Answer:
D
Explanation:
Van der Waal forces are small dipole attractions between molecules caused by a temporary electron shift ,here, the option D is correct.
What are Van Der Waal forces?Van der Waals forces exist among all kinds of atoms and molecules. The origin of this force stems from the instantaneous dipole-induced dipole interactions among adjacent polar atoms and molecules.
Among polar molecules, there are three components that contribute to the total forces: the induction force, the orientation force and the dispersion force.
The Van Der Waal forces that act between macroscopic bodies and surfaces in a solvent medium are relevant to the phenomena of protein adsorption.
Van Der Waal forces are the small dipole attractions between molecules caused by a temporary electron shift , thus, option D is correct.
Learn more about Van Der Waal forces here:
https://brainly.com/question/14395915
#SPJ2
Which relationship is an example of commensalism?
A )A diamondback rattlesnake and a gopher turtle share a burrow. The turtle digs the hole, and the snake provides protection from predators for the turtle.
B)Remora fish stick to large sharks, receiving a free ride and scraps of food the shark does not eat. The shark is neither helped nor harmed.
C)Hyenas and lions fight over the same antelope kill.
D)A tapeworm lives in the intestine of a dog, obtaining food for itself, while slowly harming the dog.
Answer:
The correct answer is option
B) "Remora fish stick to large sharks, receiving a free ride and scraps of food the shark does not eat. The shark is neither helped nor harmed".
Explanation:
Commensalism is defined as a type of inter-species relationship at which one individual gets benefited and the other is neither benefited or harmed. An example of commensalism is the one between remora fish and large sharks. In this case, remora fish gets attached to the large sharks by an organ that acts suction cup. The remora fish gets benefited by receiving transportation, a food source and protection from predators, while the large sharks are neither helped nor harmed.
9A. A sample of hydrogen at 1.56 atm had it's pressure decreased to 0.73
atm producing a new volume of 751 mL. What was its original volume? *
Answer:
351.43mL
Explanation:
To calculate the original volume of hydrogen gas in this question, the Boyle's law equation will be used. Boyle's law equation is:
P1V1 = P2V2
Where; P1 = initial pressure
V1 = initial volume
P2 = final pressure
V2 = final volume
According to this question, the P1= 1.56atm, V1 = ?, P2 = 0.73atm, V2 = 751mL
Hence;
P1V1 = P2V2
1.56 × V1 = 0.73 × 751
1.56 V1 = 548.23
V1 = 548.23/1.56
V1 = 351.43mL
Therefore, the original volume of hydrogen gas is 351.43 mL.
I don't understand this :c
help me please
7 Which activity occurs in a plant cell but NOT in an animal cell? *
A Energy is released after food molecules are broken down.
B Materials are transported from one part of the cell to another part of the cell.
C Waste molecules are stored in vacuoles.
D Food is produced using light energy.
Answer:
don't know sorry
Explanation:
(-_-)
Which event is part of a convection current in the air?
A. Cool air sinks.
B. Cool air rises.
C. Warm air swirls.
D. Warm air sinks
Answer:
The answer is (Cool air sinks)
Explanation:
hope I help
The Cool air sinks are the part of a convection current in the air. Therefore, option A is correct.
What is convection current ?Convection currents are a type of natural heat transfer that involves the transfer of energy and heat from one location to another. We can use the sensation of heat when placing our hands over a campfire as an example of this. Convection currents are to blame for this.
Convection is a method of heat transfer in which gases or liquids are moved between areas of varying temperatures. Natural or free convection is the term used to describe convection that occurs naturally.
Convection currents move heat from one place to another by using the mass motion of a fluid, such as water, air, or molten rock. Convection currents' ability to transfer heat is what drives ocean currents, atmospheric weather, and geology.
Thus, option A is correct.
To learn more about convection current, follow the link;
https://brainly.com/question/9739063
#SPJ5
348 g of water starting at 4.0°Celsius is heated until his temperature is 37°Celsius. Calculate the amount of heat energy needed to cause this rise in temperature
STEP BY STEP EXPLANATION!!
Answer:
48.049 kJ or 48049 J
Explanation:
Hello again.
So we know the formula [tex]q = mc\Delta t[/tex]. c is the heat capacity but this time, it is not given. However, water has a very well known heat capacity which is 4.184 J/(g°C). This is in fact the number we refer to a calorie which is the amount of energy you burn that can raise the temperature of 1g of water by 1°C. So, plugging in values, you get the above. But double check if I am wrong.
