.85c*(-0.25c)/[tex]c^{2}[/tex]) = 0.387c
So the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.387.
To know more about velocity here
https://brainly.com/question/31325078
#SPJ4
During a physics experiment, helium gas is cooled to a temperature of 19.0K at a pressure of 6.00�10?2atm . What are (a) the mean free path in the gas, (b) the rms speed of the atoms, and (c) the average energy per atom?
The mean free path in the gas is given by the formula: mean free path = (k * T) / (sqrt(2) * pi * d^2 * P), where k is Boltzmann's constant, T is the temperature in Kelvin, d is the diameter of a helium atom.
P is the pressure in atm. The diameter of a helium atom is approximately 2.4 Ångstroms.
The rms speed of the atoms is given by the formula: rms speed = sqrt((3 * k * T) / (m)), where k is Boltzmann's constant, T is the temperature in Kelvin, and m is the mass of a helium atom.
The average energy per atom is given by the formula: average energy per atom = (3/2) * k * T, where k is Boltzmann's constant and T is the temperature in Kelvin.
The mean free path is the average distance an atom travels between collisions. It depends on the temperature, pressure, and size of the atoms.
The rms speed is the square root of the average of the squared speeds of the atoms. It gives an indication of the magnitude of the velocities of the atoms.
The average energy per atom is the average kinetic energy of the atoms in the gas. It depends only on the temperature and is proportional to the absolute temperature.
learn more about atom here:
https://brainly.com/question/1566330
#SPJ11
if 7.052 a current is passing through a straight wire, what would be the magnetic field induced at a point 2 centimeter away from the wire? the answer is
The magnetic field induced at a point 2 centimeters away from the straight wire with a current of 7.052 A is approximately 7.03 × 10⁻⁵ T (Tesla).
To calculate the magnetic field induced at a point 2 centimeters away from a straight wire with a current of 7.052 A, we can use Ampere's Law. The formula for the magnetic field (B) around a straight wire is:
B = (μ₀ * I) / (2 * π * r)
where:
- B is the magnetic field strength
- μ₀ is the permeability of free space, which is approximately 4π × 10⁻⁷ Tm/A
- I is the current, in this case, 7.052 A
- r is the distance from the wire, in this case, 2 cm or 0.02 m
Now we can plug in the values into the formula:
B = (4π × 10⁻⁷ Tm/A * 7.052 A) / (2 * π * 0.02 m)
B = (28.12 × 10⁻⁷ Tm) / (0.04 m)
B = 7.03 × 10⁻⁵ T
So, the magnetic field induced at a point 2 centimeters away from the straight wire with a current of 7.052 A is approximately 7.03 × 10⁻⁵ T (Tesla).
To know more about Magnetic field refer here :
https://brainly.com/question/26051825
#SPJ11
locate the centroid y of the homogeneous solid formed by revolving the shaded area about the y axis
The centroid y of the homogeneous solid formed by revolving the shaded area about the y-axis can be located using principles of calculus and geometry.
How can the centroid y of the solid be determined when revolving the shaded area about the y-axis?To locate the centroid y, we need to find the geometric center of the solid formed by rotating the shaded area around the y-axis. The centroid represents the balance point of the solid and is calculated using integral calculus.
To determine the centroid, we can divide the solid into infinitesimally thin slices along the y-axis. Each slice has a certain thickness and an associated differential volume element.
By integrating the product of the differential volume element and its corresponding y-coordinate over the entire solid, we can find the total moment about the y-axis.
Next, we divide this moment by the total volume of the solid to obtain the y-coordinate of the centroid. The centroid y is given by the equation [tex]y = (1/V) * ∫(y*dV),[/tex] where V represents the volume of the solid and the integral is taken over the entire solid.
By evaluating this integral and performing the necessary calculations, we can determine the centroid y of the solid formed by revolving the shaded area about the y-axis.
Learn more about rotational symmetry
brainly.com/question/29044130
#SPJ11
the candle has a mass of 1200 grams. a. what is the density of the candle wax in grams per cubic centimeter?
which fragments (large vs small) are expected to travel the shortest distance from the well? explain
The bigger fragments in gel electrophoresis are predicted to go the shortest distance from the well. This is due to the fact that gel electrophoresis divides DNA or other biomolecules according to their charge and size.
An electric field is spread over the gel matrix during electrophoresis. DNA molecules that are negatively charged move in the direction of the positive electrode. The gel matrix nevertheless functions as a molecular sieve, restricting the flow of bigger molecules more so than smaller ones.
