Answer:
I think they have high, because the nonpolar molecules usually have a much lower surface tension than polar ones.
Identify the atom oxidized, the atom reduced, the oxidizing agent, and the reducing agent.
SO2+ 2H2S----> 3S + 2H2O
Explanation:
here is the answer bae. Feel free to ask for more chem help
Which statement best describes wave-particle duality as it applies to electrons?
A. The electrons present in radio waves and microwaves act more like particles than waves.
B. Electrons are particles that emit waves of radiation when they move from higher energy levels to lower energy levels.
с.Electron clouds can be understood as clumps of particles held near one another by wave forces.
D.Electrons can be modeled as waves in some situations and as particles in other situations.
Answer:
D es pero que te ayude amigo
The student is now told that the four solids, in no particular order, are aluminum chloride (AlCl3AlCl3), sugar (C6H12O6C6H12O6), butanoic acid (C3H7COOHC3H7COOH), and potassium bromide (KBrKBr), and potassium bromide (KBr). Assuming that conductivity is correlated to the number of ions in solution, rank the four substances based on how well a 0.20 M solution in water will conduct electricity. Rank from most conductive to least conductive. To rank items as equivalent, overlap them.
Answer:
aluminum chloride> potassium bromide> butanoic acid> sugar
Explanation:
Conductivity has to do with the ability of a solid to dissolve in solution leading to the formation of mobile ions which are the charge carriers in solution.
Strong electrolytes produce more ions in solution hence they have a higher conductivity.
Aluminum chloride produces four particles in solution hence it has the highest conductivity followed by potassium bromide which produces two particles in solution. Butanoic acid is a weak electrolyte which dissociates only to a small extent while sugar is a nonelectrolyte, it does not dissociate at all in solution.
SOMONE HELP DUE IN 5 MINUTES
Answer:
Silicon
Explanation:
Nucleus
14 protons
Group 14
Number 14
+4, +2, or -4
Answer:
Explanation:
Name of the part of this atom labeled z is nucleus.
number of protons is 14 .
the given element is silicion and it lies in group 14.
the no of period that contains this element is 3.
charge formed on the ion formed from this atom is positive charge because it gives 4 electron to other element .
If the element gains the electron then it has negative charge where as when it loses it will have positive charge.
two reactants to produce sodium carbonate salt?
Answer: equivalent amounts of sodium hydroxide and a solution of sodium hydrogen carbonate
Explanation:
Helppppp plz ASAP DON’T GUESS
Explanation:
A B C D isme koyi ans hain doond lo
Draw the structure formula of 2methylbutanoate
Answer:
[tex]CH _{3}CH(CH _{3})CH _{2}COO {}^{ - } \\ \\ [/tex]
If 3.02 g of CuNO3 is dissolved in water to make a 0.560 M solution, what is the volume of the solution in milliliters?
Answer: The volume of the solution is 28.75 mL
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Molarity of copper nitrate = 0.560 M
Given mass of copper nitrate = 3.02 g
Molar mass of copper nitrate = 187.56 g/mol
Putting values in equation 1, we get:
[tex]0.560=\frac{3.02\times 1000}{187.56\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{3.02\times 1000}{187.56\times 0.560}=28.75mL[/tex]
Hence, the volume of the solution is 28.75 mL
in which of the following type of colloid, the physical state of dispersed phase and dispersion medium is same?
Gel
Foam
Emulsion
Aerosol
Answer:
Emulsion
Explanation:
According to Oxford dictionary, a colloid is, ''a homogeneous non-crystalline substance consisting of large molecules or ultramicroscopic particles of one substance dispersed through a second substance. Colloids include gels, sols, and emulsions; the particles do not settle, and cannot be separated out by ordinary filtering or centrifuging like those in a suspension.''
An emulsion is a dispersion of a liquid in a liquid. This means that the the physical state of dispersed phase and dispersion medium is same.
Examples of emulsions include; Vinaigrette, homogenized milk and hair cream.
If a tornado causes considerable damage with wind speeds of 111 to 135 miles per hour, it’s classified as _______ on the Enhanced Fujita Scale.
The type of major storm called a/an _______ is driven primarily by the Coriolis effect.
The weather pattern that stays over one area for an extended period of time is known as _______.
What are the two types of downbursts, and how are they different?
How is a funnel cloud different from a tornado?
Why does a hurricane begin to dissipate after it makes landfall?
Explain how the heat index and the wind chill index are similar and different.
What type of severe weather prevents sweat from evaporating to cool down bodies?
Answer:
EF-2
hurricane/tropical cyclone
recurrent weather
The two types of downbursts are macrobursts and microbursts. A macroburst affects an area that's greater than 2.5 miles across. A microburst affects an area that's less than 2.5 miles across.
A funnel cloud forms as a spinning column of air that descends from a thundercloud. However, a funnel cloud doesn't become a tornado until it actually touches the ground. Once it touches the ground, where it begins to pick up dust and debris, it becomes a tornado.
Tropical cyclones, such as hurricanes, are fueled by warm ocean waters. Once they make landfall, they lose this fuel source and begin to lose strength.
The heat index and the wind chill index are similar because both consider other factors that affect how air temperature feels. The heat index considers relative humidity in relation to air temperature. Higher humidity makes air temperatures feel hotter. The wind chill index considers wind speed in relation to air temperature. Higher wind speeds make air temperatures feel colder.
Heat waves—Heat waves can be very dangerous when accompanied by high humidity. The human body depends on evaporation of sweat to cool itself down on hot days. When humidity levels are high, the rate of evaporation slows down. Consequently, it becomes harder for the body to cool itself and much easier for the body to overheat.
Explanation:
took the testoronee
which metals or non-metals are liquid at a room temperature of 25°C?
Answer:
gallium
Explanation:
it is the old melting in a hot cup of coffee spoon
Answer:
Elements That Are Liquid at 25°C
•Bromine
•mercury
Explanation:
The metal which exist as a liquid at room temperature is mercury.
Non-metal which exist as a liquid at room temperature is bromine.
was this answer helpful?
yes or no?
if yes give like
thankyou
Which reaction will most likely take place based on the activity series? Li > K Ba CaNa > Mn > Zn > Cr> Fe> Cd Ni > H > Sb > Cu > Ag > Pd > Hg > Pt a. Ag+FeCl 3 b, Zn + CaO C. Ba+Na 2 CO 3 d . Cr+KNO3
Answer:
Among the given reactions,
a. Ag+FeCl 3
b, Zn + CaO
C. Ba+Na 2 CO 3
d . Cr+KNO3
which reaction is likely to take place based on the reactivity series?
Explanation:
The metal reactivity series is:
Li > K> Ba >Ca>Na > Mn > Zn > Cr> Fe> Cd Ni > H > Sb > Cu > Ag > Pd > Hg > Pt
The highly reactive metal will displace the less reactive metal from its compound during a displacement reaction.
a. Ag+FeCl 3
Ag is less reactive than Fe, so Ag cannot displace Fe from its compound.
This reaction also does not occur.
b, Zn + CaO
Zn is less reactive than Ca, so it cannot displace Ca from its compound.
This reaction does not occur.
C. Ba+Na 2 CO 3
Ba is more reactive than Na, so Ba displaces Na from its compound.
This reaction is possible.
d . Cr+KNO3
Cr is less reactive than K, so it cannot displace K from its compound.
Hence, This reaction is not possible.
Answer:
option c) Ba+Na 2 CO 3 -> BaCO3 +2Na
Answer:
C. Ba+Na 2 CO 3 -> BaCO3 +2NaWhich are the fundamental particles whose masses are mainly responsible for the mass of an atom?Give Reason
No links
Answer:
Proton & neutron
Explanation:
electrons only affect the charge. neutrons affect the mass and stability of an atom.