The amount of heat energy needed to cause this rise in temperature is 48.049 kJ or 48049 J.
What is heat energy?Heat is the energy that moves from one body to another when temperatures are different. Heat passes from the hotter to the colder body when two bodies with different temperatures are brought together.
A given amount of matter's heat capacity is the amount of energy needed to raise its temperature by one degree Celsius.
The heat energy will be calculated by the formula
Q = m•C•ΔT
Where c is the heat capacity.
The m is the mass
T is the time
Mass is 348 grams
Temperature is 37°C
The change in temperature is 4.0°C to 37°C
The heat capacity of water is 4.184
Q = 348 x 4.184 x -33 = 48049.056.
Therefore, the amount of heat energy needed is 48.049 kJ or 48049 J.
Learn more about heat energy, here:
https://brainly.com/question/10162784
#SPJ2
An atom with the electron configuration 2-8-8-2 has an incomplete
Answer:
3rd principal energy level
Explanation:
Principle energy that explains the energy of the electrons and positions of electrons of a particular atom. There are four energy levels fist to fourth that are made of sublevels and that is made up of s, p, d and f orbitals.
First principal energy level - 2
Second principal energy level - 8
Third principal energy level - 18
Fourth principal energy level - 32
3rd energy level has 9 orbitals, which has 18 electrons
2 in the s orbital,
6 in the three p orbitals, and
10 in the five d orbitals.
So, here there are only 8 electrons in the third principal energy level.
What is the main cause of any change of state?
Answer:
During a change in state, the motion of the particles changes. ... Particles in a liquid can side past each other, but particles in a solid can only move enough to vibrate. Removing energy from a liquid can cause it to change to a solid. Adding energy to a solid can cause it to change to a liquid.
Hope this helps! please give me brainliest!
God bless:)
Change of state is caused by supply of heat to a substance causing its molecules to move faster.
There are three states of matter, these are;
SolidLiquid GasIt is possible for a substance to be transformed from one state of matter to the other when heat energy is supplied to the substance.
This heat energy causes the kinetic energy of the molecules of the substance to increase hence they vibrate faster and change from one physical state to another.
Learn more: https://brainly.com/question/9402776
What is the mass of 0.250 mol of chlorotrifluoromethane, CCIF3?
A. 26.1 g
B. 104 g
C. 4.78 x 10-3 g
D. 52.2g
Answer:
26.1g
Explanation:
Cclf3
=35.5
F=54/101.5
Mass=mol*mm
=0.25*1015
=26.1g
Pls help I need it ASAP!!!
Answer:
B
Explanation:
because water has the always has the same volume but it can change shape of the glass or container that it is put in
A car travels 45 miles per hour. What is this speed in feet per hour?
Answer:
64
hopeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
The half-life of lead-212 is 11h. How much of a 100-g sample of lead-212 is left after 33h?
Someone please help
how to determine the atomic mass?
Answer: To calculate the atomic mass add up the mass of protons and neutrons.
I hope I helped!
how are sol, solution and suspension different from each other?
plzzzzzz answer asap
Answer:
a
Explanation:
The graph above compares three states of a substance.
Which of the following choices would NOT be an appropriate label for the y-axis?
A. motion of particles.
B. density of particles.
C. randomness of particles.
D. kinetic energy of particles.
Answer: is C
Explanation:
Coffee is an example of a
a
homogeneous mixture
b
heterogeneous mixture
c
suspension
d
colloid
Answer:
A
Explanation:
Which of the following is NOT
matter
Air , steam, heat , cow
Answer:
air
Explanation:
Answer:
Heat
Explanation:
Heat is a transfer of energy, but it is not made of matter. If you were talking about fire, fire is matter. But the heat from it isn't.
Help it’s for a test!!!!!!!!!!!How many moles are in 2.16 x 1023 atoms of magnesium?
A. 35.9 moles
B. .359 moles
C. 7.18 moles
D. 0.359 moles
E. 0.90 moles
A sample of aluminum has mass 26.98 g and has a density of
2.70 g/cm3. Calculate volume to the correct number of significant
figures.
Answer:
9.99L
Explanation:
you can see the answer at the pic
Answer:
The volume of aluminum is 9.99 cm³.
Explanation:
Given data:
Mass of aluminum = 26.98 g
Density of aluminum = 2.70 g/cm³
Volume of aluminum = ?
Solution:
Formula:
d = m/v
now we will put the values in formula.