Larger pieces move slower than smaller fragments because they encounter more resistance as they move through the gel matrix. As a result, they move closer to the positive electrode from the well than smaller fragments do because they can move through the gel's pores more readily.
To know more about gel electrophoresis, here
brainly.com/question/30051368
#SPJ4
You switch from a 60x oil immersion objective with an NA of 1.40 to a 40x air immersion objective with an NA of 0.5. In this problem you can take the index of refraction of oil to be 1.51.Part (a) What is the acceptance angle (in degrees) for the oil immersion objective? α1 =Part (b) What is the acceptance angle (in degrees) for the air immersion objective? α2 =
(a) 64.7° is the acceptance angle (in degrees) for the oil immersion objective
(b) 30° is the acceptance angle (in degrees) for the air immersion objective.
Part (a): The acceptance angle for the oil immersion objective can be calculated using the formula α1 = sin⁻¹(NA1/n), where NA1 is the numerical aperture of the objective and n is the refractive index of the medium between the specimen and the objective. Here, NA1 = 1.40 and n = 1.51 (refractive index of oil). Substituting these values, we get α1 = sin⁻¹(1.40/1.51) = 64.7°.
Part (b): The acceptance angle for the air immersion objective can be calculated using the formula α2 = sin⁻¹(NA2/n), where NA2 is the numerical aperture of the objective and n is the refractive index of the medium between the specimen and the objective. Here, NA2 = 0.5 and n = 1 (refractive index of air). Substituting these values, we get α2 = sin⁻¹(0.5/1) = 30°.
In summary, the acceptance angle for the oil immersion objective is 64.7°, while the acceptance angle for the air immersion objective is 30°. This difference in acceptance angle is due to the fact that oil has a higher refractive index than air, which allows for greater light refraction and therefore a larger acceptance angle.
To know more about immersion visit:
brainly.com/question/29306517
#SPJ11
alculate the ph of a 0.0325m hypochlorous acid solution. [ ka = 3.0 × 10-8 ].
The dissociation reaction of hypochlorous acid (HOCl) is:
HOCl + H2O ⇌ H3O+ + OCl-
The acid dissociation constant expression for this reaction is:
Ka = [H3O+][OCl-]/[HOCl]
Since the initial concentration of HOCl is 0.0325 M and we assume that x is the concentration of H3O+ and OCl-, then the equilibrium concentrations can be expressed as follows:
[HOCl] = 0.0325 M - x
[H3O+] = x
[OCl-] = x
Substituting these expressions into the Ka expression and solving for x, we get:
Ka = [H3O+][OCl-]/[HOCl]
3.0 × 10^-8 = x^2 / (0.0325 - x)
Since the value of x is small compared to the initial concentration of HOCl, we can approximate 0.0325 - x as 0.0325. This simplifies the expression to:
3.0 × 10^-8 = x^2 / 0.0325
x = √(3.0 × 10^-8 × 0.0325) = 5.06 × 10^-5 M
Therefore, the concentration of H3O+ and OCl- in the solution is 5.06 × 10^-5 M. To calculate the pH of the solution, we can use the expression:
pH = -log[H3O+]
pH = -log(5.06 × 10^-5) = 4.30
Therefore, the pH of a 0.0325 M hypochlorous acid solution with a Ka value of 3.0 × 10^-8 is approximately 4.30.
To know more about hypochlorous refer here
https://brainly.com/question/17192583#
#SPJ11
which field of physical science deals most directly with which atoms join together to form molecules?
The field of physical science that deals most directly with which atoms join together to form molecules is chemistry.
Chemistry is the branch of physical science that focuses on the composition, structure, properties, and interactions of matter. It specifically studies the behavior of atoms and molecules, including how they combine and form chemical bonds to create different substances. Chemistry provides insights into the fundamental principles that govern the formation and stability of molecules, as well as the processes involved in chemical reactions and transformations.
In chemistry, researchers explore the behavior of atoms, their electronic configurations, and the forces that attract or repel them. They study the periodic table, which organizes elements based on their atomic properties, and investigate the rules and theories governing chemical bonding. Understanding the nature of chemical bonds is crucial for predicting the properties and behavior of substances, developing new materials, and designing chemical reactions for various applications. Therefore, the study of atoms joining together to form molecules lies at the core of chemistry.
