Ann has 60 $1 bills, 5 $10 bills, and 20 $20 bills.
Let's assume Ann has $1x, $10y, and $20z bills.
From the given information, we can write two equations based on the relationships between the numbers of bills:
z = 4y (Ann has four times as many $20 bills as $10 bills)
x = 3z (Ann has three times as many $1 bills as $20 bills)
We know that the total amount of money Ann has is $204, so we can write a third equation:
x + 10y + 20z = 204
Now we can use substitution method here, substitute equation 2 into equation 1 to get:
z = 4y
x = 3z
x = 3(4y) = 12y
Substituting these equations into equation 3, we get:
12y + 10y + 20(4y) = 204
42y = 204
y = 4.86
Since y must be a whole number (representing the number of $10 bills), we can round up to y = 5.
Using equation 1, we can find that z = 4y = 20 (representing the number of $20 bills).
Using equation 2, we can find that x = 3z = 60 (representing the number of $1 bills).
Learn more about substitution method here
brainly.com/question/14619835
#SPJ4
The given question is incomplete, the complete question is:
Ann has $ 1, $10, and $20 bills. She has 4 times as many $20 bills as $10 bills. She has 3 times as many $1 bills as $20 bills. She has a total of $204 .What is the number of $1, $10, and $ 20 bills she has
The first term of a sequence along with a recursion formula for the remaining terms is given below. Write out the first ten terms of the sequence.a1=6,an+1=an+(1/3^n)
The first term of the given sequence is 6, and the recursion formula for the remaining terms is 6, 6.333, 6.444, 6.481, 6.4938, 6.4988, 6.5007, 6.5018, 6.5024, 6.5026.
We are given a recursive formula: [tex]a_{n+1} = an + (1/3^n)[/tex] with [tex]a_{1} = 6.[/tex]
Using this formula, we can calculate the first few terms of the sequence as follows:
[tex]a_{1}= 6[/tex]
[tex]a_{2} = a_{1} + (1/3^1) = 6 + 1/3 = 6.333[/tex]
[tex]a_{3} = a_{2} + (1/3^2) = 6.333 + 1/9 = 6.444[/tex]
[tex]a_{4} = a_{3} + (1/3^3) = 6.444 + 1/27 = 6.481[/tex]
[tex]a_{5} = a_{4} + (1/3^4) = 6.481 + 1/81 = 6.4938[/tex]
[tex]a_{6} = a_{5} + (1/3^5) = 6.4938 + 1/243 = 6.4988[/tex]
[tex]a_{7} = a_{6} + (1/3^6) = 6.4988 + 1/729 = 6.5007[/tex]
[tex]a_{8} = a_{7} + (1/3^7) = 6.5007 + 1/2187 = 6.5018[/tex]
[tex]a_{9} = a_{8} + (1/3^8) = 6.5018 + 1/6561 = 6.5024[/tex]
[tex]a_{10} = a_{9} + (1/3^9) = 6.5024 + 1/19683 = 6.5026[/tex]
Therefore, the first 10 terms of the sequence are: 6, 6.333, 6.444, 6.481, 6.4938, 6.4988, 6.5007, 6.5018, 6.5024, 6.5026.
To practice more questions about 'recursion formula':
https://brainly.com/question/1275192
#SPJ11
a hummingbird lives in a nest that is 5 meters high in a tree. the hummingbird flies 9 meters to get from its nest to a flower on the ground. how far is the flower from the base of the tree? if necessary, round to the nearest tenth.
The flower is about 10.3 meters away from the base of the tree, rounded to the nearest tenth of a meter. The hummingbird has to fly this distance to get to the flower.
To figure out how far the flower is from the base of the tree, we need to use the Pythagorean theorem. It can be applied when there is a right triangle, which is a triangle with one angle of 90 degrees.Here, the hummingbird's nest is at the top of the tree, and the flower is on the ground. The vertical distance from the nest to the ground is 5 meters. The horizontal distance from the tree trunk to the flower is the distance we want to find.
We'll need to calculate the length of the hypotenuse (the slanted line) of the right triangle in order to determine the distance from the tree to the flower. The hypotenuse's length is found by squaring each of the other sides, adding the results together, and then taking the square root:
hypotenuse=√5^2+9^2
=√25+81 = √106
≈10.3 m
So the flower is about 10.3 meters away from the base of the tree, rounded to the nearest tenth of a meter. The hummingbird has to fly this distance to get to the flower.