2.70 g/cm³ = 26.98 g / v
v = 26.98 g / 2.70 g/cm³
v = 9.99 cm³
Thus, the volume of aluminum is 9.99 cm³.
PLS ANSWER!! ASAP!! 10 POINTS!!
Which of the following properties of gold does not explain why this metal is often used in jewelry?
A. Gold is a good conductor of electricity.
B. Gold is shiny.
C. Gold is very malleable.
D. Gold is a solid.
Answer: A is the correct answer
Explanation: It conducts more electricity than almost all other metals ans gems in jewelry
Synthesis
1 point
Balance the following chemical equation. What are the final coefficients
starting from the left and going to the right? *
AICI:
+
H2O
_Al(OH)3 +
НСІ
1,1,1,1
1, 2, 1, 2
2, 2, 2, 2.
1,3,1,3
Answer:
nãosecoi m fazoe isrspoo rqe a perugtunat iomkplnetacá
Explanationveja qeuastã onvamoetn e depois recoepe-a qui aipis onãestoácpletoma :
what makes a substance a molecule? it’s 7th grade science
Answer:
Molecular substances are made when two or more atoms join together by covalent bonds.
Explanation:
I hope this helps. I took the same class.
Which of the following compounds below would possess it trigonal planar molecule or geometry?
PHOTO ABOVE
HELP ME IN MY TEST
Answer:
B - BF3
Explanation:
BF3 has 3 bonds around the central atom and now lone pairs on it. This matches the geometry of a trigonal planar molecule as per the VSEPR Model.
Molecules have two distinct characteristics: form and geometry. Geometry includes the lone pair encircling the focal element whereas shape excludes it. Therefore, the correct option is option B.
What is VSEPR theory?Valence shell electron repulsive force is what VSEPR stands for. Based on the valence electron pairs that are prevalent around the core element of the molecule, the VSEPR theory is employed to predict the structure and geometry of molecules.
According to VSEPR theory, Lone pair lone pair repulsion is greater than bond pair bond pair repulsion. The core atom of BF[tex]_3[/tex] is surrounded by three bonds and contains no lone pairs. According to the VSEPR Model, this corresponds to the geometry of such a trigonal planar molecule.
Therefore, the correct option is option B.
To know more about VSEPR theory, here:
https://brainly.com/question/19582124
#SPJ6
IUPAC name for BaSO3
Answer:
Barium Sulfite
Explanation:
Barium Sulfite
The IUPAC name for BaSO₃ is barium sulfite.
"Ba" stands for barium, which is the chemical symbol for the element with atomic number 56. Barium is an alkaline earth metal and belongs to Group 2 of the periodic table.
"SO₃" stands for sulfite, which is a polyatomic ion composed of one sulfur atom (S) and three oxygen atoms (O). The chemical formula for the sulfite ion is SO₃²⁻. The sulfur atom in the sulfite ion has a +4 oxidation state.
When barium (Ba) reacts with the sulfite ion (SO₃²⁻), they combine to form barium sulfite (BaSO₃). The balanced chemical equation for the reaction is:
Ba²⁺ + SO₃²⁻ → BaSO₃
Barium sulfite is an ionic compound, where the Ba²⁺ ion and the SO₃²⁻ ion are held together by electrostatic attractions (ionic bonds). In its solid form, barium sulfite appears as a white crystalline powder.
Learn more about IUPAC name from the link given below.
https://brainly.com/question/33646537
#SPJ6
What would be the phenotypes of the offspring?
Name this element.
i need the answer like now
2. What types of organisms have cells with very large vacuoles?
Animals
Plants
Ο Ο Ο Ο.
Bacteria
Fungi
CLEAR ALL
which one only has one type of
atom In it.
Element , compound
Answer:
element
Explanation:
I need help in chemistry!!!!!!!!!!!
Answer:
ok whats the question dude just ask :PPPPPPPPPPPPPPPPPPPPPP
OTHERWISE EOEOEEOEOEOOEOEOEOEOEOOEOWOWOWOWOW
wow is mom upide down
Explanation:
Identify the reactants and products, and describe the change in energy that occurs as bonds are broken and formed.
Answer:
Chemical reactions almost always have a change in energy between products and reactants. The total energy of a system must remain the same and sometimes a chemical reaction will absorb or release energy as light, heat or both. The energy change in a chemical reaction is caused by the amount of stored energy between the products and the reactants.
Explanation: