The best way to do the experiment on finding the focal length of a concave mirror by obtaining the image of a distant object is to keep both the mirror and the screen in suitable stands with the screen put behind the mirror, hence option D) is correct
The best way to do the experiment on finding the focal length of a concave mirror by obtaining the image of a distant object is to keep both the mirror and the screen in suitable stands with the screen put behind the mirror, which is option (d). This is because a concave mirror forms a real image of a distant object at its focus, and the light rays from the object converge to the focus after reflecting from the mirror. In this case, the distant object should be placed at a distance greater than the focal length of the mirror, and the screen should be placed at the position of the focus of the mirror to obtain a sharp image. By keeping both the mirror and the screen in suitable stands with the screen put behind the mirror, we can ensure that the distance between the mirror and the screen is equal to the focal length of the mirror, which is required to obtain a sharp image of the distant object.
For more question on focal length
https://brainly.com/question/9615224
#SPJ11
if m(t) is frequency modulated with kf = 4hz/v, then determine the expression for the instantaneous frequency and phase deviation as a function of time in each of the time intervals
The expression for the instantaneous frequency and phase deviation as a function of time in each of the time intervals can be determined using the formula: Instantaneous frequency = fc + kf * m(t)
Frequency modulation (FM) is a type of modulation where the frequency of the carrier signal is varied in accordance with the message signal. The amount of frequency deviation is proportional to the amplitude of the message signal. The rate of change of frequency with respect to the amplitude of the message signal is called the frequency sensitivity or modulation index, denoted by kf. Instantaneous frequency = fc + 4 * m(t) The instantaneous frequency is the frequency of the carrier signal at any given instant of time. It varies with the amplitude of the message signal, and its expression is given by the above formula.
The phase deviation is the change in the phase of the carrier signal due to the frequency modulation. It is proportional to the integral of the message signal and is given by the above formula. The phase deviation is important because it determines the amount of phase shift between the modulated signal and the carrier signal. This phase shift can affect the demodulation process and, therefore, needs to be considered in the design of FM systems. stantaneous frequency is the sum of the carrier frequency (fc) and the product of the modulation index (kf) and the modulating signal (m(t)).
To know more about frequency visit:
https://brainly.com/question/2140860
#SPJ11
visible light having a wavelength of 6.2 × 10-7 m appears orange. compute the following using scientific notation and 3 signficant digits.
Therefore, visible light having a wavelength of 6.2 × 10-7 m appears orange, with a frequency of 4.84 × 1014 Hz, an energy of 3.21 × 10-19 J, and a photon energy of 1.98 eV.
To compute the following using scientific notation and 3 significant digits, we can use the following formula:
frequency (Hz) = speed of light (m/s) / wavelength (m)
First, let's convert the wavelength from meters to nanometers (nm) since it's a more commonly used unit for visible light:
6.2 × 10-7 m = 620 nm
Now, we can plug in the values into the formula:
frequency = 3.00 × 108 m/s / 620 × 10-9 m
frequency = 4.84 × 1014 Hz
Next, we can use the formula:
energy (J) = Planck's constant (J·s) × frequency (Hz
Planck's constant is 6.626 × 10-34 J·s. Plugging in the values:
energy = 6.626 × 10-34 J·s × 4.84 × 1014 Hz
energy = 3.21 × 10-19 J
Finally, we can use the formula:
photon energy (eV) = energy (J) / electron charge (C) × electron volt (eV)
The electron charge is 1.602 × 10-19 C and 1 eV is equivalent to 1.602 × 10-19 J. Plugging in the values:
photon energy = 3.21 × 10-19 J / (1.602 × 10-19 C × 1.602 × 10-19 J/eV)
photon energy = 1.98 eV
Therefore, visible light having a wavelength of 6.2 × 10-7 m appears orange, with a frequency of 4.84 × 1014 Hz, an energy of 3.21 × 10-19 J, and a photon energy of 1.98 eV.
To know more about wavelength visit:-
https://brainly.com/question/7143261
#SPJ11
What is the critical angle for the interface between water and crown glass? nglass= 1.52, nwater=1.33.
Express your answer using three significant figures.
?C = ?
Part B
To be internally reflected, the light must start in which material?
To be internally reflected, the light must start in which material?
in water
in crown glass
in any of the materials
none of the above
For water and crown glass, the critical angle is sinC = 1.52/1.33 = 1.144
The light must start in the material with the higher refractive index, which in this case is the crown glass.
The critical angle is the minimum angle of incidence at which a light ray is refracted at an interface and no longer enters the second medium, but rather undergoes total internal reflection. It can be calculated using the formula sinC = n2/n1, where n1 is the refractive index of the first medium (in this case, water) and n2 is the refractive index of the second medium (in this case, crown glass).
Therefore, for water and crown glass, the critical angle is sinC = 1.52/1.33 = 1.144. Taking the inverse sine of this value gives the critical angle as C = 48.8 degrees. This means that any incident ray of light that exceeds an angle of 48.8 degrees with the normal to the interface between water and crown glass will undergo total internal reflection and not enter the crown glass.
To be internally reflected, the light must start in the material with the higher refractive index, which in this case is the crown glass. When a ray of light travels from crown glass into water at an angle greater than the critical angle, it will undergo total internal reflection and bounce back into the crown glass, rather than being refracted out into the water.
To know more about critical angle visit:
https://brainly.com/question/9896008
#SPJ11
The block has a mass of 40 kg and rests on the surface of the cart having a mass of 84 kg. If the spring which is attached to the cart and not the block is compressed 0.2 m and the system is released from rest, determine the speed of the block with respect to the cart after the spring becomes unreformed. Neglect the mass of the wheels and the spring in the calculation. Also, neglect friction. Take k = 320 N/m.
The speed of the block with respect to the cart after the spring becomes unreformed is 0.321 m/s.
Find speed of block on cart.We can solve this problem using the conservation of energy principle. The potential energy stored in the spring when it is compressed is converted into kinetic energy of the system when it is released.
The potential energy stored in the spring is given by:
[tex]U = (1/2) k x^2[/tex]
where k is the spring constant and x is the compression of the spring.
In this case, U = (1/2)(320 N/m)[tex](0.2 m)^2[/tex] = 6.4 J.
When the system is released, the potential energy of the spring is converted into kinetic energy of the system. The total kinetic energy of the system can be expressed as:
K = (1/2) m_total[tex]v^2[/tex]
where m_total is the total mass of the system (block + cart) and v is the speed of the block with respect to the cart.
Since the system starts from rest, the initial kinetic energy is zero. Therefore, the total kinetic energy of the system when the spring becomes unreformed is equal to the potential energy stored in the spring:
K = U = 6.4 J
Substituting the values, we get:
(1/2)(40 kg + 84 kg)[tex]v^2[/tex] = 6.4 J
Simplifying:
[tex]v^2[/tex] = (2 x 6.4 J) / 124 kg
[tex]v^2[/tex]= 0.1032
v = √ (0.1032) = 0.321 m/s
Learn more about speed
brainly.com/question/30462853
#SPJ11
What is the S-P interval (lag time) for the seismogram at the Maesters station at The Eyrie (EYR)? a. 29 sec b. 32 sec c. 44 sec d. 72 sec e. 81 sec
Step 1:
The main answer is as follows:
The S-P interval (lag time) for the seismogram at the Maesters station at The Eyrie (EYR) is X seconds.
Step 2:
What is the duration of the S-P interval (lag time)?
Step 3:
The S-P interval, also known as the lag time, is the time difference between the arrival of the S-wave and the P-wave on a seismogram. The S-wave is a secondary wave that follows the primary P-wave in seismic events. By measuring the time interval between the arrival of these two waves, seismologists can estimate the distance between the seismic event and the recording station.
To determine the S-P interval, seismologists analyze the seismogram recorded at the Maesters station at The Eyrie (EYR). They identify the arrival times of the P-wave and the S-wave and calculate the time difference between them. This lag time provides valuable information about the distance of the earthquake from the station.
In this case, the specific value of the S-P interval is not provided, so it cannot be determined without additional information. The correct option can only be determined by referring to the specific seismogram or data associated with the seismic event.
Learn more about Seismology
#SPJ11
Which best describes when electrical conduit is required by code?
For all wiring within a wall
For all wiring in a single-family residence
For all wiring in nonresidential occupancies
For all wiring in fire-resistant construction
For all wiring within a wall is best describes when electrical conduit is required by code.
When is electrical conduit required by code?Electrical conduit is required by code for all wiring within a wall. Electrical conduit serves as a protective channel that houses electrical wires and cables. It helps to ensure the safety and integrity of the electrical installation by providing physical protection against damage, such as impact or exposure to moisture. Conduit also allows for easy maintenance and future modifications to the electrical system.
Within a wall, wiring is typically concealed and can be susceptible to various hazards. The use of conduit helps prevent accidental damage and reduces the risk of electrical fires or other electrical hazards. It provides a secure pathway for the wires and offers additional protection against potential issues like short circuits or insulation damage.
In different types of occupancies, such as single-family residences or nonresidential buildings, specific code requirements may exist regarding the use of electrical conduit. However, the general practice of using conduit for all wiring within a wall is a common requirement to ensure electrical safety. So, for all wiring within a wall is best describes when electrical conduit is required by code.
Learn more about electrical conduit Electrical conduit
brainly.com/question/30551984
#SPJ11
An emf source with a magnitude of E = 120.0 V, a resistor with a resistance of R = 77.0 Ω, and a capacitor with a capacitance of C = 5.30 μF are connected in series. A) As the capacitor charges, when the current in the resistor is 0.950 A , what is the magnitude of the charge on each plate of the capacitor?
To find the magnitude of the charge on each plate of the capacitor, we need to use the formula Q = CV, where Q is the charge, C is the capacitance, and V is the voltage across the capacitor.
First, we need to find the voltage across the capacitor. Since the circuit is in series, the voltage across the capacitor and the resistor must add up to the voltage of the emf source. Using Ohm's law, we can find the voltage across the resistor:
V = IR
V = (0.950 A)(77.0 Ω)
V = 73.15 V
So, the voltage across the capacitor is:
Vc = Emf - Vr
Vc = 120.0 V - 73.15 V
Vc = 46.85 V
Now, we can use the formula Q = CV to find the charge on each plate of the capacitor:
Q = CV
Q = (5.30 μF)(46.85 V)
Q = 248.5 μC
Therefore, the magnitude of the charge on each plate of the capacitor is 248.5 μC.
To know more about resistor visit:
https://brainly.com/question/24297401
#SPJ11
Which of the following is not key evidence in support of the idea that all life today shares a common ancestor?
We have identified fossils of the first life forms that ever existed on Earth.
The identification of fossils of the first life forms that ever existed on Earth is not key evidence in support of the idea that all life today shares a common ancestor.
The existence of fossils does provide evidence for the presence of ancient life on Earth, but it does not directly support the idea of a common ancestor. Fossils can show us the diversity of life forms that have existed throughout history, but they do not provide definitive proof of a single common ancestor for all life today. Other forms of evidence, such as genetic similarities and shared biochemical processes, are more crucial in supporting the concept of a common ancestor for all life on Earth.
learn more about ancestor here:
https://brainly.com/question/30394210
#SPJ11
Derive an expression for the transfer function H(f)=V out /V in for the circuit shown in Figure P6.34. Find an expression for the half-power frequency. b. Given R 1 =50Ω, R 2 =50Ω, and L=15μH, sketch (or use MATLAB to plot) the magnitude of the transfer function versus frequency. Figure P6.34
The transfer function H(f) for the circuit in Figure P6.34 can be derived as a function of frequency f.
How can the transfer function H(f) be expressed for the circuit in Figure P6.34?To derive the transfer function H(f) for the circuit shown in Figure P6.34, we need to analyze the circuit and determine the relationship between the input voltage Vin and the output voltage Vout as a function of frequency f.
The circuit consists of resistors R1 and R2, and an inductor L. To find the transfer function, we can use the principles of circuit analysis and apply Kirchhoff's laws.
First, let's consider the impedance of the inductor. The impedance of an inductor is given by the equation[tex]Z_L = j2πfL[/tex], where j is the imaginary unit, f is the frequency, and L is the inductance. In this case, the impedance of the inductor is j2πfL.
Next, we can calculate the total impedance of the circuit by considering the parallel combination of R2 and the inductor. The impedance of resistors in parallel is given by the equation[tex]1/Z = 1/R1 + 1/R2.[/tex] Substituting the impedance of the inductor, we get[tex]1/Z = 1/R1 + 1/(j2πfL).[/tex]Solving for Z, we obtain[tex]Z = (R1 * j2πfL) / (R1 + j2πfL).[/tex]
Now, using voltage division, we can express the output voltage Vout in terms of Vin and the impedances. The transfer function H(f) is defined as H(f) = Vout / Vin. Applying voltage division, we have H(f) = (Z / (R1 + Z)). Substituting the expression for Z, we get [tex]H(f) = [(R1 * j2πfL) / (R1 + j2πfL)] / Vin.[/tex]
Simplifying the expression by multiplying the numerator and denominator by the complex conjugate of the denominator, we obtain [tex]H(f) = (R1 * j2πfL) / (R1 + j2πfL) * (R1 - j2πfL) / (R1 - j2πfL) = (R1 * j2πfL * (R1 - j2πfL)) / [(R1)² + (2πfL)²].[/tex]
The transfer function H(f) is now expressed as a function of frequency f.
To find the half-power frequency, we need to determine the frequency at which the magnitude of the transfer function H(f) is equal to half its maximum value. The magnitude of H(f) can be calculated as [tex]|H(f)| = |(R1 * j2πfL * (R1 - j2πfL)) / [(R1)² + (2πfL)²]|.[/tex]
To sketch or plot the magnitude of the transfer function versus frequency, we can substitute the given values R1 = 50Ω, R2 = 50Ω, and L = 15μH into the expression for |H(f)|. Then, using MATLAB or any other plotting tool, we can graph the magnitude of H(f) as a function of frequency.
Learn more about circuit analysis
brainly.com/question/29144531
#SPJ11
if you plug an electric toaster rated at 110v into a 220v outlet the current drawn by the toaster will be
If you plug an electric toaster rated at 110V into a 220V outlet, the current drawn by the toaster will increase significantly. This is due to Ohm's Law, which states that the current flowing through a conductor is directly proportional to the voltage applied and inversely proportional to the resistance of the conductor.
The toaster is designed to operate at 110V, which means its internal components, such as the heating elements, are designed to handle that voltage. When it is plugged into a 220V outlet, the voltage across the toaster doubles. As a result, the current drawn by the toaster will also double, assuming the resistance of the toaster remains constant.
Since the power consumed by the toaster is the product of voltage and current (P = VI), doubling the voltage while maintaining the same resistance will result in double the power consumption. This increase in power can cause the heating elements to overheat and potentially burn out or cause damage to the toaster.
Therefore, it is crucial to match the rated voltage of electrical appliances with the voltage supplied by the outlet to prevent potential damage or hazards.
To know more about electric toaster click this link-
https://brainly.com/question/31793099
#SPJ11
An LC circuit oscillates at a frequency of 10.4kHz. (a) If the capacitance is 340μF, what is the inductance? (b) If the maximum current is 7.20mA, what is the total energy in the circuit? (c) What is the maximum charge on the capacitor?
(a) The resonant frequency of an LC circuit is given by the equation:
f = 1 / (2π√(LC))
Where f is the frequency, L is the inductance, and C is the capacitance.
We can rearrange this equation to solve for L:
L = 1 / (4π²f²C)
Plugging in the given values, we get:
L = 1 / (4π² * (10.4kHz)² * 340μF) = 0.115H
Therefore, the inductance of the circuit is 0.115H.
(b) The total energy in an LC circuit is given by the equation:
E = 1/2 * L *[tex]I_{max}[/tex]²
Where E is the total energy, L is the inductance, and [tex]I_{max}[/tex] is the maximum current.
Plugging in the given values, we get:
E = 1/2 * 0.115H * (7.20mA)² = 0.032J
Therefore, the total energy in the circuit is 0.032J.
(c) The maximum charge on the capacitor is given by the equation:
[tex]Q_{max}[/tex]= C *[tex]V_{max}[/tex]
Where [tex]Q_{max}[/tex] is the maximum charge, C is the capacitance, and [tex]V_{max}[/tex] is the maximum voltage.
At resonance, the maximum voltage across the capacitor and inductor are equal and given by:
[tex]V_{max}[/tex] = [tex]I_{max}[/tex] / (2πfC)
Plugging in the given values, we get:
[tex]V_{max}[/tex] = 7.20mA / (2π * 10.4kHz * 340μF) = 0.060V
Therefore, the maximum charge on the capacitor is:
[tex]Q_{max}[/tex] = 340μF * 0.060V = 20.4μC
To know more about refer inductance here
brainly.com/question/10254645#
#SPJ11
Light of wavelength λ = 595 nm passes through a pair of slits that are 23 μm wide and 185 μm apart. How many bright interference fringes are there in the central diffraction maximum? How many bright interference fringes are there in the whole pattern?
The number of bright interference fringes in the central diffraction maximum can be found using the formula:
n = (d sin θ) / λwhere n is the number of fringes, d is the distance between the slits, θ is the angle between the central maximum and the first bright fringe, and λ is the wavelength of light.
For the central maximum, the angle θ is zero, so sin θ = 0. Therefore, the equation simplifies to:
n = 0So there are no bright interference fringes in the central diffraction maximum.
The number of bright interference fringes in the whole pattern can be found using the formula:
n = (mλD) / dwhere n is the number of fringes, m is the order of the fringe, λ is the wavelength of light, D is the distance from the slits to the screen, and d is the distance between the slits.
To find the maximum value of m, we can use the condition for constructive interference:
d sin θ = mλwhere θ is the angle between the direction of the fringe and the direction of the center of the pattern.
For the first bright fringe on either side of the central maximum, sin θ = λ/d. Therefore, the value of m for the first bright fringe is:
m = d/λSubstituting this value of m into the formula for the number of fringes, we get:
n = (d/λ)(λD/d) = DSo there are D bright interference fringes in the whole pattern, where D is the distance from the slits to the screen, in units of the wavelength of light.
Learn More About bright fringe at https://brainly.com/question/31754396
#SPJ11
Tthe hand on a certain stopwatch makes one complete revolution every three seconds. express the magnitude of the angular velocity of this hand in radians per second.
The angular velocity of the hand on the stopwatch can be calculated by dividing the angle it rotates in one revolution by the time it takes to complete one revolution. Since the hand makes one complete revolution every three seconds, the time it takes to complete one revolution is 3 seconds.
The angle that the hand rotates in one revolution is 360 degrees or 2π radians. Therefore, the angular velocity of the hand in radians per second can be calculated as:
Angular velocity = Angle rotated / Time taken
Angular velocity = 2π / 3
Angular velocity = 2.094 radians per second
Therefore, the magnitude of the angular velocity of the hand on the stopwatch is 2.094 radians per second.
Hi, I'd be happy to help you with your question! To find the angular velocity of the hand on the stopwatch in radians per second, we will use the given information that it makes one complete revolution every three seconds.
Your question: The hand on a certain stopwatch makes one complete revolution every three seconds. Express the magnitude of the angular velocity of this hand in radians per second.
Step 1: Determine the total angle covered in one revolution.
One complete revolution corresponds to an angle of 2π radians.
Step 2: Divide the total angle by the time taken for one revolution.
To find the angular velocity (ω), we will divide the total angle (2π radians) by the time taken for one revolution (3 seconds).
ω = (2π radians) / (3 seconds)
Step 3: Simplify the expression.
ω ≈ 2.094 radians/second
The magnitude of the angular velocity of the hand on the stopwatch is approximately 2.094 radians per second.
To know about Velocity visit:
https://brainly.com/question/17127206
#SPJ11
a sample of helium gas occupies 19.1 l at 23°c and 0.956 atm. what volume will it occupy at 40°c and 1.20 atm? [1]
The volume the gas will occupy at 40°C and 1.20 atm is approximately 23.6 L.
To determine the volume the gas will occupy, we can use the combined gas law equation:
(P₁V₁)/T₁ = (P₂V₂)/T₂
Where:
P₁ = 0.956 atm (initial pressure)
V₁ = 19.1 L (initial volume)
T₁ = 23°C + 273.15 = 296.15 K (initial temperature in Kelvin)
P₂ = 1.20 atm (final pressure)
V₂ = ? (final volume that we want to find)
T₂ = 40°C + 273.15 = 313.15 K (final temperature in Kelvin)
Now we can plug in these values and solve for V₂:
(0.956 atm x 19.1 L) / 296.15 K = (1.20 atm x V₂) / 313.15 K
Simplifying:
V₂ = (0.956 atm x 19.1 L x 313.15 K) / (1.20 atm x 296.15 K)
V₂ = 23.6 L (rounded to 3 significant figures)
Therefore, the volume of helium gas at 40°C and 1.20 atm will be approximately 23.6 L.
Learn more about combined gas law here: https://brainly.com/question/29341891
#SPJ11
A beam of unpolarized light in material X, with index 1.19, is incident on material Y. Brewster's angle for this interface is found to be 46.3 degrees. What is the index of refraction of material Y?a) 1.60 b) 1.25 c) 0.976 d) 1.40
If a beam of unpolarized light in material X, with index 1.19, is incident on material Y. Brewster's angle for this interface is found to be 46.3 degrees. Then the index of refraction of material Y is 1.60.The correct answer is option a.
The formula for Brewster's angle is given by:
tan θB = n2/n1
where θB is the Brewster's angle, n1 is the index of refraction of the incident medium, and n2 is the index of refraction of the refracted medium.
In this case, the incident medium is material X with an index of refraction of 1.19. The Brewster's angle is given as 46.3 degrees. We can rearrange the above formula to solve for n2:
n2 = n1 ×tan θB
n2 = 1.19 ×tan 46.3
n2 = 1.60
Therefore, the index of refraction of material Y is 1.60. The correct answer is (a) 1.60.
To learn more about index of refraction https://brainly.com/question/12469161
#SPJ11
a silicon pn junction at t 300 k with zero applied bias has doping concentrations of nd = 5 x 10 15 cm-3 and Nd = 5 x 1016 cm3. n; = 1.5 x 1010 cm. € = 11.7. A reverse-biased voltage of VR = 4 V is applied. Determine (a) Built-in potential Vbi (b) Depletion width Wdep (c) Xn and Xp (d) The maximum electric field Emax N-type P-type Ni N. 0
(a) The built-in potential [tex]V_{bi[/tex] = 0.73 V
(b) Depletion width [tex](W_{dep})[/tex] = 0.24 μm
(c) [tex]X_n[/tex] = 0.20 μm, [tex]X_p[/tex] = 0.04 μm
(d) The maximum electric field [tex]E_{max[/tex] = 3.04 MV/cm.
a) Built-in potential (Vbi):
[tex]V_{bi[/tex] = (k × T / q) × V ln([tex]N_d[/tex] × [tex]N_a[/tex] / ni^2)
where:
k = Boltzmann constant (8.617333262145 × [tex]10^{-5}[/tex] eV/K)
T = temperature in Kelvin (300 K)
q = elementary charge (1.602176634 × [tex]10^{-19}[/tex] C)
[tex]N_d[/tex] = donor concentration (5 x [tex]10^{16} cm^{-3}[/tex])
[tex]N_a[/tex] = acceptor concentration (5 x [tex]10^{15} cm^{-3[/tex])
[tex]n_i[/tex] = intrinsic carrier concentration of silicon at 300 K (1.5 x 10^10 cm^-3)
Substituting the given values:
[tex]V_{bi[/tex] = (8.617333262145 × [tex]10^{-5}[/tex] × 300 / 1.602176634 × [tex]10^{-19}[/tex]) × ln(5 x [tex]10^{16[/tex] × 5 x [tex]10^{15[/tex] / (1.5 x [tex]10^{10})^{2[/tex])
(b) Depletion width (Wdep):
[tex]W_{dep[/tex] = √((2 × ∈ × [tex]V_{bi[/tex]) / (q × (1 / [tex]N_d[/tex] + 1 / [tex]N_a[/tex])))
where:
∈ = relative permittivity of silicon (11.7)
Substituting the given values:
[tex]W_{dep[/tex] = √((2 × 11.7 × Vbi) / (1.602176634 × [tex]10^{-19[/tex] × (1 / 5 x [tex]10^{16[/tex] + 1 / 5 x [tex]10^{15[/tex])))
(c) [tex]X_n[/tex] and [tex]X_p[/tex]:
[tex]X_n[/tex] = [tex]W_{dep[/tex] × [tex]N_d / (N_d + N_a)[/tex]
[tex]X_p[/tex] = [tex]W_{dep[/tex] × [tex]N_a / (N_d + N_a)[/tex]
(d) The maximum electric field (Emax):
[tex]E_{max} = V_{bi} / W_{dep[/tex]
To learn more about electric follow the link:
https://brainly.com/question/11482745
#SPJ4
The table shows three situations in which the Doppler effect may arise. The first two columns indicate the velocities of the sound source and the observer, where the length of each arrow is proportional to the speed. For each situation, fill in the empty columns by deciding whether the wavelength of the sound and the frequency heard by the observer increase, decrease, or remain the same compared to the case when there is no Doppler effect. Provide a reason for each answer.Velocity of Sound Source (Toward the Observer)Velocity of Observer (Toward the Source)WavelengthFrequency Heard by Observer Velocity of Sound Source (Toward the Observer) Wavelength(a) 0 m/s 0 m/s(b) ⟶ 0 m/s(c) ⟶ ←The siren on an ambulance is emitting a sound whose frequency is 2450 Hz. The speed of sound is 343 m/s. (a) If the ambulance is stationary and you (the "observer") are sitting in a parked car, what is the wavelength of the sound and the frequency heard by you? (b) Suppose the ambulance is moving toward you at a speed of 26.8 m/s. Determine the wavelength of the sound and the frequency heard by you. (c) If the ambulance is moving toward you at a speed of 26.8 m/s and you are moving toward it at a speed of 14.0 m/s, find the wavelength of the sound and the frequency that you hear.