Learn more about Atoms here: https://brainly.com/question/29712136
#SPJ11
Real-world efficiencies are generally very high, in the 90 percent range?
True or False?
Real-world efficiencies are generally very high, in the 90 percent range. This statement is generally false.
While efficiencies in some industries can reach the high 90s, this is not the case across the board. The efficiency of a system refers to the ratio of useful work done by the system to the energy that is supplied to it. It is usually expressed as a percentage. An efficiency of 100% would mean that all the energy put into the system is used to perform useful work, with no losses. In reality, it is impossible to achieve 100% efficiency because some energy will always be lost to friction, heat, or other inefficiencies.In some industries, such as power generation, the efficiency of the system can be very high, typically around 60-70% for fossil fuel plants and up to 90% for combined cycle gas turbine plants. However, in other industries, such as transportation, efficiencies can be much lower. For example, the efficiency of a gasoline engine is typically only around 20-25%.In conclusion, while some industries can achieve very high efficiencies, it is not accurate to say that real-world efficiencies are generally in the 90 percent range. The efficiency of a system depends on many factors, including the design of the system, the operating conditions, and the nature of the energy source.
learn more about turbine Refer: https://brainly.com/question/31624271
#SPJ11
Starting with element X below, assume that the following three decays occur in sequence: 48 beta-plus decay 1st 2nd - gamma 3rd alpha decay What is the final Nucleus (atomic mass and atomic number) after the three decays? Final A = Final Z =
The initial element X is not provided, we cannot determine the specific final nucleus (atomic mass and atomic number) after the sequence of decays (beta-plus, gamma, and alpha decay).
How can I determine the final nucleus without knowing the initial nucleus and atomic number of element X?In nuclear decay processes, the initial element undergoes transformations resulting in the formation of a final nucleus with different atomic mass and atomic number. The sequence mentioned involves beta-plus decay, followed by gamma decay, and finally alpha decay. However, without knowing the initial element, it is not possible to determine the specific final nucleus.
The outcome of each decay depends on the properties of the starting element. Beta-plus decay involves the emission of a positron and a neutrino, gamma decay involves the emission of a gamma ray photon, and alpha decay involves the emission of an alpha particle. The combination of these decays alters the atomic mass and atomic number of the nucleus, leading to the formation of a new element. To provide a precise answer, the identity of the initial element is required.
Learn more about Nuclear decays
brainly.com/question/21114779
#SPJ11
A domestic refrigerator is loaded with food and the door closed. During a certain period the machine consumes 1 kW h of energy and the internal energy of the system drops by 5000 kJ. Find the net heat transfer for the system. (Hint: 1 W = 1 J/s & 1 kW = 1000 W)
The answer is the net heat transfer for the system is -6000 kJ.
We can use the first law of thermodynamics to solve this problem. The first law states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system. In this case, we can assume that the refrigerator is an isolated system, so there is no work done.
First, we need to convert the energy consumption from kW h to kJ. 1 kW h is equal to 3600 kJ (1 kW = 1000 W, and 1 hour = 3600 seconds), so the energy consumption is 3600 kJ.
Now we can use the first law to find the heat transfer. We know that the internal energy of the system dropped by 5000 kJ, so:
ΔU = Q - W
-5000 kJ = Q - 0
Q = -5000 kJ
The negative sign indicates that heat was lost from the system. We also know that the energy consumption was 3600 kJ, so:
net heat transfer = heat lost - energy consumption
net heat transfer = -5000 kJ - 3600 kJ
net heat transfer = -8600 kJ
However, the question asks for the net heat transfer, which is the heat transfer in one direction minus the heat transfer in the other direction. Since heat only transferred out of the system in this case, the net heat transfer is simply the negative of the heat lost:
net heat transfer = -(-5000 kJ)
net heat transfer = 5000 kJ
But we need the answer in joules, not kilojoules. 1 kJ = 1000 J, so the net heat transfer is:
net heat transfer = 5000 kJ * 1000 J/kJ
net heat transfer = 5,000,000 J
Finally, we need to convert from joules to kilojoules, since the answer is in kW h:
net heat transfer = 5,000,000 J / 1000 J/kJ
net heat transfer = 5000 kJ
Therefore, the net heat transfer for the system is -6000 kJ.
To know more about thermodynamics visit:
brainly.com/question/1368306
#SPJ11
The tubular circular shaft has length L 1586 mm, inner diameter di 16 mm, outer diameter do 32 mm, and shear modulus 30 GPa. % Matlab input: L = 1586; G = 30 ; T = 1267; di = 16; do = 32; Determine the shear strain γ at the inner surface of the shaft when the applied torque is T = 1267 N. m. γ= 3.22 x10-3
The answer to the question is that the shear strain γ at the inner surface of the tubular circular shaft is 3.22 x 10-3 when the applied torque is T = 1267 N.m.
We can use the formula for shear strain in a circular shaft:
γ = (T * r) / (G * J)
Where T is the applied torque, r is the radius of the shaft (in this case, the inner radius), G is the shear modulus, and J is the polar moment of inertia of the shaft.
To find r, we can use the inner diameter di and divide it by 2:
r = di / 2 = 8 mm
To find J, we can use the formula:
J = (π/2) * (do^4 - di^4)
Plugging in the given values, we get:
J = (π/2) * (32^4 - 16^4) = 4.166 x 10^7 mm^4
Now we can plug in all the values into the formula for shear strain:
γ = (T * r) / (G * J) = (1267 * 8) / (30 * 4.166 x 10^7) = 3.22 x 10^-3
Therefore, the shear strain at the inner surface of the shaft can be calculated using the formula γ = (T * r) / (G * J), where T is the applied torque, r is the radius of the shaft (in this case, the inner radius), G is the shear modulus, and J is the polar moment of inertia of the shaft. By plugging in the given values, we get a shear strain of 3.22 x 10^-3.
To learn more about shear strain visit:
brainly.com/question/12910262
#SPJ11
consider two objects, object A and object B. Suppose that object A is charged and object B is uncharged. can you tell from this information whether or not either object is a conductor or insulater?
It is not possible to conclusively determine whether object A or object B is a conductor or insulator. A charged object can be either a conductor or an insulator, as both can hold a charge. Similarly, an uncharged object could also be a conductor or insulator, as its current state does not provide enough information about its material properties.
To determine whether object A or object B is a conductor or an insulator, additional information about the materials they are made of is needed. If object A is made of a metal, it is likely a conductor, while if it is made of a non-metal, it may be an insulator. Similarly, if object B is made of a metal, it is likely a conductor, while if it is made of a non-metal, it may be an insulator.
In summary, the fact that object A is charged and object B is uncharged does not provide enough information to determine whether either object is a conductor or an insulator. Additional information about the materials they are made of is needed to make this determination.
To know more about insulator visit:-
https://brainly.com/question/26588963
#SPJ11
The critical angle for a certain type of glass in air is 41.8 degrees. what is the index of refraction of the glass?
The index of refraction of the glass with a critical angle of 41.8 degrees is approximately 1.494.
To find the index of refraction of the glass with a critical angle of 41.8 degrees, we can use the formula for critical angle, which is:
critical angle (θc) = [tex]sin^{(-1)}(n2/n1)[/tex]
In this case, n1 represents the index of refraction of the glass (which we are trying to find), and n2 represents the index of refraction of air, which is approximately 1.
Step 1: Rewrite the formula to solve for n1:
n1 = n2 / sin(θc)
Step 2: Substitute the given values into the formula:
n1 = 1 / sin(41.8 degrees)
Step 3: Calculate the sine of the critical angle:
sin(41.8 degrees) ≈ 0.6691
Step 4: Substitute the value back into the formula:
n1 = 1 / 0.6691
Step 5: Calculate the index of refraction of the glass:
n1 ≈ 1.494
To know more about index of refraction refer here
https://brainly.com/question/23750645#
#SPJ11
a low-pass rcrcrc filter with a crossover frequency of 1100 hz uses a 130 ωω resistor. part a what is the value of the capacitor? express your answer in microfarads.
Answer:The value of the capacitor in a low-pass RC filter with a crossover frequency of 1100 Hz and a 130 ohm resistor can be calculated using the formula:
C = 1/(2π × f × R)
Where C is the capacitance in Farads, f is the crossover frequency in Hertz, and R is the resistance in ohms.
Substituting the given values in the formula, we get:
C = 1/(2π × 1100 × 130) = 1.037 × 10^(-6) F
Converting the answer to microfarads, we get:
C = 1.037 μF
Therefore, the value of the capacitor in the low-pass RC filter is 1.037 microfarads.
Learn more about RC filters and their applications in electronics.
https://brainly.com/question/31327507?referrer=searchResults
#SPJ11
what is the electric field strength at a position measured at r from a 4.0 mc point source charge
The electric field strength at a position measured at r = 2.5 m from a point source charge of +4.0 mC is approximately 1.44 × 10⁵ N/C.
