Please help solve. Image down below

The material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature.

Latent heat is defined as the thermal energy absorbed or released during a phase change of a substance.

Latent heat can also be explained as the energy in hidden form which is supplied or extracted to change the state of a substance without changing its temperature.

From the above explanation, we can conclude that, the material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature.

Learn more about latent heat here: https://brainly.com/question/87248

The si unit of force is newton.

so, F is eqal to m*g

Answer:

F=ma

Explanation:

force is actually a derived quantity

newton is a unit derived from kg.m/s^2

This is from Newton's second law of motion

F=ma

Answer:

M1 would seem to be slower because of a larger mass

x1 = A1 sin ω1 t1        describes the displacement

ω1 / ω2 = ((k1 / k2) / (m1 / m2))^1/2 = (m2 / m1)^1/2  since k's are equal

ω1 / ω2 = 1/2 from graph    (frequency of 2 is greater)

(m1 / m2)^1/2 = ω2 / ω1    from above

m1 / m2 = 2^2 = 4    so m1 would have 4 times the mass of m2

M1 would seem to be slower because of a larger mass

x1 = A1 sin ω1 t1      

ω1 / ω2 = ((k1 / k2) / (m1 / m2))^1/2 = (m2 / m1)^1/2  since k's are equal

ω1 / ω2 = 1/2 from graph   (frequency of 2 is greater)

(m1 / m2)^1/2 = ω2 / ω1   from above

m1 / m2 = 2^2 = 4    so m1 would have 4 times the mass of m2.

The two graphs shown represent the motion of two blocks with different masses, m1 and m2. The blocks are oscillating on identical springs. For the system consisting of the two blocks, the change in the kinetic energy of the system is equal to work done by gravity on the system. For the system consisting of the two blocks, the pulley and the Earth, the change in the total mechanical energy of the system is zero.

The two graphs shown represent the motion of two blocks with different masses, m1 and m2. The blocks are oscillating on identical springs. For the system consisting of the two blocks, the change in the kinetic energy of the system is equal to work done by gravity on the system.

Therefore, M1 would seem to be slower because of a larger mass

x1 = A1 sin ω1 t1      

ω1 / ω2 = ((k1 / k2) / (m1 / m2))^1/2 = (m2 / m1)^1/2  since k's are equal

ω1 / ω2 = 1/2 from graph   (frequency of 2 is greater)

(m1 / m2)^1/2 = ω2 / ω1   from above

m1 / m2 = 2^2 = 4    so m1 would have 4 times the mass of m2.

Learn more about graph on:

https://brainly.com/question/17267403

#SPJ2

Answer:

Isaac Newton came up with the 3 Laws of Motion

Answer:

Isaac Newton came up with three laws of motion

The angular momentum is 200 kg m^2 s^-1

Angular momentum is the product of  linear momentum and the perpendicular distance. Linear momentum is the product of mass and velocity, where radius is the perpendicular distance

Angular momentum = mass * velocity * radius

Angular momentum = 5 * 2 * 20

Angular momentum = 200 kg m^2 s^-1

read more about angular momentum here: https://brainly.com/question/4126751

Explanation:

formula is ˠ=vf

f=1/T

1/7

f=0.14

wavelength=27Ⅹ0.14

=3.78m

OR

7Ⅹ27

=189m

Answer:

C

because urine is waste product

All of the following are examples of physical properties except tearing.

This is used to describe the state of a physical system and is usually measurable.

Examples include:

Tearing isn't an example of a physical property which was why option A was chosen as the most appropriate choice.

Read more about Physical property here https://brainly.com/question/17436856

Question :-

Answer :-

Explanation :-

As per the provided information in the given question, The Resistance is given as 330 Ohm . The Voltage is given as 5 Volt . And, we have been asked to calculate the Current .

For calculating the Current , we will use the Formula :-

[tex] \bigstar \: \: \: \boxed{ \sf{ \: Current \: = \: \dfrac{Voltage}{Resistance} \: }} [/tex]

Therefore , by Substituting the given values in the above Formula :-

[tex] \dag \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]

[tex] \longmapsto \: \: \: \sf {Current \: = \: \dfrac {5}{330} } [/tex]

[tex] \longmapsto \: \: \: \sf {Current \: = \: \dfrac {1}{66} } [/tex]

[tex] \longmapsto \: \: \: \textbf {\textsf {Current \: = \: 66 }} [/tex]

Hence :-

[tex] \underline {\rule {180pt} {4pt}} [/tex]

Additional Information :-

[tex] \Longrightarrow \: \: \: \sf {Voltage \: = \: Current \: \times \: Resistance} [/tex]

[tex] \Longrightarrow \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]

[tex] \Longrightarrow \: \: \: \sf {Resistance \: = \: \dfrac {Voltage}{Current} } [/tex]

Alpha

I hope this helps you

:)

Voltage = 5 volts

[tex]\sf \dfrac{number \ of \ turns \ in \ primary \ coil}{voltage\ in \ primary \ coil} = \dfrac{number \ of \ turns \ in \ secondary\ coil}{voltage\ in \ secondary\ coil}[/tex]

[tex]\hookrightarrow \sf \dfrac{400}{100} = \dfrac{20}{V_2}[/tex]

[tex]\hookrightarrow \sf 400V_2}{} = 20*100[/tex]

[tex]\hookrightarrow \sf V_2 = 5 V[/tex]

If a jogger runs a 10 kilometer race in 60 minutes, her average speed is 10km/hr. Details about average speed can be found below.

Average speed can be calculated by dividing the distance moved by a body by the time taken. That is;

Average speed = Distance/Time

According to this question, a jogger runs a 10 kilometer race in 60 minutes. The average speed is calculated as follows:

Average speed = 10km/1hr

Average speed = 10km/hr.

Therefore, if a jogger runs a 10 kilometer race in 60 minutes, her average speed is 10km/hr.

Learn more about average speed at: https://brainly.com/question/12322912

Answer:

a

Explanation:

Distance is simply the distance travelled which in this case would be 4km + 3km = 7km

To work out displacement, try to imagine the situation.

Draw a straight line to the east (label it 3) and then draw another line from the end of the first line upwards (label this one 4). Thus, you've created a right angles triangle. Now use pythagorean theorem to work out the displacement

4^2 + 3^2 = 25

sqrt 25 = 5 = displacement

Answer:

p = rho× g × h

Explanation:

p: pressure

rho : density

g : gravity acceleration

h : height

Answer:

Explanation:

I don't think so. Think about it. To compress the volume by a factor of 2 it takes 956 Joules.

Now you come along and you want to get the pressure for 1/12 of the volume. It's going to take a huge pressure to do that.

I would suggest that you have to use a modified form of the formula.

PV = 956

You need to compress the volume by 1/6

P(V/6) = 956

6 * PV/6 = 6 * 956

PV = 5736 J

Why did I only take 1/6? Because. 956 represents the pressure needed for 1/2 the volume. You need to multiply 1/2 * 1/6 to get 1/12

The monocular cue of relative size

The balloon will attach to the wall because the balloon's negative charges will drive the electrons in the wall to shift to the other side of their atoms, leaving the wall's surface positively charged.

Answer:

If an object is electrically neutral it has no net charge becuase it has the same number of protons as it does electrons, which are opposite charges that offset each other. No, that just means that the sum of all its positive and negative amounts of charge equals zero.

Explanation:

The momentum, in the x-direction, that was transferred to the more massive cart after the collision is 19.38 kgm/s.

The momentum transfered to the more massive cart is determined by applying the principle of conservation of linear momentum as shown below;

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

where;

⁻ΔP₁ = ΔP₂

ΔP₂ = m₂v₂ - m₂u₂

ΔP₂ = m₂(v₂ - u₂)

ΔP₂ = 3m₁(v₂ - u₂)

ΔP₂ = 3 x 3.8 x (1.7 - 0)

ΔP₂ = 19.38 kgm/s

Thus, the momentum, in the x-direction, that was transferred to the more massive cart after the collision is 19.38 kgm/s.