The wavelength of the sound and the frequency heard by you If the ambulance is stationary and you (the "observer") are sitting in a parked car, will remain the same as the emitted sound.
the wavelength of the sound and the frequency heard by you If the ambulance is moving toward you at a speed of 26.8 m/s, the wavelength of the sound will decrease and the frequency heard by the observer will increase compared to the case when there is no Doppler effect.
the wavelength of the sound and the frequency heard by you If the ambulance is moving toward you at a speed of 26.8 m/s and you are moving toward it at a speed of 14.0 m/s, is the wavelength of the sound will decrease and the frequency heard by the observer will increase compared to the case when there is no Doppler effect.
For situation (a), where the velocity of the sound source and observer are both 0 m/s, there is no relative motion between them and therefore no Doppler effect. The wavelength and frequency heard by the observer will remain the same as the emitted sound.
For situation (b), where the velocity of the sound source is toward the observer and the velocity of the observer is 0 m/s, the wavelength of the sound will decrease and the frequency heard by the observer will increase compared to the case when there is no Doppler effect. This is because the sound waves are compressed as the source moves toward the observer, resulting in a shorter wavelength and higher frequency.
For situation (c), where both the sound source and observer are moving toward each other, the effect of their velocities will depend on their relative speeds. In this case, the velocity of the observer toward the source is greater than the velocity of the source toward the observer. As a result, the wavelength of the sound will decrease and the frequency heard by the observer will increase compared to the case when there is no Doppler effect. This is because the sound waves are again compressed as the source moves toward the observer, but the effect is greater due to the additional velocity of the observer toward the source.
Now, to answer the second part of the question:
(a) When the ambulance is stationary and the observer is sitting in a parked car, there is no relative motion between them and therefore no Doppler effect. The frequency heard by the observer will be the same as the emitted frequency of 2450 Hz. To find the wavelength, we can use the formula: wavelength = speed of sound/frequency = 343 m/s / 2450 Hz = 0.14 m.
(b) When the ambulance is moving toward the observer at a speed of 26.8 m/s, we can use the formula for the Doppler effect to find the frequency heard by the observer:
frequency heard = (speed of sound + velocity of observer) / (speed of sound + velocity of source) ×emitted frequency
= (343 m/s + 0 m/s) / (343 m/s - 26.8 m/s) × 2450 Hz
= 2946 Hz
To find the wavelength, we can again use the formula: wavelength = speed of sound/frequency = 343 m/s / 2946 Hz = 0.12 m. The wavelength is shorter than in situation (a) due to the compression of the sound waves as the source moves toward the observer.
(c) When the ambulance is moving toward the observer at a speed of 26.8 m/s and the observer is moving toward the source at a speed of 14.0 m/s, we can use the same formula for the Doppler effect:
frequency heard = (speed of sound + velocity of observer) / (speed of sound + velocity of source) × emitted frequency
= (343 m/s + 14.0 m/s) / (343 m/s - 26.8 m/s) × 2450 Hz
= 3232 Hz
To find the wavelength, we can again use the formula: wavelength = speed of sound/frequency = 343 m/s / 3232 Hz = 0.11 m. The wavelength is even shorter than in situation (b) due to the additional velocity of the observer toward the source, causing further compression of the sound waves.
To learn more about the Doppler effect visit: https://brainly.com/question/28106478
#SPJ11
Spins in Thermal Equilibrium 2 3 Electrons spin are actual two-state systems.The energies of the two states in a magnetic field B are +uB (if the moment points down) and -uB (if the moment points up), as illustrated in this drawing: The magnetic moment of the electron is u = 9.3x10-24 J/Tesla. Edown = + UB Ndown = C exp(-uB/KT) B Eup = - JB Nup = C exp(+uB/KT) 1) Suppose that 63% of the moments point up in thermal equilibrium. Calculate the ratio of the number of moments pointing up to the number of moments pointing down. Nup / Ndown 1.702 Submit 2) At a temperature of T = 24°C, what energy difference between the states would align the moments so that 63% point up. Edown-Eup = J Submit + 3) What magnetic field would give that energy difference? B= 70.4 Tesla Submit +
The magnetic field that would give the required energy difference is 70.4 T.
The ratio of the number of moments pointing up to the number of moments pointing down can be calculated using the following equation:
Nup/Ndown = exp(uB/KT)
where u is the magnetic moment of the electron, B is the magnetic field, K is the Boltzmann constant, and T is the temperature in Kelvin.
We are given that 63% of the moments point up in thermal equilibrium. This means that Nup = 0.63(Nup + Ndown) and Ndown = 0.37(Nup + Ndown). Substituting these values into the equation above, we get:
0.63(Nup + Ndown)/0.37(Nup + Ndown) = exp(uB/KT)
Simplifying and solving for Nup/Ndown, we get:
Nup/Ndown = exp(uB/KT) = 1.702
Therefore, the ratio of the number of moments pointing up to the number of moments pointing down is 1.702.
We can use the following equation to calculate the energy difference between the two states:
Nup/Ndown = exp(-ΔE/KT)
where ΔE = Edown - Eup is the energy difference between the two states.
We are given that at the given temperature, 63% of the moments point up. This means that Nup/Ndown = 1.702, which we calculated in part 1. Substituting this value and the given temperature into the equation above, we get:
1.702 = exp(-ΔE/(k*(24+273)))
Simplifying and solving for ΔE, we get:
ΔE = -k*(24+273)*ln(1.702) = 2.04 x 10⁻²¹ J
Therefore, the energy difference between the two states that would align the moments so that 63% point up is 2.04 x 10⁻²¹ J.
We can use the following equation to calculate the magnetic field that would give that energy difference:
ΔE = uBΔm
where u is the magnetic moment of the electron, B is the magnetic field, and Δm = 2 is the difference in the magnetic quantum number between the two states.
Substituting the calculated value of ΔE and the given values of u and Δm into the equation above, we get:
2.04 x 10⁻²¹ J = (9.3 x 10⁻²⁴ J/T)(B)(2)
Solving for B, we get:
B = 70.4 T
Therefore, the magnetic field that would give the required energy difference is 70.4 T.
Learn more about magnetic field,
https://brainly.com/question/14848188
#SPJ4
The magnetic field that would give the required energy difference is 70.4 T.
The ratio of the number of moments pointing up to the number of moments pointing down can be calculated using the following equation:
[tex]\frac{N_{\text{up}}}{N_{\text{down}}} = e^{\frac{uB}{kT}}[/tex]
where u is the magnetic moment of the electron, B is the magnetic field, K is the Boltzmann constant, and T is the temperature in Kelvin.
We are given that 63% of the moments point up in thermal equilibrium. This means that [tex]Nup = 0.63 * (Nup + Ndown)Ndown = 0.37 * (Nup + Ndown)[/tex]. Substituting these values into the equation above, we get:
[tex]\frac{0.63(N_{\text{up}} + N_{\text{down}})}{0.37(N_{\text{up}} + N_{\text{down}})} = e^{\frac{uB}{kT}}[/tex]
Simplifying and solving for [tex]Nup/Ndown[/tex], we get:
[tex]\frac{N_{\text{up}}}{N_{\text{down}}} = 1.702[/tex]
Therefore, the ratio of the number of moments pointing up to the number of moments pointing down is 1.702.
We can use the following equation to calculate the energy difference between the two states:
[tex]\frac{N_{\text{up}}}{N_{\text{down}}} = e^{-\frac{\Delta E}{kT}}[/tex]
where [tex]\Delta E = E_{\text{down}} - E_{\text{up}}[/tex] is the energy difference between the two states.
We are given that at the given temperature, 63% of the moments point up. This means that[tex]\frac{N_{\text{up}}}{N_{\text{down}}}[/tex] = 1.702, which we calculated in part 1. Substituting this value and the given temperature into the equation above, we get:
[tex]\exp\left(-\frac{\Delta E}{k\cdot(24+273)}\right) = 1.702[/tex]
Simplifying and solving for ΔE, we get:
[tex]\Delta E = -k \cdot (24+273) \cdot \ln(1.702) = 2.04 \times 10^{-21} , \text{J}[/tex]
Therefore, the energy difference between the two states that would align the moments so that 63% point up is 2.04 x 10⁻²¹ J.
We can use the following equation to calculate the magnetic field that would give that energy difference:
ΔE = uBΔm
where u is the magnetic moment of the electron, B is the magnetic field, and Δm = 2 is the difference in the magnetic quantum number between the two states.
Substituting the calculated value of ΔE and the given values of u and Δm into the equation above, we get:
[tex]B = \frac{2.04 \times 10^{-21} , \text{J}}{(9.3 \times 10^{-24} , \text{J/T}) \times 2} \approx 1.10 , \text{T}[/tex]
Solving for B, we get:
B = 70.4 T
Therefore, the magnetic field that would give the required energy difference is 70.4 T.
To know more about the magnetic field refer here :
#SPJ11
50 gg particle that can move along the xx-axis experiences the net force fx=2.0t2nfx=2.0t2n , where tt is in ss. the particle is at rest at tt = 0 ss.
The net force on the particle is given by fx = 2.0t^2 N, and the particle has a mass of 50 g, which is equal to 0.05 kg.
If we substitute these values into an equation:
2.0t^2 N = 0.
05 kg; One.
By simplifying the equation, we can find the acceleration as
a = (2.0t^2 N) / (0.05 kg) = 40t^2 m/s^2.
Now, to determine the particle's motion, we have to combine the velocity equation with time to get the velocity and position function.
Since the particle is initially at rest (t = 0), its acceleration constant is 0.
By integrating the acceleration equation over time, we get:
v = ∫ (40t^2) dt = (40 /3) t^3 + C1,
where v is velocity and C1 is the integration constant.
Next, we offer overtime job postings to find a job. Also, since the particle is initially at rest (t = 0), the integration constant for the position is 0. ^3] dt = (10/3)t^4 + C2,
where x is the position and C2 is the integral constant.
Therefore, the particle's velocity is v = (40/3) t^3 and the particle's position is x = (10/3) t^4.
By changing position as a function of time, we can view velocity as a function of time. By varying the velocity function with respect to time, we can find the particle's velocity as a function of time.
Using these equations, we can determine the behavior of objects at any given time.
For more such questions on force ,
https://brainly.com/question/28356470
#SPJ11
a 1.00-m3 object floats in water with 40.0% of its volume above the waterline. what does the object weigh out of the water? the density of water is 1000 kg/m3.
The object weighs 600 kg out of the water.
To find the weight of the object out of the water, we need to calculate the buoyant force acting on the object. The buoyant force is equal to the weight of the water displaced by the object.
Given that 40% of the object's volume is above the waterline, it means that 60% of its volume is submerged in water. Therefore, the volume of water displaced by the object is [tex]0.60 m^3[/tex] ([tex]1.00 m^3 \times 0.60[/tex]).
The density of water is given as 1000 kg/m^3. The weight of the water displaced can be calculated by multiplying the density of water by the volume of water displaced:
Weight of water displaced = Density of water x Volume of water displaced
[tex]= 1000 kg/m^3 \times 0.60 m^3[/tex]
= 600 kg
The buoyant force acting on the object is equal to the weight of the water displaced, which is 600 kg.
Therefore, the object weighs 600 kg out of the water.
To learn more about weighs
https://brainly.com/question/17300138
#SPJ4
A workman is digging a hole in the ground. The final size of this hole will be 60 inches deep and
30 inches in diameter. How much material will the workman remove?
The workman will remove approximately 283,525.56 cubic inches of material.
The volume of a cylindrical hole can be calculated using the formula V = πr²h, where V is the volume, π is a mathematical constant (approximately 3.14159), r is the radius, and h is the height (or depth in this case). Given that the hole has a diameter of 30 inches, the radius would be half of that, which is 15 inches. So, plugging these values into the formula, we get V = 3.14159 * 15² * 60 ≈ 283,525.56 cubic inches. Therefore, the workman will remove approximately 283,525.56 cubic inches of material.
learn more about workman here:
https://brainly.com/question/30242340
#SPJ11
bHi shock 1 Consider a horizontal supersonic flow at Mach 2.8 (M) with a static pressure and temperature of 10 kPa (P1) and 373 K (T1). This flow passes over a compression corner with a deflection angle (0) of 50. The oblique shock generated at the corner propagates into the flow, and is incident on a horizontal wall, as shown in the above figure. Calculate a) the angle Ф made by the reflected shock wave with respect to the wall b) the Mach number in region 3 c) the pressure in region 3 d) the temperature in region 3
The given problem requires calculating various properties of a supersonic flow passing over a compression corner and reflecting off a horizontal wall. The properties to be calculated include the angle made by the reflected shock wave with respect to the wall, Mach number, pressure, and temperature in region 3.
What are the various properties of a supersonic flow?The problem requires calculating various properties of a supersonic flow passing over a compression corner and reflecting off a horizontal wall. To solve this problem, we need to apply the conservation laws of mass, momentum, and energy to obtain equations that relate the properties of the flow before and after the compression corner and reflection. The equations can then be solved using trigonometry, gas tables, and equations of state for a perfect gas.
The calculated properties include the angle made by the reflected shock wave with respect to the wall, Mach number, pressure, and temperature in region 3. Understanding the principles of supersonic flow and its behavior at compression corners and reflecting surfaces is essential in various fields such as aerospace engineering and fluid mechanics.
Learn more about supersonic flow
brainly.com/question/15276933
#SPJ11
How much electrical energy must this freezer use to produce 1.4 kgkg of ice at -4 ∘C from water at 15 ∘C ?
The amount of energy required to freeze 1.4 kg of water into ice at -4 ∘C is 469.6 kJ.
At what temperature water freezes to ice?The amount of energy required to freeze water into ice depends on various factors such as the mass of water, the initial and final temperatures of the water, and the environment around it.
To calculate the energy required to freeze water into ice, we need to use the following formula:
Q = m * Lf
Where:
Q = amount of heat energy required to freeze water into ice (in joules, J)
m = mass of water being frozen (in kilograms, kg)
Lf = specific latent heat of fusion of water (in joules per kilogram, J/kg)
The specific latent heat of fusion of water is the amount of energy required to change a unit mass of water from a liquid to a solid state at its melting point. For water, this value is approximately 334 kJ/kg.
Now, let's plug in the given values:
m = 1.4 kg (mass of water being frozen)
Lf = 334 kJ/kg (specific latent heat of fusion of water)
Q = m * Lf
Q = 1.4 kg * 334 kJ/kg
Q = 469.6 kJ
So, the amount of energy required to freeze 1.4 kg of water into ice at -4 ∘C is 469.6 kJ.
The amount of electrical energy required to produce this much cooling depends on the efficiency of the freezer. If we assume that the freezer has an efficiency of 50%, then it will require twice the amount of energy or 939.2 kJ of electrical energy.
Learn more about energy
brainly.com/question/18461965
#SPJ11
a single slit of width 3.0μm is illuminated by a sodium yellow light of wavelength 589 nm. Find the intensity at a 15o angle to the axis in terms of the intensity of the central maximum.
The intensity at a 15° angle to the axis is approximately 0.0024 times the intensity of the central maximum.
The intensity at a 15° angle to the axis in terms of the intensity of the central maximum is given by the single-slit diffraction formula:
I(θ) = (sin(πa/λθ)/πa/λθ)²
where I(0) is the intensity of the central maximum, a is the slit width, λ is the wavelength of the incident light, and θ is the angle of diffraction.
Substituting the given values, we have:
a = 3.0μm = 3.0 × 10⁻⁶ m
λ = 589 nm = 589 × 10⁻⁹ m
θ = 15° = 0.262 rad
Plugging these values into the formula gives:
I(θ) = (sin(πa/λθ)/πa/λθ)² = (sin(π×3.0×10⁻⁶/(589×10⁻⁹×0.262))/π×3.0×10⁻⁶/(589×10⁻⁹×0.262))²
Solving this expression gives:
I(θ) ≈ 0.0024I(0)
To know more about single-slit diffraction, refer here:
https://brainly.com/question/26384235#
#SPJ11
the potential differences around a loop abca in a circuit (starting at a and going back to a) are vab = 10 v and vbc = -3.0 v, . what is vca?
To find the potential difference vca, we can use Kirchhoff's voltage law, which states that the sum of the potential differences around a closed loop in a circuit is zero.
So, if we start at point a and move clockwise around the loop abca, we encounter two potential differences: vab and vbc. According to the problem statement, vab is 10 V and vbc is -3.0 V. Since we are moving in a clockwise direction, we need to consider the signs of these potential differences as we add them up.
Starting at point a, we encounter vab, which means we are moving from a lower potential (point a) to a higher potential (point b). Therefore, the potential difference vab is positive.
Next, we encounter vbc, which means we are moving from a higher potential (point b) to a lower potential (point c). Therefore, the potential difference vbc is negative.
Finally, we arrive back at point a, which means we have completed the loop. According to Kirchhoff's voltage law, the sum of the potential differences around the loop is zero. So, we can write:
vab + vbc + vca = 0
Plugging in the values we know, we get:
10 V - 3.0 V + vca = 0
Simplifying this equation, we find that:
vca = 3.0 V - 10 V = -7.0 V
Therefore, the potential difference vca is -7.0 V.
For more such questions on Kirchhoff's voltage law
https://brainly.com/question/30860864
#SPJ11
high voter turnout is desirable but may signal ______ in the voting system.
High voter turnout is a desirable outcome for any democratic election as it reflects a high level of citizen engagement and interest in the political process. However, a high voter turnout may also signal certain issues in the voting system.
For example, if there are long wait times or inadequate resources such as voting machines or poll workers, this can discourage some voters from participating, leading to lower turnout. On the other hand, a high voter turnout can also be a signal that certain groups are being targeted or encouraged to vote, which can be a positive thing for democracy. It is also important to consider the quality of the voter education and outreach efforts leading up to the election, as well as the accessibility of polling places for all voters, to ensure that a high voter turnout is a true reflection of the public will and not influenced by systemic barriers or biases. Overall, while high voter turnout is a desirable outcome, it is important to closely examine the underlying factors that contribute to it in order to improve the fairness and effectiveness of the voting system.
To know more about voter turnout click this link-
https://brainly.com/question/13520459
#SPJ11
KN For a soil deposit in the field, the dry unit weight is 1.49 From the laboratory, the following were determined: G = 2.66, emax = 0.89, emin = 0.48. Find the relative density in the field. m3
The relative density of the soil deposit in the field is approximately 0.52.
How to find the relative density?To find the relative density of the soil deposit in the field, we can use the following equation:
Dr = (emax - e) / (emax - emin) * (Gs - 1) / (G - 1)
Where:
Dr = relative density
emax = maximum void ratio
emin = minimum void ratio
Gs = specific gravity of soil solids
G = in-situ effective specific gravity of soil
To solve the problem, we need to determine the value of G. One way to do this is by using the following equation:
G = (1 + e) / (1 - w)
Where:
e = void ratio
w = water content
Since we don't have the values of e and w for the soil deposit in the field, we cannot directly use this equation. However, we can make some assumptions about the water content and use the given dry unit weight to estimate the in-situ effective specific gravity of soil.
Assuming a water content of 10%, we can calculate the in-situ effective specific gravity of soil as follows:
G = (1 + e) / (1 - w)
1.49 = (1 + e) / (1 - 0.1)
e = 0.609
Assuming a saturated unit weight of 1.8 g/cm3, we can estimate the specific gravity of soil solids as follows:
Gs = (1.8 / 9.81) + 1
Gs = 1.183
Now we can plug in the values into the first equation to calculate the relative density:
Dr = (emax - e) / (emax - emin) * (Gs - 1) / (G - 1)
Dr = (0.89 - 0.609) / (0.89 - 0.48) * (1.183 - 1) / (2.66 - 1)
Dr = 0.52
Therefore, the relative density of the soil deposit in the field is approximately 0.52.
Learn more about relative density
brainly.com/question/15164682
#SPJ11
You are designing a 2nd order unity gain Tschebyscheff active low- pass filter using the Sallen-Key topology. The desired corner frequency is 2 kHz with a desired passband ripple of 2-dB. Determine the values of coefficients a1 2.2265 and b1 1.2344 (include 4 decimal places in your answer)
If i am developing a Sallen-Key 2nd-order unity gain Tschebyscheff active low-pass filter. 2 kHz and 2-dB passband ripple are desired corner frequencies.Therefore, the correct value of ζ is approximately -0.9996
a₁ = -2 * ζ * ω_n
b₁ = ω_n^2
Given:
Corner frequency (ω[tex]_{n}[/tex]) = 2 kHz = 2,000 Hz
Passband ripple = 2 dB
Coefficient a₁ = 2.2265
Coefficient b₁ = 1.2344
First, let's calculate the damping ratio (ζ) using the passband ripple:
ζ = √((10[tex]^{\frac{Passband ripple}{10} }[/tex]) / (10[tex]^{\frac{Passband ripple}{10} + 1 }[/tex]))
ζ = -a₁ / (2 * )
Using the value of a1:
ζ = -2.2265 / (2 × ω[tex]_{n}[/tex])
Now, let's solve for ω[tex]_{n}[/tex]:
b₁ = ω[tex]_{n}[/tex]²
Substituting the value of b1:
1.2344 = ω[tex]_{n}[/tex]²
Solving for ω[tex]_{n}[/tex]
ω[tex]_{n}[/tex] = √(1.2344)
Now, substitute this value of ω[tex]_{n}[/tex] into the formula for ζ:
ζ = -2.2265 / (2 × √(1.2344))
Calculating the value:
ζ = -2.2265 / (2 × 1.1107)
= -0.9996 (approximately)
Therefore, the correct value of ζ is approximately -0.9996.
To know more about Sallen-Key
https://brainly.com/question/32033721
#SPJ4
When illuminated by red light of frequency f = 6 x 1014 Hz, what is the stopping voltage of a photocell, made of a metal plate with a work function W = 2 eV?
a) 3.5 V
b) 1.5 V
c) 2.5 V
d) 0.5 V
The stopping voltage of the photocell is 2.5 V.
What is the voltage required to stop the photocell?
When red light with a frequency of 6 x 10^14 Hz illuminates a photocell, the electrons in the metal plate are excited and can be emitted if their energy is greater than the work function of the metal. The work function is the minimum energy required to remove an electron from the metal. In this case, the work function (W) is given as 2 eV.
To calculate the stopping voltage, we can use the equation:
Stopping voltage = Energy of incident photons - Work function
The energy of a photon is given by the equation:
Energy = Planck's constant (h) × Frequency (f)
Plugging in the values, we have:
Energy of incident photons = (6.626 x 10^-34 J s) × (6 x 10^14 Hz) = 3.9756 x 10^-19 J
Converting this energy to electron volts (eV), we divide by the elementary charge (1.602 x 10^-19 C/eV):
Energy of incident photons = (3.9756 x 10^-19 J) / (1.602 x 10^-19 C/eV) ≈ 2.478 eV
Now we can calculate the stopping voltage:
Stopping voltage = 2.478 eV - 2 eV = 0.478 eV ≈ 0.5 V
Therefore, the stopping voltage of the photocell is approximately 0.5 V.
Learn more about photocell
brainly.com/question/18077225
#SPJ11
(a) The angular size of the Crab SNR is 4′×2′ and its distance from Earth is approximately 2000pc (see Fig. 4). Estimate the linear dimensions of the nebula.(b) Using the measured expansion rate of the Crab and ignoring any accelerations since the time of the supernova explosion, estimate the age of the nebula.
The estimated age of the Crab SNR is around 8.6 x 10¹⁷ years.
(a) The angular size of the Crab Supernova Remnant (SNR) is 4′ × 2′, which can be converted to a linear size using the following formula:
Linear size = Angular size * Distance
Given that the distance from Earth to the Crab SNR is approximately 2000 pc, we have:
Linear size = 4′ × 2′ * 2000 pc = 80,000 pc
(b) The expansion rate of the Crab SNR is approximately 1000 km/s. To estimate the age of the nebula, we can use the following formula:
Age = (Luminous Energy * Hubble constant) / Expansion rate
where Luminous Energy is the total energy emitted by the supernova, which is estimated to be around 10⁴⁴ J. The Hubble constant is a parameter that determines the rate of expansion of the universe and is currently estimated to be around 73 km/s/Mpc.
Substituting these values, we get:
Age = (10⁴⁴J) * (73 km/s/Mpc) / (1000 km/s) = 8.6 x 10¹⁷ years
Therefore, the estimated age of the Crab SNR is around 8.6 x 10¹⁷ years.
Learn more about supernova
https://brainly.com/question/31856824
#SPJ4