Será lançado na próxima quarta-feira, 1º de julho, em São Bernardo do Campo (SP), o primeiro ônibus brasileiro a hidrogênio. [...] O projeto Ônibus Brasileiro à Célula Combustível a Hidrogênio é o ponto de partida para o desenvolvimento de uma solução mais limpa para o transporte público urbano no Brasil. (Disponível em: Acesso em: 19 out. 2009.) Quanto aos processos químicos envolvidos na produção de energia elétrica em células de combustíveis a partir do oxigênio e do hidrogênio, é correto afirmar:
what is the formula for number of moles?
Answer:
number of moles=volume/molar volume or mass/molar mass
The frequency of an X ray is 6.5 x 1018 Hz. What is the X ray’s wavelength? .
Answer:
The X ray’s wavelength is 4.61*10⁻¹¹ m
Explanation:
Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave's disturbance propagates along its displacement. Relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:
v = f * λ.
In this case:
The frecuency f= 6.5*10¹⁸ Hz The speed v=c= 3*10⁸ [tex]\frac{m}{s}[/tex]Replacing:
3*10⁸ [tex]\frac{m}{s}[/tex]= 6.5*10¹⁸ Hz* λ
Solving:
[tex]wavelength= \frac{3*10^{8} \frac{m}{s} }{6.5*10^{18} Hz}[/tex]
λ= 4.61*10⁻¹¹ m
The X ray’s wavelength is 4.61*10⁻¹¹ m
Read the following reactions. Reaction 1: CaO(s) + CO2(g) → CaCO3(s) Reaction 2: H2O(g) → H2O(l) Which reaction leads to an increase in entropy? Only Reaction 1 Only Reaction 2 Both Reaction 1 and 2 Neither Reaction 1 nor 2
Answer: In the given reactions neither reaction 1 nor 2 reaction leads to an increase in entropy.
Explanation:
The degree of randomness present in the molecules of a substance is called entropy.
In gases, molecules are held by weak forces due to which they move apart from each other. Hence, they have high entropy.
In liquids, molecules are a little close to each other so they have less entropy than gases.
In solids, molecules are tightly held together so they have least or negligible entropy.
As reaction 1 is [tex]CaO(s) + CO_{2}(g) \rightarrow CaCO_{3}(s)[/tex] and it shows that product is in solid state. Therefore, entropy is decreasing.
As reaction 2 is [tex]H_{2}O(g) \rightarrow H_{2}O(l)[/tex] and it shows that gas is converted into liquid. Therefore, entropy is also decreasing here.
Thus, we can conclude that in the given reactions neither reaction 1 nor 2 reaction leads to an increase in entropy.
Answer: Neither Reaction 1 nor 2
Explanation:
How do I solve for a and b using the Van Der Waals equation using only the given values: P= 1 atm, V= 1.310 L, and T= 160 K
Answer:
[tex]a = \frac{24.79078- 1.7161b}{1.310 - b}[/tex]
[tex]b = 1.310 - \frac{22.5427}{a - 1.7161}[/tex]
Explanation:
Given
[tex]P = 1\ atm[/tex]
[tex]V = 1.310\ L[/tex]
[tex]T =160\ K[/tex]
Required
Solve for a and b
Van Der Waals equation is:
[tex]P = \frac{RT}{V - b} - \frac{a}{V^2}[/tex]
Substitute values for P, V and T, we have:
[tex]1 = \frac{R*160}{1.310 - b} - \frac{a}{1.310^2}[/tex]
R is a constant and the value is:
[tex]R = 0.0821[/tex]
So, the equation becomes:
[tex]1 = \frac{0.0821*160}{1.310 - b} - \frac{a}{1.310^2}[/tex]
Simplify the expression
[tex]1 = \frac{13.136}{1.310 - b} - \frac{a}{1.7161}[/tex] ----- (a)
Solving for (a):
[tex]1 + \frac{13.136}{1.310 - b} = \frac{a}{1.7161}[/tex]
Multiply both sides by 1.7161
[tex]a = [1 + \frac{13.136}{1.310 - b}] * 1.7161[/tex]
Take LCM
[tex]a = [\frac{1.310 - b+13.136}{1.310 - b}] * 1.7161[/tex]
Evaluate like terms
[tex]a = [\frac{14.446- b}{1.310 - b}] * 1.7161[/tex]
Open bracket
[tex]a = [\frac{24.79078- 1.7161b}{1.310 - b}[/tex]