The complete question is beblow

A cart of mass 3.8 kg is traveling to the right (which we will take to be the positive x-direction for this problem) at a speed of 6.9 m/s. It collides with a stationary cart that is three times as massive. After the collision, the more massive cart is moving at a speed of 1.7 m/s, to the right.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

Answer:

Step by step explanation:

Answer:

Explanation:

A television set is plugged into a 120 V outlet. The television circuit carries a current equal to 0.75 A. What is the overall resistance of the television set?​

V = IR

120 volt = 0.75A * R

R = 160 Ω

Answer:

M1 g L1 = 19 kg * 9.8 m/s^2 * 5 m = counter clockwise torque - Cassie at left end

M1 g L1 = M2 g L2        for torques to balance

L2 = M1 L1 / M2 = 19 * 5 / 31 = 3.06 M

Alex should sit at 3.1 m from the fulcrum (at 5 m from each end)

Answer:

50 N

Explanation:

Let the natural length of the spring = L

so

100 = k(40 - L)       (1)

200 = k(60 - L)       (2)

(2)/(1):   2 = (60 - L)/(40 - L)

60 - L = 2(40 - L)

60 - L = 80 - 2L

2L - L = 80 - 60

L = 20

Sub it into (1):

100 = k(40 - 20) = 20k

k = 100/20 = 5 N/in

Now

X = k(30 - L) = 5(30 - 20) = 50 N

Answer:

For B it is 0

Explanation:

I think

B. kilogram

I hope this helps you

:)

Answer:

B. kilogram

Explanation:

When stated in the unit J s, which is equal to kg m2 s1, the kilogram (kg) is defined by considering the fixed numerical value of the Planck constant h to be 6.62607015 1034 when expressed in the unit J s, which is equivalent to kg m2 s1. The United States Prototype Kilogram 20, a platinum-iridium cylinder held at NIST, is the country's principal mass standard. The kilogram was initially known as the Kilogram of the Archives, and it was defined as the mass of one cubic decimeter of water at its greatest density temperature. It was superseded by the International Prototype Kilogram following the International Metric Convention in 1875, which became the unit of mass without reference to the mass of a cubic decimeter of water or the Archives Kilogram. National Prototype Meters and Kilograms were allocated to each country that signed the International Metric Convention. Learn more about the kilogram's history and current definition. The kilogram (kg) is the only SI basic unit whose name and symbol incorporate a prefix for historical reasons. The SI prefix for 1000 or 103 is "kilo." Prefix names and symbols are attached to the unit name "gram," and prefix symbols are attached to the unit symbol "g," to create names and symbols for decimal multiples and submultiples of the unit of mass. Find out more about this historical oddity.

Units of Mass

10 milligrams (mg) = 1 centigrams (cg)

10 centigrams = 1 decigrams (dg) = 100 milligrams

10 decigrams = 1 gram (g)

10 decigrams = 1000 milligrams

10 grams = 1 dekagrams (dag)

10 dekagrams = 1 hectogram (hg)

10 dekagrams = 100 grams

10 hectograms = 1 kilogram (kg)

10 hectograms = 1000 grams

1000 kilograms = 1 megagram (Mg) or 1 metric ton (t)

A body's mass is a measurement of its inertial property, or the amount of stuff it contains. The force imposed on a body by gravity or the force required to maintain it is measured by its weight. On Earth, gravity accelerates a body downward at around 9.8 m/s2. In the context of weights and measurements, weight is frequently used as a synonym for mass. The verb "to weigh," for example, meaning "to ascertain the mass of" or "to have a mass of." Weight should be phased out in favor of mass, and the term mass should be used when mass is indicated. The kilogram is the SI unit of mass (kg). The weight of a body in a given reference frame is defined in science and technology as the force that causes the body to accelerate at the same rate as the local acceleration of free fall in that reference frame. As a result, the newton is the SI unit for the amount weight defined in this way (force) (N).

The type of heat transfer occurs in your stomach when you eat hot soup and an ice cold beverage is Conduction.

This is the process by which heat energy is transmitted through collisions between neighboring atoms or molecules.

This happens when they are in close contact with each other which was why Conduction was chosen as the most appropriate choice.

Read more about Conduction here https://brainly.com/question/893656