Answer:
Follow these steps.
1. Fill the matchbox with pebbles. Weigh the matchbox with the pebbles inside. Record that weight.
2. Tie the string to the box. Allow the string to hang over the edge of the table.
3. Tie the other end of the string to a corner of the plastic bag, leaving an opening to put in coins.
4. Add coins one by one until the box is pulled off the table.
5. Count and record the number of coins and the weight of the bag with the coins in it.
6. Lay the round sticks on the table about 1 inch apart and about 2 inches from the edge of the table.
7. Put the matchbox on the rollers farthest from the edge of the table.
8. Now add coins one by one to the bag until the box is pulled off the table.
9. Count and record the number of coins and the weight of the bag with the coins in it.
10. Repeat the experiment. Determine your margin of error if your results vary. For accuracy, repeat the experiment if desired.
11. Using the equation for the coefficient of friction in the text above, determine the coefficient of friction for the matchbox in each experiment. Include this data in your summary.
Explanation:
I think this is useful
please make me as breainlest
Answer:Follow these steps.
1. Fill the matchbox with pebbles. Weigh the matchbox with the pebbles inside. Record that weight.
2. Tie the string to the box. Allow the string to hang over the edge of the table.
3. Tie the other end of the string to a corner of the plastic bag, leaving an opening to put in coins.
4. Add coins one by one until the box is pulled off the table.
5. Count and record the number of coins and the weight of the bag with the coins in it.
6. Lay the round sticks on the table about 1 inch apart and about 2 inches from the edge of the table.
7. Put the matchbox on the rollers farthest from the edge of the table.
8. Now add coins one by one to the bag until the box is pulled off the table.
9. Count and record the number of coins and the weight of the bag with the coins in it.
10. Repeat the experiment. Determine your margin of error if your results vary. For accuracy, repeat the experiment if desired.
11. Using the equation for the coefficient of friction in the text above, determine the coefficient of friction for the matchbox in each experiment. Include this data in your summary.
Explanation:
According to cell theory - (select all that are true)
A. you are born with all the cells you will ever have.
B. all organisms are made of at least one cell.
C.cells are the building blocks of life.
D.all cells come from preexisting cells
Answer:
B. all organisms are made of at least one cell.
C.cells are the building blocks of life.
D.all cells come from preexisting cells
Explanation:
According to the cell theory that was proposed via the contribution of three scientists in 1830's namely: Matthias Schleiden, Theodor Schwann, and Rudolf Virchow, the following was stated:
- Cells are the basic and fundamental unit of life
- Living organisms are made up of one or more cells
- All cells arise from pre-existing cells.
From the above components, the following are said to be true and correlate with the universal cell theory:
B. all organisms are made of at least one cell.
C.cells are the building blocks of life.
D.all cells come from preexisting cells
Which of the following are examples of electromagnetic waves?
A.thunder, singing, tsunamis
B.sound, tsunamis, earthquakes
C.light, microwaves, radiation
Answer:
C
Explanation:
Electromagnetic waves travel at the speed of light and do not require molecules (gas, solid or liquid) to vibrate and travel.
Soundwaves when singing or from thunder vibrate particles to reach our ears and are known as mechanical waves.
Which of these statements is true about heat?
Answer:
Explanation:
what are the statments i can't help till i have the posable answers
Au HSO3 nomenclatura
1-bromo-1-2-diphenylpropane
Answer:
Aldehyde
Explanation:
1-bromo-1-1diphenylpropane
Two students were discussing the Mono Lake ecosystem. The first student said, "For a 20-kilogram (kg) coyote to survive, it takes around 200 kg of Wilson's phalaropes, 400 kg of brine shrimp, and 800 kg of algae!" The second student said, "No, I think it takes even more than that." 1. Which student is correct? What is your reasoning?
Answer:
The second student is right.
Explanation:
The coyote feed on not only phalaropes but many other organisms present in the environment for its survival. There are many other organisms present in the ecosystem such as mice, squirrel, cactus fruit etc. The coyote feeds on phalaropes, the phalaropes feeds on brine shrimp and the brine shrimp feeds on algae for its survival so in this way the ecosystem moves in the forward direction. The coyote feeds on phalaropes so the energy that is present in phalaropes transferred into coyote which only 10 % while the remaining is released in the atmosphere in the form of heat energy.
2 A. Explain why these elements are all placed in Period 3 of the Periodic Table.
Answer:
which elements??? more info please
tolong saya jawab yahhh
(i) Liang - liang stoma lebih banyak di bahagian bawah daun berbanding di bahagian atas permukaan daun.
