Please help, I need to know which are the correct ones to tick!

If e is an algebraic extension of a field f and r is a ring with [tex]f\subseteq r\subseteq e$,[/tex] then r must be a field.

we have [tex]a^{-1} = -\frac{1}{c_0}(a^{n-1} + c_{n-1}a^{n-2} + \cdots + c_1)$,[/tex] and all of the terms on the right-hand side of this equation belong to $r$.

Therefore, [tex]$a^{-1}\in r$[/tex], and we have shown that r is a field.

Since e is an algebraic extension of f, every element [tex]$x\in e$[/tex] satisfies some non-zero polynomial with coefficients in [tex]$f$[/tex], say [tex]$f(x)=0$[/tex]  for some non-zero polynomial[tex]$f(t) \in f[t]$.[/tex]

Now, suppose [tex]$r$[/tex] is a subring of  [tex]$e$[/tex] containing f.

To show that r is a field, it suffices to show that every non-zero element of r has a multiplicative inverse in r.

Let [tex]$a\in r$[/tex] be a non-zero element.

Since [tex]$a\in e$[/tex] , there exists a non-zero polynomial [tex]$f(t)\in f[t]$[/tex]  such that [tex]f(a)=0$.[/tex]

Let n be the degree of f(t), so that [tex]f(t) = t^n + c_{n-1}t^{n-1} + \cdots + c_1 t + c_0$ for some $c_i\in f$, $0\leq i\leq n-1$.[/tex]

Then, we have [tex]a^{-1} = -\frac{1}{c_0}(a^{n-1} + c_{n-1}a^{n-2} + \cdots + c_1)$,[/tex] and all of the terms on the right-hand side of this equation belong to r.  

Therefore, [tex]$a^{-1}\in r$[/tex], and we have shown that r is a field.

For similar question on algebraic extension.

https://brainly.com/question/30323989

#SPJ11

The given system of equations is a set of differential equations, where the variables x and y are functions of time t. The equations can be interpreted as describing the rate of change of x and y with respect to time, based on their current values.

To solve this system of equations, we can use techniques such as separation of variables or substitution. However, finding an analytical solution may not be possible in all cases. The condition (x,y)>0 means that both x and y are positive, which restricts the possible solutions of the system.  In general, the behavior of the system depends on the initial conditions, i.e., the values of x and y at a given time t=0. Depending on the initial values, the system may have equilibrium points, periodic solutions, or chaotic behavior. Finding the exact behavior of the system requires numerical methods or graphical analysis. For example, we can use software tools such as MATLAB or Wolfram Mathematica to plot the trajectories of the system and study their properties.

Learn more about trajectories here:

https://brainly.com/question/28164318

#SPJ11

The matrix b can be expressed as:

b = (-3 + sqrt(9 + 16a)) / 2 * I + (-3 - sqrt(9 + 16a)) / 2 * (1/3) * (3b)

To solve for matrix b, we can use algebraic manipulation. Starting with the given equation:

b^2 3b = 4a

We can rearrange the terms to isolate b on one side:

b^2 3b - 4a = 0

Now we have a quadratic equation in b. We can solve for b by using the quadratic formula:

b = (-3 ± sqrt(3^2 - 4(1)(-4a))) / (2(1))

b = (-3 ± sqrt(9 + 16a)) / 2

We end up with two possible values of b:

b = (-3 + sqrt(9 + 16a)) / 2

b = (-3 - sqrt(9 + 16a)) / 2

Therefore, the matrix b can be expressed as:

b = (-3 + sqrt(9 + 16a)) / 2 * I + (-3 - sqrt(9 + 16a)) / 2 * (1/3) * (3b)

where I is the identity matrix and 3b is the matrix on the right-hand side of the original equation.

To know more about matrix refer here:

https://brainly.com/question/29132693

#SPJ11

Answer:

The two ratios are not equivalent

Step-by-step explanation:

If two ratios a/b and a/c are the same and we cross multiply, the left side should equal the right side

In other words if a/b = c/d

a x d = b x c

So if 6/7 = 24/27,

6 x 27 = 7 x 24

6 x 27 = 162

7 x 24 = 168

Since 162 ≠ 168 the two ratios are not equal

The value of the line integral ∫C F⋅dr = 1.193.

To evaluate the line integral ∫C F⋅dr, we first need to calculate F⋅dr, where F= 〈−4sinx, 4cosy, 10xz〉 and dr is the differential of the vector function r(t)= (2t^3,-3t^2,3t) for 0 ≤ t ≤ 1.

We have dr= 〈6t^2,-6t,3〉dt.

Thus, F⋅dr= 〈−4sinx, 4cosy, 10xz〉⋅ 〈6t^2,-6t,3〉dt

= (-24t^2sin(2t^3))dt + (-24t^3cos(3t))dt + (30t^3x)dt

Now we integrate this expression over the limits 0 to 1 to get the value of the line integral:

∫C F⋅dr = ∫0^1 (-24t^2sin(2t^3))dt + ∫0^1 (-24t^3cos(3t))dt + ∫0^1 (30t^3x)dt

The first two integrals can be evaluated using substitution, while the third integral can be directly integrated.

After performing the integration, we get:

∫C F⋅dr = 2/3 - 1/9 + 3/5 = 1.193

Therefore, the value of the line integral ∫C F⋅dr is 1.193.

In conclusion, we evaluated the line integral by calculating the dot product of the vector function F and the differential of the given path r(t), and then integrating the resulting expression over the given limits.

To know more about line integral refer here :

https://brainly.com/question/30763905#

#SPJ11

The probability that Aaron goes to the gym on exactly one of the two days (Saturday or Sunday) is 0.74.

To calculate the probability, we can consider the two possible scenarios: (1) Aaron goes to the gym on Saturday and doesn't go on Sunday, and (2) Aaron doesn't go to the gym on Saturday but goes on Sunday.

In scenario (1), the probability that Aaron goes to the gym on Saturday is given as 0.8. The probability that he doesn't go on Sunday, given that he went on Saturday, is 1 - 0.3 = 0.7. Therefore, the probability of scenario (1) is 0.8 * 0.7 = 0.56.

In scenario (2), the probability that Aaron doesn't go to the gym on Saturday is 1 - 0.8 = 0.2. The probability that he goes on Sunday, given that he didn't go on Saturday, is 0.9. Therefore, the probability of scenario (2) is 0.2 * 0.9 = 0.18.

To find the overall probability, we sum the probabilities of the two scenarios: 0.56 + 0.18 = 0.74. Therefore, the probability that Aaron goes to the gym on exactly one of the two days is 0.74.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

Therefore, the solution of the given IVP using Laplace transform is: y(t) = -e^(3t) + t e^(3t) + (t^2/2) e^(3t) u(t-3)

Taking the Laplace transform of both sides of the differential equation, we have:

L[y''(t)] - 6L[y'(t)] + 9L[y(t)] = L[e^(3t)u(t-3)]

Using the derivative property of the Laplace transform, we have:

s^2 Y(s) - s y(0) - y'(0) - 6[s Y(s) - y(0)] + 9Y(s) = e^(3t) / (s - 3)

Substituting y(0) = 0 and y'(0) = 0, we get:

s^2 Y(s) - 6s Y(s) + 9Y(s) = e^(3t) / (s - 3)

Simplifying, we get:

Y(s) = [e^(3t) / (s - 3)] / (s - 3)^2

Using partial fraction decomposition, we can write:

Y(s) = -1/(s-3) + 1/(s-3)^2 + 1/(s-3)^3

Taking the inverse Laplace transform of both sides, we get:

y(t) = -e^(3t) + t e^(3t) + (t^2/2) e^(3t) u(t-3)

To know more about Laplace transform,

https://brainly.com/question/31481915

#SPJ11

The probability density function of Y is f_Y(y) = 1, for y ∈ (0, 1).

Given that X has an exponential distribution with λ=1.

Let X be a random variable with an exponential distribution characterized by parameter λ=1. This implies that the probability density function of X is given by:

f_X(x) = λ * e^(-λx) = e^(-x), for x ≥ 0.

Now, we are asked to find the probability density function of Y, where Y = e^(-X). To do this, we'll use the transformation technique. First, we find the inverse transformation X = g(Y) by solving for X:

X = -ln(Y)

Next, we compute the derivative of g(Y) with respect to Y:

dg(Y)/dY = -1/Y

Now, we can use the transformation technique formula to find the pdf of Y:

f_Y(y) = f_X(g(y)) * |dg(y)/dy| = e^(-(-ln(y))) * |-1/y|

Simplifying this expression, we get:

f_Y(y) = y * (1/y) = 1, for y in the range (0, 1).

So, the probability density function of Y is f_Y(y) = 1, for y ∈ (0, 1).

To know more about probability density function, refer to the link below:

https://brainly.com/question/31040390#

#SPJ11

a) 0.bar(36) expressed as a fraction in simplest form is 4/11. b) 0.3bar(6) expressed as a fraction in simplest form is 0.4. c) 0.36 expressed as a fraction in simplest form is 9/25.

(a)  To express 0.bar(36) as a fraction in simplest form, we can use the concept of repeating decimals. Let x = 0.bar(36). Multiplying x by 100 gives:

100x = 36.bar(36)

Subtracting the original equation from the multiplied equation eliminates the repeating part:

100x - x = 36.bar(36) - 0.bar(36)

99x = 36

x = 36/99

We can simplify this fraction by dividing both the numerator and denominator by their greatest common divisor, which is 9:

x = (36/9) / (99/9) = 4/11

Therefore, 0.bar(36) expressed as a fraction in simplest form is 4/11.

(b) o express 0.3bar(6) as a fraction in simplest form, let's call it x. Multiplying x by 10 gives:

10x = 3.6bar(6)

Subtracting the original equation from the multiplied equation eliminates the repeating part:

10x - x = 3.6bar(6) - 0.3bar(6)

9x = 3.6

x = 3.6/9

x = 0.4

Therefore, 0.3bar(6) expressed as a fraction in simplest form is 0.4.

(c) To express 0.36 as a fraction in simplest form, we can write it as 36/100 and simplify it. Both the numerator and denominator have a common factor of 4, so we can divide both by 4:

36/100 = 9/25

Therefore, 0.36 expressed as a fraction in simplest form is 9/25.

Learn more about fraction at https://brainly.com/question/78672

#SPJ1

The regression equation using IBM as the dependent variable and the S&P 500 as the independent variable can be used

to determine the percentage of the return for IBM that is explained by the returns of the S&P 500.

However, without access to the "Market Returns" file or the specific regression analysis results, it is not possible to determine the exact percentage.

The percentage of return for IBM explained by the returns of the S&P 500, also known as the coefficient of determination (R-squared), can range from 0% to 100%.

R-squared represents the proportion of the variance in the dependent variable (IBM) that is predictable from the independent variable (S&P 500).

A higher R-squared value indicates a stronger relationship between the variables and a higher percentage of the return for IBM being explained by the returns of the S&P 500. Without the regression analysis results, we cannot provide an accurate estimate of the percentage in this case.

Learn more about Market Returns here:

brainly.com/question/30048477

#SPJ11

Answer:

Step-by-step explanation:

(a) The length of time between consecutive high tides is 12 hours and 25 minutes. Therefore, the next high tide will occur 12 hours and 25 minutes after the previous one, which was at 2:12 am.

2:12 am + 12 hours and 25 minutes = 2:37 pm

So, the next high tide will occur at approximately 2:37 pm.

(b) To find a sinusoidal function that models the data, we need to determine the amplitude, period, phase shift, and vertical shift of the function.

Amplitude:

The height of the water at high tide was 5.27 feet, and the height of the water at low tide was 0.87 foot. Therefore, the amplitude of the function is:

A = (5.27 - 0.87) / 2 = 2.2 feet

Period:

The length of time between consecutive high tides is 12 hours and 25 minutes, which is the period of the function:

P = 12 hours + 25 minutes/60 minutes = 12.42 hours

Frequency:

The frequency of the function is the reciprocal of the period:

w = 2π / P = 2π / 12.42 ≈ 0.506

Phase Shift:

The function reaches its maximum (high tide) when x is equal to the phase shift. On Saturday, March 28, 2015, high tide occurred at 2:12 am, which is 2.2 hours after midnight. Therefore, the phase shift is:

θ = -2.2

Vertical Shift:

The function is measured with respect to the mean lower low water. The height of the water at low tide was 0.87 foot, which is the vertical shift of the function:

B = 0.87

To Know more about Tides refer here
https://brainly.com/question/22677272#
#SPJ11

The series solution for the differential equation xy'' - xy'y = 0, corresponding to the indicial root r = 0, is y(x) = a₀ + a₁x + a₂x² + a₃x³ + ...

To find the series solution corresponding to the indicial root r = 0 for the differential equation xy'' - xy'y = 0, we can use the method of Frobenius.

The indicial equation is given by r(r - 1) = 0, which has roots r = 0 and r = 1. We will focus on the root r = 0.

For the root r = 0, we assume a series solution of the form:

y(x) = Σ(aₙxⁿ)

Substituting this series into the differential equation, we can find the recurrence relation for the coefficients aₙ.

First, we differentiate y(x) with respect to x:

y'(x) = Σ(aₙn xⁿ⁻¹)

Next, we differentiate y'(x) with respect to x:

y''(x) = Σ(aₙn(n - 1) xⁿ⁻²)

Substituting these expressions into the differential equation, we get:

x(Σ(aₙn(n - 1) xⁿ⁻²)) - x(Σ(aₙn xⁿ⁻¹))(Σ(aₙxⁿ)) = 0

Expanding and reorganizing terms, we obtain:

Σ(aₙn(n - 1) xⁿ) - Σ(aₙn(n - 1) xⁿ) - Σ(aₙn xⁿ⁺¹) = 0

Simplifying, we have:

Σ(aₙn(n - 1) xⁿ) - Σ(aₙn(n - 1) xⁿ) - Σ(aₙn xⁿ⁺¹) = 0

Since this equation holds for all values of x, each term must vanish separately. Therefore, we can write the recurrence relation as:

aₙ(n(n - 1) - n(n - 1)) - aₙ₊₁ = 0

Simplifying, we get:

aₙ₊₁ = aₙ / (n(n - 1))

This recurrence relation allows us to compute the coefficients aₙ in terms of a₀.

Hence, the series solution for the differential equation xy'' - xy'y = 0, corresponding to the indicial root r = 0, is given by:

y(x) = a₀ + a₁x + a₂x² + a₃x³ + ...

where the coefficients aₙ can be determined using the recurrence relation aₙ₊₁ = aₙ / (n(n - 1)) with the initial condition a₀.

To learn more about differential equation here:

https://brainly.com/question/25731911

#SPJ4

The required answers are the speed of the satellite is `7842.6 m/s` and the time required to complete one orbit is `1.52 hours`.

Given that a satellite moves in a stable circular orbit of radius r = 6761 km and at constant speed.

And its centripetal acceleration is inversely proportional to the square of the radius r of the orbit. We need to find the speed of the satellite and the time required to complete one orbit.

Speed of the satellite:

We know that centripetal acceleration is given by the formula

`a=V²/r`

Where,a = centripetal accelerationV = Speed of the satellite,r = Radius of the orbit

The acceleration due to gravity `g` at an altitude `h` above the surface of Earth is given by the formula `

g = GM/(R+h)²`,

where `M` is the mass of the Earth, `G` is the gravitational constant, and `R` is the radius of the Earth.

Here, `h = 6761 km` (Radius of the orbit) Since `h` is much smaller than the radius of the Earth, we can assume that `R+h ≈ R`, where `R = 6371 km` (Radius of the Earth)

Then, `g = GM/R²`

Substituting the values,

`g = 6.67259 × 10^-11 × 5.98 × 10^24 / (6371 × 10^3)²``g = 9.81 m/s²`

Therefore, centripetal acceleration `a = g` at an altitude `h` above the surface of Earth.

Substituting the values,

`a = 9.81 m/s²` and `r = 6761 km = 6761000 m`

We have `a = V²/r` ⇒ `V = √ar`

Substituting the values,`V = √(9.81 × 6761000)`

⇒ `V ≈ 7842.6 m/s`

Therefore, the speed of the satellite is `7842.6 m/s`.

Time taken to complete one orbit:We know that time period `T` of a satellite is given by the formula

`T = 2πr/V`

Substituting the values,`

T = 2 × π × 6761000 / 7842.6`

⇒ `T ≈ 5464.9 s`

Therefore, the time required to complete one orbit is `5464.9 seconds` or `1.52 hours` (approx).

To know more about  acceleration  please visit :

https://brainly.com/question/460763

#SPJ11

The HCF is (a-2) and the LCM is 288(a+2)(a+1)(a+5) of 4(a²-4), 6(a²-a-2) and 12(a² + 3a-10)

To find the highest common factor (HCF) and least common multiple (LCM) of the given expressions, let's factorize each expression first:

4(a²-4) = 4(a+2)(a-2)

6(a²-a-2) = 6(a-2)(a+1)

12(a²+3a-10) = 12(a+5)(a-2)

The common factors among these expressions are (a-2). So the HCF is (a-2).