Solving for (b), we have:
[tex]1 + \frac{13.136}{1.310 - b} = \frac{a}{1.7161}[/tex]
Subtract 1 from both sides
[tex]\frac{13.136}{1.310 - b} = \frac{a}{1.7161}-1[/tex]
Take LCM
[tex]\frac{13.136}{1.310 - b} = \frac{a-1.7161}{1.7161}[/tex]
Inverse both sides
[tex]\frac{1.310 - b}{13.136} = \frac{1.7161}{a - 1.7161}[/tex]
Multiply both sides by 13.136
[tex]1.310 - b = 13.136 * \frac{1.7161}{a - 1.7161}[/tex]
[tex]1.310 - b = \frac{22.5427}{a - 1.7161}[/tex]
Collect like terms
[tex]b = 1.310 - \frac{22.5427}{a - 1.7161}[/tex]
0.30 kg cart moves on an air track at 1.2 m/s.It collides with and sticks to another cart of mass 500 g,which was stationary before collision. What is the velocity of the combined carts after collision?
a shiny brown colured metal onhaeting in air becomes black in colour when hydrogen gas is passed over the black substance it regain its original colour a]what type of chemical reaction takes place in each of the two given steps
Oxidation reaction
Hope this helps! :)
The expression below was formed by combining different gas laws. V is proportional to StartFraction n T over P EndFraction. Which law was used to determine the relationship between the volume and the number of moles in this equation?
Answer:
The Ideal gas law
Explanation:
From the given question, we have:
V [tex]\alpha[/tex] [tex]\frac{nT}{P}[/tex]
where each variable has its usual meaning.
Thus,
V = [tex]\frac{nRT}{P}[/tex]
where R is the ideal gas constant
cross multiply to have;
PV = nRT
This implies that the volume of the gas is directly proportional to the number of moles of the gas.
Therefore, the law can be used to determine the relationship between the volume and number of moles is the ideal gas law.
When does the electron shown release the greatest amount of energy as it moves from one level to another
Answer:
s1 to GS as the amount of energy required to remove the electron is greatest when it is closest to the nucleus.
Explanation:
Fun facts:
When the electron changes levels, it decreases energy and the atom emits photons. The photon is emitted with the electron moving from a higher energy level to a lower energy level. The energy of the photon is the exact energy that is lost by the electron moving to its lower energy level.
Answer:
The answer is: S.1 to G.S
Hope this helpss :) <3
Explanation:
Which is TRUE about 'acidified' water acting on rocks?
Please give 1 answer.
A.
Peaty soil water does not cause weathering
B.
Limestone is eroded faster than basalt rock by this type of weathering
c.
It is an example of physical weathering
D.
Nearly neutral water will not weather rocks
How much energy does a 930 nm wave of light have? (The speed of light in a vacuum is 3.00 x 108 m/s, and Planck's constant is 6.626 x 10-34 J·s.)
A. 4.68 x 10^18 J
B. 2.14 x 10^-19 J
C. 1.85 x 10^-31 J
D. 4.21 x 10^35 J
Answer:
B. 2.14 x 10^-19 J
Explanation:
The energy of a wave of light can be obtained using the equation:
E = h*c/λ
Where E is the energy in joules,
λ is wavelength = 930nm = 930x10⁻⁹m
h = Planck's constant = 6.626x10⁻³⁴Js
c = Speed of light = 3.00x10⁸m/s
Replacing:
E = 6.626x10⁻³⁴Js*3.00x10⁸m/s/930x10⁻⁹m
E = 2.14x10⁻¹⁹J
Right option is:
B. 2.14 x 10^-19 J
definition of boiling point
Answer:
boiling point, temperature at which the pressure exerted by the surroundings upon a liquid is equaled by the pressure exerted by the vapour of the liquid; under this condition, addition of heat results in the transformation of the liquid into its vapour without raising the temperature.
Explanation:
Radhe Radhe❤
Explanation:
The point at which a matter melts is called boiling or melting point.
What does Seltzer Water have in common with Limestone ?
Tea contains which acid?
A
Tannic acid
B
Tartaric acid
C
Carbonic acid
D
Citric acid
Find the boiling point of a solution of 2.00 m solution of sodium chloride, NaCl, in water (kb= 0.512°C, bp= 100.0°C)
Answer: Boiling point of the given solution is [tex]102.048^{o}C[/tex].
Explanation:
Given: Molality = 2.00 m
[tex]k_{b} = 0.512^{o}C[/tex]
Now, equation for dissociation of water is as follows.
[tex]H_{2}O \rightarrow H^{+} + OH^{-}[/tex]
As it is giving 2 ions upon dissociation. So, the value of i = 2.
Formula used to calculate change in temperature is as follows.
[tex]\Delta T = i \times k_{b} \times m[/tex]
where,
i = Van't Hoff factor
[tex]k_{b}[/tex] = molal boiling point elevation constant
m = molality
Substitute the values into above formula as follows.
[tex]\Delta T = i \times k_{b} \times m\\= 2 \times 0.512^{o}C \times 2.00 m\\= 2.048^{o}C[/tex]
As the boiling point of water is [tex]100^{o}C[/tex]. Hence, the boiling point of solution will be as follows.
[tex]\Delta T^{'}_{b} = 100^{o}C + 2.048^{o}C\\= 102.048^{o}C[/tex]
Thus, we can conclude that boiling point of the given solution is [tex]102.048^{o}C[/tex].
Roundup, a herbicide manufactured by Monsanto, has the formula C3H8NO5P. How many moles of molecules are there in a 647.3-g sample of Roundup?
I got the answer 2.305 x 10^24 but for some reason it’s not working. Is it the wrong one?
Answer:
3.830177515 moles
Explanation:
You have :
647.3 g of RoundupMolar mass of Round up which is equal to 169 g.moland the formula: n=m/MTherefore: n=647.3/169
=3.830177515 moles
Teniendo en cuenta la siguiente reacción quimica: Mn (NO3)2 + NaBiO; + HNO, HMnO₂+ Bi (NO3)3 + NaNO3 + H₂O ¿Cuánto Bi (NO₂), se obtiene a partir de 650 g de Mn (NO₂)2 y 700 g de NaBiO, si la eficiencia del proceso es de un 80%?
Answer:
La masa de Bi (NO₃) ₃ producida es de aproximadamente 2.117,09 gramos
Explanation:
La ecuación química de la reacción se presenta como sigue;
2Mn (NO₃) ₂ + 5NaBiO₃ + 14HNO₃ → 2HMnO₄ + 5Bi (NO₃) ₃ + 5NaNO₃ + 7H₂O
La masa dada de Mn (NO₃) ₂ = 650 g
La masa de NaBiO₃ = 750 g
El número de moles de Mn (NO₃) ₂ = 650 g / (178.95 g / mol) ≈ 3.63 moles
El número de moles de NaBiO₃ = 750 g / (279.968 g / mol) ≈ 2.68 moles
Por lo tanto, el NaBiO₃, es el reactivo limitante, y el rendimiento teórico de Bi (NO₃) ₃ ≈ 5/2 × 2.68 = 6.7 moles
Dado que la eficiencia del proceso es del 80%, el rendimiento real de Bi (NO₃) ₃ = 0,8 × 6,7 moles = 5,36 moles de Bi (NO₃) ₃
La masa molar de Bi (NO₃) ₃ ≈ 394,98 g / mol
La masa de Bi (NO₃) ₃ = 394,98 g / mol × 5,36 moles ≈ 2,117,09 g
La masa de Bi (NO₃) ₃ produjo ≈ 2,117.09 g