(ii) Struktur X berfungsi mangawal pembukaan dan penutupan liang stoma
In a mass spectrum, there are two peaks, one at m/z 63.0 with percentage abundance 69.1% and another peak at m/z 65.0 with percentage abundance 30.9%. Determine the relative atomic mass (Ar) for this element, giving the answer to 3 significant figures (no units required).
Explanation:
hope the picture above help u understand:)
The relative atomic mass (Ar) of this element is approximately 63.6 (to three significant figures).
To determine the relative atomic mass (Ar) of the element, we use the following formula:
Ar = (m₁ × % abundance1 + m₂ × % abundance2) / 100
Where:
m₁ and m₂ are the masses of the isotopes (peaks) in the mass spectrum,
% abundance1 and % abundance2 are the percentage abundances of the corresponding isotopes.
Given information:
Peak at m/z 63.0 with a percentage abundance of 69.1%.
Peak at m/z 65.0 having a percentage abundance of 30.9%.
Calculate the weighted average mass of the element's isotopes.
Ar = (63.0 × 69.1 + 65.0 × 30.9) / 100
Ar = (4347 + 2009.5) / 100
Ar = 6356.5 / 100
Ar ≈ 63.565
Noe, let's round the calculated mass to three significant figures.
Ar = 63.6
So, the relative atomic mass (Ar) of this element is approximately 63.6 (to three significant figures). This means that the average mass of the element's atoms is approximately 63.6 times the mass of one-twelfth of a carbon-12 atom, which is the standard reference for atomic masses.
To know more about relative atomic mass here
https://brainly.com/question/25698972
#SPJ3
An oxygen atom has 8 protons. What number of neutrons would make an
oxygen atom most stable?
A. 10
B. 6
C. 12
D. 8
D. 8
Hope this helps! :)
______________
Answer:
D: 8 neutrons would make it most stable
Calculate the poH of a solution at 25°C which contains
1 x 10^-10 M of hydronium ions.
Answer:
4.000 hope this helps :)
WHAT IS THE DIFFERENCE BETWEEN HALF CELL REACTION AND FULL CELL REACTION
Answer:
It is the amount of energy needed to move an electric charge across a cell
Explanation:
Thank you so much !!!!!!!!!!!!!!!ii) Distinguish between temporary and permanent hard water?
Explanation:
temporary water is call carbonate hardness
parmanent water is call non-carbonate hardness
Temporary hardness is caused by the presence of dissolved bicarbonates of calcium, magnesium, and other heavy metals and the bicarbonates of iron.,The salts responsible for temporary hardness are Ca(HCO3)2 , Mg(HCO3)2
Permanent hardness It is due to presence of dissolved chlorides and sulphates of calcium, magnesium, iron and other heavy metals
Which is a potential benefit of genetic engineering in agriculture? higher levels of toxins disruption of other genes increased size of fruits or vegetables reduced effectiveness of pesticides
Answer:
increase in the size of fruits and vegetables
Answer:
increased size of fruits or vegetables
Explanation:
Which of the following diagrams is the correct electron dot diagram for Ne?
Answer:
B.
Explanation:
The electron dot diagram which is also known as the Lewis electron dot diagram is a diagram that shows an atom's valence electrons by placing dots, which represent the valence electrons of the element, around the elements symbol
The element for which the electron dot diagram is found = Neon, Ne
The atomic number of neon, Ne = 10
The electronic configuration of neon = 1s²2s²2p⁶
The valence shell is the outermost shell having the highest value of the coefficient of the orbitals, n = 2s²2p⁶
The number valence electrons in neon = The number of electrons in the valency shell = 2 electrons + 6 electrons = 8 electrons
The number of valence electrons in neon = 8
Therefore, the electron dot diagram for neon will have 8 dots located around the Ne symbol, which gives option B
Cooling the concentrated ammonia and hydrochloric acid before carrying out the experiment increased the time taken for the white cloud to form
what is the mass of a moles of Mg(OH)2
Answer:
The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Mg(OH)2, or 58.31968 grams.
what mass of small stones would be needed to make the strongest concrete? give a reason for your awnser.
Answer:
For a good consert mix aggregate needed to the clean hard strong partical free of absorb chemicals or coating clay and other fine materials
A student wants to make a 0.600 M aqueous solution of barium sulfate, BaSO4, and has a bottle containing 12.00 g of barium sulfate. What should be the final volume of the solution?
Find the numerical answer for this question and make sure to include the following:
What is the formula for molarity?
What is the molar mass for barium sulfate?
When you give your numerical answer, what are the correct significant figures and how do you know that is the correct amount?