To learn more about distance refer :
https://brainly.com/question/15129604
#SPJ11
5 2 fiths minus 1 2 fiths
Answer:
Step-by-step explanation:
2/5-1 2/5
The equation y = 1.55x + 110,419 approximates the total cost, in dollars, of raising a child in the united states from birth to 17 years, given the household’s annual income, x.
What is the approximate total cost of raising a child from birth to 17 years in a household with an annual income of 80,321
Answer:
he cost to raise a child from birth to 17 years in a household is $194119.
Step-by-step explanation:
Important information:
The equation y = 1.55x + 110,419
The annual incoem is $54,000
Calculation of the cost:
y = 1.55(54,000) + 110419
y = 83700 + 110419
y = $194119
Which two angles in the triangles below are complementary?
I NEED HELPPPPPPPP
Answer:
Step-by-step explanation:
Refer to attached diagram
∠CAD = 180 - (110 + 35) = 35° (angle sum triangle = 180°)
∠BCA = 180 -110 = 70° (straight angle = 180°)
∠BAC = 180 - (55 + 70) = 55° (angle sum triangle = 180°)
∠CAD + ∠BAC = 90° (complementary)
.......???????????????
Answer:
Step-by-step explanation:
[tex]x^2-5=-7x-1[/tex]
[tex]x^2+7x-5=-1[/tex] (subtracted 7x from both sides of the equation)
[tex]x^2+7x-4=0[/tex] (+1 both sides)
Use quadratic formula to solve for x:
[tex]x=\frac{-b \pm \sqrt{b^2 - 4ac} }{2a}[/tex] where [tex]a=1,b=7,c=-4[/tex]
[tex]=\frac{-7 \pm \sqrt{7^2 - 4\times1\times(-4)} }{2\times 1}[/tex]
[tex]=\frac{-7 \pm \sqrt{49 +16} }{2}[/tex]
[tex]=\frac{-7 \pm \sqrt{65} }{2}[/tex]
[tex]x=\frac{-7 +\sqrt{65} }{2},\frac{-7 - \sqrt{65} }{2}[/tex]
[tex]x=0.53,-7.53[/tex]
an inner city revitalization zone is a rectangle that is twice as long as it is wide. the width of the region is growing at a rate of 32 m per year at a time when the region is 220 m wide. how fast is the area changing at that point in time?
The area is changing at a rate of 28,160 m²/year at that point in time.
The area of the rectangular region is given by:
A = lw
Where l is the length of the rectangular region and w is the width of the rectangular region.
The width of the rectangular region is given to be 220 m. Therefore, we have the width w = 220 m. The length l of the rectangular region can be found knowing that it is twice as long as it is wide. Therefore, the length of the rectangular region is given by:
l = 2w
l = 2 x 220
l = 440
Therefore, the length l of the rectangular region is 440 m.
At the given point in time, the width of the rectangular region is growing at a rate of 32 m per year. Therefore, we have the rate of change of the width dw/dt to be 32 m per year. We need to find how fast the area of the rectangular region is changing at that point in time. Therefore, we need to find the rate of change of the area of the rectangular region dA/dt.
A = lw
dA/dt = w dl/dt + l dw/dt
dA/dt = 220 d/dt(2w) + 440 dw/dt
dA/dt = 220 x 2 dw/dt + 440 dw/dt
dA/dt = 880 dw/dt
Substitute the value of dw/dt to get:
dA/dt = 880 x 32
dA/dt = 28,160 m²/year
Therefore, the area of the rectangular region has a rate of change of 28,160 m² per year at that point in time.
Learn more about rate of change here: https://brainly.com/question/29504549
#SPJ11
if the length of a rectangle is decreased by 4 cm and the width is increased by 5 cm, the result will be a square. the area of this square will be 40cm^2 greater than the area of the rectangle. Find the area of the rectangle.
Answer: 30 cm^2.
Step-by-step explanation:
Let the original length of the rectangle be l and its width be w. Then, according to the problem:
(l - 4) = (w + 5) (equation 1)
Also, the area of the square is 40 cm^2 more than the area of the rectangle. Mathematically, we can represent this as:
(l - 4 + 5)^2 = lw + 40
Simplifying the left-hand side and substituting equation 1, we get:
l^2 - 2lw + w^2 = lw + 40
l^2 - 3lw + w^2 - 40 = 0
(l - 8)(l - 5) = 0
Therefore, l = 8 or l = 5. If we substitute l = 8 into equation 1, we get:
w = (l - 4) - 5 = -1
This is not a valid solution since the width cannot be negative. Therefore, the only valid solution is l = 5, which gives:
w = (l - 4) + 5 = 6
So the area of the rectangle is:
A = lw = 5 x 6 = 30 cm^2.