To find the LCM, we multiply all the distinct factors from the factorizations:

LCM = 4 × 6 × 12 × (a+2)(a+1)(a+5) = 288(a+2)(a+1)(a+5)

Therefore, the HCF is (a-2) and the LCM is 288(a+2)(a+1)(a+5).

Let's factorize each expression:

a(c + a) - b(b + c) = a² + ac - b² - bc

b(a + b) - c(c + a) = ab + b² - c² - ac

c(b + c) - a(a + b) = cb + c² - a² - ab

The common factors among these expressions are (a+b+c). So the HCF is (a+b+c).

To find the LCM, we multiply all the distinct factors from the factorizations:

LCM = (a+b+c)(a² + ac - b² - bc)(ab + b² - c² - ac)

Therefore, the HCF is (a+b+c) and the LCM is (a+b+c)(a² + ac - b² - bc)(ab + b² - c² - ac).

To learn more on LCM click:

https://brainly.com/question/24510622

#SPJ1

The correct statement for step 4 is,

⇒ If two lines are parallel and cut by a transversal , the corresponding angles have same measure,

Since, An angle is a combination of two rays (half-lines) with a common endpoint. The latter is known as the vertex of the angle and the rays as the sides, sometimes as the legs and sometimes the arms of the angle.

We have to given that;

Line p and q are parallel lines.

Since, All the steps for prove angle 3 and 5 are supplementary angle are shown in figure.

We know that;

When two lines are parallel and cut by a transversal , the corresponding angles have same measure.

Hence, By figure we get;

⇒ m ∠3 = m ∠7

Therefore, For step 4 statement is,

If two lines are parallel and cut by a transversal , the corresponding angles have same measure.

Learn more about the angle visit:;

https://brainly.com/question/25716982

#SPJ1

The flux of the vector field F = x^4y i - zk across the surface S, which is a portion of the cone z = 3√(x^2 + y^2) between z = 0 and z = 3, in the outward direction, is 2π.

To calculate the flux of the vector field F across the surface S, we need to evaluate the surface integral of the dot product between F and the outward-pointing normal vector of S.

The surface S represents a portion of a cone, bounded between z = 0 and z = 3. The equation z = 3√(x^2 + y^2) describes the shape of the cone.

To find the normal vector of S, we can take the gradient of the function z = 3√(x^2 + y^2). The gradient is given by

(∂z/∂x)i + (∂z/∂y)j - k, where (∂z/∂x) and (∂z/∂y) represent the partial derivatives of z with respect to x and y, respectively.

Evaluating these partial derivatives, we get the normal vector as

(3x√(x^2 + y^2)/√(x^2 + y^2))i + (3y√(x^2 + y^2)/√(x^2 + y^2))j - k = 3xi + 3yj - k.

The dot product of F = x^4y i - zk and the normal vector 3xi + 3yj - k is given by (x^4y)(3x) + (-1)(-1) = 3x^5y + 1.

Now, to calculate the flux, we integrate this dot product over the surface S. Since S is a portion of the cone, we can use cylindrical coordinates for the integration. After evaluating the integral, we find that the flux is equal to 2π.

Therefore, the correct answer is a) 2π.

Learn more about partial derivatives here:

https://brainly.com/question/6732578

#SPJ11

The statements that must be true are A, C, and E.

The correct statements that must be true for the diagonals of parallelogram PQRS that intersect at Z are given below:A. QZ = SZBecause the diagonals of a parallelogram bisect each other, therefore QZ = SZB. QsRPThis is not necessarily true because PQRS is a parallelogram and not necessarily a rhombus.C. ZQZR = ZQZPThis statement is true because PQRS is a parallelogram.D. ZQRP = ZSRPThis is not necessarily true because PQRS is a parallelogram and nnecessarily a kite.E. ZQZP = ZRZSThis statement is true because PQRS is a parallelogram.Therefore, the statements that must be true are A, C, and E.

Learn more about Diagonal here,*. If (2,3) and (-6,5) are the end points of diagonal of a square. Find the equation of another diagonal.

Please help w...

https://brainly.com/question/17759194

#SPJ11

Answer: x=4

Step-by-step explanation:

0=2x²-16x+32                 >Take out GCF

0=2(x²-8x+16)                 >Find 2 numbers that multiple to last term, +16,

                                               but add to middle term, -8

                                               -4 and -4 multiply to +16 and add to -8

                                               put -4 and -4 into factored form

0=2(x-4)(x-4)                   >Divide both sides by 2

0=(x-4)(x-4)                      >Normally you would set both parenthesis to 0

                                          but they are the same so set the x-4=0

x-4=0

x=4

Answer:

ima say B

Step-by-step explanation:

[tex]$\mathbb{Q}(\sqrt{2})$[/tex] is isomorphic to [tex]$\mathbb{Q}[x] /(x^2-2)$[/tex], as desired.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

Show that [tex]$\mathbb{Q}(\sqrt{2})$[/tex] is isomorphic to [tex]$\mathbb{Q}[x] /(x^2-2)$[/tex] :

We define a function [tex]$\phi[/tex] : [tex]\mathbb{Q}[x] \to \mathbb{Q}(\sqrt{2})$[/tex]  by [tex]$\phi(f(x)) = f(\sqrt{2})$[/tex].

This function is clearly a homomorphism since it preserves addition and multiplication.

Furthermore, we see that [tex]$\phi(x^2-2) = (\sqrt{2})^2-2 = 0$[/tex],

so the kernel of [tex]$\phi[/tex] contains the ideal generated by [tex]$x^2-2$[/tex].

By the first isomorphism theorem, there exists an isomorphism [tex]$\operator{deg}(r) < \operator{deg}(x^2-2) = 2$[/tex][tex]$\tilde{\phi} : \mathbb{Q}[x] /(x^2-2) \to[/tex][tex]\operator{im}(\phi)$.[/tex]

It remains to show that [tex]$\tilde{\phi}$[/tex]  is surjective. Let [tex]$a+b\sqrt{2} \in \mathbb{Q}(\sqrt{2})$[/tex] be an arbitrary element. Since [tex]$\mathbb{Q}[x]$[/tex] is a polynomial ring, we can apply the division algorithm to find [tex]$q(x),r(x) \in \mathbb{Q}[x]$[/tex] such that [tex]$a+b\sqrt{2} = q(\sqrt{2}) + r(\sqrt{2})$[/tex]  where [tex]$\operator{deg}(r) < \operator{deg}(x^2-2) = 2[/tex].

But then [tex]$r(\sqrt{2}) = a+b\sqrt{2} - q(\sqrt{2}) \in \operator{im}(\phi)[/tex], so [tex]$\tilde{\phi}$[/tex] is surjective.

Therefore, [tex]$\mathbb{Q}(\sqrt{2})$[/tex] is isomorphic to [tex]$\mathbb{Q}[x] /(x^2-2)$[/tex], as desired.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ4

Answer:

[tex]5+2\sqrt6[/tex]

Step-by-step explanation:

[tex](\sqrt3+\sqrt2)^2\\\\=(\sqrt3)^2+2.\sqrt3.\sqrt2+(\sqrt2)^2 \\\\=3+2.\sqrt{3(2)}+2\ \ \ \ \ \ \ \ \ \ \ \ (\sqrt{a}.\sqrt b=\sqrt{ab},\ \mathrm{if}\ a,b\ge 0)\\=5+2\sqrt6[/tex]

Thus, If the z-score is less than -1.96 or greater than 1.96, reject the null hypothesis, concluding that the diet is effective in reducing weight.

To address your question using the signed-rank test at the 0.05 level of significance, I'll provide a concise explanation that covers the key aspects without going over 200 words.

(a) Based on Table 20:
1. Calculate the differences in weight for each individual before and after the diet.
2. Rank the absolute values of these differences, ignoring the sign.
3. Sum the ranks of the positive and negative differences separately (i.e., T+ and T-).
4. Determine the smaller of the two sums (T) and compare it to the critical value found in Table 20 (for your specific sample size) at the 0.05 level of significance.

If T is smaller than or equal to the critical value, reject the null hypothesis, concluding that the diet is effective in reducing weight.

(b) Based on the normal approximation of the Wilcoxon test statistic:
1. Follow steps 1-3 from part (a) to calculate T.
2. Calculate the mean (μ) and standard deviation (σ) of the sum of ranks for your sample size using the appropriate formulas.
3. Calculate the z-score using the formula: z = (T - μ) / σ.
4. Compare the z-score to the critical z-value at the 0.05 level of significance (typically ±1.96 for a two-tailed test).

If the z-score is less than -1.96 or greater than 1.96, reject the null hypothesis, concluding that the diet is effective in reducing weight.

Know more about the null hypothesis,

https://brainly.com/question/4436370

#SPJ11

a) The probability that ^p > 0.12 is 0.1711.

b) The probability that ^p < 0.10 is 0.5.

c) The probability that the sample proportion ^p lies within 0.02 of p is 0.6247.

a. We want to find the probability that the sample proportion ^p is greater than 0.12. We can standardize the sample proportion using the formula z = (^p - p) / √(pq/n), which gives us

=> z = (0.12 - 0.1) / 0.02099 = 0.954.

We can then use a standard normal distribution calculator to find the probability that Z > 0.954, which is approximately 0.1711.

b. We want to find the probability that the sample proportion ^p is less than 0.10. Again, we can standardize using the formula z = (^p - p) / √(pq/n), which gives us

=> z = (0.10 - 0.1) / 0.02099 = 0.

We can then find the probability that Z < 0 using a standard normal distribution table or calculator, which is approximately 0.5.

c. We want to find the probability that the sample proportion ^p lies within 0.02 of p. This means we want to find P(0.08 < ^p < 0.12).

We can standardize both values using the formula z = (^p - p) / sqrt(pq/n), which gives us

=> z = (0.08 - 0.1) / 0.02099 = -0.954

and

=> z = (0.12 - 0.1) / 0.02099 = 0.954.

We can then find the probability that -0.954 < Z < 0.954 using a standard normal distribution calculator, which is approximately 0.6247.

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

Complete Question:

Random samples of size and equals 500 were selected from a binomial population with p equals 1 .

Check to make sure that it is appropriate to use the normal distribution to approximate the sampling distribution of p.

Then use this result to find the probabilities in Exercises a-c.

a. ^p > 0.12.

b. ^p < 0.10.

c. ^p lies within 0.02 of p.

We need to divide the total cost by the number of books in the package. Each book costs approximately $1.10.

To find out how much each book costs, we can use the concept of unit rate. Unit rate is a ratio of two quantities, where the denominator is always one. In this case, we want to find the cost of one book, so we need to divide the total cost by the number of books in the package.

Let x be the cost of one book. Then we have:

3x = 3.29

To solve for x, we can divide both sides by 3:

x = 3.29/3

x ≈ 1.10

Learn more about cost at: brainly.com/question/14566816

#SPJ11

Angelina ordered 10 lipsticks from the online makeup website. The total cost of Angelina’s order before tax is $87. 75. We are asked to determine the total number of lipsticks she ordered.

Let's denote the number of lipsticks Angelina ordered as 'x'. Each lipstick costs $7.50, so the cost of 'x' lipsticks is 7.50x. Additionally, a one-time shipping fee of $3.25 is added to the total cost. Therefore, the total cost of Angelina's order before tax can be expressed as:

Total cost = Cost of lipsticks + Shipping fee

87.75 = 7.50x + 3.25

To find the value of 'x', we need to solve the equation. Rearranging the equation, we have:

7.50x = 87.75 - 3.25

7.50x = 84.50

x = 84.50 / 7.50

x = 11.27

Since the number of lipsticks cannot be a fraction, we can round down to the nearest whole number. Therefore, Angelina ordered 10 lipsticks from the online makeup website.

In conclusion, Angelina ordered 10 lipsticks based on the given information and the solution to the algebraic equation.

Learn more about fraction here:

https://brainly.com/question/10354322

#SPJ11

The equation for function 1 is y = -2x + 10 and the y-intercept is 10. The y-intercept is the point at which the graph of the equation crosses the y-axis, where x = 0.

The table shows the values for function 2: 0, 2, 4, and 6 as input and 10, 5, 0, and -5 as the corresponding output values. In other words, when x = 0, the output value is 10. Therefore, the y-intercept for function 2 is 10.

Since the y-intercept of function 2 is 10, and the y-intercept of function 1 is 10, we can conclude that both functions have the same y-intercept of 10.Therefore, neither function has a greater y-intercept than the other. They both have the same y-intercept value of 10.

Know more about y-intercept here:

https://brainly.com/question/1354826

#SPJ11

The function g repeats every 20 seconds.

a. The measure of the angle of rotation after t seconds can be found using the formula:
∅ = 0.1t

Since the minute hand rotates 0.1 radius lengths per second counter-clockwise, the angle of rotation in radians can be found by multiplying the rate of rotation (0.1) by the time elapsed (t).

Therefore, the angle of rotation after t seconds is equal to 0.1t radians.

b. To define a function g that relates the minute hand's vertical distance above the center of the clock (in radius lengths) as a function of the number of seconds elapsed, we need to consider the geometry of the clock.

The minute hand is a straight line that extends from the center of the clock to the outer edge, and it rotates around the center point.

Let's assume that the radius of the clock is 1 unit. At the 15-minute mark, the minute hand is located at a distance of 0.25 units above the center of the clock (since the minute hand is at the 3 o'clock position, which is one-quarter of the way around the clock).

As the minute hand rotates, its vertical distance above the center point changes.

We can use trigonometry to find the vertical distance above the center point as a function of the angle of rotation. Let θ be the angle of rotation in radians.

Then, the vertical distance above the center point is given by:

g(θ) = sin(θ)

Since the angle of rotation is related to the time elapsed by the formula ∅ = 0.1t, we can also express g as a function of time:

g(t) = sin(0.1t)

c. To find how long it takes for the minute hand to complete a full rotation, we need to find the time it takes for the angle of rotation to reach 2π radians.

Using the formula from part (a), we have:

2π = 0.1t

Solving for t, we get:

t = 20π

Therefore, it takes 20π seconds (approximately 62.8 seconds) for the minute hand to complete a full rotation.

d. The period of the function g is the time it takes for the function to repeat itself. Since the sine function has a period of 2π, the period of the function g is:

T = 2π/0.1

T = 20 seconds

Therefore, the function g repeats every 20 seconds.

Know more about the function here:

https://brainly.com/question/22340031

#SPJ11

The series converges because the limit of the ratio test is < 1.

To determine if the series is convergent or divergent using the ratio test, you first need to identify a_k, which is the general term of the series. In this case, a_k = 6k [tex]e^-^k[/tex] . Then, evaluate the limit lim (k→∞) (a_(k+1) / a_k). If the limit is < 1, the series converges; if it's > 1, it diverges.

We have a_k = 6k [tex]e^-^k[/tex]. Apply the ratio test by finding lim (k→∞) (a_(k+1) / a_k) = lim (k→∞) [(6(k+1)[tex]e^-^(^k^+^1^)[/tex]))/(6k [tex]e^-^k[/tex])]. Simplify to get lim (k→∞) ((k+1)/k * e⁻¹). As k approaches infinity, the ratio approaches e⁻¹, which is < 1. Therefore, the series converges.

To know more about ratio test click on below link:

https://brainly.com/question/15586862#

#SPJ11

The probability of selecting an odd number on the first draw and a number less than 4 on the second draw is 3/20.

To solve this problem, we need to consider the probability of each event separately and then multiply them together to get the probability of both events happening together.
First, let's consider the probability of selecting an odd number on the first draw. There are five odd numbers (1, 3, 5, 7, 9) out of ten total cards, so the probability of selecting an odd number on the first draw is 5/10 or 1/2.
Next, let's consider the probability of selecting a number less than 4 on the second draw. There are three such cards (1, 2, 3) out of ten remaining cards (since we replaced the first card), so the probability of selecting a number less than 4 on the second draw is 3/10.
To find the probability of both events happening together (i.e. selecting an odd number on the first draw and a number less than 4 on the second draw), we multiply the probabilities of each event:
P(odd number on first draw) * P(number less than 4 on second draw) = (1/2) * (3/10) = 3/20
Therefore, the probability of selecting an odd number on the first draw and a number less than 4 on the second draw is 3/20.

For more questions on probability

https://brainly.com/question/30460538

#SPJ11

The sample variance is 52.80, and the standard deviation is approximately 7.27.

To compute the sample variance and standard deviation of the data sample (-9, 9, 9, 9, 0, 6), follow these steps:

1. Calculate the mean (average) of the data set: (-9 + 9 + 9 + 9 + 0 + 6) / 6 = 24 / 6 = 4
2. Subtract the mean from each data point and square the result: [(-9-4)², (9-4)², (9-4)², (9-4)², (0-4)², (6-4)²] = [169, 25, 25, 25, 16, 4]
3. Sum the squared differences: 169 + 25 + 25 + 25 + 16 + 4 = 264
4. Divide the sum by (n-1) for the sample variance, where n is the number of data points: 264 / (6-1) = 264 / 5 = 52.8
5. Take the square root of the variance for the standard deviation: √52.8 ≈ 7.27

To know more about sample variance click on below link:

https://brainly.com/question/13708253#

#SPJ11