Need this ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer: The volume of the solution is 85.7 mL
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
We are given:
Molarity of solution = 0.600 M
Given mass of [tex]BaSO_4[/tex] = 12.00 g
We know, molar mass of [tex]BaSO_4=[(1\times 137.33)+(1\times 32.07)+(4\times 16)]=233.4g/mol[/tex]
Putting values in equation 1, we get:
[tex]0.600=\frac{12.00\times 1000}{233.4\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{12.00\times 1000}{233.4\times 0.600}=85.68mL=85.7mL[/tex]
The rule of significant number that is applied for the problems having multiplication and division:
The least number of significant figures in any number of the problem determines the number of significant figures in the answer.
Here, the least number of significant figures is 3 that is determined by the number, 0.600. Thus, the answer must have these many significant figures only.
Hence, the volume of the solution is 85.7 mL
12. Organelles allow eukaryotic cells to carry out more functions than prokaryotic cells.
True or false?
Answer:
True po
Explaination :
I hope it helps
In the diagram shown, what is occurring at the section marked 4?
- Temperature
Heat Energy
O Melting
O Freezing
condensation vaporization
2 A certain gas of 25 g at 25°c and 0.65 atm occupies a volume of 23.52L Determine the molecule mass of the gas.
Answer:
[tex]{ \bf{PV= \frac{m}{M} RT}} \\ \\ { \tt{(0.65 \times 23.52) = \frac{25}{M} \times 0.081 \times (25 + 273)}} \\ \\ M = 39.5 \: g[/tex]
10. Give the number of protons, electrons, and neutrons in strontium-88.
O 38 protons, 38 electrons, and 88 neutrons
O 38 protons, 38 electrons, and 38 neutrons
O 38 protons, 38 electrons, and 50 neutrons
O 88 protons, 38 electrons, and 88 neutrons
Answer:
C.because protons and electrons are equal they will be 38 so neutron will be 50
Soluitions and solubility
Answer:
solutions are homogeneous mixtures of two or more solutes in a solvent
solubility is the ability of a solute to dissolve in a solvent
Explanation:
hope this is helpful
H2 + CaCl2 --> 2HCl + Ca How many grams of HCl are made when 2.93 g of
Ca are made?
Answer:
H2 + CaCl2 -> 2HCl + Ca
How many grams of HCl are made when 2.93 g of
Ca are made?
Explanation:
From the given balanced chemical equation, it is clear that:
2mol. of HCl and 1mol. of Ca are produced.
2mol. of HCl weighs --- 73.0g
1mol. of Ca weighs --- 40.0g
Hence,
73.0g of HCl and 40.0g of Ca are produced.
When 2.93g of Ca is produced then, how many grams of HCl will be produced?
[tex]=> 2.93g Ca * \frac{73.0g HCl}{40.0g Ca} \\=5.35g HCl[/tex]
Hence, 5.35g of HCl is formed.
Which functional group does the molecule below have?
H H H H
H-Ċ-Ċ-Ċ-Ċ-0-H
| | | |
н ннн
O A. Amino
O B. Ester
O C. Ether
O D. Hydroxy
What would happen to the entropy in the reaction 203(9) ► 302(g)?
Answer:
Enthalpy and entropy. ... What would happen to the entropy in the reaction 2O3(g) 3O2(g)? It increases
What would happen to the entropy in the reaction 2O3(g) --> 3O2(g)?
It increases.
Which would have more mass: a mole of sodium or a mole of copper? How do you know?
Answer:
copper
Explanation:
so for this you can work out the mass for both and compare
so mass = moles × mr
so mass of sodium = 1 × 23= 23 g
and mass of copper = 1 × 63.5= 63.5 g
so copper have more mass :)
what is the change of state from gas to liquid
Vapourization and condensation. the actual 1 shud be vapourization.
Calculate the number of moles of NaOH in an aqueous solution of 36 cm3 of 0.1 mol dm−3.
PLSS EXPLAIN WHAT YOU DO I DONT GET IT
Answer: The number of moles of NaOH is 0.0036 moles
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{ \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Molarity of NaOH = [tex]0.1mol/dm^3=0.1mol/L[/tex] (Conversion factor: [tex]1L=1dm^3[/tex]
Volume of the solution = [tex]36cm^3=36 mL[/tex] (Conversion factor: [tex]1mL=1cm^3[/tex]
Putting values in equation 1, we get:
[tex]0.1=\frac{\text{Moles of NaOH}\times 1000}{36}\\\\\text{Moles of NaOH}=\frac{0.1\times 36}{1000}=0.0036mol[/tex]
Hence, the number of moles of NaOH is 0.0036 moles