Answer:
steps explanations: x - 4 = y + 5 (sides of a square)
(x - 4)(y + 5) = 40
Which gives;
(y + 5) (y + 5) = 40
y² + 10y + 25 = 40
y² + 10y + 25 - 40 = 0
y² + 10y - 15 = 0
a=1 b=10 and c=-15
what is the vertex of h=-16t^2+29t+6 and its domain and range, and x and y axis?
evaluate the diagram below, and find the measures of the missing angles
Answer:
A=100
B= 80
C=80
D=100
E=80
F=80
G=100
Step-by-step explanation:
4. Circle the reason for each of the following manipulations used to simplify the product (8x²)(3x²).
(8.3).(x²-x²)
8x²-3x²
commutative or associative
8.3.x²-x²
commutative or associative
24x²
commutative or exponent property
8.3.x².x² = (8.3).(x².x²) - commutative and associative properties of multiplication.
What is commutative law?Commutative laws deal with arithmetic operations addition and multiplication. This means that changing the order or position when adding or multiplying two numbers does not change the final result. For example, 4 + 5 is 9 and 5 + 4 is also 9. The order in which the two numbers are added does not affect the sum. The same concept applies to multiplication. Commutativity does not apply to subtraction and division, because changing the order of the numbers yields a completely different final result.
(8x²)(3x²) can be simplified as follows:
(8x²)(3x²) = 8.3.x².x² = (8.3).(x².x²)
= [tex]24x^4[/tex]
The reason for each of the manipulations is as follows:
8.3.x².x² = (8.3).(x².x²) - commutative and associative properties of multiplication.
(8.3).(x².x²) = [tex]24x^4[/tex] - exponent property of multiplication.
Therefore, the final answer is [tex]24x^4[/tex].
To know more about associative properties visit:
https://brainly.com/question/30111262
#SPJ1
Solve each of the following systems by the Method of Elimination. These two should be relatively easy. Make sure to understand why. (a) x-y 7 (b) 2x+5y = 3 x+ y=5 -2x-y= 5
A) The solution of the system x-y = 7, x+y = 5 is (6, -1)
B) The solution of the system 2x+5y = 3, -2x-y= 5 is (-16/3, 13/3)
A) To solve by the elimination method , we add the left-hand sides and right-hand sides of the two equations separately, as follows,
(x - y) + (x + y) = 7 + 5
2x = 12
x = 6
(x + y) - (x - y) = 5 - 7
2y = -2
y = -1
Therefore, the solution to the system is (x, y) = (6, -1).
B) To solve by the method of elimination, we can multiply the first equation by 2 to eliminate the x term, as follows,
2x + 5y = 3
-4x - 2y = 10
Adding these two equations, we get,
3y = 13
y = 13/3
Substituting y = 13/3 into the first equation, we get,
2x + 5(13/3) = 3
2x = -32/3
x = -16/3
Therefore, the solution to the system is (x, y) = (-16/3, 13/3)
Learn more about elimination method here
brainly.com/question/14619835
#SPJ4
The given question is incomplete, the complete question is:
Solve each of the following systems by the Method of Elimination A) x-y = 7, x+y = 5 B) 2x+5y = 3, -2x-y= 5
there was a person trolling and didnt actually answer i need the answer to this
Answer:
Step-by-step explanation:
To write 0.246 as a fraction in simplest form, we need to remove the decimal and reduce the fraction to its lowest terms.
Step 1: Write 0.246 as the fraction 246/1000.
(Note: We get the denominator 1000 by counting the number of decimal places after the 6 in 0.246.)
Step 2: Simplify the fraction by dividing both the numerator and denominator by the greatest common factor.
The greatest common factor (GCF) of 246 and 1000 is 2.
246/2 = 123
1000/2 = 500
Therefore, 0.246 written as a fraction in simplest form is 123/500.
Answer:if I’m correct I think you would put it like this 123/500
It can’t be reduced because the denominator is at it’s simplest form
Step-by-step explanation:
use the newton-raphson method to find an approximate value of 3√7 . use the method until successive approximations obtained by calculator are identical. an appropriate function to use for the approximation would be f (x) = A x^2 + B x^3 + C x + D where A= B= C= D=
If c1 = 2, then c2 = ___
2√3= ____
A series of locks manages the water height along a water source used to produce energy. As the locks are opened and closed, the water height between two consecutive locks fluctuates.
The height of the water at point B located between two locks is observed. Water height measurements are made every 10 minutes beginning at 8:00 a.m.
It is determined that the height of the water at B can be modeled by the function f(x)=−11cos(πx/48 − 5π/12)+28 , where the height of water is measured in feet and x is measured in minutes.
What is the maximum and minimum water height at B, and when do these heights first occur?
The given function f(x) = -11cos(πx/48 - 5π/12) + 28 models the height of water at point B between two locks, where x is the time in minutes beginning at 8:00 a.m.
The amplitude of the cosine function is 11, and the vertical shift is 28. The argument of the cosine function has a period of 96 minutes, which means that the function repeats itself every 96 minutes.
Therefore, the maximum water height at B is 39 feet and occurs at x = 120 minutes (10:00 a.m.), while the minimum water height at B is 17 feet and occurs at x = 0 minutes (8:00 a.m.). These heights occur because the cosine function attains its maximum value at x = 120 minutes and its minimum value at x = 0 minutes.
For more questions like Function click the link below:
https://brainly.com/question/12431044
#SPJ11
Based on the following sorted 20 values for age, what are the possible split points?
{20, 22, 24, 26, 28, 31, 32, 33, 35, 40, 42, 43, 45, 47, 49, 50, 52, 53, 55, 57}
Multiple Choice
a {20, 21, 23, 25, 27, 29. 5, 31. 5, 32. 5, 34, 37. 5, 41, 42. 5, 44, 46, 48, 49. 5, 51, 52, 54, 56}
b {21, 23, 25, 27, 29. 5, 31. 5, 32. 5, 34, 37. 5, 41, 42. 5, 44, 46, 48, 49, 51, 52. 5, 54, 56, 57}
c {0, 21, 23, 25, 27, 29. 5, 31. 5, 32. 5, 34, 37. 5, 41, 42. 5, 44, 46, 48, 49, 51, 52. 5, 54, 56}
d {21, 23, 25, 27, 29. 5, 31. 5, 32. 5, 34, 37. 5, 41, 42. 5, 44, 46, 48, 49. 5, 51, 52. 5, 54, 56}
Based on the following sorted 20 values for age, the possible split points are {20, 21, 23, 25, 27, 29. 5, 31. 5, 32. 5, 34, 37. 5, 41, 42. 5, 44, 46, 48, 49. 5, 51, 52, 54, 56} (option a).
Option A suggests that the split points are {20, 21, 23, 25, 27, 29.5, 31.5, 32.5, 34, 37.5, 41, 42.5, 44, 46, 48, 49.5, 51, 52, 54, 56}. Notice that every split point falls between two consecutive ages in the original list. For example, the first split point is 20 because it is between 20 and 22. The second split point is 21 because it is between 20 and 22 as well.
Option B suggests that the split points are {21, 23, 25, 27, 29.5, 31.5, 32.5, 34, 37.5, 41, 42.5, 44, 46, 48, 49, 51, 52.5, 54, 56, 57}. Notice that the only difference between this option and Option A is that the last split point is 57 instead of 49.5.
Option C suggests that the split points are {0, 21, 23, 25, 27, 29.5, 31.5, 32.5, 34, 37.5, 41, 42.5, 44, 46, 48, 49, 51, 52.5, 54, 56}. Notice that the first split point is 0, which is not a possible age in the original list.
Option D suggests that the split points are {21, 23, 25, 27, 29.5, 31.5, 32.5, 34, 37.5, 41, 42.5, 44, 46, 48, 49.5, 51, 52.5, 54, 56}. Notice that the only difference between this option and Option A is that the split point after 49 is 49.5 instead of 49.5.
In summary, the correct answer is Option A because it provides all the possible split points that fall between the ages in the original list. When working with split points, it's important to consider the specific context and criteria for dividing the data.
To know more about split point here
https://brainly.com/question/12413130
#SPJ4
Bernard's rectangular bedroom is 12 feet by 16 feet. What is the diagonal distance from one corner to the opposite corner?
Answer: 20 feet
Step-by-step explanation: To find the diagonal distance from one corner to the opposite corner of Bernard's rectangular bedroom, we can use the Pythagorean theorem, which states that the square of the length of the hypotenuse (diagonal) of a right triangle is equal to the sum of the squares of the lengths of the other two sides.
In this case, the two other sides are the length and the width of the room, so we have:
diagonal^2 = 12^2 + 16^2
diagonal^2 = 144 + 256
diagonal^2 = 400
Taking the square root of both sides, we get:
diagonal = √400
diagonal = 20 feet
Therefore, the diagonal distance from one corner to the opposite corner of Bernard's rectangular bedroom is 20 feet.
1. The table shows the Total Expenses y (in dollars) of the College or University for year 2020-2021 and 2021-2022. Mine it's 21,211
a) Write a function that represents the Total Expenses y (in dollars) of that College or University you would like to attend after t years.
b) Use the function to estimate the Total Expenses your first year of school. *This year (t) is not the same for everyone since there are 8th graders to 11th graders in the class.
c) Sketch a graph (by hand) to model your function.
d) Identify the y-intercept and asymptotes of the graph. Find the domain and range of your function. Then describe the end behavior of the function.
Answer:
a) We can use the given data to find the rate of change (slope) of the expenses over one year, and then use it to write the equation of a line in slope-intercept form:
Slope m = (Total Expenses in 2021-2022 - Total Expenses in 2020-2021) / 1 year
m = (23,500 - 21,211) / 1 = 2,289
Using the point-slope form of a line, we can write the equation as:
y - 21,211 = 2,289(t - t1), where t1 is the year 2020-2021.
Simplifying, we get:
y = 2,289t + 18,922
b) To estimate the Total Expenses for your first year of school, you need to know what year you will start. Let's say you will start in 2024-2025, which is 3 years from 2021-2022.
Then, plugging in t = 3 into the equation we just found, we get:
y = 2,289(3) + 18,922 = 23,789
So the estimated Total Expenses for your first year of school would be $23,789.
c) The graph of the function y = 2,289t + 18,922 is a straight line with a positive slope of 2,289. It passes through the point (0, 18,922) on the y-axis, and it will extend indefinitely in both directions.
d) The y-intercept of the graph is the point (0, 18,922), which represents the Total Expenses for the year 2020-2021. There are no vertical asymptotes, but the graph will approach a horizontal asymptote as t goes to infinity, since the expenses cannot increase indefinitely. The domain of the function is all real numbers, and the range is all values greater than or equal to 18,922. As t increases, the function increases without bound, so the end behavior is that the graph goes up to the right.
Use Lagrange multipliers to find the points on the given cone that are closest to the following point.
z^2 = x^2 + y^2; (14, 8, 0)
x,y,z=(smaller z-value)
x,y,z=(larger z-value)
By using the Lagrange multipliers, the two points on the cone that is closest to (14, 8, 0) are:
(7, 4, √65) and (7, 4, -√65)
We want to minimize the distance between the point (14, 8, 0) and the points on the cone z^2 = x^2 + y^2. The distance squared between two points (x_1, y_1, z_1) and (x_2, y_2, z_2) is given by:
d^2 = (x2 - x1)^2 + (y2 - y1)^2 + (z2 - z1)^2
In our case, we want to minimize the distance squared between (14, 8, 0) and a point (x, y, z) on the cone z^2 = x^2 + y^2:
d^2 = (x - 14)^2 + (y - 8)^2 + z^2
Subject to the constraint z^2 = x^2 + y^2. We can use Lagrange multipliers to solve this constrained optimization problem. Let L be the Lagrangian:
L = (x - 14)^2 + (y - 8)^2 + z^2 - λ(z^2 - x^2 - y^2)
Taking the partial derivatives of L with respect to x, y, z, and λ, and setting them to zero, we get:
2(x - 14) - 2λx = 0.....(1)
2(y - 8) - 2λy = 0.....(2)
2z - 2λz = 0.....(3)
z^2 - x^2 - y^2 = 0.....(4)
Simplifying the third equation, we get z(1 - λ) = 0. Since we want to find points where z is not zero, we must have λ = 1. Then, from the first two equations, we get x = 7 and y = 4. Substituting these values into the fourth equation, we get:
z^2 = x^2 + y^2 = 65
So the two points on the cone that is closest to (14, 8, 0) by using Lagrange multipliers are:
(7, 4, √65) and (7, 4, -√65)
To know more about the "Lagrange multipliers": https://brainly.com/question/4609414
#SPJ11
in the figure below, mL2= 138, find mL1, mL3, and mL4
Answer:
Step-by-step explanation:
Find ∠1:
∠2 + ∠1 = 180 (angles on a straight line are supplementary)
138 + ∠1 = 180
∠1 = 42°
Find ∠4:
∠4 =∠2 = 138° (vertically opposite angles are equal)
Find ∠3:
∠3 = ∠1 = 42° (vertically opposite angles are equal)
Which value will be assigned to z in line 12 under static sexping? (b) Which value will be assigned to 2 in line 12 under dynamic scoping? I might be instructive to draw the runtime stack for different times of the execution. Inut it is not strictly required. Draw the runtime stack after each line executes! Exercise 3. Parameter Passing Consider the following block. Ansune static scaping { int y: int z; - 7 { int (int a) 4 yari: return (yta) 1 int g(int x) { y = f(x+1)+1; 2:- 1( x3): return (z+1) } 2 :- g(y2): : 12 13 14 is) What are the values of y and 2 at the end of the following block under the assumption that both parameters a und x repassed: la) Call-by-Name (h) Calltyy Need It might be instructive to draw the runtime stack for differcut times of the execution, but it is not strictly required Draw the runtime stack after each line executes
The runtime stack for dynamic scoping at the end of the block would be:
Under static scoping, the value of z in line 12 will be 7. Under dynamic scoping, the value of z in line 12 will be the value of y in line 2, which is equal to f(x+1)+1. The values of y and z in the end of the block will differ depending on the parameter passing method used.
For call-by-name, the value of y at the end of the block will be f(x+1)+1 and the value of z will be f(x+1)+1+1. For call-by-need, the value of y will be f(x+1)+1 and the value of z will be f(x+1)+1+1.
It might be instructive to draw the runtime stack for different times of the execution, but it is not strictly required. The runtime stack for static scoping at the end of the block would be:
The runtime stack for dynamic scoping at the end of the block would be:
Are the expressions -0.5(3x + 5) and
-1.5x + 2.5 equivalent? Explain why or why not.
These expression is not true .
What is a mathematical expression?
A mathematical expression is a sentence that consists of at least two numbers or variables, the expression itself, at least one arithmetic operation, and the expression itself. Any one of the following mathematical operations could be used: addition, subtraction, multiplication, or division.
For instance, the expression x + y is an expression with the addition operator placed between the terms x and y. Mathematicians utilize two different sorts of expressions: algebraic and numeric. Numeric expressions only contain numbers; algebraic expressions additionally incorporate variables.
-0.5(3x + 5) and -1.5x + 2.5 equivalent.
by distributing the 0.5 = -1.5x + 2.5
= -1.5x + 2.5
= 0.5(3*2 + 5 )
= - 1.5 * 2 + 2.5
= - 3 - 2.5 = -3 + 2.5
- 5. 5 = 0.5
this is not true. these expression is not true .
Learn more about expression
brainly.com/question/14083225
#SPJ1
Mr. Ferrell has feet of a piece of 5/6 cardboard. He wants to cut pieces that are foot long. 1/8 How many pieces can he make?
Mr. Ferrell can cut 6 and 2/3 pieces that are one-eighth foot long from a 5/6 foot long piece of cardboard.
What is common factor?A number is said to be a common factor if it can divide two or more integers without producing a residue. Common factors are used in fraction operations to simplify fractions and carry out operations like addition, subtraction, multiplication, and division.
Finding a common denominator is necessary, for instance, when adding or subtracting fractions. A multiple of all the fractions' denominators is referred to as a common denominator. We can determine the shared characteristics of the denominators and utilise the lowest common multiple (LCM) as the common denominator to obtain a common denominator.
Given that, one-eighth foot long pieces can be cut from a 5/6 foot long piece of cardboard.
First, we need to convert 5/6 feet into eighths of a foot:
5/6 feet = (5/6) * 8 eighths = 40/48 eighths
Next, we need to divide 40/48 by 1/8 to find the number of one-eighth foot long pieces that can be cut:
(40/48) ÷ (1/8) = (40/48) * (8/1) = 320/48 = 6 2/3 pieces
Hence, Mr. Ferrell can cut 6 and 2/3 pieces that are one-eighth foot long from a 5/6 foot long piece of cardboard.
Learn more about LCM here:
https://brainly.com/question/20739723
#SPJ1
There are 1200 students in a school if 780 of them are girls what is the percentage of boys in the school?
We divide the number of boys by the total number of students (1200) and multiply by 100. Percentage of boys = (420/1200) x 100% = 35%.
To find the percentage of boys in the school, we need to subtract the number of girls from the total number of students, then divide by the total number of students and multiply by 100 to get the percentage.
Number of boys = total number of students - number of girls
Number of boys = 1200 - 780
Number of boys = 420
Percentage of boys = (number of boys / total number of students) x 100
Percentage of boys = (420 / 1200) x 100
Percentage of boys = 35
Therefore, the percentage of boys in the school is 35%.
Learn more about percentage here: brainly.com/question/29306119
#SPJ4
a child who weighs 18kg is to receive motrin (ibuprofen) 8mg/kg by mouth every 4 hours as needed for pain. the label reads 100mg/5mls. how many milliliters will you administer?
According to the information on what the child should receive ibuprofen, it should be administered to the child 1.6 mL.
What is Ibuprofen?Ibuprofen is a nonsteroidal anti-inflammatory drug (NSAID). It works by inhibiting the body's synthesis of prostaglandins. This aids in the reduction of swelling, pain, and fever. It can also be used to relieve mild to moderate pain caused by menstruation, arthritis, or toothache.
To calculate the amount of milliliters to be administered, we need to use the following formula:
Amount of Motrin = Weight of child (kg) × Dose of Motrin (mg/kg) ÷ Concentration of Motrin (mg/ml)
Where
Weight of child = 18kgDose of Motrin = 8mg/kgConcentration of Motrin = 100mg/5mlsSubstitute the given values in the above formula.
Amount of Motrin = 18kg × 8mg/kg ÷ 100mg/5mls= 144mg ÷ 20mg/mls= 7.2mls
Therefore, the amount of Motrin to be administered is 7.2mls.
However, the dosage amount administered is not in 5ml increments. Therefore, we need to round it to one decimal place. Thus, we'll have: Amount of Motrin = 7.2 ml (rounded to one decimal place) = 1.6 ml Answer: 1.6 ml
See more about amount to be administered at: https://brainly.com/question/30479294
#SPJ11
Someone please help I need the answer to the 7 questions the image is below
a) The Name of the angle of elevation is ∠c = 83.3°
b) The Name of the Hypotenuse side is AC
c) The Name of the Opposite side is AB
What is the elevation angle?The angle formed between the line of sight and the horizontal is known as the angle of elevation. The angle created is an angle of elevation if the line of sight is upward from the horizontal line.
We can use the tangent ratio to determine the angle of elevation:
tan(angle of elevation) = opposite/adjacent
tan(angle of elevation) = 29.25/4.75
tan(angle of elevation) = 6.157
The inverse tangent (tan⁻¹) both sides, we obtain:
angle of elevation = tan⁻¹(6.157)
Using a calculator, we get:
angle of elevation ≈ 81.3 degrees (rounded to the nearest tenth)
The elevation angle is roughly 81.3 degrees.
d) The Name of the Adjacent side is BC
e) The Trig Ratio I will be using is Tan θ = Sin θ/Cos θ because we are
given the side Opposite Side & Adjacent Side
To know more about elevation angle visit:-
brainly.com/question/21137209
#SPJ1
the mean credit card debt for a u.s. household is $7,115 with o standard deviation of $2,160. this mean is such a large value because of a few deeply indebted households. if a random sample of 50 us households is selected, what is the approximate probability that the mean credit card debt for the sample exceeds $7,500?
The approximate probability that the mean credit card debt for a sample of 50 US households will exceed $7,500 is , based on a normal distribution with a mean of $7,115 and a standard deviation of $2,160.
What is the z-score formula?
The z-score formula is a statistical method used to calculate the standard deviation of a raw score or data point relative to the mean of the group of raw scores or data points. It is given as:
[tex]z = \frac{x - \mu}{\sigma}[/tex]
where z is the z-score, x is raw score, μ is the mean, and σ is the standard deviation.
The approximate probability can be calculated as follows:
First, find the standard error of the mean: [tex]SE = \frac{\sigma}{\sqrt{n}}[/tex]
[tex]SE = \frac{2,160}{\sqrt{50}}\\\\SE = 305.39[/tex]
Secondly, find the z-score: [tex]z = \frac{\overline{x} - \mu}{SE}[/tex]
[tex]z = \frac{7,500 - 7,115}{305.39}\\\\z = 1.263[/tex]
The probability that a z-score will be greater than 1.263 is 0.1038 from the standard normal table or calculator.
Therefore, the approximate probability is 0.1038 or 10.38%.
Learn more about Z-score formula here:
https://brainly.com/question/25638875
#SPJ11
Write a equation for a parabola with a focus at (-2,5) and a directrix at x=3 format: x=
Answer:Write a equation for a parabola with a focus at (-2,5) and a directrix at x=3 format: x=
Step-by-step explanation:
what percentage of defective lots does the purchaser reject? find it for . given that a lot is rejected, what is the conditional probability that it contained 4 defective components
The purchaser rejects 26.01% of the lots that contain five or more defective components, and the conditional probability of having four defective components given that the lot was rejected is 0.1653.
How do we calculate the probability?The percentage of defective lots that the purchaser rejects can be found by using the given formula. We can also calculate the conditional probability of having four defective components, given that the lot was rejected. Here's how to do it.
Let p be the probability that any component is defective. Then the probability that any component is non-defective is 1-p.
According to the given data, a lot is rejected if and only if there are at least five defective components in it. Let q be the probability that a lot is defective, i.e. the probability that there are five or more defective components in a lot.
Then, q = P(X ≥ 5), where X is the number of defective components in the lot. We can find the probability of rejecting a lot by subtracting the probability of accepting the lot from 1. So, we have:
P(reject) = 1 - P(accept)
P(accept) = P(X ≤ 4)
Now, we need to find q. We can do this by using the binomial distribution:
[tex]P(X = k) = C(n, k) * pk * (1-p)n-k[/tex]
where C(n, k) is the number of ways to choose k items out of n items. Here, n = 20 (the number of components in a lot). So,
[tex]q = P(X \geq 5) = 1 - P(X\leq 4) = 1 - [P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4)][/tex]
[tex]q = 1 - [C(20, 0) * p0 * (1-p)20-0 + C(20, 1) * p1 * (1-p)20-1 + C(20, 2) * p2 * (1-p)20-2 + C(20, 3) * p3 * (1-p)20-3 + C(20, 4) * p4 * (1-p)20-4][/tex]
[tex]q = 1 - [1 * p0.2 * (1-0.2)20-0 + 20 * p0.2 * (1-0.2)20-1 + 190 * p0.2 * (1-0.2)20-2 + 1140 * p0.2 * (1-0.2)20-3 + 4845 * p0.2 * (1-0.2)20-4][/tex]
[tex]q = 0.2601[/tex] (rounded to four decimal places)
So, the purchaser rejects 26.01% of the lots that contain five or more defective components.
Now, we need to find the conditional probability that a lot contained four defective components given that it was rejected. Let R be the event that a lot is rejected, and let F be the event that a lot contains four defective components.
Then, we have to find P(F | R), the conditional probability of F given R. We can use Bayes' theorem to find this:
P(F | R) = P(R | F) * P(F) / P(R)
where P(R | F) is the probability of rejecting a lot given that it contained four defective components, P(F) is the prior probability of a lot containing four defective components, and P(R) is the overall probability of rejecting a lot.
[tex]P(F) = C(20, 4) * p4 * (1-p)20-4 = 0.186[/tex]
[tex][tex]P(R) = P(X \geq 5) = q = 0.2601[/tex][/tex]
[tex]P(R | F) = P(X \geq 5 | X = 4) = P(X = 5) / P(X = 4) = C(20, 5) * p5 * (1-p)20-5 / C(20, 4) * p4 * (1-p)20-4[/tex]
[tex]P(R | F) = 0.2308[/tex]
So, we have:
[tex]P(F | R) = P(R | F) * P(F) / P(R)[/tex]
[tex]P(F | R) = 0.2308 * 0.186 / 0.2601[/tex]
[tex]P(F | R) = 0.1653[/tex] (rounded to four decimal places)
Therefore, the conditional probability of having four defective components given that the lot was rejected is 0.1653.
See more about conditional probability at: https://brainly.com/question/10739997
#SPJ11
There are two coins in a bin. When one of them is flipped it lands on heads with probability 0.6 and when the other is flipped, it lands on heads with probability 0.3. One of these coins is to be chosen at random and then flipped. a) What is the probability that the coin lands on heads? b) The coin lands on heads. What is the probability that the chosen coin was the one that lands on heads with probability 0.6?
When one of the coin is flipped it lands on heads with probability 0.6 and when the other is flipped, it lands on heads with probability 0.3, then the probability that the coin lands on heads is 0.45 and the coin lands on heads but the probability that the chosen coin was the one that lands on heads with probability 0.6 is 0.67.
a) The probability of getting heads, we can use the law of total probability.
There are two coins, and each has a probability of landing on heads. So we can calculate the probability of getting heads by weighting each coin's probability by its probability of being chosen.
Therefore,
P(heads) = P(heads from coin 1) * P(choose coin 1) + P(heads from coin 2) * P(choose coin 2)
Plugging in the values, we have:
P(heads) = 0.6 * 0.5 + 0.3 * 0.5 = 0.45
Therefore, the probability of getting heads is 0.45.
b) The probability that the chosen coin was the one that lands on heads with probability 0.6, given that the coin lands on heads, we need to use Bayes' theorem. Specifically, we have:
P(choose coin 1 | heads) = P(heads from coin 1 | choose coin 1) * P(choose coin 1) / P(heads)
Plugging in the values, we have:
P(choose coin 1 | heads) = 0.6 * 0.5 / 0.45 = 0.67
Therefore, the probability that the chosen coin was the one that lands on heads with probability 0.6, given that the coin lands on heads, is 0.67.
To practice more questions about probability:
https://brainly.com/question/25870256
#SPJ11