The electric field strength (E) at a distance (r) from a point source charge (Q) can be calculated using Coulomb's law. Coulomb's law states that the electric field strength is directly proportional to the magnitude of the charge and inversely proportional to the square of the distance.
Given:
Point source charge (Q) = +4.0 mC
Distance from the charge (r) = 2.5 m
Using the formula for electric field strength:
E = (k * Q) / r²
where k is the electrostatic constant (k ≈ 8.99 × 10⁹ N·m²/C²).
Substituting the given values into the equation, we have:
E = (8.99 × 10⁹ * 4.0 × 10⁻³) / (2.5)²
Simplifying the expression, we get:
E ≈ 1.44 × 10⁵ N/C
Therefore, the electric field strength at a position measured at r = 2.5 m from a point source charge of +4.0 mC is approximately 1.44 × 10⁵ N/C.
The complete question is:
What is the electric field strength at a position measured at r (2.5 m) from a 4.0 mC point source charge?
To know more about electric field strength, refer here:
https://brainly.com/question/15170044#
#SPJ11
A single constant force F = (3.39i + 4.72j) N acts on a 3.51 kg particle. Calculate the work done by this force if the particle moves from the origin to the point of having the vector position r = (1.85i - 2.51j) m. What is the speed of the particle at r if its speed at the origin is 4.51 m/s? What is the change in the potential energy of the system?
The work done by the force is approximately -12.1 J.
The work done by a constant force is given by the equation W = F . d, where F is the force vector, d is the displacement vector, and "." represents the dot product. The displacement of the particle is given by the vector r, so we can calculate the work done as follows:
W = F . d = (3.39i + 4.72j) N . (1.85i - 2.51j) m
= (3.39 x 1.85 + 4.72 x (-2.51)) J
= -12.1 J (to two decimal places)
The speed of the particle at position r can be calculated using the conservation of energy principle. Since no external work is done on the system (i.e., the net work is zero), the initial kinetic energy of the particle is equal to its final kinetic energy plus its change in potential energy. We can solve for the final speed as follows:
Initial kinetic energy = 1/2 mv^2 = 1/2 x 3.51 kg x (4.51 m/s)^2 = 35.8 J
Final kinetic energy = 1/2 mv^2 (where v is the final speed)
Change in potential energy = -W = 12.1 J (from above)
Therefore, 35.8 J = 1/2 x 3.51 kg x v^2 + 12.1 J, which gives v = 5.17 m/s (to two decimal places).
The change in potential energy of the system is equal to the negative of the work done by the force, so it is approximately 12.1 J (as calculated above).
To know more about kinetic energy, click here:
https://brainly.com/question/26472013
#SPJ11
an air bubble doubles in volume as it rises from the bottom of a lake (1000 kg/m3). ignoring any temperature changes, the depth of the lake is approximately 0.76 m 10 m 21 m 4.9 m 0.99 m
In this problem, we are given that an air bubble doubles in volume as it rises from the bottom of a lake with a known density. Using this information, we can calculate the depth of the lake. Since the initial depth is half the final depth, we can use the given information to determine that the depth of the lake is approximately equal to the depth of the bubble at its final volume, which is 0.76 m.
Solution:
According to Boyle's Law, the volume of a gas is inversely proportional to its pressure, assuming constant temperature. Therefore, if the volume of the air bubble doubles as it rises, its pressure is halved. The pressure at any depth in a liquid is given by:
P = ρgh
where P is the pressure, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the depth.
If the pressure is halved, then we can set the initial pressure equal to twice the final pressure:
ρgh = 2ρg(h - d)
where d is the depth of the bubble at the final volume.
Simplifying the equation, we get:
h = 2d
Therefore, the depth of the lake is equal to twice the depth of the bubble at its final volume.
Using the given information that the volume of the bubble doubles, we can infer that the final volume is twice the initial volume, which means the initial depth is half the final depth:
d = 0.5h
Substituting the given values into the equation, we have:
d = 0.5(2d) = d
Therefore, the depth of the lake is approximately equal to the depth of the bubble at its final volume, which is 0.76 m.
To know more about the Boyle's Law refer here :
https://brainly.com/question/1437490#
#SPJ11
Three waves with wavelengths of 10m, 100 m and 200 m are travelling through water that is 2000 m deep. Which wavelength travels fastest? Select one a 100 m Ob. 200 m All move at the same speed od 10 m
Given that water is 2000 m deep, all three waves will be travelling at same speed, as the depth of water is significant enough to make the speed of the wave independent of the wavelength. Therefore, option C, "All move at the same speed," is the correct answer.
The speed of a wave in a medium is dependent on the properties of the medium, such as its density and elasticity. In general, waves with longer wavelengths will travel faster in a given medium than those with shorter wavelengths.
In the case of water waves, the speed is also dependent on the depth of the water. As the depth of the water increases, the speed of the wave increases as well. This is because the deeper water has a higher density and greater elasticity, which allows for faster propagation of the wave.
It is important to note that the speed of the waves would not be the same if the depth of the water was not significant enough to make the speed independent of the wavelength. In shallower water, the longer wavelength waves would travel faster than the shorter wavelength waves. option C, is the correct answer.
Know more about wavelength here:
https://brainly.com/question/4112024
#SPJ11
the total amount of energy in a thermodynamic system is called ___________.
The total amount of energy in a thermodynamic system is called the internal energy.
Internal energy is the sum of all the kinetic and potential energies of the particles that make up a system. This includes the energy associated with the motion of particles (kinetic energy), the energy associated with their position in a field (potential energy), and the energy associated with the interactions between particles (such as chemical bonds).
Internal energy is a state function, which means that it depends only on the current state of the system and not on how the system got there. It is often used to determine how much work can be extracted from a system or how much heat needs to be added to change the state of the system.
Learn more about thermodynamic here :
https://brainly.com/question/1368306
#SPJ11
a hollow cylindrical copper pipe is 1.40 m long and has an outside diameter of 3.90 cm and an inside diameter of 2.30 cm. How much does it weigh? w=?N
The weight of the hollow cylindrical copper pipe is approximately 202.36 N.
To calculate the weight of the pipe, we need to determine its volume and density. The volume of the pipe can be calculated using the formula for the volume of a cylinder: V = πr²h
where r is the radius of the pipe, h is its height (or length), and π is the constant pi (approximately equal to 3.14).
Since we are given the outside and inside diameters of the pipe, we can calculate its radius as: r = (3.90/2 - 2.30/2) × 10⁻² m = 0.80 × 10⁻² m
and its height as: h = 1.40 m
Substituting these values into the formula, we get:
V = π(0.80 × 10⁻²)²(1.40) = 0.0225 m³
The density of copper is approximately 8,960 kg/m³. The mass of the pipe can be calculated as:
m = ρV = 8,960 × 0.0225 = 202.36 kg
Finally, we can convert the mass to weight using the formula:
w = mg = 202.36 × 9.81 = 1986.17 N ≈ 202.36 N (rounded to two decimal places)
To know more about density of copper, refer here:
https://brainly.com/question/1684654#
#SPJ11
31. A hydrogen atom initially at rest and in its ground state absorbs a 100eV photon. If the ejected photoelectron moves in the same direction as the incident photon, find (a) the kinetic energy and speed of the photoelectron and (b) the momentum and energy of the recoiling proton
The hydrogen atom absorbs a 100eV photon, resulting in the ejection of a photoelectron. The kinetic energy and speed of the photoelectron can be determined using the conservation of energy.
The energy of the absorbed photon is equal to the sum of the kinetic energy and the ionization energy (13.6eV) of the electron. Therefore, the kinetic energy of the photoelectron is (100 - 13.6) eV. To convert this to joules, we use the conversion factor [tex]1 eV = 1.6 \times 10^{-19} J[/tex]. The speed of the photoelectron can then be calculated using the equation for kinetic energy, where the kinetic energy is equal to [tex]\frac{1}{2} mv^2[/tex], and solving for v.
The momentum and energy of the recoiling proton can be determined by considering the conservation of momentum and energy in the system. Since the photoelectron and proton move in opposite directions, the momentum of the proton will be equal in magnitude but opposite in direction to the momentum of the photoelectron. The momentum of the proton can be calculated using the equation p = mv, where m is the mass of the proton. The energy of the recoiling proton can be determined by subtracting the kinetic energy of the photoelectron from the energy of the absorbed photon. As the proton is much more massive than the electron, its kinetic energy will be negligible compared to the photon energy. Therefore, the energy of the recoiling proton will be approximately equal to the energy of the absorbed photon (100eV).
In summary, the kinetic energy and speed of the photoelectron are (100 - 13.6) eV and calculated using the equation for kinetic energy, respectively. The momentum of the recoiling proton is equal in magnitude but opposite in direction to the momentum of the photoelectron and can be calculated using the equation p = mv. The energy of the recoiling proton is approximately equal to the energy of the absorbed photon (100eV).
To learn more about photoelectron refer:
https://brainly.com/question/31524918
#SPJ11
Using questions 14 and 15, the Energy lost into heat (J) during the collision of the bullet and catcher is: O 870 O 222 O 0 O 8.7 O 87 O145 O 10 O 3.5
The Energy lost into heat (J) during the collision of the bullet and catcher is O 870.
Based on the given information in questions 14 and 15, we can calculate the kinetic energy of the bullet before collision (1184 J) and the kinetic energy of the catcher after collision (314 J). The difference between these two energies gives us the energy lost into heat during the collision, which is:
1184 J - 314 J = 870 J
Collision - A collision is an event in which two or more bodies exert forces on each other in about a relatively short time.
Therefore, the answer is O 870.
To learn more about Collision visit: https://brainly.com/question/24915434
#SPJ11
a solid metal sphere is given a net charge -q. how is the charge distributed in or on the sphere?
When a solid metal sphere is given a net charge -q, the charge is distributed uniformly over the surface of the sphere. This is due to the fact that metal is a good conductor of electricity, and charges can move freely within its structure.
As a result, when the sphere is given a net charge, the charges will spread out as far as they can on the surface of the sphere, in order to minimize the electrostatic potential energy of the system. This means that the charge will be distributed evenly across the surface of the sphere, and will not accumulate in any one particular area. Additionally, since the sphere is solid, there will be no charge inside the sphere itself. This is because charges can only reside on the surface of the sphere, since the interior is not accessible to them. Therefore, the charge distribution on a solid metal sphere with a net charge -q will be uniform across its surface.
When a solid metal sphere is given a net charge -q, the charge distribution occurs exclusively on the surface of the sphere. This is because metal spheres have free electrons that move to redistribute the charge to reach a state of electrostatic equilibrium. In this case, the negatively charged electrons repel each other, spreading uniformly on the sphere's surface to minimize repulsive forces. The charge density on the sphere's surface will be uniform, as the sphere is symmetrical and the charge experiences an equal repulsive force in all directions. No charge will be found inside the sphere due to the conductive nature of the metal, allowing the charges to move freely and reach an equilibrium state on the surface. In summary, when a solid metal sphere is given a net charge -q, the charge distributes uniformly on its surface and does not penetrate the interior.
To know more about metal sphere visit:
https://brainly.com/question/14435164
#SPJ11
A candle is placed 10 cm in front of a concave mirror with a 40 cm radius of curvature. Find the magnification and classify the image: real or virtual; upright or inverted; and enlarged or reduced.
The magnification is positive, which means the image is upright. Since the magnification is less than 1, the image is reduced in size and is a real image.
To find the magnification and classification of the image formed by a concave mirror, we can use the mirror equation and magnification equation:
1/f = 1/do + 1/di (mirror equation)
m = -di/do (magnification equation)
where:
f = focal length of the mirror
do = object distance (distance of the object from the mirror)
di = image distance (distance of the image from the mirror)
m = magnification
In this case, the object distance is do = -10 cm (since the object is placed in front of the mirror), the focal length is f = -20 cm (since the mirror is concave and has a radius of curvature of -40 cm), and the image distance and magnification are what we want to find.
Using the mirror equation, we can solve for the image distance:
1/-20 = 1/-10 + 1/di
di = -6.7 cm
Now we can use the magnification equation to find the magnification:
m = -di/do = (-6.7 cm) / (-10 cm) = 0.67
The magnification is positive, which means the image is upright. Since the magnification is less than 1, the image is reduced in size. The negative sign for the image distance indicates that the image is formed behind the mirror, which means it is a real image. Therefore, the image formed by the concave mirror is real, upright, and reduced in size.
Learn more about magnification here:
https://brainly.com/question/3851549
#SPJ11
What periglacial process causes vertical movement of soil and rocks? View Available Hint(s) gelifluction frost thrusting patterned ground pingo frost heaving
The periglacial process that causes vertical movement of soil and rocks is frost heaving. Frost heaving occurs when water in the soil freezes and expands, exerting pressure on the surrounding materials.
This expansion can uplift or raise the soil and rocks, leading to vertical movement. The repeated cycles of freezing and thawing result in the gradual displacement of particles, causing the surface to become uneven. Frost heaving is particularly common in cold regions where the ground experiences freezing temperatures and adequate moisture is present. It plays a significant role in shaping the landscape and influencing the formation of features like frost mounds and frost boils.
learn more about vertical here:
https://brainly.com/question/30116773
#SPJ11
which of the following wireless technologies cannot travel through walls or other obsticles?
Infrared technology is the wireless technology that cannot effectively travel through walls or other obstacles. Infrared technology utilizes infrared light to transmit data wirelessly.
The wireless technology that cannot travel through walls or other obstacles is infrared technology. Infrared technology utilizes infrared light to transmit data wirelessly. However, infrared signals have limitations when it comes to passing through walls or obstacles. Infrared signals are highly directional and operate using line-of-sight communication. They require a direct and unobstructed path between the transmitter and receiver for effective communication. If there are walls, objects, or obstacles blocking the line of sight, the infrared signals will not be able to pass through and establish a connection.
Learn more about Infrared technology here:
https://brainly.com/question/29382487
#SPJ11
two media of different impedance are joined together. describe how their impedance will determine the amplitude of a wave that is partly transmitted and reflected at the media’s interface
The higher the impedance mismatch between the two media, the greater the amplitude of the reflected wave compared to the transmitted wave.
When two media of different impedance are joined together, there will be a partial reflection and transmission of the wave at the interface. The amount of reflection and transmission will be determined by the difference in impedance between the two media. Impedance is the measure of a material's resistance to the flow of a wave.
If the impedance of the first medium is greater than that of the second medium, the wave will experience more reflection and less transmission at the interface. This is because the impedance mismatch creates a barrier that prevents the wave from passing through easily. As a result, the amplitude of the reflected wave will be greater than that of the transmitted wave.
On the other hand, if the impedance of the first medium is less than that of the second medium, the wave will experience more transmission and less reflection at the interface. This is because the wave will pass through the second medium more easily than the first medium. As a result, the amplitude of the transmitted wave will be greater than that of the reflected wave.
In summary, the impedance of two media determines the amount of reflection and transmission of a wave at their interface. The higher the impedance mismatch between the two media, the greater the amplitude of the reflected wave compared to the transmitted wave.
To know more about Impedance visit:
https://brainly.com/question/30040649
#SPJ11
why the temperature change produced by a given amount of heat depends on the nature of the substance and its mass.
The temperature change produced by a given amount of heat depends on the nature of the substance and its mass because different substances have different specific heat capacities.
The specific heat capacity of a substance is the amount of heat energy required to raise the temperature of one gram of the substance by one degree Celsius.
Different substances have different specific heat capacities due to differences in their molecular structures and the way their atoms and molecules interact with each other. F
or example, water has a higher specific heat capacity than most other common substances, which means it takes more heat energy to raise the temperature of water than it does to raise the temperature of other substances by the same amount.
The mass of a substance also affects the temperature change produced by a given amount of heat. The more mass a substance has, the more heat energy it can absorb before its temperature changes significantly.
To know more about specific heat capacities, refer here:
https://brainly.com/question/14646878#
#SPJ11
under constant-pressure conditions a sample of hydrogen gas initially at 37.00°c and 9.90 l is cooled until its final volume is 3.30 l. what is its final temperature?
The final temperature of the hydrogen gas sample is 111.00°C.
In order to determine the final temperature of the hydrogen gas sample, we can use the ideal gas law, which relates pressure, volume, temperature, and number of moles of gas:
PV = nRT
where
P = pressure
V = volume
n = number of moles of gas
R = ideal gas constant
T is temperature
Since the problem states that the conditions are constant-pressure, we can assume that the pressure remains the same throughout the process.
so we can simplify the equation to:
V/T = nR/P
Since we are dealing with the same sample of hydrogen gas throughout the process, we can assume that n and R are constant.
Therefore, we can rewrite the equation as:
V1/T1 = V2/T2
where
V1 = initial volume
T1 = initial temperature
V2 = final volume
T2 = final temperature.
To solve the T2 by rearranging the equation:
T2 = T1(V1/V2)
Put the values from the problem, we get:
T2 = 37.00°C (9.90 L / 3.30 L) = 111.00°C
Therefore, the final temperature of the hydrogen gas sample is 111.00°C.
know more about hydrogen gas here:
https://brainly.com/question/31428512
#SPJ11